mechanical standards

FOREWORD

The Programme of Work is prepared at the end of every year by each Technical Department of Bureau of Indian Standards to indicate the latest position of published Indian Standards, number of amendments issued on particular published standards, month and year of their last re-affirmation, standards identified for revision or standards in the process of revision etc. It also indicates the draft documents at different stages of processing. This Programme of Work of Mechanical Engineering Division Council (MEDC) has been prepared Sectional Committee-wise as on 1 April 2003 and arranged in the sequential order of the Sectional Committee Number. The scope of MEDC is as under: “Standardization in the field of Mechanical Engineering including mining, boilers, pressure vessels, refrigeration and air conditioning, material handling, chemical engineering and other general engineering such as compressors, gas cylinders, oils and gas burners, water well drilling, pump sets, educational instruments and equipments.” In the Programme of Work an asterisk mark (*) given before a printed standard indicates standard under revision and its relevant document is available at different stage of processing whereas double asterisk mark (**) indicates that standard identified for revision for which document is yet to be prepared. Below a published standard wherever "/ISO..." standard number is given, it implies that the Indian Standard given above is under dual number system with the relevant ISO standard (i.e. adoption of ISO standard). Alternatively, dual number system with the relevant ISO standards are indicated as "IS/ISO..." Similarly, wherever "| ISO...." standard number is given, it implies that the Indian Standard given above is technically equivalent with the relevant ISO standard. A list of superseded/withdrawn standards, standards covered under Certification Marks and those standards published in Hindi and bilingual versions are also enclosed. Aspectwise classification of standards published by MED and harmonization position has also been provided. It is hoped that this publication would provide the community of Indian Standards users a convenient tool for obtaining the latest information about new and upcoming standards in the field of Mechanical Engineering. For any other informations/clarification, please write to:

DIRECTOR & HEAD (MECHANICAL ENGINEERING) BUREAU OF INDIAN STANDARDS

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG NEW DELHI 110 002

Email: bismed@ vsnl.net Fax No. 011-23221535 Phone: 23232509

2

CONTENTS

COMMITTEEWISE PROGRAMME OF WORK OF MECHANICAL ENGINEERING DEPARTMENT (MED)

AS ON 01 APRIL 2003

Sl. SECTIONAL COMMITTEE Page No. Number Name No. 1. ME 01 BOILERS AND PRESSURE VESSELS 1 2. ME 03 REFRIGERATION AND AIR CONDITIONING 2 3. ME 04 NON-CONVENTIONAL ENERGY SOURCES 4 4. ME 06 CONTINUOUS BULK CONVEYING, ELEVATING, 5 HOISTING AERIAL ROPEWAYS AND RELATED EQUIPMENT 5. ME 07 MATERIAL HANDLING SYSTEMS AND EQUIPMENT 9 6. ME 08 MINING TECHNIQUES AND EQUIPMENT 14 7. ME 10 WIRE ROPES AND WIRE PRODUCTS 18 8. ME 14 CRANES, LIFTING CHAINS AND RELATED EQUIPMENT 21 9. ME 16 GAS CYLINDERS 25 10. ME 17 CHEMICAL ENGINEERING PLANTS AND 29 RELATED EQUIPMENT 11. ME 18 CONSTRUCTION PLANT AND MACHINERY 35 12. ME 20 PUMPS 37 13. ME 21 DIAMOND CORE AND WATERWELL DRILLING 39 14. ME 22 COMPRESSORS, BLOWERS AND EXHAUSTERS 41 15. ME 23 DOMESTIC AND COMMERCIAL GAS BURNING 43 APPLIANCES (PRESSURE TYPE) 16. ME 24 SECURITY EQUIPMENT 45 17. ME 25 PRINTING MACHINERY 46 18. ME 26 OIL BURNING APPLIANCES 47 19. ME 27 HANDPUMPS 48 20. ME 28 MECHANICAL VIBRATION AND SHOCK 49 21. ME 29 SEWING MACHINES 52 22. ME 30 GASKETS AND PACKING 55 23. ME 31 OPTICAL AND MATHEMATICAL INSTRUMENTS 57 24. ME 32 PHOTOGRAPHIC EQUIPMENT 64 25. ME 33 UTENSILS, CUTLERY AND DOMESTIC HARDWARE 66 26. ANNEX A LIST OF INDIAN STANDARDS WITHDRAWN/SUPERSEEDED 69 27. ANNEX B LIST OF INDIAN STANDARDS NUMBER AND VALID 74 LICENCEES COVERED UNDER CERTIFICATION 28. ANNEX C LIST OF ASPECTWISE ANALYSIS OF STANDARDS 77 29. ANNEX D LIST OF HINDI AND BILINGUAL INDIAN STANDARDS 78 30. ANNEX E HARMONIZATION POSITION 79

3

ME 01 BOILERS AND PRESSURE VESSELS SECTIONAL COMMITTEE

Scope - a) Formulation of standards for terminology, acceptance tests layout of boilers and other aspects not covered under the Indian Boilers Regulations.

b) Preparation of code for Unfired Pressure Vessels c) Co-ordination of work with ISO/TC 11 Boilers and Pressure Vessels.

SLNO IS.NO./DOC.NO. TITLE REAFFIRM / NO.OF PRINTED AMDTS. STANDARDS PUBLISHED

1 *IS 2825:1969 Code for unfired pressure vessels FEB 02 5 2 IS 8595:1977 Terminology for parameters of stationary steam boilers SEP 01 1 3 IS 8596:1977 Recommended parameters of stationary steam boilers SEP 01 4 IS 8633:1977 Technical requirements for location of boilers installations and boiler SEP 01 1 houses 5 IS 8753:1977 Code for acceptance tests on stationary steam generators of the SEP 01 power station type 6 IS 9330:1979 Terminology for parameters of waste heat boilers and boilers for SEP 01 special purposes 7 IS 9332:1979 Recommended parameters of waste heat boilers and boilers for SEP 01 special purposes 8 IS 9404:2002 Colour code for identification of pipe lines used in thermal AUG 02

power plants (first revision) 9 IS 13445(PT 1):1992 Suppliers data sheet for industrial water tube boilers: Part 1 Proposed SEP 01 stage 10 IS 13445(PT 2):1992 Suppliers data sheet for industrial water tube boilers: Part 2 Post SEP 01 order stage 11 IS 13477:1992 Purchasers data sheet for industrial boilers SEP 01 12 IS 13619:1993 Industrial steam and hot water boiler plants - Maintaining log and JAN 99 summary sheets - Recommendations 13 IS 13979:1994 Method of calculation of efficiency of packaged steam boilers JAN 99 14 IS 13980:1995 Acceptance tests on industrial boilers - Code of practice JAN 99 15 SP:26:1983 ISI steam tables in SI units SEP 01

DRAFT STANDARD COMPLETED WIDE CIRCULATION DOC:MED 1(318) Code for unfired pressure vessels (First revision of IS 2825)

* INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

4

ME 03 REFRIGERATION AND AIR CONDITIONING SECTIONAL COMMITTEE

SCOPE a) Formulation of standards for refrigeration and air- conditioning equipment and appliances including terminology, definitions and symbols, designation of refrigerants, testing of refrigerating systems; refrigerating units.

b) Co-ordination of work with ISO/TC 86 Refrigeration and IEC/TC 61 Safety of household electrical appliances. SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS.

STANDARDS PUBLISHED 1 ** IS 655:1963 Metal air ducts (revised) OCT 99 3

2 IS 659:1964 Safety code for air conditioning (revised) NOV 01 1

3 IS 660:1963 Safety code for mechanical refrigeration (revised) NOV 01

4 IS 1391(PT 1):1992 Room air conditioners: Part 1 Unitary air conditioners (second revision) OCT 99 2 5 IS 1391(PT 2):1992 Room air conditioners: Part 2 Split air conditioners (second revision) OCT 99 2 6 ** IS 1474:1959 Commercial refrigerators OCT 99 7 IS 1475(Pt 1):2001 Self-contained drinking water coolers (Third revision) NOV 01 8 IS 1476(Pt 1):2000 Performance of household refrigerating appliance - Refrigerators JUL 00 with or without low temperature compartment: Part 1 Energy

consumption and performance (third revision) 9 IS 1869:1961 Ice cans NOV 01 10 IS 2167:1983 Bottle coolers (first revision) NOV 01 11 **IS 2370:1963 Sectional cold rooms (walk-in-type) NOV 01 12 IS 2374:1963 Ice tanks NOV 01 13 IS 3315:1994 Evaporative air coolers (desert coolers) (second revision) AUG 99 14 ** IS 3615:1967 Glossary of terms used in refrigeration and air conditioning OCT 99 15. ** IS 4831:1968 Recommendation on units and symbols for refrigeration NOV 01 16 IS 5038:1969 Ice cube trays for domestic refrigerator NOV 01 1 17 IS 5111:1993 Testing of refrigerant compressors (first revision) OCT 99 /ISO 917:1989 18 IS 7613:1975 Method of testing panel type air filters for air conditioning and NOV 01 ventilation purposes 19 IS 7872:1975 Freezers NOV 01 1 20 IS 7896:2001 Data for outside design conditions for air conditioning for NOV 01 1

Indian cities (first revision)


5

21 *IS 8148:1976 Packaged air conditioners SEP 00 2 22 IS 9210:1979 Display cabinets NOV 01 1 23 IS 10594:1983 Thermostatic-expansion valves NOV 01 24 ** IS 10609:1983 Refrigerants - Number designation OCT 99 |ISO 817:1974 25 IS 10617(PT 1):1983 Hermetic compressors: Part 1 High temperature application group NOV 01 2 26 IS 10617(PT 2):1983 Hermetic compressors: Part 2 Medium temperature application NOV 01 2

group 27 IS 10617(PT 3):1983 Hermetic compressors: Part 3 Low temperature application group NOV 01 3 28 IS 11327:1985 Requirements for refrigerants condensing units NOV 01 29 IS 11328:1985 Self contained automatic ice makers NOV 01 30 IS 11329:1985 Finned type heat exchangers for room air conditioners NOV 01 1 31 IS 11330:1985 Refrigeration oil separator NOV 01 32 ** IS 11338:1985 Thermostats for use in refrigerators, air conditioners, water coolers OCT 99 and beverage coolers etc 33 IS 11561:1986 Code of practice for testing of cooling towers NOV 01 34 IS 11951:1987 Pumpset for desert coolers NOV 01 3 35 ** IS 12249:1987 Dessicant driers used in refrigeration FEB 01

DRAFT STANDARDS/AMENDMENTS COMPLETED WIDE CIRCULATION DOC:MED 3(0634) Packaged air conditioners – Specification (first revision of IS 8148) DOC:MED 03(649) Amendment No. 4 to IS 11951:1987 DOC:MED 03(666) Amendment No. 1 to IS 3315:1994

6

ME 4 NON-CONVENTIONAL ENERGY SOURCES SECTIONAL COMMITTEE Scope - a) Formulation of standards in the field of Non-Conventional energy sources such as solar energy, wind energy, bio-gas energy, bio-mass energy etc. b) Co-ordination of work with ISO/TC 180 `Solar Energy’ and IEC/TC 88 `Wind energy’. SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS. STANDARDS PUBLISHED 1 IS 9478:1989 Family size bio-gas plant - Code of practice (second revision) APR 99 2 *IS 12933(PT 1):1992 Solar flat plate collector - Specification: Part 1 Requirements (first FEB 00 2 3 *IS 12933(PT 2):1992 Solar flat plate collector - Specification: Part 2 Components (first revision) FEB 00 3 4 *IS 12933(PT 3):1990 Solar flat plate collector: Part 3 Measuring instruments SEP 00 5 *IS 12933(PT 5):1992 Solar flat plate collector - Specification: Part 5 Test methods (first revision) FEB 00 2 6 IS 12934:1990 Solar energy - Thermal applications - Vocabulary SEP 00 |ISO/DP 9488: 7 IS 12976:1990 Solar water heating systems - Code of practice SEP 00 8 IS 12986(PT 1):1990 Bio-gas plants - Glass fibre reinforced polyester resin gas holders - SEP 00 Specification Part 1 With steel frame 9 IS 13129(PT 1):1991 Solar heating - Domestic water heating systems: Part 1 Performance FEB 00 rating procedure using indoor test methods 10 IS 13129(PT 2):1991 Solar heating - Domestic water heating systems: Part 2 Procedures for FEB 00 system performance characterization and yearly performance predication 11 IS 13129(PT 3):1991 Solar heating - Domestic water heating systems: Part 3 Procedures for FEB 00 system component characterization and predication for yearly performance using component performance data 12 IS 13129(PT 4):1991 Solar heating - Domestic water heating systems: Part 4 Determination FEB 00 of durability and reliability 13 IS 13152(PT 1):1991 Solid bio-mass Chulha - Specification Part 1 Portable (metallic) AUG 02 2 14 IS 13429(PT 1):2000 Solar cooker - Box type - Specification: Part 1 Requirements (first revision) JUN 00 15 IS 13429(PT 2):2000 Solar cooker - Box type - Specification: Part 2 Components (first revision) JUN 00 16 IS 13429(PT 3):2000 Solar cooker - Box type - Specification: Part 3 Test method (first revision) JUN 00 DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT DOC:MED 4(0548) Solar flat plate collector – Part 1 Requirements [second revision of IS 12933 (Pt 1)] DOC:MED 4(0549) Solar flat plate collector – Part 2 Components [second revision of IS 12933 (Pt 2)] DOC:MED 4(0550) Solar flat plate collector – Part 3 Measuring instruments [first revision of IS 12933(Pt 3)] DOC:MED 4(0551) Solar flat plate collector – Part 4 Test methods [second revision of IS 12933 (Pt 5)]

* INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT

7

ME 06 CONTINUOUS BULK CONVEYING, ELEVATING, HOISTING, AERIAL ROPEWAYS AND RELATED EQUIPMENT SECTIONAL COMMITTEE

Scope - a) Formulation of standards for conveyors, vertical hoists, bucket elevators, aerial ropeways amusement/joy rides and related equipment like crushers, screens, vibrating mills etc. and conveyors for personal transportation. b) Co-ordination of work with ISO/TC 101 Continuous Mechanical Handling Equipment. SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO..OF PRINTED AMDTS. STANDARDS PUBLISHED 1 IS 3948:1986 Calibrated high tensile steel (round link) chain (electric butt welded) DEC 98 1 |ISO 610:1990 for chain conveyors and coal ploughs used in mines (first revision) 2 IS 4240:1984 Glossary of conveyors terms and definitions (first revision) DEC 98 |ISO 2148:1974 3 ** IS 4776(PT 1):1977 Troughed belt conveyors: Part 1 Troughed belt conveyors for AUG 99 surface installations (first revision) 4 ** IS 4776(PT 2):1977 Troughed belt conveyors: Part 2 Troughed belt conveyors for AUG 99 1 underground installation 5 IS 5228:2003 Code of practice for the construction of continuous movement AUG 99 monocable ropeways with fixed grips intended for transportation

of passengers 6 IS 5229:1998 Aerial ropeways - Transportation of passengers - Continuous AUG 02 movement monocable with automatic grips - Construction and

design - Code of practice (first revision) 7 IS 5230:2003 Code of practice for the construction of continuous to-and-fro AUG 99 movement bicable ropeways intended for the transportation of passengers 8 IS 5563:1985 Screw conveyors for industrial use (first revision) AUG 00 |ISO 1050:1975 9 IS 5626:1990 Chain conveyors - Connector units, shackle type - Specification AUG 00 |ISO 1082:1990 10 IS 5895:1985 Specification for steel roller conveyors (first revision) AUG 00 11 IS 6832:1985 Specification for fixing screws and fixing washers for buckets for bucket AUG 00

elevators (first revision) 12 IS 6833:1973 Specification for bucket for bucket elevators MAR 02 13 ** IS 6834(PT 1):1973 Conveyor chains, chain wheels and attachments:Part 1 Chains AUG 99 1 14 ** IS 6834(PT 2):1976 Conveyor chains, chain wheels and attachments:Part 2 Chainwheels AUG 99 15 ** IS 6834(PT 3):1976 Conveyor chains, chain wheels and attachments:Part 3 Attachments AUG 99 16 IS 6930:1973 Dimensions for fixing arrangements of buckets for bucket elevators MAR 02 17 IS 7054:1973 Casing for bucket elevators MAR 02 18 ** IS 7155(PT 1):1986 Code of recommended practice for conveyor safety:Part 1 General AUG 99 |ISO 1819:1977 Information (first revision) 19 ** IS 7155(PT 2):1986 Code of recommended practice for conveyor safety:Part 2 General AUG 99 |ISO 1819:1977 safety requirements (first revision)


8

20 ** IS 7155(PT 3):1986 Code of recommended practice for conveyor safety: Part 3 Belt AUG 99 conveyors and feeders (first revision) 21 ** IS 7155(PT 4):1990 Code of recommended practice for conveyor safety: Part 4 Vibrating AUG 99 conveyor/feeder (first revision) 22 ** IS 7155(PT 5):1990 Code of recommended practice for conveyor safety: Part 5 Apron AUG 99 conveyors /Apron feeders (first revision) 23 ** IS 7155(PT 6):1990 Code of recommended practice for conveyor safety: Part 6 Selection, AUG 99 training and supervision of operators (first revision) 24 ** IS 7155(PT 7):1990 Code of recommended practice for conveyor safety: Part 7 Inspection AUG 99

and maintenance (first revision) 25 ** IS 7155(PT 8):1994 Code of recommended practice for conveyor safety Part 8 Flight AUG 99 conveyors scraper conveyors) (first revision) 26 IS 7167:1974 Code for selection and use of bucket elevators MAR 02 27 IS 7423:1974 Dimensions for apron conveyors MAR 02 |ISO 2140:1975 28 ** IS 7465:1974 Portable and mobile troughed belt conveyors AUG 99 29 IS 7649:1975 Glossary of terms used in connection with aerial ropeways and DEC 98 cableways 30 IS 8531:1986 Pulleys for belt conveyors (first revision) DEC 98 |ISO 1536:1975 31 IS 8597:1977 Flat belt conveyors AUG 00 32 IS 8598:1987 Idlers and idler sets for belt conveyors (first revision) DEC 98 |ISO 1537:1975 33 IS 8599:1977 Recommendations for selection of apron conveyors AUG 00 34 IS 8646:1994 Conveyors - Scrapper (flight) - General requirements (first revision) AUG 99 35 IS 8723:1978 Dimensions for vibrating conveyors and feeders with rectangular or DEC 98 |ISO 1049:1975 trapezoidal trough 36 IS 8730:1997 Classification and codification of bulk materials for continuous AUG 02 material handling equipment (first revision) 37 IS 9047(PT 1):1978 Data sheet for aerial ropeways and cableways:Part 1 Data to be MAR 02 supplied by Intending purchaser for aerial system for transportation of goods 38 IS 9047(PT 2):1980 Data sheet for aerial ropeways and cableways:Part 2 Data to be MAR 02 supplied by intending purchaser for aerial system for transportation

of passengers,surface 39 IS 9047(PT 3):1983 Data sheet for aerial ropeways and cableways:Part 3 Data to be DEC 98 supplied by intending purchaser for transportation of passenger, underground 40 IS 9047(PT 4):1983 Data sheet for aerial ropeways and cableways:Part 4 Data to be DEC 98

supplied by intending purchaser for aerial system for transportation of goods, underground

41 IS 9047(PT 6):1980 Data sheet for aerial ropeways and cableways:Part 6 Data to be MAR 02 supplied by intending purchaser for aerial system for transportation

of forestry products

9

42 IS 9228:1979 Mono seat chairs for chairlifts used in winter sports MAR 02 43 IS 9413:1980 Rope guide rollers for haulage ropes of bicable aerial ropeways for MAR 02 transportation of goods 44 IS 9454:1980 Bicable load carriers MAR 02 45 IS 9706:1997 Aerial ropeways for transport of material - Construction and design - AUG 02 Code of practice (first revision) 46 IS 11168(PT 1):1985 Data sheet for aerial ropeways and cableways to be provided to AUG 00 intending purchaser and user Part 1 Data to be supplied for aerial

ropeways system for transportation of goods. surface 47 IS 11592:2000 Code of practice for selection and design of belt conveyors NOV 00 1 48 IS 11619:1986 Scrapers bar for armoured face conveyors DEC 98 |ISO 5612:1990 49 IS 12059:1987 Dimensions for rotary vane feeders DEC 98 |ISO 3922:1978 50 IS 12060:1987 Code of practice for selection of rotary vane feeders DEC 98 51 IS 12101:1987 Roller type hold-back device DEC 98 52 IS 12108:1987 Code of practice for selection of rotary table feeders DEC 98 53 IS 12204:1987 Code of practice for selection of reciprocating feeders DEC 98 54 IS 12215:1987 Code of practice for selection of belt feeders DEC 98 55 IS 12400:1988 Code of practice for selection of electromagnetic feeders DEC 98 56 IS 12401:1988 Code of practice for selection of mechanical vibrating feeders DEC 98 57 IS 12907:1990 Screw feeder – Purchaser’s data sheet AUG 00 58 IS 12941:1990 Code of practice for selection and use of super capacity bucket AUG 00

elevator 59 IS 12959:1990 Technical supply requirements for sprocket wheels for link chains MAR 02 60 IS 12960:1990 Determination of power requirements of screw feeders – General AUG 00 /ISO 7119:1981 requirements 61 IS 12961:1990 U-Link for chains for bucket elevators – Specification AUG 00 62 IS 13324:1992 Screw feeders – General requirements DEC 98 63 ** IS 14169:1994 Recommendations for type selection of feeders AUG 99 64 IS 14188:1994 Conveyor systems - Maintenance facilities - Design parameters AUG 00 65 IS 14386:1996 Belt conveyors - Travelling tripper - Motorised-for belt widths 650 mm MAR 02 to 1600 mm - Dimensions

10

DRAFTS STANDARDS COMPLETED WIDE CIRCULATION DOC:MED 6(0667) Code of recommended practice for amusement rides safety Part 1: General information DOC:MED 6(0668) Code of recommended practice for amusement rides safety Part 2: Safety requirements DOC:MED 6(0669) Code of recommended practice for amusement rides safety Part 3 Design, manufacture and erection DOC:MED 6(0670) Code of recommended practice for amusement rides safety Part 4: Selection, training and supervision of operators DOC:MED 6(0671) Code of recommended practice for amusement rides safety

Part 5: Operation and maintenance procedures DOC:MED 6(0688) Code of recommended practice for amusement rides safety Part 6: Performance tests

11

ME 07 MATERIAL HANDLING SYSTEMS AND EQUIPMENT SECTIONAL COMMITTEE

Scope - 1) Formulation of standards for terminology, general design and construction, classification, ratings, leading dimensions, safety code of operation and maintenance and testing and inspection methods of mechanical, pneumatic and hydraulic bulk handling systems and equipment for loose bulk material including fluid material and unit loads (other than those

covered by Conveyors, Vertical Hoists and Bucket Elevators Sectional Committee, MED 6) such as:

a) Unloading equipment such as wagon tipplers, wagon marshalling equipment, wagon unloading equipment and ship un-loaders

b) Stacking and loading equipment such as stackers, reclaimers, ship, wagon and truck loaders

c) Hydraulic conveying equipment such as coal and ash conveying equipment

d) Pneumatic conveying equipment such as food grains, cement, fertilizer, ash and pulverized conveying equipment; e) Batching and bagging equipment such as automatic bag filling machines and automatic weighing and bagging equipment f) Earth-moving machinery and equipment. g) Non-powered material handling equipment such as hand-trucks, platform trucks,

Lifting tables, pallet trucks, stillage lifting trucks and all types of trolleys, wheel barrows

2) Co-ordination of work with ISO/TC 127 `Earth Moving, Machinery’ and ISO/TC 110 `Industrial Trucks”.

SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS.

STANDARDS PUBLISHED 1 IS 2431:1963 Steel wheel barrows (single wheel type) NOV 01

2 IS 4184:1967 Steel wheel barrows (with two wheels) NOV 01 1 3 IS 4988(PT 1):1969 Glossary of terms and classification of earth moving machinery: Part 1 NOV 01 General terms 4 IS 4988(PT 2):1968 Glossary of terms and classification of earth moving machinery: Part 2 NOV 01 Dozers 5 IS 4988(PT 3):1968 Glossary of terms and classification of earth moving machinery: Part 3 NOV 01 Motor and towed scrappers 6 IS 4988(PT 4):1968 Glossary of terms and classification of earth moving machinery: Part 4 NOV 01 Excavators 7 IS 4988(PT 5):1968 Glossary of terms and classification of earth moving machinery: Part 5 NOV 01 Motor graders

� INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED /INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

13

8 1IS 5007:1988 Dimensions for hand pallet trucks (first revision) SEP 01 |ISO/R 509:1966 9 IS 5324:1996 Hand operated stillage truck - Lifting truck (hand elevating) - SEP 01 Specification (second revision) 10 IS 5387:1969 Dimensions for stillages NOV 02 2 |ISO 1756:1975

11 IS 5972:1970 Glossary of pneumatic and hydraulic conveyor terms and definitions AUG 00 12 IS 6839(PT 1):1994 Glossary of terms relating to non-powered materials handling SEP 01 /ISO 2163:1975 equipment, Part 1 Castors and wheels (first revision) 13 IS 6839(PT 2):1998 Glossary of terms relating to non-powered materials handling NOV 98 equipment, Part 2 Hand trucks and trolleys (first revision) 14 IS 7261:1985 Dimensions of top-plates for castors (first revision) SEP 01 |ISO 2184:1972 15 IS 7369:1983 Specification for wheels and castors (first revision) SEP 01 1

|ISO 2175:1981 16 IS 7439:1974 Dimensions for aero slides FEB 99 |ISO 2326:1972 17 IS 8015:1996 Hand trolley for oil drums (first revision) SEP 01 18 IS 8016:1996 Hand trolley for gas cylinders (oxygen and dissolved acetylene) for SEP 01 industrial use (first revision) 19 IS 8049:1988 Specification for platform trucks (second revision) SEP 01 20 IS 8647:1977 Design criteria for pneumatic conveying systems AUG 00 21 IS 9248:1996 Earth moving machinery - Units for dimensions, performance and NOV 01 /ISO 9248:1992 capacities and their measurement accuracies 22 IS 9776:1981 Data sheet for selection of weighing-cum-tipping/bag filling NOV 01 machines for bulk handling equipment 23 IS 9777:1981 Data sheet for selection of weigh bridges for bulk handling NOV 01 equipment 24 IS 10095:1982 Guidelines for selection of tipplers for broad gauge open railway wagons NOV 01 |ISO 3265:1974 25 IS 10223:1982 General requirements for tow-castors system for transportation of NOV 02 freight containers 26 IS 10280:1993 Earth-moving machinery - Operation and maintenance - Format FEB 99 / ISO 6750:1984 and content of manuals (first revision) 27 IS 10303:1993 Earth moving machinery - Preservation and storage (first revision) FEB 99 /ISO 6749:1984 28 IS 10443:1983 Data sheet for selection of marine loading arms NOV 99 29 IS 10463(PT 2):1985 Glossary of terms for bulk handling equipment: Part 2 Stacking NOV 99 loading and eclaiming equipment 30 IS 10463(PT 6):1983 Glossary of terms for bulk handling equipment Part 6 Cyclic loose FEB 99 bulk hand ling equipment (non-stationary) 31 IS 10464:1983 Data sheet for selection of wagon puller/pusher FEB 99 1 32 IS 10506:1996 Trolleys for carrying jute bales - Specification (First Revision) SEP 01 33 IS 10525:1983 Specification for general purpose drinking water trolley SEP 01

14

34 IS 10678:1983 Data sheet for design and selection of vacuum producer FEB 99 35 IS 10689:1993 Earth moving machinery - Minimum access dimensions (first revision) FEB 99 / ISO 2860:1992 36 IS 10704:1999 Earth moving machinery - Access system (second revision) JUN 99 /ISO 2867:1994 37 IS 10856:1993 Earth-moving machinery - Elevating scrapers - Volumetric ratings FEB 99 /ISO 6484:1986 (first revision) 38 IS 10859:1993 Earth-moving machinery - Dumper bodies - Volumetric ratings (first FEB 99 /ISO 6483;1980 revision) 39 IS 11113:1999 Earth moving machinery and tractors and machinery for agriculture NOV 99 / ISO 5353:1995 and forestry - Seat index point (second revision) 40 IS 11114(PT 2):1993 Earth-moving machinery - Definitions of dimensions and symbols: FEB 99 /ISO 6746-1:1987 Part 2 Base machines (first revision) 41 IS 11114(PT 3):1993 Earth-moving machinery - Definitions of dimensions and symbols: FEB 99 /ISO 6746-2:1987 Part 3 Equipment(first revision) 42 IS 11114(PT 4):1993 Earth-moving machinery - Definitions of dimensions and symbols: FEB 99 /ISO 7131:1984 Part 4 Loaders (first revision) 43 IS 11115:1999 Earth moving machinery - Human physical dimensions of operators AUG 99 / ISO 3411:1995 and minimum operator space envelop (first revision) 44 IS 11249:1985 Data sheet for selection of front end loaders NOV 99 45 IS 11252:1993 Earth-moving machinery - Zones of comfort and reach for controls FEB 99 /ISO 6682:1986 (first revision) 46 IS 11496:1985 General and performance test requirements of pallet truck and SEP 01 stillage truck 47 IS 11737:1996 Bag stitching machines - Specification (first revision) AUG 00 48 IS 11738(PT 1):1993 Bulk handling equipment - Crawler tractors - Data sheet : Part 1 FEB 99 Information to be supplied by purchaser (first revision) 49 IS 11738(PT 2):1993 Bulk handling equipment - Crawler tractors - Data sheet, Part 2 FEB 99 Information to be supplied by manufacturers/suppliers (first revision) 50 IS 12137:1987 General requirements of wagon puller/pusher NOV 02 51 IS 12138:1993 Earth-moving machinery - Basic types - Vocabulary (first revision)) FEB 99 /ISO 6165:1987 52 ** IS 12140:1987 Data sheet for selection of dumpers NOV 99 53 IS 12192:1993 Earth-moving machinery - Hydraulic excavators - Hoe type buckets - FEB 99 /ISO 7451:1983 Volumetric ratings (first revision)) 54 IS 12206:1993 Earth-moving machinery - Loader and front loading excavator FEB 99 /ISO 7546:1983 buckets - Volumetric ratings (first revision) 55 IS 12209:1993 Earth-moving machinery - Guide to procedure for operator training FEB 99 /ISO 7130:1981 (first revision) 56 IS 12359:1988 Guide for selection of wheels and castors SEP 01 57 IS 12402(PT 1):1988 Mobile containers for solid waste, Part 1 General characteristics SEP 01

58 IS 12402(PT 2):1988 Mobile containers for solid waste, Part 2 Methods of test SEP 01 59 IS 12567:1989 Pneumatic handling equipment - Bends - Dimensions FEB 99 |ISO 3284:1974 60 IS 12645:1993 Earth-moving machinery - Crawler and wheel tractor dozer blades - FEB 99

15

/ISO 9246:1988 Volumetric ratings (first revision) 61 IS 12663(PT 1):1989 Bulk handling equipment - Reclaimer - Data sheet for selection: Part 1 FEB 99 Scraper reclaimer (Rail Mounted) 62 IS 12669(PT 1):1989 Bulk handling equipment - Hydraulic excavator - Data sheet for FEB 99 selection 63 IS 12663(Pt 2):1999 Bulk handling equipment – Reducer - Data sheet for bucket wheel FEB 00 reclaimer (rail mounted): Part 2 Information to be supplied by the purchaser 64 IS 12663(Pt 3):2000 Bulk handling equipment – Reducer - Data sheet for bucket wheel FEB 00 reclaimer (rail mounted): Part 3 Information to be supplied by the manufacturer 65 IS 13065:1991 Bulk handling equipment - Wagon marshalling equipment - Endless NOV 01 rope type - General requirements 66 IS 13076:1991 Specification for hand trolley for carrying mail bags NOV 02 67 IS 13081:1991 Earth moving machinery - Symbols - Guidelines for development and NOV 01 evaluation 68 IS 13082(PT 1):1991 Bulk handling equipment - Ship unloader - Gantry mounted grab NOV 01 type - Code of practice for design, manufacture and erection: Part 1 Mechanical and structural requirements 69 IS 13082(PT 2):1991 Bulk handling equipment - Ship unloader - Gantry mounted grab NOV 01 type - Code of practice for design, manufacture and erection, Part 2

Electro-mechanical -Requirements

70 IS 13082(PT 3):1991 Bulk handling equipment - Ship unloader - Gantry mounted grab NOV 01 type - Code of practice for design, manufacture and erection,

Part 3 Information to be supplied by purchaser and the manufacturer 71 IS 13113:1991 Bulk handling equipment - Wagon marshalling equipment - Endless NOV 01 rope type - Data sheet 72 I S 13116:1999 Earth moving machinery - Engine test code - Net power DEC 99 /ISO 9249:1997 73 IS 13148(Pt 1):1999 Mobile equipment for continuous handling of bulk materials JUL 99 /ISO 5049-1:1994 Part 1 - Rules for the design of steel structures (first revision) 74 IS 13253:1992 Earth-moving machinery - Diagnostic ports FEB 99 /ISO 8925:1989 75 IS 13652:1993 Bulk handling equipment - Dumper - Supplier's data sheet FEB 99 76 IS 13685(PT 1):1993 Bulk handling equipment - Ship loader - Data sheet for selection Part 1 FEB 99 information to be supplied by the purchaser 77 IS 13685(PT 2):1993 Bulk handling equipment - Ship loader - Data sheet for selection Part 2 FEB 99 Information to be supplied by manufacturer/supplier 78 IS 13768:1999 Earth moving machinery - Laboratory evaluations of protective NOV 02 /ISO 3164:1995 structure - Specification for deflection limiting volume

(first revision) 79 IS 13769:1993 Earth moving machinery - Falling-object protective structures - FEB 99 /ISO 3449:1992 Laboratory tests and performance requirements 80 IS 13811:1993 Air cargo (bulk) trolley - Specification SEP 01 81 IS 13936:1994 Bulk handling equipment - Wheeled loaders - General requirements FEB 99 82 IS 13945:1994 Bulk handling equipment - Bagging machines (electronic type) - NOV 99

Data sheet 83 IS 13951:1994 Heavy item lift platform for Aircraft/Airport operations - General SEP 01 requirements

16

84 IS 13989:1994 Bulk handling equipment - Bagging machines (mechanical type) - NOV 99 Design and construction - General requirements 85 IS 13992:1994 Bulk handling equipment - Bagging machines (electronic type) - NOV 99 Design and construction - General requirements 86 IS 14130:1994 Hydraulic lifting table - Specification SEP 01 87 IS 14416:1996 Bulk handling equipment - Bucket wheel reclaimer rail mounted type - NOV 01 Design, manufacture and erection - Code of practice 88 IS 14417:1996 Bulk handling equipment - Single boom slewable stacker – NOV 01

Rail mounted - Design, manufacture and erection – Code of practice

89 IS 14418:1996 Bulk handling equipment - Ship loader - Rail mounted - Design, NOV 01

manufacture and erection – Code of practice 90 IS 14704:1999 Bulk handling equipment - Bag stacker-cum-loader - Portable – JUN 99

Design and construction – General requirements

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT DOC:MED 7(006) Bulk handling equipment - Stacker (Rail mounted) Part 1 General requirements DOC:MED 7(514) Bulk handling equipment - Stacker (rail mounted) Part 2 Information to be

supplied by the purchaser DOC:MED 7(515) Bulk handling equipment - Stacker (rail mounted) Part 3 In formations to be

supplied by the manufacturer

17

ME 08 MINING TECHNIQUES AND EQUIPMENT SECTIONAL COMMITTEE

Scope - a) Formulation of Indian Standards relating to basic mining techniques and equipment. b) Coordination of work with ISO/TC 82 `Mining' SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS.

STANDARDS PUBLISHED 1 IS 3820:1982 Tungsten carbide tipped coal cutting picks (first revision) JAN 99 2 IS 4001:1995 Mine tubs - Specification (second revision) AUG 00 3 IS 4005:1967 Tungsten carbide for mining tools OCT 99 1 4 **IS 4791:1968 Glossary of mining terms (drainage) OCT 99 5 ** IS 4792:1968 Glossary of mining terms (ventilation) OCT 99 6 ** IS 4863:1968 Glossary of mining terms (drilling and blasting) OCT 99 7 ** IS 5028:1969 Glossary of mining terms (planning and surveying) OCT 99

8 ** IS 5114:1969 Reflectorized signs for mines OCT 99

9 ** IS 5307:1969 Glossary of mining terms (boring and exploration) OCT 99 10** IS 5767:1970 Glossary of mining terms (strata control OCT 99 11** IS 5768:1970 Glossary of mining terms (winning and working) OCT 99 12 ** IS 5814:1970 Glossary of mining terms (shaft and associated equipment) OCT 99 13 ** IS 5940:1970 Glossary of mining terms (geology) OCT 99 14 IS 7577:1986 Gas testing flame safety lamps (first revision) OCT 99 1 15 IS 7578:1975 Wedge and slot type roof bolt AUG 00 16 **IS 7580:1975 Glossary of mining terms (transport) OCT 99 17 IS 7586:1975 Friction props for mines OCT 99 1 18 * IS 7587(PT 1):1975 Cage suspension gear for winding in mines Part 1 General OCT 99 2 requirement 19 ** IS 7587(PT 2):1975 Cage suspension gear for winding in mines Part 2 Capples OCT 99 1 20 ** IS 7587(PT 3):1980 Cage suspension gear for winding in mines Part 3 Shackles OCT 99 1 and pins 21 ** IS 7587(PT 4):1975 Cage suspension gear for winding in mines Part 4 Bridle chains OCT 99 3


18

22 ** IS 7587(PT 5):1976 Cage suspension gear for winding in mines Part 5 OCT 99 2 Equalizing plates 23 ** IS 7587(PT 6):1984 Cage suspension gear for winding in mines Part 6 Safety OCT 99 detaching hooks (4 plate type) 24 IS 7587(Pt 7):2000 Cage suspension gear for winding in mines Part 7 Safety OCT 00 detaching hooks (4 plate type) 120, 170 and 200 kN capacity 25 IS 7587(PT 8):1993 Winding in mines - Suspension gear part 8 Clivey hook JAN 99 suspension arrangements 26 IS 7974(PT 1):1976 Graphical symbols for use on detailed maps, plans and OCT 99 |ISO 710-1:1974 geological cross sections:Part 1 General rules of

representation 27 IS 7974(PT 2):1977 Graphical symbol for use on detailed maps, plans and OCT 99 |ISO 710-2:1974 geological cross sections Part 2 Representation of

sedimentary rocks 28 IS 7974(PT 3):1976 Graphical symbols for use on detailed maps, plans and JAN 99 |ISO 710-3:1974 geological cross sections: Part 3 Representation of

magnetic rocks 29 IS 8003:1976 Wheel axle assemblies for mine cars OCT 99 1 30 IS 8066:1976 Mine cars OCT 99 1 31 IS 8166:1988 Rotary drill bits for drilling principally in coal JAN 99 |ISO 1717:1974 32 **IS 8266:1976 Expansion shell type roof bolts OCT 99 33 IS 8421:1977 Hydraulic props OCT 99 34 IS 8473:1988 ink bars used in mines (first revision) JAN 99 35 IS 8534(PT 1):1994 Mine tub couplings and drawbars Part 1 General JAN 99 requirements (first revision) 36 IS 8534(PT 2):1995 Mine tub couplings and drawbars: part 2 C link and AUG 00 D-shackle type (first revision) 37 IS 8534(PT 3):1995 Mine tub couplings and drawbars Part 3 R-Shackle and link AUG 00 type (first revision) 38 IS 8534(PT 4):1995 Mine tub couplings and drawbars Part 4 F-Shackle and link AUG 00 type (first revision) 39 IS 8534(PT 5):1995 Mine tub couplings and drawbars: Part 5 Drawbars AUG 00 40 IS 8534(PT 6):1995 Mine tub couplings and drawbars: Part 6 Hook and D-shackle AUG 00 type 41 IS 9011:1978 Skip p suspension gear for winding in mines OCT 99 1 42 IS 9123:1979 Battery locomotives for use in mines AUG 00 43 IS 9170(PT 1):1979 Endless haulage clips: Part 1 General requirements AUG 00 44 IS 9171:1979 Code of practice for maintenance and use of friction and OCT 99

hydraulic props and link bars 45 IS 9192:1979 Flame proof hand-held rotary drilling machine for use in mines OCT 99 46 ** IS 9203(PT 1):1979 Friction rollers for mine haulage tracks: Part 1 Technical supply OCT 99 conditions 47 ** IS 9203(PT 2):1979 Friction rollers for mine haulage tracks: Part 2 Parallel rollers OCT 99

19

48 ** IS 9203(PT 3):1979 Friction rollers for mine haulage tracks: Part 3 Tapered and OCT 99

vertical rollers and horizontal and vertical 49 ** IS 9203(PT 4):1979 Friction rollers for mine haulage tracks: Part 4 Rollers with OCT 99 non-metallic rope bearings surfaces 50 ** IS 9227:1979 Friction roller mountings for mine haulage tracks OCT 99 51 IS 9239:1999 Cast sheaves for winding in mines (first revision) SEP 99 1 52 IS 9494:1980 Manriding cars used in mines AUG 00 53 IS 9910:1981 Method for braze strength testing of coal and rock cutting OCT 99 ools with laid-on tungsten-carbide tips 54 IS 9999:1981 Diesel locomotives for use in mines JAN 99 1 55 IS 10046:1981 Dog spikes for mine haulage tracks JAN 99 56 IS 10202:1982 scrapers used in mines JAN 99 57 IS 10970:1984 Keps for mine cages AUG 00 58 IS 11311:1985 Technical requirements for loaders for use in underground OCT 99 mines 59 IS 11862:1986 Hydraulic loadcell AUG 00 60 IS 11922:1986 Portable mine hoist JAN 99 61 IS 12450(PT 1):1988 Steel headframes for mines Part 1 Principles of load JAN 99 computation and applicable factors of safety 62 IS 12464:1988 Methods of test for roof bars used in mines OCT 99 63 IS 12488:1988 Haulage rope cappels JAN 99 64 IS 12489:1988 Recommendations for fitting terminal wire rope sockets by J AN 99 the cone and ail method 65 IS 12526:1988 Specification for bucket for shaft sinking operations in mines JAN 99 66 IS 12527:1988 General requirements for riders for buckets used in shaft JAN 99 sinking operations in mines 67 IS 13163:1991 Mine haulage tracks - Laying - Code of practice AUG 00 68 IS 13201:1991 Mine haulage traacks - Rails and fish plates - AUG 00

General requirements 69 IS 13202:1992 Mine haulage tracks - General requirements JAN 99 70 IS 13210:1991 Mine haulage tracks - Switches and crossings - AUG 00 General requirements 71 IS 13219:1992 Rock bolts for mines (cement grouted) - General JAN 99

r equirements 72 IS 13220:1990 Friction props – Hydraulic setting device – General OCT 99 requirements 73 IS 13230:1992 Graphical symbols for use on mine plans JAN 99 74 IS 13282:1991 Mine haulage tracks - Track sleepers - General requirements AUG 00 75 IS 13517:1992 Rock bolts - Resin type - Specification JAN 99 76 IS 13618:1992 Mine haulages - Direct rope (50 to 150 kW) - General JAN 99

requirements

20

77 IS 14352:1996 Miners safety goggles - Specification SEP 01 78 **IS 14480:1998 Side dump loader (SDL) - Operation and maintenance – FEB 03

Code of practice 79 IS 14567:1999 Winding in mines - Design of cages - Guideline AUG 98 80 IS 14778:2000 Optical methanometer (Inteferrometer type) - Portable – MAR 00 Specification

DRAFT STANDARD APPROVED FOR WIDE CIRCULATION DOC: ME 08(0717) Cage suspension gear for winding in mines - Specification Part 1 General requirements [first revision of

