microsoft 70-412 exam questions & answers · 2019-11-29 · exam - from 70-412 file question 1...

Microsoft 70-412 Exam Questions & Answers

Number: 70-412Passing Score: 700Time Limit: 100 minFile Version: 23.4

http://www.gratisexam.com/

Microsoft 70-412 Exam Questions & Answers

Exam Name: Configuring Advanced Windows Server 2012 Services

For Full Set of Questions please visit: http://www.passguide.com/70-412.html

Exam - from 70-412 file

QUESTION 1Your network contains three Active Directory forests. Each forest contains an Active Directory RightsManagement Services (AD RMS) root cluster. All of the users in all of the forests must be able to accessprotected content from any of the forests. You need to identify the minimum number of AD RMS trusts required.How many trusts should you identify?

A. 2B. 3C. 4D. 6

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2Your company has a main office and a branch office. An Active Directory site exists for each office.

The network contains an Active Directory forest named contoso.com. The contoso.com domain contains threemember servers named Server1, Server2, and Server3. All servers run Windows Server 2012.

In the main office, you configure Server1 as a file server that uses BranchCache.

In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.

You are creating a Group Policy for the branch office site.

In the branch office, you need to configure the client computers that run Windows 8 to use Server2 and Server3as BranchCache.

Hot Area:

Correct Answer:

Section: (none)Explanation


http://technet.microsoft.com/en-us/library/ee649153(v=ws.10).aspxhttp://blogs.technet.com/b/wsnetdoc/archive/2012/06/01/highlighting-branchcache-hosted-cache-mode-in-windows-server-2012.aspx

QUESTION 3In This Exam i Added New Questions

Wish Good Luck All

For My Egyptian Family

Exam Will Only Cost 300 L.E

Correct Answer: Section: (none)Explanation


QUESTION 4Your network contains an Active Directory domain named contoso.com.

A previous administrator implemented a Proof of Concept installation of Active Directory Rights ManagementServices (AD RMS).

After the proof of concept was complete, the Active Directory Rights Management Services server role wasremoved.

You attempt to deploy AD RMS.

During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS ServiceConnection Point (SCP) was found.

You need to remove the existing AD RMS SCP.

A. Certification AuthorityB. Authorization ManagerC. ADSI EditD. Active Directory Domains and Trusts

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

http://social.technet.microsoft.com/wiki/contents/articles/710.the-ad-rms-service-connection-point-en-us.aspx

QUESTION 5Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office.

All domain controllers run Windows Server 2012. The domain contains two domain controllers. The domaincontrollers are configured as shown in the following table.

DC1 hosts an Active Directory-integrated zone for contoso.com.

You add the DNS Server server role to DC2.

You discover that the contoso.com DNS zone fails to replicate to DC2.

You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.

You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.

Which tool should you use?

A. DnslintB. A DNS ManagerC. Active Directory Users and ComputersD. Dnscmd

Correct Answer: ASection: (none)Explanation

Explanation/Reference:http://support.microsoft.com/kb/321045/

QUESTION 6Your network contains an Active Directory domain named contoso.com. The domain contains domaincontrollers that run either Windows Server 2003, Windows Server 2008 R2, or Windows Server 2012.

You plan to implement a new Active Directory forest. The new forest will be used for testing and will be isolatedfrom the production network.

In the test network, you deploy a server named Server1 that runs Windows Server 2012.

You need to configure Server1 as a new domain controller in a new forest named contoso.test.The solution must meet the following.

Select two options below.

A. There is no need to set the Forest Functional Level.B. Set Forest Functional Level to Windows 2003.C. Set Forest Functional Level to Windows 2008D. Set Forest Functional Level to Windows 2008 R2.E. Set Forest Functional Level to Windows 2012.F. There is no need to set the Domain Functional Level.G. Set Domain Functional Level to Windows 2003.H. Set Domain Functional Level to Windows 2008I. Set Domain Functional Level to Windows 2008 R2.J. Set Domain Functional Level to Windows 2012.

Correct Answer: BGSection: (none)Explanation

Explanation/Reference:Explanation: * When you deploy AD DS, set the domain and forest functional levels to the highest value thatyour environment can support. This way, you can use as many AD DS features as possible. For example, if youare sure that you will never add domain controllers that run Windows Server 2003 to the domain or forest,select the Windows Server 2008 functional level during the deployment process. However, if you might retain oradd domain controllers that run Windows Server 2003, select the Windows Server 2003 functional level.

When you deploy a new forest, you are prompted to set the forest functional level and then set the domainfunctional level. You cannot set the domain functional level to a value that is lower than the forest functionallevel.

Reference: Understanding Active Directory Domain Services (AD DS) Functional Levels

QUESTION 7You have a server named Server 1 that runs Windows Server 2012. Server1 has five network adapters. Threeof the network adapters are connected to a network named LAN1. The two other network adapters areconnected to a network named LAN2. You create a network adapter team named Team1 from two of theadapters connected to LAN1. You create a network adapter team named Team2 from the two adaptersconnected to LAN2. A company policy states that all server IP addresses must be assigned by using a reservedaddress in DHCP. You need to identify how many DHCP reservations you must create for Server1. How manyreservations should you identify?

A. 2B. 3


C. 5D. 7

Correct Answer: BSection: (none)Explanation

Explanation/Reference:3 adapter on LAN 12 adapters on LAN 2

2 adapters on LAN 1 used in a team, so that's 3 - 2 leaving 1.2 adapaters on LAN 2 used in a team, so that's 2 - 2 leaving 0.

1 team on LAN 1 + 1 team on LAN 2 + remaining adapter on LAN 1 = 3.

QUESTION 8Your network contains an Active Directory domain named contoso.com. The domain contains servers namedServer1 and Server2 that run Windows Server 2012. Server1 has the IP Address Management (IPAM) Serverfeature installed. You install the IPAM client on Server2. You open Server Manager on Server2 as shown in theexhibit. (Click the Exhibit button.)

You need to manage IPAM from Server2. What should you do first?

A. On Server2, open Computer Management and connect to Server1.B. On Server1, add the Server2 computer account to the IPAM ASM Administrators group.C. On Server2, add Server1 to Server Manager.D. On Server1, add the Server2 computer account to the IPAM MSM Administrators group.



QUESTION 9Your network contains an Active Directory domain named contoso.com. The domain contains four servers. Theservers are configured as shown in the following table.

You plan to deploy an enterprise certification authority (CA) on a server named Server5. Server5 will be used toissue certificates to domain-joined computers and workgroup computers. You need to identify which server youmust use as the certificate revocation list (CRL) distribution point for Server5. Which server should you identify?

