medical packaging transition project cell descriptors...dupont medical packaging transition project...
TRANSCRIPT
![Page 1: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/1.jpg)
MEDICAL PACKAGING TRANSITION PROJECT CELL DESCRIPTORSMETRIC UNITS
![Page 2: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/2.jpg)
1
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
Table of ContentsMetric Units
DUPONT MEDICAL PACKAGING TRANSITION PROJECT (MPTP)
EOPouches and BagsFFSRigid Tray
GammaPouches and BagsFFSRigid Tray
Electron BeamPouches and BagsFFS
SteamPouches and BagsRigid Tray
Dry HeatRigid Tray
Low Temperature H2O2Pouches and BagsRigid Tray
![Page 3: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/3.jpg)
5
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 5
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 109P Coated
Bottom Web
Oliver-Tolas® 12 micron PET/51 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 12 hours and 0 minutes
EO exposure time per cycle: 3 hours and 0 minutes
EO concentration: 560 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 90%
Maximum pressure rate change: 51 mbar/min
![Page 4: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/4.jpg)
74
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X74
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 EU Coated
Bottom Web
12 micron PET/50 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 8 hours and 16 minutes
EO exposure time per cycle: 4 hours and 2 minutes
EO concentration: 1455 mg/L
Maximum temperature: 52°C
Maximum relative humidity: 70%
Maximum pressure rate change: 62 mbar/min
![Page 5: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/5.jpg)
3
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 3
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Header bag – EOMetric Units
Package Configuration
Header bag
Top Web
DuPont™ Tyvek® 1073B Amcor Flexibles Inc. Coated
Bottom Web
Amcor Flexibles Inc. 102 micron PE/Nylon/PE Bag Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8 hours and 30 minutes
EO exposure time per cycle: ~3- 4 hours and 0 minutes
EO concentration: 465 mg/L
Maximum temperature: 70°C
Maximum relative humidity: ~100%
Maximum pressure rate change: 138 mbar/min
![Page 6: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/6.jpg)
6
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 6
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Header bag – EOMetric Units
Package Configuration
Header bag
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 EU Coated
Bottom Web
130 micron transparent and white PE films
Sterilization
EO shallow draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): >18 hours and 10 minutes
EO exposure time per cycle: >14 hours and 0 minutes
EO concentration: >194 mg/L
Maximum temperature: 45°C
Maximum relative humidity: 95%
Maximum pressure rate change: 35 mbar/min
![Page 7: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/7.jpg)
4
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 4
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
102 micron Multi-layer Nylon/PE Coex Film
Sterilization
EO shallow draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 13 hours and 0 minutes
EO exposure time per cycle: 10 hours and 0 minutes
EO concentration: 770 mg/L
Maximum temperature: 48°C
Maximum relative humidity: 81%
Maximum pressure rate change: 49 mbar/min
![Page 8: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/8.jpg)
1
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 1
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Header bag – EOMetric Units
Package Configuration
Header bag
Top Web
DuPont™ Tyvek® 1073B Perfecseal® HCW CR27 Coated
Bottom Web
ShieLLD™ 36604-O 102 micron Nylon/PE Bag Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (including pre- and post-conditioning): 27 hours and 0 minutes
EO exposure time per cycle: 3 hours and 0 minutes
EO concentration: 600 mg/L
Maximum temperature: 66°C
Maximum relative humidity: ~100%
Maximum pressure rate change: 69 mbar/min
![Page 9: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/9.jpg)
2
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 2
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® SealScience® TPT-0270 Coated
Bottom Web
Oliver-Tolas® TPF-0524 25 micron Biax Nylon/76 micron LLDPE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 16 hours and 25 minutes
EO exposure time per cycle: 8 hours and 10 minutes
EO concentration: 518 mg/L
Maximum temperature: 56°C
Maximum relative humidity: 90%
Maximum pressure rate change: 71 mbar/min
![Page 10: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/10.jpg)
26
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 26
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® Uncoated
Bottom Web
Oliver-Tolas® TPF-0501A 12 micron PET/51 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 16 hours and 25 minutes
EO exposure time per cycle: 8 hours and 10 minutes
EO concentration: 518 mg/L
Maximum temperature: 56°C
Maximum relative humidity: 90%
Maximum pressure rate change: 71 mbar/min
![Page 11: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/11.jpg)
23
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 23
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Mangar Industries Uncoated
Bottom Web
12 micron PET/51 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 3
Total time per cycle (excluding pre- and post-conditioning): ~6 hours and 45 minutes
EO exposure time per cycle: ~5 hours and 0 minutes
EO concentration: 600 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 75%