21

ME 10 WIRE ROPES AND WIRE PRODUCTS SECTIONAL COMMITTEE Scope - a) Formulation of standards on wire ropes and standards for strands for different purposes;

wire products, wire ropes and fittings. b) Co-ordination of work with ISO/TC 82 Mining and ISO/TC 105 Wire ropes. SL NO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS. STANDARDS PUBLISHED 1 ** IS 278:1978 Galvanized steel barbed wire for fencing (third revision) OCT 01 4 2 * IS 1855:1977 Stranded steel wire ropes for winding and man riding haulages DEC 99 1 in mines (first revision) 3 **IS 1856:1977 Steel wire ropes for haulage purposes (second revision) OCT 01 4 IS 2140:1978 Stranded galvanized steel wire for fencing (first revision) OCT 01 5 IS 2141:2000 Hot dip galvanized stray strand - Specification (fourth revision) DEC 00 6 **IS 2265:1978 Galvanized steel wire strand for signalling purpose (first revision) OCT 01 1 7 IS 2266:2002 Steel wire ropes for general engineering purposes (fourth revision) SEP 02 |ISO 2408:1973 8 IS 2315:1978 Thimbles for wire ropes (first revision) OCT 01 9 IS 2361:2002 Bulldog grips - Specification (third revision) AUG 02 10 IS 2363:1981 Glossary of terms relating to wire ropes (first revision) OCT 01 11 IS 2365:1977 Steel wire suspension ropes for lifts, elevators and hoists (first revision) OCT 01 12 IS 2485:1979 Drop forged sockets for wire ropes for general engineering purposes OCT 017 (first revision) 13 IS 2581:2002 Round strand galvanized steel wire ropes for shipping purposes SEP 02 (fourth revision) 14 *IS 2721:1979 Galvanized steel chain link fence fabric (first revision) OCT 01 1 15 IS 2759:1969 Higher tensile steel point hooks for use with wire rope thimbles JUL 02 2 16 * IS 2762:1982 Wire ropes slings and sling legs (first revision) OCT 01 17 IS 3121:1981 Rigging screws and stretching screws (first revision) OCT 01 1 18 **IS 3374:1983 Preformed steel wire ropes for aircraft controls (first revision) OCT 01 |ISO 2020:1973 19 **IS 3459:1977 Small wire ropes (first revision) OCT 01 20 IS 3623:1978 Guide and rubbing ropes (first revision) OCT 01 1 21 IS 3626:2001 Locked coil winding ropes – Specification (second revision) JAN 01 22 IS 3937(PT 1):1974 Recommendations for socketing of wire ropes :Part 1 Socketing OCT 01 |ISO 3189-1:1977 with zinc (first revision)


22

23 IS 3937(PT 2):1974 Recommendations for socketing of wire ropes: Part 2 Socketing with white OCT 01 metal (first revision) 24 IS 3937(PT 3):1994 Recommendations for socketing of wire ropes Part 3 Socketing with resins JAN 99 25 ** IS 3973:1984 Code of practice for the selection, installation and maintenance of wire OCT 01 ropes (first revision) 26 IS 4507:1978 Yacht ropes (first revision) OCT 01 27 IS 4521:2001 Wire ropes used in oil wells and oil well drilling (second revision) NOV 01 28 IS 5202:1969 Flat hoisting wire ropes used in mines OCT 01 29 IS 5203:1969 Flat balancing wire ropes use in mines APR 96 30 IS 5245(PT 1):1969 Methods for splicing of wire ropes Part 1 Hand splicing of wire ropes OCT 01 31 IS 5245(PT 2):1971 Methods for splicing of wire ropes : Part 2 Wire rope sling legs with OCT 01 2 ferrule-secured eye terminal 32 IS 5836:1977 Inner wire ropes for automobile control cables (first revision) OCT 01 33 IS 6594:2001 Technical supply conditions for steel wire ropes and strands (second DEC 01 |ISO 2408:1973 revision) 34 IS 9282:2002 Wire ropes and strands for suspension bridges (first revision) AUG 02 35 IS 10887:2001 Steel wire rope for winches and ropeways used in forestry and agriculture DEC 01 (first revision) 36 IS 10891(PT 1):2001 Steel wire ropes for aerial ropeways Part 1 Haulage ropes (first revision) DEC 01 37 ** IS 10891(PT 2):1986 Steel wire ropes for aerial ropeways Part 2 Track ropes OCT 01 38 IS 10942:2000 Ferrules - Specification (first revision) DEC 00 39 **IS 12694:1993 Large diameter steel wire ropes (first revision) JUL 02 40 IS 12735:1994 Wire rope slings - Safety criteria and inspection procedures for use JAN 99 /ISO 8792:1986 (first revision) 41 IS 12776:2002 Galvanized strand for earthing (first revision) JUN 02 42 IS 13869:1993 High breaking load steel wire ropes - Specification JUL 02 /ISO 10092:1990 43 IS 13870(PT 1):1993 Cranes and lifting appliances - Selection of wire ropes Part 1 General JUL 02 /ISO 4308-1:1986 44 IS 13870(PT 2):1993 Cranes and lifting appliances - Selection of wire ropes: Part 2 Mobile JUL 02 /ISO 4308-2:1988 cranes - Coefficient of utilization 45 IS 13902(PT 1):1993 Sockets for wire ropes for general purposes: Part 1 General JUL 02 /ISO 3189-1:1985 characteristics and conditions of acceptance 46 IS 13902(PT 2):1993 Socket for wire ropes for general purposes: Part 2 Special requirements JUL 02 /ISO 3189-2:1985 for sockets produced by forging or machined from the solid 47 IS 13902(PT 3):1993 Socket for wire ropes for general purposes: Part 3 Special requirements JUL 02 /ISO 3189-3:1985 for sockets produced by casting 48 * IS 13917:1994 Stranded wire ropes for mine hosting - Technical delivery requirements JAN 99 /ISO 3154:1988

23

DRAFT STANDARDS UNDER PRINT DOC:MED 10(617) Standards steel wire ropes for winding and man riding – Haulages in mines (second revision of IS 1855) DOC:MED 10(620) Stranded wire ropes for hoisting – Technical delivery requirements (first revision of IS 13917) DOC:MED 10(623) Galvanized steel chain link fence fabric (second revision of IS 2721)

DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC::MED 10(421) Wire ropes slings and sling legs (second revision of IS 2762)

24

ME 14 CRANES, LIFTING CHAINS AND ITS RELATED EQUIPMENT SECTIONAL COMMITTEE

SCOPE - a) Standardization of cranes, winches, lifting chains, sheaves suspension gears, hooks, swivel and shackles.

b) Co-ordination of work with ISO/TC 111, Round steel link chains, lifting hooks and accessories and ISO/TC 96 Cranes, lifting appliances and related equipment. SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS. STANDARDS PUBLISHED 1 * IS 807:1976 Code of practice for design, manufacture, erection and testing MAR 00 1 (structural portion) of cranes and hoists (first revision) 2 IS 2429(PT 1):1987 Round steel short link chains (electric butt welded), Grade L(3), Part 1 JAN 03 Non-calibrated load chains for lifting purposes (third revision) 3 IS 2758:1969 Mild steel point hooks for use with wire rope thimbles JAN 03 4 IS 2760:1980 Steel chain slings (first revision) MAR 00 2 5 IS 3109(PT 1):1982 Short link chain, Grade M (4), Part 1 Non-calibrated load chain for JAN 03 1 lifting purposes (second revision) 6 IS 3109(PT 2):1982 Short link chain, Grade M (4), Part 2 Calibrated load chain for pulley JAN 03 blocks and other lifting appliances (second revision) 7 IS 3177:1999 Code of practice for electric overhead travelling cranes and gantry FEB 99 1 cranes other than steel work cranes (second revision) 8 IS 3813:1967 'C' hooks for use with swivels JAN 98 9 *IS 3815:1969 Point hooks with shank for general engineering purposes MAR 00 1 10 IS 3822:2002 Eye hooks for use with chains - Specification (second revision) AUG 02 1 11 ** IS 3832:1986 Hand operated chain pulley blocks (second revision) MAR 00 1 12 IS 3938:1983 Electric wire rope hoists (second revision) JAN 03 13 ** IS 4137:1985 Code of practice for heavy duty electric overhead travelling cranes MAR 00 including special service machines for use in steel work (first revision) 14 IS 4164:1976 Lifting 'C' hooks with eye capacity upto 25 tonnes (first revision) MAR 00 15 IS 4178:1967 Eyenuts with collars MAR 00 16 ** IS 4190:1984 Eyebolts with collars (first revision) MAR 00 17 IS 4531(PT 1):1988 Swivels: Part 1 General requirements (first revision) JAN 99 18 IS 4531(PT 2):1988 Swivels: Part 2 Dimensions of bow piece (first revision) JAN 99 19 IS 4531(PT 3):1988 Swivels: Part 3 Dimensions of eye (first revision) JAN 99 20 IS 4573:1982 Power driven mobile cranes (first revision) MAR 00 1 21 IS 4594:1968 Code of practice for design of portal and semiportal wharf cranes MAR 00 (electrical) 22 IS 5604:1984 Hand operated universal gearless pulling and lifting machines (first MAR 00 revision)


25

23 IS 5616:1982 Short link chain for lifting purposes general conditions of acceptance JAN 03 first revision) 24 IS 5749:1970 Forged ramshorn hooks JAN 03 1 25 IS 6132(PT 1):1971 Shackles, Part 1 General requirements MAR 00 26 IS 6132(PT 2):1972 Shackles, Part 2 Dimensions of dee shackles MAR 00 1 27 IS 6132(PT 3):1972 Shackles, Part 3 Dimensions of bow shackles MAR 00 28 IS 6215:1982 Shork link chain, Grade T (8) non-calibrated for lifting purposes (first JAN 03 revision) 29 IS 6216:1982 Short link chain, Grade T (8) calibrated for pulley block and other JAN 03 lifting appliances (first revision) 30 IS 6217:1982 Short link chain, Grade S (6) non-calibrated for lifting purposes (first JAN 03 revision) 31 *IS 6294:1971 Point hooks with shank (for capacities 63 tonnes to 100 tonnes) MAR 00 32 IS 6296:1983 Short link chain, Grade S (6) calibrated for pulley blocks and other JAN 03 lifting appliances (first revision) 33 IS 6498:1971 Glossary of terms used in connection with pulley blocks MAR 00 34 IS 6511:1997 Range of preferred safe working loads for cranes, lifting appliances JAN 03 /IS0 2374:1989 and related excavators equipment 35 IS 6521(PT 1):1972 Code of practice for design of tower cranes:Part 1 Static and MAR 00 rail mounted

36 IS 6547:1972 Electric chain hoists MAR 00 1 37 IS 6549:1972 Glossary of terms used in connection with lifting tackle MAR 00 38 IS 7847:1975 General characteristics of lifting hooks MAR 00 39 IS 7865:1975 General requirements of 8 tonnes hooks for lifting ISO series 1 freight MAR 00 containers of upto 30 tonnes capacity 40 IS 8324:1988 Code of practice for safe use and maintenance of non-calibrated JAN 99 round steel lifting chains and chain slings (first revision) 41 IS 8686(PT 1):1995 Cranes - Design principles for loads and load combinations - Part 1 MAR 00 /ISO 8686-1:1989 General 42 IS 8686(PT 5):1995 Cranes - Design principles for loads and load combinations - Part 5 MAR 00 /ISO 8686-5:1992 Overhead travelling and portal bridge cranes 43 IS 9373:1995 Cranes and related equipment - Accurcy requirement for measuring MAR 00 /ISO 9373:1989 parameters during testing 44 IS 9507:1979 Specification for general purpose electric power driven winches MAR 00 for lifing and hauling 45 IS 10131:1992 Round steel link chain (electric butt welded) for bucket - elevators JAN 03 (first revision) 46 IS 11340:1985 Ratchet lever hoists MAR 00 47 IS 13058:1991 Calibrated round steel link lifting chains - Guidelines for proper MAR 00 /ISO 7592:1983 use and maintenance 48 IS 13156:1991 Sheave pulley blocks for wire rope_- Specifications MAR 00 49 IS 13308:1992 Lifting appliances - Sheaves - Technical supply conditions JAN 03

26

50 IS 13367(PT 1):1992 Safe use of cranes - Code of practice Part 1 General JAN 03 51 IS 13473(PT 1):1992 Cranes - Vocabulary Part 1 General JAN 03 /ISO 4306-1:1990 52 IS 13473(PT 2):1992 Cranes - Vocabulary Part 2 Mobile cranes JAN 03 /ISO 4306-2:1985 53 IS 13473(PT 3):1993 Cranes - Vocabulary, Part 3 Tower cranes JAN 03 /ISO 4306-3:1991 54 IS 13558(PT 1):1992 Cranes - Controls - Layout and characteristics:Part 1 General MAR 00 /ISO 7752-1:1989 principles 55 IS 13558(PT 2):1995 Cranes - Controls - Lyout and Characteristics - Prt 2 Mobile Cranes MAR 00 /ISO 7752-2:1985 56 IS 13558(PT 3):1995 Cranes - Control - Layout and characteristics - Part 3 Tower cranes MAR 00 /ISO 7752-3:1993 57 IS 13558(PT 4):1993 Cranes - Controls - Layout and characteristics: Part 4 Jib cranes JAN 03 /ISO 7752-4:1989 58 IS 13558(PT 5):1993 Cranes - Controls - Layout and characteristics: Part 5 Overhead JAN 03 /ISO 7752-5:1985 travelling cranes and postal bridge cranes 59 IS 13559(PT 1):1993 Cranes - Information to be provided, Part 1 General JAN 03 /ISO 9374-1:1989 60 IS 13559(PT 4):1992 Cranes - Information to be provided Part 4 Jib cranes JAN 03 /ISO 9374-4:1989 61 IS 13572(PT 1):1992 Cranes - Crane driving manual: Part 1 General JAN 03 /ISO 9928-1:1990 62 IS 13583(PT 1):1993 Cranes - Training of drivers: Part 1 General JAN 03 /ISO 9926-1:1990 63 IS 13834(PT 1):1994 Cranes - Classification Part 1 General JAN 03 /ISO 4301-1:1986 64 IS 13834(PT 2):1993 Cranes - Classification: Part 2 Mobile cranes JAN 03 /ISO 4301-2:1985 65 IS 13834(PT 3):1995 Cranes - Classification Part 3 Tower Cranes MAR 00 /ISO 4301-3:1993 66 IS 13834(PT 4):1993 Cranes - Classification: Part 4 Jib cranes JAN 03 /ISO 4301-4:1989 67 IS 13834(PT 5):1993 Cranes - Classification: Part 5 Overhead travelling and portal JAN 03 /ISO 4301-5:1991 bridge cranes 68 IS 14467:1997 Cranes - Wind load assessment JAN 03 /ISO 4302:1981 69 IS 14468:1997 Cranes other than mobile and floating cranes - General requirements JAN 03 /ISO 4304:1987 for stability 70 IS 14469:1997 Mobile cranes - Determination of stability JAN 03 /ISO 4305:1991 71 IS 14470:1997 Cranes - Test code and procedures JAN 03 /ISO 4310:1981 72 IS 14471:1997 Cranes and lifting appliances - Technical characteristics and JAN 03 /ISO 7368:1986 acceptance documents

27

73 IS 14472(PT 5):1997 Cranes - Information to be provided Part 5 Overhead travelling JAN 03 /ISO 9374-5:1991 cranes and portal bridge cranes 74 IS 14473(PT 1):1997 Cranes - Inspections Part 1 General JAN 03 /ISO 9927-1:1994 75 IS 14474(PT 1):1997 Mobile cranes - Experimental determination of crane performance JAN 03 /ISO 11662-1:1995 Part 1 Tipping loads and radii 76 IS 14475(PT 1):1997 Cranes - Condition monitoring Part 1 General JAN 03 /ISO 12482-1:1995 77 IS 15192:2002 Forged steel components for use with grade T(8) chain and chain sling - OCT 02 Specification

DRAFT STANDARDS FINALIZED AND NOT YET UNDER PRINT DOC:MED 14(616) Code of practice for jib cranes DOC:MED 14(569) Forged shackles for general lifting purposes – Dee shackles and Bow shackles (merging IS 6132 Pt 1, Pt-2 and Pt 3) (Adoption of ISO 2415-1987)

DRAFT STANDARD COMPLETED WIDE CIRCULATION DOC:MED 14(422) Code of practice for design, manufacture, erection and testing (structural portion) of cranes and hoists (first revision of

28

ME 16 GAS CYLINDERS SECTIONAL COMMITTEE

Scope - a) Formulation of standards on gas cylinders for permanent, high pressure liquefiable low pressure liquefiable and dissolved gases; fittings of gas cylinder, namely valve fittings, pressure regulators; pipelines conveying gases; identification colours of gas cylinders; acetylene generators; filling ratios and developed pressures for different gases. b) Co-ordination of work with ISO/TC 58 Gas Cylinders. c) Co-ordination of work with ISO/TC 185 Safety for protection against excessive pressures


STANDARDS PUBLISHED 1 IS 3196(PT 1):1992 Welded low carbon steel gas cylinder exceeding 5 litre water capacity SEP 01 3 for low pressure liquefiable gases Part 1 Cylinders for liquefied petroleum gas (LPG)(fourth revision) 2 IS 3196(PT 2):1992 Welded low carbon steel gas cylinder exceeding 5 litre water SEP 01 3 capacity for low pressure liquefiable gases Part 2 Cylinders for

liquefiable gases other than LPG (fourth revision) 3 IS 3196(PT 3):1991 Welded low carbon steel gas cylinder exceeding 5 litre water capacity MAR 01 1 for low pressure liquefiable gases Part 3 Methods of test (fourth revision) 4 IS 3196(Pt 4):2001 Welded low carbon steel cylinders exceeding 5 litre water capacity for NOV 01 1 low pressure liquefiable gases - Specification Part 4 Cylinders for toxic and corrosive gases (Amalgamation of IS 7680, 7681 and 7682) 5 IS 3224:2002 Valve fittings for compressed gas cylinders excluding liquefied JUL 02 petroleum gas (LPG) cylinders (third revision) 6 IS 3710:1978 Filling ratios for low pressure liquefiable gas (first revision) JUL 00 1 7 IS 3745:1978 Yoke type valve connections for small medical gas cylinders (first JUL 00 3 revision) 8 IS 3933:1966 Colour identification of gas cylinders and related equipment JUL 00 intended for medical use 9 IS 4093:1981 Non-refillable liquefied petroleum gas containers (second revision) AUG 02 10 IS 4152:1989 Carbon di-oxide cylinders for fire fighting purposes on boardship JUL 00 (second revision) 11 IS 4379:1981 Identification of contents of industrial gas cylinders (first revision) AUG 02 1 12 IS 4784:1968 Low pressure regulators for use with butane gases AUG 02 2 13 IS 4785:1968 Low pressure regulators for use with propane gas AUG 02 1 14 IS 4786:1968 Variable high pressure regulators for use with liquefied petroleum gas MAR 01 2 15 IS 5844:1970 Recommendations for hydrostatic stretch testing of compressed JUL 00 gas cylinders 16 IS 5845:1993 Code of practice for inspection of low pressure welded steel gas AUG 02 cylinders other than LPG cylinders in use (second revision) 17 IS 5903:1970 Recommendations for safety devices for gas cylinders JUL 00

� INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

29

18 IS 7142:1995 Welded low carbon steel cylinders for low pressure liquifiable gases JUL 00 not exceeding 5 litre water capacity - Specificatiom (first revision) 19 IS 7202:1974 Inspection gauges for checking threads of gas cylinder valves AUG 02 for use with breathing apparatus 20 IS 7241:1981 Glossary of terms used in gas cylinder technology (first revision) AUG 02 21 **IS 7285:1988 Seamless steel cylinders for permanent, dissolved and lliquefiable AUG 02 5 gases (second revision) 22 IS 7302:1974 Valve fittings for gas cylinder valves for use with breathing apparatus JUL 00 23 IS 7312:1993 Welded and seamless steel dissolved acetylene gas cylinders - AUG 02 2 Specification (second revision) 24 * IS 8198(PT 1):1984 Code of practice for steel cylinders for compressed gases Part 1 JUL 00 Atmospheric gases (first revision) 25 *IS 8198(PT 2):1984 Code of practice for steel cylinders for compressed gases Part 2 JUL 00 Hydrogen gas (first revision) 26 *IS 8198(PT 3):1984 Code of practice for steel cylinders for compressed gases Part 3 High JUL 00 pressure liquefiable gases (first revision) 27 *IS 8198(PT 4):1984 Code of practice for steel cylinders for compressed gases:Part 4 JUL 00 Dissolved acetylene gas (first revision) 28 **IS 8198(PT 5):1984 Code of practice for steel cylinders for compressed gases Part 5 JUL 00

Liquefied petroleum gas (LPG) (first revision) 29 ** IS 8198(PT 6):1988 Code of practice for steel cylinders for compressed gases Part 6 AUG 02 Liquefied chlorine gas (first revision) 30 ** IS 8198(PT 7):1988 Code of practice for steel cylinders for compressed gases Part 7 AUG 02 Ammonia gas (first revision) 31 **IS 8198(PT 8):1993 Code of practice for steel cylinders for compressed gases Part 8 AUG 02 Common rganic refrigerant gases (first revision) 32 ** IS 8198(PT 9):1988 Code of practice for steel cylinders for compressed gases Part 9 AUG 02 Sulphur dioxide gas (first revision) 33 ** IS 8198(PT 10):1988 Code of practice for steel cylinders for compressed gases Part 10 AUG 02 Methyl bromide gas (first revision) 34 ** IS 8198(PT 11):1988 Code of practice for steel cylinders for compressed gases Part 11 AUG 02 Methyl chloride gas (first revision) 35 **IS 8198(PT 12):1982 Code of practice for steel cylinders for compressed gases Part 12 MAR 01 Gases for medical use 36 IS 8433:1984 Code of practice for visual inspection of dissolved acetylene gas MAR 01 cylinders (first revision) 37 IS 8451:1984 Code of practice for visual inspection of high pressure gas cylinders JUL 00 (first revision) 38 IS 8452:1977 Glossary of terms used in acetylene generators AUG 02 39 * IS 8471(PT 1):1977 Requirements for acetylene generators Part 1 Low pressure, AUG 02 1 stationary, of water to-carbide and carbide to water type 40 * IS 8471(PT 2):1977 Requirements for acetylene generators Part 2 Low pressure, AUG 02 1 portable, of water-to-carbide type

