milegate for dedicated networks - squarespace · pdf filemilegate for dedicated networks...
TRANSCRIPT
MileGate for Dedicated Networks
Multi-Service Packet Transport Platform
© KEYMILE
Content MileGate for Dedicated Networks
About Dedicated Networks
MileGate Introduction
MileGate Special Features
MileGate Network Applications
MileGate Ethernet Applications
MileGate TDM Applications
Value Add and Conclusion
Page 2 of 68 © KEYMILE
MileGate Functional Units
© KEYMILE Page 3 of 68
About
Dedicated Networks
Dedicated Networks are used at …
A I R P O R T S
P I P E L I N E S
M O T O R W A Y S
T E L E C O N T R O L T R A F F I C C O N T R O L
R A I L W A Y S
W A T E R W A Y S
E L E C T R I C U T I L I T I E S
A U T H O R I T I E S
D E F E N C E
Page 4 of 68 © KEYMILE
C I V I L S E C U R I T Y
© KEYMILE Page 5 of 68
Dedicated Networks – Special Conditions for Telecommunication Equipment
It is not about:
Data Center environment
Constant temperature of +25°C
with 40% humidity
No dust
Continuous airflow
It is about:
Outdoor environment
Outside temperature of -50°C to
+ 50°C with up to 100% humidity
Dirty air
No airflow
Nevertheless we are transporting 10GbE and STM-16 with 99.999% reliability
Dedicated Networks – Main Requirements (1/2)
Critical services must be transported with
High availability
Fast convergence
Deterministic behaviour
Dedicated networks have been built and expanded for many
years – the results are
Complex network structures
Multitude of different equipment and management systems
Lots of existing services are still based on TDM technologies
Ethernet and SDH are the standard transport technologies
Maintainability and manageability is a key requirement
Page 6 of 68 © KEYMILE
Dedicated Networks – Main Requirements (2/2)
Equipment must be hardened for harsh environments
Electrical sub-stations
Railway track-side installations
Outdoor deployment in outdoor housings
Facing migration to Ethernet
New services are Ethernet based
Old services changing towards Ethernet e.g.
Voice (e.g. TDM PBX to IP PBX)
SCADA (e.g. interfaces of sensors/actors changing from V.24/V28
towards Ethernet)
Migration of transport network from SDH to packet networks
Maintaining legacy equipment and services until swap to a
packet network is a must for the telecommunication system
Page 7 of 68 © KEYMILE
Dedicated Networks – 3 Network Concepts for the new Requirements
Only SDH Network
Packet data transported with
Ethernet over SDH (EoS)
TDM and SDH functionality
SDH Network and packet
Network in parallel
Packet and TDM services
Only packet Network
Makes sense for networks
where the major traffic is packet
based
TDM over Circuit Emulation
Page 8 of 68 © KEYMILE
SDH
Network
SDH
Network
Packet
Network Packet
Network
MileGate from KEYMILE supports all Concepts
Page 9 of 68 © KEYMILE
SDH
Network
SDH
Network
Packet
Network Packet
Network
MileGate for mission critical applications is a multi-service packet transport platform,
designed for high availability dedicated networks
© KEYMILE Page 10 of 68
MileGate
Introduction
MileGate 2510
19" / 8 HU / 21 slots
Up to 20 slots for units
MileGate 2310
19" / 4 HU / 8 slots
Up to 7 slots for units
Page 11 of 68 © KEYMILE
MileGate – Platform Architecture for Dedicated Networks
Mid-size Node Full-size Node
Management
Network
Elements
ECST UNEM
Configuration
Local Craft Terminal
Monitoring
Alarming
Same Units, same Management, same Capabilities
MileGate – Network Element Architecture
Page 12 of 68 © KEYMILE