Maximum pressure rate change: 34 mbar/min
![Page 12: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/12.jpg)
61
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X61
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Mangar Industries Uncoated
Bottom Web
25 micron Biax Nylon/51 micron PE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (including pre- and post-conditioning): >16 hours and 0 minutes
EO exposure time per cycle: >6 hours and 0 minutes
EO concentration: >500 mg/L
Maximum temperature: ~55°C
Maximum relative humidity: ~90%
Maximum pressure rate change: 34 mbar/min
![Page 13: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/13.jpg)
27
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 27
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Perfecseal® Uncoated
Bottom Web
Perfecflex® 35891-K 23 micron OPET/76 micron PE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8-12 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 640 -720 mg/L
Maximum temperature: 52°C
Maximum relative humidity: 60%
Maximum pressure rate change: 55 mbar/min
![Page 14: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/14.jpg)
25
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 25
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Beacon Converters® Uncoated
Bottom Web
Beacon Converters® A29™ 25 micron Biax Nylon/76 micron Peelable PE Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (including pre- and post-conditioning): 29-30 hours and 0 minutes
EO exposure time per cycle: 5-6 hours and 0 minutes
EO concentration: 500 mg/L
Maximum temperature: 49°C
Maximum relative humidity: 75%
Maximum pressure rate change: 34 mbar/min
![Page 15: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/15.jpg)
22
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 22
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Amcor Flexibles Inc. Uncoated
Bottom Web
Amcor Flexibles Inc. 12 micron PET/Adhesive/51 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 3
Total time per cycle (excluding pre- and post-conditioning): ~13 hours and 45 minutes
EO exposure time per cycle: 3-4 hours and 0 minutes
EO concentration: ~660 mg/L
Maximum temperature: 57°C
Maximum relative humidity: 90%
Maximum pressure rate change: 111 mbar/min
![Page 16: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/16.jpg)
24
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 24
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Mangar Industries Uncoated
Bottom Web
25 micron Nylon/ 51 micron Peelable LDPE/Allegro® T Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 13 hours and 12 minutes
EO exposure time per cycle: 4 hours and 0 minutes
EO concentration: 650 mg/L
Maximum temperature: 45°C
Maximum relative humidity: 100%
Maximum pressure rate change: 30 mbar/min
![Page 17: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/17.jpg)
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
56
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 56
DuPont™ Tyvek® 1059B – Uncoated – Header bag – EOMetric Units
Package Configuration
Kwikbreathe™ True Header Bag
Top Web
DuPont™ Tyvek® 1059B Printpack Inc. Uncoated
Bottom Web
Printpack Inc. 102 micron LLDPE-mULDPE Films
Sterilization
EO shallow draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): ~13 hours and 30 minutes
EO exposure time per cycle: 7 hours and 0 minutes
EO concentration: ~500 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 80%
Maximum pressure rate change: 68 mbar/min
![Page 18: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/18.jpg)
52
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 52
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1059B Amcor Flexibles Inc. Uncoated
Bottom Web
Amcor Flexibles Inc. 12 micron PET/58 micron LLDPE/EVA Film
Sterilization
EO deep draw
Number of cycles: 3
Total time per cycle (excluding pre- and post-conditioning): 12 hours and 0 minutes
EO exposure time per cycle: 4 hours and 30 minutes
EO concentration: 600 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 85%
Maximum pressure rate change: 80 mbar/min
![Page 19: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/19.jpg)
57
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 57
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1059B Mangar Industries Uncoated
Bottom Web
12 micron PET/51 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8-10 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 370 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 55%
Maximum pressure rate change: 51 mbar/min
![Page 20: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/20.jpg)
55
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 55
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1059B Beacon Converters® Uncoated
Bottom Web
Beacon Converters® A24™ 23 micron PET/51 micron PE Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 11 hours and 40 minutes
EO exposure time per cycle: 5 hours and 0 minutes
EO concentration: 610 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 85%
Maximum pressure rate change: 34 mbar/min
![Page 21: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/21.jpg)
53
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 53
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – Vent bag – EOMetric Units
Package Configuration
Vent bag
Top Web
DuPont™ Tyvek® 1059B Amcor Flexibles Inc. Uncoated
Bottom Web
Amcor Flexibles Inc. Durable Coex Film with Linear Tear Properties
Sterilization
EO shallow draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 13 hours and 0 minutes
EO exposure time per cycle: 6 hours and 0 minutes
