mh2.6 mh3.6 0.10 - 0.28 m - hydrex s.r.o.5 mh2.6 mh3.6 net flywheel power (iso 14396) 74 kw/99 hp 84...

MH2.6 MH3.6NET FLYWHEEL POWER 74 kW - 99 hp 84 kW - 113 hp

OPERATING WEIGHT 10 000 kg 12 600 kg

BUCKET CAPACITY 0.10 - 0.28 m3 0.23 - 0.57 m3

MH2.6/3.6

2

1485/1670�

MAiN FEATURES AND PERFORMANCES

Easy operation in narrow jobsites thanks to compact upper

structure and minimum frontswing radius.

“Digging wall” capability due tostandard hydraulic boom

foot articulation.

The New Holland MH machines offeras standard a compact upperstructure,

integrating longitudinal engine.Even with a reduced tail radius,

the service point accessibilityis enhanced and the best access for service

and maintenance is accessible from ground level.CNH engines give superior power output

whilst respecting the strict European Tier 2 Rules.Modern, quiet, with low fuel consumption

and designed for reliability, the CNH enginereduces owning and operating costs.

Engine auto idle can be activated manually.

Pipings for clamshell bucket operation androtation are standard.

Main valve with provision for hydraulic hammerand crusher.

Patented antidrop safety valves are standardon boom and dipper cylinders.

3

OUTSTANDING“HIGH SPACE” CAB“High space” cab, as roomy as on higher class excavators,

designed with the operator in mind:� Spacious and ergonomic environment with tinted glass.� Offering outstanding all-round visibility.� Modular total or partial opening windscreen with

front sunshade and transparent rain shield.� Large transparent cab roof with sunshade.� Fully adjustable suspension seat.� Steering column with continuously adjustable inclination.� Exceptionally quiet cab.

� Easy to operate joystick controls and pedals.� High definition E.T.U. (Easy to Use) multifunction monitor

incorporating:ClockMaintenance programmeSelf diagnosis systemTravel speedEngine RPM

For operator convenience, most of the major operatingcontrols are located on the joysticks.Forward and reverse movements are easily controlledby the accelerator pedal.

2 wheels 4 wheels Crab

Both machines are equipped with a two gear range transmission.The maximum travel speed is increased to 33 km/h, to reduce on roaddown time (if requested by local laws, top speed can be limited to 20 Km/h).Their manoeuvrability allows safe and accurate movements.

Machine outstanding manoeuvrability� 2 wheel steering� 4 wheel steering (with the possibility to choose: 2 wheel steering

only; 4 wheel double steering for minimum turning circle diameterand crab steering for diagonal movement).

Modular frame allows the assembly of all possible chassis configurations,according to customer requests:

Machine total flexibility in applications� rear blade� rear stablilisers� front blade and rear stabilisers� four stabilisers

Full stabilisers and blade independenceThe stabilisers and blade are fully independent (front/rear and left/right), controlledby the boom joystick and easily selectable by switches.Right hand side spacious tool box under the steps is standard.

� Turning circle diameterMH2.6 MH3.6

2 wheel steering 12.6 m 12.5 m4 wheel steering 7.7 m 8.4 m

MH2.6/3.6

4

Three wide, seagull wing type, side panels with gas springs, allow excellent all round maintenance and serviceability ofalmost all main components from ground level.An extremely accurate layout of all components for easy and time saving maintenance procedures. Some components areconveniently remotely positioned and the engine oil filter is mounted in vertical position to avoid oil spillage.

Fuel and air filters check.Oil filter in vertical position.

Diesel tank with level indicator.Electric fuel pump and windscreen washerreservoir.

EASY MAINTENANCE

5

MH2.6 MH3.6Net flywheel power (ISO 14396) 74 kW/99 hp 84 kW/113 hpGoverned rpm 2100 2000Make and model CNH 445TA/MLB CNH 445TA/MLLType: diesel 4-stroke,

direct injection,turbocharged(MH3.6 with intercooler)

Displacement (liter) 4.5 4.5Number of cylinders 4 4Bore x stroke (mm) 104 x 132 104 x 132Electronic engine rpm control, dial type.Auto-Idling selector returns engine to minimum rpm when activated.-15° outside temperature start as standard equipment (-25° optional).The engines complie with 97/68/EC Standards Tier 3A.

