mfz produktreihen mdf mwf 2011 120711 - elreda · technical data at a glance. mdf slip-on drives...
TRANSCRIPT
Roller shutter drives Rolltorantriebe
MDF Drehstrom-Aufsteckantriebe
MWF Wechselstrom-Aufsteckantriebe
MDF Three-phase a.c. slip-on drive
MWF Single-phase a.c. slip-on drive
MDF / MWF
Prod
uktre
ihen
· P
rodu
ct s
erie
s
MDF / MWF 2011 / 2012
MFZ_Produktreihen MDF_MWF 2011_120711.indd 1MFZ_Produktreihen MDF_MWF 2011_120711.indd 1 14.07.11 10:3914.07.11 10:39
2 3
www.mfz-antriebe.de
Rolltorantriebe
Aufsteckantriebe für Rolltore und Rollgittermit integrierter Fangvorrichtung.
MDF / MWF 30
300 – 500 Nm
Slip-on drives for roller shutters and roller grilleswith integrated safety catch device.
MDF 50
650 – 750 Nm
Die MFZ-Aufsteckantriebe der Serien MDF und MWF zeichnet eine kompakte Bauform aus, die für beste Montagemöglich-keiten sorgt. Die wartungsfreie Fangvorrichtung ist bereits integriert und bietet somit die sicherste Lösung für das Tor. Mit einer kompletten Baureihe von 100 bis 2000 Nm bietet MFZ in diesem Bereich für jede Vor-Ort-Gegebenheit die passende Lösung. Darüber hinaus können Sonderlösungen für individuelle Kundenanforderungen jederzeit fl exibel und schnell realisiert werden.
The MDF and MWF series of MFZ slip-on drives are char-acterised by their compact design, facilitating the widest range of installation possibilities. The maintenance-free safety catch device is already integrated and therefore offers the safest option for the gate. With a complete series from 100 to 2000 Nm, MFZ provides the right solution in this category for every on-site situation. In addition, special requirements for individual clients can be quickly and fl exibly achieved at any time.
Endlageneinstellung · End position setting
über Absolutwertgeber oder mechanischen Endschaltervia absolute value encoder or mechanical limit switches
Roller shutter drives
Notbedienung · Emergency operation
mit Nothandkurbel (1-seitig oder 2-seitig) oder Nothandkettewith emergency hand crank (one-sided or two-sided) or emergency hand chain
integrierte Fangvorrichtung,lage- und drehzahlunabhängigPendelfußlagerunggerollte SchneckenwelleThermoschutz in der Motorwicklung230 / 400V / 50 Hz / 3~, Sonderlösungen auf Anfragesteckbare Anschlüssekombinierbar mit umfangreichem SteuerungsprogrammAusführung mit externer oder integrierter Steuerungeinfache Umrüstung von Kurbel auf Kette
Merkmale
integrated safety catch device,independent of position and speedself-aligning bearingsrolled worm shaftthermal protection in the motor windings230 / 400V / 50 Hz / 3~, special options on requestplug-in connectionsfor combination with an extensive control programmeavailable with external or integrated controlseasy modifi cation from crank to chain
Characteristics
MDF / MWF 05
140 Nm
MDF / MWF 20220 Nm
MDF 60
1000 – 1400 Nm
MDF 70
1650 – 2000 Nm
AchsmaßDimension between centre lines
145 mm oder 120 mm (nur für MDF 20 / MDF 30)145 mm or 120 mm (only for MDF 20 / MDF 30)
Zyklen pro Stunde · Cycles per hourEinschaltdauer · Motor duty cycle
Höhere Einschaltdauer lieferbarHigher motor duty cycle available
MFZ_Produktreihen MDF_MWF 2011_120711.indd 2-3MFZ_Produktreihen MDF_MWF 2011_120711.indd 2-3 14.07.11 10:3914.07.11 10:39
4 5
www.mfz-antriebe.de
20006529
8
2,5 400 / 3~
50248,120
S3 - 605 x 1,510,054
–20 / +60< 70 813655
MDF 70-200-8
6505136
10
1,2400 / 3~
50243,320
S3 - 605 x 1,510,054
–20 / +60< 70413650
MDF 50-65-10
7505136
10
1,4400 / 3~
50243,920
S3 - 605 x 1,510,054
–20 / +60< 70413650
MDF 50-75-10
10005599
9
1,5400 / 3~
50246,920
S3 - 605 x 1,510,054
–20 / +60< 70723650
MDF 60-100-9
16506529
8
2,2400 / 3~
50246,720
S3 - 605 x 1,510,054
–20 / +60< 70 723655
MDF 70-165-8MDF 30-50-12
5002680
12
1,1400 / 3~
50245,7 20
S3 - 605 x 1,510,054
–20 / +60< 70291840
MDF 30-42-12
420268012
1,1400 / 3~
50245,120
S3 - 605 x 1,510,054
–20 / +60< 70271840
MDF 30-30-12
3002680
12
1,1400 / 3~
50243,1 20
S3 - 605 x 1,510,054
–20 / +60< 70231830
MDF 20-22-12
22078412
0,75400 / 3~
50242,820
S3 - 605 x 1,510,054
–20 / +60< 70191830
MDF 05-14-12
14030912
0,45 400 / 3~
50241,9 20
S3 - 605 x 1,510,054
–20 / +60< 70161330
MDF 70MDF 50MDF 30MDF 20MDF 05
Rolltorantriebe
Technische Daten im Überblick. Aufsteckantriebe MDF / MWF. Technical data at a glance. MDF / MWF slip-on drives.