EO concentration: 1000 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 85%
Maximum pressure rate change: 44 mbar/min
![Page 22: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/22.jpg)
77
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X77
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1059B Perfecseal® Uncoated
Bottom Web
Perfecflex® 35793-E 12 micron PET/38 micron PE Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (including pre- and post-conditioning): 20 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 500 mg/L
Maximum temperature: 63°C
Maximum relative humidity: 100%
Maximum pressure rate change: 45 mbar/min
![Page 23: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/23.jpg)
54
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 54
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – Pouch – EOMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1059B Beacon Converters® Uncoated
Bottom Web
Beacon Converters® A20™ 12 micron PET/51 micron LDPE Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 11 hours and 30 minutes
EO exposure time per cycle: 6 hours and 0 minutes
EO concentration: >560 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 80%
Maximum pressure rate change: 68 mbar/min
![Page 24: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/24.jpg)
10
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 10
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – EOMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® SBP2000 Coated
Bottom Web
PerfecForm® ESE 35850-O 102 micron EVA/Surlyn®/EVA Forming Film
Sterilization
EO shallow draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 10 hours and 8 minutes
EO exposure time per cycle: 4 hours and 5 minutes
EO concentration: 600 - 650 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 80%
Maximum pressure rate change: 34 mbar/min
![Page 25: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/25.jpg)
75
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X75
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS rigid blister – EOMetric Units
Package Configuration
FFS rigid blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 EU Coated
Bottom Web
500 micron PETG Forming Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 11 hours and 30 minutes
EO exposure time per cycle: 4 hours and 0 minutes
EO concentration: 600 mg/L
Maximum temperature: 46°C
Maximum relative humidity: 80%
Maximum pressure rate change: 35 mbar/min
![Page 26: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/26.jpg)
12
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 12
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – EOMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 EU Coated
Bottom Web
Multi-layer (Nylon, EvOH, others) Forming Film
Sterilization
EO shallow draw
Number of cycles: 1
Total time per cycle (including pre- and post-conditioning): 8 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 590 mg/L
Maximum temperature: 55°C
Maximum relative humidity: 80%
Maximum pressure rate change: 33 mbar/min
![Page 27: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/27.jpg)
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
11
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 11
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – EO Metric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 27HT-7 Coated
Bottom Web
152 micron Surlyn®/PE Flex Forming Film
Sterilization
EO shallow draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): ~12 hours and 30 minutes
EO exposure time per cycle: ~6 hours and 0 minutes
EO concentration: 520 mg/L
Maximum temperature: 60°C
Maximum relative humidity: ~100%
Maximum pressure rate change: ~68 mbar/min
![Page 28: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/28.jpg)
8
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 7 & 8
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – EO Metric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 10MP Coated
Bottom Web
203 micron EVA/Surlyn®/EVA Forming Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8-12 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 640-720 mg/L
Maximum temperature: 52°C
Maximum relative humidity: 60%
Maximum pressure rate change: 55 mbar/min
![Page 29: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/29.jpg)
9
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 9
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – EO Metric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 10MP Coated
Bottom Web
500 micron PET GAG Forming Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 9 hours and 45 minutes
EO exposure time per cycle: 6 hours and 0 minutes
EO concentration: 257 mg/L
Maximum temperature: 50°C
Maximum relative humidity: 70%
Maximum pressure rate change: 33 mbar/min
![Page 30: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/30.jpg)
51
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 51
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Coated – FFS flexible blister – EOMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Perfecseal® SBP2000 Coated
Bottom Web
PPC 1325-T 203 micron Forming Film
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 8 hours and 30 minutes
EO exposure time per cycle: 1 hours and 30 minutes
EO concentration: 69 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 75%
Maximum pressure rate change: 34 mbar/min
![Page 31: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/31.jpg)
50
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 50