Voltage .........................................................................................24 VAlternator .....................................................................................70 AStarter motor...............................................................................4 kWStandard maintenance-free batteries .................................................2Capacity...................................................................................100 Ah

Hydraulic circuit, load sensing closed centre type for perfectcontrollability and simultaneity of all movements.New generation A.I. (Artificial Intelligence) on-board computerA.P.S. (Automatic Priority System) device.Swing pressure control for outstanding controllability and high operatorcomfort in upperstructure acceleration/stop.Flow pump saving and shockless system circuits to minimise oil atdischarge and to ensure perfectly homogeneous movements.High definition E.T.U. (Easy to Use) multi-function monitor incorporating:- Clock- Maintenance programme- Self Diagnosis System- Engine rpm- Travel speed

Two-directional crusher/hammer system (optional)MH2.6 MH3.6

Main pump:One variable displacement, axial pistons pump.Maximum delivery (l/min) 151 182Piloting circuit gear type pumpMaximum pressure (MPa) 4.0 4.0

Maximum operating pressure:Equipment/travel (MPa) 35.0 35.0Swing (MPa) 19.0 20.0Hydraulic cylinders double effect- Lift (1) - bore x stroke (mm) 110 x 700 145x740- Penetration (1) - bore x stroke (mm) 95 x 875 110 x 1060- Bucket (1) - bore x stroke (mm) 70 x 800 95 x 875- Positioning (1) bore x stroke (mm) 105 x 600 120 x 680Boom foot swing (1) (mm) 95 x 600 95 x 600

Type .......................................hydrostatic, two-speed, 4 wheels driveFinal drive .................................................oil bath, planetary reduction

MH2.6 MH3.6Max gradeability 84% 80%Maximum travel speed (field) (km/h) 11 11Maximum travel speed (road) (km/h) 33 33Maximum drawbar pull (field) (kN) 62 79According to operator choice the front axle can be automatically blockedwhen the working brake pedal is applied.

The swing function is operated by the main hydraulic Load Sensingcircuit with an integrated automatic priority system coupled with swingmotor reducer and automatic static brake:

MH2.6 MH3.6Swing speed (rpm) 8.0 8.3Swing torque (kNm) 23.0 26.0

Axles complete with oil bath disc brakes.Rigid steering rear axle.Oscillating steering front axle oscillation..........................................±7°The front axle can be locked hydraulically in any position: safety valveslock the axle in case of a breakdown.

Service brakes: oil bath disc type.Work brake: acts on service brakes and locks front axle oscillation.Parking brake: spring type mechanical acting on rear service brake.Emergency brake: double braking circuit and automatic brake actuationwith the engine shut down.

Type.........................................................ORBITROL with safety valvePump....................................................................................gear type

- 2 wheel steering- 4 wheel steering (with the possibility to choose: 2 wheel steering only;4 wheel double steering for minimum turning circle diameter and crabsteering for diagonal movement).

MH2.6 MH3.64 wheels 500/45-20 600/40-22.58 wheels with twinning rings 8.25-20 10.00-20

MH2.6 MH3.6Engine oil (liter) 13 13Cooling circuit (liter) 22 22Fuel tank (liter) 128 162Hydraulic tank (liter) 94 110Swing gear (liter) 3 3

SPECIFICATIONSENGINE TIER 3A

ELECTRICAL SYSTEM

HYDRAULIC SYSTEM

SWING

AXLES

BRAKES

STEERING SYSTEM

TYRES

CAPACITIES

TRANSMISSION

6

MSTANDARDEQUIPMENT

OPTIONS

SAE CAPACITY WIDTH WEIGHTB U C K E T S MH2.6

� 2 wheel steering

� 6 selectable gears; maximum travel speed 33 Km/h

� Automatic axle locking system

� Automatic battery main switch (coupled to ignition key)

� Centralised control of blade and stabilisers on right joystick

� Consoles adjustable for height and length

� Direct injection with turbo charger (charge air cooling on NH3.6)