Roller shutter drives
MDF 60
Technische Daten
AbtriebsdrehmomentMaximales FangmomentAbtriebsdrehzahl
MotorleistungBetriebsspannungNetzfrequenzSteuerspannungMotor-NennstromMax. Schaltungen pro Stunde*Motor-EinschaltdauerBauseitige ZuleitungBauseitige AbsicherungSchutzart
Temperaturbereich**DauerschalldruckpegelStückgewichtMaximale Umdrehungen AbtriebHohlwelle
NmNm
min –1
kWV
HzVA
%mm2
AIP
°CdB (A)
kg
mm
Technical details
driving torquemaximum safety catch torque
driving motor speed
motor outputoperating voltagemains frequency
control voltagemotor current rating
* max. cycles per hourmotor duty cycle
supply cable, on sitefuse protection, on site
protection grade
** temperature rangecontinuous sound pressure level
individual weightmaximum output revolutions
Ø sleeve shaft
NmNmmin –1
kWVHzVA
%mm 2
AIP
°CdB (A)kg
mm
Other voltages, frequencies, sleeve shaft- Ø, driving motor speeds and higher protection grades on request. Accessories and controls see other brochures.
* A switching operation corresponds to a cycle consisting of opening and closing the door. The values given assume an even distribution.
** temperature range < –5 °C: oil grade and electric heating on request
Weitere Spannungen, Frequenzen, Hohlwellen-Ø, Abtriebsdrehzahlen und höhere Schutzarten auf Anfrage. Zubehör und Steuerungen siehe weitere Prospekte.
* Eine Schaltung entspricht einem Zyklus aus Öffnung und Schließung des Tores. Die angegebenen Werte setzen eine gleichmäßige Verteilung voraus.** Temperaturbereiche < –5 °C: Ölsorte und Elektroheizung auf Anfrage
14005599
9
2,0400 / 3~
50247,020
S3 - 605 x 1,510,054
–20 / +60< 70753650
MDF 60-140-9
MFZ_Produktreihen MDF_MWF 2011_120711.indd 4-5MFZ_Produktreihen MDF_MWF 2011_120711.indd 4-5 14.07.11 10:4014.07.11 10:40
6 7
www.mfz-antriebe.de
MDF 50-65-10
6505136
10
1,1400 / 3~
50243,130
S3 - 805 x 1,510,054
–20 / +60< 70423650
MDF 30-27-12
2702680
12
0,75400 / 3~
50242,130
S3 - 805 x 1,510,054
–20 / +60< 70301840
MDF 20-15-12
15078412
0,75400 / 3~
50241,830
S3 - 805 x 1,510,054
–20 / +60< 70211830
MDF 05-10-12
10030912
0,37400 / 3~
50241,530
S3 - 805 x 1,510,054
–20 / +60< 70181330
Rolltorantriebe
MWF 30-38-12
3802680
12
1,2230 / 1~
5024
14,012
S3 - 253 x 2,516,054
–20 / +60< 70271840
MWF 30-28-12
2802680
12
0,75230 / 1~
5024
12,012
S3 - 253 x 2,516,054
–20 / +60< 70271840
MWF 20-22-12
22078412
0,6230 / 1~
50249,512
S3 - 253 x 1,510,054
–20 / +60< 70191830
MWF 05-14-12
14030912
0,4230 / 1~
50246,512
S3 - 253 x 1,510,054
–20 / +60< 70161330
Roller shutter drives
Technische Daten im Überblick. Aufsteckantriebe MDF – Einschaltdauer 80%.Technical data at a glance. MDF slip-on drives – 80% motor duty cycle.