A. Server1B. Server3C. Server4D. Server2



We cannot use AD DS because workgroup computers must access CRL distribution point

QUESTION 10Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Federation Services (AD FS) serverrole installed. Adatum.com is a partner organization. You are helping the administrator of adatum.com set up afederated trust between adatum.com and contoso.com. The administrator of adatum.com asks you to provide afile containing the federation metadata of contoso.com. You need to identify the location of the federationmetadata file. Which node in the AD FS console should you select? To answer, select the appropriate node inthe answer area

Hot Area:

Correct Answer:


Explanation/Reference:http://blogs.msdn.com/b/card/archive/2010/06/25/using-federation-metadata-to-establish-a-relying-party-trust-in-ad-fs-2-0.aspx

QUESTION 11Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Both servershave the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connectto each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need toensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs. Whatshould you do?

A. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.B. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for

VM1.C. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.D. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for

VM1.


Explanation/Reference:You first have to enable replication on the Replica server--Server1--by going to the server and modifying the"Replication Configuration" settings under Hyper-V settings. You then. go to VM1--which presides on Server2--and run the "Enable Replication" wizard on VM1.

QUESTION 12Your network contains an Active Directory domain named contoso.com. The domain contains three serversnamed Server1, Server2, and Server3 that run Windows Server 2012. All three servers have the Hyper-Vserver role installed and the Failover Clustering feature installed. Server1 and Server2 are nodes in a failovercluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-VReplica Broker role installed. The Hyper-V Replica Broker currently runs on Server1. Server3 currently has novirtual machines. You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replicaserver for Cluster1. Which two tools should you use? (Each correct answer presents part of the solution.Choose two.)

A. The Hyper-V Manager console connected to Server3B. The Hyper-V Manager console connected to Server2C. The Failover Cluster Manager console connected to Cluster1D. The Failover Cluster Manager console connected to Server3E. The Hyper-V Manager console connected to Server1

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:http://technet.microsoft.com/en-us/library/jj134240.aspx

QUESTION 13You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012. You needto ensure that users can access previous versions of files that are shared on Server1 by using the PreviousVersions tab. Which tool should you use?

A. wbadminB. DiskpartC. StorreptD. Vssadmin



QUESTION 14Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You have a folder named Folder1 on Server1 that containsapplication data. You plan to provide continuously available access to Folder1. You need to ensure that all ofthe nodes in Cluster1 can actively respond to the client requests for Folder1. What should you configure?

A. Affinity - NoneB. Affinity - SingleC. The cluster quorum settings

D. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server

Correct Answer: LSection: (none)Explanation

Explanation/Reference:http://technet.microsoft.com/en-us/library/hh831349.aspx

Scale-Out File Server for application data (Scale-Out File Server) This clustered file server is introduced inWindows Server 2012 and lets you store server application data, such as Hyper-V virtual machine files, on fileshares, and obtain a similar level of reliability, availability, manageability, and high performance that you wouldexpect from a storage area network. All file shares are online on all nodes simultaneously. File sharesassociated with this type of clustered file server are called scale-out file shares. This is sometimes referred toas active-active.

QUESTION 15Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theNetwork Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster namedCluster1. Cluster1 hosts a secure web application named WebApp1. WebApp1 saves user state informationlocally on each node. You need to ensure that when users connect to WebApp1, their session state ismaintained. What should you configure?

A. Affinity - NoneB. Affinity - SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible owner

J. The preferred ownerK. Quick migrationL. The Scale-Out File Server


Explanation/Reference:http://technet.microsoft.com/en-us/library/bb687542.aspx

QUESTION 16Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.To which group on Server2 should you add Tech1? To answer, select the appropriate group in the answer area.

Hot Area:

Correct Answer:


Explanation/Reference:http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29012

QUESTION 17You have a server named Server2 that runs Windows Server 2012. You have storage provisioned on Server2as shown in the exhibit. (Click the Exhibit button.) You need to configure the storage so that it appears inWindows Explorer as a drive letter on Server1. Which three actions should you perform in sequence? Toanswer, move the three appropriate actions from the list of actions to the answer area and arrange them in thecorrect order.

Select and Place:

Correct Answer:


Explanation/Reference:http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-of-iscsi-target-in-windows-server-2012.aspx

QUESTION 18Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1. All servers run Windows Server 2012. All domain user accounts have the Division attributeautomatically populated as part of the user provisioning process. The Support for Dynamic Access Control andKerberos armoring policy is enabled for the domain. You need to control access to the file shares on Server1based on the values in the Division attribute and the Division resource property. Which three actions should youperform in sequence? To answer, move the three appropriate actions from the list of actions to the answer areaand arrange them in the correct order.

Select and Place:

Correct Answer:


Explanation/Reference:http://technet.microsoft.com/de-de/library/hh846167.aspx

First create a claim type for the property, then create a reference resource property that points back to theclaim. Finally set the classification value on the folder.

QUESTION 19Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. The domain contains two servers named Server1and Server2 that run Windows Server 2012. Both servers have the DHCP Server server role installed. Server1is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addressesto the client computers in the main office site. Server2 provides IPv4 addresses to the client computers in thebranch office site. You need to ensure that if either Server1 or Server2 are offline, the client computers can stillobtain IPv4 addresses. The solution must meet the following requirements:· The storage location of the DHCP databases must not be a single point of failure. · Server1 must provide IPv4addresses to the client computers in the branch office site only if Server2 is offline.· Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline.Which configuration should you use?

A. Load sharing mode failover partnersB. Hot standby mode failover partnersC. A Network Load Balancing (NLB) clusterD. A failover cluster



http://blogs.technet.com/b/teamdhcp/archive/2012/09/03/dhcp-failover-hot-standby-mode.aspx

QUESTION 20Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 Both servers have the IP Address Management (IPAM) Server feature installed.You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.To which group on Server2 should you add Tech1.

A. IPAM MSM AdministratorsB. IPAM AdministratorsC. winRMRemoteWMIUsers_D. Remote Management Users



QUESTION 21You manage an environment that has many servers. The servers run Windows Server 2012 and use iSCSIstorage. Administrators report that it is difficult to locate available iSCSI resources on the network. You need toensure that the administrators can locate iSCSI resources on the network by using a central repository.Which feature should you deploy?

A. The iSNS Server service featureB. The iSCSI Target Storage Provider featureC. The Windows Standards-Based Storage Management featureD. The iSCSI Target Server role service


Explanation/Reference:http://technet.microsoft.com/en-us/library/cc772568.aspx

QUESTION 22You have a server named Server1 that runs Windows Server 2012. You download and install the MicrosoftOnline Backup Service Agent on Server1. You need to ensure that you can configure an online backup fromWindows Server Backup. What should you do first?

A. From a command prompt, run wbadmin.exe enable backup.B. From Windows Server Backup, run the Register Server Wizard.C. From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent.D. From Computer Management, add the Server1 computer account to the Backup Operators group.



QUESTION 23Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the Hyper-V server role installed. You plan to replicate virtualmachines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer(SSL). You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part ofthe solution. Choose two.)

A. Server AuthenticationB. KDC AuthenticationC. Kernel Mode Code SigningD. IP Security end systemE. Client Authentication

Correct Answer: AESection: (none)Explanation

Explanation/Reference:http://blogs.technet.com/b/virtualization/archive/2012/03/13/hyper-v-replica-certificate-requirements.aspx

QUESTION 24Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1 that runs Windows Server 2012. You create a user account named User1 in the domain. Youneed to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimizethe number of administrative rights assigned to User1. What should you do?