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Coated – FFS flexible blister – EOMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Amcor Flexibles Inc. Coated
Bottom Web
PPC 1325-TLS 102 micron Forming Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8-10 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 370 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 55%
Maximum pressure rate change: 51 mbar/min
![Page 32: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/32.jpg)
49
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 49
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Coated – FFS rigid blister – EOMetric Units
Package Configuration
FFS rigid blister
Top Web
DuPont™ Tyvek® 1059B Oliver-Tolas® XHale® NP34 Coated
Bottom Web
Pacur™ 406 micron PETG Forming Film
Sterilization
EO shallow draw
Number of cycles: 3
Total time per cycle (including pre- and post-conditioning): 31 hours and 0 minutes
EO exposure time per cycle: 13 hours and 10 minutes
EO concentration: 1000 mg/L
Maximum temperature: 49°C
Maximum relative humidity: ~88%
Maximum pressure rate change: 45 mbar/min
![Page 33: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/33.jpg)
58
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 58
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – FFS flexible blister – EO Metric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Rollprint Inc. Uncoated
Bottom Web
40 micron Nylon/ 70 micron EVA Forming Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 18 hours and 30 minutes
EO exposure time per cycle: 14 hours and 42 minutes
EO concentration: 667 mg/L
Maximum temperature: 52°C
Maximum relative humidity: 70%
Maximum pressure rate change: 84 mbar/min
![Page 34: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/34.jpg)
60
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 60
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – FFS flexible blister – EOMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Perfecseal® Uncoated
Bottom Web
PerfecForm® ICE® 30655-W 152 micron Nylon Forming Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8-12 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 640 -720 mg/L
Maximum temperature: 52°C
Maximum relative humidity: 60%
Maximum pressure rate change: 55 mbar/min
![Page 35: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/35.jpg)
59
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 59
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Uncoated – FFS flexible blister – EOMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Perfecseal® Uncoated
Bottom Web
PerfecForm® ICE® 30655-EE 203 micron Nylon Forming Film
Sterilization
EO deep draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 8-10 hours and 0 minutes
EO exposure time per cycle: 2 hours and 0 minutes
EO concentration: 370 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 55%
Maximum pressure rate change: 51 mbar/min
![Page 36: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/36.jpg)
14
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
Internal Reference Only: 14
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
889 micron PETG tray
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 20 hours and 5 minutes
EO exposure time per cycle: ~5 hours and 0 minutes
EO concentration: 443-512 mg/L
Maximum temperature: 57°C
Maximum relative humidity: 90%
Maximum pressure rate change: 34 mbar/min
![Page 37: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/37.jpg)
78
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X78
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Amcor Flexibles Inc. Coated
Bottom Web
508 micron PVC tray
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 8 hours and 6 minutes
EO exposure time per cycle: ~4 hours and 30 minutes
EO concentration: 760 mg/L
Maximum temperature: 49°C
Maximum relative humidity: 75%
Maximum pressure rate change: 34 mbar/min
![Page 38: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/38.jpg)
13
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
Internal Reference Only: 13
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 18B Coated
Bottom Web
635 micron PETG tray
Sterilization
EO deep draw
Number of cycles: 3
Total time per cycle (excluding pre- and post-conditioning): 4 hours and 15 minutes
EO exposure time per cycle: 0 hours and 30 minutes
EO concentration: 720-1027 mg/L
Maximum temperature: 56°C
Maximum relative humidity: 90%
Maximum pressure rate change: 670 mbar/min
![Page 39: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/39.jpg)
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
19
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 19
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EO Metric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® SealScience® TPT-021C Coated
Bottom Web
635 micron PETG tray
Sterilization
EO shallow draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 6 hours and 45 minutes
EO exposure time per cycle: 4 hours and 0 minutes
EO concentration: 550 mg/L
Maximum temperature: 54°C
Maximum relative humidity: 75%
Maximum pressure rate change: 51 mbar/min
![Page 40: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/40.jpg)
15
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 15
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 10MP Coated
Bottom Web
600 micron PETG tray
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 6 hours and 22 minutes
EO exposure time per cycle: 4-5 hours and 0 minutes
EO concentration: 888 mg/L
Maximum temperature: 53°C
Maximum relative humidity: 80%
Maximum pressure rate change: 113 mbar/min
![Page 41: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/41.jpg)
