metal seated ball valves
TRANSCRIPT
-
7/25/2019 Metal Seated Ball Valves
1/14
YOUNG POONG
BALL
VALVES
YOUNG POONG PRECISION CORPORATION
Metal Seated Ball ValvesMetal Seated Ball Valves
-
7/25/2019 Metal Seated Ball Valves
2/142
Large Port Openings
Assure less pressure drop
and higer Cv.
Wide Materials Selection
A corrosion resistant stainless
steels, Nickel base and reactive
alloys.
Rugged Heavy-Duty Body
Limited lifetime casting guarantee.
ANSI or JIS flanges standards.
Any flanges standards availableupon requested.
Metal seated ball valves
Young Poong precision
corporation invented the
Metal seated ball valve for
the most severe and oil &
gas services where drop-
tight shutoff is an absolute
requirement.
Nearly 20 years later there
are many imitators but no
substitute for the quality
and reliability, versatility
and value you receive with
Metal seated ball valves.
High Strength Stem
Accepts most standard actuationequipment.
Manual Operation
All YPPC metal seated ball valves
are fitted with a hand wrench as
standard for manual operation.
Low Torque
Low, constant and predictable
torque even at severe service.
Tight Shutoff
Design for bubble-tight shutoffacross the pressure range.
High Flow Cavity
With minimal pressure loss
through the valve, thereby
reducing plant operating costs.
-
7/25/2019 Metal Seated Ball Valves
3/14
Various Hard-FacingAdvanced coatings available upon
request customers specification.
V-Port Hard-Faced Ball
Optional V-port hard-faced ball
provides equal percentage control for
throttling abrasive and corrosivemedia. V-port hard-faced balls may be
specified in sizes 1/2(15) through
12(300) in all of B6M Metal seated ball
valve.
Other Options
- Extended Bonnet / Stem
- Welded End
- Low Fugitive Emission Packing- Fire Safety
3
YPPC Metal seated ball
valves offer the process
industries widest range of
floating and Trunnion
mounted ball valves,
materials and configurations.
This provides customers
the flexibility to specify ball
valves to meet virtually
all their applications needs.
Mate Lapping Process
The YPPC proprietary automated and
hands mate-lapping process of the ball and
seats ensure 100% contact over entire
sealing surface.
-
7/25/2019 Metal Seated Ball Valves
4/144
Scraping Seats Standard
Ball is wiped clean each time while the valve
is operating from fully open to close.
High Temperature Application
YPPC Metal seated ball valves are guaranteed
for maximum service temperature of 400 (750),
depending on the service environment.
Wide Sealing Surfaces
Highly polished wide surfaces eliminate wear
and enhance seal integrity.
Sharp
edge
Stellite - by Deloro Inc.
Advanced Coating
The ball and seats are available to the following
hard coatings.
- ENP - Tungsten Carbide(WC)
- Nickel/Chromium - Chrome Carbide
- Nickel Based Alloy - Stellite
Available coating process are follows as
- High Velocity Oxy Fuel
- Self-Fluxing- Plasma Transfer Arc
- Fusing
We recommend that thermal spray hardened
coating is the best choice at wear and erosion
environment of severe services.
Features & Benefits
-
7/25/2019 Metal Seated Ball Valves
5/145
First Products Failed
Products Failed in
PTA Application
PTA Application
YPPC have many references with poly-silicone projects of 10-year Korean market.
Our advanced technologies of Metal Seated Ball Valves have a reputation for all customers.
We have developed and desidned specific features to ensure valve longevity in various poly-silicone application.
The integral seat design of YPPC Metal Seated Ball Valves eliminates the possibility of potential problems
in severe wear and erosion service.
Particles of Silicone in Service
Silicone powder has various sizes and shapes,
Sizes are even at small may be 0.01 mm of
diameter.
YPPC have many references with Purified Terephthalic Acid (PTA) & many other severe corrosive chemical plants
in the world wide.
Our advanced techniques of metallurgy have impeoved many customers' demands.
YPPC have developed a product line committed to solve the excessive maintenance problems that plague the
process industries.