� Driver suspension seat individually adjustable for height and incline

� Encased ball bearing slew ring with long-life lubrication

� Engine and pump monitoring by power limit control

� Ergonomic design of arm rests and foot pedals

� Forward/Reverse shifting on accelerator

� Hydraulic servo control

� Hydraulic system provision for hammer and shears

� Independent control of blade and each stabiliser

� Large toolbox under the right step

� LCD with integrated error diagnosis function

� Noise-insulated and flexibly mounted cabin

� Patented safety valves for hoist mode

� Pump Management System

� Robust, shielded arc-welded, modular chassis in box section design

� Safety load hook on bucket linkage

� Single pump hydraulic load sensing system with two service pumps

� Steering column incline infinitely variable

� Sun blinds, transparent roof and rain protection

� Swing drive with low-wearing disc brake

� Tinted safety glazing all around, full up and over windscreen

� Travel and swing hydrostatic braking

� Water-cooled, low-consumption and low-exhaust compliant

to EU directive

� 20 km/h forward speed

� 4 wheel steering

� Air conditioning

� Biodegradable oil

� Cold starting kit

� Dozer blade with hydraulic parallel guidance

� Electric diesel filling system

� FOPS protection for cab

� Front guard

� Piping for hammer and shears

� Radio with 12 V electrical auxiliary supply in cab

� Rotating beacon

� Single or twin tyres

� Stabilisers with large, lockable pads

� Transport holder for clamshell grab

0.10 m3 350 mm 95 kg

0.14 m3 450 mm 110 kg

0.19 m3 600 mm 130 kg

0.24 m3 700 mm 140 kg

0.28 m3 800 mm 145 kg

SAE CAPACITY WIDTH WEIGHTB U C K E T S MH3.6

0.23 m3 500 mm 195 kg

0.30 m3 600 mm 210 kg

0.36 m3 700 mm 230 kg

0.43 m3 800 mm 245 kg

0.50 m3 900 mm 270 kg

0.57 m3 1000 mm 285 kg

Note: standard and optional equipment may vary by country. Consult your NEW HOLLAND dealer for specific details.

7

MH2.6

*

**

**

DIMENSIONS

* Machine equipped with dipper ..................................................................................................................................................1850 mm** Machine equipped with dipper ..................................................................................................................................................2200 mm

8

MH3.6

*

**

**

DIMENSIONS

* Machine equipped with dipper ..................................................................................................................................................2000 mm** Machine equipped with dipper ..................................................................................................................................................2350 mm

9

A

B

A (mm) B (mm) kg A (mm) B (mm) kg A (mm) B (mm) kg A (mm) B (mm) kgMH2.6

A (mm) B (mm) kg A (mm) B (mm) kg A (mm) B (mm) kg A (mm) B (mm) kgMH3.6

MH2.6 MH3.61850 2200 2000 2350

DIMENSIONS AND WEIGHTS

REAR BLADE REAR STABILISERS FRONT BLADE + REAR STAB. 4 STABILISERS

Dipperstick 1850 mm

Dipperstick 2200 mm

REAR BLADE REAR STABILISERS FRONT BLADE + REAR STAB. 4 STABILISERS

Dipperstick 2000 mm

Dipperstick 2350 mm

DIGGING PERFORMANCES

A Max. digging reach mm

A’ Max. digging reach at ground level mm

B Max. digging depth mm

B’ Max. depth of cut for 2440 mm level bottom mm

C Max. digging height mm

D Max. loading height mm

E Min. front swing radius mm

F Max. digging depth of vertical wall mm

Bucket breakout force (350 bar) daN

Stick crowd force (350 bar) daN

DIPPERSTICK

7941 8282

7743 8095

3951 4298

3793 4151

8066 8397

6147 6490

2959 3189

2138 2403

4600 4600

4530 4010

8668 9008

8474 8824

4491 4838

4352 4708

8759 9080

6201 6510

3174 3378

2570 2841

7300 7300

6290 5670

6970 3025 9550 6940 3025 9400 6940 3025 9950 6940 3025 9800

7340 3025 9600 7310 3025 9450 7310 3025 10000 7310 3025 9850

7730 3085 12050 7665 3085 11850 7665 3085 12550 7665 3085 12350

8095 3085 12100 8030 3085 11900 8030 3085 12600 8030 3085 12400

10

MH2.6LIFTING CAPACITYTRIPLE ARTICULATION

DIPPERSTICK 1850 mmREAR BLADE / UP

HEIGHTFront Side Front Side Front Side Front Side

REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.9* 2.3 2.0 1.5 1.7 1.3 5.02.9* 2.3 2.0 1.5 1.2 0.9 1.1 0.8 6.32.8 2.1 1.9 1.4 1.2 0.9 1.0 0.7 6.9

