mechanical events final

8/14/2019 MECHANICAL EVENTS final

1/31

MECHANICAL EVENTS

COME ON AND TRY YOUR GUTS


2/31

INTRODUCTION

The mechanical events are dividedinto three sections

b) Competitionsc) Workshops and seminars

d) Exhibitions

Note: In the following slides we will bepresenting the format of the events,time-table, cost and peoplerequirements.


3/31

We seek our faulty members as ourmentors and humble request theirpresence and valuable guidance inorganising the events


4/31

A) Competitions

In this part of event there will beopen competition of all registeredcandidates as a team.

The decisions will be based on theperformance of the candidates andthe judges decision will be final.

Candidates employing any kind ofunfair means will be disqualified.


5/31

1) Junk-yard wars

This event consists of four rounds

2) Qualifying round

3) League rounds4) Semifinals

5) Finals

Note: The number of members in theteam will be maximum four.


6/31

CLAY MODELING

Clay will be provided to eachparticipants.Time allotted is 30 minutes.Each participant must have to

build there clay model on theirown.Winners will be selected by the

judges for next round

Qualifying round


7/31

League round

Construct a working model from the given junks. The model will be disclosed during the

competition. The participant who achieves the maximum

efficiency in building the model will be awardedextra marks

The participant will have to test his model andwinner will decided on the basis of both testingand building efficiency for the next round.


8/31

BICYCLE De-Assembly Sheet (to be provided to Contestants)

Semifinal round

. In this part of event the qualifiedParticipants will be given the taskof assembling a bicycle whose partswill be scattered and mixed.. They will be provided with asheet to make up the bicycle.. Winner will be the team able

to assemble the bicycle in the leasttime properly.. Maximum teams playing will befour and max time allocated will be

2hrs.


9/31

Grand finals

In this final round of competition wewill be giving our final two teams toassemble a moped within a giventime of 4 hrs.

The actual event will be disclosed tothe participants on the spot.

Winner will the team to complete thegoals taking the least time.


10/31

The event will be held at the workshop.

The requirements of the events will be 2mopeds, 4 bicycles, clay, junks andscraps and some tools, worktables etc.

The cost of organising the event will benearly Rs 35000.

Their will be a requirement of approx 8members as event co-ordinators.


11/31


12/31

Round 1

In this round the participant will havesolve a question paper based on fluidmechanics and machines.

The winners will be only be allowed toparticipate in round 2 on the basis ofmarks obtained.

The time allocated will be 1&1/2hours.


13/31

Round 2

Construct a water turbine from the given junks Inlet water will be given at definite pressure Winner will the participant who achieves the

maximum r.p.m as recorded by tachometer by the

judges. The turbine should be mounted on sliding bearings

and should not be powered by any other source Team can be of maximum three members.


14/31

This event will also be held at theworkshop.

The requirements of the events will be

welding equipments, lathe m/c,tachometer, pipes, metal sheets,mounting bearings, scrap metal pieces.

Cost of the event will be approx

Rs 6000.No of people for organising the event 6.


15/31

3. MISSILE MEN

It is a Team Event (3 Members per Team).

Each Team will be provided with a Soft-drink bottle (plastic), knob, burner and foot-

pump.

They have to fire it (projectile motion).

The Team which reaches nearest to the

Centre of Circle drawn at a distance will be

the Winner.

No Team can use items other than the

provided ones.


16/31


17/31


18/31

JOINTS:

1. Finger Joint2. Dove-tail Joint

3. Mortise and Tenon Joint 4. Mitre Joint


19/31

Workshop will be the venue ofdeciding the skills of the participants.

No of members for organising theevent will be 5.

Cost of the event will be Rs 2000.


20/31

5)Swing the distance

In this event there will be two pulleys kept 2 meters apartand a thread will be wound around them, a paper plate willbe hung to the thread and ball will be placed on the plate

The candidate has to transfer the balls from one end toanother

Winner will be the candidate to transfer the maximum no ofballs in the prescribed time limit. If the string breaks the candidate will be disqualified. If the balls drop out of the plate on the path then that ball

will not be counted. Using other unfair means will lead to disqualification

The pulley will be hand driven. The team participating will be of two members


21/31

The place of attraction will be thesquare uncomplete guard houseinfront of the workshop.The cost of the event willbe Rs 500.No of people required will be 4.Input required will be some two pulleyDiscs, thread, stand, plastic balls etc.


22/31

B) Workshops and seminars

This section will involve workshopsand seminar in the benefit of studentsand to increase the aptitude of thestudents

Two workshops are planned

design studio

personality dynamics


23/31

1)Design studio

This will be a workshop on catiasoftware for design by a guestlecturer open to all students 3rd yearand above.

A model design competition will bedone on autocad for a given diagram.

The winners will be those who takeshortest time and are perfect.


24/31

This event will be held at the seminarhall and computer lab.

No of co-ordinates required are 3 Cost of the event which includes

lecturer fees is nearly Rs 40000.

The workshop will be of 3 days.


25/31


26/31

C) Exhibitions

This is the event which will give newdimensions to the tech-fest.

This will include four events

Engine master Aeromodelling Model presentation Arm robotic

Note: The participants will bring their ownmodels.


27/31

The event will be held at the hall belowseminar hall on ground floor, open fieldnear the workshop where matches havebeen played and workshop.

The cost of the whole exihibition will be Rs5000.

No of coordinators required are 2 for eachevent.

Requirement for fuel and some tables andchairs.


28/31

Paper presentation

Paper presentation is to be held which willbe governed by the faculty and coordinatedby 2 4th year students of each branch.

Venue is proposed to be seminar hall. It will continue for all 3 days.

The participant have two submit a soft andhard copy of there presentation atleastbefore 2 days and give there topic onemonth in advance.


29/31

Certificates will be provided to all thewinners and runnerup of allcompetition and to all the participantsof workshops and exhibitions.


30/31

Time table


31/31

Thank you

For your patience and providing yourvaluable time for attending thepresentation.

I also thank all the faculty members and

specially chairman sir and Sandeep sir forproviding me the opportunity to comeforward and contribute for ongoing events

I will also like to thank all my fellowstudents who supported me at times ofneed.

Lastly I thank HoD sir who gave us valuableideas and guided us all the way.

mechanical events final

Documents