Poly-Silicone Projects with YPPC
Solved a Problem of High Corrosive Application with YPPC
-
7/25/2019 Metal Seated Ball Valves
6/146
Outline Dimensions
B6M General Purpose Ball Valve
* Other class and sizes available
W
L
H
Size 1/2" (15) to 5" (125) Size 6" (150) to 8" (200) Size 6" (150) to 8" (200) Size 10" (250) to 12" (300)
Gear Operated (Option)
LL L
L
W
W
A
A
B
B
C
C
H1
H1
H
H
inch (mm)
1/2 (15) 4.25 (108) 5.5 (140) 2.8 (71) - 5.12 (130) - - - 2.3 (5) 2.5(5.5)
3/4 (20) 4.625(117) 6 (152) 2.88 (73) - 5.12 (130) - - - 2.5(5.5) 3.6 (8)
1 (25) 5 (127) 6.5 (165) 3.15 (80) - 6.3 (160) - - - 3.6 (8) 5.9 (13)
1-1/4(32) 5.5 (140) 7 (178) 3.23 (82) - 6.3 (160) - - - 5.4 (12) 7.7 (17)
1-1/2(40) 6.5 (165) 7.5 (190) 4.61(117) - 9.06 (230) - - - 6.8 (15) 9.5 (21)
2 (50) 7 (178) 8.5 (216) 4.8 (124) - 9.06 (230) - - - 10 (23) 15 (33)
2-1/2(65) 7.5 (190) 9.5 (241) 6.54(166) - 15.75 (400) - - - 16 (35) 25 (55)
3 (80) 8 (203) 11.125(283) 6.93(176) - 15.75 (400) - - - 20 (44) 30 (66)
4 (100) 9 (229) 12 (305) 8.11(206) - 18.11 (460) - - - 38 (84) 47 (104)
5 (125) 10 (256) 15 (381) 8.78(223) - 18.11 (460) - - - 50 (112) 60 (132)
6 (150) 15.5 (394) 15.875(403) 11.46(291) 16.62(422) 39.37(1000) 0.4 (10) 8.51(216) 8.27(210) 62 (137) 82 (181)
8 (200) 18 (457) 19.75 (502) 14.06(357) 20.36(517) 59.06(1500) 0.4 (10) 8.5 (216) 8.27(210) 131 (289) 150 (331)
10 (250) 21 (533) 22.375(568) - 22.64(575) - 0.59(15) 13.98(355) 12.21(310) 270 (595) 310 (684)
12 (300) 24 (610) 25.5 (648) - 25 (635) - 0.59(15) 13.98(355) 12.21(310) 470(1036) 540(1190)
Valve
SizeClass 150
or 10K
Class 300
or 20K
Class 150
or 10K
Class 300
or 20K
H H1 W A B C
Weight, lbs(kg)L
B6EM Extended Bonnetinch (mm)
* Larger than 4available
1/2 (15) 4.25 (108) 5.5 (140) 5.44(138) 5.12(130) 2.5(5.5) 2.8(6.2)
3/4 (20) 4.625(117) 6 (152) 5.59(142) 5.12(130) 2.8(6.2) 4.0(8.8)
1 (25) 5 (127) 6.5 (165) 6.11(155) 6.3 (160) 4.0(8.8) 6.5 (14)
1-1/2(40) 6.5 (165) 7.5 (190) 7.09(180) 9.06(230) 7.5 (17) 10 (22)
2 (50) 7 (178) 8.5 (216) 7.37(187) 9.06(230) 11 (24) 17 (37)
2-1/2(65) 7.5 (190) 9.5 (241) 9.06(230) 15.75(400) 18 (40) 28 (62)
3 (80) 8 (203) 11.125(283) 9.49(241) 15.75(400) 22 (48) 33 (73)
4 (100) 9 (229) 12 (305) 10.59(269) 18.11(460) 42 (93) 52 (115)
Valve
SizeClass 150
or 10K
Class 300
or 20K
Class 150
or 10K
Class 300
or 20K
H W
L Weight, lbs(kg)
-
7/25/2019 Metal Seated Ball Valves
7/147
B6JM Fully Jacketedinch (mm)
* Other sizes available on request
1/2 x 1-1/24.25 (108) 5.5 (140) 5.4 (137) 6.62(168) 5 (12) 7 (15)