A. Assign User1 the Back up files and directories user right.B. Add User1 to the Backup Operators group.C. Add User1 to the Power Users group.D. Assign User1 the Back up files and directories user right and the Restore files and directories user right.


Explanation/Reference:Backup Operators have these permissions by default:

However the question explicitly says we need to minimize administrative rights. Since the requirement is forbacking up the data only--no requirement to restore or shutdown--then assigning the "Back up files anddirectories user right" would be the correct. answer.

QUESTION 25You have a datacenter that contains six servers. Each server has the Hyper-V server role installed and runsWindows Server 2012. The servers are configured as shown in the following table.

Host4 and Hosts5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1. Youneed to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To which serverand by which method should you move VM1

A. To Host3 by using a storage migrationB. To Host6 by using a storage migrationC. To Host2 by using a live migrationD. To Host1 by using a quick migration



QUESTION 26Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.What should you configure?

A. Affinity - NoneB. Affinity - SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server



QUESTION 27Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes in Cluster1. You have a folder named Folder1 on Server1 that hosts applicationdata. Folder1 is a folder target in a Distributed File System (DFS) namespace. You need to provide highlyavailable access to Folder1. The solution must support DFS Replication to Folder1. What should youconfigure?

A. Affinity - NoneB. Affinity - SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server

Correct Answer: LSection: (none)Explanation


QUESTION 28You have a file server named Server1 that runs Windows Server 2012. The folders on Server1 are configuredas shown in the following table.

A new corporate policy states that backups must use Microsoft Online Backup whenever possible. You need toidentify which technology you must use to back up Server1. The solution must use Microsoft Online Backupwhenever possible. What should you identify? To answer, drag the appropriate backup type to the correctlocation or locations. Each backup type may be used once, more than once, or not at all. You may need to dragthe split bar between panes or scroll to view content.

Select and Place:

Correct Answer:



QUESTION 29you are employee as a network administrator at abc.com. ABC.com has an active directory domain namedABC.com All servers on the abc.com network have windows server 2012 installed and all workstations havewindows 8 enterprise installed.abc.com has established a remote Active directory site that only host workstations.The Computer accounts forthese workstations have been placed in an organizational unit (OU),named ABCADRemote,which has a grouppolicy object(GPO) associated with it.You are in the process of configuration Branchcahce for the remote Active directory site. You have Alreadyturned Branchcache on.Which of the following actions should you take next_?

A. You Should consider having the set Branchcache HostedServer Cache mode setting configuredB. You Should consider having the set Branchcache Hostedclient Cache mode settting configuredC. You Should consider having the set Branchcache distributed cache mode setting configuredD. You should consider having the set BranchCache disabled cache mode settings configured



QUESTION 30

You are employed as a senior network administrator at ABC.com. ABC.com has an active directory domainnamed ABC.com. all servers on the abc.com network windows server2012 installed.You are currently running a training exercise for junior network administrators.You are discussing thePKISync.ps1 tool.which of the following is true with regards to The PKISync.ps1?

A. it adds a certificate template to the CAB. it asssists administrators in diagnosing replication problems between windows domain controllersC. it is used to display information about the digital certificates that are installed on a directAccess

client,DirectAcces server,or intranet resourceD. it copies objects in the source forest to the target forest.



QUESTION 31You are employed as a network administrator ABC.com ABC.com has an active directory domain namedABC.com.all servers on the ABC.com network have windows server 2012 installed.ABC.com has a server named server1 which is configured as a DHCP server You have created a superscopeon server1 .which of the following describes reason for creating a superscope?(choose all that apply.)

A. To support DHCP clients on a single physical network segment where multiple logical ip networks are used.B. To allow for the sending of network traffic to a group of endpoints destination hosts.C. To support remote DHCP clients located on the far side of DHCP and BOOTP relay agents.D. To provide fault tolerance


Explanation/Reference:http://technet.microsoft.com/en-us/library/cc757614(v=ws.10).aspx

QUESTION 32You are employed as a network administrator at ABC.com ABC.com has an active directory domain namedABC.com all servers including domain controllers on the ABC.com network have windows server 2012installed.ABC.com has its headquarters in London and an office in paris. The London Office has a domain controllernamed server1,which is configured as a writeable domain controller that servers as a Global catalog server anda DNS server. Server1 is configured to host an Active Directory-integrated zone for ABC.comThe Paris office has a Read-Only domain controller (RODC) named server2 which servers as a Global catalogserver.After installing the DNS server role on server2,you want to make sure that the ABC.com zone is replicated toserver2 via active directory replication.Which of the following actions should you take?

A. You should consider making use of Active Directory Sites and Services to Configured replicationB. You should consider making use of replmon.exe to configure replication.C. You should consider making use of repadmin.exe to configure replication

D. You should consider making use of Active Directory Schema To configure replication



QUESTION 33You are emloyed as a network administrator at ABC.com Abc.com has an Active directory domain namedABC.com all servers on the ABC.com network have windows server 2012.The ABC.com domain has two Active Directory sites configured. You want to make use of change notificationconfigure replication between these Active Directory Sites.You have opened DEFAULTIPSITELINK Propertiesto configure the necessary attribute.

Which of the following is the attribute that needs to be configured?

A. The revisiobn attributeB. The Options attributeC. The schedule attribute D. The proxyAddresses attribute



QUESTION 34You are employed as a network administrator at ABC.com ABC.com has an Active Directory domain namedABC.com all servers on the ABC.com network have Windows server 2012 installed.ABC.com has a server named SERVER1 which has been configured to run the HYPER-V server role Server1is configures to host multiple vitrual mahines.When ABC.com acquires a server with a better hardwareconfiguration to SERVER1 you are instructed to relocate the vitrual machines to the new server with as littleinterruptions as possible.

Which of the following actions should you take ? (Choose all that apply.)

A. You should consider exporting the vitrual machines from Server1.B. You should consider running a snapshot backup of the SERVER1.C. You should consider importing the vitrual machine from Server1 to the new server.D. You shoul consider restoring the snapshot backup on the hard drives of the new server.



QUESTION 35You are employed as a network administrator at contoso.com . Contoso.com has an active directory domainnamed contoso.com All servers on the contoso.com network have windows server 2012 installed.

Contoso.com has a server named server1,which is configured as a file server. You have been instructed to

enabled a feature that discovers and eradicates duplication within data without compromising its reliability oraccuracy.

Which of the following actions should you take?

A. You should consider having the Data Deduplication feature enabled.B. You should consider having the Storage Spaces feature enabled.C. You should consider having the Storage Management feature enabled.D. You should consider having the folder redirection feature enabled.


Explanation/Reference:http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-to-data-deduplication-in-windows-server-2012.aspx

QUESTION 36You are employed as a network administrator at contoso.com. contoso.com has a single Active Directorydomain named contoso.com.All servers on the Contoso.com network have Windows server 2012 installed.Contoso.com has two servers,named server1 and server2 which are configured in a two-node fail over cluster.

