CATALOG DECEMBER 2021

MECHANICAL MEASUREMENT

CATALOG

MECHANICAL MEASUREMENTBORE GAUGES

CARBIDE DIAL BORE GAUGE Movable touch and extension rods with carbide tips (Fig. A) Wooden case Supplied without dialindicator

CODE 42110 42120 42130 42140 PRICE € 257,40 € 293,15 € 308,88 € 475,48

DIAL BORE GAUGE Hardened steel tips Wooden case Supplied without dial indicator

CODE 42010 42020 42030 42032 42040 PRICE € 205,21 € 225,23 € 244,53 € 277,42 € 414,70

SPECIAL DIAL BORE GAUGE L shaped for brass Adjustable rod with scale Supplied without dial indicator In case

CODE 42204 42205 PRICE € 1.102,53 € 1.251,25

CATALOG

MECHANICAL MEASUREMENTCALIPERS

ABS VERNIER CALIPER ABS vernier caliper Without parallax, vernier and graduation on the same plane

CODE 10722 PRICE € 2,07

BUTTON SLIDE GAUGE Special gauge for buttons (English) In brass Scale: mm (A) mm 0-95 (B) mm 20

CODE 10801 PRICE € 10,09

CALIBRATED TAPE COIL Width 13 mm, length 5 m In case

CODE 35129 35134 35135 35136 35140 PRICE € 15,27 € 13,44 € 13,44 € 13,44 € 13,12

CODE 35142 35143 PRICE € 13,12 € 16,48

CALIPER In aluminium Engraved scale Fiber-resin fl at surfaced folding jaws (A) cm 90 (B) cm 10

CODE 10455 PRICE € 48,98

CATALOG

MECHANICAL MEASUREMENTCALIPERS

CALIPER In aluminium Engraved scale Fiber-resin fixed surfaced folding jaws (A) mm 0-155 (B) mm 40

CODE 10460 PRICE € 42,90

CALIPER FOR TREES Aluminium body Double graduation Wear resistant

CODE 10903 10904 10905 10906 PRICE € 174,46 € 195,20 € 215,22 € 235,95

CARBON FIBER DIGITAL CALIPER Carbon Fiber Digital Caliper Giant numbers Capacity 150 x 0,1 mm (A) mm 0-150 (B) mm 40Supplied in blister

CODE 10745 PRICE € 15,13

CONICAL GAUGE FOR BORES Steel Graduated conical stem Diameter direct reading (A) Ø 0 ÷ 15

CODE 35078 PRICE € 18,41

CATALOG

MECHANICAL MEASUREMENTCALIPERS

DEPTH BASE ATTACHMENT Base for vernier calipers For depth measurements through the rod gauge

CODE 10105 PRICE € 14,23

DEPTH VERNIER CALIPER Hardened Stainless steel Chromium plated scale Locking screw Wooden case

CODE 10151 10153 PRICE € 39,33 € 52,56

DIAL CALIPER Hardened stainless steel 4 ways of measurement Hidden rack Resettable dial in any positionLocking screw

CODE 10023 10024 PRICE € 40,40 € 57,56

DIAL THICKNESS GAUGE FOR TYRES Needle rod Frictioned movement Dial colored areas to indicate the threadwear status (A) mm0-19 (B) mm 45 Similar leather case

CODE 43140 PRICE € 75,08

CATALOG

MECHANICAL MEASUREMENTCALIPERS

DIGITAL CALIPER BIG DIGITS (11 MM) Hardened stainless steel Big fi gures display (11 mm) 4 ways of measurement 3 buttons: -on/off (manual) - reset for comparative measures ± - mm/inch conversion Accuracy 0.02 mmRepeatability 0.01 mm Printing outlet

CODE 10002 10008 10009 PRICE € 36,83 € 48,98 € 78,65

DIGITAL CALIPER BIG DIGITS (11 MM) Hardened stainless steel Big figures display (11 mm) 4 ways of measurement 3 buttons: -on/off (manual) - reset for comparative measures ± - mm/inch conversion Accuracy 0.02 mmRepeatability 0.01 mm (A) mm 0-150 (B) mm 40