Multi-service packet transport platform with modular,
Ethernet/IP based system architecture
Backplane with two 1GbE stars, two 10GbE stars, and TDM
bus connection to any slot
Any service at any slot concept
Full redundancy of core units and Ethernet stars
Up to 4 x 10GbE optical network interfaces with link
aggregation (with core unit redundancy)
Extended operating temperature range for operation in harsh
environmental in outdoor housings
Different subrack sizes to accommodate different deployment
requirements
MileGate – General Platform Features
Page 13 of 68 © KEYMILE
Provides smooth migration from TDM to Ethernet services as
well as from PDH/SDH to Ethernet transport networks
High availability of 99,999% (highest MTBF values, system
architecture with an all-embracing redundancy concept)
Supports fanless operation – no forced ventilation necessary
Support of critical TDM services with TDM to packet
interworking functionality
Fully managed with a flexible network management system
with offline configuration capabilities and interfaces towards
an umbrella management system
MileGate is ideal for networks that
are built-up with packet technology
expand on existing TDM technology
use both technologies simultaneously
MileGate – Ethernet Platform Features
Page 14 of 68 © KEYMILE
Multiple Ethernet protection/load balancing mechanisms for
the transport network like RSTP, LACP, ERPS
IEEE switching approach with centralised switching function
64 Gbps wire speed Ethernet core (upgradeable by changing
core unit)
Extension of the number of Ethernet interfaces by inserting
units in the subrack
Behaves as one single integrated switch (called “chassis
switch”) with centralised
VLAN management
Spanning Tree implementation, supporting RSTP and MSTP
Other units with stand-alone switches can be included
MPLS ready
© KEYMILE Page 15 of 68
MileGate – Overview Application Interfaces
Ethernet
100BaseFX, 1000BaseFX
10/100/1000BaseT
Power over Ethernet
SHDSL EFM
Voice
Telephony
E&M 2 or 4 wire
FXO, FXS
TDM PDH
G.703 2 Mbps
G.703 64 kbps co-directional
SHDSL TDM
Serial data
V.24/V.28
X.21/V.11
V.35
SDH
SDH STM-4
SDH STM-1
© KEYMILE Page 16 of 68
MileGate – Overview Transport Interfaces
SDH
SDH STM-16
SDH STM-4
SDH STM-1
Ethernet
1GbE
10GbE
PDH
n x 2 Mbps (E1)
DSL
n x SHDSL EFM
n x SHDSL TDM
© KEYMILE Page 17 of 68
MileGate – Overview Network Functions
Ethernet
VoIP media gateway
Layer2 and Layer3 switching
(LACP, VRRP, ERPS, RSTP/MSTP, OSPF)
TDM-over-Ethernet (circuit emulation)
Ethernet over PDH (MLPPP)
Synchronization
PTP - 1588v2
Synchronous Ethernet
TDM
128 x 2 Mbps cross-connect
Data conferencing
TDM-over-Ethernet (circuit emulation)
SDH
Add/Drop multiplexer
Ethernet-over-SDH
Telephony
SIP
analogue trunks (FXO)
Voice conferencing
Content MileGate Feature Set
System Architecture
Management
Page 18 of 68 © KEYMILE
xyz
Chassis Switch Architecture
Fanless Operation
System Architecture – The Backplane
Optical/electrical
Ethernet
ports 1GbE / 10GbE Double Star Ethernet
Network
Legacy
data- & telephony
TDM interfaces
PDH Network
SDH Network
TDM bus
Combination of Ethernet and TDM services
Page 19 of 68 © KEYMILE
System Architecture – The Gateways
TDM over
Ethernet
(SAToP)
SIP Media
Gateway
Optical/electrical
Ethernet
ports 1GbE / 10GbE Double Star
Legacy
data- & telephony
TDM interfaces TDM bus
Ethernet
over TDM
(EoTDM)
Smooth Migration with unique Gateway Concept
Ethernet Network
SDH Network
PDH Network
Ethernet
over SDH
(EoS)
Page 20 of 68 © KEYMILE
System Architecture – Core Unit, Gateways and Transport Units
Optical/electrical
Ethernet
ports 1GbE / 10GbE Double Star
Legacy
data- & telephony
TDM interfaces TDM bus
SA
To
P
SIP
Eo
TD
M
Eo
S
Ethernet Network
SDH Network
PDH Network
COGE5 (Core Unit)
• 2x 1 or 10 GbE Uplink
• 4x 10/100/1000BaseT
• 64Gbs switching capacity
NUSA1 (EoS/SDH Unit)
• 2x STM-16/-4 Uplink
• 2x STM-4/-1 Uplink
• 4x 10/100/1000BaseT
• EoS functionality
CEOP1 (Circuit Emulation)
• 8 x E1/G.703 front ports
• 8 x 2 Mbps capacity
• SAToP (Structure agnostic TDM
over packet), unstructured
ETAG1 (Ethernet over PDH)
• 4 x Ethernet 10/100BaseT
• 16 x E1 TDM bus access
• Uplink via n x E1 with MLPPP
or SDH STM-16/STM-4/STM-1
IPSS4 (Voice Media Gateway)
• Protocol SIP (RFC 3261)
• Supports phone, fax, modem
• Uplink via COGE5
LOMI8 (E1 Unit)
• 8 x E1 electrical
• Unstructured (G.703) or
structured (G.704) transmission
Page 21 of 68 © KEYMILE
Chassis Switch Architecture
Page 22 of 68 © KEYMILE
A MileGate subrack is one switch with an expandable
number of Ethernet interfaces
One switch instance has one IP address
As a chassis switch, MileGate supports the following
switching and redundancy protocols
RSTP/MSTP
LACP
ERPS
For advanced Ethernet applications, MileGate supports
Sync. Ethernet
IEEE-1588v2 and is
MPLS-ready
The following units are part of
the switch
COGE5 (central switch)
SUE18 (electrical Ethernet)
SUE12 (elec. or opt.
Ethernet, SFP-based)
SUP12 (electrical Ethernet
with PoE)
NUSA1 (EoS and SDH
STM-16 uplink)
MileGate Chassis Switch Architecture
MileGate is a switch with
a customizable number
of ports
COGE5 (Core unit)
Central Switch and
Ethernet uplink
24 x Ethernet
electrical
48 x Ethernet
electrical
72 x Ethernet
electrical
72 x Ethernet
electrical +
12 x Ethernet
optical
72 x Ethernet
electrical +
24 x Ethernet
optical
All Ethernet ports can be
connected towards the
transport network via the
core unit or via
Ethernet-over-SDH
Switching between:
Ports of Ethernet units
Ports of different
Ethernet units
Ports and Uplink units
Page 23 of 68 © KEYMILE
© KEYMILE Page 24 of 68
MileGate – Fanless Operation
No moving components in the platform for highest reliability
No acoustic noise emission
Operational temperature range -25°C ... +55 °C
Special variants needed for following units (these units need 2 slots)
Core unit (COGE5)
STM-16 unit (NUSA1)
Optical Ethernet unit (SUE12)
Full Ethernet as well as full SDH capabilities in fanless operation
Lowest life-cycle costs
COGE5
NUSA1
SUE12
© KEYMILE Page 25 of 68
MileGate – Management Concept Overview
MileGate management concept is based on a layer approach
Northbound Interfaces (NBI) at MileGate EMS level for
integration in an umbrella management
UNEM for remote management from the NMC/NOC
ECST (Local Craft Terminal for MileGate in dedicated networks)
for configuration and commissioning activities
UNEM MileGate
NBI
(CLI/XML/SNMP)
MileGate CPEs
(SNMP)
DCN
Umbrella
Management
ECST/MCST
(remote access)
ECST/MCST
(local access)
© KEYMILE Page 26 of 68
ECST – MileGate LCT for Dedicated Networks
ECST is the Local Craft Terminal (LCT), tailor made for the user requirements in the
Dedicated Networks market
ECST provides offline configuration that enables commissioning and deployment of a
network or network extension in the office, later deployment to the node
With ECST general support and training is possible
ECST has six main views
Hardware View
Tree View
Layer 2 View
Cross-Connection View
Alarm View
Commissioning View
UNEM – MileGate Management System
Page 27 of 68 © KEYMILE
UNEM manages medium to large MileGate networks
Operates on Linux based workstations and servers
Topological views
Fault + configuration + performance + security management
Automatic path, trail provisioning
Network synchronisation
Status monitoring & diagnostics
Distributed deployment
SNMP as interface to higher level management
Managing of 3rd party equipment
Service Monitoring
Networking package
UNEM – Features & Functionality
Page 28 of 68 © KEYMILE
Graphical & hierarchical network presentation including sections
Configuration of network elements and their units
Fault management – locating of alarms down to sub-unit level
Alarm forwarding via E-Mail
Performance management – retrieval, storage and export of
performance monitoring data
Network wide software download
Synchronisation map – displays the clock signal distribution flow in
the network
Security management – capability to define different operator
classes & access rights based on user profiles
Inventory management – HW & SW information stored in UNEM
database and updated automatically, export via XML file
© KEYMILE Page 29 of 68
MileGate
Network Applications
MileGate in Ethernet Networks
Page 30 of 68 © KEYMILE
MileGate in TDM Networks
Page 31 of 68 © KEYMILE
MileGate Interfaces and Applications Examples
Packet networks with switching functionality for
LAN (office IP + operational IP + telephony IP) interconnect
Video surveillance
Automatic Check-In / Ticket vending machines
Passenger information/announcements and access control
Sales outlets applications (Point-Of-Sales)
Automation information transport
Automatic fare collection
Interconnection with radio transmission equipment
Interconnection of GSM-R / TETRA base stations with BSC
Interconnection of analogue or digital professional radio
Interconnection of analogue train radio
Connection to distant site/location
Ethernet / IP
n x 64 kbps,
2 Mbps E1
MileGate
Interfaces
SHDSL TDM
SHDSL EFM
Optical Ethernet
Wireless
Application Examples
Page 32 of 68 © KEYMILE
Services Distribution Example in a Urban Rail Network
WiFi Router
Video
Surveillance
Large Station
Control Centre
Email Server
PABX
Ethernet or
SDH Ring
Passenger Announcement
Multimedia
Video
Surveillance
Small Stations Information
MileGate
MileGate
Passenger
Announcement
Video Surveillance
Page 33 of 68 © KEYMILE
Services Distribution, Aggregation and Transport in the Airport Environment
Radar
Radar
Video
Surveillance
Airport Terminal
Main Control
Centre
Data Server
PABX
Ethernet or
SDH Ring
Passenger
Announcement
Automatic Check-In
Ticketing machine
Video
Surveillance
Airfield Locations
Passenger
Information
MileGate
MileGate
Page 34 of 68 © KEYMILE
© KEYMILE Page 35 of 68
MileGate
Ethernet Applications
MileGate Applications – Services Distribution and Aggregation in Railway Stations
Safety centre Application monitoring
Traveller’s information
Remotely powered
video surveillance
PABX
Data server
Commercial displays
Ticket vending machine
Audio passenger announcement
Transmission to
remote station
via SHDSL EFM
Electrical Ethernet
Page 36 of 68 © KEYMILE
Gigabit Ethernet with ERPS
(Ethernet Routing
Protection Switching)
MileGate Applications – ERPS in the Transport Network
Page 37 of 68 © KEYMILE
© KEYMILE Page 38 of 68
MileGate Applications – ERPS in the Transport Network
RPL Owner Node
RPL Neighbour Node
Ring Protection Link
The RPL Owner Node blocks
one Port to avoid Rings in
the Ethernet traffic
The neighbour is called
RPL Neigbour Node
If an error occurs, the RPL
Owner node activates the
Ring Protection Link
Let‘s complete the ring
MileGate Applications – Services Distribution and Aggregation in Pump Station
Pipeline
Analogue professional radio
or TETRA base station
Video
Surveillance
Video
Surveillance
Temperature
(SCADA) Pressure
(SCADA)
Ethernet or
SDH Ring
MileGate in a station
Manned
Pump Station
Pressure
(SCADA)
Electrical Ethernet
Optical Ethernet
TDM
Page 39 of 68 © KEYMILE
MileGate Applications – Video Surveillance + Residential Services
Ethernet/IP-
Data Optical Ethernet
for residential
services
Core Network
V+
V–
P+
P–
V+
V–
P+
P–
Telephony
Upper Levels:
Multi-tenant
Residential Apartments
Lower Levels:
Business Stores
SUE12
POTS
SUE16
SUP12
Parking and Building
Video Surveillance
Telephone
Network
Page 40 of 68 © KEYMILE
Electrical Ethernet
with PoE
© KEYMILE Page 41 of 68
MileGate
TDM Applications
MileGate Application – Central Office in TDM-based Multi-Service Networks
Partyline
Modem
SCADA
PLC/RTU
SDH
Network
SUPMx
LOMI8
TUDA1
COGE5
TUGE1
ETAG1
NUSA1
Page 42 of 68 © KEYMILE
MileGate Application – TDM services over PDH/SDH
STIM1: SHDSL TDM line card
LOMI8: 8 E1 Ports
STIM1 n x E1
E1, X.21,
V.35, V.36
Router
CPE
LineRunner DTM
Sensor
Network
AGGREGATION
TRANSPORT
NETWORK
NUSA1
LOMI8
STM-16/4 / 1
REMOTE
APPLICATION
LineRunner
SHDSL REG
Page 43 of 68 © KEYMILE
SDH Network
STIM1 PDH Network
n x SHDSL
MileGate Application – TDM services over Ethernet via SAToP
TRANSPORT
NETWORK
REMOTE
APPLICATION
COGE5
1/10 Gigabit
Ethernet
Packet Network
STIM1: SHDSL TDM
CEOP1: 8 x E1 + TDM over Ethernet
E1, X.21,
V.35, Sensor Network
STIM1
CEOP1
PBX
AGGREGATION
Page 44 of 68 © KEYMILE
MileGate Application – Services via SHDSL
TRANSPORT
NETWORK
REMOTE
APPLICATION
COGE5
1/10 Gigabit
Ethernet
Packet Network
STIM1: SHDSL TDM
SUSE1: SHDSL EFM
SUSE1
STIM1
SHDSL
Commercial Display
Integrated Access Device
Information
Terminal
AGGREGATION
Page 45 of 68 © KEYMILE
MileGate Application – Ethernet services over SDH
TRANSPORT
NETWORK
REMOTE
APPLICATION
NUSA1
SDH Network
STM-16/4 / 1
SUExy: Optical or electrical
Ethernet line card
SUExy
Ethernet
Commercial Display
Integrated Access Device
Information
Terminal
AGGREGATION
Page 46 of 68 © KEYMILE
MileGate Application – Point-to-Multi-Point Circuits with Shared Protection Ring
Station B
Station D
Station A
Station C
E&M
E&M
E&M
E&M
TUEM1
TUEM1
TUEM1
TUEM1
Page 47 of 68 © KEYMILE
© KEYMILE Page 48 of 68
MileGate Value add
& Conclusion
MileGate Value-Add – System Capabilities
Highly modular Chassis Switch Architecture
High-density of Ethernet ports per subrack for electrical or
optical connections
High switching capacity
Variety of Ethernet services
Great variety of TDM interfaces and services
Consolidates packet-based services and TDM-based legacy
services onto a single platform
Hardened to accommodate demanding environmental
conditions
Fanless operation supported
Fully managed
Page 49 of 68 © KEYMILE
MileGate
Functional Units
Page 50 of 68 © KEYMILE
Functional Units for MileGate Subracks – Overview
TUXA1 12-Port FXO
2-wire interfaces
SUPM1 16-Port t/r
interfaces
TELEPHONY
TUEM1 E&M IF with
conferencing
LOMI8/SYNA1* G.703 2Mbps
8/32 Interfaces
DATA
TUDA1 4 serial DCE
interfaces
TUGE1 G.703 64kbps
8 Interfaces
CEOP1* Circuit Emulation over
Ethernet+8 x E1/G.703
Interfaces
ETAG1 Ethernet TDM transp.