You are currently configuration the quorum settings for the cluster. You want to make use of a quorum modethat allows each node to vote if it is available and in communication.

Which of the following is the mode you should use?

A. Node MajorityB. Node and Disk MajorityC. Node and File Share MajorityD. No Majority:Disk Only



QUESTION 37You are employed as a network administrator at contoso.com. Contoso.com has a single Active Directorydomain named contoso.com. All servers on the contoso.com network have windows server 2012 installed.You are preparing to install a third-party application on a contoso.com server,named SERVER1.You find that the application is unable to install completely due to its driver not being digitally signed.You want to make sure that the application can be installed succesfully.

Which of the following actions should you take_?

A. You should consider downloading a signed driverB. You should consider having SERVER1 is restored to an earlier dateC. You should consider making use of the Disable Driver Signature Enforcement option from the Advanced

Boot Option.D. You should consider restarting SERVER1 in safe Mode



QUESTION 38You are employed as a senior network administrator at contoso.com.Contoso.com has a single Active DirectoryDomain named contoso.com.All servers on the contoso.com network have windows server 2012 installed.You are running a training exercise for junior network administrator.You are currently discussing the Dnslint.exetool.

Which of the following should this tool be used for ? (Choose all that apply)

A. To help diagnose common DNS name resolution issuesB. For developing scripts for configuring a DNS serverC. To administer the DNS server Service.D. To look for specific DNS record set and sure that they are consistent across multiple DNS servers.E. To verify that DNS records used specifially for Active Directory replication are correctF. To Create and delete zones and resource records.

Correct Answer: ADESection: (none)Explanation

Explanation/Reference:http://support.microsoft.com/kb/321045

QUESTION 39You are employed as a network administrator at ABC.com. ABC.com has an Active Directory domain namedABC.com. All servers on the ABC.com network have Windows server 2012 installed.You have been instructed to configure a custom Windows Recovery Environmen(Windows RE) image thatshould allow for a drive is mapped automatically to a network share in the event that a server is started usingthe image

Which of the following actions should you take?

A. You should consider configuring the startnet.cmd in the image B. You should consider configuring the startup.exe command included in the image.C. You should consider configuring the ntdsutil command included in the image D. You should consider configuring the certutil.exe command included in the image



QUESTION 40You are employed as a senior network administrator at ABC.com . ABC.com has an Active Directory domainnamed ABC.com. All servers on the ABC.com network have windows server 2012 installedYou are currently running a training exercise for junior network administrators.You are discussing the endpointtypes supported by Active Directory Federation Services(AD FS)Which of the following are supported types?(Choose all that apply)

A. SAML WebSSOB. AnonymousC. WS-Federation PassiveD. Client CerticateE. WS-Trust

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:http://technet.microsoft.com/en-us/library/adfs2-help-endpoints(v=ws.10).aspx

QUESTION 41You are employed as a senior network administrator at ABC.com . ABC.com has an Active Directory domainnamed ABC.com. All servers on the ABC.com network have windows server 2012 installedThe ABC.com domain has an Active Directory site configured in London,and an Active Directory site in Newyork. You have been instructed to make sure that the synchronization of account lockout data happens quicker.

A. You should consider editing the options attribute from WANLINK propertiesB. You should consider editing the options attribute from LANLIK propertiesC. You should consider editing the options attribute from the DEFAULTSITELINK propertiesD. You should consider editing the proxyAddressess attribute from the DEFAULTIPSITELINK properties.



QUESTION 42You are employed as a senior network administrator at ABC.com . ABC.com has an Active Directory domainnamed ABC.com. All servers on the ABC.com network have windows server 2012 installed.ABC.com has two servers,named SERVER1 and SERVER2 which are configured in a two-node failovercluster.Server1 includes a folder,named ABCAppData,which is configured as a Distributed File System (DFS)name space folder target.After configuring another two nodes in the failover cluster, you are instructed to make sure that access toABCAppData is highly available. You also have to make sure that application data is replicated to ABCAppDatavia DFS replication.

Which following actions should you take ?

A. You should consider configuring a scale-out File ServerB. You should consider configuring the replication settings for the cluster

C. You should consider configuring a file server for general use D. You should consider configuring the Quorum settings



QUESTION 43Your network contains an Active Directory domain named contoso.com. A previous administrator implementeda Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof ofconcept was complete, the Active Directory Rights Management Services server role was removed.

You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicatingthat an existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMS SCP.


A. ADSI EditB. Active Directory Users and ComputersC. Active Directory Domains and TrustsD. Active Directory Sites and ServicesE. ServicesF. Authorization ManagerG. TPM ManagementH. Certification Authority

Correct Answer: ADSection: (none)Explanation


QUESTION 44Your network contains two Active Directory forests named contoso.com and adatum.com. Both forests containmultiple domains. All domain controllers run Windows Server 2012. Contoso.com has a one-way forest trust toadatum.com. A domain named paris.eu.contoso.com hosts several legacy applications that use NTLMauthentication. Users in a domain named london.europe.adatum.com report that it takes a long time to beauthenticated when they attempt to access the legacy applications hosted in paris.eu.contoso.com.

You need to reduce how long it takes for the london.europe.adatum.com users to be authenticated inparis.eu.contoso.com.

What should you do?

A. Create a shortcut trust.B. Create an external trust between the forest root domains.C. Disable SID filtering on the existing trust.D. Create an external trust.



QUESTION 45Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.You are creating a central access rule named TestFinance that will be used to audit members of theAuthenticated Users group for access failure to shared folders in the finance department.

You need to ensure that access requests are unaffected when the rule is published.

What should you do?

A. Add a User condition to the current permissions entry for the Authenticated Users principal.B. Set the Permissions to Use the following permissions as proposed permissions.C. Add a Resource condition to the current permissions entry for the Authenticated Users principal.D. Set the Permissions to Use following permissions as current permissions.


Explanation/Reference:http://technet.microsoft.com/en-us/library/jj134043.aspx

QUESTION 46You have a server named Server1 that runs a Server Core Installation of Windows Server 2012. Shadowscopies are enabled on all volumes.

You need to delete a specific shadow copy. The solution must minimize server downtime.


A. VssadminB. DiskpartC. WbadminD. Shadow



http://technet.microsoft.com/en-us/library/cc788026(v=ws.10).aspx

QUESTION 47Your network contains two Active Directory forests named contoso.com and litwareinc.com. A two- way foresttrusts exists between the forest. Selective authentication is enabled on the trust. The contoso.com forestcontains a server named Server1.

You need to ensure that users in litwareinc.com can access resources on Server1.

What should you do?

A. Install Active Directory Rights Management Services on a domain controller in contoso.com.B. Modify the permission on the Server1 computer account.C. Install Active Directory Rights Management Services on a domain controller in litwareinc.com.D. Configure SID filtering on the trust.



QUESTION 48Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. DC1 has the DHCP Server server role installed. DHCPis configured as shown in the exhibit. (Click the Exhibit button.)