1.8 1.3 1.2 0.9 0.9 0.7 7.12.4 1.7 1.7 1.2 1.1 0.8 0.9 0.7 6.92.4 1.8 1.7 1.2 1.1 0.8 1.0* 0.8 6.2

1.2 1.2 1.2 1.2 4.7

AT MAX. REACHREACH

DIPPERSTICK 1850 mmFOUR STABILISERS / DOWN


REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.9* 2.4 2.5* 1.6 1.8* 1.3 5.02.9* 2.4 2.4* 1.6 2.0* 1.0 1.5* 0.9 6.34.0* 2.2 2.8* 1.5 2.1* 1.0 1.5* 0.8 6.9

3.2* 1.4 2.1* 0.9 1.6* 0.7 7.14.0* 1.9 3.0* 1.3 1.9* 0.9 1.4* 0.7 6.92.6* 1.9 2.1* 1.3 1.2* 0.9 1.0* 0.9 6.2

1.2 1.2 1.2 1.2 4.7

AT MAX. REACHREACH

DIPPERSTICK 1850 mmFRONT BLADE - REAR STABILISERS / DOWN


REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.9* 2.9 2.5* 1.9 1.8* 1.6 5.02.9* 2.9 2.4* 1.9 2.0* 1.2 1.5* 1.1 6.34.0* 2.6 2.8* 1.8 2.1* 1.2 1.5* 0.9 6.9

3.2* 1.7 2.1* 1.1 1.6* 0.9 7.14.0* 2.3 3.0* 1.6 1.9* 1.1 1.4* 0.9 6.92.6* 2.3 2.1* 1.6 1.2* 1.1 1.0* 1.0 6.2

1.2 1.2 1.2 1.2 4.7

AT MAX. REACHREACH

DIPPERSTICK 1850 mmREAR STABILISERS / DOWN


REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.9* 2.3 2.5* 1.5 1.8* 1.2 5.02.9* 2.3 2.4* 1.5 2.0* 0.9 1.5* 0.8 6.34.0* 2.1 2.8* 1.4 2.1* 0.9 1.5* 0.7 6.9

3.2* 1.3 2.1* 0.8 1.6* 0.7 7.14.0* 1.7 3.0* 1.2 1.9* 0.8 1.4* 0.7 6.92.6* 1.8 2.1* 1.2 1.2* 0.8 1.0* 0.8 6.2

1.2 1.2 1.2 1.2 4.7

AT MAX. REACHREACH

DIPPERSTICK 1850 mmREAR BLADE / DOWN


REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.9* 2.7 2.5* 1.8 1.8* 1.5 5.02.9* 2.7 2.4* 1.8 2.0* 1.1 1.5* 1.0 6.34.0* 2.5 2.8* 1.7 2.1* 1.1 1.5* 0.8 6.9

3.2* 1.5 2.1* 1.0 1.6* 0.8 7.14.0* 2.1 3.0* 1.5 1.9* 1.0 1.4* 0.8 6.92.6* 2.1 2.1* 1.5 1.2* 1.0 1.0* 1.0 6.2

1.2 1.2 1.2 1.2 4.7

AT MAX. REACHREACH



REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.0 1.5 1.4 1.1 5.52.0 1.5 1.3 0.9 1.0 0.8 6.7

2.8 2.1 1.9 1.4 1.2 0.9 0.9 0.6 7.31.8 1.3 1.2 0.9 0.8 0.6 7.5

2.4 1.7 1.7 1.2 1.1 0.8 0.9 0.6 7.22.4 1.7 1.7 1.2 1.1 0.8 1.0 0.7 6.6

1.2 1.2 1.2 1.2 4.9

AT MAX. REACHREACH



REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.2* 1.6 1.5* 1.1 5.52.2* 1.6 1.9 1.0 1.3* 0.8 6.7

3.6 2.3 2.7* 1.5 2.0* 1.0 1.2* 0.7 7.33.2* 1.4 2.1* 0.9 1.3* 0.7 7.5

4.4* 1.8 3.1* 1.3 2.0* 0.9 1.3* 0.7 7.23.1* 1.9 2.4* 1.3 1.5* 0.9 1.0* 0.8 6.6

1.2 1.2 1.2 1.2 4.9

AT MAX. REACHREACH



REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.2* 1.9 1.5* 1.4 5.52.2* 1.9 1.9 1.2 1.3* 1.0 6.7

