9/7/2014 Method Statement For On Site Installation Of Diffusers, Grilles And Louvres To HVAC Ducting Systems

http://www.methodstatementhq.com/method-statement-for-on-site-installation-of-diffusers-grilles-and-louvres-to-hvac-ducting-systems.html 1/4

H o m e Disclaimer Project HSE Plan Construction Method Statements

Method Statement Template Inspection Checklists Request A Method Statement

Project Execution Plan Customer Support Download Method Statements

Blocking air dampershoogenboomvalves.com

Solution designed for 100% shut off Contact us for more information!

Method Statement Free Download

RSS

You are here: Home » Method Statements » Const ruct ion Method Statements » HVAC Method Statements » Duct

Works » Method Statements » Const ruct ion Method Statements » HVAC Method Statements » Method Statement

For On Site Installat ion Of Diffusers, Grilles And Louvres To HVAC Duct ing Systems

Method Statement For On Site Installation Of Diffusers, Grilles And Louvres

To HVAC Ducting Systems

Tweet

Construction Supervisors to ensure that all ductwork

and insulation have been inspected and signed off

by the client prior to the installation of diffusers, grilles

and louvres to the HVAC ducting system. It is also

responsibility of site engineer and supervisor to ensure

plenum or terminal box openings are compatible for

diffusers, grilles and louvres (D.G.L.’s) to be installed.

Installation Method Statement for

Diffusers, Drills & Louvers

Volume control dampers will be installed for all inlets

and outlets including concealed adjustment devices, which should be accessible without

dismantling any plant, these will be shown on the contractors as built drawings and in general will be

incorporated within the component that will have all internal sections painted matt-black. Prior to

installation it will be ensured that Plenums are correctly acoustically lined.

During unpacking of DGL’s care will be taken to avoid damage to the finished face of DGL’s and

if any damage is noticed the supervisor will inform engineer to get the replacement.

March 5, 2013 | webmaster

SPECIAL RECENT POSTS

Installation of Marble and Granite

Tiles on floor, stairs, walls and

counters

April 4th, 2014

This m ethod statem ent covers the

detailed procedure to be followed for

Supply & Installation of [...]

Method Of Statement For Installation

of wires and cables - Wiring

March 29th, 2014

Below is the list of equipm ent / Tools

required for installation of wires and cables,

which cab be u[...]

Method Statement For Installation &

Testing of SMATV System

March 21st, 2014

Below are the steps or m ethod statem ent

for installation & testing of SMATV System in

a project.[...]

Sanitary Ware Installation Method

Statement

March 20th, 2014

Installation of sanitary ware can be done

step wise as per m entioned procedure or

m ethod statem ent b[...]

Plastering Works Method Statement

March 20th, 2014

Below are the equipm ent involved in

Plaster works that should be arranged

before starting the plaste[...]

Method Statement for Internal Painting

Works

March 20th, 2014

Below is the procedure for doing the

painting works for internal painting. This safe

work m ethod sta[...]

Chiller installation method statement

March 17th, 2014

Below is a standard operating procedure

which can be used a a m ethod statem ent

for installation of c[...]

How To Do Installation of Suspended

False Ceilings

March 14th, 2014

0 Email Share

9/7/2014 Method Statement For On Site Installation Of Diffusers, Grilles And Louvres To HVAC Ducting Systems

http://www.methodstatementhq.com/method-statement-for-on-site-installation-of-diffusers-grilles-and-louvres-to-hvac-ducting-systems.html 2/4

« Installation Of Noise and Vibration Control Equipm ents/Isolators

Cable Tray Inspection & Testing Form at / Sam ple Form »

All diffusers, grilles and louvres will be checked against the relevant schedules by the construction

supervisor prior to the commencement of installation, ensuring they are of the correct type and size

as reviewed by the client/consultant. All material must be pre approved by consultant.

Install subframe in the duct opening as manufacturers instructions and ensure that D.G.L.’s shall be

installed correctly as per the direction of air flow.

Prepare D.G.L.’s by installing sealing material to the internal side of the mating flange, carefully

locate D.G.L.’s into subframe and locate locking screws and tighten until correct level and the

alignment is attached.

After final alignment, carefully tighten the D.G.L.’s until an airtightness is achieved.