(15 x 40)
3/4 x 1-1/24.625 (117) 6 (152) 5.52(140) 6.62(168) 8 (18) 10 (22)
(20 x 40)
1 x 25 (127) 6.5 (165) 6.11(155) 6.62(168) 12 (25) 14 (31)
(25 x 50)
1-1/2 x 2-1/26.5 (165) 7.5 (190) 7.6 (193) 9.06(230) 16 (35) 20 (44)
(40 x 65)
2 x 37 (178) 8.5 (216) 7.88(200) 9.06(230) 23 (51) 28 (63)(50 x 80)
2-1/2 x 47.5 (190) 9.5 (241) 9.02(229) 15.75(400) 36 (79) 44 (97)
(65 x 100)
3 x 58 (203) 11.125(283) 9.45(240) 15.75(400) 43 (95) 53 (117)
(80 x 125)
4 x 69 (229) 12 (305) 10.63(270) 18.11(460) 66 (146) 77 (170)
(100 x 150)
Valve
SizeClass 150
or 10K
Class 300
or 20K
Class 150
or 10K
Class 300
or 20K
H W
L Weight, lbs(kg)
B6SM Screwed / Socket Weld Endinch (mm)
1/2 (15) 3.0 (75) 5.4 (137) 5.12(130) 2.3 (5)
3/4 (20) 3.7 (93) 5.56(141) 5.12(130) 2.5 (5.5)
1 (25) 4.2 (106) 6.11(155) 6.3 (160) 3.6 (8)
1-1/2 (40) 5.1 (130) 7.6 (193) 9.06(230) 6.8 (15)
Valve
Size L H WWeight,
lbs(kg)
B21T 3-Wayinch (mm)
* Other class & sizes available on request
1/2 (15) 6.7 (170) 7.0(180) 3.7 (95) 6.62 (168) 5 (10) 5 (11)
3/4 (20) 6.7 (170) 7.5(190) 3.7 (95) 6.62 (168) 8 (17) 9 (20)
1 (25) 7.5 (190) 7.8(200) 4.61(117) 9.06 (230) 12 (25) 13 (28)
1-1/2 (40) 8.7 (220) 10.6(270) 5.71(145) 15.75 (400) 14 (30) 16 (35)
2 (50) 9.7 (246) 11.4(290) 5.71(145) 15.75 (400) 18 (40) 21 (45)
2-1/2 (65) 13.0 (330) 13.1(334) 6.85(174) 18.11 (460) 25 (55) 28 (62)
3 (80) 14.2 (360) 16.1(410) 7.01(178) 18.11 (460) 34 (75) 39 (85)
4 (100) 16.9 (430) 19.7(500) 10.63(270) 39.37(1000) 59 (130) 68 (150)
6 (150) 20.0 (510) 22.0(560) 11.58(294) 39.37(1000) 73 (160) 82 (180)
Valve
SizeClass 150
or 10K
Class 300
or 20K
Class 150
or 10K
Class 300
or 20K
H W
L Weight, lbs(kg)
W
W
L
L
L
W
H
H
H
L/2
-
7/25/2019 Metal Seated Ball Valves
8/148
Outline Dimensions
B21M Trunnion Mounted Ball Valve
inch (mm)
2 (50) 7 (178) - 8.5 (216) - 5.59(142) - - - 23 (51) 28 (63)
2-1/2(65) 7.5(190) - 9.5 (241) - 7.25(184) - - - 36 (79) 44 (97)
3 (80) 8 (203) - 11.125(283) - 7.64(194) - - - 43 (95) 53 (117)
4 (100) 9 (229) - 12 (305) - 11.78(299) - - - 66 (146) 77 (170)
6 (150) 15.5(394) 18 (457) 15.88 (403) 18 (457) 12.41(315) 0.4 (10) 8.51(216) 8.27(210) 175 (386) 205 (452)
8 (200) 18 (457) 20.5(521) 19.75 (502) 20.5(521) 13.27(337) 0.4 (10) 8.51(216) 8.27(210) 270 (595) 310 (683)
10 (250) 21 (533) 22 (559) 22.38 (568) 22 (559) 15.16(385) 0.59(15) 13.98(355) 12.21(310) 405 (893) 530 (1168)
12 (300) 24 (610) 25 (635) 25.5 (648) 25 (635) 16.3 (414) 0.59(15) 13.98(355) 12.21(310) 585(1290) 780 (1720)
Valve
Size Class 150
