mguide universal pilot drills kit wall chart
DESCRIPTION
ÂTRANSCRIPT
MP-WCG04 Rev. 1 Feb.2015
UNIVERSAL PILOT DRILLS Kitwall chart
The MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and CE Directive for Medical Devices 93/42/EEC. MIS products
are cleared for marketing in the USA and CE approved.
MIS Implants Technologies Ltd. www.mis-implants.com
®
MGUIDE Tools Kit Contents:
9
MG-FP020Fixation pin Ø.2mm
MG-P1124Universal pilot drill Ø2.40 L 11.50mm
5
MG-P1024Universal pilot drill Ø2.40 L 10mm
4
MG-P0824Universal pilot drill Ø2.40 L 8mm
MG-P0624Universal pilot drill Ø2.40 L 6mm
MG-PBM24Universal pilot bone mill Ø2.40mm
1
2MG-PTAS0Universal template anchoring screw Ø2.40mm
3
8
MG-DFP20Drill for fixation pin, Ø.2 mm
10
6
7
MT-RI030Ratchet wrench
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
The surgical kit can be fully sterilized using pre-vacuum autoclave at 134°C (273°F) for 6 minutes. After mechanical or clinical cleaning, all surgical instruments must be sterilized in an autoclave at 134°C (273°F) for 6 minutes. Do not exceed 134°C. Never use dry sterilizers.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MG-P1324Universal pilot drill Ø2.40 L 13mm
34
SPARE
FIXATION DRILL ø2
FIXATION & ANCHORING TOOLS
FIXATION PINS
BONE MILL
6mm 8mm 10mm 11.5mm 13mm
PILOT DRILLS ø2.40
TEMPLATE ANCHORING SCREWS
UNIVERSALKIT
9
54
1
2 3
8
10
6
7 { {Drill laser marks
Side 1: Drill cutting length & diametersL1
1.5
Ø2.
4
Drilling Speed (RPM)
Ø2.40mm
Starter DrillMG-N0624
400-600
400-600
*
*
*
The drilling sequence is demonstrated by a 11.5mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪
▪
MGUIDE Tools Kit Contents:
9
MG-FP020Fixation pin Ø.2mm
MG-P1124Universal pilot drill Ø2.40 L 11.50mm
5
MG-P1024Universal pilot drill Ø2.40 L 10mm
4
MG-P0824Universal pilot drill Ø2.40 L 8mm
MG-P0624Universal pilot drill Ø2.40 L 6mm
MG-PBM24Universal pilot bone mill Ø2.40mm
1
2MG-PTAS0Universal template anchoring screw Ø2.40mm
3
8
MG-DFP20Drill for fixation pin, Ø.2 mm
10
6
7
MT-RI030Ratchet wrench
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
The surgical kit can be fully sterilized using pre-vacuum autoclave at 134°C (273°F) for 6 minutes. After mechanical or clinical cleaning, all surgical instruments must be sterilized in an autoclave at 134°C (273°F) for 6 minutes. Do not exceed 134°C. Never use dry sterilizers.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MG-P1324Universal pilot drill Ø2.40 L 13mm
34
SPARE
FIXATION DRILL ø2
FIXATION & ANCHORING TOOLS
FIXATION PINS
BONE MILL
6mm 8mm 10mm 11.5mm 13mm
PILOT DRILLS ø2.40
TEMPLATE ANCHORING SCREWS
UNIVERSALKIT
9
54
1
2 3
8
10
6
7 { {Drill laser marks
Side 1: Drill cutting length & diametersL1
1.5
Ø2.
4
Drilling Speed (RPM)
Ø2.40mm
Starter DrillMG-N0624
400-600
400-600
*
*
*
The drilling sequence is demonstrated by a 11.5mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪
▪
MP-WCG04 Rev. 1 Feb.2015
UNIVERSAL PILOT DRILLS Kitwall chart
The MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and CE Directive for Medical Devices 93/42/EEC. MIS products
are cleared for marketing in the USA and CE approved.
MIS Implants Technologies Ltd. www.mis-implants.com
®