meridian1 x11 input output guide
DESCRIPTION
Meridian 1 X11 Input-Output GuideTRANSCRIPT
-
Copyright StatementThis Nortel documentation is protected by copyright. It may not be copied in any form or medium except pursuant to the Nortel License to Copy Documentation (License). If a License has been purchased, it will be enclosed with this copy of Nortel documentation.
-
Meridian 1
X11 So
Document NumbDocument Relea
Date: October 1
Year Publish FCC
1995, 1997All rights reserved
Printed in the Unit
Information is subjor components asand found to compradio interference against harmful ingenerates, uses ainstruction manuaresidential area is interference at the
SL-1 and MeridianTM
ed States of America
ect to change without notice. Northern Telecom reserves the right to make changes in design progress in engineering and manufacturing may warrant. This equipment has been tested ly with the limits for a Class A digital device pursuant to Part 15 of the FCC rules, and the regulations of Industry Canada. These limits are designed to provide reasonable protection terference when the equipment is operated in a commercial environment. This equipment nd can radiate radio frequency energy, and if not installed and used in accordance with the l, may cause harmful interference to radio communications. Operation of this equipment in a likely to cause harmful interference in which case the user will be required to correct the ir own expense.ftware Input/Output Guide
er: 553-3001-400se: Standard 15.00997X11 Software Input/Output Guide
1 are trademarks of Northern Telecom.
-
Page iii
Revisio
October 1997
August 1996
December 1995
July 1995
n historyStandard 15.00. This document has been up-issed to reflect updates and changes required for Release X11 23.0x.
Standard 14.00. This document has been up-issed to reflect updates and changes required for Release X11 22.0x.
Standard 13.00. This document has been up-issed to reflect updates and changes required for Release 21.1x.
Standard 12.00. This document is issued to include updates and changes required for X11 Release 21.0x. X11 Software Input/Output Guide
-
v
Conten
tsGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Format of X11 input/output NTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Communicating with the Meridian 1. . . . . . . . . . . . 9Accessing the Meridian 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10System memory and disk space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Preview of overlay content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17System Look up Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Multi-User Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Maintenance display codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Time and date of fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Numerical List of Packages. . . . . . . . . . . . . . . . . . . 23
Alphabetical List of Packages. . . . . . . . . . . . . . . . . 33
LD 01: Template audit . . . . . . . . . . . . . . . . . . . . . . . 43
LD 02: Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48How to use traffic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Print alarm and exception filter summary . . . . . . . . . . . . . . . . . . . . . . 64X11 Software Input/Output Guide
-
vi
Contents
553-3001-400
LD 10: Analog (500/2500) Telephone Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Prompts and responses by task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Standard 15.00 October 1997
LD 11: Meridian Digital Telephone Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Prompts and responses by task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
LD 12: Attendant Consoles. . . . . . . . . . . . . . . . . . . 161Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
LD 13: Digitone Receivers, Tone Detectors, Multifrequency Senders and Receivers . . . . . . . . 171Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
LD 14: Trunk Data Block. . . . . . . . . . . . . . . . . . . . . 175Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
LD 15: Customer Data Block . . . . . . . . . . . . . . . . . 195Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196Prompts and responses (Release 21 & later) . . . . . . . . . . . . . . . . . . . . 197Customer data block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197Default Customer Data Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198Data Block: AML (Application Module Link) . . . . . . . . . . . . . . . . . . 198Data Block: ANI (Automatic Number Identification) . . . . . . . . . . . . . 199Data Block: ATT (Attendant Consoles) . . . . . . . . . . . . . . . . . . . . . . . 199
-
Contents
vii
Data Block: AWU (Automatic Wake Up Data) . . . . . . . . . . . . . . . . . . 201Data Block: CAS (Centralized Attendant Service Data) . . . . . . . . . . . 202Data Block: CCS (Controlled Class of Service) . . . . . . . . . . . . . . . . . 202Data Block: CDR (Call Detail Recording . . . . . . . . . . . . . . . . . . . . . . 203Data Block: FCR (Flexible Code Restriction) . . . . . . . . . . . . . . . . . . . 204
X11 Software Input/Output Guide
Data Block: FFC (Flexible Feature Codes) . . . . . . . . . . . . . . . . . . . . . 204Data Block: FTR (Features and options) . . . . . . . . . . . . . . . . . . . . . . . 205Data Block: HSP (Hospitality Management) . . . . . . . . . . . . . . . . . . . 207Data Block: IMS (Integrated Message Service) . . . . . . . . . . . . . . . . . . 207Data Block: INT (Intercept Treatments) . . . . . . . . . . . . . . . . . . . . . . . 208Data Block: LDN (Listed Directory Numbers) . . . . . . . . . . . . . . . . . . 209Data Block: MPO (Multi-Party Operations) . . . . . . . . . . . . . . . . . . . . 210Data Block: NET (Networking) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211Data Block: NIT (Night Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214Data Block: OAS (Off Hook Alarm Security) . . . . . . . . . . . . . . . . . . . 214Data Block: PWD (Password) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215Data Block: RDR (Call Redirection) . . . . . . . . . . . . . . . . . . . . . . . . . . 216Data Block: ROA (Recorded Overflow Announcement) . . . . . . . . . . 217Data Block: TIM (Timers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218Data Block: TST (Test lines) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
LD 16: Route Data Block, Automatic Trunk Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
LD 17: Configuration Record 1 . . . . . . . . . . . . . . . . 337Prompts and responses by Gate Opener . . . . . . . . . . . . . . . . . . . . . . . . 343Gate Opener: ADAN (Action Device and Number) . . . . . . . . . . . . . . 344Gate Opener: PWD (Password) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348
-
viii
Contents
553-3001-400
Gate Opener: PARM (System Parameters) . . . . . . . . . . . . . . . . . . . . . 350Gate Opener: CEQU (Common Equipment) . . . . . . . . . . . . . . . . . . . . 353Gate Opener: OVLY (Overlay) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354Gate Opener: VAS (Value Added Server) . . . . . . . . . . . . . . . . . . . . . . 355Gate Opener: ATRN (Aries Transmission) . . . . . . . . . . . . . . . . . . . . . 356
Standard 15.00 October 1997
Gate Opener: ALARM (Alarm filters) . . . . . . . . . . . . . . . . . . . . . . . . 357ROLR / TOLR/ AOLR Offsets and Values . . . . . . . . . . . . . . . . . . . . . 358HRLR / HTLR Offsets and Values . . . . . . . . . . . . . . . . . . . . . . . . . . . 359Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
LD 18: Speed/Group Call, Pretranslation, and Hotline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422
LD 19: Code Restriction . . . . . . . . . . . . . . . . . . . . . 427Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
LD 20-22: Print Reports Guide . . . . . . . . . . . . . . . . 437
LD 20: Print Routine 1 . . . . . . . . . . . . . . . . . . . . . . . 441Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443Alphabetical list of print reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
LD 21: Print Routine 2 . . . . . . . . . . . . . . . . . . . . . . . 475Changes for Release 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476Alphabetical list of print reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
-
Contents
ix
LD 22: Print Routine 3 . . . . . . . . . . . . . . . . . . . . . . . 491
Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493Alphabetical list of print reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
X11 Software Input/Output Guide
LD 23: Automatic Call Distribution, Management Reports, Message Center . . . . . . . . . . . . . . . . . . . . 509Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510Prompts and responses by data block . . . . . . . . . . . . . . . . . . . . . . . . . . 513Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517
LD 24: Direct Inward System Access . . . . . . . . . . . 539Prompts and responses by gate opener . . . . . . . . . . . . . . . . . . . . . . . . . 540Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
LD 25: Move Data Blocks. . . . . . . . . . . . . . . . . . . . . 547Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548Move and Swap Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 549Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550
LD 26: Group Do Not Disturb . . . . . . . . . . . . . . . . . 553Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554
LD 27: ISDN Basic Rate Interface (BRI) Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 556Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 566
-
x
Contents
553-3001-400
LD 28: Route Selection for Automatic Number Identification . . . . . . . . . . . . . . . . . . . . . . . 583
Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584
Standard 15.00 October 1997
LD 29: Memory Management . . . . . . . . . . . . . . . . . 585Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587
LD 30: Network and Signaling Diagnostic . . . . . . 593Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 595Superloop commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 596Basic Rate Interface (BRI) commands . . . . . . . . . . . . . . . . . . . . . . . . 597Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 598
LD 31: Telephone and Attendant Console Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603SL-1 and M1109 Telephone test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605M2009, M2018 and M2112 Telephone test . . . . . . . . . . . . . . . . . . . . . 609M2006 and M2008 Telephone test . . . . . . . . . . . . . . . . . . . . . . . . . . . 612M2216, M2016S and M2616 Telephone test . . . . . . . . . . . . . . . . . . . 617M2317 Telephone test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621QCW-type Attendant Console test . . . . . . . . . . . . . . . . . . . . . . . . . . . . 626M1250 Console test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 632M1250 Console test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 634M1250 Console test in QMT2 mode . . . . . . . . . . . . . . . . . . . . . . . . . . 640M2250 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 646
LD 32: Network and Peripheral Equipment Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 654Superloop commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656
-
Contents
xi
ISDN BRI MISP commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657ISDN BRI SILC/UILC commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 658ISDN BRI BRSC commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 661
X11 Software Input/Output Guide
LD 33: Peripheral Equipment Diagnostic for 1.5 Mb/s RPE and Fibre Remote IPE. . . . . . . . . . . . 6911.5 Mb/s RPE diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 691Fibre Remote IPE diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 693Basic commands for 1.5 Mb/s RPE . . . . . . . . . . . . . . . . . . . . . . . . . . . 694Basic commands for Fibre Remote IPE . . . . . . . . . . . . . . . . . . . . . . . . 695Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 696
LD 34: Tone and Digit Switch and Digitone Receiver Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . 705Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 706Extended Tone Detector (XTD) commands . . . . . . . . . . . . . . . . . . . . . 707Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710
LD 35: Common Equipment Diagnostic. . . . . . . . . 717Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721