You discover that client computers cannot obtain IPv4 addresses from DC1. You need to ensure that the client computers can obtain IPv4 addresses from DC1.

What should you do?

Exhibit:

A. Activate the scope.

B. Authorize DC1.C. Disable the Allow filters.D. Disable the Deny filters.


Explanation/Reference:There is no items in the deny List. So it means that client computers MAC addresses is not listed in the allowlist. So we have to disable the "Allow Filters"

QUESTION 49Your network contains an Active Directory domain named adatum.com. All domain controllers run WindowsServer 2008 R2. The domain contains a file server named Server6 that runs Windows Server 2012. Server6contains a folder named Folder1. Folder1 is shared as Share1. The NTFS permissions on Folder1 are shown inthe exhibit. (Click the Exhibit button.)

The domain contains two global groups named Group1 and Group2. You need to ensure that only users who are members of both Group1 and Group2 are denied access toFolder1.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

Exhibit:

A. Remove the Deny permission for Group1 from Folder1.B. Deny Group2 permission to Folder1.C. Install a domain controller that runs Windows Server 2012.D. Create a conditional expression.E. Deny Group2 permission to Share1.F. Deny Group1 permission to Share1.

Correct Answer: CDSection: (none)Explanation

Explanation/Reference:http://social.technet.microsoft.com/wiki/contents/articles/14269.introducing-dynamic-access-control-en-us.aspx

QUESTION 50You have a server named Server1 that runs Windows Server 2012. Server1 has a single volume that isencrypted by using BitLocker Drive Encryption (BitLocker). BitLocker is configured to save encryption keys to aTrusted Platform Module (TPM). Server1 is configured to perform a daily system image backup. Themotherboard on Server1 is upgraded. After the upgrade, Windows Server 2012 on Server1 fails to start. You

need to start the operating system on Server1 as soon as possible.What should you do?

A. Start Server1 from the installation media. Run startrec.exe.B. Move the disk to a server that has a model of the old motherboard. Start the server from the installation

media. Run bcdboot.exe.C. Move the disk to a server that has a model of the old motherboard. Start the server. Run tpm.msc.D. Start Server1 from the installation media. Perform a system image recovery.


Explanation/Reference:Encryption keys are lost. Nothing mentioned about password/keys recovery. My point is that the only way is torestore the server from a backup.

QUESTION 51You have 3 server named LON-DC1 that runs Windows Server 2012. An iSCSI virtual disk namedVirtualiSCSIl.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.VirtualiSCSIl.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit value of 0.

What should you do?

Exhibit:

A. Modify the properties of the VirtualiSCSI2.vhd iSCSI virtual disk.B. Run the Add-IscsiVirtualDiskTargetMapping cmdlet and specify the -Lun parameter.C. Run the iscsicli command and specify the reportluns parameter.D. Run the iscsicpl command and specify the virtualdisklun parameter.


Explanation/Reference:http://technet.microsoft.com/en-us/library/jj612800(v=wps.620).aspx

QUESTION 52Your network contains an Active Directory domain named contoso.com. A previous administrator implementeda Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof ofconcept was complete, the Active Directory Rights Management Services server role was removed.

You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating

that an existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMSSCP.


A. Authorization ManagerB. TPM ManagementC. Active Directory Sites and ServicesD. Services



QUESTION 53You have a server named Server1 that runs Windows Server 2012. Windows Server 2012 is installed onvolume C.

You need to ensure that Safe Mode with Networking loads the next time Server1 restarts.


A. The Msconfig commandB. The Restart-Server cmdletC. The Restart-Computer cmdletD. The Bootcfg command



QUESTION 54Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. DC1 has the DNS Server server role installed. Thenetwork contains client computers that run either Linux, Windows 7, or Windows 8. You have a standardprimary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

You plan to configure Name Protection on all of the DHCP servers. You need to configure the adatum.com zone to support Name Protection.

Which two configurations should you perform from DNS Manager? (Each correct answer presents part of thesolution. Choose two.)

Exhibit:

A. Sign the zone.B. Store the zone in Active Directory.C. Modify the Security settings of the zone.D. Configure Dynamic updates.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:http://technet.microsoft.com/en-us/library/ee941152(v=ws.10).aspx

QUESTION 55You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server2012. You need to force every node in Cluster1 to contact immediately the Windows Server Update Services(WSUS) server on your network for updates.


A. The Add-CauClusterRole cmdlet

B. The Wuauclt commandC. The Wusa commandD. The Invoke-CauScan cmdlet



QUESTION 56Your network contains an Active Directory domain named contoso.com. The network contains a file servernamed Server1 that runs Windows Server 2012. You are configuring a central access policy for temporaryemployees.

You enable the Department resource property and assign the property a suggested value of Temp. You need to configure a target resource condition for the central access rule that is scoped to resourcesassigned to Temp only.

Which condition should you use?

A. (Temp.Resource Equals "Department")B. (Resource.Temp Equals "Department")C. (Resource.Department Equals "Temp")D. (Department.Value Equals "Temp")


Explanation/Reference:http://technet.microsoft.com/fr-fr/library/hh846167.aspx

QUESTION 57Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the ActiveDirectory Certificate Services server role installed and is configured as a standalone certification authority (CA).

You install a second server named Server2. You install the Online Responder role service on Server2. You need to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signingcertificate to Server2.

What should you do?

A. On Server1, run the certutil.exe command and specify the -setreg parameter.B. On Server2, run the certutil.exe command and specify the -policy parameter.C. On Server1, configure Security for the OCSP Response Signing certificate template.D. On Server2, configure Issuance Requirements for the OCSP Response Signing certificate template.



QUESTION 58Your network contains an Active Directory domain named adatum.com. The domain contains a server namedCA1 that runs Windows Server 2012. CA1 has the Active Directory Certificate Services server role installed andis configured to support key archival and recovery.

You need to ensure that a user named User1 can decrypt private keys archived in the Active DirectoryCertificate Services (AD CS) database. The solution must prevent User1 from retrieving the private keys fromthe AD CS database.

What should you do?

A. Assign User1 the Issue and Manage Certificates permission to Server1.B. Assign User1 the Read permission and the Write permission to all certificate templates.C. Provide User1 with access to a Key Recovery Agent certificate and a private key.D. Assign User1 the Manage CA permission to Server1.


Explanation/Reference:http://social.technet.microsoft.com/wiki/contents/articles/7573.active-directory-certificate-services-pki-key-archival-and-management.aspx#Protecting_Key_Recovery_Agent_Keys

QUESTION 59Your network contains an Active Directory domain named contoso.com. The domain contains two sites namedSite1 and Site2 and two domain controllers named DC1 and DC2. Both domain controllers are located in Site1.You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2. A technicianconnects DC3 to Site2.

You discover that users in Site2 are authenticated by all three domain controllers. You need to ensure that the users in Site2 are authenticated by DC1 or DC2 only if DC3 is unavailable.

What should you do?