or 10K
Class 300
or 20K
Class 150 or 10K
RF RFWE WE
Class 300 or 20K H or H1 A B C
Weight, lbs(kg)L
RF : Raised Face Flange WE : Welding End Reduced bore available
Class : 10K / 20K, 150 / 300
Class : 40K, 600 - 1/2(15) to 1-1/2(40) (Floating Ball Design)
inch (mm)
1/2 (15) 6.5 (165) 3.55(90) 300(11.82) 14 (31)
3/4 (20) 7.5 (191) 3.55(90) 300(11.82) 16 (35)
1 (25) 8.5 (216) 3.74(95) 300(11.82) 22 (49)
1-1/2 (40) 9.5 (241) 9.74(95) 450(17.72) 26 (57)
Valve
SizeL H W
Weight,
lbs(kg)
Size 2(50) to 4(100) Size 6(150) to 12(300)
W
W
B
A
H
H
H1
C
L
L
L
-
7/25/2019 Metal Seated Ball Valves
9/149
inch (mm)Class : 40K, 600 - 2(50) to 12(300)
2 (50) 11.5 (292) 4.14(105) 5.28(134)23.63(600)
34 (34)
2-1/2 (65) 13 (330) 4.53(115) 6.89(175) 44 (97)
3 (80) 14 (356) 5.12(130) 7.48(190)29.53(750)
0.4 (10) 8.51(216) 8.27(210)66 (145)
4 (100) 17 (432) 6.46(164) 8.6 (220) 120 (265)
6 (150) 22 (559) - 12.05(306) -0.59(15) 13.98(355) 12.21(310)
275 (606)
8 (200) 26 (660) - 14.41(366) - 510 (1124)
10 (250) 31 (787) - 15.16(385) -0.71(18) 15.24(387) 19.69(500)
800 (1764)
12 (300) 33 (838) - 17.25(438) - 1110 (2447)
Valve
SizeH
L
(RF & WE)H1 W A B C
Weight,
lbs(kg)
RF : Raised Face Flange WE : Welding End Reduced bore available
inch (mm)Class : 900 - 2to 12
2 (50) 14.49(368) 4.93(125) - 13.78(350) - - - 34 (75)
2-1/2 (65) 16.5 (419) 5.52(140) -22.05(560)
- - - 59 (130)
3 (80) 15 (381) 6.11(155) - - - - 85 (187)
4 (100) 18 (457) 7.68(195) - 35.83(910) - - - 180 (397)
6 (150) 24 (610) - 9.45(240) -3.93(100) 10.36(263) 23.63(600)
390 (895)
8 (200) 28.9 (734) - 10.83(275) - 640 (110)
10 (250) 33 (838) - 8.67(220) -5 (127) 11.7 (297) 27.56(700)
960 (2116)
12 (300) 38 (965) - 14.37(365) - 1330 (2932)
Valve
SizeH
L
(RF & WE)H1 W A B C
Weight,
lbs(kg)
RF : Raised Face Flange WE : Welding End Reduced bore available
inch (mm)Class : 1500 - 2to 12
2 (50) 14.49(368) 4.93(125) - 13.78(350) - - - 59 (130)
2-1/2 (65) 16.5 (419) 5.52(140) -22.05(560)
- - - 76 (168)
3 (80) 18.51(470) 6.11(155) - - - - 109 (240)
4 (100) 21.5 (546) 7.68(195) - 35.83(910) - - - 141 (310)
6 (150) 27.76(705) - 9.45 (240) -3.93(100) 10.36(263) 23.63(600)
460(1014 )
8 (200) 32.76(832) - 10.83 (275) - 760 (1676)
10 (250) 39 (991) - 8.67 (220) -5 (127) 11.7 (297) 27.56(700)
1150 (2535)
12 (300) 44.5(1130) - 14.37 (365) - 1590(3505 )
Valve
SizeH
L
(RF & WE)H1 W A B C
Weight,
lbs(kg)
RF : Raised Face Flange WE : Welding End Reduced bore available
Size 2" (50) to 4" (100) Size 2" (50) to 4" (100) Size 6" (150) to 12" (300)