LDs 36, 41: Trunk Diagnostic . . . . . . . . . . . . . . . . . 727Basic commands (LD 36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 730Basic commands (LD 41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 731Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732
LD 37: Input/Output Diagnostic . . . . . . . . . . . . . . . 735Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 737Multipurpose Serial Data Link (MSDL) commands . . . . . . . . . . . . . . 739Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740
-
xii
Contents
553-3001-400
LD 38: Conference Circuit Diagnostic . . . . . . . . . . 743
Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 744Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 745
LD 39: Intergroup Switch and System Clock
Standard 15.00 October 1997
Generator Diagnostic . . . . . . . . . . . . . . . . . . . . . . . 749Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 751
LDs 40, 42: Call Detail Recording Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 759
LD 43: Equipment Datadump . . . . . . . . . . . . . . . . . 765Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 767Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 768
LD 44: Software Audit . . . . . . . . . . . . . . . . . . . . . . . 771
LD 45: Background Signaling and Switching Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 773Using the manual extended continuity (XCON) command . . . . . . . . . 774Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 778XCON sub-prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 779Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 784Alphabetical list of XCON sub-prompts . . . . . . . . . . . . . . . . . . . . . . . 786
LD 46: Multifrequency Sender Diagnostic for Automatic Number Identification. . . . . . . . . . . . . . 789Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 790Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791
-
Contents
xiii
LD 48: Link Diagnostic. . . . . . . . . . . . . . . . . . . . . . . 793
Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 797Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 798ACD High speed and low speed link commands . . . . . . . . . . . . . . . . . 802ACD High speed and low speed link monitor commands . . . . . . . . . . 802
X11 Software Input/Output Guide
AML commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 803AML over Ethernet (ELAN) commands . . . . . . . . . . . . . . . . . . . . . . . 803AML/CSL monitor commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 804Auxiliary Processor Link (APL) commands . . . . . . . . . . . . . . . . . . . . 806APL monitor commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 806CSL commands (X11 Release 17 and earlier) . . . . . . . . . . . . . . . . . . . 807ISDN BRI monitor commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808Multipurpose Serial Data Link (MSDL) commands . . . . . . . . . . . . . . 809Single Terminal Access (STA) commands . . . . . . . . . . . . . . . . . . . . . 809Voice Mailbox Administration (VMBA) commands . . . . . . . . . . . . . . 810Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811
LD 49: New Flexible Code Restriction and Incoming Digit Conversion . . . . . . . . . . . . . . . . . . . 845Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 847
LD 50: Call Park and Modular Telephone Relocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 851Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 852Call Park data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 852Meridian Modular Telephone ID change during relocation . . . . . . . . . 852Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 853
LD 51: Intercept Computer Update . . . . . . . . . . . . . 855Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 855Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 855
-
xiv
Contents
553-3001-400
LD 53: 2.0 Mb/s Remote Peripheral Equipment Diagnostic. . . . . . . . . . . . . . . . . . . . . . . 857
Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 860
Standard 15.00 October 1997
LD 54: Multifrequency Signaling Diagnostic . . . . 865Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869
LD 56: Flexible Tones and Cadences . . . . . . . . . . 873What are tones and cadences? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873Flexible Tone and Cadence (FTC) Tables . . . . . . . . . . . . . . . . . . . . . . 873Master Cadence Table (MCAD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874Firmware Cadence Table (FCAD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 875TDS and NT8D17 Conference/TDS/MFS cards . . . . . . . . . . . . . . . . . 877Time interval for Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 877Installing FTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 881Default Master Cadence (MCAD) tables . . . . . . . . . . . . . . . . . . . . . . . 893Master Cadence (MCAD) table for Japan . . . . . . . . . . . . . . . . . . . . . . 893Default Firmware Cadence (FCAD) tables . . . . . . . . . . . . . . . . . . . . . 894Firmware Cadence (FCAD) table for Japan . . . . . . . . . . . . . . . . . . . . 897Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 898
LD 57: Flexible Feature Codes . . . . . . . . . . . . . . . . 909Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 910Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 916
LD 58: Radio Paging . . . . . . . . . . . . . . . . . . . . . . . . 923Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 924Alphabetical List of Prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 927
-
Contents
xv
LD 60: Digital Trunk Interface and Primary Rate Interface Diagnostic . . . . . . . . . . . . . . . . . . . . 931
Basic Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933DTI/PRI commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933Clock controller commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 934
X11 Software Input/Output Guide
Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 935
LD 61: Message Waiting Lamps Reset. . . . . . . . . . 943
LD 62: 1.5 Mb/s Remote Peripheral Equipment Local End Diagnostic. . . . . . . . . . . . . . . . . . . . . . . . 945Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 946Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 947
LD 66: Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . 949
LD 73: Digital Trunk Interface . . . . . . . . . . . . . . . . . 951DDB: Digital data block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 952Prompts and responses for setting pad values . . . . . . . . . . . . . . . . . . . 953Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 957
LD 74: Digital Private Network Signaling System Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 965Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 966Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 967
LD 75: Digital Trunk Maintenance. . . . . . . . . . . . . . 971Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 972Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973
LD 77: Manual Print . . . . . . . . . . . . . . . . . . . . . . . . . 975Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 978Basic commands (Release 15 & later) . . . . . . . . . . . . . . . . . . . . . . . . . 979Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980
-
xvi
Contents
553-3001-400
LD 79: Virtual Network Service . . . . . . . . . . . . . . . 987
Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 987Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 988
LD 80: Call Trace . . . . . . . . . . . . . . . . . . . . . . . . . . . 989
Standard 15.00 October 1997
Originating and terminating information . . . . . . . . . . . . . . . . . . . . . . . 991Alphabetical list of Call Trace outputs . . . . . . . . . . . . . . . . . . . . . . . . 995Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1002
LD 81: Features and Station Print . . . . . . . . . . . . 1005Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1006Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1007
LD 82: Print Hunt Chain, Multiple Appearance Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1021Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1022Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
LD 83: Terminal Number Sort and Print . . . . . . . 1025Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1025Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026
LD 84, 85: Set Designation Entry (ODAS) . . . . . . 1027Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1027Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1027
LD 86: Electronic Switched Network 1 . . . . . . . . 1029Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1030Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1035
-
Contents
xvii
LD 87: Electronic Switched Network 2 . . . . . . . . . 1045
Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1046Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1049
LD 88: Authorization Code . . . . . . . . . . . . . . . . . . 1055
X11 Software Input/Output Guide
Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1056Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059
LD 90: Electronic Switched Network 3 . . . . . . . . . 1063Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1064Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1069
LD 92: Automatic Trunk Maintenance . . . . . . . . . 1079Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1080Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1081
LD 93: Multi-Tenant Service . . . . . . . . . . . . . . . . . 1083Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1084Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1086
LD 94: Multifrequency Signaling. . . . . . . . . . . . . . 1093Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1094Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1095Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1114
LD 95: Call Party Name Display . . . . . . . . . . . . . . 1117Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1118Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1122
-
xviii
Contents
553-3001-400
LD 96: D-channel Diagnostic . . . . . . . . . . . . . . . . 1127
D-channel commands (Release 18 & later) . . . . . . . . . . . . . . . . . . . . . 1138Multipurpose Serial Data Link (MSDL) commands . . . . . . . . . . . . . . 1140Multipurpose Serial Data Link D-channel commands . . . . . . . . . . . . . 1140Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1141
Standard 15.00 October 1997
LD 97: Configuration Record 2. . . . . . . . . . . . . . . 1159Prompts and responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1160Alphabetical list of prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1165
LD 117: Ethernet and Alarm Management . . . . . 1173New Command Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1173New Alarm Management Capability . . . . . . . . . . . . . . . . . . . . . . . . . . 1174Ethernet and Point-to-Point Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . 1179How to Configure Ethernet and Point-to-Point Protocol . . . . . . . . . . . 1180Command and Object Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183Alphabetical list of Administration commands . . . . . . . . . . . . . . . . . . 1185Alphabetical list of Maintenance Commands . . . . . . . . . . . . . . . . . . . 1191
LD 135: Core Common Equipment Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1193Adding a group to an option 51C/61C/81/81C . . . . . . . . . . . . . . . . . . 1195Removing a group from an option 51C/61C/81/81C . . . . . . . . . . . . . . 1196Basic Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1197Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1198
LD 137: Core Input/Output Diagnostic . . . . . . . . 1205Basic Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1207Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1208
-
Contents
xix
LD 143: Customer Configuration Backup and Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1217
Basic commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1218Alphabetical list of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1219X11 Software Input/Output Guide
-
Page 1 of 1220
8
Genera
lThis Northern Telecom Publication (NTP) contains all Overlay modules applicable to Meridian 1 and Meridian SL-1 switches equipped with Generic X11 (Release 23) software. Overlays are classified as being either Administration Overlays or Maintenance Overlays.