A. From Network Connections, modify the IP address of DC3.B. In Active Directory Sites and Services, modify the Query Policy of DC3.C. From Active Directory Sites and Services, move DC3.D. In Active Directory Users and Computers, configure the insDS-PrimaryComputer attribute for the users in

Site2.



QUESTION 60You have four servers that run Windows Server 2012. The servers have the Failover Clustering featureinstalled. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.


Site2 is a disaster recovery site. Server1, Server2, and Server3 are configured as the preferred owners of thecluster roles. Dynamic quorum management is disabled.

You plan to perform hardware maintenance on Server3. You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance onServer3, the cluster resource will remain available in Site1.

What should you do?

A. Enable dynamic quorum management.B. Remove the node vote for Server3.C. Add a file share witness in Site1.D. Remove the node vote for Server4 and Server5.


Explanation/Reference:http://msdn.microsoft.com/en-us/library/hh270280.aspx#VotingandNonVotingNodes

QUESTION 61You have a test server named Server1 that is configured to dual-boot between Windows Server 2008 R2 andWindows Server 2012. You start Server1 and you discover that the boot entry for Windows Server 2008 R2 nolonger appears on the boot menu. You start Windows Server 2012 on Server1 and you discover the diskconfigurations shown in the following table.

You need to restore the Windows Server 2008 R2 boot entry on Server1.

What should you do?

A. Run bcdedit.exe and specify the /createstore parameter.B. Run bootrec.exe and specify the /scanos parameter.C. Run bcdboot.exe d:\windows.D. Run bootrec.exe and specify the /rebuildbcd parameter.


Explanation/Reference:http://support.microsoft.com/kb/927392/en-us

QUESTION 62Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2 that run Windows Server 2012. You configure a new failover clusternamed Cluster1. Server1 and Server2 are nodes in Cluster1. You need to configure the disk that will be usedas a witness disk for Cluster1. How should you configure the witness disk?To answer, drag the appropriate configurations to the correct location or locations. Each configuration may beused once, more than once, or not at all. You may need to drag the split bar between panes or scroll to viewcontent.

Select and Place:

Correct Answer:


Explanation/Reference:http://technet.microsoft.com/en-us/library/jj612870.aspx#BKMK_witness

QUESTION 63Your network contains an Active Directory forest named contoso.com that contains a single domain. The forestcontains three sites named Site1, Site2, and Site3. Domain controllers run either Windows Server 2008 R2 orWindows Server 2012. Each site contains two domain controllers. Site1 and Site2 contain a global catalogserver. You need to create a new site link between Site1 and Site2. The solution must ensure that the site linksupports the replication of all the naming contexts. From which node should you create the site link?To answer, select the appropriate node in the answer area.

Hot Area:

Correct Answer:



QUESTION 64Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer2 that runs Windows Server 2012. You are a member of the local Administrators group on Server2. Youinstall an Active Directory Rights Management Services (AD RMS) root cluster on Server2. You need to ensurethat the AD RMS cluster is discoverable automatically by the AD RMS client computers and the users incontoso.com. Which additional configuration settings should you configure?To answer, select the appropriate tab in the answer area.

Hot Area:

Correct Answer:

QUESTION 65Your network contains an Active Directory domain named contoso.com. The domain contains two ActiveDirectory sites named Site1 and Site2.

You discover that when the account of a user in Site1 is locked out, the user can still log on to the servers inSite2 for up to 15 minutes by using Remote Desktop Services (RDS).

You need to reduce the amount of time it takes to synchronize account lockout information across the domain.

Which attribute should you modify?

To answer, select the appropriate attribute in the answer area.

Hot Area:

Correct Answer:

Exam

QUESTION 1You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on a subnetnamed Subnet1. Server1 has scope named Scope1. Scope1 contains IP addresses for the 192.168.1.0/24network.

Your company is migrating the IP addresses on Subnet1 to use a network ID of 10.10.0.0/16.

On Server11 you create a scope named Scope2. Scope2 contains IP addresses for the 10.10.0.0/16 network.

You need to ensure that clients on Subnet1 can receive IP addresses from either scope.

What should you create on Server1?

A. A multicast scopeB. A scopeC. A superscopeD. A split-scope


Explanation/Reference:http://technet.microsoft.com/en-us/library/dd759168.aspx

QUESTION 2Your network contains an Active Directory domain named adatum.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012.

On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)

You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to astandard primary zone.

What should you do before you change the zone type?

A. Unsign the zone.

B. Modify the Zone Signing Key (ZSK).C. Modify the Key Signing Key (KSK).D. Change the Key Master.



QUESTION 3You have a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server roleinstalled.

You need to configure Server1 to resolve queries for single-label DNS names.

Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)

A. Run the Set-DNSServerGlobalNameZone cmdlet.B. Modify the DNS suffix search list setting.C. Modify the Primary DNS Suffix Devolution setting.D. Create a zone named ".".E. Create a zone named GlobalNames.F. Run the Set-DNSServerRootHint cmdlet.

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc731744.aspxhttp://technet.microsoft.com/en-us/library/jj649907(v=wps.620).aspx

QUESTION 4You have a server named DC2 that runs Windows Server 2012. DC2 contains a DNS zone namedadatum.com.

The adatum.com zone is shown in the exhibit. (Click the Exhibit button.)

You need to configure DNS clients to perform DNSSEC validation for the adatum.com DNS domain.

What should you configure?

A. The Network Location settingsB. A Name Resolution PolicyC. The DNS Client settingsD. The Network Connection settings


Explanation/Reference:http://technet.microsoft.com/en-us/library/hh831411.aspx#config_client1

QUESTION 5Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server server roleinstalled. Server2 has the Hyper-V server role installed. Server2 has an IP address of 192.168.10.50.

Server1 has a scope named Scope1 for the 192.168.10.0/24 network.

You plan to deploy 20 virtual machines on Server2 that will be connected to the external network. The MACaddresses for the virtual machines will begin with 00-15-SD-83-03.

You need to configure Server1 to offer the virtual machines IP addresses from 192.168.10.200 to192.168.10.219. Physical computers on the network must be offered IP addresses outside this range. You wantto achieve this goal by using the minimum amount of administrative effort.

What should you do from the DHCP console?

A. Create reservations.B. Create a policy.C. Delete Scope1 and create two new scopes.D. Configure Allow filters and Deny filters.


Explanation/Reference:Explanation:http://blogs.technet.com/b/teamdhcp/archive/2012/08/22/granular-dhcp-server-administration-using-dhcp-policies-in-windows-server-2012.aspx

QUESTION 6Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domaincontrollers in both of the forests run Windows Server 2012. The adatum.com domain contains a file servernamed Servers.

Adatum.com has a one-way forest trust to contoso.com.

A contoso.com user name User10 attempts to access a shared folder on Servers and receives the errormessage shown in the exhibit. (Click the Exhibit button.)

You verify that the Authenticated Users group has Read permissions to the Data folder.

You need to ensure that User10 can read the contents of the Data folder on Server5 in the adatum.comdomain.