Gear Operated (Option)
W
B
B
A
A
H H
1H1
C
C
LL
L
-
7/25/2019 Metal Seated Ball Valves
10/1410
Outline Dimensions
Class : 10K/ 20K, 150/ 300inch (mm)
B21PM Pocket-Less
2 (50) 11.5 (292) 4.1 (105) 5.28(134)23.63(600)
1.34 (34) 51 (23) 63 (28)
2-1/2(65) 13 (330) 4.5 (115) 6.89(175)0.4 (10) 8.51(216) 8.27(210)
1.74 (44) 79 (36) 97 (44)
3 (80) 14 (356) 5.1 (130) 7.48(190)29.53(750)
2.6 (66) 95 (3) 117 (53)
4 (100) 17 (432) 6.5 (164) 8.67(220) 4.73 (120) 146 (66) 170 (77)
6 (150) 22 (559) -12 (305)
-0.59(15) 13.98(355) 12.21(310)
10.83 (275) 386 (175) 452 (205)
8 (200) 26 (660) - - 20 (510) 595 (270) 683 (310)
10 (250) 31 (787) - 15.16(385) - 31.5 (800) 893 (405) 1168 (530)
12 (300) 33 (838) - 17.25(438) - 0.71(18) 15.24(387) 19.69(500) 43.7 (1110) 1290 (585) 1720 (780)
14 (350) 35 (889) - 17.92(455) - 44.5 (1130) 1775 (805) 2403 (1090)
16 (400) 39 (991) - 18.59(472) - 0.79(20) 21.26(540) 27.56(700) 62.21(1580) 2359 (1070) 3263 (1480)
Valve
SizeClass 150
or 10K
Class 300
or 20K
Class 150
or 10K
Class 300
or 20K
H H1 W A B C
Weight, lbs(kg)L
Class : 40K, 600inch (mm)
1/2 (15) 6.5(165)3.55 (90)
- - - - 13 (29)
3/4 (20) 7.5(191) - 11.82(300) - - - 15 (33)
1 (25) 8.5(216)3.74 (95)
- - - - 21 (46)
1-1/2 (40) 9.5(241) - 17.72(450) - - - 23 (51)
2 (50) 11.5(292) 4.14(105) 5.28(134)23.63(600)
34 (75)
2-1/2 (65) 13 (330) 4.53(115) 6.89(175)0.4 (10) 8.51(216) 8.27(210)
44 (97)
3 (80) 14 (356) 5.12(130) 7.48(190) 29.53(750) 66 (145)4 (100) 17 (432) 6.46(164) 8.67(220) 120 (265)
6 (150) 22 (559) - 12 (305) -0.59(15) 13.98(355) 12.21(310)
275 (606 )
8 (200) 26 (660) - 14.41(366) - 510(1124)
Valve
SizeHL H1 W A B C
Weight,
lbs(kg)
RF : Raised Face Flange WE : Welding End Reduced bore available
ANSI 150#, 300#, JIS 10K, 20K ANSI 150#, 300#, JIS 10K, 20K ANSI 600#, JIS 40K ANSI 600#, JIS 40K
Size 1/2" (15) to 5" (125) Size 6" (150) to 16" (400) Size 1/2" (15) to 4" (100) Size 2" (50) to 8" (200)Gear Operated(Option)
W
A
A
B
B
W
L
L L L
HH1
H1
C
C
H
-
7/25/2019 Metal Seated Ball Valves
11/1411
1 Fire Safe : Graphite 2 See Hard-Facing Specification
How to Specify
Bill of Material
Example : 6B6MFARA1BJED3 : 6B6M Series Metal Seated Ball Valve, Full Bore, 150#, RF Flanged End, WCB Body, CF8M/TCC Ball,316L/ST6 Metal Seat, Actuator Operator
( ) JIS materials designation * Other materials available on request
Specify
You
Size
B6M
B6SM
B6EM
B6JM
B21M
B21PM
F = Full
Bore
R = Red
Uced
Bore
1 = 10K
2 = 20K
3 = 40K
4 = 63K
A = 150
B = 300
C = 600
D = 900
E = 1500
F = 2500
R =RF
FLG.
