63Order toll-free 800-345-1178 rust sOlutiOns

Prevent rust, even on ready-to-weld subassemblies stored outdoors Bloxide is a weldable rust preventative that ensures x-ray quality welds. The aluminized coating acts as an oxygen barrier that protects against rust. It also forms aluminum oxide in the weld puddle which reduces porosity and pin-holing. The use of Bloxide® eliminates re-cleaning of subassemblies prepared for welding even after they have been in outside storage for several months. It is an excellent weldable primer paint.16050Z BloxideAerosol, netwt.12oz.$30.99 3ormore$30.49each16055ZP Bloxide,Quart$20.99 3ormore$20.49each51080ZP Bloxide,Gallon$69.99

Cold galvanizing prevents rust on bare steel Formulated with 93% pure zinc. Will deter rust even if scratched. Ideal for use on bare steel and inside surfaces of body panels to provide long-lasting rust protection. Not for use as a primer. 16006Z ColdGalvanizing Compound,Aerosol, 13oz.$12.99 3ormore$12.49each

High Build Primer is great for spot repairs If you’ve ever block sanded down to bare metal, here’s an easy way to touch up. SEM’s High Build Primer Surfacer provides superior adhesion with fast film build and flexibility when priming steel, aluminum, urethane, plastic and other similar surfaces. Sands easily with 320 - 400 grit. One aerosol covers about 15 square feet.50056Z SEMHighBuildPrimer$15.99

Copper Weld-thru Primer reduces metal distortionCopper Weld-Thru Primer is designed to eliminate the corrosion that forms between welded substrates. The copper provides excellent adhesion and superior conductive properties that minimize the heat zone, thereby reducing distortion and welding spatter.11281Z EastwoodCopper Weld-ThruPrimer, Aerosol$19.99 3ormore$19.49each

self-Etching Primer is for excellent adhesion

• True acid-etching formulation sticks to virtually any clean bare metal

• Enhances adhesion and durability of most non- epoxy top coats

• Available in easy-to-use aerosol cans or economical quarts. Etch and prime bare, rust-free metal in one step.

Saves time, adheres to steel, aluminum, stainless steel, and scuffed galvanized steel. Compatible with most paint or auto finishes. Bonds better to bare metals than other primers. Enhances adhesion of non-epoxy topcoats. Great base for high-build primers or spot repairs. Quarts pre-thinned for spraying. Not for use under Chassis Black.

19416Z 16Fl.ozBottle$15.9919418ZP 1GallonBottle$36.99

20558ZP 1GallonGel$38.9921721ZP 5Gallon$149.99*

Dissolve rust in one easy step with Eastwood’s Fast Etch!The Fast Etch one-step process effectively dissolves rust and leaves a protective zinc-phosphate coating on the surface. Spray, brush, wipe or dip Fast Etch onto rusted parts; then for maximum results, wipe treated parts with Eastwood’s PRE (10041Z) to neutralize the Fast Etch. Fast Etch is an excellent metal prep for powder coating and painting. One gallon will treat 200-300 square feet of metal. Also available in Gel for vertical and overhead surfaces.

*Special shipping charges may apply

16014Z Self-EtchingPrimer,Gray,Aerosol16oz. $14.99 3ormore $14.49each16009ZP Self-EtchingPrimer,Gray,Quart $19.99 3ormore $19.49each16108ZP Self-EtchingPrimer,Gray,Gallon $69.9916114Z Self-EtchingPrimerBlack,Aerosol16oz. $14.99 3ormore $14.49each16109ZP Self-EtchingPrimerBlack,Quart $19.99 3ormore $19.49each

NEW stop rust from the inside outFormulated with tough Phenolic resin that penetrates, converts and encapsulates the rust on the internal frame surface. The addition of Zinc Phosphate in the coating seals the surface and assures no future corrosion will occur. The viscosity is formulated to assure “creep” and penetration under even the heaviest of surface rust. This is a must-have coating for any frame or subframe. If not treated the exposed metal surface will continue to rust and begin to show as paint flaking, pin holes or even worse – structural frame failure. Included with each can is our 18” long “Conical Nozzle” that applies a radial spray pattern to assure complete coverage. Simply insert the nozzle into openings, bolt holes, etc. and spray. It’s that easy! 2 cans will coat a standard size frame – we recommend 3 for truck frames.12515Z EastwoodInternalFrameCoating,14oz.Aerosol$19.99

Leaves a dull-green protective coating