metrowood...deep abrasion en iso 10545-6 not applicable not applicable surface abrasion en iso...
TRANSCRIPT
-
metrowoodp o r c e l a i n c o l l e c t i o n
-
met
row
ood
porc
elai
n co
llect
ion
2 slate grey matte 8x48 rectified
-
3
met
row
ood
porc
elai
n co
llect
ion
floor/wall tiles
WVT00027 oxford grey cut matte 8”x48” rectified (PEI 3) in stock
WVT00028 seagull grey matte 8”x48” rectified (PEI 4)in stock
WVT00025 slate grey cut matte 8”x48” rectified (PEI 2)in stock
WVT00029 ivory matte 8”x48” rectified (PEI 4)in stock
WVT00026 elephant skin cut matte 8”x48” rectified(PEI 3) in stock
WVT00030 sand matte 8”x48” rectified (PEI 3)in stock
WVT00032 taupe matte 8”x48” rectified (PEI 2)in stock
WVT00031 brown matte 8”x48” rectified (PEI 2)in stock
-
met
row
ood
porc
elai
n co
llect
ion
4 elephant skin cut matte chevron
-
5
met
row
ood
porc
elai
n co
llect
ion
V1 = UNIFORM APPEARANCE: Differences among pieces from the same production run are minimal.
WVT00033 oxford grey cut matte chevron 17”x7 3/4” (PEI 3)in stock
WVT00036 seagull grey matte chevron 17”x7 3/4” (PEI 4)in stock
WVT00034 slate grey cut matte chevron 17”x7 3/4” (PEI 2)in stock
WVT00037ivory mattechevron 17”x7 3/4” (PEI 4)in stock
WVT00035 elephant skin cut matte chevron 17”x7 3/4” (PEI 3)in stock
WVT00038 sand matte chevron 17”x7 3/4” (PEI 3)in stock
WVT00039 taupe matte - S.O*chevron 17”x7 3/4” (PEI 2)in stock
WVT00040 brown matte chevron 17”x7 3/4” (PEI 2)in stock
floor/wall tiles
-
met
row
ood
porc
elai
n co
llect
ion
6 sand matte 8”x48” rectified
-
7
met
row
ood
porc
elai
n co
llect
ion
dimension & surface quality test standard
en 14411:2016group bla, annex gthickness ≥ 7.5mm
glazed (ivory - brown - taupe - sand - elephant skin cut)
tile product values
length & width
EN ISO 10545-2
max. ± 0.6 % & ±2.0mm max. ± 0.6 % & ±2.0mm
thickness max. ± 5 % & ±0.5mm max. ± 5 % & ±0.5mm
straightness of sides max. ± 0.5 % & ±1.5mm max. ± 0.5 % & ±1.5mm
rectangularity max. ± 0.5 % & ±2.0mm max. ± 0.5 % & ±2.0mm
surface flatness (center & edge) max. ± 0.5 % & ±2.0mm max. ± 0.5 % & ±2.0mm
surface flatness (warpage) max. ± 0.5 % & ±2.0mm max. ± 0.5 % & ±2.0mm
surface quality min. 95 % min. 95 %
physical properties
water absorption EN ISO 10545-3 avg. ≤ 0.5 % avg. ≤ 0.5 %
break strengthEN ISO 10545-4
> 1300 N > 1300 N
modulus of rupture > 35 N/mm2 > 35 N/mm2
deep abrasion EN ISO 10545-6 not applicable not applicable
surface abrasion EN ISO 10545-7 report abrasion class & cycles passed PEI 1-5 as specified in catalog
linear thermal expansion EN ISO 10545-8 declared value max. 8 x 10-6 k-1
thermal shock resistance EN ISO 10545-9 pass pass
crazing resistance EN ISO 10545-11 pass pass
frost resistance EN ISO 10545-12 pass pass
slipperiness declared test method declared value R10 (DIN 51130)A (DIN 51097)
moisture expansion EN ISO 10545-10 declared value no performance determined
small color differences (for plain color) EN ISO 10545-16 not applicable not applicable
impact resistance EN ISO 10545-5 declared value no performance determined