F = FF
FLG.
T = RTJ
W = Butt
Weld
A1 = WCB(SCPH2)
A2 = LCB(SCPL1)
A4 = CF8(SCS13A)
A5 = CF3(SCS19A)
A6 = CF8M(SCS14A)
A7 = CF3M(SCS16A)
A8 = CD4McuN
AF = A105/ENP
AR-LF2/ENP
S1 = A105
S4 = F304
S6 = F316
Etc...
AF = A105/ENP
AG = A105/TCC
AJ = A105/Ni-Cr
AW = CF8/ENP
AX = CF8/TCC
AZ = CF8/Ni-Cr
BB = CF8M/ENP
BC = CF8M/TCC
BE = CF8M/Ni-Cr
JB = 304L/STELLITE
JE = 316L/STELLITE
Etc...
JA = 304L/ST1
JB = 304L/ST6
JC = 304L/ST6/TCC
JD = 316L/ST1
JE = 316L/ST6
JF = 316L/ST6/TCC
JR = 304L/Ni-Cr
JS = 316L/Ni-Cr
Etc...
0 = Bare
Stem
1 = Wrench
2 = Gear
3 = Actuator
Z = Fire Safe
V = Vacuum
Service
N = NACE
T = Extended
Stem
L = VOC
Packing
Etc
Size SymbolBore
Design
Pressure
Class
End
Connection Body Ball Seat Retainer Metal Seat
Operator Option
Material *
CF8/ENPC CF8/ENP CF8M/ENP CF3/ENP CF8M/ENP CF3M/ENP
304 316 304L 316 316L
304L / Stellite 316L / Stellite 304L / Stellite 316L / Stellite
Body/Closure
Body Gasket
Hard-Faced Ball2
Stem
Metal Seat 2
Packing
Stud Bolt
Nut
Material
PartsWCB
WCB
B7 B8
2H 8
CF3 CF8M
CF8MCF3
CF3M
CF3M
CF8
CF8
PTFE 1
PTFE 1
Hard-Facing Specification
Electro-less Nickel
Phosphorus (ENP)
Tungsten Carbide(WC)
80Ni-20Cr
Stellite 1, 3, 6, 12
Type
Materials *Hardness
Working
TemperatureProcess Service
Hv 700 350 Plating
HRc 60~70 400 HVOF *3
HRc 50~60 800 PTA *4, Fusing
HRc 40~55 400 PTA, Welding
For food industry, gas, sea water, coal mines, offshore, caustic solution.
For liquid or gas services with high presence of solids. Not suitable whensmallpresence of caustic soda is expected.
For abrasive media such as coke, particle and Catalyst handling.
For liquid or gas services with small presence of solids.Suitable when small presence of caustic soda is expected.Best on dry gas or steam services.
3 HVOF : Thermal Spray (High Velocity Oxy Fuel) * Other materials available on request4 PTA : Thermal Spray (Plasma Transfer Arc)
-
7/25/2019 Metal Seated Ball Valves
12/1412
10(DN250) & 12(DN300) Class 300
Side-entry.(Indonesia)
26(DN650) Class 150
Installed and operating at oil field
in the Middle east.(UAE)
12(DN300)
Class 1500
Forged body for gas
application.(Mexico)
6(DN150) Class 150
Automated ball valve on
chemical pipe line.
6(DN150) Class 1500
Forged body before paint.(Korea)
Automated small size ball valves
before shipment.