30

41 * IS 8471(PT 3):1977 Requirements for acetylene generators Part 3 Low pressure, AUG 02 portable, of carbide-to-water type 42 *IS 8471(PT 4):1977 Requirements for acetylene generators Part 4 Medium pressure, AUG 02 2 stationary, of water-to-carbide and carbide-to-water type 43 * IS 8471(PT 5):1977 Requirements for acetylene generators Part 5 Medium pressure, AUG 02 portable, of water-to-carbide and carbide-to-water type 44 IS 8737:1995 Valve fittings for use with liquefied petroleum gas (LPG) cylinders of JUL 00 1 more than 5 litre water capacity - Specification (first revision) 45 IS 8775:1978 illing pressure and corresponding developed pressure for permanent AUG 02 gases contained in gas cylinders 46 IS 8776:1988 Valve fittings for use with liquefied petroleum gas (LPG) cylinder up to AUG 02 1 and including 5 litre water capacity (first revision) 47 IS 8866:1978 Filling ratios and corresponding developed pressure for high pressure AUG 02 liquefiable gases contained in gas cylinder 48 IS 8867:1978 Saturated vapour pressure and test pressure for low pressure l AUG 02 iquefiable gases contained in gas cylinders 49 IS 8868:1988 Periodical inspection interval of gas cylinders in use (first revision) AUG 02 50 ** IS 9121:1979 Inspection gauges for checking type 1 (size 2) taper threads of gas JUL 00 1 cylinder valves, taper 1 in 16 51 IS 9122:1979 Inspection gauges for checking type 2 taper threads of gas cylinder JUL 00 valves, taper 3 in 25 52 IS 9199:1979 Inspection gauges for checking taper threads of gas cylinder valves, JUL 00 type 3, taper 60 degree include angle 53 IS 9200:1988 Method of disposals of unserviceable compressed gas cylinders (first AUG 02 revision) 54 IS 9639:1980 Code of practice for visual inspection of low pressure welded steel MAR 01 1 gas cylinders during manufacture 55 IS 9687:1980 Inspection gauges for checking type 1 (size 1) taper threads of gas MAR 01 cylinder valves taper 1 in 16 56 IS 9798:1995 Low pressure regulators for use with liquefied petroleum gas (LPG) - JUL 00 3 Specification (first revision) 57 IS 11006:1984 Flash back arrestor (flame arrestor) MAR 01 1 58 IS 12300:1988 Valve fittings for small freon cylinders AUG 02 1 59 IS 12586:1988 Brazed low carbon steel gas cylinders not exceeding 13 litre water AUG 02 3 capacity 60 IS 12936:1990 Code for basic requirements for delivery persons engaged in the JUL 00 1 delivery of LPG cylinders 61 IS 13258:1991 welded low carbon steel cylinders exceeding 5 litre water capacity MAR 01 for low pressure liquefiable gas - Code of practice for inspection and econditioning of used LPG cylinders 62 IS 13497:1992 Fusible plug for dissolved acetylene gas cylinder - Specification SEP 99 63 SP:9:1973 Technical data sheet for gases conveyed in cylinders MAR 01 1 64 IS 14899:2000 Liquefied petroleum gas (LPG) containers for automotive use - DEC 00 2 Specification

31

65 IS 15100:2001 Multi function valve assembly for permanently fixed LPG containers for DEC 01 1 Automotive use

66 IS 15190 (Pt 1):2002 Acetylene pipelines - Code of practice Part 1 For pressures from AUG 02 155kPa to 2550 kPa 67 IS 15190(Pt 2):2002 Acetylene pipelines - Code of practice Part 2 For pressures upto 155 kPa SEP 02

FINALIZED DRAFT UNDER PRINT DOC:MED 16(0570) Acetylene Generator (Amalgamation of IS 8471 Part I to 5) DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC:MED 16(0568) High pressure seamless steel cylinders for the on-board storage of natural gas as a fuel for vehicles

DOC:MED 16(0689) Gas cylinders – Refillable seamless gas cylinders – Design, construction and Testing: Part 1 Normalized steel cylinder (third revision of IS 7285) DOC:MED 16(0690) Gas cylinders – Refillable seamless gas cylinders – Design, construction and Testing: Part 2 Quenched and tempered steel cylinder (third revision of IS 7285) DOC:MED 16(0691) Code of practice for steel cylinders for compressed gases [amalgamation of IS 8198 (Part 1 to 4)]

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION DOC:MED 16(682) Inspection gauges for checking type 1 (size 2) taper threads of gas cylinder valves, taper 1 in 16 (first revision of IS 9121)

32

ME 17 CHEMICAL ENGINEERING PLANTS AND RELATED EQUIPMENT SECTIONAL COMMITTEE

Scope - a) Formulation of standards for equipment including_industrial valves used in chemical industry.

b) co-ordination of work with ISO/TC 67 Material , equipment and offshore structures for petroleum and natural gas industries, ISO/TC 112 Vacuum technology, ISO/TC 116 Space heating appliances and ISO/TC 153 Valves, SL NO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS. STANDARDS PUBLISHED 1 IS 2379:1990 Colour code for identification of pipe lines (first revision) SEP 00 2 IS 2843:1964 Recommendation on nominal capacities for process equipment SEP 00 3 IS 2844:1964 Recommendation on nominal diameter for process equipment SEP 00 4 IS 3030:1965 Recommendation for letter symbols, signs and abbreviations used in SEP 00 chemical engineering 5 IS 3132:1965 Recommendations for shaft diameter for chemical equipment JAN 03 6 IS 3133:1989 Manhole and inspection openings for chemical equipment - General AUG 99 requirements (first revision) 7 IS 3232:1999 Recommendations on graphical symbols for process flow diagrams DEC 99

(first revision) 8 IS 3233:1965 Glossary of terms for safety and relief valves and their parts JAN 03 9 IS 3612:1994 Crushing and grinding equipment - Classification and methods AUG 99 for measuring capacity (first revision) 10 IS 4049(PT 1):1988 Formed ends for tanks and pressure vessels Part 1 Based on outside MAR 99 1 diameter basis (second revision) 11 IS 4049(PT 2):1996 Formed ends for tanks and pressure vessels - Specification Part 2 SEP 01 Based on inside diameter basis (first revision) 12 IS 4092(PT 1):1992 Centrifuges of the basket and bowl and vibrating type for use in JAN 03 industrial and commercial application Part 1 General requirements

(second evision) 13 IS 4110:1967 Glossary of terms used in high vacuum technology MAR 99 14 IS 4179:1967 Sizes of process vessels and leading dimensions MAR 99 15 IS 4254:1994 Jaw crushers - General requirements (first revision) MAR 99 1 16 IS 4255:1967 Gyratory and cone crushers SEP 00 17 IS 4503:1967 Shell and tube type heat exchangers JAN 03 3 18 IS 4642:1968 Ball pebble and tube mills SEP 00 19 IS 4682(PT 1):1994 Code of practice for lining of vessels and equipment for chemical MAR 99 1 processes Part 1 Rubber lining (first revision)


33

20 IS 4682(PT 2):1969 Code of practice for lining of vessels and equipment for chemical SEP 00 1 processes Part 2 Glass enamel lining 21 IS 4682(PT 3):1969 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 3 Lead lining 22 IS 4682(PT 4):1998 Code of practice for lining of vessels and equipment for chemical SEP 98 processes Part 4 Plasticised PVC lining 23 IS 4682(PT 5):1970 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 5 Epoxide resin lining 24 IS 4682(PT 6):1970 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 6 Phenolic resin lining 25 IS 4682(PT 7):1974 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 7 Corrosion and heat resistant metals 26 IS 4682(PT 8):1974 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 8 Precious metal 27 IS 4682(PT 9):1974 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 9 Titanium 28 IS 4682(PT 10):1974 Code of practice for lining of vessels and equipment for chemical SEP 00 processes Part 10 Brick and tile 29 IS 4854(PT 1):1969 Glossary of terms for valves and their parts: Part 1 Screw down stop AUG 99 check and gate valve and their parts 30 IS 4854(PT 2):1969 Glossary of terms for valves and their parts: Part 2 Plug valves and AUG 99 cocks and their parts 31 IS 4854(PT 3):1974 Glossary of terms for valves and their parts: Part 3 Butterfly valves AUG 99 32 IS 4864:1968 Shell flanges for vessels and equipment: General requirements SEP 00 33 IS 4865:1968 Welded shell flanges for non-pressure service SEP 00 34 IS 4866:1968 Welded shell flanges for carbon steel pressure vessels and SEP 00 equipment 35 IS 4867:1968 Welded neck shell flanges for carbon steel pressure vessels SEP 00

and equipment 36 IS 4868:1968 Welded shell flanges for stainless steel pressure vessels and SEP 00 equipment 37 IS 4869:1968 Welded shell flanges with hub for stainless steel pressure vessels and SEP 00 equipment 38 IS 4870:1968 Flat gaskets for shell flanges SEP 00 39 IS 5036:1969 Filter presses recessed plate type and plate and frame type SEP 00 40 IS 5428(PT 1):1985 Gauge glasses:Part 1 Tubular glasses for level gauges (first revision) SEP 00 41 IS 5428(PT 2):1985 Gauge glasses: Part 2 Protector glasses for tubular gauge glasses SEP 00 (first revision) 42 IS 5428(PT 3):1985 Gauge glasses:Part 3 Through vision and reflex glasses (first revision) SEP 00 43 IS 5428(PT 4):1985 Gauge glasses:Part 4 Circular sight and light glasses (first revision) SEP 00 44 IS 5428(PT 5):1985 Part 5 Port gauge glasses as used in fittings for steam boilers (first SEP 00 revision) 45 IS 5675:1987 Rotary-disk vacuum filters (first revision) JAN 03

34

46 IS 6034:1989 Insulating oil conditioning plants - Specification (first revision) AUG 99 47 IS 6076:1990 Vacuum technology - Flange dimensions (first revision) SEP 00 /ISO 1609:1986 48 IS 6088:1988 Oil-to-water heat exchangers for transformers (first revision) MAR 99 49 IS 6157:1981 Valve inspection and test (first revision) JAN 03 50 IS 6202:1971 Flat glass oil level gauges for oil storage tanks AUG 99 51 IS 6838:1973 Dimensions for `O' rings and grooves for vacuum flanges AUG 99 52 IS 6849(PT 1):1999 Positive-displacement vacuum pumps - Measurement of the JUN 99 /ISO 1607-1:1993 performance characteristics Part 1 Measurement of the volume rate of flow (pumping speed) (second revision) 53 IS 6849(PT 2):1993 Positive displacement vacuum pumps - Measurement of JAN 03 /ISO 1607-2:1989 performance characterstics Part 2 Measurement of ultimate

pressure (first revision) 54 IS 6849(PT 3):1976 Methods of measurement of the performance characteristics of JAN 03 positive-displacement vacuum pumps Part 3 Water vapour

pumping capacity 55 IS 7366:1974 Edge type filters required for filtration of oils of straight mineral type SEP 00 56 IS 8243(PT 1):1999 Vapour vacuum pumps - Measurement of performance JUN 99 /ISO 1608/1:1993 characteristics:Part 1 Measurement of volume rate of flow

(pumping speed) (second revision) 57 IS 8243(PT 2):1993 Vapour vacuum pumps - Methods of measurement of MAR 99 /ISO 1608-2:1989 performance characteristics Part 2 Measurement of critical backing

pressure (first revision) 58 IS 8244:1976 Methods of calibration of vacuum gauges by direct comparison JAN 03 with reference gauge 59 IS 8245:1976 Graphical symbols for vacuum technology JAN 03 60 IS 8262(PT 1):1976 Quick release couplings for vacuum pipe lines Part 1 Screwed type JAN 03 |ISO 2861-2:1980 61 IS 8262(PT 2):1976 Quick release couplings for vacuum pipe lines Part 2 Clamped JAN 03 |ISO 2861-1:1974 type 62 IS 8276(PT 1):1976 Methods for calibration of vacuum gauges:Part 1 Pressure reduction JAN 03 by continuous flow in the pressure range of 10-1 to 1-5 Pa 63 IS 8280:1976 Methods of calibration of ionization vacuum gauges JAN 03 64 IS 8288:1976 Bakeable flanges JAN 03 |ISO 3669:1986 65 IS 8576:1977 Purchaser's data sheet for general purpose dryers MAR 99 66 IS 8577:1977 Purchaser's data sheet for rotary vacuum filters MAR 99 67 IS 8578:1977 Purchaser's data sheet for pulverizers MAR 99 68 IS 8579:1977 Purchaser's data sheet for crystallizers MAR 99 69 IS 8580:1977 Supplier's data sheet for vibrating screens MAR 99 70 IS 8581:1977 Supplier's data sheet for cooling towers for process industry MAR 99 71 IS 8582:1977 Supplier's data sheet for basket type centrifuges MAR 99 72 IS 8658:1978 Purchaser's data sheet for vibrating screens SEP 00

35

73 IS 8659:1978 Purchaser's data sheet for basket type centrifuges SEP 00 74 IS 8660:1978 Purchaser's data sheet for vibrating vibrators for use with bin SEP 00

and hopper 75 IS 8667:1977 Purchaser's data sheet for cooling towers for process industry MAR 99 76 IS 9082:1979 Purchaser's data sheet for bursting discs and assemblies SEP 00 77 IS 9083:1979 Purchaser's data sheet for rubber lined tanks SEP 00 78 IS 9084:1979 Recommendation for nominal capacities for fluid storage SEP 00 spherical tanks 79 IS 9151:1979 Glossary of terms for process equipment SEP 00 80 IS 9240:1979 Purchaser's data sheet for gas scrubber cooler or absorber SEP 00 81 IS 9241:1979 Purchaser's data sheet for electrostatic precipitators SEP 00 82 IS 9254:1979 Supplier's data sheet for electrostatic percipitators SEP 00 83 IS 9260:1979 Supplier's data sheet for crystallizer SEP 00 84 IS 9289:1979 Purchaser's data sheet for agitators SEP 00 85 IS 9309:1979 Roller crusher SEP 00 86 IS 9446:1980 Graphical symbols for pipelines and instrumentation diagrams SEP 01 87 IS 9520:1980 Nominal sizes for valves SEP 00 3 88 IS 9522:1980 Code of practice for agitator equipment SEP 00 89 IS 9539:1980 Purchaser's data sheet for solid bowl scroll discharge centrifuges SEP 00 90 IS 9540:1980 Purchaser's data sheet for plate and frame filters SEP 00 91 IS 9578:1980 Purchaser's data sheet for liquid/solid separation centrifuges SEP 00 92 IS 9579:1980 Supplier's data sheet for hammer mills SEP 00 93 IS 9580:1980 Purchaser's data sheet for hammer mills SEP 00 94 IS 9602:1980 Supplier's data sheet for agitators SEP 00 95 IS 9618:1980 Road tankers for liquefied petroleum gas SEP 00 96 IS 9625:1980 Locations of by-pass and drain connections for valves SEP 00 1 97 IS 9693:1980 Purchaser's data sheet for spray dryers SEP 00 98 IS 9705(PT 1):1980 Quick release couplings for vacuum pipe lines Part 1: Screwed SEP 00 couplings type `B' 99 IS 9866:1981 Marking system for valves JAN 03 100 IS 9884:1981 Dimensions for ferrous valves - face to face and end to end JAN 03 101 IS 9890:1981 General purpose ball valves JAN 03 102 IS 10092:1982 Glossary of terms (and materials of construction) for rotary MAR 99 equipment 103 IS 10120:1982 Supplier's data sheet for rotary dryers MAR 99 104 IS 10123:1982 Data sheet for shell and tube type heat exchangers MAR 99 105 IS 10217:1982 Method of determination of crushability index SEP 00

36

106 IS 10218:1982 Method of determination of grindability index SEP 00 107 IS 10219:1982 Purchaser's data sheet for tube nest evaporation plants MAR 99 108 IS 10247:1982 Method of determination of impact index SEP 00 109 IS 10409:1983 Purchaser's data sheet for rotary type dryer MAR 99 110 IS 10444:1983 Hammer mills SEP 00 111 IS 10459:1983 General purpose plug valves MAR 99 112 IS 10470:1983 Air cooled heat exchangers SEP 00 1 113 IS 10605:1989 Steel globe valves (flanged and butt welded ends) for petroleum, AUG 99 petrochemical and allied industries - Specification (first revision) 114 IS 10611:1983 Steel gate valves (flanged and butt welded ends) for petroleum, SEP 00 1 petrochemicals and allied industries 115 IS 10661:1983 Glass fibre reinforced polyester chemical resistant tanks MAR 99 116 IS 10688:1983 Method for proving gas tightness of vacuum plant MAR 99 117 IS 10732:1983 Purchaser's data sheet for gauge glasses for pressure vessels MAR 99 118 IS 10843:1984 Glossary of terms for crushers SEP 00 119 IS 10873:1983 Data sheet for air-cooled heat exchangers MAR 99 120 IS 10874:1983 Felsite grinding media and liner stones SEP 00 121 IS 10875:1983 Glossary of terms and material of construction for rotary dryers MAR 99 and coolers 122 IS 10919:1984 Glossary of terms for electrostatic precipitaters MAR 99 123 IS 10989:1984 Cast or forged steel check valves (flanged or butt-welding ends) AUG 99 1 for petroleum, per trochemicals, chemical and allied industries 124 IS 11132:1985 Ammonia valves SEP 00 125 IS 11332:1985 Code of practice for industrial ovens JAN 03 126 IS 11552:1986 Liquid nitrogen vessels of capacity up to 50 litres JAN 03 127 IS 11555(PT 1):1986 Designer's data sheet:Part 1 Mechanical design of columns JAN 03 128 IS 11555(PT 2):1986 Designer's data sheet:Part 2 Column internal JAN 03 129 IS 11556:1986 Purchaser's data sheet for distillation columns JAN 03 130 IS 11564:1986 Supplier's data sheet for fluid bed dryers JAN 03 131 IS 11565:1986 Data sheet for industrial ovens JAN 03 132 IS 11572:1986 Purchaser's data sheet for fluid bed dryers JAN 03 133 IS 11611:1992 Fire test for valves (including soft seated quarter turn valves) - JAN 03 Method of test (first revision) 134 IS 11620:1986 Code of practice for fluid bed-dryer JAN 03 135 IS 11699:1986 Steel plug valves for petroleum, petrochemical and allied JAN 03 industries 136 IS 11733:1986 Specification for steel wedge gate globe and check valves for JAN 03 petroleum, petrochemical and allied industries (nominal size 50 mm

and smaller)

37

137 IS 11790:1986 Code of practice for preparation of butt-welding ends for pipes JAN 03 , valves flanges and fittings 138 IS 11791:1986 Diaphragm type valves for general purposes JAN 03 139 IS 11792:1986 Steel ball valve for the petroleum, petrochemical and allied JAN 03 1

industries 140 IS 12213:1987 Code for mechanical vibrating screens JAN 03 141 IS 12273:1987 Industrial oil fired burners JAN 03 142 IS 12355:1988 Supplier's data sheet for vibrators for use with bin and hopper MAR 99 143 IS 12356:1988 Purchaser's data sheet for clean air equipments (laminar flow) MAR 99 144 IS 12357:1988 Supplier's data sheet for clean air equipments (laminar flow) MAR 99 145 IS 12370:1993 Bursting discs and bursting disc devices (first revision) SEP 01 /ISO 6718:1991 146 IS 12754(PT 1):1989 Process measurement control functions and instrumentation - AUG 99 /ISO 3511-1:1977 Symbolic representation Part 1 Basic requirements 147 IS 12754(PT 2):1989 Process measurement control functions and instrumentation – AUG 99 /ISO 3511-2:1984 Symbolic representation Part 2 Extension of basic requirements 148 IS 12754(PT 3):1989 Process measurement control functions and instrumentation - AUG 99 /ISO 3511-3:1984 Symbolic representation Part 3 Detailed symbols for instrument

interconnection diagrams 149 IS 12754(PT 4):1989 Process measurement control functions and instrumentation - AUG 99 /ISO 3511-4:1985 Symbolic rrepresentation Part 4 Basic symbols for process

computer, interface and shared display 150 IS 12962:1990 Data sheet for basic engineering plant design SEP 00 151 IS 12992(PT 1):1993 Safety relief valves - Spring loaded - Specification Part 1 Design MAR 99 152 IS 12992(PT 2):1990 Spring loaded safety relief valves - Specification Part 2 Testing SEP 00 153 IS 12995:1990 Process/basic engineering/knowhow packages - data sheet SEP 00 154 IS 13095:1991 Butterfly valves for general purposes JAN 03 1 155 IS 13159(PT 1):1993 Pipe flanges and flanged fittings - Specification: Part 1 Dimensions MAR 99 156 IS 13187:1991 Road tankers for light petroleum products - Specification JAN 03 1 157 IS 13306:1992 Oil and gas fired thermic fluid heaters - Method of calculation of JAN 03 film temperatures 158 IS 14404:1996 Process equipment - Recommendations on design pressure and SEP 01

temperature

38

ME 18 CONSTRUCTION PLANT AND MACHINERY SECTIONAL COMMITTEE

Scope - a) Formulation of standards for construction plant and machinery used in the field of civil engineering. b) Co-ordination of work with ISO/TC 195 `Building construction machinery and equipment’.