Technische Daten im Überblick. Aufsteckantriebe MWF-Wechselstromantriebe.Technical data at a glance. Slip-on drives MWF-single phase drives.
MWF 05 MWF 20 MWF 30MDF 05 80% MDF 20 80% MDF 30 80% MDF 50 80%
Technische Daten
AbtriebsdrehmomentMaximales FangmomentAbtriebsdrehzahl
MotorleistungBetriebsspannungNetzfrequenzSteuerspannungMotor-NennstromMax. Schaltungen pro Stunde*Motor-Einschaltdauer Bauseitige ZuleitungBauseitige AbsicherungSchutzart
Temperaturbereich**DauerschalldruckpegelStückgewichtMaximale Umdrehungen AbtriebHohlwelle
NmNm
min –1
kWV
HzVA
%mm2
AIP
°CdB (A)
kg
mm
Technical details
driving torquemaximum safety catch torque
driving motor speed
motor outputoperating voltagemains frequency
control voltagemotor current rating
* max. cycles per hourmotor duty cycle
supply cable, on sitefuse protection, on site
protection grade
** temperature rangecontinuous sound pressure level
individual weightmaximum output revolutions
Ø sleeve shaft
NmNmmin –1
kWVHzVA
%mm 2
AIP
°CdB (A)kg
mm
Other voltages, frequencies, sleeve shaft- Ø, driving motor speeds and higher protection grades on request. Accessories and controls see other brochures.
* A switching operation corresponds to a cycle consisting of opening and closing the door. The values given assume an even distribution.
** temperature range < –5 °C: oil grade and electric heating on request
Weitere Spannungen, Frequenzen, Hohlwellen-Ø, Abtriebsdrehzahlen und höhere Schutzarten auf Anfrage. Zubehör und Steuerungen siehe weitere Prospekte.
* Eine Schaltung entspricht einem Zyklus aus Öffnung und Schließung des Tores. Die angegebenen Werte setzen eine gleichmäßige Verteilung voraus.** Temperaturbereiche < –5 °C: Ölsorte und Elektroheizung auf Anfrage
MFZ_Produktreihen MDF_MWF 2011_120711.indd 6-7MFZ_Produktreihen MDF_MWF 2011_120711.indd 6-7 14.07.11 10:4014.07.11 10:40
8 9
www.mfz-antriebe.de
Rolltorantriebe
Die Auswahl des richtigen Aufsteckantriebs.Zur Auswahl der optimalen Antriebslösung wird der Durchmesser der Wickelwelle in mm und das Panzergewicht des Tores in kg benötigt. Mit Hilfe der Parameter lässt sich über die untenstehende Tabelle der richtige Rolltorantrieb einfach und sicher bestimmen.
Selecting the right slip-on drive.To select the optimum drive solution you will need the diameter of the winding shaft in mm
and the armour weight of the gate in kg. With the help of these parameters, the appropriate roller shutter drive can be determined easily and reliably using this table.