Administration modules document input and output in the Meridian prompt-response system. When the data administrator loads an Administration Overlay into memory on a Terminal, the switch outputs a prompt. The data administrator may then type a response to answer that prompt. If the response is valid, the program outputs the next prompt. If the response is invalid, an SCHxxxx message is output. To configure or change a feature, the data administrator may have to respond specifically to several prompts.
Maintenance modules document input and output in the command entry system. The Meridian command entry system may be used to:
view and print status of switch information
perform background tests
disable, enable and test system hardware (e.g., a particular phone)
When a data administrator loads a Maintenance overlay into memory on a Terminal, the administrator may then type in any command documented in that overlay. (The term overlay is synonymous with the terms load, LD and overlay program.)
A listing of Feature Packages appears twice in this NTP. An alphabetical listing (sorted by Package mnemonic) of Feature Packages can be found on page 33. A numerical listing (sorted by Package number) of Feature Packages can be found on page 23. X11 Software Input/Output Guide
-
Page 2 of 1220
General
553-3001-400
Format of X11 input/output NTP
This NTP presents both maintenance overlays and data administration overlays. Overlay programs are identified by LD XX or LD XXX (for Options 51C, 61C, 81 and 81C) where
XX or XXX is the overlay number. Maintenance overlays and data administration overlays are intermingled in this NTP, appearing in numerical order as separate modules.
Form
Standard 15.00 October 1997
at of Administration OverlaysTwo general table types appear in each administration overlay. The first table type is the Prompts and responses table. It appears at the front of each load and often follows introductory text. The second general table concludes each Administration overlay and is titled Alphabetical list of prompts.The Prompts and responses tableMany Prompts and responses tables present a complete list of an overlays prompts. When this is the case, they are simply titled Prompts and responses. Other Prompts and responses tables present only a subset of an overlays prompts. When this is the case, they are titled Prompts and responses by task, data block or feature. In some overlays, both the complete prompt list and several prompt subsets are presented. When both types of list appear in an overlay, a Table of contents box appears to help you find a particular prompt listing.
All Prompts and responses tables list prompts in the order in which they are output in each overlay. Acceptable responses or response variables are listed beside each prompt. A brief explanation of the prompt is provided in a Comment column.
Subprompts are indented with a hyphen. To have subprompts appear on the TTY, the data administrator must enter specific responses at the previous non-indented prompt. Shown below is an excerpt from a Prompts and responses table:
-
General
Page 3 of 1220
Prompt Response Comment
REQ aaa RequestTYPE aaa Type of data blockTN l s c u Terminal NumberCDEN SD, DD Card Density
X11 Software Input/Output Guide
Note that in a Prompts and responses table:a Responses are often left as generic variables.b The comment entry is typically brief and explains the prompt.
The Alphabetical list of prompts tableThis table provides a more detailed description of a response. Shown below is an excerpt from an Alphabetical list of prompts table:
Note that in an Alphabetical list of prompts table:a Responses are actual alternatives and not generic variables.
b The comment entry is often expansive and may explain the prompt, the response, or both.
c The package and release column provides the mnemonic of the package that must be equipped on the switch in order to receive this prompt. (In this example, the basic package must be equipped to view REQ.) The number following the hyphen (1 in this example) denotes the Release of software in which the package was made available.
Prompt Response Comment Pack/RelREQ Request basic-1
CHG Change existing dataEND Exit overlay program
-
Page 4 of 1220
General
553-3001-400
Format of Maintenance Overlays
Two general tables appear in each maintenance overlay. The first general table is titled
Basic commands
. It appears at the front of each load and often follows introductory text. The second general table concludes each Maintenance overlay and is titled
Alphabetical list of commands
.
Standard 15.00 October 1997
The Basic commands TableThis table presents an abbreviated listing of that overlayss entire command selection. A brief description of the command is presented beside each command.
Shown below is an excerpt from a Basic commands table:
Note that in a Basic commands table:a There are no column headings.b The list is always arranged in alphabetical order.c The corresponding comment is typically brief.
Basic commands tables present in less detail all entries in the Alphabetical list of commands table.The Alphabetical list of commands TableThis table provides a more detailed description of a given command. Shown below is an excerpt from an Alphabetical list of prompts table:
CDSP Clears the maintenance display on active CPU to ....CMIN ALL Resets minor alarm indication on attendant consoles ...CMIN c Resets minor alarm indication on attendant consoles ...
Command Description Pack/Rel
DISI loop c Disable carrier c on RPE loop when idle. The number of channels still busy on the carrier may be checked using the STAT command. The message ...
rpe-1
-
General
Page 5 of 1220
Note that in an
Alphabetical list of commands
table:
a
The description is often expansive.
b
The package and release column provides the mnemonic of the package that must be equipped on the switch in order to receive this prompt. (In this example, the rpe package must be equipped to X11 Software Input/Output Guide
enter the DISI loop c command.) The number following the hyphen (1 in this example) denotes the Release of software in which the package was made available.
-
Page 6 of 1220
General
553-3001-400
Notational conventions
1
The TTY used for data administration should be set to UPPERCASE input since the Meridian 1 does not normally accept lowercase. However, the exceptions to this rule are:
Both upper and lower case input is permitted with Options 51C,
Standard 15.00 October 1997
61C, 81 and 81C.
In LD 95, NAME may be entered in LD 95 in lowercase.
2 Lowercase variables are used in this book to represent many possible responses. The following table lists a few key variables which appear throughout this NTP:
Variable Meaning
aa Text stringaaa bbb Alphabetic or alphanumeric characters
c Customer Number (0-99)c (u) Option 11 Terminal Number (TN) Card, Unit; where unit is
optional
c u Option 11 Terminal Number (TN) Card and Unitc 0 0 u Terminal Number (TN) for Option 11. A TN consists of a
card, two filler digits, and a unit. dn Directory Number (DN)hh mm Hours (0 - 23) and Minutes (00 - 59)loop Network Loop Number (0-159)l s c (u) Terminal Number (TN), Loop, Shelf, Card, Unit; where
unit is optional
l s c u Terminal Number (TN) (loop, shelf, card, and unit number)
mmm Month (JAN - DEC) when used in a date.nnn xxx Numeric characters
xxx Numeric value (such as a DN)yy mm dd Year (00 - 99), Month (1 - 12) and Day (1 - 31)
-
General
Page 7 of 1220
3
denotes that the carriage return key is to be depressed without inputting any data. The carriage return leaves the existing value unchanged, or enters the default value if there is no existing value.
4
denotes that the space bar is to be depressed instead of
.
5
denotes a variable value, generally for a prompt response.
X11 Software Input/Output Guide
For example, is the value responded to the NIPN prompt and is a minimum value.
6 Default values are shown in parentheses
7 A range of numbers is denoted by giving the lower and upper limits of the range. For example, given the range 0 - (2) - 3, the user may manually enter 0, 1, 2, or 3, or carriage return (press ) to enter the default of 2.
8 Default values are shown in brackets in the response column where applicable. Pressing enters the default.
9 Where applicable, precede an entry with an X to delete that entry or set your entry to default value.
-
Page 8 of 1220
General
553-3001-400
Related documentation
Feature description
Feature information is provided in the
X11 Features and Services
NTP.
Operational testing
Erro
Standard 15.00 October 1997
Information and instruction regarding the testing of features and services for telephone sets and attendant (ATT) consoles is contained in the X11 Features and Services NTP.
r MessagesInformation is provided to interpret and respond to system error messages in NTP 553-3001-411.
