MH 201, 203, 205Classroom Technology

University of Dayton Information TechnologyClassroom Support

Data Projector Controls

Press “PROJ. ON” to power on projector. Press “PROJ. OFF” to Power off projector

Pressing “AUDIO MUTE” turns off the sound until pressed again. Pressing “PROJ. MUTE” blanks the display until pressed again

Select what SOURCE (1 -8) to display. Green LED light signifies what SOURCE is selected

POWER

Source Select

MUTE Audio

Press the ▲ to increase volume. Press ▼ to decrease volume. The more LEDs lit, the louder the volume

DVD / VHS / CATV Controls

DVD/VHS Player can be found below podium

Select MENU to bring up the DVD main menu. Select ENTER to commit a selection on the DVD’s menu

Use directional buttons ▲►▼◄ to navigate through DVD menus

Select VCR or DVD in order to send the correct commands to the DVD/VCR.

Source Select

Source Control

Cable

• In VCR MODE ONLY select “Channel UP” or “Channel Down” to change cable channels

DVD Menu

DVD Menu

Make sure to select the proper input first (DVD/VCR) to display to the projector

Additional Input

For assistance please contact Technology Support Services at 229-3888.

USB ports are connected to the podium PC

Additional VGA input can be used to connect a laptop. Make sure to select the appropriate source (Laptop) on the control panel to display to the projector.

Data port for hardline internet connection

POWERPress grey power button

LIGHT• Move switch to left to

light subject• Move switch to right to

turn off light

LED Color Indicates Status

GREEN Normal

RED Standby Press power button to activate

ORANGE Incorrect input

Switch input from TV to VGA or

contact support for assistance

ZOOM +/-Press to increase or

decrease image of subject

AUTO FOCUSPress and lens automatically

adjusts for best image of subject

Document Camera

PC Login

Login with your UD Novell username in password. If Novell is down you can click on “Computer Only Login” and use the username: faculty and password: (none, leave blank)

Classrooms Are Shared SpacesSo please…

• Do not store sensitive data on Classroom PCs • Log off of Classroom PCs after use (Do not shut

down)• Power off projector(s)• Remember any flash drives, belongings

For assistance please contact Technology Support Services at 229-3888.