STANDARDS PUBLISHED 1 IS 1791:1985 General requirements for batch type concrete mixers (second revision) OCT 99

2 IS 2094(Part 1):1996 Heater for bitumen (tar) and emulsion – Specification Part 1 SEP 01 1 Bitumen heaters (second revision) 3 IS 2094(Part 2):1999 Heater for bitumen (tar) and emulsion: Part 2 Bitumen sprayer MAY 99 4 IS 2094(Part 3):1999 Heater for bitumen (tar) and emulsion - Specification FEB 99 1 Part 3 Emulsion (third revision) 5 IS 2438:1963 Specification for roller pan mixer OCT 99 6 IS 2439:1963 Specification for metal hand rollers (fixed weight type) JAN 03 7 IS 2514:1963 Specification for concrete vibrating tables SEP 01 8 IS 3066:1965 Specification for hot asphalt mixing plants SEP 01 1 9 IS 3251:1965 Specification for asphalt paver finishers SEP 01 10 IS 3251(PT 2):1992 Asphalt paver finisher - General requirements Part 2 Hydraulic (first JAN 03 revision) 11 IS 3365:1965 Specification for floor polishing machines OCT 99 1 12 IS 3559:1966 Specification for pneumatic concrete breakers OCT 99 1 13 IS 4183:1967 Specification for metal hand rammers SEP 01 14 IS 4616:1968 Specification for sheepsfoot roller JAN 03 15 IS 4656:1968 Specification for form vibrators for concrete SEP 01 16 *IS 4925:1968 Specification for concrete batching and mixing plant SEP 01 17 IS 5435:1987 General requirements for cold bituminous macadam mixing plants (first JAN 03 revision) 18 IS 5436:1969 Method of testing oil-fired rotary dryers for hot mix asphalt and OCT 99 1 bituminous macadam plants 19 *IS 5500:1977 Specification for vibratory rollers (first revision) OCT 99 1 20 *IS 5500(PT 2):1992 Vibratory roller - General requirements Part 2 Self propelled heavy JAN 03 duty single drum (second revision)


39

21 IS 5501:1969 Specification for pneumatic tyred roller JAN 03 22 IS 5502:1988 General requirements for smooth-wheeled diesel road roller (second JAN 03 revision) 23 IS 5889:1994 Vibratory plate compactor - Specification (first revision) JAN 99 24 * IS 5890:1970 Specification for mobile hot mix asphalt plants, light duty SEP 01 1 25 IS 5891:1970 Specification for hand-operated concrete mixer JAN 03 1 26 IS 5892:1970 Specification for concrete transit mixers and agitators SEP 01 27 IS 6426:1972 Specification for pile driving hammer OCT 99 28 IS 6427:1972 Glossary of terms relating to pile driving equipment OCT 99 29 IS 6428:1972 Specification for pile frame OCT 99 30 IS 6433:1972 Specification for guniting equipment OCT 99 31 IS 7242:1974 Specification for concrete spreaders SEP 01 32 IS 7245:1974 Specification for concrete pavers SEP 01 33 IS 7251:1974 Specification for concrete finishers SEP 01 1 34 IS 11386:1985 Glossary of terms relating to concrete mixers OCT 99 35 IS 12466:1988 General requirements for builder's hoist JAN 03 36 IS 13291:1992 Concrete block making machine - General requirements JAN 03 37 IS 13404:1992 Power trowel - General requirements JAN 03 38 IS 14362:1996 Pile boring equipment - General requirements SEP 01

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT DOC:MED 18(0074) Concrete batching and mixing plant 10-450 m3/h capacity - Specification (first revision of IS 4925) DOC:MED 18(0467) Mobile hot mix asphalt plant, light duty - Requirements (first revision of IS 5890) DOC:MED 18(0533) Vibratory roller – General requirements Part 1 Self propelled tandem drum (second revision of IS 5500) DOC:MED 18(0700) Vibratory roller - General requirements Part 2 Self propelled Single drum [third revision of IS 5500(Part 2)]

40

ME 20 PUMPS SECTIONAL COMMITTEE Scope a) Formulation of standards on components, equipment, methods of tests and code of practices for different type of pumps, excluding handpumps.

b) Co-ordination of work with ISO/TC 115 Pumps. SL NO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS. STANDARDS PUBLISHED 1 IS 1710:1989 Specification for pumps - Vertical turbine mixed and axial flow, for MAR 99 2

clear cold water (second revision)

2 IS 5120:1977 Technical requirements for rotodynamic special purpose pumps (first JUL 01 5 revision)

3 IS 5600:2002 Pumps - Sewage and drainage - Specification SEP 02 4 IS 5639:1970 Pumps handling chemicals and corrosive liquids JUL 01 5 IS 5659:1970 Pumps for process water JUL 01 1 6 IS 6536:1972 Pumps for handling volatile liquids JUL 01 7 IS 6595(PT 1):2002 Horizontal centrifugal pumps for clear, cold water - Specification OCT 02 Part 1 Agricultural and rural water supply purposes (third revision) 8 IS 6595(PT 2):1993 Horizontal centrifugal pumps for clear, cold water: Part 2 General NOV 02 purpose (other than agricultural and rural water supply) - Specification (second revision) 9 IS 6596:1972 Pumps for handling paper stock JUL 01 10 IS 8034:2002 Submersible pumpsets - Specification (second revision) NOV 02 11 IS 8418:1999 Pumps - Centrifugal self priming - Specification (first revision) FEB 99 12 IS 8472:1998 Centrifugal regenerative pump for clear, cold water - AUG 98 1 Specification (first revision) 13 IS 9079:2002 Electric monoset pumps for clear, cold water for agricultural and water DEC 02 supply purposes - Specification (second revision) 14 IS 9137:1978 Code for acceptance tests for centrifugal, mixed flow and axial NOV 02 4 pumps - Class C 15 IS 9201:1987 Pumps for handling slurry (first revision) NOV 02 16 IS 9542:1980 Horizontal centrifugal monoset pumps for clear, cold, fresh water NOV 02 1 17 IS 9694(PT 1):1987 Code of practice for the selection, installation, operation and NOV 02 maintenance of horizontal centrifugal pumps for agricultural applications Part 1 Selection (first revision) 18 IS 9694(PT 2):1980 Code of practice for the selection, installation, operation and JUL 01 1 maintenance of horizontal centrifugal pumps for agricultural application Part 2 Installation 19 IS 9694(PT 3):1980 Code of practice for the selection, installation, operation and JUL 01 maintenance of horizontal centrifugal pumps for agricultural applications Part 3 Operation * INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

41

20 IS 9694(PT 4):1980 Code of practice for the selection, installation, operation and JUL 01 1 maintenance of horizontal centrifugal pumps for agricultural applications Part 4 Maintenance 21 IS 10572:1983 Methods of sampling for pumps JAN 00 1 22 IS 10596(PT 1):1983 Code of practice for selection, installation, operation and NOV 02 maintenance of pumps for industrial applications: Part 1 Selection 23 IS 10596(PT 2):1983 Code of practice for selection, installation, operation and NOV 02 maintenance of pumps for industrial applications: Part 2 Installation 24 IS 10596(PT 3):1983 Code of practice for selection, installation, operation and NOV 02 maintenance of pumps for industrial applications: Part 3 Operation 25 IS 10596(PT 4):1983 Code of practice for selection, installation, operation and NOV 02 maintenance of pumps for industrial applications: Part 4 Maintenance 26 IS 10804:1994 Recommended pumping system for agricultural purposes MAR 99 (second revision) 27 IS 10805:1986 Specification for Foot valves, reflux valves or non-return valves and JUL 01 3 bore valves to be used in suction lines of agricultural pumping systems (first revision) 28 IS 10981:1983 Class of acceptance test for centrifugal, mixed flow and axial NOV 02 pumps - Class B 29 IS 11346:2002 Tests for agricultural and water supply pumps - Code of acceptance DEC 02 30 IS 11382:1986 Dimensions for stuffing box cavities of end-suction process pumps JUL 01 1 31 IS 11501:1986 Engine monoset pumps for clear, cold, water for agricultural UL 01 3 purposes 32 IS 11745:1986 Technical supply conditions for positive displacement pumps - JUL 01 reciprocating 33 IS 12225:1997 Centrifugal jet pump - Specification (first revision) NOV 02 2 34 IS 12469:1988 Pumps for fire fighting system NOV 02 1 35 IS 12699:1989 Selection, installation, operation and maintenance of centrifugal MAR 99 1 jet pump - Code of practice 36 IS 13139:1992 End suction centrifugal pumps - Base plate and installation - NOV 02 /ISO 3661:1977 Dimensions 37 IS 13518:1992 End suction centrifugal pumps (rating 16 bar) - Designation, NOV 02 /ISO 2858:1975 nominal duty point and dimensions 38 IS 13537:1993 Technical specification for centrifugal pumps - Class 2 NOV 02 /ISO 5199:1986 39 IS 13538:1993 Centrifugal , mixed flow and axial pumps - Code for hydraulic NOV 02 /ISO 5198:1987 performance tests - Precision class 40 IS 14220:1994 Openwell submersible pumpsets - Specification MAR 99 5 41 IS 14263:1995 Tapers for agricultural pumping systems – Specification AUG 99 1 42 IS 14536:1998 Selection, installation, operation and maintenance of submersible APR 98 pump set - Code of practice DRAFT STANDARD COMPLETED WIDE CIRCULATION DOC:MED 20(0687) Rotodynamic pumps - Hydraulic performance acceptance tests – Grades 1 and 2

42

ME 21 DIAMOND CORE AND WATERWELL DRILLING SECTIONAL COMMITTEE Scope - a) Formulation of standards for diamond core drilling equipment and water well drilling rigs including their accessories. It also includes codes of practice for drilling and boring operations.

b) Co-ordination of work with ISO/TC 82 Mining Through, ISO/TC 82/SC 5 - Rock drilling and SC 6 Diamond core drilling equipment.

SL.NO IS.NO./DOC.NO. TITLE REAFFIRM NO.OF PRINTED AMDTS. STANDARDS PUBLISHED 1 **IS 2800(PT 1):1991 Code of practice for tube well Part 1 Construction (second revision) OCT 01 2 IS 2800(PT 2):1979 Code of practice for tube well Part 2 Testing (first revision) JAN 99 1 3 IS 4097:1967 Gravel for use as pack in tube wells JAN 99 1 4 IS 7156:1974 General requirements for reverse circulation drilling rigs OCT 01 1 5 IS 7206(PT 1):1986 General requirements for direct circulation rotary drilling rigs: Part 1 OCT 01 1 With rotary table (first revision) 6 IS 7209:1974 General requirements for blast hole drilling rigs OCT 01 |ISO 722: 1991 7 IS 8110:2000 Well screens and slotted pipes – Specification (second revision) OCT 00 8 IS 8986:1994 Percussive drilling - Drilling steels in bar form - Dimensions (first JAN 99 |ISO 722:1991 revision) 9 * IS 9026:1978 Rope threaded percussive long hole drilling equipment SEP 99 |ISO 1720:1974 10 IS 9439:2002 Glossary of terms used in water well drilling technology AUG 02 11 IS 10208:1982 Diamond core drilling equipment OCT 01 1 |ISO 3551-1:1992 12 IS 11180:1985 Square and hexagonal kellys for direct rotary drilling OCT 01 1 13 IS 11189:1985 Methods for tubewell development JAN 99 14 **IS 11312(PT 1):1985 External upset drill pipe assemblies for use in water well drilling: OCT 01 1 Part 1 Screwed on joints drill pipe 15 IS 11632:1986 Code of practice of rehabilitation of tube well OCT 01 16 IS 11672:1986 Tungsten carbide buttons and inserts for use in Down-the-hole OCT 01 (DTH) bits 17 * IS 11710:1986 Code of practice for selection and design of diamond core drills SEP 99 18 IS 11830(PT 1):1991 Water well-drilling down-the-hole hammer rigs Part 1 General OCT 01 requirements for hydraulic rigs with or without rotary mode

(first revision)

*INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

43

19 IS 11830(PT 2):1989 Water-well drilling - Down-the-hole hammer rigs: Part 2 General JAN 99 requirements for pneumatic rigs

20 IS 12090:1987 Dimensions of rotary tables for direct rotary drilling equipment OCT 01 21 IS 12097:1994 Classification and selection of drilling rigs for water well drilling JAN 99 (first revision) 22 IS 12214:1987 General requirements for rotary hose for water-well drilling OCT 01 equipment 23 IS 12629:1989 Water well drilling - Rotary hose for rotary drilling - Recommended JAN 99 practice for care and use 24 IS 12635:2000 Water well drilling and blast hole drilling – Rock roller bit with JUL 00 non-sealed ball and roller bearing arrangement - Technical supply conditions (first revision) 25 IS 12682:1989 Water well drilling - Percussion drilling rigs - General requirements JAN 99 26 IS 15028:2001 Hoist swivel for use with diamond core drilling - Specification 27 IS 15029:2001 Recovery taps - Specification 28 IS 15083:2001 Water swivel for use with diamond core drilling - Specification 29 IS 15145:2002 Round kellys for direct rotary water well drilling rigs - Requirements AUG 02

DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC:ME 21(0658) Rope threaded percussive long hole drilling equipment- Specification

(first revision of IS 9026) DOC:ME 21(698) Wire line diamond core drilling equipment (Adoption of ISO 10097-1:1999)

44

ME 22 COMPRESSORS, BLOWERS AND EXHAUSTERS SECTIONAL COMMITTEE

Scope - a) Formulation of standards for compressors, blowers, exhausters and their related accessories. It also covers methods of measuring various quantities connected with the testing and code of practices. b) Preparation of technical supply conditions and acceptance tests for centrifugal, reciprocating, rotary and dynamic compressors, blowers and exhasters.

c) Co-ordination of work with ISO/TC 118 Compressors, Pneumatic Tools and Pneumatic machines.


STANDARDS PUBLISHED 1 IS 5456:1985 Code of practice for testing of positive displacement type air SEP 01 4 compressors and exhausters (first revision) 2 IS 5727:1981 Glossary of terms relating to compressors and exhausters (first revision) SEP 01 |ISO 3857-2:1972 3 IS 6206:1985 Guide for selection, installation and maintenance of air compressors SEP 01 2 up to 10 bars (first revision) 4 IS 6430:1985 Mobile air compressor for construction purposes (first revision) SEP 01 2 5 IS 7938:1976 Air receivers for compressed air installation SEP 01 6 IS 9242:1986 Rated pressure of air compressors (first revision) SEP 01 |ISO 5941:1979 7 IS 10431:1994 Measurement of air flow of compressors and exhausters by nozzles JAN 99 r(first evision) 8 IS 10962:1984 Technical supply conditions for reciprocating air compressor above SEP 01

60 kW 9 IS 11012:1984 Technical supply conditions for reciprocating air compressors above SEP 01 25 kW up to and including 60 kW 10 IS 11119:1984 Technical supply conditions for sliding vane rotary air compressors SEP 01 11 IS 11421:1985 Techniques of pulsation for suppression for reciprocating compressors SEP 01 12 IS 11446:1985 Measurement of airborne noise emitted by compressors units intended SEP 01 |ISO 2151:1972 for outdoor use 13 IS 11461:1985 Code of practice for compressor safety SEP 01 |ISO 5388:1981 14 IS 11465:1985 Technical supply conditions for reciprocating air compressors for power SEP 01 upto 25 kW for general purpose and industrial applications 15 IS 11563:1986 Technical supply conditions for dynamic compressors SEP 01 16 IS 11780:1986 Code for selection and testing of rotary screw air compressors (oil SEP 01 flooded) 17 IS 11891:1986 Lubrication and oil seal system for dynamic compressors SEP 01 * INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

45

18 IS 11989:1986 Compressed air dryers SEP 01 |ISO 7183:1986 19 IS 12258:1987 Technical supply conditions for air screw compressors (oil flooded) for JAN 99 general purpose and industrial applications 20 IS 13124:1993 Reciprocating gas compressors - Technical supply conditions MAR 98 21 IS 14641:1999 Turbo compressor - Performance test code FEB 99 /ISO 5389:1992 22 IS 14642(Pt 1):1999 Compressed air for general use - Part 1 Contaminent and MAR 99 /ISO 8573-1:1996 quality classes 23 IS 14642(PT 2):1999 Compressed air for general use - Part 2 Test methods for aerosol oil MAR 99 /ISO 8573-2:1996

46

ME 23 DOMESTIC AND COMMERCIAL GAS BURNING APPLIANCES (Pressure Type) SECTIONAL COMMITTEE

Scope:- Domestic and commercial gas burning appliances (pressure type) such as gas stoves, oven, cooking ranges and water heaters, including gobar gas stoves

SL NO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS. STANDARDS PUBLISHED 1 IS 4246:2002 Domestic gas stoves for use with liquefied petroleum gases - JUL 02 [EN 30:1979 Specification (fifth revision) 2 IS 4473:2002 Domestic gas ovens for use with liquefied petroleum gases AUG 02 |EN 30:1979 (first revision) 3 IS 4760:2002 Domestic cooking ranges for use with liquefied petroleum gases NOV 02 |EN 30:1979 (third revision) 4 IS 5115:1969 Domestic storage type water heaters for use with LPG OCT 02 5 IS 5116:1996 Domestic and commercial equipment for use with LPG - General 1 AUG 01 2

requirements (third revision) 6 IS 5117:1993 Commercial boiling burners for use with LPG – Specification JAN 99 1

(first revision) 7 IS 5543:1970 Bains marie for use with LPG OCT 02 8 IS 5544:1970 Hot food cabinets for use with LPG OCT 02 9 IS 5776:1988 Bulk water heaters for use with LPG (first revision) JAN 99 10 IS 5777:1970 Fryers for use with LPG OCT 02 11 IS 6480:1988 Glossary of terms relating to domestic and commercial gas-burning JAN 99 appliances 12 IS 7342:1974 Commercial gas baking and roasting oven JAN 99 13 IS 8251:1976 Commercial cooking ranges including grillers for use with LPG AUG 97 14 IS 8749:2002 Bio gas stove (second revision) AUG 02 1 15 IS 11241:1985 Portable liquefied petroleum gas appliances operating at vapour AUG 01 1 pressure 16 IS 11480:1998 Domestic grillers for use with liquefied petroleum gases - Specification AUG 98 (first revision) 17 IS 12011:1987 Code of safety practice for domestic LPG installation OCT 02 18 IS 12012:1992 Gas taps with or without flame failure devise for domestic and OCT 02 commercial as burning appliances - Specification (first revision) 19 IS 13432(PT 1):1992 Gas leak detector for use with low pressure liquefied petroleum gas OCT 02 1 burning appliances - Specification Part 1 Mechanical type 20 IS 13432(PT 2):1998 Gas leak detector for use with low pressure liquefied petroleum gas JUL 98 burning appliances - Specification Part 2 Electronic type 21 IS 14612:1999 Commercial burners using LPG at inlet pressure FEB 99 upto 150 mbar – Specification

• INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS. | INDICATES EQUIVALENT STANDARDS

47

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION DOC: MED 23(0657) Blow torch for cable jointing - Specification DOC:MED 23(0664) Instantaneous gas water heaters - Specification

48

ME 24 SECURITY EQUIPMENT SECTIONAL COMMITTEE

Scope - Formulation of standards for safes; cash boxes; strong room doors and safe deposit locker cabinets, ventilation equipment for banks etc. SL NO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS. STANDARDS PUBLISHED 1 * IS 550(PT 1):1991 Safes: Part 1 Specification (third revision) NOV 99 4 2 ** IS 550(PT 2):1991 Safes, Part 2 Tests for burglary resistance (third revision) SEP 00 1 3 **IS 550(PT 3):1991 Safes, Part 3 Tests for fire resistance (third revision) SEP 00 1 4 IS 1046:1992 Cash boxes - Specifications (third revision) JAN 03 2 5 IS 5244:1991 Safe deposit locker cabinets - Specification (second revision) SEP 00 2 6 IS 7152:1992 Book room doors - Specifications (first revision) JAN 03 2 7 IS 11188(PT 1):1991 Vault (strong room) doors: Part 1 - Specification (first revision) SEP 00 5 8 IS 11188(PT 2):1991 Vault (Strong room) doors: Part 2 Test for burglary resistance SEP 00 1 ( first revision) 9 IS 11188(PT 3):1991 Vault (Strong room) doors: Part 3 Tests for fire resistance ( first SEP 00 revision) 10 IS 12187:1987 Specification for coffers MAR 99 11 IS 14203:1999 Fire resisting record protection cabinet - Specification (first JUL 99 revision) 12 IS 14204:1994 Safes - Non-fire resisting - Specifications NOV 99 13 **IS 14387:1996 Vaults - Air ventilators - Specifications SEP 00 1 14 ** IS 14505:1998 Fire resisting magnetic media protection cabinets - Specification JAN 03 15 IS 14512:1998 Safe cum safe deposit lockers - Specification SEP 98 16 IS 14561:1998 Fire resisting (insulating) filing cabinets - Specification JUL 98 17 IS 14562:1998 Fire resisting computer media protection cabinets - Specification JUL 98

DRAFT STANDARDS/AMENDMENTS UNDER PRINT DOC: MED 24 (504) Code of Practice for Construction of Strong Room Vaults DOC:MED 24(0534) Amendment No. 3 to IS 5244:1991 Safe deposit locker cabinets - Specification (second revision) DOC:MED 24(561) Safes : Part 1 Specification [(fourth revision of IS 550(pt 1)]


49

ME 25 PRINTING MACHINERY SECTIONAL COMMITTEE Scope - Formulation of standards on printing machinery and components covering terminology, dimensions, performance, maintenance and safety requirements. SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF PRINTED AMDTS STANDARDS PUBLISHED 1 IS 10039:1981 Number printing machines, hand operated JAN 03 2 IS 11122(PT 1):1985 Letter press printing plates and equipment Part 1 OCT 01 Original printing plates 3 IS 11122(PT 2):1984 Letter press printing plates and equipment Part 2 OCT 01 flat metal duplicate plates 4 IS 11122(PT 3):1984 Letter press printing plates and equipment Part 3 Galleys OCT 01 5 IS 11122(PT 4):1984 Letter press printing plates and equipment Part 4 Jobbing chases OCT 01 6 IS 11175:1985 Dimensions of metal lithographic plates OCT 01 7 IS 11610:1986 Rubber rollers for offset printing NOV 99 8 IS 12095:1987 Guidelines for metal plates for off-set machines JAN 03 9 IS 12136:1987 Classification of printing machines JAN 03 10 IS 12619:1989 Printing industry - Safety code JAN 03 11 IS 13906:1994 Graphic technology - Sheet fed printing machines - Range of sizes NOV 99 /ISO 3872:1976 12 IS 14637:1999 Printing machinery - Recommendations to be given on indication MAR 99

plates 13 IS 14640(PT 1):1998 Graphic technology – Register system for photographic DEC 98 /ISO 11084-1:1993 materials, foils and paper – Part 1 Three pin systems 14 IS 15141:2002 Graphic technology - Blankets for offset printing JUN 02 /ISO 12636:1998

DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC:MED 25(0683) Graphic technology – Plates for offset printing – Dimensions DOC:MED 25(0684) Graphic technology – Process control – offset plate making DOC:MED 25(0685) Graphic technology – Symbols for text correction DOC:MED 25(0686) Prints – Preparation of standard prints for optical tests


50

ME 26 OIL BURNING APPLIANCES SECTIONAL COMMITTEE Scope - a) All types of oil burning, heating and lighting appliances. b) Co-ordination of work with ISO/TC 109 Oil burners and associated equipment. SLNO IS.NO./DOC.NO. TITLE REAFFIRM / NO.OF

PRINTED AMDTS. STANDARDS PUBLISHED 1 * IS 1238:1985 Hurricane lanterns (fourth revision) AUG 01 1 2 IS 1342:2002 Oil pressure stoves (sixth revision) OCT 02 3 IS 1384:1999 Oil pressure lanterns (third revision) JUL 99 4 IS 1899:1977 Blow lamps (second revision) AUG 01 1 5 IS 2787:1986 Oil pressure heaters (second revision) OCT 02 2 6 IS 2788:1981 Gas mantles (first revision) OCT 02 7 IS 2980:1999 Non-pressure stoves (third revision) SEP 99 8 IS 3164:1980 Oil pressure lamps, hanging type (first revision) OCT 02 9 IS 4957:1968 Mantle holders, nozzle type OCT 02 1 10 IS 8808:1999 Burner for oil pressure stoves and oil pressure heaters (second SEP 99

revision) 11 IS 9557:1980 Wick lamps, non-pressure type OCT 02 12 IS 10109:2002 Oil pressure stoves, offset burner type (first revision) OCT 02 13 IS 11359:1985 Wax candles AUG 01 1 14 IS 11760:1986 Gravity-fed kerosene wick stove AUG 01 15 IS 12202:1987 Glossary of terms relating to oil burning appliances (pressure OCT 02 type and non pressure type

DRAFT S STANDARDS FINALIZED BUT NOT YET UNDER PRINT DOC:MED 26(0652) Kero gas stove - Specification

DRAFT STANDARD APPROVED FOR WIDE CIRCULATION DOC:MED 26(0680) Hurricane lantern – Specification (fifth revision of IS 1238)


51

ME 27 HANDPUMPS SECTIONAL COMMITTEE Scope - Formulation of standards on components, equipment and code of practice for different

types of handpumps and manually operated pumps ISLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS. STANDARDS PUBLISHED 1 IS 8035:1999 Hand pump - Shallow well - Specification APR 99 2 *IS 9301:1990 Deepwell hand pumps - Specification (third revision) JUL 98 6 3 IS 12732:1989 Deepwell handpumps - Nomenclature identification annd JUL 98 1 packaging of components 4 *IS 13056:1991 Deepwell handpumps (VLOM) - Specification MAR 02 6 5 *IS 13287:1992 Extra deepwell handpumps - Specification MAR 02 4 6 *IS 14101:1994 Deepwell handpumps - Components - Cast iron - Specification JUL 98 1 7 *IS 14102:1994 Deepwell handpumps - Components - Leaded tin bronze - JUL 98 1

Specification 8 *IS 14103:1994 Deepwell handpumps - Components - Mild steel - JUL 98 2 Specification 9 *IS 14104:1994 Deepwell handpumps - Components - Nitrile rubber - JUL 98 1

Specification

10 *IS 14105:1994 Deepwell handpumps - Components - Stainless steel - JUL 98 1 Specification 11 IS 14106:1996 Direct action handpump – Specification MAR 02 3 12 *IS 14107:1999 Special tools for deepwell handpump MAY 99

DRAFT STANDARD FINALIZED BUT NOT YET UNDER PRINT DOC:MED 27(487) Deepwell handpumps and components (amalgamation of IS 9301, 13056, 13287, 14101, 14102,

14103, 14104, 14105 and 14107)


52

ME 28 MECHANICAL VIBRATION AND SHOCK Scope - a) Formulation of standards on mechanical vibration and shock including:

i) Terminology ii) Excitation by sources, such as machines, and vibration and shock testing devices;

iii) Elimination, reduction and control, especially by balancing, isolation and damping iv) Measurement and human evaluation of shock and vibration exposure v) Methods and means of measurement and calibration

vi) Methods of testing b) Co-ordination of work with ISO/TC 108, Mechanical vibration and shock

SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS.

STANDARDS PUBLISHED 1 IS 11717:1999 Vocabulary on vibration and shock MAY 00 /ISO 2041:1975 2 IS 11723(PT 1):1992 Balance quality requirements of rigid rotors Part 1 Determination of NOV 02 /ISO 1940-1:1986 permissible residual unbalance (first revision) 3 IS 11726:1985 Requirements for instruments for measuring vibration severity of JAN 02 /ISO 2954:1975 rotating and reciprocating machines 4 IS 11727:1985 Measurement and evaluation of vibration severity in situ of large JAN 02 /ISO 3945:1985 rotating machines with speed range from 10 to 200 rev/s 5 IS 13274:1992 Mechanical vibration - Balancing - Vocabulary NOV 02 /ISO 1925:1990 6 IS 13275:1992 Description and evaluation of field balancing equipment NOV 02 /ISO 2371:1974 7 IS 13276(PT 1):2000 Evaluation of human exposure to whole-body vibration - Part 1 FEB 00 /ISO 2631-1:1997 General requirements 8 IS 13276(PT 2):1992 Evaluation of human exposure to whole-body vibration - Part 2 NOV 02 /ISO 2631-2:1989 Continuous and shock - included vibrations in buildings (1Hz to

50 Hz) 9 IS 13277:1992 Balancing machine - Description and evaluation NOV 02 /ISO 2953:1985 10 IS 13278:1999 Symbols for balancing machines and associated instrumentation NOV 99 /ISO 3719:1982 (first revision)

11 IS 13281:1999 Mechanical vibration and shock affecting man - Vocabulary OCT 99 /ISO 5805:1997 (first revision)

12 IS 14259:1995 Vibration and shock - Isolators - Procedures for specifying JAN 00 /ISO 2017:1982 characteristics 13 IS 14280:1995 Mechanical vibration - Balancing - Shaft and fitment key convention AUG 00 /ISO 8821:1989


53

14 IS/ISO 5344:1980 Electrodynamic test equipment for generating vibration - Methods AUG 00 of describing equipment characteristics 15 IS/ISO 5349:1986 Mechanical vibration - Guidelines for the measurement and the AUG 00 assessment of human exposure to hand - Transmitted vibration 16 IS/ISO 8042:1988 Shock and vibration measurements - Characteristics to be specified AUG 00 for eismic pick-ups 17 IS/ISO 8568:1988 Mechanical shock - Testing machines - Characteristics and AUG 00

performance 18 IS/ISO 8626:1989 Servo-hydraulic test equipment for generating vibration - Method JAN 02 of describing characteristics 19 IS 14728:1999 Code for the measurement and reporting of shipboard vibration SEP 99 /ISO 4867:1984 data 20 IS 14729:1999 Code for the measurement and reporting fo local bivration data SEP 99 /ISO 4868:1984 of ship structures and equipment 21 IS 14730:1999 Vibration and shock - Mechanical driving point impedance of the JAN 00 /ISO 5982:1982 human body 22 IS 14731:1999 Axiliary tables fof vibration generators - Methods of describing SEP 99 /ISO 6070:1981 equipment characteristics 23 IS 14732:1999 Guidelines for the evaluation of the response of occupants of fixed JAN 00 /ISO 6897:1984 structures, especially buildings and off-shore structures, to low-frequency horizontal meotion(0.063 to 1 Hz) 24 IS 14733:1999 Mechanical vibration and shock - Guidelines for the overall OCT 99 /ISO 6954:1984 evaluation of vibration in merchant ships 25 IS 14734:1999 Balancing machines - Enclosures and other safetyy measures SEP 99 /ISO 7475:1984 26 IS 14736(Pt 1):1999 Vibration and shock - Experimental determinatin of mechanical OCT 99 /ISO 7626-1:1986 mobility - Part 1: Basic definitions and transducdrs 27 IS 14736(Pt 2):1999 Vibration and shock - Experimental determination of OCT 99 /ISO 7626-2:1990 mechanical mobility - Part 2: Measurements using single-point

translation excitation with an attached biration exciter. 28 IS 14737:1999 Human response to vibration - Measuring instrumentation. JAN 00 /ISO 8041:1990

29 IS 14773(Pt 1):2000 Mechanical vibration of non-reciprocating machines - APR 00 /ISO 7919-1:1996 Measurements on roating shafts and evaluation Part 1 General delknes (superseding IS/ISO 7919-1:1986) 30 IS 14773(Pt 2):2000 Mechanical vibration of non-reciprocating machines - /ISO 7919-2:1986 Measurement on rotating shafts anc evaluation Part 2: Large land JUL 00

based steam turbin generater sets 31 IS 14773(Pt 3):2000 Mechanical vibration of non-reciprocating machines - Measurement JUL 00 /ISO 7919-3:1986 on rotating shafts and e aluation Part 3 coupled industrial machines 32 IS 14773(Pt 4):2000 Mechanical vibration of non-reciprocating machines - JUL 00 /ISO 7919-4:1986 Meascerment on rotating shafts and evatuation Part 4 Gas

tuabine sets. 33 IS 14773(Pt 5):2001 Mechanical vibration of non reciprocating machines – FEB 01 /ISO 7919-5:1997 Measurements on rotating shafts and evaluation criteria Part 5:

Machine sets in hydraulic power generating and pumping plants 34 IS 14817(Pt 1):2000 Mechanical vibration - Evaluation of machine vibration by JUL 00 /ISO 10816-1:1995 measurements on non rotating parts: Part 1 General guidelines (Superseding IS 11724:1985/ISO 2372:1974)

54

35 IS 14882:2000 Damping materials - Graphical presentation of the complex OCT 00 /ISO 10112:1991 modulus 36 IS 14883:2000 Mechanical vibration and shock – Mechanical mounting of OCT 00 /ISO 5348:1987 accelerometers 37 IS 14884:2000 Mechanical vibration and shock – vibration of buildings – Guidelines OCT 00 /ISO 4866:1990 for the measurement of vibrations and evaluation of their effects on buildings 38 IS 14907:2001 Human/human surrogate impact (single shock) testing and FEB 01 /ISO 10227:1996 evaluation – Guidance on technical aspects 39 IS 14908:2001 Mechanical vibration and shock – Mechanical transmissibility of JAN 01 /ISO 7962:1987 the human body in the Z direction 40 IS 14910:2001 Mechanical vibration and shock – Human exposure – Bio-dynamic FEB 01 /ISO 8727:1997 Coordinate system 41 IS 14916:2001 Mechanical vibration and shock – Free mechanical impedence JAN 01 /ISO 10068:1998 ofthe human hand-arm system of driving point 42 IS 14917(Pt 1):2001 Mechanical vibration – Laboratory method for evaluating vehicle JAN 01 /ISO 10326:1992 seat vibrations – Part 1: Basic requirements 43 IS 14918:2001 Mechanical vibration – Method and criteria for the mechanical FEB 01 /ISO 11342:1992 balancing of flexible rotors (Superseding IS 13279:1992 and IS 13280:1992) 44 IS 14979:2001 Mechanical vibration and shock – Distribution to human activity and SEP 01 /ISO 9996:1996 performance classification

DRAFT STANDARDS COMPLETED WIDE CIRCULATION Doc:ME 28(0659) Mechanical vibration – Evaluation of machine vibration by measurements on

non-rotating parts – Part 2 – Large land based steam turbine generator sets in excess of 50 MW ( Adoption of ISO 10816-2: 1996)

Doc:ME 28(0660) Mechanical vibration – Evaluation of machine vibration by measurements on

non-rotating Parts – Part 3 - Industrial machines with nominal power above 15 kW and Nominal speed between 120 r/min and 15000 r/min when measured in situ (Adoption of ISO 10816-3: 1998)

Doc:ME 28(0661) Mechanical vibration – Evaluation of machine vibration by measurements on

Non-rotating Parts – Part 4 - Gas turbines driven sets excluding aircraft derivatives (Adoption of ISO 10816-4: 1998)

Doc:ME 28(0662) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating Parts – Part 5 - Machine sets in hydraulic power generating and pumping and

Pumping plants(Adoption of ISO 10816-5: 2000) Doc:ME 28(0663) Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating Parts – Part 6 - Reciprocating machines with power rating above 100 kW. (Adoption of ISO 10816-6: 1995)

55

ME 29 SEWING MACHINES

Scope - a) Formulation of standards on sewing machines, sewing machine parts and accessories for

household and industrial purposes. b) Co-ordination of work with ISO/TC 148 Sewing machines.

SLNO IS.NO./DOC.NO. TITLE REAFFIRM / NO.OF PRINTED AMDTS.

STANDARDS PUBLISHED 1 ** IS 1294:1989 Bobbins for sewing machines for household purposes (third revision) NOV 98 2 ** IS 1295:1990 Household sewing machines - Needle bar – Specification AUG 00 second revision) 3 IS 1296:1989 Household sewing machines - Needle bar – Specification NOV 98

(second revision)

4 IS 1297:1991 Household sewing machines - Presser bar – Specification APR 02 (third revision)

5 IS 1610:2000 Household sewing machines - General requirements (third revision) JAN 00 6 IS 2181:1973 Household sewing machine needles (first revision) AUG 00 1 7 IS 3290:1994 Household sewing machines - Thread take-up lever sub-assembly APR 02

for cam type sewing machines - Specification (third revision) 8 IS 3291:1968 Thread take up cams for sewing machines for household purposes NOV 02 1 (first revision) 9 IS 3299:1969 Oscillating-rock shafts for sewing machines for household purposes AUG 00 1 (first revision) 10 IS 3375:1991 Household sewing machines - Bobbin case – Specification APR 02

(second revision)

11 IS 3816:1966 Connecting rods for sewing machines for household purposes AUG 00 1 12 IS 3817:1991 Household sewing machines - Arm shaft - Specification (first revision) APR 02 13 IS 3868:1966 Feed lifting rock shaft for sewing machines for household purposes AUG 00 14 IS 4181:1967 Feed fork for sewing machines for household purposes AUG 00 1 15 IS 4188:1996 Household sewing machines - Oscillating shafts – Specification AUG 00 (first revision) 16 IS 4338:1991 Household sewing machines - Vertical oscillating shuttle - APR 02 Specification(second revision) 17 IS 4339:1997 Needle bar link studs for sewing machines for household purposes NOV 02

(first evision) 18 IS 4340:1967 Needle bar links for sewing machines for household purposes AUG 00 2 19 IS 4341:1997 Feed holder roller for sewing machines for household purposes(first APR 02 revision)


56

20 IS 4342:1967 Square slider for oscillating rock shaft for sewing machines for AUG 00 household purposes 21 IS 4632:1968 Square slider for stitch regulator shaft for sewing machines for AUG 00 1 household purposes 22 IS 4735:1968 Arm shaft cams for sewing machines for household purposes AUG 00 1 23 IS 5740:1996 Household Sewing Machines - Memorandum on screw threads for AUG 00

sewing machine components (first revision) 24 IS 6903:1973 Glossary of terms relating to sewing machines for household purposes AUG 00 25 IS 7491:1989 Sewing machines, household - Accuracy requirements (first revision) NOV 98 26 IS 7492:1989 Sewing machines, household - Sewing requirements (first revision) NOV 98 27 IS 7493:1989 Sewing machines, household - Durability requirements (first revision) NOV 98 28 IS 8892:1978 Bobbins for sewing machines with rotating hooks for industrial use AUG 00 29 IS 9152:1979 Glossary of terms and identification symbols relating to classification AUG 00 of industrial sewing machines 30 IS 9697:1980 Bobbin cases for sewing machines with rotating hooks for industrial use AUG 00 31 IS 9874:1981 Arm and bed assembly for sewing machines for household purposes NOV 02 32 IS 10040:1981 Rotating hooks for sewing machines for industrial use NOV 02 33 IS 10304:1982 Feed rock shaft for sewing machines for household purposes NOV 02 34 IS 10305:1982 Feed rock shaft crank for sewing machine for household purposes NOV 02 35 IS 10306:1982 Feed lifting rock shaft for sewing machines for household purposes NOV 02 36 IS 11280:1996 House hold sewing machines - Feed bar - Specification (first revision) APR 02 37 IS 11345:1985 Oscillating shaft crank for sewing machines for household purposes AUG 00 38 IS 11347:1995 Household sewing machines - Shutter driver - Specification (first APR 02 revision) 39 IS 12058:1987 Slide plates for sewing machines for household purposes NOV 02 40 IS 12109:1987 General requirements for light duty sewing machine heads for NOV 02 industrial 0use 41 IS 12740:1989 Household sewing machines - Stand - Specification NOV 98 42 IS 12789:1989 Household sewing machines - Tables and base NOV 98 43 IS 12798:1989 Household sewing machines - Fly wheels - Specification NOV 98 44 IS 13120:1991 Household sewing machines - Flywheel bush - Specification APR 02 45 IS 13192:1991 Household sewing machines - Hand attachment assembly APR 02 46 IS 13806:1993 Household sewing machine - Closed type shuttle race assembly - NOV 98 Specification 47 IS 13825:1993 Household sewing machines - Arm shaft front bush - Specification APR 02

57

48 IS 13872:1993 Household sewing machines - Stitch regulator - Specification NOV 98 1 49 IS 13972:1994 Household sewing machines - Bobbin winder assembly - Specification NOV 98 50 IS 14207:1994 Household sewing machines - Open type shuttle race sub-assembly - AUG 00 Specification 51 IS 14477:1997 Industrial sewing machines (Light duty) - Stand - Specification NOV 02 52 IS 14761:2000 Link type thread take up lever sub-assembly for industrial sewing APR 00 machine – specification 53 IS 14769:2000 Household sewing machine head – General requirements APR 00 54 IS 15169:2002 Needles for sewing machines for industrial purpose - Specification JUN 02 55 IS 15312:2002 Method of tests for seam puckering on material sewn by industrial FEB 03 sewing machines 56 IS 15313:2003 Method of tests for vibration measurement for industrial sewing machines FEB 03 57 IS 15314:2002 Method of tests for tightness and balance of stitches on seam, sewn MAR 03 by industrial sewing machines

DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC:MED 29(0641) Zig zag sewing machine head for household purposes – General requirements DOC:MED 29(0642) Zig zag sewing machine head for household purposes – Accuracy requirements DOC:MED 29(0643) Zig zag sewing machine head for household purposes – Sewing requirements DOC:MED 29(0644) Zig zag sewing machine head for household purposes – Durability requirements

58

ME 30 GASKETS AND PACKING

Scope - Formulation of standards for radial shaft seals, gaskets and packings made from asbestos, cork, rubber, paper, rope, metal and combinations there of.

SLNO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS STANDARDS PUBLISHED 1 IS 2712:1998 Compressed asbestos fibre jointings (third revision) MAR 99 3 2 ** IS 4253(PT 1):1980 Cork composition sheets:Part 1 Plain cork MAR 99 2 3 ** IS 4253(PT 2):1980 Cork composition sheets:Part 2 Cork and rubber (first revision) MAR 99 3 4 IS 4687:1995 Gland packing asbestos (second revision) NOV 01 5 IS 4688:1968 Specification for proofed cotton duck, gland packing MAR 99 6 IS 5129(PT 1):2000 Rotary shaft lip type seals – Part 1: Nominal dimensions JUL 00 /ISO 6194/1:1982 and tolerances (second revision) 7 * IS 5129(PT 2):1987 Rotary shaft radial lip type oil seal units Part 2: Terminology and MAR 03 Recommendations for storage, handling and installation

(Second revision)

8. IS 5129(Pt 3):2000 Rotary shaft lip type seals Part 3: Storage - JUL 00 /ISO 6194/3: 1988 handing and installation 9 IS 5129(Pt 4):2000 Rotary shaft lip type seals Part 4: Performance test JUL 00 /ISO 6194/4:1988 procedures 10. IS 5129(Pt 5):2000 Rotary shaft lip type seals Part 5: Identification of JUL 00 /ISO 6194/5:1990 visual imperfections 11. IS 5414:1995 Gland packing, jute and hemp (first revision) NOV 01 12 IS 5566:1970 Vegetable fibre base jointing material MAR 99 13 ** IS 5569:1970 Cork and cellulose base jointing material MAR 99 14 IS 6210:1979 Method of test for stress relaxation of gasket materials (first MAR 99 revision) 15 **IS 7714:1975 Method of sealability test for gasket material (first revision) MAR 99 16 ** IS 7719:1975 Metallic spiral wound gaskets MAR 99 1 17 IS 9066:1979 Specification for lubricated cotton gland packings MAR 99 18 ** IS 9975(PT 1):1981 Ò' Rings Part 1: Dimensions MAR 99 2 19 ** IS 9975(PT 2):1984 ` O’ Rings Part 2: Material selection and quality acceptance criteria MAR 99 20 ** IS 9975(PT 3):1984 Ò' Rings Part 3: Seal housing dimensions, tolerances and design MAR 99 1 criteria for standard applications 21 ** IS 9975(PT 4):1984 Ò' Rings Part 4 : Terminology and definition of terms MAR 99


59

22 IS 10008:1992 Beater addition jointings - Specification (first revision) MAR 03 1 23 ** IS 10330:1982 Formed asbestos packing rings of high pressure and high MAR 99

temperature valves 24 ** IS 10864:1984 Recommendation for heat exchanger gasket MAR 99 25 ** IS 11149:1984 Rubber gaskets - Specification MAR 99 1 26 IS 13257:1992 Ring type joint gasket and grooves for pipe flanges - Specification NOV 01 27 IS 14538(PT 1):1998 Gaskets and packings – Part 1: Composition cork - Specification JUN 98 28 IS 14538(PT 2):1998 Gaskets and packings – Part 2: Compositions cork - Test methods MAY 98 29 IS 14539:1998 Insulation mill board - Specification OCT 98

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT DOC:MED 30/LMD 19(481) Material for rubber seal of outer ring used for gas supply

pipelines - Specification

DOC:MED 30(0640) Rotary shaft lip type seal- Part 2: Vocabulary (Third revision of IS 5129(Part 2) Adoption of ISO 6194 -2: 1981)

60

ME 31 OPTICAL AND MATHEMATICAL INSTRUMENTS

Scope - a) Formulation of standards for surveying instruments, drawing instruments; optical instruments (excluding medico- optical instruments) and their components and materials. b) Coordination of work with ISO/TC 172 Optics and optical Instruments.