-
Page 9 of 1220
22
Commu
nicating with the Meridian 1To communicate with the system, the following input/output devices at either on-site (local) or remote locations are required: TTY or VDT terminal as an input/output device
RS-232-C compatible printer as an output only device
Meridian SL-1 maintenance telephone set as an input only device
The input/output system can operate with terminals having the following characteristics:
Interface: RS-232-C
Code: ASCII
Speed: 110, 300, 1200, 2400, 4800, and 9600 baud
Loop Current: 20 mA X11 Software Input/Output Guide
-
Page 10 of 1220
Communicating with the Meridian 1
553-3001-400
Accessing the Meridian 1
Logging in and out
When you access the system through a system terminal, a login procedure is required (refer to Procedure 1). All system passwords are initially set as 0000, but you can change passwords through the Configuration Record (LD 17).
Loc
Standard 15.00 October 1997
See also Limited Access to Overlays in the X11 features and services NTP.Level 1 password. This general password is used in the log in sequence to provide general access to the system by service personnel. Once the system is accessed, the service personnel may then perform any necessary administration or maintenance tasks.
Level 2 password. This administrative password is known and used only by the data administration manager. The password is used to protect the system configuration record and is required when using LD 17 to change either the general or the administrative passwords.
al and remote accessInput/output terminals may operate either locally or remotely. However, data modems are required for terminals located more than 50 feet (15 meters) from the central control interface. Both local and remote terminals interface with the system through Serial Data Interface (SDI) packs.
Many devices can be installed at local and remote locations. When a system terminal is installed locally, it is connected directly to a SDI Card. When a system terminal is installed at a remote location, modems (or data sets) and a telephone line are required between the terminal and the SDI card. Figure 1 : Local and remote access to a system terminal shows typical system terminal configurations.
With X11 release 19 and later, multiple devices can simultaneously communicate with the Meridian 1 if Multi User Login is enabled. Refer to the X11 system management applications NTP for details regarding the Multi User Login Feature. Prior to Release 19, only one device at a time could interact with the Meridian 1.
-
Communicating with the Meridian 1
Page 11 of 1220
Figure 1: Local and remote access to a system terminal
HOS
Local accesssystem terminal
Meridian 1
Resy X11 Software Input/Output Guide
T mode accessA system terminal is connected through an SDI port. SDI ports are defined in LD 17 and may be configured for different types of outputs. For example, one terminal may be defined for traffic reports, another for maintenance messages. Two ports may be defined for the same output; however, prior to X11 release 17, both ports operate at the speed of the slowest port.
In X11 Release 17, it is possible to log in as a HOST. When in the HOST mode, the outputs defined for the port are only output to that port. Thus the port is no longer limited to the speed of the slowest port sharing the output types. This is useful for applications, such as Meridian Manager, which require high speed ports. Once the HOST port has logged out, the outputs to the other ports are restored.
To configure a system terminal, see the System and limited access passwords in the configuration record (LD 17). See also OVL403 and OVL404 messages, which are output to the ports affected by a HOST log in.
modemmodem
telephone line
mote accessstem terminal
553-3000
-
Page 12 of 1220
Communicating with the Meridian 1
553-3001-400
Line mode interface log in procedure
X11 release 18 introduces Line Mode interface. With Line Mode enabled (LON), the backspace can be used to edit input. The entered information (responses, for example) is not processed until the is entered. When the Line Mode is disabled (LOF), the system terminal interface operates as it did prior to X11 release 18.
Standard 15.00 October 1997
Procedure 1Logging in and out
1 Press
If the response is: OVL111 nn TTY or OVL111 nn SL-1
That means: Someone else is logged into the system. When they have logged off, press and go to Step 2.
If the response is: OVL111 nn IDLE or OVL111 nn BKGD
That means: You are ready to log into the system. Go to Step 2.
If the response is: OVL000 >
That means: This is the program identifier which indicates that you are have already logged into the system. Go to Step 4.
2 Enter: LOGI, then press
The normal response is: PASS?
If there is any other response, refer to the message text in the System Error Messages NTP.
3 Enter: Level 1 or Level 2 password and press .
If the password is correct, the system responds with the prompt: >
4 Load a program by entering: LD XX (where XX represents the overlay program number). For X11 release 18 and later, use LD 135 or LD 137 (LD xxx) to load an overlay program or LD XX D.
5 Perform tasks
6 End the program by entering: END or ****
7. Always end the log in session with: LOGO
The background routines are then loaded automatically.
-
Communicating with the Meridian 1
Page 13 of 1220
Access through the maintenance telephone
A telephone functions as a maintenance telephone when you define the class-of-service as MTA (maintenance telephone allowed) in the Multi-line Telephone Administration program (LD 11). A maintenance telephone allows you to send commands to the system, but you can only use a subset of the commands that can be entered from a system terminal.
X11 Software Input/Output Guide
You can test tones and outpulsing through the maintenance telephone. Specific commands for those tests are given in the Tone and Digit Switch and Digitone Receiver Diagnostic (LD 34).
To access the system using the maintenance telephone, see Procedure 2. To enter commands, press the keys that correspond to the letters and numbers of the command (for example, to enter LD 42 return, key in 53#42##). Table 2 shows the translation from a keyboard to a dial pad.
The following overlays (LDs) ARE accessible from a maintenance telephone: 30, 32, 33, 34, 35, 36, 37, 38, 41, 42, 43, 45, 46, 60, 61, and 62
The following overlays (LDs) ARE NOT accessible from a maintenance telephone: 31, 40, 48, 77, 80, 92, 96, 135, 137
Note: To use the maintenance telephone, the loop for that telephone must be operating.
Table 2 Translation from keyboard to dial pad
Keyboard Dial pad1
A B C 2D E F 3G H I 4J K L 5M N O 6P R S 7T U V 8W X Y 9
0Space or #
Return*
1234567890#
##*
Note: There is no equivalent for Q or Z on a dial pad.
-
Page 14 of 1220
Communicating with the Meridian 1
553-3001-400
Procedure 2Access through the maintenance telephone
1
Press the prime DN key.
2
Place the set in maintenance mode by entering:
xxxx91
Where: xxxx is the customer Special Prefix (SPRE) number. It is
Acc
Standard 15.00 October 1997
defined in the Customer Data Block and can be printed using LD 21. The SPRE number is typically 1 (which means you would enter 191).
3 Check for busy tone by entering return : ##
If there is no busy tone, go to Step 4.
If there is a busy tone, a program is active. To end an active program and access the system enter: ****
4 Load a program by entering: 53#xx##
Where: xx represents the number of the overlay program
5 Perform tasks.
6 To exit the program and return the telephone to call processing mode, enter: ****
Background routines are then loaded automatically.
essing Meridian MailOption 11 allows access to Meridian Mail Administration & Maintenance through a shared terminal on the Option 11. To access the Meridian Mail system, log in and enter: AX. To exit from Meridian Mail, press the Control key and the closed square bracket ( ] ) simultaneously.
-
Communicating with the Meridian 1
Page 15 of 1220
System memory and disk space
The following memory information is output when an administration program is loaded. This information is used to plan the addition of new features, such as speed call lists, which require memory and disk space.
NT, RT, XT, 51, 61, 71, 81 systems
ST,
X11
Elemen
ppppp1ppppp2pppppqqqqq
rrrrr
xxxxx X11 Software Input/Output Guide
MEM AVAIL: (U/P): pppppp USED: qqqqqq TOT: rrrrr
or (depending on the total amount of memory)
MEM AVAIL: (U-ppppp1 P-ppppp2): USED: qqqqqq TOT: rrrrr
21, STE, 21E systemsUDATA: ppppp1 PDATA: ppppp2
release 17 (for all systems)DISK RECS AVAIL: xxxxx
Legend:
t Definition
Amount of unprotected memory available for use (in words)Amount of protected memory available for use (in words)Total memory available for use (ppppp1 + ppppp2) (in words)Total amount of memory used (in words)Total amount of memory (in words)Floppy disk records available for storage of additional data
-
Page 16 of 1220
Communicating with the Meridian 1
553-3001-400
Low memory and disk warnings
If the amount of memory or disk space is low, the following messages are output on the RT, NT, XT, 51, 61, 71, and 81 systems.
WARNING: LOW MEMORYWARNING: LOW DISK
Standard 15.00 October 1997
WARNING: LOW MEMORY/DISK
When these messages appear, (or when the DISK RECS is less than 5, and/or the available memory is less than 1K words on the ST, STE, 21, or 21E), avoid performing further administration changes which require more memory and disk space. These changes may be lost during the next data dump.
When low memory or disk problems occur, a review of system memory is recommended. Memory may be reclaimed by removing unused features. For example, the system may have speed call lists which are no longer used and can be removed.