21
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 21
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® SBP2000 EU Coated
Bottom Web
700 micron PETG tray
Sterilization
EO shallow draw
Number of cycles: 1
Total time per cycle (excluding pre- and post-conditioning): 9 hours and 30 minutes
EO exposure time per cycle: 3 hours and 0 minutes
EO concentration: 584 mg/L
Maximum temperature: 45°C
Maximum relative humidity: 75%
Maximum pressure rate change: 43 mbar/min
![Page 42: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/42.jpg)
71
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X71
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 18B Coated
Bottom Web
1000 micron PS tray
Sterilization
EO shallow draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 6-9 hours and 0 minutes
EO exposure time per cycle: 6-9 hours and 0 minutes
EO concentration: 520 mg/L
Maximum temperature: 60°C
Maximum relative humidity: 60%
Maximum pressure rate change: 100 mbar/min
![Page 43: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/43.jpg)
17
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 17
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® SBP2001 Coated
Bottom Web
762 micron HIPS tray
Sterilization
EO deep draw
Number of cycles: 3
Total time per cycle (excluding pre- and post-conditioning): 12 hours and 10 minutes
EO exposure time per cycle: 5 hours and 30 minutes
EO concentration: >661 mg/L
Maximum temperature: 57°C
Maximum relative humidity: 60%
Maximum pressure rate change: 51 mbar/min
![Page 44: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/44.jpg)
20
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 20
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 18B Coated
Bottom Web
762 micron PS tray
Sterilization
EO deep draw
Number of cycles: 1
Total time per cycle (including pre- and post-conditioning): 22 hours and 0 minutes
EO exposure time per cycle: ~2 hours and 0 minutes
EO concentration: 585 mg/L
Maximum temperature: 52°C
Maximum relative humidity: ~100%
Maximum pressure rate change: 62 mbar/min
![Page 45: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/45.jpg)
18
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 18
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® SealScience® TPT-0260 Coated
Bottom Web
700 micron PETGAG tray
Sterilization
EO shallow draw
Number of cycles: 2
Total time per cycle (excluding pre- and post-conditioning): 9 hours and 30 minutes
EO exposure time per cycle: 4 hours and 0 minutes
EO concentration: >350 mg/L
Maximum temperature: 55°C
Maximum relative humidity: 65%
Maximum pressure rate change: 40 mbar/min
![Page 46: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/46.jpg)
16
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 16
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – EOMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 18B Coated
Bottom Web
762 micron PVC tray
Sterilization
EO deep draw
Number of cycles: 3
Total time per cycle (excluding pre- and post-conditioning): ~4 hours and 30 minutes
EO exposure time per cycle: 1 hours and 15 minutes
EO concentration: >700 mg/L
Maximum temperature: 55°C
Maximum relative humidity: 85%
Maximum pressure rate change: 100 mbar/min
![Page 47: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/47.jpg)
30
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 30
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – GammaMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
PerfecForm® ICE® 30652-O 102 micron Nylon Film
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 21 kGy Maximum total dose of 40 kGy
![Page 48: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/48.jpg)
29
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 28 & 29
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – GammaMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
Perfecflex® 35791-E 12 micron PET/38 micron PE Film
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 45 kGy
![Page 49: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/49.jpg)
42
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 42
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – GammaMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Beacon Converters® Uncoated
Bottom Web
Beacon Converters® A20™ 12 micron PET/51 micron LDPE Film
Sterilization
Gamma
Number of Exposures: 2 Minimum total dose of 50 kGy Maximum total dose of 70 kGy
![Page 50: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/50.jpg)
40
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 40
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – GammaMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B PeelMaster™ Uncoated
Bottom Web
PeelMaster™ 12 micron PET/51 micron LDPE Film
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 40 kGy
![Page 51: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/51.jpg)
41
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 41
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – GammaMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Mangar Industries Uncoated
Bottom Web
25 micron Biax Nylon/51 micron PE Film
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 40 kGy
![Page 52: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/52.jpg)
33
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 33
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – GammaMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® SBP2000 Coated
Bottom Web
PerfecForm® ESE 35850-MM 254 micron EVA/Surlyn®/EVA Forming Film
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 40 kGy