STANDARDS PUBLISHED 1 IS 988:1959 General requirements for optical components AUG 00 2 IS 1360:1989 Engineers' pattern tee squares (second revision) OCT 99 3 IS 1399:1959 Glossary of terms used in optical technology AUG 00 4 IS 1400:1960 Optical glass AUG 00 1 5 IS 1444:1989 Engineers' pattern drawing boards (second revision) OCT 99 6 IS 1480:1970 Metric scales for general purposes (first revision) JUL 98 2 7 IS 1481:1970 Metric steel scales for engineers (first revision) JUL 98 2 8 IS 1491:1959 Metric scales for architectural purposes AUG 00 9 IS 1492:1970 Metric surveying chains (first revision) JUL 98 2 10 IS 1561:1989 Set squares for use of drawing offices (first revision) OCT 99 1 11 IS 1562:1962 Metric diagonal scales (cartographers, surveyors and engineers) AUG 00 1 12 IS 1563:1989 Protractors for use of drawing offices (first revision) OCT 99 1 13 IS 1632:1993 Optical instruments - Bubbles - Specification (first revision) JUL 98 14 IS 1764:1961 Trough compass AUG 00 15 IS 1779:1961 4-Metric, levelling staff, folding type AUG 00 16 IS 1842:1961 Surveying chain pins (arrows) AUG 00 17 IS 1955:1961 Prismatic compasses, liquid AUG 00 18 IS 1957:1961 Prismatic compasses, non-liquid AUG 00 19 IS 2233:1962 Straightedges for drawing offices use AUG 00 20 IS 2286:1963 Pantograph AUG 00 21 IS 2287:1970 Drafting machines (first revision) AUG 00 1 22 IS 2288:1963 Ranging rods AUG 00 23 IS 2466:1963 Beam compasses AUG 00 24 IS 2539:1963 Plane tables AUG 00 1 25 IS 2666:1963 Slide rules (linear type) AUG 00 2


61

26 IS 2754:1964 General requirements for optical instruments AUG 00 2 27 IS 2976:1964 Optical theodolite AUG 00 28 IS 2988:1995 Vernier theodlite - Specification (first revision) NOV 01 29 IS 3081:1994 Microscopes - General purposes - Dimensions and marking OCT 99

(first revision) 30 IS 3099(Pt 1&2):1992 Microscopes - Slips and slides - Specification: Part 1 Microscope JAN 03 3 slips; Part 2 Microscope slides (first revision) 31 IS 3113:1965 Prismatic binoculars for common use AUG 00 1 32 IS 3135:1965 Cathetometer AUG 00 33 IS 3206:1989 Engineers' drawing instruments, dividers (first revision) OCT 99 34 IS 3207:1989 Engineers' drawing instruments, rotating compasses (first revision) OCT 99 35 IS 3208:1989 Engineers' drawing instruments, half set of compasses (first OCT 99

revision) 36 IS 3209:1989 Engineers' drawing instruments, spring bow compasses (first OCT 99

revision) 37 IS 3210:1989 Engineers' drawing instruments, drawing pens (first revision) OCT 99 38 IS 3211:1991 Engineers' drawing instruments, pen points - Specification (first AUG 00 revision) 39 IS 3212:1991 Engineers' drawings instruments, lengthening bars – Specification AUG 00 (first revision) 40 IS 3213:1991 Engineers' drawing instruments, handles - Specification (first AUG 00

revision) 41 IS 3214:1991 Engineers' drawing instruments, pencil points - Specification (first AUG 00 revision) 42 IS 3215:1991 Engineers' drawing instruments, needle points - Specification (first AUG 00 revision) 43 IS 3216:1989 Engineers' drawing instruments, needles – Specification OCT 99

(first revision 44 IS 3217:1991 Engineers' drawing instruments, prickers - Specification (first AUG 00

revision) 45 IS 3218:1968 Paralleled rulers, 150 mm (link type) JUL 98 46 IS 3219:1966 Engineers' drawing instruments, boxes for reads and needles AUG 00 47 IS 3220:1966 Engineers' drawing instruments, screw drivers AUG 00 48 IS 3221:1966 Set for drawing instruments AUG 00 49 IS 3222(PT 1):1989 Instruments screws: Part 1 Fasteners for drawing instruments OCT 99 (first revision) 50 IS 3686:1966 Student type microscope AUG 00 2 51 IS 4328:1967 Monocular dissecting microscope AUG 00 2

62

52 IS 4329:1967 Measuring (travelling) microscope AUG 00 1 53 IS 4380:1967 Abneyd level AUG 00 1 54 IS 4590:1980 Secondary level (first revision) AUG 00 1 55 IS 5146:1969 Sounding sextant AUG 00 56 IS 5148:1969 Hand magnifiers (circular) 50 mm, 75 mm and 100 mm AUG 00 57 IS 5153:1969 Proportional compasses - 150 mm, 200 mm and 300 mm OCT 99 58 IS 5204:1969 Research microscope AUG 00 3 59 IS 5205:1969 Drawing pins JUL 98 60 IS 5213:1969 French curves for drawing office use JUL 98 1 61 IS 5415:1969 Code of practice for packing and packaging of optical and OCT 99 mathematical instrument and components 62 IS 5694:1970 Engineers' drawing instruments, dotting pens JUL 98 1 63 IS 5706:1993 Optical instruments - Spirit levels for use in precision engineering - AUG 00 Specification (first revision) 64 IS 5726:1970 Engineers' drawing instruments, bordering pens JUL 98 65 IS 5737:1970 Engineers' drawing instruments, curve pens JUL 98 66 IS 5920:1970 Recommendations for the preparation of drawings for optical JUL 98 1 elements and systems 67 IS 5928:1970 Tangent clinometer AUG 00 68 IS 6425:1971 Dioptometer (lensometer) JUL 98 2 69 IS 6471:1971 spectrometer (student type) JUL 98 1 70 IS 7009:1973 Optical square (for surveying) JUL 98 71 IS 7010:1973 Pivots for compasses AUG 00 1 72 IS 7011:1973 Back-silvered mirrors used in instrument industry AUG 00 1 73 IS 7020:1973 Crystals and dielectric materials used in instrument industry AUG 00 74 IS 7047:1973 Timbers used in instrument industry AUG 00 75 IS 7078:1973 Plastics used in instrument industry AUG 00 76 IS 7265:1973 Coating materials AUG 00 77 IS 7543:1975 Planimeters JUL 98 78 IS 7544:1975 Parallel ruler (roller type) JUL 98 79 IS 7545:1975 Optical bench (advanced type) OCT 99 80 IS 7919:1975 Refractometer-abbe type OCT 99 81 IS 8248:1976 Anti reflection coating on glass optical components AUG 00

63

82 IS 8275:1976 Binocular eyepieces for microscope OCT 99 1 83 IS 8311:1976 Instrument jewels OCT 99 1 84 IS 8330:1986 Tripod for surveying instruments (first revision) AUG 00 85 IS 8390:1977 Arc combs OCT 99 86 IS 8630:1977 Engineers' drawing instrument, double line pens AUG 00 1 87 IS 8651:1977 Flame photometer OCT 99 88 IS 8661:1977 Polarimeter and saccharimeter (optical) OCT 99 89 IS 8679:1978 Triangular scales AUG 00 90 IS 8680:1978 Engineers' drawing instruments, compass bowl pen double AUG 00 knee jointed with sector head joints 91 IS 8681:1978 Engineers' drawing instruments, compass bow pencil double AUG 00 knee jointed with sector head joints 92 IS 8691:1986 Mirror stereoscope (first revision) AUG 00 93 IS 9107:1979 Autocollimator OCT 99 2 94 IS/ISO 9176:1988 Tubular technical pens – Adopter for compasses AUG 00 95 IS/ISO 9177-1:1989 Mechanical pencils: Part 1 Classification, dimensions, NOV 01 performance requirements and testing 96 IS/ISO 9177-2:1989 Mechanical pencils: Part 2 Black leads - Classification and NOV 01

dimensions 97 IS/ISO 9177-3:1994 Mechanical pencils: Part 3 Block leads – Bonding strength of AUG 00

HB lead 98 IS/ISO 9178-1:1988 Templates for lettering and symbols : Part 1 General principles NOV 01 and identification markings 99 IS/ISO 9178-2:1988 Templates for lettering and symbols: Part 2 Slot widths for NOV 01 wood cased pencils, clutch pencils and fine lead pencils 100 IS/ISO 9178-3:1989 Templates for lettering and symbols: Part 3 Slot widths for NOV 01

technical pens with tubular tips in accordance with ISO 9175-1 101 IS/ISO 9179-1:1988 Technical drawings - Numerically controlled draughting NOV 01

machines – Part 1 Vocabulary 102 IS/ISO 9180:1988 Black leads for wood-cased pencils - Classification and AUG 00

diameters 103 IS 9514:1980 Front surface aluminized mirrors AUG 00 104 IS 9571:1980 Photoelectric colorimeters (single beam) AUG 00 105 IS 9607:1980 Tertiary level AUG 00 1 106 IS 9613:1980 Primary level AUG 00 107 IS 9680:1980 Materials for light duty springs for instrument industry OCT 99 108 IS/ISO 9849:1991 Optics and optical instruments – Geodetic instruments – AUG 00 Vocabulary 109 IS 9892:1981 Subtense bar JUL 98

64

110 IS 9898:1981 Helictrope surveying JUL 98 111 IS/ISO 9960-1:1992 Draughting instruments with or without graduation: Part 1 NOV 01

Draughting scale rules (Superseding IS 1482:1985) 112 IS/ISO 9962-1:1992 Manually operated draughting machines: Part 1 Definitions, AUG 00 classification and designation 113 IS/ISO 9962-2:1992 Manually operated draughting machines: Part 2 Characteristics, NOV 01 performance, inspection and marking (Superseding IS 2287:1970) 114 IS/ISO 9962-3:1994 Manually operated draughting machines : Part 3 dimensions of NOV 01 scale rule check plates 115 IS 10236(PT 1):1989 Procedure for basic climatic and durability tests for optical OCT 99 instruments: Part 1 General 116 IS 10236(PT 2):1982 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 2 Dry heat test 117 IS 10236(PT 3):1982 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 3 Cold test 118 IS 10236(PT 4):1982 Procedure for basic climatic and durability test for optical OCT 99 instruments Part 4 Damp heat test 119 IS 10236(PT 5):1982 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 5 Damp heat (cyclic) test 120 IS 10236(PT 6):1982 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 6 Salt mist test 121 IS 10236(PT 7):1983 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 7 Mould growth test 122 IS 10236(PT 8):1983 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 8 Thermal shock (rapid change of

temperature) test 123 IS 10236(PT 9):1983 Procedure for basic climatic and durability test for optical OCT 99 instruments: Part 9 Low air pressure (altitude) test 124 IS 10236(PT 10):1985 Procedure for basic climatic and durability test for optical AUG 00 instruments: Part 10 Bump test 125 IS 10236(PT 11):1985 Procedure for basic climatic and durability test for optical AUG 00 instruments: Part 11 Vibration test 126 IS 10236(PT 12):1985 Procedure for basic climatic and durability test for optical AUG 00 instruments: Part 12 Shock test 127 IS 10236(PT 13):1986 Procedure for basic climatic and durability test for optical AUG 00 instruments: Part 13 Dust test 128 IS 10236(PT 14):1986 Procedure for basic climatic and durability test for optical AUG 00 instruments: Part 14 Driving rain test 129 IS 10236(PT 15):1986 Procedure for basic climatic and durability test for optical JUL 98 instruments: Part 15 Drop test 130 IS 10236(PT 16):1988 Procedure for basic climatic and durability test for optical JUL 98 instruments: Part 16 Solar radiation test 131 IS 10236(PT 17):1988 Procedure for basic climatic and durability test for optical JUL 98 instruments: Part 17 Acceleration (steady state test)

65

132 IS 10236(PT 18):1988 Procedure for basic climatic and durability test for optical JUL 98 instruments: Part 18 Sealing test 133 IS 10679:1983 Photoelectric spectrophotometer single beam type OCT 99 134 IS 10695:1983 Pocket stereoscope OCT 99 135 IS/ISO 11145:1994 Optics and optical instruments – Lasers and laser – related NOV 01 equipment – Vocabulary and symbols 136 IS 11444:1985 Grinding and polishing materials for optical components AUG 00 137 IS 11445:1985 Parallax bar OCT 99 138 IS 11781:1986 Stencil templates and pen tips AUG 00 139 IS 11961:1986 4-metric levelling staff (telescopic) AUG 00 140 IS 12353:1988 Stencil templates for geometrical figures JUL 98 141 IS 12428:1988 Scribing tools JUL 98 142 IS 12713:1989 Permissible cosmetic defects and inspection of optical OCT 99

components 143 IS 12874:1989 Telescopic alidade OCT 99 144 IS 12888:1989 Distance meter (IR) OCT 99 145 IS 13011(PT 1):1990 Over head projectors: Part 1 Projection stages - Dimensions AUG 00 /ISO 7943-1:1987 146 IS 13011(PT 2):1990 Over head projectors: Part 2 Projection stages - Transparencies AUG 00 /ISO 7943-2:1987 and transparencies frames 147 IS 13011(PT 3):1990 Over head projectors:Part 3 Projection stages - Film rolls cores AUG 00 /ISO 7943-3:1987 and windows - Dimensions 148 IS 13108(pt 1):2002 Optics and optical instruments – Microscopes: Part 1 Immersion oil for NOV 02 /ISO 8036-1:1998 general use in light microscopy (first revision) 149 IS 13117:1991 Microscopes' connecting dimensions of tube slides and tube slots AUG 00 /ISO 8040:1986 150 IS 14146:1994 Raw optical glass - Resistance to attack by aqueous alkaline OCT 99 /ISO 9689:1990 phosphate-containing detergent solutions at 50oC - Testing and classification 151 IS 14258:1995 Raw optical glass - testing of the resistance to attack by OCT 99 /ISO 8424:1987 Aqueous Solutions at 25oC and classification 152 IS 14260:1995 Glass and glass-ceramics - Knoop hardness test OCT 99 /ISO 9385:1990 153 IS 14440:1997 Drawing Instruments - Tubular tips for hand held technical pens JAN 03 using India ink on tracing paper - Specification 154 IS 14819:2000 Optics and optical instruments - Lasers and Laser - Related JUL 00 /ISO 11670:1999 equipment - Test Method for laser beam parameters beam

positional stability

155 IS 14820:2000 ptics and optical instruments - Lasers and Laser related equipment – JUL 00 /ISO 11146:1999 Test method for laser Beam Parameters:Beam widths, Divergence

Angle and Beam Propagation Factor 156 IS 14821:2000 Optics and optical instruments – Environmental test methods – JUN 00 /ISO 9022-13:1998 Combined shock, bump or free fall and dry heat or cold

66

157 IS 14822:2000 Optics and optical instruments – Environmental test methods – JUL 00 /ISO 9022-15:1998 Combined digitally controlled broad-band random vibration and dry heat or cold (Adoption of ISO 9022-15:1998) 158 IS 14823:2000) Optics and optical instruments – Environmental test methods – JUN 00 /ISO 9022-10:1998 Combined sinusoidal vibration and dry heat or cold 159 IS 14859:2000 Specification for Hindi (Devnagri) stencil – Templates and pen tips OCT 00 160 IS 14963:2001 Optics and optical instruments – Laser and laser related equipment – JUN 01 /ISO 11554:1998 Test methods for laser beam power, energy and temporal

characteristics 161 IS 14964:2001 Raw optical glass – Grindability with diamond pellets – Test methods JUN 01 / ISO 12844:1999 and classification

162 I S 14965:2001 Laser and laser related equipment – Test methods for laser beam JUN 01 / ISO 12005:1998 parameters – Polarization 163 IS 14966:2001 Optics and optical instruments – Environmental test methods – JUN 01 / ISO 9022-16:1998 Combined bounce or steady - state acceleration and dry heat or cold

164 IS 14967:2001 Optics and optical instruments – Environmental test methods – JUN 01 / ISO 9022-21:1998 Combined Low pressure and ambient temperature or dry heat 165 IS 15268(Pt 1):2002 Optics and optical instruments – Microscopes – Slides: DEC 02 /8037-1:1986 Part 1 Dimensions, optical properties and marking 166 IS 15268(Pt 2):2002 Optics and optical instruments – Microscopes – Slides: Part 2 DEC 02 Quality of material, standards of finish and mode of packaging 167 IS 15269:2002 Optics and optical instruments – Microscopes – Magnification FEB 03 /ISO 8039:1997 168 IS 15270(Pt 1):2002 Optics and optical instruments – Microscopes – Cover glasses: NOV 02 /ISO 8255-1:1986 Part 1 Dimensional tolerances thickness and optical properties 169 IS 15270(Pt 2):2002 Optics and optical instruments – Microscopes – Cover glasses: NOV 02 /ISO 8255-2:1997 Part 2 Quality of material, standards of finish and mode of packaging

DRAFTS STANDARDS IN WIDE CIRCULATION Doc ME 31 (665) Tripod for Surveying instruments (Fixed leg type)

(first revision of IS 8330) DOC: ME 31(723) Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1 Inner levelling staffs (Adoption of ISO 12858-1:1999) DOC: ME 31(724) Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2 Tripods (Adoption of ISO 12858-2:1999)

DRAFT STANDARD REDRAFTED Doc ME 31 (637) Code of practice for laser safety

67

ME 32 PHOTOGRAPHIC EQUIPMENT

Scope:- a) Terminology, material requirements, measurements, tests, calculations and performance for photographic equipment and accessories including cameras but excluding chemicals, paper and film. b) Co-ordination of work with ISO/TC 42 Photography.

SLNO IS.NO./DOC.NO. TITLE REAFFIRM NO.OF PRINTED AMDTS STANDARDS PUBLISHED 1 ** IS 9915:1981 Lens aperture markings, still cameras FEB 00 2 ** IS 9916:1981 Distance scale markings of photographic lenses FEB 00 3 IS 9948:1981 Shutter exposure-time markings still cameras OCT 01 4 IS 10547:1983 Camera accessory shoes for photoflash lamps and electronic OCT 01 photoflash units 5 IS 10567:1983 Dimensions and designations of optical filter mounts for photographic OCT 01 equipment 6 IS 10750(PT 1):1983 Shutter cable release, photographic: Part 1 Fitting dimensions of tip OCT 01 and socket 7 IS 10784:1983 Dimensions of small flash connections for hand-held cameras OCT 01 8 IS 10835:1984 Tripod connections, photographic OCT 01 1 9 IS 10906:1992 Photography - Cameras using films 35 mm and 16 mm film - Picture NOV 02 /ISO 1754:1986 sizes (first revision) 10 IS 10912:1992 Photography - Roll film cameras - Back window location an picture NOV 02 /ISO 1203:1984 sizes (first revision) 11 IS 10917:1984 Exposure meters (photoelectric type) for general purposes OCT 01 /ISO 2720-1974 12 IS 11164:1992 Photography - Front lens barrels up to 127 mm Dimensions important NOV 02 /ISO 1948:1987 to the connection of auxiliaries (first revision) 13 IS 12568:1988 Methods for testing black and white photographic enlargers FEB 00 14 IS 14620:1998 Photography - Determination of flash guide numbers NOV 98 /ISO 1230:1992 15 IS 14621:1998 Photography - Electronic flash equipment - Determination of light NOV 98 /ISO 2827:1998 output and performance 16 IS 14622:1998 Photography - Electronic flash equipment - Automatic control of NOV 98 /ISO 5763:1998 exposure


68

17 IS 15046:2001 Photography - Cameras - Automatic contrast of exposure NOV 01 /ISO 2721:1982 18 IS 15047:2002 Photography – Electronics flash equipment – Connectors to JAN 02 /ISO 8581:1994 synchro - cord 19 IS 15048:2001 Optics and optical instruments – Optical transfer function OCT 01 /ISO 9336-1:1994 application – Part 1 Interchangeable lenses for 35mm still cameras 20 IS 15049:2002 ) Photography – Handheld cameras – Flash connectors dimensions JAN 02 /ISO 519:1992 21 IS 15050:2001 Photography – Projector slides – Dimensions NOV 01 /ISO 1755:1987

DRAFT STANDARDS UNDER PRINT DOC:MED 32(695) Photography - Projection in indoor rooms Part 1 Screen illumination Test for still projectors (Adoption of ISO 11315-1:1997) (ICS 37.040.10) DOC:MED 32(696) Photography - Projection in indoor rooms Part 2 Screen luminance test For still and video projection (Adoption of ISO 11315-2:1997) (ICS 37.040.10) DOC:MED 32(697) Photography - Projection in indoor rooms Part 3 Classification of Transmitting projection screens and measurement of their transmitted Luminance levels (Adoption of ISO 11315-3:1999) (ICS 37.040.10)

DRAFT STANDARDS IN WIDE CIRCULATION DOC:MED 32(703) Photography - Overhead projectors - Methods for measuring and reporting performance characteristics (Adoption of ISO 9767:1990) DOC:MED 32(704) Photography - Flash exposure meter - Requirements (Adoption of ISO 10157:1991) DOC:MED 32(705) Photography - Camera lenses - Measurement of ISO spectral Transmittance (Adoption of ISO 8478:1996)

69

ME 33 UTENSILS, CUTLERY DOMESTIC HARDWARE SECTIONAL COMMITTEE SCOPE - a) Formulation of standards in the field of utensils, cutlery and domestic hardware items. b) Coordination of work with ISO/TC 186 SL NO IS.NO./DOC.NO. TITLE REAFFIRM/ NO.OF