The low disk warning only occurs in Release 17 and later. In addition, the Speed Call List program (LD 18) has been enhanced to provide a method of computing the memory and disk requirements of new lists.
A disk record stores approximately 500 words of protected data store. The number of disk records depends on the type of floppy disk used:
3.5 inch high density floppy = maximum of 1425 records
3.5 super density = maximum of 2850 records
5.25 inch floppy = maximum of 1140 records
Note 1: Be sure the correct floppy type is defined. See prompts ADAN and FTYP in LD 17. This does not apply to the Option 81.
Note 2: These messages are not output after sysload until a data dump is done.
Note 3: These messages are not output for 21, 21E, ST, or STE systems. In these systems, avoid performing additional changes when disk records available is below 5, or memory available is below 1K.
-
Communicating with the Meridian 1
Page 17 of 1220
Preview of overlay content
System information, call information, features and services are all controlled by overlays (LDs). Data blocks are used to control this information. Listed below are some of the items accessible through the overlays.
Type
Terminal Numdata block
Customer data
Route data bloc
Configuration
X11 Software Input/Output Guide
Overlay(s) Item
ber 10, 11, 12, 14 busy lamp fieldClass of Service (CLS)feature access and requirementskey assignmentsroute assignmenttelephone features (# of key strips, data modules)telephone typetrunk accesstrunk type
block 15 attendant console informationcustomer numberfeature access codesincoming call identificationintercept optionsListed Directory Number (LDN)night serviceRecorded Announcement (RAN)
k 16 access codesCall Detail Recording (CDR) informationcode restrictionsnetwork trunk featuresroute numbertrunk route typetrunking features (timers, starting arrangements)
data block 17 input/output devicesmemory locationnetwork loop usagenumber of memory modulesnumber of network loopssystem parameters (call register, buffer sizes, traffic)
-
Page 18 of 1220
Communicating with the Meridian 1
553-3001-400
System Look up Messages
On Option 51C, 61C, 81, or 81C systems equipped with System Errors and Events Lookup package 245, it is possible to display system messages on screen. System messages must first be loaded into the switch by entering ERR . Specific system messages may then be viewed on screen if the user enters the desired system error code and . The following example shows
Multi-Use
Standard 15.00 October 1997
the data entries necessary to view error message: SCH946.
1 Login to switch
2 PASS (Enter only your password)3 ERR (The user must type ERR and press return)4 SCH946 (The user must type SCH946 and press return)
The screen will now display the error message corresponding to SCH946. In this case, that message is:
Invalid User Type
r LoginMeridian 1 Multi-User Login (MULTI_USER) (package 242) enables up to three users to log in, load, and execute overlays simultaneously. These three users are in addition to an attendant console or maintenance terminal. The multi-user capability increases the efficiency of craftpersons by enabling them to perform tasks in parallel. To facilitate this operating environment, Multi-User Login includes significant functionality:
Database conflict prevention
Additional user commands
TTY log files
TTY directed I/O
-
Communicating with the Meridian 1
Page 19 of 1220
With multiple overlays operating concurrently, there is the potential for a database conflict if two or more overlays attempt to modify the same data structure. Multi-User Login software prevents such conflicts. When a user requests that an overlay be loaded, the software determines if it could pose a potential conflict with an overlay that is already executing. If no conflict exists, the requested overlay is loaded. If a conflict does exist, the system
Cha
Use
X11 Software Input/Output Guide
issues the following message:
OVL429-OVERLAY CONFLICT
The user can try again later, or try to load a different overlay.
Multi-User Login also introduces several new user commands. With these commands, the user has the ability to:
communicate with other users
determine who is logged into the system
halt and resume background and midnight routines
initiate and terminate terminal monitoring
change printer output assignment
nges for X11 release 22 and laterPrior to X11 release 22, the number of Meridian 1 users allowed to login at the same time was three. For X11 release 22, this number is increased to five. A second change has also occurred in X11 release 22. Multiuser capability is now extended to LD 2 and LD 87.
r commandsA user can issue any of the commands listed and described in Table 3, New user commands, on page 20 at the > prompt (after login but with no overlay executing), or from within an overlay. To issue a command from within an overlay, precede the command with an exclamation point (!).
For example, to issue the WHO command from within an overlay, type:
!WHO
-
Page 20 of 1220
Communicating with the Meridian 1
553-3001-400
Table 3New user commands
Command Description
WHO
SEND xx
SEND ALL
SEND OFF
SEND ON
FORC xx
HALT
HALT OFFMON xx
MON OFFSPRT xxSPRT OFF Standard 15.00 October 1997
For more information on Multi-User Login, consult the Management Applications NTP.
Displays user name, port ID, and overlay loaded for each logged-in terminal, as well as the users MON and SPRT commands (see below).Sends a message to logged-in terminal xx. When the system responds with a SEND MSG: prompt, enter the message text yy...yy (up to 80 characters). The text of a message is considered private and therefore is not written to any log file.Sends a message to all logged-in terminals. When the system responds with a SEND MSG: prompt, enter the message text yy...yy (up to 80 characters). The text of a message is considered private and therefore is not written to any log file.Prevents messages sent by other terminals from appearing at the users terminal.
Enables messages sent by other terminals to appear at the users terminal.
Forces terminal xx to log off (the requesting user must log in with LAPW or a level 2 password).Stops background and midnight routines during a login session.Resumes halted background and midnight routines.Initiates monitoring for terminal xx (the requesting user must log in with LAPW or a level 2 password). The monitored terminal receives a message at the beginning and end of the monitored period.Turns off the monitor function.
Assigns printer output to port xx.Resets printer output assignment.
-
Communicating with the Meridian 1
Page 21 of 1220
Maintenance display codes
Maintenance displays are located on the faceplate of certain Meridian SL-1 circuit cards. A maintenance display code is a one-, two-, or three-digit alphanumeric code which can indicate the status of the system and identify faulty equipment. For a detailed definition of these codes, see the section titled HEX in the System Error Messages NTP.
Time and
X11 Software Input/Output Guide
date of faultThe system identifies the time that faults are detected. When a diagnostic message is output, a timestamp is output within 15 minutes. The format is:
TIMxxx hh:mm dd/mm/yy CPU x
Where: xxx is the system ID
The time, date, and system ID are set in LD 2.
-
Page 23 of 1220
32
Numer
Number
0123456789101112131415161718192021ical List of PackagesListed below is a comprehensive numerical list of available packages which may be equipped on your Meridian 1. For an alphabetical list of packages, Alphabetical List of Packages on page 33.