![Page 53: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/53.jpg)
31
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 31
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – GammaMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® SBP2000 Coated
Bottom Web
PerfecForm® ESE 35850-O 102 micron EVA/Surlyn®/EVA Forming Film
Sterilization
Gamma
Number of Exposures: 2 Minimum total dose of 95 kGy Maximum total dose of 110 kGy
![Page 54: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/54.jpg)
32
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 32
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – GammaMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
Amcor Flexibles Inc. 305 micron EVA/Ionomer/EVA Forming Film
Sterilization
Gamma
Number of Exposures: 2 Minimum total dose of 55 kGy Maximum total dose of 70 kGy
![Page 55: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/55.jpg)
72
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X72
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Coated – FFS flexible blister – GammaMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Perfecseal® SBP2000 Coated
Bottom Web
Amcor Flexibles Inc. 254 micron Coex Metallocene Forming Film
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 40 kGy
![Page 56: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/56.jpg)
63
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X63
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 10MP Coated
Bottom Web
800 micron PETG tray
Sterilization
Gamma
Number of Exposures: 2 Minimum total dose of 54 kGy Maximum total dose of 72 kGy
![Page 57: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/57.jpg)
34
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 34
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
1270 micron PETG tray
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 45 kGy
![Page 58: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/58.jpg)
37
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 37
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Amcor Flexibles Inc. Coated
Bottom Web
1016 micron PETG tray
Sterilization
Gamma
Number of Exposures: 2 Minimum total dose of 50 kGy Maximum total dose of 80 kGy
![Page 59: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/59.jpg)
62
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X62
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Amcor Flexibles Inc. Coated
Bottom Web
508 micron PETG tray
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 21 kGy Maximum total dose of 40 kGy
![Page 60: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/60.jpg)
36
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 36
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® HCW CR27 Coated
Bottom Web
1016 micron PETG tray
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 40 kGy
![Page 61: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/61.jpg)
35
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (02/14)
Internal Reference Only: 35
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® HCW CR27 Coated
Bottom Web
1016 micron PETG tray
Sterilization
Gamma
Number of Exposures: Cumulative Minimum total dose of 100 kGy Maximum total dose of 133 kGy
![Page 62: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/62.jpg)
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
39
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 39
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 18B Coated
Bottom Web
635 micron PETG tray
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 50 kGy Maximum total dose of 80 kGy
![Page 63: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/63.jpg)
38
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 38
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – GammaMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® SealScience® TPT-0260 Coated
Bottom Web
640 micron PETG tray
Sterilization
Gamma
Number of Exposures: 1 Minimum total dose of 43 kGy Maximum total dose of 55 kGy
![Page 64: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/64.jpg)
48
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 46 & 48
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – Electron-beamMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Beacon Converters® Uncoated
Bottom Web
Beacon Converters® A23™ 23 micron PET/51 micron LDPE Film
Sterilization
Electron-beam
Number of Exposures: 1 Minimum total dose of 28 kGy Maximum total dose of 42 kGy
![Page 65: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/65.jpg)
47
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 47
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – Electron-beamMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Mangar Industries Uncoated
Bottom Web
25 micron Biax Nylon/51 micron PE Film
Sterilization
Electron-beam
Number of Exposures: 1 Minimum total dose of 25 kGy Maximum total dose of 65 kGy
![Page 66: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/66.jpg)
45
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 44 & 45
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS rigid blister – Electron-beamMetric Units
Package Configuration
FFS rigid blister
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 18B Coated
Bottom Web
1016 micron HIPS Forming Film
Sterilization
Electron-beam
Number of Exposures: 1 Minimum total dose of 26 kGy Maximum total dose of 50 kGy
![Page 67: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/67.jpg)
43
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: 43