CODE 10017 PRICE € 28,63

DIGITAL CALIPER FOR TIRE TREAD Steel body LCD screen with 4 digits Keys: ON/OFF, zero, mm/inch Weight:125 g (A) mm 0-27(B) mm 45 ABS case

CODE 10830 PRICE € 51,84

DIGITAL CALIPER IP 54 OUTPUT DATA Prepared for wireless data transmission Hardened stainless steel Professional model IP 54protection 4 measurement functions High visibility LCD screen Made according to DIN862Buttons: ON / OFF, Zero, ABS, mm / inch Resolution 0.01 mm Repeatability ...

CODE 10081 PRICE € 80,80

CATALOG

MECHANICAL MEASUREMENTCALIPERS

DIGITAL CALIPER IP 65 Waterproof and resistant to oil, dust, metal particles Hardened stainless steel Reading: 0.01Accuracy: ± 0.02 mm Repeatability: ± 0.01 mm 4 measurement functions 3 buttons: ON/OFF,zero, mm/inch (A) mm 0-150 (B) mm 40

CODE 10001 PRICE € 73,65

DIGITAL CALIPER IP 67 Waterproof and resistant to oil, dust, metal particles Hardened stainless steel Reading: 0.01Accuracy: ± 0.02 mm Repeatability: ± 0.01 mm 4 measurement functions 3 buttons: ON/OFF,zero, mm/inch (A) mm 0-150 (B) mm 40

CODE 10018 PRICE € 82,23

FEELER GAUGE 13 mm wide

CODE 35100 35101 35102 35103 35104 PRICE € 1,79 € 3,15 € 4,05 € 11,12 € 2,38

CODE 35105 PRICE € 3,55

GAUGE STEEL TOOLS PROFILE CONTROL GAUGE STEEL

CODE 35010 35011 PRICE € 3,95 € 3,99

CATALOG

MECHANICAL MEASUREMENTCALIPERS

GEAR VERNIER CALIPER MOD. 1 ÷ 18 Hardened stainless steel Two verniers with fi ne adjustment Wooden case

CODE 10181 PRICE € 101,53

HALLOW GAUGE Graduated tubular aluminium rod Aluminium base

CODE 10147 10148 10149 10150 PRICE € 144,43 € 158,02 € 169,46 € 183,04

DIGITAL DEPTH CALIPER Hardened Stainless steel 3 buttons: - ON (manual) / OFF (automatic) - reset for comparativemeasurings ± - conversion mm/inch Repeatability 0.01 mm ABS case Accuracy ± 0.02 mm (A) mm0--200 (B) mm 100

CODE 12145 PRICE € 47,91

DIGITAL ELECTRONIC CALIPER Hardened stainless steel Micromeric screw for fi ne adjustment Digital display: - ON/OFF(manual) - reset for comparative measurings ± - mm/inch conversion Repeatability 0,01 mmWooden case

CODE 12110 12111 12113 PRICE € 117,98 € 200,92 € 550,55

CATALOG

MECHANICAL MEASUREMENTCALIPERS

HIGH QUALITY VERNIER CALIPER Hardened stainless steel 4 measurement functions Screw locking Graduated matte scale DIN862 Monobloc (A) mm 0-150 (B) mm 40

CODE 10061 PRICE € 28,92

HIGH VISIBILITY DIGITAL CALIPER Professional model Hardened stainless steel Caliber 4 measure available High visibility LCDscreen - giant numbers ABS function Self-locking Resolution: 0.01 mm / 0.0005 inchRepeatability: 0.01 mm / 0.0005 inch Accuracy: 0.02 mm / 0.001 inches Opera ...