Mnemonic Name
BASIC Basic Call ProcessingOPTF Optional FeaturesCUST Multi-Customer OperationAIOD Automatic ID of Outward DialingCDR Call Detail Recording, Teletype TerminalCTY Call Detail Recording, Teletype Terminal
CLNK Call Detail Recording, Data LinkRAN Recorded AnnouncementTAD Time and Date
DNDI Do Not Disturb IndividualEES End-to-End SignalingINTR Intercept TreatmentANI Automatic Number Identification
ANIR Automatic Number Identification, Route SelectionBRTE Basic Routing
RPE1.5 1.5-Mbit Remote Peripheral EquipmentDNDG Do Not Disturb GroupMSB Make Set BusySS25 Special Service for 2500 SetsDDSP Digit DisplayODAS Office Data Administration System
DI Dial Intercom X11 Software Input/Output Guide
-
Page 24 of 1220
Numerical List of Packages
553-3001-400
22 DISA Direct Inward System Access23 CHG Charge Account for CDR24 CAB Charge Account/Authorization code 25 BAUT Basic Authorization code26272829303132333435
3637383940414243444546474849505152535455
Number Mnemonic Name Standard 15.00 October 1997
CASM Centralized Attendant Service (Main)CASR Centralized Attendant Service (Remote)BQUE Basic QueuingNTRF Network Traffic must have NWK packages.CMAC N/W Communications Management CenterMCDR Mini CDRNCOS Network Class of ServiceCPRK Call ParkSSC System Speed CallIMS Integrated Message Services. UST and UMG are part of the
IMS package.ROA Recorded Overflow AnnouncementNSIG Network SignalingMCBQ Network Call Back QueuingNSC Network Speed Call
BACD Basic Automatic Call DistributionACDB Automatic Call Distribution, Package BACDC Automatic Call Distribution, Package CLMAN Automatic Call Distribution, Load Management ReportsMUS MusicACDA Automatic Call Distribution, Package AMWC Message Waiting CenterAAB Automatic AnswerbackGRP Group call
NFCR New Flexible Code RestrictionACDD Automatic Call Distribution, Package DLNK ACDD, Auxiliary Link ProcessorFCA Forced Charge AccountSR Set RelocationAA Attendant Administration
HIST History File
-
Numerical List of Packages
Page 25 of 1220
56 AOP Attendant Overflow Position57 BARS Basic Alternate Route Selection58 NARS Network Alternate Route Selection59 CDP Coordinated Dialing Plan606162636465666770717273747576777879808182838485868788899091
Number Mnemonic Name X11 Software Input/Output Guide
PQUE Network Priority QueuingFCBQ Flexible Call Back QueuingOHQ Off-Hook QueuingNAUT Network Authorization codeSNR Stored Number RedialTDET Tone DetectorSCC Tone Detector Special Common Carrier
NXFR Network Call TransferHOT Enhanced Hot Line
DHLD Deluxe HoldLSEL Automatic Line SelectionSS5 500 Set Dial Access to Features
DRNG Distinctive RingingPBXI 1.5 Mbit Digital Trunk InterfaceDLDN Departmental Listed Directory NumberCSL Command Status LinkAMP Automated Modem PoolingOOD Optional Outpulsing DelaySCI Station Category Information
CCOS Controlled Class of ServiceRSDB Resident DebugCDRQ ACD CDR Queue RecordATM Automatic Trunk Maintenance
CSLA CSL with Alpha SignalingTENS Multi-Tenant ServiceFTDS Fast Tone and Digit SwitchDSET M2000 Digital SetsTSET M3000 Digital SetsLNR Last Number RedialDLT2 M2317 Digital Sets
-
Page 26 of 1220
Numerical List of Packages
553-3001-400
92 PXLT Pretranslation93 SUPV Supervisory Console95 CPND Calling Party Name Display96 SLST Meridian SL-1 ST Package979899100101102103104105106107108109110111113114115116117118119120121122123124125126127
Number Mnemonic Name Standard 15.00 October 1997
JPN Japan Central Office TrunksDNIS Dialed Number Identification SystemBGD Background TerminalRMS Room StatusMR PPM / Message Registration
AWU Automatic Wake UpPMSI Property Management System InterfaceOPAO Outpulsing, asterisk (*) and octothorpe (#)LLC Line Load ControlSLP Station Loop Pre-emptionMCT Malicious Call TraceICDR Internal CDRAPL Auxiliary Processor LinkTVS Trunk Verification from StationTOF Automatic Call Distribution, Timed Overflow QueuingIDC Incoming Digit Conversion
AUXS Automatic Call Distribution Package D, Auxiliary SecurityDCP Directed Call PickupPAGT Automatic Call Distribution, Priority AgentCBC Call by Call Service
CCDR Calling Line Identification in Call Detail RecordingEMUS Enhanced MusicPLDN Group Hunt/DN Access to SCLSCMP Station Camp-On
IDA Integrated Digital Access. COMDT is part of IDA PackageDPNSS Digital Private Network Signaling System 1DASS2 Digital Access Signaling System 2
FTC Flexible Tones and CadencesOPCB Operator Call Back (China #1)
BKI Attendant Break-In/Trunk Offer
-
Numerical List of Packages
Page 27 of 1220
128 MFC Multifrequency Compelled Signaling129 DTI2 2 Mbit Digital Trunk Interface131 SUPP International Supplementary Features132 TBAR Trunk Barring133134135136137138139140141143144145146147148149150151153154155157158159160161 IS162163164165
Number Mnemonic Name X11 Software Input/Output Guide
ENS Enhanced Night ServiceAFNA Attendant Forward No AnswerMFE Multifrequency Signaling for SocotelJDMI Japan Digital Multiplex InterfaceLSCM Local Steering Code ModificationDTD Dial Tone DetectionFFC Flexible Feature Codes
DCON M2250 Attendant ConsoleMPO Multi-Party OperationsICP Intercept Computer Interface
ABCD 16-Button Digitone/Multifrequency TelephoneISDN Integrated Services Digital NetworkPRA International Primary Rate Access (CO)ISL ISDN Signaling Link
NTWK Advanced ISDN Network ServicesIEC Inter-Exchange Carrier
DNXP DN Expansion (7 digit)CDRE CDR Expansion (7 digit)IAP3P ISDN AP for 3rd Party VendorsPRI2 2.0 Mb/s Primary Rate InterfaceACNT Automatic Call Distribution, Account CodeTHF Trunk Hook Flash (Centrex)FGD Feature Group DNAS Network Attendant ServiceFNP Flexible Numbering Plan
DN INTL SUP ISDN Supplementary FeaturesSAR Scheduled Access RestrictionsMINT Message InterceptLAPW Limited Access to OverlaysRPE2 2.0 Mb/s Remote Peripheral Equipment
-
Page 28 of 1220
Numerical List of Packages
553-3001-400
166 HOSP Hospitality Management167 GPRI International 1.5/2.0 Mb/s Gateway168 TMON Traffic Monitoring169 COOP Console Operations170171172173174175176178179180181182183184185186187188189190191192193195196197198200202203
Number Mnemonic Name Standard 15.00 October 1997
ARIE Aries Digital SetsJTDS Japan Tone and Digit SwitchCPGS Console Presentation GroupsECCS Enhanced Controlled Class of ServiceAAA Attendant Alternative AnsweringNMS Network Message ServicesDTOT DID To Tie (Japan only)EOVF ACD Enhanced OverflowHVS Meridian Hospitality Voice ServiceDKS Digit Key Signaling
SACP Semi-Automatic Camp-OnTFM Trunk Failure MonitorVNS Virtual Network Services
OVLP Overlap Signaling (M1 to M1 and M1 to 1TR6 CO)EDRG Executive Distinctive RingingPOVR Priority Override/Forced Camp-OnRPA Radio Paging
L1MF X08 to X11 GatewaySVCT Supervisory Console Tones
UK United KingdomSECL Series Call
ORC_RVQ Remote Virtual QueuingRCK Ringing Change KeyFAXS HiMail Fax ServerOHOL On-Hold On-LoudspeakerFRTA French Type Approval
FTCSF Boss Secretary Filtering (FFC activation)AINS Automatic Installation (Option 11 only)IPRA International Primary Rate Access (CO)XPE Meridian 1 XPE
-
Numerical List of Packages
Page 29 of 1220
204 XCT0 M1 Enhanced Conference, TDS and MFS205 XCT1 M1 Superloop Administration (LD 97)206 MLWU Multi Language Wake Up207 NACD Network Automatic Call Distribution208209210211212214215215216218219221
222223224225227228229231232233234235236240242243 A245 SY246
Number Mnemonic Name X11 Software Input/Output Guide
HSE Hospitality Screen EnhancementMLM Meridian Link Modular ServerMAID Maid IdentificationMLIO Multi Language Input/OutputVAWU VIP Automatic Wake UpEAR Enhanced ACD RoutingECT Enhanced Call TraceCCR Customer Controlled RoutingBRI Basic Rate InterfaceIVR Hold in queue for IVRMWI Message Waiting Indication Interworking with DMSCIST Commonwealth of Independent States - Three Wire Analog
TrunkMSDL Multi-purpose Serial Data LinkFCC68 FCC Compliance for DID Answer SupervisionM911 Meridian 911CWNT Call Waiting Notification (Meridian 911)
MSDL SDI MSDL Serial Data InterfaceMSDL STA Single Terminal Access
SSAU Station Specific Authorization CodesDNWK DPNSS Network ServicesPEMD Pulsed E & M (Indonesia, French Colise)BRIT ISDN BRI Trunk AccessFCDR New Format CDRBRIL BRI line applicationACRL AC15 RecallMCMO Meridian 1 Companion Option
MULTI_USER Multi-User LoginLRM_FILTER Alarm FilteringS_MSG_LKUP System Errors and Events Lookup (Option 81)
VMBA Voice Mailbox Administration
-
Page 30 of 1220
Numerical List of Packages
553-3001-400
247 CALL ID Call ID (for AML applications)248 MPH Meridian1 Packet Handler250 DPNA Direct Private Network Access251 SCDR Station Activity Records252253254255256258259261262263279283284285286 RE
288289290291292293294296297298299301302303
Number Mnemonic Name Standard 15.00 October 1997
KD3 Spanish KD3 DID/DOD interfaceARFW Attendant Remote Call ForwardPHTN Phantom TNINBD International nB+D
ADMINSET Set Based AdministrationATX Autodial Tandem Transfer
CDRX Enhanced Call Detail RecordingEURO EuroISDNSAMM Standalone Meridian MailQSIG QSIG Interface
MLMS_SPL Latin American SpanishUIGW Universal ISDN Gateways
DPNSS189I Enhanced DPNSS1 GatewayCHINA China Attendant Monitor Package
MOTE_IPE_PKGRemote IPE
DPNSS_ES DPNSS Enhanced ServicesADSP ACD Night Call Forward without Disconnect SupervisionCCB Collect Call BlockingNI2 North American National ISDN Class II Equipment
CHTL China Toll PackageTAT Trunk Anti-TromboningBTD Busy Tone DetectionMAT MAT 5.0MQA Multiple Queue AssignmentCPIO Call Processor Input/Output (Option 81)
CORENET Core Network ModuleCPP Calling Party Privacy
MOSR Mobility ServerMMO M1 Microcellular Option
-
Numerical List of Packages
Page 31 of 1220
304 ARDL Automatic Redial305 QSIG GF QSIG Generic Functional protocol306 CPRKNET Call Park Networkwide307 PAGENET Call Page Networkwide309310311313314315 O316323324325326
327328329330331332333334335
Number Mnemonic Name X11 Software Input/Output Guide
MASTER Euro ISDN Trunk - Network SideCPCI Called Party Control on Internal CallsNGCC Nortel Symposium Call CenterISPC ISDN Semi-Permanent Connection
MMSN M1 Mobility Multi-Site NetworkingPEN ALARM Open AlarmsQSIG SS QSIG Supplementary serviceETSI_SS Euro Supplementary service
NGEN Next Generation Connectivity DMWI DPNSSI Message Waiting Indication
CISMFS Commonwealth of Independent States Multifrequency Shuttle Signalling
RANBRD Recorded Announcement BroadcastMUSBRD Music Broadcast
ESA Emergency Services AccessESA_SUPP Emergency Services Access SupplementaryESA_CLMP Emergency Services Access Calling Number Mapping
CNUMB Calling Number DeliveryCNAME Calling Name Delivery
NI-2 CBC NI-2 Call By Call Service SelectionJTTC Japan Telecommunication Technology Committee
-
Page 33 of 1220
42
Alphab
Mnemonic
AAAAAAABABCDACDAACDBACDCACDDACNTACRLADMINSETADSP
AFNAAINSAIODALRM_FILTERAMPANIANIRAOPAPLetical List of PackagesListed below is a comprehensive alphabetical list of packages which may be equipped on your Meridian 1. For a numerical list of available packages, refer to the section titled Numerical List of Packages on page 23.