bond strength (cementitious adhesives) EN 12004:2007 declared value ≥ 0.5N/mm2 (type C2)
reaction to fire - Class A1 or A1fl class A1fl
chemical resistance
staining resistance EN ISO 10545-14 min. Class 3 min. Class 3
resistance to household chemicals & swimming pool salts
EN ISO 10545-13
min. Class B Class A
resistance to low concentrations of acids & alkalis declared value LA - LC
resistance to high concentrations of acids & alkalis declared value HA - HC
lead & cadmium release EN ISO 10545-15 declared value no performance determined
technical information for 8”x48” tiles
-
met
row
ood
porc
elai
n co
llect
ion
8 elephant skin cut matte 8”x48” rectified
-
9
met
row
ood
porc
elai
n co
llect
ion
dimension & surface quality test standard
en 14411:2012group bla, annex gthickness ≥ 7.5mm
unglazed (slate grey - seagull grey - oxford grey)
tile product values
length & width
EN ISO 10545-2
max. ± 0.6 % & ±2.0mm max. ± 0.6 % & ±2.0mm
thickness max. ± 5 % & ±0.5mm max. ± 5 % & ±0.5mm
straightness of sides max. ± 0.5 % & ±1.5mm max. ± 0.5 % & ±1.5mm
rectangularity max. ± 0.5 % & ±2.0mm max. ± 0.5 % & ±2.0mm
surface flatness (center & edge) max. ± 0.5 % & ±2.0mm max. ± 0.5 % & ±2.0mm
surface flatness (warpage) max. ± 0.5 % & ±2.0mm max. ± 0.5 % & ±2.0mm
surface quality min. 95 % min. 95 %
physical properties
water absorption EN ISO 10545-3 avg. ≤ 0.5 % avg. ≤ 0.5 %
break strengthEN ISO 10545-4
> 1300 N > 1300 N
modulus of rupture > 35 N/mm2 > 35 N/mm2
deep abrasion EN ISO 10545-6 < 175mm3 < 175mm3
surface abrasion EN ISO 10545-7 not applicable not applicable
linear thermal expansion EN ISO 10545-8 declared value max. 8 x 10-6 k-1
thermal shock resistance EN ISO 10545-9 pass pass
crazing resistance EN ISO 10545-11 not applicable not applicable
frost resistance EN ISO 10545-12 pass pass
slipperiness declared test method declared value R10 (DIN 51130)A (DIN 51097)
moisture expansion EN ISO 10545-10 declared value no performance determined
small color differences (for plain color) EN ISO 10545-16 not applicable not applicable
impact resistance EN ISO 10545-5 declared value no performance determined
bond strength (cementitious adhesives) EN 12004:2007 declared value ≥ 0.5N/mm2 (type C2)
reaction to fire - class A1 or A1fl class A1fl
chemical resistance
staining resistance EN ISO 10545-14 declared value min. class 3
resistance to household chemicals & swimming pool salts
EN ISO 10545-13
min. class b class a
resistance to low concentrations of acids & alkalis declared value LA - LC
resistance to high concentrations of acids & alkalis declared value HA - HC
lead & cadmium release EN ISO 10545-15 declared value no performance determined
technical information for 8”x48” tiles
-
met
row
ood
porc
elai
n co
llect
ion
10
compliant with en 14411 (iso 13006) en 14411 - group bla, annex g
thickness ≥ 7.5mm glazed(ivory - brown - sand - taupe)
technical features test method standard values tile product values
water absorption EN ISO 10545-3 avg. ≤ 0.5 % avg. ≤ 0.5 %
break strengthEN ISO 10545-4
> 1300 N > 2000 N
modulus of rupture > 35 N/mm2 > 35 N/mm2