16(DN400) Class 300
After fully automation.(Taiwan)
20(DN500) & 24(DN600) Class 150 fully automated
valves on final Inspection for oil application.(Indonesia)
8(DN200) Class 1500
Duplex casting body.(Korea)
Products & Service
-
7/25/2019 Metal Seated Ball Valves
13/1413
Applicable StandardsYPPC ball valves are generally in accordance with API, ANSI,JIS and BS requirements.
The following list contains the most important applicable standards for ball valves.
YPPC valves may be designed, manufactured and tested in accordance with other international standards on request.
American Petroleum Institute
American Society of Mechanical Engineers
Japanese Industrial Standard
British Standard
Manufactures Standardization Society
National Association of Corrosion Engineers
Instrument Society of America
International Organization for Standardization
Spec. 6A Specification for Wellhead and Christmas Tree Equipment
Spec. 6D Specification for Pipeline Valves
Spec. 6FA Specification for Fire Test for Valves
Std. 598 Valve Inspection and Test
Std. 607 Fire Test for Soft-seated Quarter-turn Valves
B 16.5 Pipe Flanges and Flanged FittingsB 16.10 Face to face and End to end Dimensions of Ferrous Valves
B 16.34 Valves-flanged and Butt-welding end
B 2001 Nominal Size and Bore of Valves
B 2002 Face to face and End to end Dimensions of Valves
B 2003 General Rules for Inspection of Valves
B 2210 Flanged and Fittings
BS 5159 Specification for Cast Iron and Carbon Steel Ball Valve for General Purposes
BS 5351 Steel Ball Valves for the Petroleum, Petrochemical and Allied Industries
BS 6755 Part 1 Specification for Production Pressure Testing Requirements
BS 6755 Part 2 Specification for Fire-Testing Requirements
SP 6 Standard Finishes for Contact faces of Pipe Flanges and Connecting-end Flange of Valves and Fittings
SP 25 Standard Marking System for Valves, Fittings, Flanges and Unions
SP 44 Steel Pipe Line Flanges
SP 61 Pressure Testing of Steel Valves
SP 72 Ball Valves with Flanged or Butt-welding ends for General Service
MR 0175 Sulfide Stress Cracking Resistant Metallic Material for Oilfield Equipment
5208 Industrial Valves -Pressure Testing of Valves
5211 Part 1 Part-Turn Valve Actuator Attachment - Part 1 : Flange Dimensions
5211 Part 2 Part-Turn Valve Actuator Attachment - Part 2 : Flange and Coupling Performance Characteristics
5211 Part 3 Part-Turn Valve Actuator Attachment - Part 3 : Dimensions of Driving Components
10423 Petroleum and natural gas industries?Drilling and production equipment?Wellhead and Christmas
tree Equipment
S93.00.01 Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves
-
7/25/2019 Metal Seated Ball Valves
14/14
Bulletin YB-12-D (AUG. 2009) This catalogue is subject to change without notice.
YPPC provides
single-source responsibility
for your valve automation needs.
From the Cradle
To the Grave for Valves
YOUNG POONG PRECISION CORPORATION
Automated valve assembled withFlowserve-Automax actuation packages.
Head Office : 142, Nonhyun-dong, Kangnam-gu,
Seoul, Korea
TEL (02) 519-3508, 3524, 3526, 3528FAX (02) 519-3525
Banwol : 491-3, Moknae-dong, Danwon-gu,
Plant Ansan-shi, Gyeonggy-do, Korea
TEL (031) 491-5581 - 4
FAX (031) 492-6496
Cast : 363-158, Kyongseo-dong, Seo-gu,
Foundry Incheon, Korea
TEL (032) 561-5581
FAX (032) 561-5580
Ulsan Office : 1040, Whasan-ri, Onsan-eup, Uljoo-gun,
Ulsan, Korea
TEL (052) 239-9963FAX (052) 238-2338
Yeosoo : 205-1, Hak-dong, Yeosoo-shi, Jeonnam,
Office Korea
TEL (061) 682-5033, 5004
FAX (061) 682-3132
URL : http://www.yppc.co.kr
E-mail (sales) [email protected]
Distributed by: