~mil spec weld qualifcation guide
TRANSCRIPT
CONSUMABLEMILITARY ANDAGENCYQUALIFICATIONSGUIDE
Effective January 15, 2002
CONSUMABLE QUALIFICATIONS GUIDE
For your convenience, these position notations are listed here. Each is tied to a code used in the body of the tables which comprisethe remainder of this book. The notes and codes listed below are also repeated throughout the book where applicable.
ABS Position Notations for United States Listings: Lloyds Position Notations:(Normally used for ABS witnessing of an AWS classification) D Approved only for Downhand and
1 All positions Exclusive of Vertical Down Horizontal Fillet (unless otherwise indicated)2 Horizontal Fillet and Flat X Approved only for Horizontal-Vertical3 Flat V Approved only for Vertical (in upward
direction unless otherwise indicated)ABS Position Notations: O Approved only for Overhead(Normally used for ABS certification)
F Flat (downhand) and Horizontal FilletV Vertical (Up)V-Down Vertical DownOH OverheadH Horizontal (Horizontal/Vertical)HF Horizontal Fillet onlyALL All Positions Exclusive of Vertical DownO Approved Only for Overhead
— American Association of State Highway and Transportation Officials (AASHTO) specification ANSI/AASHTO/AWS D1.5-95 Bridge Welding Code includes “AASHTO/AWS Fracture Control Plan (FCP) for Nonredundant Members”. Under this specification,Heat and Lot testing is not required if the welding consumable is produced under a continuing quality assurance program which has been audited and approved by ABS, Lloyd’s Register of Shipping, or ASME. Also, Diffusible Hydrogen Testing is not required as long as the Certificate of Conformance lists diffusible hydrogen testing results which meet the level required by the specification.
— American Bureau of Shipping (ABS) approvals are issued subject to the Bureau’s Rule requirement for Materials and Welding Part 2. Tests are conducted in the company’s plant, under supervision of an ABS surveyor to determine if electrodes conform to ABS grades or AWS specifications previously judged satisfactory by ABS for welding vessels. The Bureau publishes a list of approved electrodes giving their class and approved operating positions for each size. Sometimes, where there is no approved specification, approval may be given on the basis that each individual shipyard or contractor will qualify the procedure and elec-trode subject to Part 2, Section 3, paragraph 2/3C.3.2.c.
— American Society of Mechanical Engineers (ASME) has issued specifications covering construction of nuclear facilities. Each lot of welding consumables to be used must be individually tested to ASME SFA specifications.
— American Welding Society (AWS) specifications and classifications are established by the Society to provide standards for different types of electrodes throughout the industry. AWS does not test or approve any electrodes. The manufacturer certifies that their electrode conforms to a certain class. (See PCX.xx section for AWS classes for each electrode.)
— Canadian Welding Bureau (CWB) approvals are based on tests witnessed by a CWB representative. Approvals listed in this booklet are for products manufactured in the USA. Products manufactured in Canada are approved separately. In general, CWB specifications are similar to AWS specifications. Copies of approvals are maintained in Cleveland and are available upon request.
— Department of Transportation (Bureau of Public Roads) requires that the contractor shall furnish a certified copy of a dated annual report of results of all pertinent required tests of AWS A5.1, A5.5, or other AWS specifications, as appropriate, made on electrode of the same class, size and brand and which was manufactured by the same process and with the same materials as the electrode being furnished for use on the project. Welding on main members shall be capable of producing weld metal having impact strength of at least 20 ft-lbs., Charpy V-notch at a temperature of 0°F or below. These Certificates of Conformance to Requirements are available on request.
— Lloyd’s Register (LR), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Bureau Veritas (BV), Controlas, and Nippon Kaiji Kyokai (NKK) issue approvals for electrodes used worldwide in shipbuilding, offshore structures and pressure vessels. Products approved under the rules of these classification societies require annual requalification under the supervision of their surveyors.
— TÜV (TUV) is a German agency very similar to ASME. Projects manufactured under TUV rules must be welded with consumable approved by TUV. Initial approvals are obtained based on testing completed under TUV supervision. Approvals are maintained subject to Quality Assurance audits completed every two years.
— U.S. Coast Guard has formally adopted the American Bureau of Shipping list of approved electrodes.
— Deutche Bahn (DB) is the approval agency for German railroads. Approvals are based on tests specified by DB, and witnessed by an authorized third party.
2
3
TABLE OF CONTENTS
Description Page No.
Position Notation Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Military Qualified Stick Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Military Qualified MIG and Submerged Arc Electrodes and Fluxes . . . . . . . . . . . .5
Agency Qualified Stick Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Agency Qualified Flux-Cored Self-Shielded Electrodes . . . . . . . . . . . . . . . . . . . . .8
Agency Qualified MIG Electrode and Gas Combinations . . . . . . . . . . . . . . . . . .10
Agency Qualified Flux-Cored Gas-Shielded Electrode/Gas Combinations . . . . .12
Agency Qualified Submerged Arc Flux/Electrode Combinations . . . . . . . . . . . . .14
A.W.S. Classifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
International Approvals of U.S. Manufactured Products . . . . . . . . . . . . . . . . . . .18
Special Customer Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Lincoln Electric Quality Assurance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Customer Assistance Policy
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment,consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed theirexpectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of ourproducts. We respond to our customers based on the best information in our possession at that time. LincolnElectric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to suchinformation of advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for anycustomer’s particular purpose, with respect to such information or advice. As a matter of practical consideration,we also cannot assume any responsibility for updating or correcting any such information or advice once it hasbeen given, nor does the provision of information or advice create, expand or alter any warranty with respect tothe sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by LincolnElectric is solely within the control of, and remains the sole responsibility of the customer. Many variablesbeyond the control of Lincoln Electric affect the results obtained in applying this type of fabrication methods andservice requirements.
Conforms ToLincoln Federal Approved Test Reference No.
Electrode Specification Type Class Electrode Diameter and Comments
Fleetweld® 5P QQ-E-450a(1) MIL-6010(1) 1 3/32, 1/8, 5/32,3/16 CL-9L-6Fleetweld 35 QQ-E-450a(1) MIL-6011(1) 1 3/32, 1/8, 5/32, 3/16 4926 K-3 and K-10
2 1/4Fleetweld 35 QQ-E-450a(1) MIL-G-6011(1) 1 1/8, 5/32, 3/16 CL-9L-8
2 1/4 4926-K-3 & K-10Fleetweld 7 QQ-E-450a(1) MIL-6012(1) 1 1/8, 5/32, 3/16 NAES-38022-48 and NAES-3801 2-49Fleetweld 37 QQ-E-450a(1) MIL-6013(1) 1 3/32, 1/8, 5/32, 3/16 4926 K 1 and K 2Jetweld® 2 QQ-E-450a(1) MIL-6027(1) 2 5/32, 3/16, 7/32, MAT. LAB 5606-1
1/4 LECO report of 25 Jan. ‘61Shield-Arc® 85 MIL-E-22200/7 MIL-7010-A1 1 1/8, 5/32 EES-6675-AN and G-4Jetweld 3 QQ-E-450a(1) MIL-7024(1) 2 1/8, 5/32, 3/16, 7/32, 1/4 CL-9L-3Jetweld LH-70 MIL-E-22200/1 MIL-7018 1 3/32, 1/8, 5/32 ITL-4294 and CL-9
2 3/16, 7/32, 1/4Lincoln 7018 MR MIL-E-22200/1 MIL-7018 1 3/32, 1/8, 5/32 CL-6AR-1 ,-3
2 3/16Jetweld LH®-75 MR MIL-E-22200/10A MIL-7018-M 1 3/32, 1/8, 5/32 CL-9L-17
2 3/16, 7/32, 1/4Jet-LH 8018-C3 MR MIL-E-22200/1 MIL-8018-C3 1 3/32, 1/8, 5/32 CL-9L-4, -12, -13
2 3/16, 7/32, 1/4Jetweld LH-100M1 MR MIL-E-0022200/10C MIL-10018-M1 1 3/32, 1/8, 5/32 MINSY RPT.—CL-9L-19
2 3/16 138-27-80Jetweld LH-110M MR MIL-E-22200/1 MIL-11018-M 1 3/32, 1/8, 5/32 CL-9L-1, -7, -10, -11, -14, -20
2 3/16, 7/32Lincoln 11018 MR MIL-E-22200/1 MIL-11018-M 1 3/32, 1/8, 5/32 CL-6AR-3, -24
2 3/16, 7/32Lincoln 10018 M1 MR MIL-E-22200/10C MIL-10018-M1 1 3/32, 1/8, 5/32 CL-6AR-36
2 3/16Lincoln 10718 MR PPD 802-6337513 MIL-10718-M 1 3/32, 1/8, 5/32 —
2 3/16Red Baron® 308L MR MIL-E-22200/2D MIL-308L-16 1 3/32, 1/8, 5/32 LE-91-51
2 3/16Red Baron 308/308H MR MIL-E-22200/2D MIL-308-16 1 3/32, 1/8, 5/32 LE-91-51
2 3/16Red Baron 309/309L MR MIL-E-22200/2D MIL-309-16, 1 3/32, 1/8, 5/32 LE-91-51
MIL-309L-16 2 3/16Red Baron 316/316L MR MIL-E-22200/2D MIL-316-16, 1 3/32, 1/8, 5/32 LE-91-51
MIL-316L-16 2 3/16Red Baron 347 MR MIL-E-22200/2D MIL-347-16 1 1/8, 5/32, LE-91-51
2 3/16Stainweld ® 347-15 MIL-E-22200/2C MIL-347-15 1 3/32, 1/8, 5/32 ITL-959-NJ
2 3/16 EES-920012 (52)Stainweld 347-16 MIL-E-22200/2C MIL-347-16 1 3/32, 1/8, 5/32 ITL-959-NJ and
2 3/16 NAMC Itr. XM-72-WJF:CO-L18/8(6985) of 5/23/57
Wearweld® MIL-E-19141 1-A2c 3 3/16, 1/4 NYK MATL. LAB. 5899-4 (Part 2)
4
CONSUMABLE QUALIFICATIONS GUIDEMILITARY QUALIFIED PRODUCTS
STICK ELECTRODES
Class: 1 = All positions. 2 = Horizontal Fillet and Flat 3 = Flat only
(1) Specification QQ-E-450a was cancelled by the General Services Administration effective December 24, 1985. Per their instructions, future procurements should be made in accordance with AWS A5.1+.
NOTE: Electrodes are tested by an authorized testing laboratory under supervision of military personnel. When tests shown conformity with militaryspecification, approval is given and the electrode is placed on the government Qualified Products List (Q.P.L.) Periodic retesting is required under mostelectrode specifications. Certain specifications do not call for qualification and have no Q.P.L. Products supplied under military specifications mustundergo lot or batch tests with each order. Such items are noted under “Comments”. Revision suffixes are not included herein because they do notappear on the Q.P.L. and have no bearing on qualification of the product.
BR-41 REQUIRES THAT ALL ORDERS OR BIDS FOR GOVERNMENTAGENCIES MUST BE PROCESSED THROUGH THE FACTORY.
5
NOTE: Lot inspection is required with each order. The products marked with an (*) are listed on a Qualified Products List (QPL).
(1) MIL-E-18193B and MIL-F-18251C specs have been cancelled by the U.S. Navy. Future acquisitions should be to MIL-E-23765/4.
CONSUMABLE QUALIFICATIONS GUIDEMILITARY QUALIFIED PRODUCTS
MIG, FLUX-CORED AND SUBMERGED ARCELECTRODES AND FLUXES
Electrode Test Referenceor MIL Product Approved Number and
Flux Specification Classification Electrode Diameters Comments
L-60 Electrode MIL-E-18193B(1) Type MIL-A1L-61 Electrode MIL-E-18193B(1) Type MIL-B1L-70 Electrode MIL-E-18193B(1) Type MIL-A2L-60 Electrode* MIL-E-23765/4 Type MIL-EL12 5/64,3/32,1/8,5/32,3/16,7/32 LE-90-40L-61 Electrode* MIL-E-23765/4 Type MIL-EM12K 1/16,5/64,3/32,1/8,5/32,3/16 LE-90-39, 94-4L-70 Electrode* MIL-E-23765/4 Type MIL-EA1 5/64,3/32,1/8,5/32,3/16 LE-90-44L-50 Electrode* MIL-E-23765/1D & 1E Type MIL-70S-3 All Sizes CL-9L-5L-56 Electrode* MIL-E-23765/1D & 1E Type MIL-70S-6 All Sizes CL-9L-16L-56B Electrode* MIL-E-23765/1E Type MIL-70S-6 All Sizes LE-94-1LA-90 Electrode* MIL-E-23765/2D & 2E Type MIL-80S-3 All Sizes LE-94-2LA-100 Electrode* MIL-E-23765/2C, Type MIL-100S-1 All Sizes CL-9L-15
2D -Amd 1, & 2E760 Flux MIL-F-18251C(1) Type MIL-F1780 Flux MIL-F-18251C(1) Type MIL-F2860 Flux MIL-F-18251C(1) Type MIL-F3880 Flux MIL-F-18251C(1) Type MIL-F4880M Flux MIL-F-18251C(1) Type MIL-F4882 Flux MIL-F-18251C(1) Type MIL-F4761 Flux (with L-61)* MIL-E-23765/4 Type MIL-F7A2-EM12K LE-90-39780 Flux (with L-60)* MIL-E-23765/4 Type MIL-F7A0-EL12 LE-90-40780 Flux (with L-61)* MIL-E-23765/4 Type MIL-F7A2-EM12K LE-90-41860 Flux (with L-60)* MIL-E-23765/4 Type MIL-F6A2-EL12 LE-90-42860 Flux (with L-61)* MIL-E-23765/4 Type MIL-F7A2-EM12K LE-90-43860 Flux (with L-70)* MIL-E-23765/4 Type MIL-F7A2-EA1-A2 LE-90-43960 Flux (with L-61)* MIL-E-23765/4 Type MIL-F7A2-EM12K LE-94-3880M Flux* MlL-E-23765/2D-Amd 1 Type MIL-100S-1F Flux CL-9L-15980 Flux* MIL-E-23765/1E Type MIL-70S-3F LE-90-45MIL800 Flux* MIL-E-23765/1E Type MIL-70S-6F LE-90-46MIL800 Flux* MlL-E-23765/2D-Amd 1 Type MIL-100S-1F CL-9L-15MIL800-H Flux* MIL-E-23765/2E Type MIL-100S-1F & 2FMIL800-H/LA-100* MlL-E-23765/2D-Amd 1, & 2E Flux - Type MIL-100S-2F LE-91-47, 91-52-A
Wire - Type MIL-100S-2 3/32, 1/8, 5/32 CL-9L-15MIL800-H/MC-100* MlL-E-23765/2D-Amd 1 Flux - Type MIL-100S-2CF LE-91-48, 91-52-B
Wire - Type MIL-100S-2C 3/32, 1/8Innershield® NR-232* MIL-E-24403/1D Type MIL-71T-8AS .068, .072* CL-9L-18
Outershield® 70* MIL-E-24403/1D Type MIL-70T-1C 1/16, 5/64, 3/32, 1/8 CL-9L-24Outershield 71* MIL-E-24403/1D Type MIL-71 T-1C & MIL-71T-1M .045, .052, 1/16 CL-9L-24Outershield 71-HYM* MIL-E-24403/1D Type MIL-71T-1-HYM .045, .052, 1/16 LE-89-33Outershield 71-HYC* MIL-E-24403/1D Type MIL-71T-1-HYC .045, .052, 1/16 LE-89-33Outershield 71M* MIL-E-24403/1D Type MIL-71T-1M .045, .052, 1/16, .072 LE-91-50
Type MIL-71T-1COutershield 75-H* MIL-E-24403/1D Type MIL-70T-5-HYM .045, 1/16 LE-89-32Outershield 81 Ni1-H* MIL-E-24403/1D Type MIL-81T1-Ni1-HYM .045, 1/16 LE-89-34Outershield 91K2-H* MIL-E-24403/2C Type MIL-101TM .045, 1/16 LE-89-35Outershield MC-100* MlL-E-23765/2D-Amd 1, & 2E Type MIL-100S-2C .035, .045, 1/16, 3/32, 1/8 LE-89-37, 91-48,
91-52-B
6
ABS Position Notations for United States Listings: (1) ABS Position Notations: Normally used for ABS certification.Normally used for ABS witnessing of an AWS classification. F Flat (downhand) and Horizontal Fillet1 All positions exclusive of Vertical Down V Vertical Up2 Horizontal Fillet and Flat V-down Vertical Down3 Flat OH Overhead
H Horizontal (Horizontal/Vertical)HF Horizontal Fillet onlyALL All positions exclusive of Vertical Down
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
STICK ELECTRODES
A.B.S. & Coast Guard Approval Lloyds Register
AWSClassification Approved Electrode Approved
Electrode or ABS Grade Positions Diameter Grade Position
Fleetweld 5P E6010 1 3/32, 1/8, 5/32, 3/16 3 AllFleetweld 5P+ E6010 1 3/32, 1/8, 5/32, 3/16 3 AllFleetweld 35 E6011 1 3/16 and smaller 3 All
2 7/32, 1/4Fleetweld 35LS E6011 1 5/32 — —Fleetweld 7 E6012 1 3/16 and smaller — —
2 7/32, 1/4Fleetweld 37 E6013 1 3/16 and smaller 3 AllFleetweld 47 E7014 1 1/8, 5/32 1 All
2 3/16, 7/32, 1/4Jetweld 1 E7024-1 2 1/4 and smaller 1 DJetweld 3 E7024 2, 3 1/4 and smaller — —Jetweld 2 E6027 2 1/4 and smaller 3 DJetweld LH-70 E7018, 3-3YH10 1 5/32 and smaller 3,3YH5 All
2 3/16, 7/32, 1/43 5/16
Jetweld LH-73 E7018 1, 2 3/32, 1/8, 5/32 — —Jetweld LH-75 MR E7018-1 1 3/32, 1/8, 5/32, — —
2 3/16, 7/32, 1/4Jet-LH 78 MR E7018 1 3/32, 1/8, 5/32, 3,3YH5 D,X,V,O
2 3/16, 7/32, 1/4Excalibur™ 7018 E7018M, 3-3YH5 1 3/32, 1/8, 5/32, 3,3YH5 D,X,V,O
2 3/16Excalibur 7018-1 E7018M. 3-3YH5 1 3/32, 1/8, 5/32, 3,3YH5 D,X,V,O
2 3/16Lincoln 7018 M MR 3YH5 1 3/32, 1/8, 5/32, — —
2 3/16Jetweld LH-3800 E7028, 2-2YH10 2 5/32, 3/16, 7/32, 2, 2YH10 D
F(1) 1/4Jet-LH 8018-C1 MR E8018-C1 1 1/8, 5/32, — —
2 3/16, 1/4Jet-LH 8018-C3 MR E8018-C3 1 1/8, 5/32, — —
2 3/16, 7/32, 1/4Shield Arc 70+ E8010-G 1 1/8, 5/32, 3/16 — —Shield Arc 85 E7010-A1 1 3/32, 1/8, 5/32, 3/16 — —Jetweld LH-110M MR E11018-M 1 1/8, 5/32, — —
2 3/16, 7/32, 1/4Lincoln 11018 MR E11018-M 1 3/32, 1/8, 5/32, — —
2 3/16, 7/32Red Baron 308L MR E308L-16 1 3/32, 1/8, 5/32, 3/16 — —Red Baron 308/308H MR E308H-16 1 3/32, 1/8, 5/32, 3/16 — —Red Baron 308/308L-V MR E308-15, E308L-15 1,V-down 3/32, 1/8 — —Red Baron 309/309L MR E309-16, E309L-16 1 3/32, 1/8, 5/32 — —
3/16Red Baron 309/309L-V MR E309-15, E309L-15 1,V-down 3/32, 1/8 — —Red Baron 316/316L MR E316-16, E316L-16 1 3/32, 1/8, 5/32, 3/16 — —Red Baron 316/316L-V MR E316-15, E316L-15 1,V-down 3/32, 1/8 — —Red Baron 347 MR E347-16 1 3/32, 1/8, 5/32, 3/16 — —Stainweld 308/308L E308-16, E308L-16 1 5/32 and smaller — —
2 3/16Stainweld 309-16 E309-16 1 5/32 and smaller — —
2 3/16, 1/4Stainweld 310-16 E310-16 1 5/32 and smaller — —
2 3/16, 1/4Stainweld 316/316L E316-16, E316L-16 1 5/32 and smaller — —
7
Lloyd’s Position NotationsD Approved only for Downhand welding and Horizontal Fillet
welding (Unless otherwise indicated)X Approved only for Horizontal-Vertical weldingV Approved only for Vertical welding (in upward direction
except where otherwise indicated)O Approved only for Overhead welding
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
STICK ELECTRODES
Det Norske Veritas Germanischer Lloyd Bureau Veritas Nippon Kaiji Kyokai
Approved Approved Approved NK ApprovedGrade Position Grade Position Grade Position Sizes Grade Position
— — — — — — — — —— — — — — — — — —— — — — — — — — —
— — — — — — — — —— — — — — — — — —
1 Flat, Horiz 1 Flat, Horiz 1 Flat, Horiz — — —1 Flat, Horiz 1 Flat, Horiz 1 Flat, Horiz — — —
1 Flat 1 Flat 1 Flat — — —1 Flat 1 Flat 1 Flat — — —3 Flat 3 Flat 3 Flat — — —
3Y40H5 All 3YH5 All 3YHHH All — — —
— — — — — — — — —— — — — — — — — —
3YH5 All 3YH5 All 3YHHH All — — —
3YH5 All 3YH5 All 3YHHH All — — —
3YH5 All — — 3YHHH All
— — — — — — — — —
2YH10 Flat 2YH10 Flat 2YHH Flat — — —
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —— — — — — — — — —— — — — — — — — —
— — — — — — — — —
— — — — — — — — —— — — — — — — — —— — — — — — — — —— — — — — — — — —
— — — — — — — — —— — — — — — — — —— — — — — — — — —— — — — — — — — —— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
8
A. B. S. & Coast Guard Approval Lloyd's Register
Approved ToInnershield AWS Approved ABS Approved ApprovedElectrode Sizes Classification Position Grade Position Grade Position
NR®-131 3/32 E70T-10 2 — — — —
NR-202 .068, 5/64 E71T-7 1 — — — —
NR-203M 5/64, 3/32 E71T-8J 1 3SA-3YSA F,V,OH 3S-3YS D,X,V,O
NR-203 MP 1mm,.068, 5/64, 3/32 — — 3SA-3YSAH15 All(1) 3S-3YSH15 All(1)
NR-203 Nickel (1%) 5/64, 3/32 — — 3SA-3YSA All 3S-3YSH15 All(1)
NR-203 Nickel C 5/64 — — 3SA F,V,OH 3SH15 D,X,V,O(1)
NR-203 Ni C Plus H 5/64 — — 4SA-4YSAH10 All — —
NR-207 5/64 E71T8-K6 1(1) — — — —
NR-211-MP .068, 5/64 E71T-11 1(1) — — — —
NR-212 .045, .068, 5/64 E71TG-G 1(1)
NR-232 .068, .072, 5/64 — — 3SA-3YSAH15 All 3S-3YSH15 All
NR-305 5/64 — — 2SA-2YSA F — —
NR-305 3/32 — — 2SA-2YSA F — —
NR-311 5/64, 3/32, 7/64 E70T-7 2 — — — —
NR-311 Ni 5/64, 3/32, 7/64 — — 2SA-2YSA F 2S-2YS D
NR-450-H 5/64 — — 3SA-3YSAH10 All 3S-3YSH10 D,X,U,O
NS-3M 5/64, 3/32, .120 E70T-4 2 — — — —
(1) Includes Vertical Down(2) Test Temp -40°F
ABS Position Notations for United States Listings:Normally used for ABS witnessing of an AWS classification.1 All positions exclusive of Vertical Down2 Horizontal Fillet and Flat3 Flat
(1) ABS Position Notations: Normally used for ABS certification.F Flat (downhand) and Horizontal FilletV Vertical UpV-down Vertical DownOH OverheadH Horizontal (Horizontal/Vertical)HF Horizontal Fillet onlyALL All positions exclusive of Vertical Down
Lloyd’s Position NotationsD Approved only for Downhand welding and Horizontal Fillet
welding (Unless otherwise indicated)X Approved only for Horizontal-Vertical weldingV Approved only for Vertical welding (in upward direction
except where otherwise indicated)O Approved only for Overhead welding
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
FLUX-CORED SELF-SHIELDED ELECTRODES
9
Det Norske Veritas Germanischer Lloyd Bureau Veritas Nippon Kaiji Kyokai
Approved Approved Approved ApprovedGrade Position Grade Position Grade Position Sizes Grade Position
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
IIIYMS H15 All(1) 3YSH15 All(1) SA3YMH All(1) .068, 5/64 KSW 53 NH10 All
IIIYMSH15 All(1) 3YSH15 — — — — — —
IIIMS H15(2) All(1) — — — — — — —
— — — — — — — — —
IIIYMS H15 All(1) 3YSH15 All SA3YMH All — — —
— — — — — — — — —
IIIYMS H15 All 3YSH10 All SA3YMH All .068, .072, 5/64 KSW 53 NH10 F, H, VU, OH
— — — — — — — — —
IIYMS Flat 2YS F,H SA2YM F, H — — —
— — — — — — — — —
IIYMS Flat 2YS F,H SA2YM F, H 5/64, 3/32, 7/64 KSW 52 NH10 F, H
IIIYMSH10 All 3YSH10 All — — — — —
— — — — — — — — —
(1) Includes Vertical Down(2) Test Temp -40°F
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
FLUX-CORED SELF-SHIELDED ELECTRODES
A. B. S. & Coast Guard Approval Lloyd's Register
Electrode/Gas AWS Approved ABS Approved ApprovedCombination Sizes Classification Position Grade Position Grade Position
L50/CO2 .030,.035,.045,.052,1/16 — — 3SA-3YSA All 3S-3YS All
L50/75% Argon .030, .035, — — 3SA-3YSA All 3S-3YS All
-25% CO2 .045, .052, 1/16
L56/CO2 .035, .045, .052, 1/16 — — 3SA-3YSA All 3S-3YS All
L56/75% Argon .035, .045, .052, 1/16 — — 3SA-3YSA All 3S-3YS All
-25% CO2
Blue Max® MIG .030 - 1/16 ER308Si/ — — — — —308LSi ER308LSi
Blue Max MIG .030 - 1/16 ER309Si/ — — — — —309LSi ER309LSi
Blue Max MIG .030 - 1/16 ER316Si/ — — — — —316LSi ER316LSi
SuperGlaze .040 - 1/16 IACS Grade WC All WC All
5183/Argon
SuperGlaze .040 - 1/16 IACS Grade WB All WB All
5356/Argon
ABS Position Notations for United States Listings:Normally used for ABS witnessing of an AWS classification.1 All positions exclusive of Vertical Down2 Horizontal Fillet and Flat3 Flat
(1) ABS Position Notations: Normally used for ABS certification.F Flat (downhand) and Horizontal FilletV Vertical UpV-down Vertical DownOH OverheadH Horizontal (Horizontal/Vertical)HF Horizontal Fillet onlyALL All positions exclusive of Vertical Down
Lloyd’s Position NotationsD Approved only for Downhand welding and Horizontal Fillet
welding (Unless otherwise indicated)X Approved only for Horizontal-Vertical weldingV Approved only for Vertical welding (in upward direction
except where otherwise indicated)O Approved only for Overhead welding
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
MIG ELECTRODE AND GAS COMBINATIONS
10
Det Norske Veritas Germanischer Lloyd Bureau Veritas Nippon Kaiji Kyokai
Approved Approved Approved ApprovedGrade Position Grade Position Grade Position Sizes Grade Position
IIIYMS All — — — — — — —
IIIYMS All — — — — — — —
IIIYMS All — — — — — — —
IIIYMS All — — — — — — —
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
5183 All S-AlMg 4.5Mn All WC All — — —
5356 All S-AlMg 5Mn All WB All — — —
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
MIG ELECTRODE AND GAS COMBINATIONS
11
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
FLUX-CORED GAS-SHIELDED ELECTRODE/GAS COMBINATIONS
12
A. B. S. & Coast Guard Approval Lloyd's Register
Electrode/Gas AWS Approved ABS Approved ApprovedCombination Sizes Classification Position Grade Position Grade Position
Outershield 70-CO2 1/16, 5/64, 3/32 — — 2SA-2YSAH15 Flat 2S-2YSH15 Flat
Outershield 71-CO2 .045, .052, 1/16 — — 2SA-2YSAH15 All 2S-2YSH15 All
Outershield 71 Elite CO2 .045, .052, 1/16 — — 3SA-3YSAH10 All 3S-3YSH10 All
Outershield 71 Elite .045, .052, 1/16 — — 3SA-3YSAH10 All 3S-3YSH10 All
-75%Ar/25%CO2Outershield 71-M .045, .052, 1/16 — — 3SA-3YSAH10 All 3S-3YSH10 All
-CO2Outershield 71-M .045, .052, 1/16 — — 3SA-3YSAH10 All 3S-3YSH10 All
-75% Ar/25% CO2Outershield 71 HYM .045, 1/16 — — 3SA-3YSAH5 All — —
-75% Ar/25% CO2Outershield 712 C .045, .052, 1/16 — — 3SA-3YSAH10 All 3S-3YSH10 All
-CO2Outershield 712 M .045, .052, 1/16 — — 3SA-3YSAH10 All 3S-3YSH10 All
-75% Ar/25% CO2Outershield MC-710 .045, .052, 1/16 — — 3SA-3YSA Flat 3S-3YSH15 Flat
-75% Ar/25% CO2Outershield MC-710 .045, .052, 1/16 — — 3SA-3YSA Flat 3S-3YSH15 Flat
-90% Ar/10% CO2Outershield MC-710XL .045, .052, 1/16 — — 3SA-3YSAH10
-90% Ar/10% CO2Outershield 81K2-H .045, 1/16 — — 4Y40SAH5 All 4SY40H5 All
-75% Ar/25% CO2Outershield 81Ni1-H .045, 1/16 — — 3SA-3YSAH10 All 4SY40H10 All
-75% Ar/25% CO2Outershield XLH-70 -CO2 3/32 — — 3SA-3YSAH5 Flat — —
Blue Max FC-308L-CO2 .045-1/16 E308LT0-1 Flat
Blue Max FC-308L- .045-1/16 E308LT0-4 Flat
75-80% Ar/Balance CO2Blue Max FC-309L-CO2 .045-1/16 E309LT0-1 Flat
Blue Max FC-309L- .045-1/16 E309LT0-4 Flat
75-80% Ar/Balance CO2Blue Max FC-316L-CO2 .045-1/16 E316LT0-1 Flat
Blue Max FC-316L- .045-1/16 E316LT0-4 Flat
75-80% Ar/Balance CO2Blue Max FCP-308L-CO2 .045-1/16 E308LT1-4 All
Blue Max FCP-308L- .045-1/16 E308LT1-4 All
75-80% Ar/Balance CO2Blue Max FCP-309L-CO2 .045-1/16 E309LT1-1 All
Blue Max FCP-309L- .045-1/16 E309LT1-4 All
75-80% Ar/Balance CO2Blue Max FCP-316L-CO2 .045-1/16 E316LT1-1 All
Blue Max FCP-316L- .045-1/16 E316LT1-4 All
75-80% Ar/Balance CO2
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
FLUX-CORED GAS-SHIELDED ELECTRODE/GAS COMBINATIONS
13
Det Norske Veritas Germanischer Lloyd Bureau Veritas Nippon Kaiji Kyokai
Approved Approved Approved ApprovedGrade Position Grade Position Grade Position Grade Position
IIYMS(H15) Flat — — — — — —
IIYMS(H15) Flat — — — — — —
IIIYMS(H10) All 3YHHS All 3YSAMHH All — —
IIIYMS(H10) All 3YHHS All 3YSAMHH All — —
IIIYMS(H10) All 3YHHS All 3YSAMHH All KSW 53G (C)H10 All
IIIYMS(H10) All 3YHS All 3YSAMHH All — —
— — — — — — — —
IIIYMS(H10) All
IIIYMS(H10) All 3YHS All 3YSAMHH All — —
IIIYMS Flat — — — — — —
IIIYMS Flat — — — — — —
IV Y46MS(H5) All — — — — — —
IVYMS(H10) All 5YHHS All SA3,3YM(HH) All — —
UP CVN at -40°
— — — — — — — —
A. B. S. & Coast Guard Approval Lloyd's Register
Flux/Electrode AWS Approved ABS Approved ApprovedCombination Sizes Classification Position Grade Position Grade Position
760/L60 — F6A2-EL12 2 — — — —
761/L60 — F7A2-EL12 2 — — — —
761/L61 — F7A2-EM12K 2 — — 3M-3YM D
761/L70 — — — 3M, 3YM F — —
(triple tandem) — 3YT F
780/L60 — F7A0-EL12 2 — — 2M-2YM D
780/L61 — F7A2-EM12K 2 — — 2M-2YM D
780/L70 — — — — — 2YM D
781/L50 — F7A0-EM13K 2 — — — —
781/L61 — F7A0-EM12K 2 — — — —
8500/L61 — — — 4M-4YM F 4YMH10 D
8500/LS3 — — — 4M-4YM F 4YMH10 D
8500/LA81 — — — — — — —
8500/LA85 — — — — — 4YMH10 D
8500/LA90 F9A2-EA3K-A3 2 — — — —
860/L60 — F6A2-EL12 2 — — — —
860/L61 — F7A2-EM12K 2 — — 3M-3YM D
880M/L50 — — — 3M-3YM F 3M-3YM D
880M/L56 — — — 3M-3YM F 3M-3YM D
882/L61 — F7A6-EM12K 2 — — — —
880/LAC M2 — F11A6-ECM2-M2 2 — — — —
880/LAC Ni2 — F7P10-ECNi2-Ni2 2 — — — —
960/L50 — F7A2-EM13K 2 — — — —
960/L61 — F7A2-EM12K 2 — — — —
Blue Max S308/308L 5/64-5/32 ER308/ER308L — — — — —
Blue Max S309/309L 5/64-5/32 ER309/ER309L — — — — —
Blue Max S316/316L 5/64-5/32 ER316/ER316L — — — — —
ABS Position Notations for United States Listings:Normally used for ABS witnessing of an AWS classification.1 All positions exclusive of Vertical Down2 Horizontal Fillet and Flat3 Flat
(1) ABS Position Notations: Normally used for ABS certification.F Flat (downhand) and Horizontal FilletV Vertical UpV-down Vertical DownOH OverheadH Horizontal (Horizontal/Vertical)HF Horizontal Fillet onlyALL All positions exclusive of Vertical Down
Lloyd’s Position NotationsD Approved only for Downhand welding and Horizontal Fillet
welding (Unless otherwise indicated)X Approved only for Horizontal-Vertical weldingV Approved only for Vertical welding (in upward direction
except where otherwise indicated)O Approved only for Overhead welding
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
SUBMERGED ARC FLUX/ELECTRODE COMBINATIONS
14
Det Norske Veritas Germanischer Lloyd Bureau Veritas Nippon Kaiji Kyokai
Approved Approved Approved ApprovedGrade Position Grade Position Grade Position Grade Position
— — — — — — — —
— — — — — — — —
IIIYM D 3YM D A3YM D — —
IIIYTM — — — — — — —
— — — — — — — —
IIYMT D 2YTM D A2YTM D — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
IVYM D 4YM D — — — —
IVYM D 4YM D — — — —
IVYT D 4YT D — — — —
IVYM D 4YM D — — — —
— — — — — — — —
— — — — — — — —
IIIYM, IIYT D 3YM/2YT D A3YM, A2YT D — —
VYM for D — — — — — —
NV2-4 & NV4-4
IIIYM D — — — — — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
— — — — — — — —
CONSUMABLE QUALIFICATIONS GUIDEAGENCY APPROVALS
SUBMERGED ARC FLUX/ELECTRODE COMBINATIONS
15
16
Lincoln Canadian WeldingProduct Bureau Class
Jetweld LH-70 E4918-1Jet-LH 78MR E4918-1Excalibur 7018-1 E4918-1Jetweld 1 E4924-1Jetweld LH-3800 E4928Jet LH-8018-C1-MR E5518-C1Jet LH-8018-C3-MR E5518-C3ShieldArc 85 E4910-A1ShieldArc HYP E4910-GShieldArc HYP+ E4910-P1Shield-Arc 70+ E5510-GShield-Arc 80 E5510-GLincoln LH-D80 E5518-GLincoln LH-D90 E6218-GLincoln LH-D100 E6918-GLincoln 11018MR E7618-MRed Baron 308/308H MR E308-16Red Baron 308/308H MR E308H-16Red Baron 308L MR E308L-16Red Baron 309/309L MR E309-16Red Baron 309/309L MR E309L-16Red Baron 310 MR E310-16Red Baron 316/316L MR E316-16Red Baron 316/316L MR E316L-16Red Baron 347 MR E347-16Blue Max 308 AC/DC E308-26Blue Max 308L AC/DC E308L-26Blue Max 309 AC/DC E309-26Blue Max 309L AC/DC E309L-26Blue Max 316 AC/DC E316-26Blue Max 316L AC/DC E316L-26
Blue Max S308/308L ER308L Blue Max S309/309L ER309L Blue Max S316/316L ER316L
Flux/Wire CombinationsLincolnweld 760/L-60 (2) F43A3-EL12Lincolnweld 760/L-61 (2) F49A3-EM12KLincolnweld 761/L-60 (2) F49A3-EL12Lincolnweld 761/L-61 (2) F49A3-EM12KLincolnweld 761/L-70 (1) F9A0-EA1-GLincolnweld 780/L-16 (2) F49A2-EL12Lincolnweld 780/L-60 (2) F49A2-EL12Lincolnweld 780/L-61 (1) (2) F49A3-EM12KLincolnweld 781/L-50 (1) (2) F49A2-EM13KLincolnweld 781/L-61 (1) (2) F49A2-EM12KLincolnweld 860/L-61 (2) F49A3-EM12KLincolnweld 880M/L-50 (2) F49A5/EM13KLincolnweld 882/L-61 (2) F49A6-EM12KLincolnweld 960/L-61 (1) (2) F49A3-EM12KLincolnweld 960/LA-75 (1) F8A2-ENi1K-NLincolnweld 980/L-50 (1) F49A2-EM13KLincolnweld 980/L-61 (1) F49A3-EM12KLincolnweld 980/LA-75 (1) F8A2-ENi1K-NLincolnweld 980/LC-72 (1) F49A3-EC1Lincolnweld AXXX10/L-61 (2) F7A4-EM12K-Ni1
CONSUMABLE QUALIFICATIONS GUIDEINTERNATIONAL APPROVALS FOR
U.S. PRODUCTS
(1) US manufactured wire.(2) Canadian manufactured wire.