Feature Name Number Release
Attendant Administration 54 1Attendant Alternative Answering 174 15Automatic Answerback 47 116-Button Digitone/Multifrequency Telephone 144 14Automatic Call Distribution, Package A 45 1Automatic Call Distribution, Package B 41 1Automatic Call Distribution Package C 42 1Automatic Call Distribution Package D 50 2Automatic Call Distribution, Account Code 155 13AC15 Recall 236 20Set Based Administration 256 21ACD Night Call Forward without Disconnect Supervision
289 23
Attendant Forward No Answer 134 14Automatic Installation (Option 11 only) 200 16Automatic ID of Outward Dialing 3 1Alarm Filtering 243 19Automated Modem Pooling 78 5Automatic Number Identification 12 1ANI Route Selection 13 1Attendant Overflow Position 56 1Auxiliary Processor Link 109 10 X11 Software Input/Output Guide
-
Page 34 of 1220
Alphabetical List of Packages
553-3001-400
ARDL Automatic Redial 304 22ARFW Attendant Remote Call Forward 253 20ARIE Aries Digital Sets 170 14ATM Automatic Trunk Maintenance 84 7ATXAUXS
AWUBACDBARSBASICBAUTBGDBKIBQUEBRIBRILBRITBRTEBTDCABCALL IDCASMCASRCBCCCBCCDRCCOSCCRCDPCDRCDRECDRQCDRXCHG
Mnemonic Feature Name Number Release Standard 15.00 October 1997
Autodial Tandem Transfer 258 20Automatic Call Distribution Package D, Auxiliary Security
114 12
Automatic Wake-Up 102 10Basic Automatic Call Distribution 40 1Basic Alternate Route Selection 57 1Basic Call Processing 0 1Basic Authorization Code 25 1Background Terminal 99 10Attendant Break-In/Trunk Offer 127 1Basic Queuing 28 1Basic Rate Interface 216 18BRI line application 235 18ISDN BRI Trunk Access 233 18Basic Routing 14 1Busy Tone Detection Tone 294 21Charge Account/Authorization Code 24 1Call ID (for AML applications) 247 19Centralized Attendant Services (Main) 26 1Centralized Attendant Services (Remote) 27 1Call-by-Call Service 117 13Collect Call Blocking 290 21Calling line Identification in Call Detail Recording 118 13Controlled Class Of Service 81 7Customer Controlled Routing 215 17Coordinated Dialing Plan 59 1Call Detail Recording 4 1Call Detail Recording Expansion (7 digit) 151 13ACD CDR Queue Record 83 3Call Detail Recording Enhancement 259 20Charge Account for CDR 23 1
-
Alphabetical List of Packages
Page 35 of 1220
CHINA China Attendant Monitor Package 285 21CHTL China Toll Package 292 21CISMFS Commonwealth of Independent States
Multifrequency Shuttle Signalling326 23
CIST
CLNKCMACCNAMECNUMBCOOPCORENETCPCICPGSCPIOCPNDCPPCPRKCPRKNETCSLCSLACTYCUSTCWNTDASS2DCONDCPDDSPDHLDDIDISADKSDLDNDLT2DMWI
Mnemonic Feature Name Number Release X11 Software Input/Output Guide
Commonwealth of Independent States - Three Wire Analog Trunk
221 21
Call Detail Recording, Data Link 6 1N/W Communications Management Center 30 1Calling Name Delivery 333 23Calling Number Delivery 332 23Console Operations 169 14Core Network Module 299 21Called Party Control on Internal Calls 310 22Console Presentation Group 172 15Call Processor Input/Output (Option 81) 298 21Calling Party Name Display 95 10Calling Party Privacy 301 21Call Park 33 2Call Park Networkwide 306 22Command Status Link 77 8CSL with Alpha Signalling 85 8Call Detail Recording on Teletype Terminal 5 1Multiple-Customer Operation 2 1Call Waiting Notification (Meridian 911) 225 19Digital Access Signaling System 2 124 16M2250 Attendant Console 140 15Directed Call Pickup 115 12Digit Display 19 1Deluxe Hold 71 4Dial Intercom 21 1Direct Inward System Access 22 1Digit Key Signaling 180 1Departmental Listed Directory Number 76 5M2317 Digital Sets 91 9DPNSSI Message Waiting Indication 325 23
-
Page 36 of 1220
Alphabetical List of Packages
553-3001-400
DNDG Do-Not-Disturb, Group 16 1DNDI Do-Not-Disturb, Individual 9 1DNIS Dialed Number Identification System 98 10DNWK DPNSS Network Services 231 16DNXPDPNADPNSS189IDPNSSDPNSS_ESDRNGDSETDTI2DTDDTOTEARECCSECTEDRGEESEMUSENSEOVFESAESA_CLMP
ESA_SUPPETSI_SSEUROFAXSFCC68FCAFCBQFCDRFFCFGD
Mnemonic Feature Name Number Release Standard 15.00 October 1997
Directory Number Expansion (7 Digit) 150 13Direct Private Network Access 250 21Enhanced DPNSS1 Gateway 284 20Digital Private Network Signaling System 1 123 16DPNSS Enhanced Services 288 21Distinctive Ringing 74 4/9M2000 Digital Sets 88 72 Mbit Digital Trunk Interface 129 10Dial Tone Detector 138 10DID to Tie (Japan only) 176 16Enhanced ACD Routing 214 17Enhanced Controlled Class of Service 173 15Enhanced Call Trace 215 18Executive Distinctive Ringing 185 16End-To-End Signaling 10 1Enhanced Music 119 12Enhanced Night Service 133 20ACD Enhanced Overflow 178 15Emergency Services Access 329 23Emergency Services Access Calling Number Mapping
331 23
Emergency Services Access Supplementary 330 23Euro Supplementary service 323 22Euro ISDN 261 20HiMail Fax Server 195 18FCC Compliance for DID Answer Supervision 223 17Forced Charge Account 52 1Flexible Call Back Queuing 61 1New Format CDR 234 18Flexible Feature Codes 139 15Feature Group D 158 17
-
Alphabetical List of Packages
Page 37 of 1220
FNP Flexible Numbering Plan 160 14FRTA French Type Approval 197 15FTC Flexible Tones and Cadences 125 16FTCSF Boss Secretary Filtering (FFC activation) 198 15FTDSGRPGPRIHISTHOSPHOTHSEHVSIAP3P
ICDRICPIDAIDCIECIMS
INBDINTRIPRAISDNISDN INTL SUPISLISPCIVRJDMIJPNJTDSJTTCKD3LAPW
Mnemonic Feature Name Number Release X11 Software Input/Output Guide
Fast Tone and Digit Switch 87 7Group Call 48 1International 1.5/2.0 Mb/s Gateway 167 18History File 55 1Hospitality Management 166 16Enhanced Hot Line 70 4/10Hospitality Screen Enhancement 208 17Meridian Hospitality Voice Service 179 16Integrated Services Digital Network Application Module Link for Third Party Vendors
153 13
Internal CDR 108 10Intercept Computer Interface 143 10Integrated Digital Access 122 16Incoming DID Digit Conversion 113 12Inter-Exchange Carrier 149 13Integrated Message SystemUST and UMG are part of IMS Package.
35 2
International nB+D 255 20Intercept Treatment 11 1International Primary Rate Access 202 15Integrated Services Digital Network 145 13ISDN Supplementary Features 161 14ISDN signaling Link 147 13ISDN Semi-Permanent Connection 313 22Hold in Queue for IVR 218 18Japan Digital Multiplex Interface 136 14Japan Central Office Trunks 97 9Japan Tone and Digit Switch 171 14Japan Telecommunication Technology Committee 335 23Spanish KD3 DID/DOD interface 252 20Limited Access to Overlays 164 16
-
Page 38 of 1220
Alphabetical List of Packages
553-3001-400
L1MF X08 to X11 Gateway 188 15LLC Line Load Control 105 10LMAN Automatic Call Distribution Load Management (C2) 43 1LNK ACDD, Auxiliary Link Processor 51 2LNRLSCMLSELMAIDMASTERMATMCBQMCDRMCMOMCTMFCMFEMINTMLIOMLMMLMS_SPLMLWUMMOMMSNMPHMPOMOSRMQAMRMSBMSDLMSDL SDIMSDL STAMULTI_USERMUS
Mnemonic Feature Name Number Release Standard 15.00 October 1997
Last Number Redial 90 8Local Steering Code Modifications 137 10Automatic Line Selection 72 4Maid Identification 210 17Euro ISDN Trunk - Network Side 309 22MAT 5.0 296 22Network callback Queuing 38 2Mini CDR 31 1Meridian 1 Companion Option 240 19Malicious Call Trace 107 10Multifrequency Compelled Signaling 128 9Multifrequency Signaling for Socotel 135 10Message Intercept 163 15Multi-Language I/O Package 211 16Meridian Link Modular Server 209 16Latin American Spanish 279 20Multi-Language Wake Up 206 16M1 Microcellular Option 303 22M1 Mobility Multi-Site Networking 314 22Meridian 1 Packet Handler 248 19Multi-Party Operations 141 20Mobility Server 302 22Multiple Queue Assignment 297 21PPM/Message Registration 101 10Make Set Busy 17 1Multipurpose Serial Data Link 222 18MSDL Serial Data Interface 227 19MSDL Single Terminal Access 228 19Multi-User Login 242 19Music 44 1
-
Alphabetical List of Packages
Page 39 of 1220
MUSBRD Music Broadcast 328 23MWC Message Waiting Center 46 1MWI Message Waiting Indication Interworking with DMS 219 19M911 Meridian 911 224 19NACDNARSNASNAUTNCOSNFCRNGENNI2NI-2 CBCNMSNSCNSIGNTRFNTWKNGCCNXFRODASOHOLOHQOODOPAOOPCBOPEN ALARMOPTFORC_RVQOVLPPAGENETPAGTPBXIPEMD
Mnemonic Feature Name Number Release X11 Software Input/Output Guide
Network Automatic Call Distribution 207 15Network Alternate Route Selection 58 1Network Attendant Service 159 20Network Authorization Code 63 1Network Class Of Service 32 1New Flexible Code Restriction 49 2Next Generation Connectivity 324 22North America National ISDN Class II Equipment 291 21NI-2 Call By Call Service Selection 334 23Network Message Services 175 16Network Speed Call 39 2Network Signaling 37 2Network Traffic Measurements 29 1Advanced ISDN Network Services 148 13Nortel Symposium Call Center 311 22Network Call Transfer 67 3Office Data Administration System 20 1On Hold On Loudspeaker 196 20Off-Hook Queuing 62 1Optional Outpulsing Delay 79 5Outpulsing, asterisk (*) and octothorpe (#) 104Operator Call Back (China #1) 126 14Open Alarms 315 22Optional Features 1 1Remote Virtual Queueing 192 18Overlap Signaling (M1 to M1 and M1 to 1TR6 CO) 184 15Call Page Networkwide 307 22Automatic Call Distribution, Priority Agent 116 121.5 Mbit Digital Trunk Interface 75 5Pulsed E&M (Indonesia, French Colise) 232 18
-
Page 40 of 1220
Alphabetical List of Packages
553-3001-400
PHTN Phantom TN 254 20PLDN Group Hunt/DN Access to SCL 120 15PMSI Property Management System Interface 103 10POVR Priority Override/Forced Camp-On 186 20PQUEPRAPRI2PXLTQSIGQSIG GFQSIG SSRANRANBRDRCKREMOTE_IPE_RMSROARPARPE1.5RPE2RSDBRVQSACPSAMMSARSCCSCDRSCISCMPSECLSLPSLSTSNRSR
Mnemonic Feature Name Number Release Standard 15.00 October 1997
Network Priority Queuing 60 1International Primary Rate Access (CO) 146 132.0 Mb/s Primary Rate Interface 154 14Pretranslation 92 8Q reference signaling point Interface 263 20QSIG Generic Functional protocol 305 22QSIG Supplementary service 316 22Recorded Announcement 7 1Recorded Announcement Broadcast 327 23Ringing Change Key 193 15
PKG Remote IPE 286Room Status 100 10Recorded Overflow Announcement 36 2Radio Paging 187 151.5 Mbit Remote Peripheral Equipment 15 12.0 Mb/s Remote Peripheral Equipment 165 15Resident Debug 82 9Remote Virtual Queuing 192 18Semi-Automatic Camp-On 181 15Stand-alone Meridian Mail 262 20Scheduled Access Restrictions 162 20Tone Detector Special Common Carrier 66 7Station Activity Records 251 20Station Category Indication 80 7Station Camp-On 121 20Series Call 191 15Station Loop Preemption 106 10Meridian SL-1 ST Package 96 9Stored Number Redial 64 3Set Relocation 53 1
-
Alphabetical List of Packages
Page 41 of 1220
SSAU Station Specific Authorization Codes 229 19SS5 500 Set Dial Access to Features 73 4SS25 2500 Set Features 18 1SSC System Speed Call 34 2STASUPPSUPVSVCTSYS_MSG_LKUTADTATTBARTDETTENSTFMTHFTMONTOF
TSETTVSUIGWUKVAWUVMBAVNSXCT0XCT1XPE
Mnemonic Feature Name Number Release X11 Software Input/Output Guide
Single Term Access 228 19International Supplementary Features 131 9Supervisory Attendant Console 93 8Supervisory Console Tones 189 20
P System Errors and Events Lookup 245 19Time and Date 8 1Trunk AntiTromboning 293 21Trunk Barring 132 20Tone Detector 65 7Multiple-Tenant Service 86 7Trunk Failure Monitor 182 15Trunk Hook Flash (Centrex) 157 14Traffic Monitoring 168Automatic Call Distribution, Timed Overflow Queuing
111 10
M3000 Digital Sets 89 7Trunk Verification from Station 110 9.32Universal ISDN Gateways 283 20United Kingdom 190 16VIP Auto Wake Up 212 17Voice Mailbox Administration 246 19Virtual Network Services 183 16M1 Enhanced Conference, TDS and MFS 204 15M1 Superloop Administration (LD 97) 205 15Meridian 1 XPE 203 15
-
Page 43 of 1220
LD 01Issued: October 1997Status: StandardX11 Release: 23
46
LD 01
Us
Du
LD 01 : Template auditTemplates are used to store data which is common to many telephones. This includes items such as key functions and Class of Service. The Template Audit program saves protected memory by eliminating unused or duplicate telephone templates.
LD 1 also performs the following consistency checks.
er Count ScanAll telephones in the system are scanned to find the total number of users for a template.
If a template is found to have no users, the entire template is removed with the warning message 'NO USERS FOUND'. If a template is found to have an incorrect user count, the correct user count is written to the template, and the warning message 'USER COUNT LOW' or 'USER COUNT HIGH' is output. If the user count is accurate, the message 'USER COUNT OK' is output.
plicate Template ScanEach template is checked against every other template for possible duplication. A template is considered a duplicate of another if all of the following conditions are met:
the checksums are the same
the template lengths and the hunt offsets are the same
all template entries are the same
If a match is found, the warning message 'DUPLICATE OF xxxx' is output. A scan is then initiated to locate all users of the current template and move them to the matched template. X11 Software Input/Output Guide
-
Page 44 of 1220
Template audit
553-3001-400
LD 01
For each of these users found, the template number in the telephone data block and the user count is updated. After all of the users of the current template are moved to the matc