Roller shutter drives
MDF 05-14-12MDF 05-10-12 80%
MDF 20-22-12MDF 20-15-12 80%
MDF 30-30-12MDF 30-42-12MDF 30-27-12 80%MDF 30-50-12
MDF 50-65-10MDF 50-75-10MDF 50-65-10 80%
MDF 60-100-9MDF 60-140-9
MDF 70-165-8MDF 70-200-8
MWF 05-14-12MWF 20-22-12MWF 30-28-12MWF 30-38-12
101,6 x 3,6
225161
353241
482674433803
104312041043
16052249
26483210
225353450610
108,0 x 3,6
211151
332227
453634408755
9821133982
15102116
24913020
211332422574
127,0 x 4,0
180128
283193
385539347642
835963835
12841799
21192568
180283359488
133,0 x 4,0
172123
270184
368515331613
797920797
12261718
20232452
172270343466
139,7 x 4,5
163117
257175
350490315584
759876759
11671636
19262334
163257328444
165,0 x 4,5
13899
217148
297415267494
643741643
9881385
16301976
138217276376
159,0 x 4,5
144103
226154
308431277513
667769667
10261437
16922052
144226287390
177,8 x 5,0
12892
202138
275385248459
596688596
9171285
15131834
128202257349
193,7 x 5,4
11884
185126
253354227421
547632547
8421180
13891684
118185236320
219,1 x 5,9
10474
164112
223313201372
484558484
7441043
12281488
104164208283
229,0 x 5,9
10071
157107
214299192356
463534463
712998
11751424
100157199271
244,5 x 6,3
9367
147100
200280180334
434500434
667934
11001334
93147187253
267,0 x 6,3
8661
13492
183257165305
397458397
611856
10071222
86134170232
273,0 x 6,3
8460
13190
179251161299
388448388
597837
9851194
84131167227
298,5 x 7,1
7655
12082
164229148273
355410355
546765
9011092
76120152208
323,9 x 7,1
7050
11176
151211136252
327378327
504705
8301008
70111140191
368,0 x 8,0
6244
9866
133186120222
288332288
443621
731886
6298
124168
355,6 x 8,0
6446
10169
138193124229
298344298
459643
756918
64101128174
406,4 x 8,8
5640
8860
120169108200
261301261
401562
662802
5688
112153
Abmessungen der Wickelwelle in mm (Durchmesser x Wandstärke)
Die Tabellenwerte berücksichtigen eine Sicherheitsreserve von 20%. In bestimmten Situationen, bspw. bei zusätzlichen
Tordichtungen oder doppelwandigen Profi len, kann die Reibung größer sein und muss entsprechend bei den Werten
aufgerechnet werden. Für Toranlagen mit überdurchschnittlichen Schaltungen ist ein Antrieb mit 80% ED zu wählen.
The values in the table take into account 20% safety reserve. In certain situations, e.g. for additional gate seals
ordouble skin profi les, the friction can be greater than this and must be included when calculating the values.
For gate systems with more circuits than usual, a drive with 80% duty cycle should be choosen.
Aufsteckantriebe MDF / MWF MDF / MWF slip-on drives
Dimensions of the winding shaft in mm (diameter x wall thickness)
Maximum armour weights in kg Maximale Panzergewichte in kg
kgØAntriebDrive
MFZ_Produktreihen MDF_MWF 2011_120711.indd 8-9MFZ_Produktreihen MDF_MWF 2011_120711.indd 8-9 14.07.11 10:4014.07.11 10:40
10 11
www.mfz-antriebe.de
Rolltorantriebe Roller shutter drives
Abmessungen Aufsteckantriebe MDF / MWF. Dimensions of MDF / MWF slip-on drives.
MDF 20-22-12 KU
153
14520
8264
190
110
220
163 63
Ø 30
83,3
114
101
267
43
13
421
MDF 05-14-12 KU
100
290
5515018
5
85
170
145
6
63148150
83,3
Ø 30
108
104
100
386
50
13
30
MDF 30-42-12 KU
120
103130
230
260
145
22528
7
200
123,3
214 63
Ø 40123,
3
Ø 40
43
13
507
MDF 30-30-12 KU
103
122
230
260
447
13
145
22528
7
200
8
Ø 30 130
3,3
43
154 63
8
Ø 30
3,3
MFZ_Produktreihen MDF_MWF 2011_120711.indd 10-11MFZ_Produktreihen MDF_MWF 2011_120711.indd 10-11 14.07.11 10:4014.07.11 10:40
12 13
www.mfz-antriebe.de
Rolltorantriebe Roller shutter drives
Abmessungen Aufsteckantriebe MDF / MWF. Dimensions of MDF / MWF slip-on drives.
MDF 30-50-12 KU
230260
130
145
22528
7200
Ø 40
12
3,3
263 63
13 43
555
103
122
325
3,3
Ø 40
12
3,3
MDF 50-65-10 KU / MDF 50-75-10 KU
135
23129
1
222
130
200
260
4080
13
14
258 63
Ø 50
104124
294 33
1
143,8
126
571
143,8
80
Ø 50
MDF 60-140-9 KU
63
200
185
365
277
14
295
309
MDF 60-100-9 KU
129140
36540
5445
19467
17
712
445
14
3,8 Ø 50
63
200
185
365
295
277
14
291
129
418
140
405
67
17
694
14
3,8 Ø 50
MFZ_Produktreihen MDF_MWF 2011_120711.indd 12-13MFZ_Produktreihen MDF_MWF 2011_120711.indd 12-13 14.07.11 10:4014.07.11 10:40
14 15
www.mfz-antriebe.de
Rolltorantriebe Roller shutter drives
Abmessungen Aufsteckantriebe MDF / MWF. Dimensions of MDF / MWF slip-on drives.
