measured instantaneous data: v, i, t, and ah storage and analysis of history data statistics...
TRANSCRIPT
• Measured instantaneous data: V, I, T, and Ah
• Storage and analysis of history data
• Statistics analyses
• Programming of charging and discharge parameters
• Data download onto a PC
• Display on a PC of instantaneous and history data with SmartViewII
Battery Monitor – Charge Control S
MA
RT.I
C+
• Graphic display of voltage and current
• Charge control with Power Saving
• Programmable forks lock because of empy battery
ApplicationsS
MA
RT.I
C+
With SmartCB controls the charging process with power saving
Can lock the FORKS because of empty
battery
Collects and saves all operating data
Power SavingS
MA
RT.I
C+
The cheapest hours to charge battery can be programmed
SMART.IC+ together with SMART.CBCharges battery during the cheapest hours
Restores only the capacity used by the battery
Makes battery life longer
Smart.IC+ System
SmartView IISmart.IC+
Infrared adapter
AP160
SM
AR
T.I
C+
Controlled battery
PC Software
All data collected by Smart.IC+ can be displayed
with a PC program called SmartView II
SM
AR
T.I
C+
Data: MonitorIt is possibile to analize instantaneous data ONLINE
System status
Smart.IC+ panel
Battery level indicator
Battery voltage
Smart.ON inside temperature
SM
AR
T.I
C+
Data: OldGeneral information on the stored cycle
Smart.IC+ related data
Battery rating
Battery state while charging
Date and time of battery charge start
Battery state on discharge
Date and time of battery discharge start
Battery state at cycle start
Battery state at cycle end
SM
AR
T.I
C+
Data: Info OldDetails of the stored cycle
Discharge data Charging data
SM
AR
T.I
C+
Data: DiagramInstantaneous diagrams downloaded by the Smart.IC+ connector ONLINE
Current diagram
Voltage diagram
SM
AR
T.I
C+
Data: AveragesAverages calculated from stored data
Cycles selection
Discharge stage:
Average capacity at the end of the discharge cycle
Discharged average capacity
Average capacity not available
Charging stage:
Average capacity at the end of charging
SM
AR
T.I
C+
Data: StatisticsStatistics collected by Smart.IC+
Statistics collected by Smart.IC+
Battery statistics:
Discharge time
Charging time
Stop time
Statistics collected and faults, if any
SM
AR
T.I
C+
Data: StatisticsStatistics collected by Smart.IC+
Statistics collected by Smart.IC+
Battery statistics:
Discharge time
Charging time
Stop time
Statistics collected and faults, if any
SM
AR
T.I
C+
Data: ProgrammingThe functioning of Smart.IC+ can be customized by using some programming parameters concerning the discharge and charging stage of the traction battery where the connector is installed
Rating
Discharge parameters
General parameters
Charging parametersS
MA
RT.I
C+
Operating range S
MA
RT.I
C+
Voltage size: L Batteries from 24 to 48V
Voltage size: H Batteries from 50 to 96V
DIN 160A connector
Shunt type 2: Capacity 160 – 340Ah
Shunt type 3: Capacity 350 – 740Ah
DIN 320A connector
Shunt type 3: Capacity 350 – 740Ah
Shunt type 4: Capacity 750 – 1300Ah