What should you do?

A. Grant the Other Organization group Read permissions to the Data folder.B. Modify the list of logon workstations of the contoso\User10 user account.C. Enable the Netlogon Service (NP-In) firewall rule on Servers.D. Modify the permissions on the Servers computer object in Active Directory.

Correct Answer: D



QUESTION 7Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003.

You have a domain outside the forest named adatum.com.

You need to configure an access solution to meet the following requirements:

- Users in adatum.com must be able to access resources in contoso.com.

- Users in adatum.com must be prevented from accessing resources in fabrikam.com.- Users in both contoso.com and fabrikam.com must be prevented from accessing resources in adatum.com.

What should you create?

A. A one-way external trust from contoso.com to adatum.comB. A one-way realm trust from adatum.com to contoso.comC. A one-way realm trust from contoso.com to adatum.comD. A one-way external trust from adatum.com to contoso.com


Explanation/Reference:Explanation: You need to make trust relationship where domain contoso.com trusts adatum.com.

http://technet.microsoft.com/en-us/library/cc728024(v=ws.10).aspx

QUESTION 8Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office.

All domain controllers run Windows Server 2012. The domain contains two domain controllers.

The domain controllers are configured as shown in the following table.

DC1 hosts an Active Directory-integrated zone for contoso.com.

You add the DNS Server server role to DC2.

You discover that the contoso.com DNS zone fails to replicate to DC2.

You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.

You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.


A. Active Directory Sites and ServicesB. NtdsutilC. DNS ManagerD. Active Directory Domains and Trusts



QUESTION 9Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003.

The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server2008 R2. The functional level of the domain is Windows Server 2008.

The fabrikam.com domain contains domain controllers that run either Windows Server 2003 or WindowsServer 2008. The functional level of the domain is Windows Server 2003.

The contoso.com domain contains a member server named Server1 that runs Windows Server 2012.

You install the Active Directory Domain Services server role on Server1.

You need to add Server1 as a new domain controller in the contoso.com domain.

What should you do?

A. Run the Active Directory Domain Services Configuration Wizard.B. Run adprep.exe /domainprep, and then run dcpromo.exe.C. Raise the functional level of the forest, and then run dcprorno.exe.D. Modify the Computer Name/Domain Changes properties.


Explanation/Reference:Windows Server 2012 requires a Windows Server 2003 forest functional level. That is, before you can add adomain controller that runs Windows Server 2012 to an existing Active Directory forest, the forest functionallevel must be Windows Server 2003 or higher.

http://blogs.technet.com/b/askpfeplat/archive/2012/09/03/introducing-the-first-windows-server-2012-domain-controller.aspx

QUESTION 10Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The forest functional level is Windows 2000.

The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server2008 R2. The domain functional level is Windows Server 2008.

The fabrikam.com domain contains domain controllers that run either Windows 2000 Server or WindowsServer 2003. The domain functional level is Windows 2000 native.

The contoso.com domain contains a member server named Server1 that runs Windows Server 2012.

You need to add Server1 as a new domain controller in the contoso.com domain.

What should you do first?

A. Raise the functional level of the contoso.com domain to Windows Server 2008 R2.B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2.C. Raise the functional level of the fabrikam.com domain to Windows Server 2003.D. Decommission the domain controllers that run Windows 2000.E. Raise the forest functional level to Windows Server 2003.


Explanation/Reference:Explanation:Windows Server 2012 requires a Windows Server 2003 forest functional level. That is, before youcan add a domain controller that runs Windows Server 2012 to an existing Active Directory forest, the forestfunctional level must be Windows Server 2003 or higher.

QUESTION 11Your network contains an Active Directory domain named adatum.com. The domain contains two domaincontrollers that run Windows Server 2012. The domain controllers are configured as shown in the followingtable.

You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you createa new user account named User1.

You need to prepopulate the password for User1 on DC2.



A. Connect to DC2 from Active Directory Users and Computers.B. Add DC2 to the Allowed RODC Password Replication Policy group.C. Add the User1 account to the Allowed RODC Password Replication Policy group.D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.



http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx#BKMK_pre

QUESTION 12Your company has offices in Montreal, New York, and Amsterdam.

The network contains an Active Directory forest named contoso.com. An Active Directory site exists for eachoffice. All of the sites connect to each other by using the DEFAULTIPSITELINK site link.

You need to ensure that only between 20:00 and 08:00, the domain controllers in the Montreal office replicatethe Active Directory changes to the domain controllers in the Amsterdam office. The solution must ensure thatthe domain controllers in the Montreal and the New York offices can replicate the Active Directory changes anytime of day.

What should you do?

A. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam fromDEFAULTIPSITELINK. Modify the schedule of DEFAULTIPSITELINK.

B. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.Modify the schedule of DEFAU LTIPSITELINK.

C. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam fromDEFAULTIPSITELINK. Modify the schedule of the new site link.

D. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.Modify the schedule of the new site link.



QUESTION 13Your network contains two Active Directory forests named contoso.com and adatum.com. A two- way foresttrust exists between the forests.

The contoso.com forest contains an enterprise certification authority (CA) named Server1.

You implement cross-forest certificate enrollment between the contoso.com forest and the adatum.com forest.

On Server1, you create a new certificate template named Template1.

You need to ensure that users in the adatum.com forest can request certificates that are based on Template1.


A. DumpADO.ps1B. RepadminC. Add-CATemplateD. CertutilE. PKISync.ps1

Correct Answer: ESection: (none)Explanation

Explanation/Reference:http://technet.microsoft.com/en-us/library/ff955845(v=ws.10).aspx#BKMK_Consolidating

QUESTION 14You have a server named Server1 that has the Active Directory Certificate Services server role installed.

Server1 uses a hardware security module (HSM) to protect the private key of Server1.

You need to ensure that the Active Directory Certificate Services (AD CS) database, log files, and private keyare backed up.

You perform regular backups of the HSM module by using a backup utility provided by the HSM manufacturer.

What else should you do?

A. Run the certutil.exe command and specify the -backupkey parameter.B. Run the certutil.exe command and specify the -backupdb parameter.C. Run the certutil.exe command and specify the -backup parameter.D. Run the certutil.exe command and specify the -dump parameter.


Explanation/Reference:http://technet.microsoft.com/en-us/library/cc732443(v=ws.10).aspx#BKMK_backupDB

QUESTION 15Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.

The domain contains a domain controller named DC1 that is configured as an enterprise root certificationauthority (CA).

All users in the domain are issued a smart card and are required to log on to their domain-joined clientcomputer by using their smart card.

A user named User1 resigned and started to work for a competing company.

You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not

prevent other users from logging on to the domain.


A. Active Directory Sites and ServicesB. Active Directory Administrative CenterC. Server ManagerD. Certificate Templates



QUESTION 16Your company has a main office and a branch office.

The main office contains a file server named Server1. Server1 has the BranchCache for Network Files roleservice installed. The branch office contains a server named Server2. Server2 is configured as a BranchCachehosted cache server.