CODE 10080 PRICE € 72,22

LONG BLADES FEELER GAUGE Metal case

CODE 35080 35081 35082 35083 35084 PRICE € 6,95 € 10,66 € 15,73 € 23,77 € 24,10

CODE 35085 PRICE € 33,32

LONG JAWS PRECISION VERNIER CALIPER Hardened stainless steel Matt chromium plated scale Fine adjustment micrometric screw Longjaws suitable for long diameters Locking screw Wooden case

CODE 12120 12121 12122 12123 PRICE € 108,33 € 174,88 € 196,88 € 453,87

CATALOG

MECHANICAL MEASUREMENTCALIPERS

MINI POCKET VERNIER CALIPER Pocket size Hardened stainless steel Chromium plated scale Locking screw (A) mm 0-97 (B)mm 35 Similar leather bag

CODE 10011 PRICE € 16,98

MONOBLOCK VERNIER CALIPER Hardened stainless steel Monoblock 4 measuring functions Lever locking system Mattgraduated scale (A) mm 0-150 (B) mm 40 ABS case

CODE 10072 PRICE € 30,39

MONOBLOCK VERNIER CALIPER 0-155MM Hardened stainless steel Monoblock Locking system with lever 4 ways of measurement (A) mm0-155 (B) mm 40 ABS case

CODE 10037 PRICE € 25,25

PLUG GUAGE Hardened steel plugs To measure the diameter of the holes

CODE 35070 35071 PRICE € 12,52 € 12,52

CATALOG

MECHANICAL MEASUREMENTCALIPERS

MONOBLOC PRECISION VENIER CALIPER Hardened stainless steel Monoblock Long jaws (47 mm) for diameter measurement until 94mm Exclusive locking system with lever that keeps the beaks always perfectly parallel 4 ways ofmeasurement Chromium plated scale Table thread engraved on back sid ...

CODE 10051 PRICE € 35,21

MONOBLOCK PRECISION VERNIER CALIPER Hardened stainless steel Monoblock Long jaws (45 mm) for diameter measurement until 90mm Locking screw 4 ways of measurement Chromium plated scale ABS case

CODE 10058 10059 PRICE € 36,47 € 37,90

NO PARALLAX MONOBLOCK VERNIER CALIPER 0-150MM Hardened stainless steel Monoblock No parallax: graduation and vernier on the same planeLocking screw 4 ways of measurement Chromium plated scale (A) mm 0-150 (B) mm 40 ABS case

CODE 10013 PRICE € 45,05

PRECISION CALIPER WITH FINE ADJUSTMENT Chrome steel - 200 x 0.02 mm Matt chrome graduation Locking screw/br 4 measurementfunctions Fine adjustment (A) mm 0-200 (B) mm 45 ABS box

CODE 10067 PRICE € 30,89

CATALOG

MECHANICAL MEASUREMENTCALIPERS

PRECISION MONOBLOCK VERNIER CALIPER DIN 862 Hardened stainless steel Monoblock Locking screw 4 measuring functions Mattgraduated scale Threaded table on the back side (A) mm 0-150 (B) mm 40 ABS case

CODE 10074 PRICE € 32,21

PRECISION TRAMMEL Stainless steel Engraved graduation Fine adjustment Changeable hardened steel tips

CODE 48071 48072 48073 48074 PRICE € 110,11 € 172,32 € 328,90 € 426,14

PRECISION VERNIER CALIPER Hardened stainless steel Chromium plated scale With roller Locking screw 4 ways ofmeasurement (A) mm 0-155 (B) mm 40 Similar leather case

CODE 10055 PRICE € 26,28

PRECISION VERNIER CALIPER Hardened stainless steel Fine adjustment micrometric screw Screw locking Wooden case

CODE 11020 11021 11022 12040 12041 PRICE € 63,64 € 69,00 € 86,52 € 158,73 € 168,74

CODE 12043 12044 12045 12046 12047 PRICE € 391,82 € 476,19 € 500,50 € 750,75 € 1.608,75

CODE 12048 PRICE € 2.252,25

CATALOG

MECHANICAL MEASUREMENTCALIPERS

PROFESSIONAL TYRE PROFILE DEPTH GAUGE Stainless steel Needle shaped to the groove of tires Similar leather bag

