microgen programming instructions - cancer clinic · open port co ml 9 is successful !...

3
Make sure MicroGen is turned off and plugged into your computer’s USB port. Quickly press the power button on MicroGen 5 times. The middle LED will turn on, indicating MicroGen is in programming mode. Select Update Firmware from the top menu. 1. Select the correct com port.

Upload: others

Post on 31-Jul-2021

25 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MicroGen Programming Instructions - Cancer Clinic · Open Port CO Ml 9 is Successful ! Communication settings is: 1 15201JnßI Open Look in: Micro firmware Programmer Cancel Recent

Make sure MicroGen is turned off and plugged into your computer’s USB port. Quickly press the power button on MicroGen 5 times. The middle LED will turn on, indicating MicroGen is in programming mode. Select Update Firmware from the top menu.

1. Select the correct com port.

Page 2: MicroGen Programming Instructions - Cancer Clinic · Open Port CO Ml 9 is Successful ! Communication settings is: 1 15201JnßI Open Look in: Micro firmware Programmer Cancel Recent

2. Open the port.

3. Open the firmware *.bin file.

Page 3: MicroGen Programming Instructions - Cancer Clinic · Open Port CO Ml 9 is Successful ! Communication settings is: 1 15201JnßI Open Look in: Micro firmware Programmer Cancel Recent

4. Run.

The firmware is written in several steps, and takes about a minute.