3.6* 2.7 2.7* 1.8 2.0* 1.2 1.2* 0.8 7.33.2* 1.7 2.1* 1.1 1.3* 0.8 7.5

4.4* 2.3 3.1* 1.6 2.0* 1.1 1.3* 0.8 7.23.1* 2.3 2.4* 1.6 1.5* 1.1 1.0* 1.0 6.6

1.2 1.2 1.2 1.2 4.9

AT MAX. REACHREACH



REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.2* 1.5 1.5* 1.1 5.52.2* 1.5 1.9 0.9 1.3* 0.8 6.7

3.6* 2.1 2.7* 1.4 2.0* 0.9 1.2* 0.6 7.33.2* 1.3 2.1* 0.8 1.3* 0.6 7.5

4.4* 1.7 3.1* 1.2 2.0* 0.8 1.3* 0.6 7.23.1* 1.7 2.4* 1.2 1.5* 0.8 1.0* 0.7 6.6

1.2 1.2 1.2 1.2 4.9

AT MAX. REACHREACH



REACH�3.5 m 4.5 m 6.0 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.2* 1.8 1.5* 1.3 5.52.2* 1.8 1.9 1.1 1.3* 0.9 6.7

3.6* 2.5 2.7* 1.7 2.0* 1.1 1.2* 0.8 7.33.2* 1.6 2.1* 1.0 1.3* 0.7 7.5

4.4* 2.1 3.1* 1.5 2.0* 1.0 1.3* 0.8 7.23.1* 2.1 2.4* 1.5 1.5* 1.0 1.0* 0.9 6.6

1.2 1.2 1.2 1.2 4.9

AT MAX. REACHREACH

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Valuemarked with an asterisk are limited by the hydraulic system.

11

MH3.6LIFTING CAPACITYTRIPLE ARTICULATION



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.6 2.3 1.6 1.5 5.72.6 2.3 1.5 1.4 1.1 1.1 6.92.4 2.1 1.5 1.4 1.0 0.9 7.42.1 1.9 1.4 1.3 0.9 0.8 0.9 0.8 7.62.0 1.8 1.3 1.2 1.0 0.9 7.32.0 1.8 1.3 1.2 1.1 1.0 6.71.8 1.6 1.8 1.6 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

4.1* 2.5 2.5* 1.6 5.74.3* 2.4 3.5 1.5 2.2* 1.1 6.95.3* 2.3 3.4 1.5 2.2* 1.0 7.45.3 2.0 3.3 1.4 2.4 0.9 2.3 0.9 7.65.2 1.9 3.3 1.3 2.4 0.9 7.34.6* 1.9 3.1* 1.3 2.2* 1.1 6.72.5* 1.7 2.5* 1.7 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

4.1* 2.9 2.5* 1.9 5.74.3* 2.9 3.6* 1.8 2.2* 1.4 6.95.3* 2.7 3.6 1.8 2.2* 1.2 7.45.5 2.4 3.5 1.7 2.5 1.1 2.3* 1.1 7.65.4 2.3 3.4 1.6 2.5 1.1 7.34.6* 2.3 3.1* 1.5 2.2* 1.3 6.72.5* 2.1 2.5* 2.1 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

4.1* 2.3 2.5* 1.5 5.74.3* 2.3 3.2 1.4 2.2* 1.0 6.95.1 2.1 3.1 1.4 2.2* 0.9 7.44.8 1.9 3.0 1.3 2.1 0.8 2.1 0.8 7.64.7 1.8 3.0 1.2 2.2 0.9 7.34.6* 1.8 3.0 1.2 2.2* 1.0 6.72.5* 1.6 2.5* 1.6 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

4.1* 2.7 2.5* 1.7 5.74.3* 2.6 3.6* 1.6 2.2* 1.2 6.95.3* 2.4 3.8* 1.7 2.2* 1.0 7.46.3* 2.2 3.9 1.5 2.7 1.0 2.3* 1.0 7.66.0* 2.1 3.8 1.5 2.6* 1.0 7.34.6* 2.1 3.1* 1.4 2.2* 1.2 6.72.5* 1.9 2.5* 1.9 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