Before leaving each installation of a D.G.L. ensure it is undamaged, clean and screws are tight.

Ensure that all D.G.L.’s are left in closed position and protection shall be provided until handover.

The supervisor in charge and the QC Engineer will continuously monitor the activities to ensure that

all D.G.L.’s and components indicated on the approved construction drawings have been installed

and that the completed installation is in accordance with the contract requirements and

manufacturers recommendations.

LIKE US ON FACEBOOK

Filed under Duct Works, HVAC Method Statements | Tags: &, diffusers, grilles and louvres, HVAC Method Statements,

louvers

Floor Heating Systemalibaba.com

Find Quality Products from Verified

Suppliers. Get a Live Quote Now!

Equipm ent Required For Installation of

Suspended Ceilings Leveling Instrum ents

Line dory C[...]

Transformer testing & commissioning

method statement

March 14th, 2014

Below is a standard m ethod statem ent

which can be used as learning purpose and

to prepare further pr[...]

METHOD STATEMENT FOR

INSTALLATION, TESTING AND

COMMISSIONING OF UPS

March 14th, 2014

1.0. PURPOSE: The purpose of this m ethod

statem ent defines the procedure to be

followed for Insta[...]

CATEGORIES

BMS

Cem ent & Clinker Testing

Civil Engineering

Civil Method Statem ents

Concrete Testing

Construction Method Statem ents

Drainage Pipes Installation

Duct Works

Electrical

Electrical Method Statem ents

Fire Suppression System

Health & Safety

HVAC Checklists

HVAC Maintenance

HVAC Method Statem ents

ISO 9001

Method Statem ent Tem plate

Method Statem ents

Piping Method Statem ents

Piping Works

Plum bing Method Statem ents

Pressure Testing

Project HSE Plan

Pum p Installation

Quality Assurance

Quality Managem ent

Risk

Risk Assessm ent

Risk Managem ent

Sam ple Form s & Form ats

Tem plates

Testing & Com m issioning

Water Supply Piping

Welding Risk

What Is Hazard?

What Is Risk?

Working At Height

9/7/2014 Method Statement For On Site Installation Of Diffusers, Grilles And Louvres To HVAC Ducting Systems

http://www.methodstatementhq.com/method-statement-for-on-site-installation-of-diffusers-grilles-and-louvres-to-hvac-ducting-systems.html 3/4

Comments are closed. TAGS

& Access Control System Accessories AC Duct ing

Method Statement ac duct installat ion ACMaintenance Acoust ic Lining blank performablank proforma bms system BMS TestingProcedure Building Management SystemBuilding Management System BMS control

measures Electrical Method Statement forhazard hvac HVAC Method Statements

installat ion Installation of GI Conduits &

Accessories method Method

Of Statement Method

Statement met hod

st at ement for Inst allat ion Met hodSt at ement Templat e MST MST For BMS

of pipe flushing pressure pumps risk RiskAssessment safe work method sample

check list sample checksheet Sample

Format Electrical statement swms

template test Testing & CommissioningTesting & Commissioning MethodStatement water

DOWNLOAD METHOD STATEMENTS

Download BMS Installation Method Statem ent

Download Chilled Water Pipes Installation &

Testing Method Statem ent

Download Method Statem ent For INSTALLATION

HYDRO TESTING & FLUSHING OF FIRE FIGHTING

PIPING SYSTEM INCLUDING SPRINKLERS

Download Method Statem ent For CENTRAL

BATTERY SYSTEM INSTALLATION

Download Method Statem ent For Fire Alarm

System

Download Method Statem ent For Flushing Of

Chilled Water Piping

Download Method Statem ent For Installation Of

Packaged Units

Download Method Statem ent For Installation Of

Split Units & Risk Assessm ent

Download Method Statem ent For Installation Of

Transform ers

Download Project HSE Plan With All Form s

Hom e

Privacy Policy

Disclaim er

Hom e

Privacy Policy

9/7/2014 Method Statement For On Site Installation Of Diffusers, Grilles And Louvres To HVAC Ducting Systems

http://www.methodstatementhq.com/method-statement-for-on-site-installation-of-diffusers-grilles-and-louvres-to-hvac-ducting-systems.html 4/4

Disclaim er

Copyright © 2014 Method Statement Free Download | zBorder Theme powered by WordPress