deep abrasion EN ISO 10545-6 not applicable not applicable
surface abrasion EN ISO 10545-7 report abrasion class & no. of cycles at which visual failure occured PEI 1-5 as specified in the catalog
linear thermal expansion EN ISO 10545-8 declared value max. 8 x 10-6 k-1
thermal shock resistance EN ISO 10545-9 confirmed confirmed
crazing resistance EN ISO 10545-11 confirmed confirmed
frost resistance EN ISO 10545-12 confirmed confirmed
moisture expansion EN ISO 10545-10 declared value no performance determined
small color differences (for plain color) EN ISO 10545-16 not applicable not applicable
impact resistance EN ISO 10545-5 declared value no performance determined
bond strength (cementitious adhesives) EN 12004 declared value ≥ 0.5N/mm2 (type C2)
reaction to fire - Class A1 or A1fl Class A1fl
staining resistance EN ISO 10545-14 min. Class 3 min. Class 3
resistance to household chemicals & swimming pool salts
EN ISO 10545-13
min. Class B min. Class B
chemical resistance declared value LA - LCHA - HC
lead & cadmium release EN ISO 10545-15 declared value no performance determined
scratch hardness (Moh’s) EN 101 * no performance determined
color resistance to UV light DIN 51094 * resistant
light reflactance value (LRV) ASTM C609 * no performance determined
slipperiness
DIN 51130
declared value
no performance determined
DIN 51097 no performance determined
BS 7976-2 no performance determined
BS 7976-2 no performance determined
BS 7976-2 no performance determined
BS 7976-2 no performance determined
ANSI A137.1 no performance determined
*hydrofluoric acid and its compounds excluded.
technical information for chevron tiles
-
11
met
row
ood
porc
elai
n co
llect
ion
compliant with en 14411 (iso 13006) en 14411 - group bla, annex g
thickness ≥ 7.5mm glazed(slate grey - seagull grey - oxford grey -
elephant skin cut)
technical features test method standard values tile product values
length & width
EN ISO 10545-2
max. ± 0.4mm (N < 7cm)max. ± 0.3% and ±1.0mm (N ≥ 15cm)
max. ± 0.4mm (N < 7cm)max. ± 0.3% and ±1.0mm (N ≥ 15cm)
thickness max. ± 0.5mm (N < 7cm)max. ± 5% and ±0.5mm (N ≥ 15cm)max. ± 0.5mm (N < 7cm)
max. ± 5% and ±0.5mm (N ≥ 15cm)
straightness of sides not applicable (N < 7cm)max. ± 0.4mm (N ≥ 15cm)not applicable (N < 7cm)
max. ± 0.4mm (N ≥ 15cm)
rectangularity not applicable (N < 7cm)max. ± 0.3% and ±1.5mm (N ≥ 15cm)not applicable (N < 7cm)
max. ± 0.3% and ±1.5mm (N ≥ 15cm)
surface flatness (center & edge) not applicable (N < 7cm)max. ± 0.4mm and ±1.8mm (N ≥ 15cm)not applicable (N < 7cm)
max. ± 0.4mm and ±1.8mm (N ≥ 15cm)
surface flatness (warpage) not applicable (N < 7cm)max. ± 0.4mm and ±1.8mm (N ≥ 15cm)not applicable (N < 7cm)
max. ± 0.4mm and ±1.8mm (N ≥ 15cm)
surface quality min. 95 % min. 95 %
water absorption EN ISO 10545-3 avg. ≤ 0.5 % avg. ≤ 0.5 %
break strengthEN ISO 10545-4
> 1300 N > 2000 N
modulus of rupture > 35 N/mm2 > 35 N/mm2
deep abrasion EN ISO 10545-6 not applicable not applicable
surface abrasion EN ISO 10545-7 report abrasion class & no. of cycles at which visual failure occured PEI 1-5 as specified in catalog