MDF 70-165-8 KU
320
200
410
20016 350
400
330
332 63
Ø 55
150
194
471
765
17,5 67,5
016
4,3
Ø 55
MDF 20-15-12 KU 80%
153
145
208
264
110
190
220
8
180 63
3,3
Ø 30101
136
317
438
13
43
8
3,3
Ø 30
MDF 70-200-8 KU
67,5
17,5
778
16
Ø 554,3
216
149
410
160
491
63
200350400
200
33041
0
320 345
16
MDF 05-10-12 KU 80%
418
50
13
30
100
104
136
290
185
170
145
6
63150
85
10015
0
55
Ø 308
3,3
180
Ø 308
3,3
MFZ_Produktreihen MDF_MWF 2011_120711.indd 14-15MFZ_Produktreihen MDF_MWF 2011_120711.indd 14-15 14.07.11 10:4014.07.11 10:40
16 17
www.mfz-antriebe.de
Rolltorantriebe Roller shutter drives
Abmessungen Aufsteckantriebe MDF / MWF. Dimensions of MDF / MWF slip-on drives.
MWF 05-14-12 KU
150 163 63
145
170
685
10015
0185
290
55
83,3
Ø 30
104
108
100
30
50
13
401
83,3
Ø 30
MWF 20-22-12 KU
153
145
20826
4
190
110
220
8
3,3
183 63
Ø 30
114
101
300
13
441
43
8
3,3
Ø 30
MDF 30-27-12 KU 80%
230130
260
145
22528
7200
12
260 63
3,3
Ø 4
103
174
372
13
43
553
12
3,3
Ø 40
MDF 50-65-10 KU 80%
599
104124
375
174
135
23129
1
222
130
Ø 50143,
8
200
260
4080
13
14
63286
Ø 50143,
8
MFZ_Produktreihen MDF_MWF 2011_120711.indd 16-17MFZ_Produktreihen MDF_MWF 2011_120711.indd 16-17 14.07.11 10:4014.07.11 10:40
18 19
www.mfz-antriebe.de
Rolltorantriebe Roller shutter drives
Abmessungen Aufsteckantriebe MDF / MWF. Dimensions of MDF / MWF slip-on drives.
MWF 30-28-12 KU
130
230
260
145
22528
7200 214 63
Ø 40
120
103
344
33
13
43
507
123,3
Ø 40
MWF 30-38-12 KU
130
230
260
145
287
200
12
225
244 63
Ø 40
120
103
344
13
43
537
123,3
Ø 40
MDF 05 / MDF 20
Notbedienung KE · Emergency hand chain
109 64
83
MDF 30 / MDF 50 / MDF 60 / MDF 70
Notbedienung KE · Emergency hand chain
127 63
126
MFZ_Produktreihen MDF_MWF 2011_120711.indd 18-19MFZ_Produktreihen MDF_MWF 2011_120711.indd 18-19 14.07.11 10:4014.07.11 10:40
www.mfz-antriebe.de
MFZ-Produkte im Überblick: Overview of MFZ products:
Rolltorantriebe
Fangvorrichtungen
Schnelllauftorantriebe
Sektionaltorantriebe
Feuerschutztorantriebe
Antriebe für explosionsgeschützte Räume
Spezialantriebe
Schiebetorantriebe
Garagentorantriebe
Steuerungen
Sicherheitssysteme und Sensoren
Zubehör
Roller shutter drives
Safety catch devices
High speed door drives
Drives for sectional doors
Fire-proof door drives
Drives for explosion protected areas
Special drives
Sliding gate drives
Garage door drives
Controls
Safety systems and sensors
Accessories
2011 / 2012
MFZ_Produktreihen MDF_MWF 2011_120711.indd 20MFZ_Produktreihen MDF_MWF 2011_120711.indd 20 14.07.11 10:4014.07.11 10:40