You need to preload the data from the file shares on Server1 to the cache on Server2.

You generate hashes for the file shares on Server1.

Which cmdlet should you run next?

A. Add-BCDataCacheExtensionB. Set-BCCacheC. Publish-BCFileContentD. Export-BCCachePackage


Explanation/Reference:http://technet.microsoft.com/fr-fr/library/jj572970.aspx

QUESTION 17Your company has a main office and a branch office. The main office is located in Detroit. The branch office islocated in Seattle.

The network contains an Active Directory domain named adatum.com. Client computers run either

The main office contains 1,000 client computers and 50 servers. The branch office contains 20 clientcomputers.

All computer accounts for the branch office are located in an organizational unit (OU) namedSeattleComputers. A Group Policy object (GPO) named GPO1 is linked to the SeattleComputers OU.

You need to configure BranchCache for the branch office.

Hot Area:

Correct Answer:


Explanation/Reference:http://technet.microsoft.com/en-us/library/dd637820(v=ws.10).aspx

Distributed Cache modeIf client computers are configured to use Distributed Cache mode, the cached content is distributed amongclient computers on the branch office network. No infrastructure or services are required in the branch officebeyond client computers running Windows 7.

Hosted Cache modeIn hosted cache mode, cached content is maintained on a computer running Windows Server 2008 R2 on thebranch office network.

QUESTION 18You have a file server named Server1 that runs Windows Server 2012.

Data Deduplication is enabled on drive D of Server1.

You need to exclude D:\Folder1 from Data Deduplication.


A. Disk Management in Computer ManagementB. File and Storage Services in Server ManagerC. the classification rules in File Server Resource Manager (FSRM)D. the properties of D:\Folder1



QUESTION 19Your network contains an Active Directory domain named contoso.com. The network contains a file servernamed Server1 that runs Windows Server 2012.

You create a folder named Folder1. You share Folder1 as Share1. The NTFS permissions on Folder1 areshown in the Folder1 exhibit. (Click the Exhibit button.)

The Everyone group has the Full control Share permission to Folder1.

You configure a central access policy as shown in the Central Access Policy exhibit. (Click the Exhibit button.)

Members of the IT group report that they cannot modify the files in Folder1.

You need to ensure that the IT group members can modify the files in Folder1. The solution must use centralaccess policies to control the permissions.

Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)

A. On the Classification tab of Folder1, set the classification to Information Technology.B. On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT

group.

C. On Share 1, assign the Change Share permission to the IT group.D. On the Security tab of Folder1, remove the permission entry for the IT group.E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group.

Correct Answer: ADSection: (none)Explanation


Central access policies for files enable organizations to centrally deploy and manage authorization policies thatinclude conditional expressions that use user groups, user claims, device claims, and resource properties.(Claims are assertions about the attributes of the object with which they are associated). For example, toaccess high-business-impact (HBI) data, a user must be a full-time employee, obtain access from a manageddevice, and log on with a smart card. These policies are defined and hosted in Active Directory DomainServices (AD DS).

http://technet.microsoft.com/en-us/library/hh846167.aspx

QUESTION 20Your network contains an Active Directory domain named contoso.com.

You are creating a custom Windows Recovery Environment (Windows RE) image.

You need to ensure that when a server starts from the custom Windows RE image, a drive is mappedautomatically to a network share.

What should you modify in the image?

A. startnet.cmdB. Xsl-mApp1ngs.xmlC. Win.iniD. smb.types.ps1xml


Explanation/Reference:Explanation: The best way to define what to start is using starnet.cmdhttp://technet.microsoft.com/en-us/library/cc766521(v=ws.10).aspx

QUESTION 21You have a server named Server1 that runs Windows Server 2012. Server1 has the Windows DeploymentServices server role installed.

You back up Server1 each day by using Windows Server Backup.

The disk array on Server1 fails.

You replace the disk array.

You need to restore Server1 as quickly as possible.

What should you do?

A. Start Server1 from the Windows Server 2012 installation media.B. Start Server1and press F8.C. Start Server1 and press Shift+F8.D. Start Server1 by using the PXE.


Explanation/Reference:Explanation: http://www.windowsnetworking.com/articles_tutorials/Restoring-Windows-Server-Bare-Metal.html

QUESTION 22You have a DNS server named Server1 that runs Windows Server 2012. Server1 has a signed zone forcontoso.com.

You need to configure DNS clients to perform DNSSEC validation for the contoso.com DNS domain.


A. The Network Connection settingsB. A Name Resolution PolicyC. The Network Location settingsD. The DNS Client settings



QUESTION 23Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012.

On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)

You need to change the replication scope of the contoso.com zone.

What should you do before you change the replication scope?

A. Modify the Zone Transfers settings.B. Add DC1 to the Name Servers list.C. Add your user account to the Security settings of the zone.D. Unsign the zone.


Explanation/Reference:Explanation:http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29018

QUESTION 24Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM)Server feature installed.

On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM.

On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use IPAM on Server1 to manage DNS on DC1.

What should you do?

A. Modify the outbound firewall rules on Server1.B. Modify the inbound firewall rules on Server1.C. Add Server1 to the Remote Management Users group.D. Add Server1 to the Event Log Readers group.


Explanation/Reference:Explanation:http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/c882c077-61bd-45f6-ab47-735bd728d3bc/

QUESTION 25Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named Dc1. DC1 has the DNS Server server role installed.

The network has two sites named Site1 and Site2. Site1 uses 10.10.0.0/16 IP addresses and Site2 uses10.11.0.0/16 IP addresses. All computers use DC1 as their DNS server.

The domain contains four servers named Server1, Server2, Server3, and Server4. All of the servers run aservice named Service1.

DNS host records are configured as shown in the exhibit. (Click the Exhibit button.)

You discover that computers from the 10.10.1.0/24 network always resolve Service1 to the IP address ofServer1.

You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2 when thecomputers attempt to resolve Service1.

What should run on DC1?

A. dnscmd /config /bindsecondaries 1B. dnscmd /config /localnetpriority 0C. dnscmd /config /localnetprioritynetmask 0x0000ffffD. dnscmd /config /roundrobin 0



QUESTION 26You have a DHCP server named Server1. Server1 has an IP address 192.168.1.2 is located on a subnet thathas a network ID of 192.168.1.0/24.

On Server1, you create the scopes shown in the following table.

You need to ensure that Server1 can assign IP addresses from both scopes to the DHCP clients on the localsubnet.

What should you create on Server1?

A. A scopeB. A superscopeC. A split-scopeD. A multicast scope



QUESTION 27Your network contains servers that run Windows Server 2012. The network contains a large number of iSCSIstorage locations and iSCSI clients.

You need to deploy a central repository that can discover and list SCSI resources on the network automatically.

Which feature should you deploy?

A. the Windows Standards-Based Storage Management featureB. the iSCSI Target Server role serviceC. the iSCSI Target Storage Provider featureD. the iSNS Server service feature



microsoft 70-412 exam questions & answers · 2019-11-29 · exam - from 70-412 file question 1...

Documents