metacentric height laboratory
DESCRIPTION
Apparatus for Metacentric Height LaboratoryTRANSCRIPT
METACENTRIC HEIGHT
T
Equipment for Engineering Education & ResearchSOLTEQ®
MODEL: FM 43
HIS Metacentric Height (Model : FM 43) allows a thorough investigation of the factors affecting the
stability of a floating body.
EXPERIMENTAL CAPABILITIES
♦ determining the centre of gravity of the pontoon
♦ determining the metacentric height and fromth i s
the position of the metacentre for the pontoon
♦ varying the metacentric height with angle of heel
DESCRIPTION
On this item the position of the metacentre can be
varied to produce stable and unstable equilibrium. The
equipment consists of a plastic rectangular floating
pontoon, the centre of gravity of which can be varied
by an adjustable weight which slides and can be
clamped in any position on a vertical mast.
A single plumb-bob is suspended from the mast which
indicates the angle of heel on a calibrated scale. A
weight with lateral adjustment allows the degree of heel
to be varied and hence the stability of the pontoon
determined.
The equipment does not require a separate water tank
as it may be used on the Hydraulics Bench by filling
the volumentric tank.
SOLTEQ
TECHNICAL DETAILS
Max. angle of heel : ±13°
Corresponding linear dimension: ±90mm
PONTOON DIMENSIONS
Length : 350mm
Width : 200mm
Overall height : 475mm
MANUAL
The unit is supplied with Operating and Experiment
Manuals in English giving full descriptions of the unit,
summary of theory, experimental procedures and
typical experimental results.
Equipment for Engineering Education & ResearchSOLTEQ®
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
SOFTWARE & E - LEARNING
SOLDAS® - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experimental Results
SOLCAL® - Computer Aided Learning
- Multimedia Features
- Interactive
- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals
SOLTEQ®
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023
Email : [email protected] site : http//www.solution.com.my/
AGENT:
Equipment for Engineering Education & Research
BUATAN MALAYSIA