Lincoln Canadian WeldingProduct Bureau Class
Blue Max MIG 308L Si ER308L SiBlue Max MIG 309L Si ER309L SiBlue Max MIG 316L Si ER316L Si
Blue Max FC308L/CO2 E308LT0-1 Blue Max FC309L/CO2 E309LT0-1 Blue Max FC316L/CO2 E316LT0-1
Super Arc L-50/CO2 ER49S-3SuperGlide S-3/CO2 ER49S-3SuperArc L-54/CO2 ER49S-4SuperArc L-56/CO2 ER49S-6SuperGlide S-6/CO2 ER49S-6ValueArc S-6/CO2 ER49S-6SuperArc LA-75/Ar + 1-5% O2 ER80S-Ni1SuperArc LA-75/92 Ar-8% CO2 ER80S-Ni1SuperArc LA-90/CO2 ER80S-D2SuperArc LA-90/Ar + 1-5% O2 ER90S-D2SuperArc LA-100/Ar + 2% O2 ER100S-G
SuperGlaze 4043 ER4043SuperGlaze 5356 ER5356
Outershield 70/CO2 E492T-9-H16Outershield 70C/CO2 E492T-9-H16Outershield HD-70/CO2 E492T-9-H16Outershield 71/CO2 E491T-9-H16Outershield 71/Ar + 20-25% CO2 E491T-9M-H16Outershield 71M/CO2 E491T-9-H16Outershield 71M/Ar + 20-25% CO2 E491T-9M-H16Outershield 712C/CO2 E491T-9-H16Outershield 71 Elite/CO2 E491T-9-H16Outershield 71 Elite/Ar + 20-25% CO2 E491T-9M-H16Outershield MC-710/Ar + 20-25% CO2 E491C-6M-H16Outershield MC-710XL/Ar + 8% CO2 E491C-6M-H16Outershield MC-710XL/Ar + 20-25% CO2 E491C-6M-H16Outershield 81K2-H/Ar + 20-25% CO2 E80T1-K2M-H16Outershield 81Ni1-H/Ar + 20-25% CO2 E81T1-Ni1M-H8Outershield MC-1100/Ar + 10% CO2 E110C-G-H4
Innershield NS-3M E492T-4-H16Innershield NR-203Ni1% E71T8-Ni1-H16Innershield NR-203MP E491T-8-H16Innershield NR-207 E71T8-K6-H16Innershield NR-211MP E491T-11-H16Innershield NR-212 E71TG-G-CHInnershield NR-232 E491T-8-H16Innershield NR-305 E492T-6-H16Innershield NR-311 E492T-7-H16
Fleetweld 5P E4310Fleetweld 5P+ E4310Fleetweld 35LS E4311Fleetweld 180 E4311Fleetweld 35+ E4311Fleetweld 37 E4313Fleetweld 37+ E4313Fleetweld 47 E4914Lincoln 7018AC E4918Jetweld LH-73 E4918Excalibur 7018 E4918
17
CONSUMABLE QUALIFICATIONS GUIDEINTERNATIONAL APPROVALS FORU.S. MANUFACTURED PRODUCTS
Lincoln Product Approved by Controlas
Innershield NR-203 Nickel (1%)Innershield NR-203 Nickel CInnershield NR-207Innershield NR-208-HInnershield NR-232Innershield NR-400
Lincoln Product Approved by Deutsche Bahn
Innershield NS-3MInnershield NR-211MPInnershield NR-305Innershield NR-203 Nickel (1%)Innershield NR-232Innershield NR-311 NiInnershield NR-400
Lincolnweld 761Lincolnweld 780Lincolnweld 860Lincolnweld 980
Supra MIGSuperArc L-56SuperArc LA100
L-60L-61L-70
Lincoln Product Approved by JIS
Product Standard Classification
Outershield 71M/CO2 Z3313 YFL-C503ROutershield MC702/CO2 Z3313 YFW-C502M
Innershield NS-3M Z3313 YFW-S50GBInnershield NR-131 Z3313 YFW-S50GBInnershield NR-152 Z3313 YFW-S50GBInnershield NR-203MP Z3313 YFW-S50GBInnershield NR-203 Nickel C Z3313 YFW-S430BInnershield NR-203 Nickel (1%) Z3313 YFL-S503BInnershield NR-203 Nickel (1%)-H Z3313 YFL-S503BInnershield NR-203 Ni C Plus Z3313 YFL-S503BInnershield NR-203 Ni C Plus-H Z3313 YFL-S503BInnershield NR-207 Z3313 YFL-S503BInnershield NR-207-H Z3313 YFL-S503BInnershield NR-208-H Z3313 YFW-S50GBInnershield NR-211MP Z3313 YFW-S50GBInnershield NR-212 Z3313 YFW-S50GBInnershield NR-232 Z3313 YFL-S503BInnershield NR-305 Z3313 YFL-S503GInnershield NR-311 Z3313 YFW-S50GBInnershield NR-311 Ni Z3313 YFL-S503BInnershield NR-400 Z3313 YFL-S503BInnershield NR-400-H Z3313 YFL-S503BInnershield NR-450 Z3313 YFW-S50GBInnershield NR-450-H Z3313 YFW-S50GB
Lincoln Product Approved by TUV
Fleetweld 5PFleetweld 5P+Shield-Arc 70+Shield-Arc HYPShield-Arc 85
Innershield NR-203 Nickel (1%)Innershield NR-203 Nickel (1%)-HInnershield NR-207Innershield NR-207-HInnershield NR-208-HInnershield NR-232Innershield NR-400Innershield NR-400-H
Outershield 70Outershield MC710
SuperArc L56SuperArc LA100
Lincolnweld L60Lincolnweld L61Lincolnweld L70Lincolnweld 761Lincolnweld 780Lincolnweld 781Lincolnweld 860Lincolnweld 880Lincolnweld 880M
SuperGlaze 4043SuperGlaze 5087SuperGlaze 5183SuperGlaze 5356SuperGlaze 5754
If material is to used on jobs governed by JIS, please contact theSpecial Order Department for pricing and delivery information.
If material is to used on jobs governed by Deutsche Bahn, andthe "U" sign marking is required on the label, please contactthe Special Order Department for pricing and delivery information.
18
QUALITY ASSURANCE PROGRAMS
CUSTOMER QUALITY REVIEW
1-Day Program (Second Day Optional)The Customer Quality Review Program is designed to offer our customers an opportunity to observe our excellent Quality AssuranceSystem and see what makes our products superior. Examine for yourself how our unique Incentive Management concepts influenceour commitment to quality Lincoln products.
You will tour both our Cleveland Consumable Division facilities and see, first hand, our attention to detail that is inherent in eachdepartment. Later in the day, you have the choice of a Machine Division or a Robotic/Automatic Division tour.
Our Guaranteed Cost Reduction (GCR) Program, which assists you in lowering welding fabrication costs and increases yourproductivity, will also be discussed.
MILITARY / NUCLEAR AUDITS2-Day ProgramThe Military and Nuclear Audit Program is an intensive, technical program designed to familiarize auditors with the specific details ofLincoln’s Quality Assurance System, including conformance to specifications.
A visit through our operations will provide an in-depth look at all of Lincoln’s consumable manufacturing from a quality audit viewpoint.Also included in the visit will be Lincoln’s Metrology Laboratory, Heat Treatment facilities and both Destructive and Non-Destructivetesting areas.
The documentation related to our Quality Assurance System Elements and Special Order Records will be demonstrated. Sufficienttime will be allocated to allow specific order documentation review and traceability.
Inquiries may be directed to: The Lincoln Electric Company22801 St. Clair AvenueCleveland, OH 44117-1199
FAX: (216) 383-5473TEL: (216) 383-2550
CUSTOM PRODUCT FORMULATIONS
Deposit Chemistry: Lincoln can develop a completely new electrode formula for your requirements. We have done this for practicallyevery welding application you can think of; ranging from consumables for sheet metal applications to heavy fabrication projects. Thesecustomized products not only include carbon and low alloy steel products, but also stainless and hardfacing applications.
Operating Characteristics: Even if you do not require special deposit chemistries, you may want to change a consumable from anoperational standpoint. For example, we can tailor specific characteristics to improve bead appearance, reduce spatter and increaseproductivity.
TESTED MATERIALSPre-Tested Bonded Stock: If you need immediate access to pre-tested consumables, you can turn to Lincoln’s bonded stock ware-house which houses consumables that have been individually tested to meet many of the standard industry specifications.
Each purchase is accompanied by a certified material test report confirming specific testing criteria you require. It is a very effectivesolution, saving both time and money.
SPECIAL PACKAGINGBar Codes: Your company’s bar code labels can be placed on consumable packages as small as one pound or as large as 1,000pound reels or shipping pallets.
Custom Packaging/Palletizing: Your special packaging requirements can be accommodated by Lincoln. We have created a widevariety of specially-sized packages such as a 3,200 pound flux bag designed for centralized flux distribution or two pound spools forMIG welding.