CODE 10820 10821 10822 PRICE € 31,82 € 38,61 € 77,94

RADIUS GAUGE STEEL To determine the radius of concave and convex shapes

CODE 35041 35042 35043 PRICE € 11,80 € 12,80 € 13,05

PRECISION VERNIER CALIPER FOR TURNERS Hardened stainless steel Chromium plated scale Long jaws 55 mm Screw locking Supplied withfl exible rule 200 mm (A) mm 0-200 (B) mm 55 ABS case

CODE 11035 PRICE € 37,54

PRECISION VERNIER CALIPER INSIDE TIPS Hardened stainless steel Matt chromium plated scale Inside counter tips Fine adjustmentmicrometric screw Locking screw Wooden case

CODE 12091 12092 PRICE € 95,10 € 113,69

CATALOG

MECHANICAL MEASUREMENTCALIPERS

PRECISION VERNIER CALIPER OUTSIDE TIPS 0-300MM Hardened stainless steel Matt chromium plated scale Outside counter tips Fine adjustmentmicrometric screw Screw locking (A)=0-300mm (B)=60mm Wooden case

CODE 12072 PRICE € 62,57

SCHOOL TYPE VERNIER CALIPER 0-150MM Hardened stainless steel Chromium plated scale Lever locking system 4 ways of measurementSimilar leather bag

CODE 10031 10038 PRICE € 19,10 € 12,44

SMALL CALIPER Steel pocket caliper Locking screw Dragging wheel

CODE 10700 10701 PRICE € 4,59 € 6,20

THREAD GAUGES STEEL THREAD GAUGES STEEL

CODE 35020 35021 35022 35023 35024 PRICE € 6,40 € 8,23 € 5,92 € 4,94 € 5,54

CATALOG

MECHANICAL MEASUREMENTCALIPERS

UNIVERSAL-GEWINDESTAHL-SCHLEIFLEHRE Universal-Gewindestahl-Schleiflehre (A) 25mm (B) 60mm

CODE 35018 PRICE € 3,88

UNIVERSAL-TRAPEZ-GEWINDE AUS STAHL UNIVERSAL GAUGE FOR TRAPEZES THREAD CONTROL STEEL (A) 25mm (B) 60mm

CODE 35015 PRICE € 3,88

WELDING SEAM GAUGE Welding gauge Stainless steel Chromium plated scale Angles 60°, 70°, 80°, 90° (A) mm 0-20(B) mm 40 Similar leather case

CODE 10480 PRICE € 34,32

WORKSHOP VERNIER CALIPER Hardened stainless steel Chromium plated scale Locking screw 4 ways of measurement (A) mm0-155 (B) mm 40 ABS case

CODE 10039 PRICE € 14,12

CATALOG

MECHANICAL MEASUREMENTCALIPERS

WIRELESS DATA RECEIVER FOR DATA TRANSMISSION TOPERSONAL COMPUTERS Wireless Data Receiver Code 10083 for data transmission to Personal Computers Can be usedwith transmitter Code 10082 It can handle 8 devices Code 10082 simultaneously Operatingfrequency: 2400 / 2483.5 MHz Operating distance 20 m

CODE 10083 PRICE € 80,80

WIRELESS DATA TRANSMITTER FOR DATA TRANSMISSION TOPERSONAL COMPUTERS Wireless Data Transmitter Code 10082 for data transmission to Personal Computers Connectsto the caliber Code 10081 Usable with PC receiver 10083 Operating frequency: 2400 / 2483.5MHz Operating distance 20 m

CODE 10082 PRICE € 80,80

WORKSHOP VERNIER CALIPER Hardened stainless steel Chromium plated scale Locking screw 4 ways of measurement (A) mm0-155 (B) mm 40 ABS case