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – FFS flexible blister – Electron-beamMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 Coated
Bottom Web
Amcor Flexibles Inc. 254 micron Ionomer/ULDPE/EVA Forming Film
Sterilization
Electron-beam
Number of Exposures: 1 Minimum total dose of 18 kGy Maximum total dose of 45 kGy
![Page 68: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/68.jpg)
73
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X73
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1059B – Coated – FFS flexible blister – Electron-beamMetric Units
Package Configuration
FFS flexible blister
Top Web
DuPont™ Tyvek® 1059B Perfecseal® SBP2000 Coated
Bottom Web
Amcor Flexibles Inc. 254 micron Coex Metallocene Forming Film
Sterilization
Electron-beam
Number of Exposures: 1 Minimum total dose of 21 kGy Maximum total dose of 51 kGy
![Page 69: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/69.jpg)
70
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X70
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Weld seal bag – SteamMetric Units
Package Configuration
Weld seal bag
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® Uncoated
Bottom Web
Oliver-Tolas® TPF-0545A 76 micron HDPE Film
Sterilization
Steam
Number of cycles: 1
Total time per cycle: 2 hours and 0 minutes
Steam exposure time per cycle: ~0 hours and 30 minutes
Maximum temperature: ~123°C
Maximum pressure: 1239 mbarA
![Page 70: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/70.jpg)
69
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X69
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Uncoated – Pouch – SteamMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® Uncoated
Bottom Web
Oliver-Tolas® TPF-0563B 12 micron PET/ 51 micron Polyolefin Peelable Sealant Film
Sterilization
Steam
Number of cycles: 1
Total time per cycle: 2 hours and 0 minutes
Steam exposure time per cycle: ~0 hours and 30 minutes
Maximum temperature: ~123°C
Maximum pressure: 1239 mbarA
![Page 71: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/71.jpg)
67
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X67
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – SteamMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® Osurance® Zone Coated
Bottom Web
508 micron PC tray
Sterilization
Steam
Number of cycles: 3
Total time per cycle: 3 hours and 0 minutes
Steam exposure time per cycle: ~0 hours and 45 minutes
Maximum temperature: ~125°C
Maximum pressure: 2339 mbarA
![Page 72: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/72.jpg)
66
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X66
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – SteamMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® XHale® 24AL Coated
Bottom Web
635 micron PC tray
Sterilization
Steam
Number of cycles: 1
Total time per cycle: 1 hours and 30 minutes
Steam exposure time per cycle: 0 hours and 30 minutes
Maximum temperature: 122°C
Maximum pressure: 2200 mbarA
![Page 73: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/73.jpg)
65
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X65
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – SteamMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® Osurance® 24AL Coated
Bottom Web
762 micron PC tray
Sterilization
Steam
Number of cycles: 3
Total time per cycle: ~2 hours and 1 minutes
Steam exposure time per cycle: ~0 hours and 46 minutes
Maximum temperature: ~123°C
Maximum pressure: 2202 mbarA
![Page 74: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/74.jpg)
68
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X68
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – Dry HeatMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Oliver-Tolas® Osurance® Zone Coated
Bottom Web
762 micron PC tray
Sterilization
Dry Heat
Number of cycles: 1
Total time per cycle: 36 hours and 0 minutes
Dry Heat exposure time per cycle: 34 hours and 0 minutes
Maximum temperature: 122°C
![Page 75: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/75.jpg)
76
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)
Internal Reference Only: X76
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Pouch – Low Temperature OxidativeMetric Units
Package Configuration
Chevron peel pouch
Top Web
DuPont™ Tyvek® 1073B Perfecseal® CR27 EU Coated
Bottom Web
12 micron PET/50 micron PE Film
Sterilization
Low temperature oxidative sterilization (H2O2)
Number of cycles: 2
Total time per cycle: ~3 hours and 10 minutes
H2O2 exposure time per cycle: ~1 hours and 2 minutes
Sterilant concentration: 59%
Maximum temperature: ~65°C
![Page 76: Medical Packaging Transition Project Cell Descriptors...DUPONT MEDICAL PACKAGING TRANSITION PROJECT DuPont Tyvek® 1073B – Coated – Pouch – EO Metric Units Package Configuration](https://reader035.vdocument.in/reader035/viewer/2022081417/5fcbe09a2761a27498655b83/html5/thumbnails/76.jpg)
Internal Reference Only: X64
DUPONT MEDICAL PACKAGING TRANSITION PROJECT
DuPont™ Tyvek® 1073B – Coated – Thermoformed tray – Low Temperature OxidativeMetric Units
Package Configuration
Thermoformed tray with coated lid
Top Web
DuPont™ Tyvek® 1073B Perfecseal® HCW CR27 Coated
Bottom Web
1016 micron PETG tray
Sterilization
Low temperature oxidative sterilization (C2H4O3)
Number of cycles: 2
Total time per cycle: ~3 hours and 15 minutes
C2H4O3 exposure time per cycle: ~2 hours and 0 minutes
Sterilant concentration: 5%
Maximum temperature: 55°C
64
www.MedicalPackaging.DuPont.comCopyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Surlyn® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. (06/13)