Generic Wrapping: If you know you want the quality of Lincoln consumables, we can provide you with bulk quantities.
CONSUMABLE QUALIFICATIONS GUIDESPECIAL CUSTOMER SERVICES
19
NOTES
LINCOLN NORTH AMERICADISTRICT SALES OFFICES
U.S.A.ALABAMA
BIRMINGHAM 35124-1156 (205) 988-8232MOBILE 36582(251) 443-6524
ALASKAContact SEATTLE District Office(206) 575-2456
ARIZONAPHOENIX 85260-1768(480) 348-2004
ARKANSASLITTLE ROCK 72032-4371(501) 764-0480
CALIFORNIAFRESNO 93722-3949(559) 276-0110LOS ANGELES 90670-2936(562) 906-7700SACRAMENTO 95677-4729(916) 630-1885SAN DIEGO 92108-3911(619) 208-9001SAN FRANCISCO 94550-9657(925) 443-9353
COLORADODENVER 80112-5115(303) 742-8887
CONNECTICUTNORTH HAVEN 06238-1090(860) 742-8887
WASHINGTON DCHERNDON, VA 20170-5227(703) 904-7735
FLORIDAJACKSONVILLE 32259-4396(904) 287-9595MIAMI 33178-1175(305) 888-3203ORLANDO 32714-1974(407) 788-8557TAMPA 33594-6387(770) 475-0955
GEORGIAATLANTA 30076-4914(770) 475-0955SAVANNAH 31324-5180(912) 727-4286
LATIN AMERICAMiami, Florida U.S.A. Phone: (305) 888-3203
EUROPEThe Netherlands Phone: 31 24 3522 911
RUSSIA, AFRICA & MIDDLE EASTCleveland, Ohio U.S.A.Phone: (216) 481-8100
ASIA PACIFICSingaporePhone: 65 276 0878
HAWAIISee SEATTLEDistrict Office(206) 575-2456
IDAHOBOISE 83616-6646(208) 938-2302
ILLINOISCHICAGO 60521-5629(630) 920-1500PEORIA 61607-2046(630) 920-1500
INDIANAEVANSVILLE 47630(812) 842-2775FT. WAYNE 46825-5547(219) 484-4422SOUTH BEND 46561-9160(219) 674-5523INDIANAPOLIS 46038-9459(317) 845-8445
IOWACEDAR RAPIDS 52402-3160(319) 362-6804DAVENPORT 52806-1344(563) 386-6522DES MOINES 50265-6218(515) 224-4121
KANSASKANSAS CITY 66214-1625(913) 894-0888WICHITA 67037-9614(316) 788-7367
KENTUCKYLOUISVILLE 47112-7025(502) 727-7335
LOUISIANABATON ROUGE 70808-3150(225) 922-5151LAFAYETTE 70507-3126(337) 886-1090SHREVEPORT 71108-2521(318) 869-3531
MARYLANDBALTIMORE 21050-3067(443) 831-0416
MASSACHUSETTSBOSTON 02452-8405(781) 899-2010
MICHIGANDETROIT 48034-4005(248) 353-9680FLUSHING 48433-1855(810) 487-1310GRAND RAPIDS 49512-3924(616) 942-8780
MINNESOTAMINNEAPOLIS 55447-5435(612) 551-1990
MISSISSIPPIJACKSON 39212-9635(601) 372-7679
MISSOURIKANSAS CITY (KS) 66214-1625(913) 894-0888ST. LOUIS 63146-3572(314) 993-5465SPRINGFIELD 65804(417) 823-0574
MONTANAContact SEATTLEDistrict Office(206) 575-2456
NEBRASKALINCOLN 68521-4806(402) 474-5697OMAHA 68046-2826(402) 339-1809
NEW JERSEYEDISON 08837-3939(732) 225-2000
NEW MEXICOALBUQUERQUE 87008(505) 286-4801
NEW YORKALBANY (315) 432-0281BUFFALO (315) 432-0281NEW YORK CITY(888) 269-6755SYRACUSE 13057-1040(315) 432-0281
NORTH CAROLINACHARLOTTE 28273-6200(704) 588-3251RALEIGH 27604-8456(919) 231-5855
OHIOAKRON 44236-4680(330) 342-8009CINCINNATI 45242-3706(513) 554-4440CLEVELAND 44143-1433(216) 289-4160COLUMBUS 43221-4073(614) 488-7913DAYTON 45458(937) 885-6964TOLEDO 43528-9483(419) 867-7284
OKLAHOMAOKLAHOMA CITY 73119-2416(405) 686-1170TULSA 74146-1622(918) 622-9353
OREGONPORTLAND 97220-6800(503) 528-0553
PENNSYLVANIAERIE 16506-2979(814) 835-3531JOHNSTOWN 15905-2506(814) 535-5895PHILADELPHIA 19008-4310(610) 543-9462PITTSBURGH 15275-1002(412) 787-7733YORK 17404-1144(717) 764-6565
SOUTH CAROLINAGREENVILLE 29681-4724(864) 967-4157COLUMBIA 29209(803) 783-2851
SOUTH DAKOTASIOUX FALLS 57108-2609(605) 339-6522
TENNESSEEKNOXVILLE 37923-4506(865) 693-5513MEMPHIS 38115-5946(901) 363-1075NASHVILLE 37027(615) 236-1144TRI-CITIES 37601-3411(423) 928-6047
TEXASDALLAS 76051-7602(817) 329-9353HOUSTON 77060-3143(281) 847-9444SAN ANTONIO 78133-3502(830) 964-2421
UTAHMIDVALE 84047-3759(801) 233-9353
VIRGINIAHERNDON 20170-5227Washington, D.C.(703) 904-7735ROANOKE(703) 904-7735WILLIAMSBURG 23602-7048(757) 870-5508
WASHINGTONSEATTLE 98188-7615(206) 575-2456SPOKANE 99005-9637(509) 468-2770
WEST VIRGINIACHARLESTON 25526-9796(304) 757-9862
WISCONSINGREEN BAY 54302-1829(920) 435-1012MILWAUKEE 53186-0403(262) 650-9364
CANADAALBERTA
CALGARY T2H 2M3(403) 253-9600EDMONTON T6H 2K1(403) 436-7385WINNIPEG R3N 0C7(204) 488-6398
BRITISH COLUMBIAVANCOUVER V3B 7A2(604) 844-5209
MARITIMESNOVA SCOTIA B2X 3N2(902) 434-2725
MANITOBAWINNIPEG R3N 0C7(204) 488-6398
ONTARIOTORONTO M4G 2B9(416) 421-2600
QUEBECMONTREAL J5Y 2G3(514) 654-3121
LINCOLN INTERNATIONAL HEADQUARTERS
HARRIS CALORIFIC DIVISION2345 Murphy Blvd., Gainesville, Georgia 30504 U.S.A.
Phone: 1-800-241-0804 • Fax: (770) 535-0544 • Web Site: www.harriscal.com
ConsumablesC1.55 11/01