CODE 10064 PRICE € 12,52

CATALOG

MECHANICAL MEASUREMENTCALIPERS

WORKSHOP VERNIER CALIPER Chrome steel - 150 x 0.02 mm Matt chrome graduation Locking screw 4 measurementfunctions (A) mm 0-150 (B) mm 40 ABS box

CODE 10075 PRICE € 19,13

WORKSHOP VERNIER CALIPER Hardened stainless steel Matt chromium plated scale Fine adjustment micrometric screwScrew locking Wooden case

CODE 12050 12051 12053 PRICE € 113,69 € 137,28 € 363,22

CATALOG

MECHANICAL MEASUREMENTCOMPARATORS

CENTERING HOLDER CENTERING HOLDER For Code 41017, half moon stem Ø 4 x 25 m

CODE 41018 PRICE € 23,99

DIAL INDICATOR WITH LIFTING LEVER Rotating dial Tolerance indices Lifting lever ABS case

CODE 41090 PRICE € 32,89

DIGITAL DIAL INDICATOR Digital display Reading mm/inch High precision Reset in any position Setting of tolerance limitsABS case

CODE 41080 41085 PRICE € 78,65 € 158,73

HIGH PRECISION DIAL INDICATOR 0-30MM Large dial with tolerance indices Locking button ABS case

CODE 41052 PRICE € 121,55

CATALOG

MECHANICAL MEASUREMENTCOMPARATORS

HIGH PRECISION DIAL INDICATOR 0-50MM Large dial with tolerance indices Locking button ABS case

CODE 41053 PRICE € 172,32

HIGH SENSITIVITY DIAL INDICATOR Higt sensitivity millesimal dial indicator Locking button Rotating dial with tolerance indices ABScase

CODE 41027 41028 PRICE € 31,25 € 61,49

HIGH VISIBILITY DIGITAL INDICATOR Display: LCD with high visibility - giant numbers ABS function Resolution: 0.01mm/0.0005Precision: 0.02 mm/0.001 Range: 12.5 mm Buttons: on/off, zero, ABS, mm/inch, TOL Data output:jack std 4-way 2,5 mm ABS case Not to be sold DE / UK / USA / JAP

CODE 41150 PRICE € 101,53

PRECISION DIAL INDICATOR 0-10MM Rotating dial with locking button Tolerance indexes ABS Case

CODE 41019 PRICE € 17,73

CATALOG

MECHANICAL MEASUREMENTCOMPARATORS

PRECISION INDICATOR SMALL DIAMETER 0-5MM Rotating dial with tolerance indexes Accuracy DIN 878 ABS Case

CODE 41010 PRICE € 31,46

SPECIAL DIAL TEST INDICATOR Movable tip with adjustable stand (A) ± 0,8mm (B) Ø 32 Wooden case

CODE 41017 PRICE € 58,63

PRECISION DIAL INDICATOR WITH ADDITIONAL EAR PLATE Higt sensitivity dial indicator, strong execution Rotating dial with tolerance indexes AccuracyDIN 878 ABS case

CODE 41020 41025 41026 PRICE € 32,89 € 61,49 € 103,68

CATALOG

MECHANICAL MEASUREMENTCOUNTERS

LENGTH COUNTER - 5 DIGITS Red decimal Digits height: 6 mm Quick reset Max speed 500 m/min Strong execution forapplication on machines Zama body Weight 360 gr

CODE 65000 65002 65003 65004 PRICE € 123,70 € 123,70 € 123,70 € 123,70

LENGTH COUNTER 5 DIGITS Both ways incremental rotation Red decimal Digits height: 5 mm Reset Max speed 500 m/minBase on request Weight 50 gr 1/1: 1 rev. = 10 cm Suitable for wheels 10 cm circumference (Ref.65020, 65021)

CODE 65110 65112 PRICE € 80,08 € 80,08

LENGTH COUNTER 6 DIGITS Red decimal Digits height: 8 mm Quick reset Max speed 500 m/min Strong execution forapplication on machines Zama body 1/5 (1 rev. = 50 cm) Weight 800 gr.