PRINTED AMDTS. STANDARDS PUBLISHED 1* IS 275:1982 Padlocks lever type, hand made (third revision) AUG 00 2 IS 726:1982 Galvanized steel buckets for general use (second revision) AUG 00 3 IS 921:1965 Butcher's knives (first revision) SEP 98 4 IS 922:1965 Cook's knivers (first revision) SEP 98 5 IS 923:1965 Carving knives (first revision) SEP 98 6 IS 924:1965 Bread knives (first revision) SEP 98 7 IS 925:1966 Pocket knives (first revision) AUG 00 8 IS 990:1982 Spoons, stainless steel (second revision) SEP 98 9 IS 991:1964 Spoons, brass and nickel silver (revised) SEP 98 10 IS 992:1964 Forks, (table, fish, pastry and serving), stainless steel (first revision) SEP 98 11 IS 993:1964 Forks (table, fish, pastry and serving), brass and nickel silver (first SEP 98 revision) 12 * IS 994:1964 Butter knives and fish knives SEP 98 13 IS 995:1982 Table knives, dessert knives and fruit knives (second revision) AUG 00 14 IS 1018:1982 Padlocks, brass lever type, machine made (second revision) AUG 00 15 **IS 1660(PT 1):1982 Wrought aluminium utensils : Part 1 Cooking table, serving storing SEP 98 5 and baking utensils (second revision) 16 **IS 1660(PT 5):1966 Part 5 Thick bottom utensils SEP 98 2 17 **IS 1660(PT 6):1980 Part 6 Compartmental trays SEP 98 18 **IS 1660(PT 7):1970 Part 7 Box, lunch SEP 98 2 19**IS 2347:1995 Domestic pressure cooker (fourth revision) MAR 02 20 IS 3545:1982 Meat choppers (first revision) SEP 98 21 IS 3546:1966 Vegetable knives SEP 98 22 IS 3721:1966 Cheese cutting knives for table use AUG 00 23 **IS 4109:1967 Kadahies SEP 98 24 **IS 4119:1987 Press-charcoal-burning (first revision) SEP 98


70

25 IS 4120:1967 Tubs,and baths AUG 00 26 * IS 4230:1967 Lock, lever tumbler type SEP 98 1 27 * IS 4231:1967 Lock, miller type AUG 00 28 *IS 4536(PT 1):1987 Composite bottom stainless steel cooking utensils Part 1 Copper SEP 98 electrodeposited (first revision) 29 *IS 4536(PT 2):1969 Part 2, 3-Ply construction SEP 98 30 * IS 4536(PT 3):1987 Part 3 Copper Clad SEP 98 31 IS 4768:1981 Stainless steel buckets (first revision) MAR 02 32 IS 4822:1981 Brass cooking utensils (first revision) MAR 02 33 IS 6291:1971 Knife, clasp SEP 98 34 IS 6799:1987 Padlocks, bicycle (first revision) MAR 02 35**IS 6808:1972 Grinder, hand domestic SEP 98 36 IS 6880:1972 Machine, Sewian (Vermicall) MAR 02 37 IS 7185:1981 Boiler, milk, aluminium (first revision) SEP 98 38 IS 7211:1973 Mincer, hand operated, clamp type AUG 00 39 IS 7257:1973 Trunks, steel, domestic AUG 00 40 IS 7376:1980 Culinary measures for household purposes (first revision) MAR 02 41 IS 7763:1975 Extractor, juice, domestic MAR 02 42 IS 7813:1975 Box, aluminium, rectangular SEP 98 43 IS 9040:1978 Methods for sampling of utensils SEP 98 44 IS 9246:1979 Chapati machine MAR 02 45** IS 9730:1981 Non stick unreinforced plastics coatings on domestic cooking utensils AUG 00 1 46 * IS 12197:1987 Specification for padlocks, pin tumbler type SEP 98 47 IS 13395:1995 Performance of handles and handle assemblies attacked to JAN 00

cookware 48 IS 14756:2000 Stainless steel cooking utensils JAN 00 49. IS 15104(Part 1):2002 Materials and articles in contact with foodstuffs – Cutlery and table MAY 02 /ISO 8442-1:1997 holloware – Part 1: Requirements for cutlery for the preparation of food 50. IS 15104(Part 2):2002 Materials and articles in contact with foodstuffs – Cutlery and table APR 02 /ISO 8442-2:1998 Holloware – Part 2 Requirements for stainless steel and silver-plated cutlery 51. IS 15104(Part 3):2002 Materials and articles in contact with foodstuffs – Cutlery and table APR 02 /ISO 8442-3:1997 Holloware – Part 3 Requirements for silver-plated table and decorative holloware 52. IS 15104(Part 4):2002 Materials and articles in contact with foodstuffs – Cutlery and table APR 02 /ISO 8442-4:1998 Holloware – Part 4 Requirements for gold-plated cutlery

71

FINALIZED DRAFT UNDER PRINT DOC:MED 33/LMD 27(4180) Padlocks (Superseding IS 4230:1967, IS 4231:1967 and IS 12197:1987)

DRAFT STANDARDS/AMENDMENT FINALIZED BUT NOT YET UNDER PRINT DOC:MED 33(577) Materials and articles in contact with food stuffs – Cutlery and And table holloware – Part 5 Specification for sharpness and edge Retention test for cutting DOC:MED 33(578) Material and articles in contact with food stuffs – Cutlery and table Holloware – Part 6 Lightly silver-plated hollowares protected by lacquer DOC:MED 33(579) Material and articles in contact with food stuffs – Cutlery and table Holloware – Part 7 Requirements of cutlary made of siliver, other precious Metals and their alloys DOC:MED 33(580) Material and articles in contact with food stuffs – Cutlery and table Hollowware – Part 8 Requirements for silver table and decorable holloware DOC:MED 33(702) Amendment No. 6 to IS 1660(Part 1):1982 Specification for wrought aluminium utensils Part 1 Cooking, table, serving, storing and baking utensils (Second revision)

DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC: MED 33/LMD 27(4120) Sandwich bottom/composite bottom stainless steel cooking utensils ( Revision of IS 4536(Pt 1 to 3)

72

ANNEX A

STANDARDS WITHDRAWN / SUPERSEDED

COMM . IS.NO. TITLE NO.

31 IS:1482-1985 Metric scales for use with drafting machines (first revision)

[Superseded by IS/ISO 9960-1] 20 IS:1520-1980 Horizontal centrifugal pumps for clear, cold,, fresh water

(second revision) (withdrawn) 18 IS 2093:1974 Specification for distributors for hot tar and bitumen

(first revision) [Superseded by IS 2094(Pt 2)] 31 IS:2352-1963 Procedure for basic climatic and durability tests for optical

instruments (withdrawn) 14 IS:2429(PT 2)-1970 Round steel short link chain (electric butt welded), Grade

30, Part 2 Calibrated load chain for pulley block and other lifting appliances (second revision) (withdrawn)

18 IS:2434-1973 Specification for hand-operated drums asphalt mixer (first

revision) (withdrawn) 26 IS:2795-1964 Oil pressure stoves (large) [Superseded by IS 1342] 17 IS:2845-1964 Recommendation on nominal pressure for process

equipment [withdrawn] 17 IS:2846-1964 Recommendation on nominal temperature for process

equipment [withdrawn] 16 IS:2872-1967 Low carbon steel, cylinders for the storage and

ransportation of liquefiable gases (superseded by IS 7285) 26 IS:3157-1965 Oil pressure stoves (very large), commercial designation

No. 3 (superseeded by IS:1342) 26 IS:3159-1965 Camp stoves (superseded by IS:1342) 17 IS:3223-1967 Graphical symbols for process measurement and control

functions [withdrawn)

33 IS 3257:1980 Stainless steel compartmental trays (first revision) [Superseded by IS 14756] 33 IS 3258:1980 Stainless steel serving utensils (first revision) [Superseded by IS 14756]

73

18 IS:3366-1965 Specification for pan vibrators [withdrawn] 33 IS 3411:1985 Stainless steel cooking utensils (second revision) [Superseded by IS 14756] 33 IS 3424:1985 Stainless steel table utensils (second revision) [Superseded by IS 14756] 3 IS 3621:1983 Specification for domestic refrigerators (Absorption type) [withdrawn] 14 IS:3814-1967 Metal arc welded short link, uncalibrated steel chain,

Grade 30, for lifting purposes [withdrawn] 8 IS 3819:1967 Solid forged coal cutting picks [withdrawn] 8 IS 3869(Pt 1):1966 Shortwall coal cutting machine: Part 1 General

requirement for skid mounted shortwall coal cutting machines [withdrawn]

8 IS 3869(Pt 2):1966 Shortwall coal cutting machine: Part 2 Recommendations

on selection of the basic parameters of the cutting system and the calculation of power consumption [withdrawn]

16 IS:3870-1966 Code of practice for handling gas cylinders and related

equipment intended for medical use [withdrawn] 8 IS:3970-1967 Safety detaching hooks used in mines [superseded by

IS:7587(Part 6)] 18 IS 4198:1967 Specification for emulsion spraying machine for roads

[Superseded by IS 2094(Pt 3)] 29 IS:4734-1968 Short needle bars for sewing machines for household purposes [withdrawn] 14 IS:5532(PT 1)-1984 Glossary of terms for cranes, Part 1 Type of cranes (first

revision) [withdrawn]

14 IS:5532(PT 2)-1984 Glossary of terms for cranes Part 2 Parameters (first revision) [withdrawn]

14 IS:5532(PT 3)-1984 Glossary of terms for cranes, Part 3 General concepts (first

revision) [withdrawn] 14 IS:5532(PT 4)-1984 Glossary of terms for cranes, Part 4 Components parts (first

revision) [withdrawn] 14 IS:5537-1991 Lashing chain_- Specification (first revision) [withdrawn]

74

22 IS:5538(PT 1)-1969 Measurement of airflow of compressors and exhausters:

Part 1 Nozzles [withdrawn] 22 IS:5538(PT 2)-1969 Measurement of airflow of compressors and exhausters:

Part 2 Orifice plates_ [withdrawn] 14 IS 5629:1970 Specification for mild steel forged triangular lifting eyes [withdrawn] 14 IS 5729:1970 Specification for treble-swivel assembly for ships’ union

purchase [withdrawn]

8 IS:5769-1981 Coal cutting tools, mushroom, V-faced tungsten carbide tipped (first revision) [withdrawn]

8 IS:5770-1982 Coal cutting tools, mushroom flat-faced tungsten carbide

tipped (first revision) [withdrawn] 8 IS:5771-1981 Coal cutting tools, point attack tungsten carbide tipped

(first revision) [withdrawn] 8 IS:5772-1982 Coal cutting tools, parrot-beak, flat faced tungsten

carbide tipped (first revision) [withdrawn] 8 IS:5773-1970 Coal cutting tools, straight bar V and FV-faced tungsten

carbide tipped [withdrawn] 8 IS:5774-1970 Coal cutting tools, straight bar, core breaker [withdrawn] 8 IS:5775-1970 Coal cutting tools, radial flate faced tungsten carbide

tipped [withdrawn] 8 IS:5854-1970 Coal cutting tools, radial V and FV-faced tungsten carbide

tipped (first revision) [withdrawn] 8 IS:5855-1982 Coal cutting tools, parrot-beak V and FV-faced tungsten

carbide tipped (first revision) [withdrawn] 14 IS 6168:1971 Specification for C hooks with eyes for marine purposes

[withdrawn] 16 IS:7311-1974 Seamless high carbon steel cylinders for permanent and

high pressure liquefiable gases (superseded by IS 7285) 16 IS 7680:1985 Specification for welded low carbon steel gas cylinders for ammonia (Anhydrous) gas (first revision)

Superseded by IS 3196(Part 4)]

16 IS 7681:1985 Specification for welded low carbon steel gas cylinders for chlorine gas (first revision) [Superseded by

IS 3196(Part 4)]

75

16 IS 7682:1985 Specification for welded low carbon steel gas cylinders for methyl bromide gas (first revision) [Superseded by IS 3196(Pt 4)] 28 IS/ISO 7919-1:1986 Mechanical vibration of non-reciprocating machines – Measurement on rotating shaft and evaluation: Part 1

General guidelines [Superseded by IS 14773(Pt 1):2000/ ISO 7919-1:1996]

14 IS 8610:1977 Specification for point hooks with shank capacity up to 25 tonnes – Trapezoidal section [withdrawn] 16 IS:8737(PT 1)-1979 Valve fittings for use with liquefied petroleum gas (LPG)

cylinders of more than 5 litre water capacity Part 1 Valve fittings for replacement purposes [withdrawn]

24 IS 10486:1983 Performance requirements for class A safes [Superseded by

IS 550(Pt 1), IS 550(Pt 2) and IS 550(Pt 3) 27 IS 11004(Pt 1):1992 Code of practice for installation and maintenance of

deepwell handpumps Part 1 Installation (first revision) [withdrawn]

27 IS 11004(Pt 2):1992 Code of practice for installation and maintenance of

deepwell handpumps Part 2 Maintenance (first revision) [withdrawn]

20 IS:11053-1983 Process pumps [withdrawn] 25 IS:11097(PT 1)-1984 Glossary of terms for printing machinery Part 1

Fundamental terms [withdrawn] 7 IS 11114(PT 1)-1985 Definitions of dimensions and symbols for earth-moving

machinery:Part 1 Reference system [withdrawn]

26 IS 11463:1985 Specification for blow lamp, petrol [withdrawn] 18 IS 11391:1985 General requirements for single vibrating roller, towed type

[withdrawn] 28 IS 11724:1985/ Basis for specifying the rules in evaluating the mechanical ISO 2372:1974 vibration of machines in the operation range 10 to

200 rev/s [Superseded by IS 14817(Pt 1):2000/ ISO 10816-1:1995]

28 IS 11725:1985/ Measurement and evaluation of the vibration severity of ISO 2373:1987 certain rotating electrical machinery with shaft height Between 80 and 400 mm (Superseded by IS 14817/ ISO 19816-2:1996)

21 IS:12194-1987 Dimensions for rock roller bits and blade drag bits for rock drilling equipment [withdrawn]

6 IS:12919-1990 Conveyor chains for cane sugar industry_- Specification

[withdrawn]

76

4 IS:12933(PT 4)-1990 Solar flat plate collector: Part 4 Performance requirements

and accepted criteria [withdrawn] 28 IS 13279:1992 Criteria for evaluating flexible rotor balance /ISO 5343:1983 [Superseded by IS 14918:2001/ISO 11342:1992] 28 IS 13280:1992 Mechanical balancing of flexible rotors

/ISO 5406:1980 [Superseded by IS 14918:2001/ISO 11342:1992]

77

ANNEX B

LIST OF INDIAN STANDARDS NUMBER AND VALID LICENCES COVERED UNDER CERTIFICATION

IS NO. PRODUCT NO. OF

LICENCES A Pumps

6595(Pt 1):1993 Agriculture and rural water supply pumps 62 8034:1989 Submersible pumpsets 192 8035:1999 Shallow well hand pumps 3 8472:1998 Regenerative pumps for clear cold water 77 9079:1989 Agriculture monosets 113 9301:1990 Deep well hand pumps 88 10805:1986 Foot valves 15 11501:1986 Engine monoset pumps for agriculture purpose 3 11951:1987 Pump sets for desert cooler 74 12225:1987 Jet centrifugal pump 55 13056:1991 VLOM Handpump 34 13287:1992 Extra deepwell handpumps 17 14101:1994 Deepwell handpumps – Components – Cast iron 35 14102:1994 Deepwell handpump – Components – Leaded tin bronze 39 14103:1994 Deepwell handpump – Components – Mild steel 38 14104:1994 Deepwell handpump – Components – Nitrile rubber 24 14105:1994 Deepwell handpump components stainless steel 28 14106:1994 Direct action handpumps 9 14220:1994 Openwell submersible pumpsets 22

B Gas Cylinders, Valves and Regulators

3196(Pt 1):1992 LPG cylinders 175 3196(Pt 2):1992 Low pressure liquefiable gas cylinders 13 3224:1979 Valve fittings 12 3745:1978 Valves for medical cylinders 3 7142:1995 Low pressure liquefiable gas cylinders upto 5 litres WC 4 7285:1988 High pressure cylinders 4 7312:1993 Disolved acetylene cylinders 3 7680:1985 Ammonia cylinders 1 8737:1995 Valves for LPG cylinders 52 8776:1988 Valves for small LPG cylinders 1 9121:1979 Valve checking gauges 2 9798:1995 Regulators 47 11006:1984 Flash back arrestor (Flame arrestor) 1 12300;1988 Valve fittings for small freon cylinders 1 12586:1988 Brazed low carbon steel gas cylinder 2 14899:2000 Liquefied petroleum gas (LPG) containers for 5 automotive use

78

IS NO. PRODUCT NO. OF LICENCES

C Gas Stoves and Pressure Stoves

1342:1988 Oil pressure stoves 5 2980:1986 Non-pressure stoves 28 4246:1992 LPG stoves 302 8749:1988 Bio-gas stoves 8 8808:1986 Burners 26 10109:1985 Oil pressure stove, offset burner type 3 11480:1985 Domestic grillers 3

D Refrigeration and Air Conditioning

1391(Pt 1):1992 Air Conditioners 19 1391(Pt 2):1992 Air conditioners (Split type) 3 1475(Pt 1):2001 Water coolers 6 3315:1974 Evaporated air coolers 1 10617(Pt 1):1983 High temperature application compressors 6 10617(Pt 3):1983 Low pressure application compressors 2 E Wire Ropes

1855:1977 For winding purposes 3 1856:1977 For haulage purposes 6 2141:1992 Steel wire stray strand 6 2266:1989 Steel wire ropes for general engineering purposes 17 2365:1977 Suspension ropes for lifts 2 2581:1989 Round strand galvanized steel wire ropes for 3 shipping purposes

3623:1978 Guide and rubbing ropes 3 3626:1978 Locked coil winding ropes 1 4521:1977 Wire ropes used in oil wells and oil well drilling 6 9282:1979 Wire rope for suspension bridge 3 F Mines

7577:1987 Gas testing flame safety lamps 1 7586:1975 Friction props 1 8421:1977 Hydraulic props 3

79

IS NO. PRODUCT N0. OF

LICENCES G Others

278:1978 Barbed wire for fencing 24 550(Pt 1):1991 Safes 2 1238:1985 Hurricane lantern 1 1610:2000 Household sewing machines – General requirements 2 (second revision)

1660(Pt 1):1982 Wrought aluminium utensils 35 2347:1995 Domestic pressure cookers 75 2712:1988 Gaskets and packings – Compressed asbestos 2 fibre jointings

2721:1979 Galvanized steel chain link fence fabrics 13 3099(Pt 1):1992 Microscope slips 1 3099(Pt 2):1992 Microscope slides 7 3832:1986 Hand operated chain pulley block 15 4254:1994 Jaw crusher 1 5204:1969 Research microscope 1 5244:1991 Safe deposit locker cabinet 2 5456:1985 Code of practice for testing of positive displacement 3 type air compressors and exhauster

5604:1984 Pulling and lifting machine 2 8311:1976 Instruments jewels 1 8471(Pt 4):1977 Acetylene generator 4 8598:1987 Idlers for belt conveyors 1 9890:1981 General purpose ball valves 2 11132:1985 Ammonia valves 1 11737:1996 Bag stitching machines - Specification (first revision) 1 11188(Pt 1):1991 Vault (strong room) doors – Part 1 – Specification 2 12109:1987 General requirements for light duty sewing machine 1 heads for industrial use

12933(Pt 1):1992 Solar flat plate collector 62 13095:1991 Butterfly valves 16 13152(Pt 1):1991 Solid bio-mass chulha – Specification – Part 1 9 Portable (metallic) 13429(Pt 1):2000 Solar cooker - Box type - Specification: Part 1 1 Requirements (first revision) 14769:2000 Household sewing machine head 16

---------- Total 2022

----------

80

ANNEX C

ANALYSIS ON PRINTED STANDARDS ASPECT-WISE AS ON : 1 APRIL 2003

COMM. NO

P M C T D S O TOTAL

ME 1 2 1 3 2 2 5 15 ME 3 24 1 3 2 1 4 35 ME 4 7 4 2 1 2 16 ME 6 23 22 3 5 12 65 ME 7 16 6 8 14 8 2 36 90 ME 8 45 2 3 12 5 13 80 ME 10 35 4 2 7 48 ME 14 42 10 5 4 16 77 ME 16 29 2 26 2 2 6 67 ME 17 52 12 15 11 11 7 50 158 ME 18 33 1 2 3 39 ME 20 20 1 14 3 4 42 ME 21 12 1 5 1 1 9 29 ME 22 5 3 2 1 12 23 ME 23 17 1 1 2 21 ME 24 13 3 1 17 ME 25 7 1 2 4 14 ME 26 14 1 15 ME 27 11 1 12 ME 28 2 5 5 2 1 29 44 ME 29 45 7 1 2 1 1 57 ME 30 21 4 2 3 30 ME 31 122 28 4 8 5 2 169 ME 32 8 2 6 5 21 ME 33 48 4 52

TOTAL 653 83 130 75 51 18 226 1236

GRAND TOTAL 1236 LEGENDS :- P = PRODUCTS M = METHOD OF TEST C = CODE OF PRACTICE T = TERMINOLOGY D = DIMENSIONS S = SYMBOLS

O = OTHERS

81

ANNEX E

HARMONIZATION POSITION AS ON: 01 APRIL 2003

TYPE OF HARMONIZATION NUMBER OF STANDARDS

INDIAN STANDARDS UNDER DUAL NUMBER (IDENTICAL WITH ISO STANDARDS)

182

INDIAN STANDARDS TECHNICALLY EQUIVALENT WITH ISO STANDARDS

41

INDIAN STANDARDS HARMONIZED WITH EN STANDARDS/REGULATIONS/DIRECTIVES

4

INDIAN STANDARDS HARMONIZED WITH STANDARDS OF OTHER BODIES

-

TOTAL 227

mechanical standards

Documents