linear thermal expansion EN ISO 10545-8 declared value max. 8 x 10-6 k-1
thermal shock resistance EN ISO 10545-9 confirmed confirmed
crazing resistance EN ISO 10545-11 confirmed confirmed
frost resistance EN ISO 10545-12 confirmed confirmed
moisture expansion EN ISO 10545-10 declared value no performance determined
small color differences (for plain color) EN ISO 10545-16 not applicable not applicable
impact resistance EN ISO 10545-5 declared value no performance determined
bond strength (cementitious adhesives) EN 12004 declared value ≥ 0.5N/mm2 (type C2)
reaction to fire - Class A1 or A1fl Class A1fl
staining resistance EN ISO 10545-14 min. Class 3 min. Class 3
resistance to household chemicals & swimming pool salts
EN ISO 10545-13
min. Class B min. Class B
chemical resistance declared value LA - LCHA - HC
lead & cadmium release EN ISO 10545-15 declared value no performance determined
scratch hardness (Moh’s) EN 101 * no performance determined
color resistance to UV light DIN 51094 * resistant
light reflactance value (LRV) ASTM C609 * no performance determined
slipperiness
DIN 51130
declared value
no performance determined
DIN 51097 no performance determined
BS 7976-2 no performance determined
BS 7976-2 no performance determined
BS 7976-2 no performance determined
BS 7976-2 no performance determined
ANSI A137.1 no performance determined
*hydrofluoric acid and its compounds excluded.
technical information for chevron tiles
-
MARBLE SYSTEMS
MID-ATLANTIC & MID-WEST DIVISION2737 DORR AVENUE FAIRFAX, VA 22031 PHONE : 703 226 1590 FAX : 703 226 1591
NORTHEAST DIVISION610 WASHINGTON AVE CARLSTADT, NJ 07072 PHONE : 201 507 0111 FAX : 201 507 0888
WEST COAST DIVISION2111 E HOWELL AVE, ANAHEIM, CA 92806 PHONE : 714 525 8910 FAX : 714 525 8911
MIAMI & CARIBBEAN DIVISION2716 PONCE DE LEON BLVD. CORAL, GABLES, FL 33134 PHONE : 305 463 9850 FAX : 305 463 9851
SOUTHEAST DIVISION
2010 WEST ATLANTIC BLVD. POMPANO BEACH, FL 33069PHONE : 954 979 9530 FAX : 954 979 9531
PUERTO RICO DIVISION279 JOSÉ DE DIEGO AVE. SAN JUAN, PR 00920 PHONE : 787 793 5642 FAX : 787 774 8238
DOMINICAN REPUBLICCALLE DR MANUEL EMILIO PERDOMO #33, LOCAL 3 ENSANCHE NACO
SANTO DOMINGO, REPÚBLICA DOMINICANA PHONE: 809 692 2391
COUNTRY FLOORS
NEW YORK15 EAST 16TH STREET NEW YORK, NY 10003 PHONE : (212) 627 8300 FAX : (212) 242 1604
LOS ANGELES8735 MELROSE AVENUE LOS ANGELES, CA 90069 PHONE : (310) 657 0510 FAX : (310) 657 2172
SAN FRANCISCOTWO HENRY ADAMS STREET ST. 100 SAN FRANCISCO, CA 94103 PHONE : (415) 241 0500 FAX : (415) 241 0600
MANUFACTURING FACILITIES
CHANTILLY25383 PLEASANT VALLEY ROAD, CHANTILLY, VA 20152 PHONE : 703 337 1500 FAX: 703 337 1501
MGMORGANIZE SANAYI BOLGESI 1. CD. 12. SK. NO: 8 AFYONKARAHISAR/TURKEY PHONE : +90 541 472 2205
TUREKSORGANIZE SANAYI BOLGESI 1. CD. 5. SK. AFYONKARAHISAR/TURKEY PHONE : +90 272 221 1600
marblesystemsinc marblesystems1 marblesystems1 marblesystems marblesystems
CountryFloors countryfloors1 countryfloors countryfloors country_floors
COPYRIGHT © 2021 MARBLE SYSTEMS, INC.