CODE 65007 65008 PRICE € 220,22 € 220,22

LENGTH COUNTER DEVICE 4 DIGITS Decreasing length counter 1/2 (1 rev. = 20 cm) 4 digits Double display Rope/string groovewheel (20 cm) Presetting of rebooking number button Electrical intervention at “0”

CODE 65030 65031 PRICE € 308,88 € 307,45

CATALOG

MECHANICAL MEASUREMENTCOUNTERS

LENGTH COUNTER DEVICE 4 DIGITS (999,9)- FORCABLES/STRINGS Length counter For cables/strings Ø 2,5 ÷ 9 mm Quick reset button

CODE 65035 PRICE € 178,04

MEASURING WHEEL MEASURING WHEEL

CODE 65020 65021 65022 65024 PRICE € 16,67 € 23,10 € 33,07 € 56,13

POCKET HAND COUNTER 4 DIGITS Digits height: 3,5 mm Reset Max speed 500 strokes/min Weight 60 gr

CODE 65043 65044 PRICE € 30,43 € 30,43

POCKET REVOLUTION COUNTER 4 DIGITS (9999) Both ways rotation Reset Max speed 5000 rpm Weight 160g Rubber tip + a replacement tip

CODE 70000 PRICE € 71,50

CATALOG

MECHANICAL MEASUREMENTCOUNTERS

REVOLUTION COUNTER 5 DIGITS Digits height: 6 mm Both right/left drive Quick reset Max speed 5.000 rpm Zama body Weight360 gr Strong execution suitable to be fi tted on the machines

CODE 70003 70005 PRICE € 136,57 € 136,57

STROKE COUNTER 5 DIGITS Digits height: 5 mm Reset by rotating knob Max speed 1.000 strokes/min Weight 50 gr Plasticbody Waterproof Base on request

CODE 65055 65056 65057 65058 PRICE € 72,93 € 72,93 € 72,93 € 72,93

STROKE COUNTER 5 DIGITS Digits height: 6 mm Both right/left drive Quick reset Max speed 700 strokes/min Weight 360 grZama body Strong execution for application on machines

CODE 65060 65061 PRICE € 124,41 € 124,41

CATALOG

MECHANICAL MEASUREMENTHARDNESS TESTER - MEASURERS OF THICKNESS -

PLICOMETERS

DATA TRANSMISSION KIT - WIRE DATA TRANSMISSION KIT - WIRELESS

CODE 10836 PRICE € 213,79

DATA TRANSMISSION KIT - WIRELESS DATA TRANSMISSION KIT - WIRELESS

CODE 10835 PRICE € 246,68

DIAL THICKNESS GAUGE Reading 0,01 mm (C) 0-10mm (P) 50mm Aluminum support Lifting lever

CODE 43032 43034 43037 PRICE € 127,99 € 199,49 € 140,14

DIAL THICKNESS GAUGE Reading 0.1 mm Ergonomic handle Painted scratch resistant aluminum support Lifting lever

CODE 43049 43055 43056 43057 43059 PRICE € 120,12 € 121,55 € 125,13 € 286,00 € 417,56

CODE 43060 43061 PRICE € 462,61 € 146,58

CATALOG

MECHANICAL MEASUREMENTHARDNESS TESTER - MEASURERS OF THICKNESS -

PLICOMETERS

INSIDE DIAL THICKNESS GAUGE Reading 0.01 mm Wooden case

CODE 43100 43101 43102 PRICE € 129,42 € 129,42 € 145,86

OUTSIDE DIAL THICKNESS GAUGE Reading 0.01 mm Wooden case

CODE 43120 43121 43122 PRICE € 129,42 € 129,42 € 145,86

POCKET THICKNESS GAUGE 0,01 MM Reading 0,01 mm (C) 0-5mm (P) 25mm Pocket running With handle and lifting lever

CODE 43030 PRICE € 77,22

POCKET THICKNESS GAUGE 0,01 MM Reading 0,01 mm Pocket running Extra flat execution

CODE 43031 PRICE € 65,43

CATALOG

MECHANICAL MEASUREMENTHARDNESS TESTER - MEASURERS OF THICKNESS -

PLICOMETERS

QUICK THICKNESS GAUGE Quick thickness gauge Reading: 0,1 mm

CODE 43180 43181 PRICE € 66,50 € 81,51

SHORE A HARDNESS TESTER Shore hardness tester Dial direct reading Shore A scale 0-100 With base In case

CODE 60216 PRICE € 429,00

POCKET THICKNESS GAUGE GRINDED STAINLESS STEEL Reading 0.1 mm Pocket running with lock Ergonomic shape Non slip painted aluminium supportSimilar leather case

CODE 43051 43052 43053 43054 43068 PRICE € 61,85 € 64,71 € 69,00 € 85,09 € 68,29

CODE 43069 PRICE € 72,93

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

3 POINT BORE MICROMETER Reading 0,005 mm With testing rings included Aluminium case Extension

CODE 44250 PRICE € 772,20

BIG SIZE MICROMETER Strong light tubular frame Carbide tips Ø 6.5 mm Tumble Ø 18 mm Lever locking Changeableanvil Reading 0.01 mm Wooden case Accuracy DIN 863

CODE 44081 44082 44083 44084 44085 PRICE € 264,55 € 300,30 € 346,78 € 396,83 € 482,63

CODE 44086 44087 44088 PRICE € 564,85 € 711,43 € 800,80

CONTROL GAUGES FOR 44103 Reading 0,01 mm With jaws With testing rings included Wooden case Accuracy DIN 863

CODE 44106 PRICE € 38,26

CONTROL GAUGES FOR 44104 Reading 0,01 mm With jaws With testing rings included Wooden case Accuracy DIN 863

CODE 44107 PRICE € 53,63

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

DEPTH MICROMETER Reading 0,01 mm Bridge length 100 mm Wooden case Accuracy DIN 863

CODE 44090 44091 PRICE € 83,66 € 153,01

DISC MICROMETER 0-15MM Reading 0.01 mm on a graduated disc Wooden case

CODE 44030 PRICE € 101,53

DISC MICROMETER 0-25MM Gear micrometer Painted frame ABS case

CODE 44021 PRICE € 80,80

ELECTRONIC DIGITAL MICROMETER 5 digits display High accuracy Reading 0,001 mm Reset for comparative measures ± Digitaldisplay of tolerance Wooden case

CODE 44202 44203 44204 44205 PRICE € 119,41 € 141,57 € 163,74 € 172,32

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

INSIDE MICROMETER Reading 0,01 mm With jaws Wooden case Accuracy DIN 863

CODE 44101 44102 44103 44104 PRICE € 63,64 € 79,37 € 95,81 € 103,68

MICROMETER CHANGEABLE ANVIL Painted frame Carbide tips Ø 8 mm Thimble Ø 18 mm Lever locking Changeable anvil Woodencase

CODE 44040 44041 PRICE € 195,20 € 288,15

MICROMETER FRICTION THIMBLE Friction thimble to measure with a single hand Carbide steel tips Locking lever Screw pitch 0,5mm ABS case

CODE 44351 44352 44353 44354 PRICE € 29,32 € 33,75 € 35,40 € 42,90

MICROMETER INTERNAL WITH EXTENSION RODS Reading 0,01 mm Micrometric Head Accuracy DIN 863 Wooden case

CODE 44111 44114 44115 44116 44117 PRICE € 121,55 € 213,07 € 445,95 € 505,25 € 983,49

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

MICROMETER WITH DIAL INDICATOR Millesimal movable anvil Direct reading 0,001 mm on the dial, reading 0,01 mm on the thimbleCase