2.3 2.4 1.6 1.4 1.4 1.3 6.22.6 2.3 1.6 1.4 1.1 1.0 7.22.4 2.1 1.5 1.3 1.0 0.9 0.9 0.8 7.82.2 1.9 1.4 1.2 1.0 0.8 0.9 0.8 7.92.0 1.8 1.3 1.2 0.9 0.8 0.9 0.8 7.72.0 1.7 1.3 1.1 1.0 0.9 7.11.8 1.6 1.8 1.6 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

3.7* 2.5 2.8* 1.5 2.1* 1.4 6.23.9* 2.5 3.4* 1.5 1.9* 1.0 7.24.9* 2.3 3.5 1.4 2.4 0.9 1.8* 0.9 7.85.4 2.0 3.3 1.3 2.3 0.9 1.9* 0.8 7.95.2 1.9 3.3 1.3 2.3 0.9 2.2* 0.9 7.75.0* 1.9 3.2 1.2 2.2* 1.0 7.12.5* 1.7 2.5* 1.7 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

3.7* 2.9 2.8* 1.8 2.1* 1.6 6.23.9* 2.9 3.4* 1.8 1.9* 1.2 7.24.9* 2.7 3.6 1.7 2.5 1.1 1.8* 1.1 7.85.6 2.5 3.5 1.6 2.4 1.1 1.9* 1.0 7.95.4 2.3 3.4 1.5 2.4 1.1 2.2* 1.1 7.75.0* 2.3 3.3* 1.5 2.2* 1.2 7.12.5* 2.1 2.5* 2.1 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

3.7* 2.4 2.8* 1.4 2.1* 1.3 6.23.9* 2.3 3.2 1.4 1.9* 0.9 7.24.9* 2.1 3.1 1.3 2.2 0.9 1.8* 0.8 7.84.9 1.9 3.0 1.2 2.1 0.8 1.9* 0.8 7.94.7 1.7 2.9 1.1 2.1 0.8 2.0 0.8 7.74.7 1.7 2.9 1.1 2.2* 0.9 7.12.5* 1.6 2.5* 1.6 4.9

AT MAX. REACHREACH



REACH�4.5 m 6.0 m 7.5 m

+6.0 m+4.5 m+3.0 m+1.5 m

0.0 m-1.5 m-2.5 m

3.7* 2.7 2.8* 1.6 2.1* 1.5 6.23.9* 2.7 3.4* 1.6 1.9* 1.1 7.24.9* 2.5 3.7* 1.5 2.7* 1.0 1.8* 1.0 7.86.1* 2.2 3.9 1.4 2.7 1.0 1.9* 1.0 7.96.2* 2.1 3.8 1.4 2.7 1.0 2.2* 0.9 7.75.0* 2.1 3.3* 1.4 2.2* 1.1 7.12.5* 1.9 2.5* 1.9 4.9

AT MAX. REACHREACH

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static tipping load. Valuemarked with an asterisk are limited by the hydraulic system.

Printed on recycled paperCoC-FSC 000010 CQ Mixed sources

www.newholland.com

NEW HOLLAND.THE POWER OF A GLOBAL BRAND

The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. company mayat any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the product described in this brochure. Illustrationsdo not necessarily show products in standard conditions. The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximateonly and are subject to variations within normal manufactoring techniques.

Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A.Printed in Italy - LEADER Firenze - Cod. 73301 428GB - Printed 02/08

AT YOUR OWN DEALERSHIP

New Holland is a global brand with a key position in the Construction Equipment business.It supplies a complete range of 13 product lines and 80 basic models split into Compact lineand Heavy line. It operates in all the main markets, such as Europe, North and Latin America,Africa, Asia and Middle East with the same technology and under the same logo and brand.It manufactures durable, safe and productive machines aimed at supporting customers indeveloping their own business.Dealers are company partners. They play an important role tosupport the brand in their territories through intense professional relationship with Customers.New Holland is reinforced by its global alliance with Kobelco: world leader in hydraulic excavatortechnology.

mh2.6 mh3.6 0.10 - 0.28 m - hydrex s.r.o.5 mh2.6 mh3.6 net flywheel power (iso 14396) 74 kw/99 hp 84...

Documents