CODE 44381 PRICE € 306,74

NO PARALLAX MILLESIMAL MICROMETER Double reading: 0,01 mm on thimble, 0,001 mm on the vernier without parallax Friction thimbleto measure with a single hand Carbide steel tips Chromed plated frame Lever locking Screw pitch0,5 mm Stem Ø 6,5 mm In case Accuracy DIN 863

CODE 44371 44372 PRICE € 107,25 € 71,50

OUTSIDE MICROMETER Reading 0.01 mm Chrome plated frame Carbide steel tips Ø 6.5 mm Thimble Ø 18 mm Spindlelock ABS case Accuracy DIN 863

CODE 44061 44062 44063 44064 PRICE € 25,74 € 27,92 € 30,54 € 36,11

OUTSIDE MICROMETER Reading 0.01 mm Painted frame Carbide steel tips Ø 6.5 mm Thimble Ø 18 mm Spindle lockWooden case Accuracy DIN 863

CODE 44065 44066 44067 44068 44069 PRICE € 42,19 € 48,62 € 51,13 € 55,42 € 67,57

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

OUTSIDE MICROMETER Reading 0.01 mm Painted frame Carbide steel tips Ø 6.5 mm Thimble Ø 18 mm Spindle lockWooden case Accuracy DIN 863

CODE 44080 44095 44096 PRICE € 76,51 € 81,51 € 88,66

OUTSIDE MICROMETER WITH COUNTER Carbide tips Counter Reading 0,01 mm Painted frame Wooden case

CODE 44300 44301 PRICE € 38,26 € 52,56

SET OUTSIDE MICROMETER Vertically placed Reading 0.01 mm Chrome plated frame Carbide steel tips Ø 6.5 mm Thimble Ø18 mm Spindle lock Accuracy DIN 863 Wooden case

CODE 44098 44099 PRICE € 122,27 € 229,52

TUBE MICROMETER 0-25MM Reading 0.01 mm Ring nut lock ABS case

CODE 44120 PRICE € 84,37

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

WIRE MICROMETER 0-10MM Reading 0.01 mm In case

CODE 44010 PRICE € 48,98

WORKSHOP MICROMETER Workshop micrometer Carbide steel tips Painted frame Locking lever ABS Case

CODE 44122 44123 44124 44130 PRICE € 22,88 € 20,91 € 27,53 € 15,24

RAPID ELECTRONIC DIGITAL MICROMETER 5-digit digital display IP 54 protection Made according to DIN 863 Buttons: ON / OFF, Set, ABS,mm / inch Resolution 0.001 mm Anvil and frame of hard metal

CODE 44210 44211 44212 44213 PRICE € 67,57 € 84,37 € 102,25 € 119,41

RAPID ELECTRONIC DIGITAL MICROMETER 0-25MM Quick lever movement 5-digit digital display IP 65 protection Made according to DIN 863Buttons: ON / OFF, Origin, ABS / mm / inch Resolution 0,001 mm Anvil and frame of hard metalNot for sale in D / UK / USA / JAP

CODE 44220 PRICE € 210,93

CATALOG

MECHANICAL MEASUREMENTMICROMETERS

RAPID ELECTRONIC DIGITAL MICROMETER IP 65 0-25MM 5-digit digital display IP 65 protection Made according to DIN 863 Buttons: ON / OFF, Origin,ABS / mm / inch Resolution 0,001 mm Anvil and frame of hard metal Not for sale in D / UK / USA/ JAP

CODE 44230 PRICE € 122,98

CATALOG

MECHANICAL MEASUREMENTSCLEROMETERS

CONCRETE SCLEROMETER Hardness reading in kg/cm2 I Supplied with test object I Hard case MADE IN ITALY

CODE 60210 PRICE € 421,30

Powered by TCPDF (www.tcpdf.org)