4 elec. Ethernet IFs/
16 E1 to TDM bus
INTERWORK
IPSS4* SIP Media Gateway
STIM1
SHDSL TDM
8 Interfaces
SUSE1* SHDSL EFM
32 Interfaces
SHDSL
* In future
release
TRANSPORT
SDH
COGE5(-F) 1/10 GbE Uplink
Core Unit and Core Switch
ETHERNET
SYN4M SDH STM-
4/-1, EoS
NUSA1(-F) SDH STM-
16/4/1, EoS
SUE12(-F) Ethernet opt.or elec.
12 Interfaces
SUP12 12x Ethernet electrical
with PoE+
ETHERNET
SUE18 Ethernet electrical
24 Interfaces
SDH
Page 51 of 68 © KEYMILE
Core Unit – COGE5
Central switch of chassis-switch with 64 Gbps switching capacity
Running network element software
10 GbE/1 GbE network interfaces
2 x optical 10GbE (SFP+), or 1GbE (SFP)
3 x electrical 10/100/1000Base-TC (RJ45)
Management interfaces
Synch I/Os (T3, 2048 kHz)
Link aggregation 802.3ad
VLAN 802.1Q
Supports ITU-T G.8262 Synchronous Ethernet
VLAN tag stacking (Provider Bridge 802.1ad)*
Traffic management (802.1p, per flow rate control)*
RSTP, MSTP and Ethernet ring protection switching
1:1 equipment protection
IGMPv3 snooping*
Supports Chassis Switch Architecture
Usable in subracks MileGate 2510/2310
2 slot
fanless variant
Page 52 of 68 © KEYMILE
* future options
SDH STM16/4/1 Uplink and Ethernet over SDH – NUSA1
Page 53 of 68 © KEYMILE
4 x SFP based SDH interfaces, defined by choice of SFP module
2 x STM-16/STM-4 ports
2 x STM-4/STM-1 ports
4 x RJ45 based Ethernet front ports
Sync-Ethernet (only in Tx direction)
Un-switched operation for EoS Point-To-Point
10 Gbps VLAN aware onboard L2 switch
SDH cross-connects
Higher order cross-connects 384 VC-3, 128 VC-4
Lower order cross-connects 48 VC-3, 1008 VC-12
Up to 32* EoS groups (virtual concatenated groups)
Access to 1GbE star
Supports Chassis Switch Architecture
Usable in subracks MileGate 2510/2310
2 slot
fanless variant
* future option
Ethernet optical/electrical Ethernet Switch Unit – SUE12
12 x FE/GbE subscriber interfaces
100/1000Base-FX (optical, SFP-based)
Up to 240 ports provided out of one MileGate 2510
Access to 1GbE and 10GbE star
EFM compliant 802.3ah
VLAN 802.1Q, VLAN tag stacking 802.1ad (provider bridge)*
Hardware-ready for synchronous Ethernet
Traffic management (802.1p, per flow rate control,
3 colour marking with discarding)*
DSCP snooping
Supports Chassis Switch Architecture
Usable in subracks MileGate 2510/2310
2 slot
fanless variant
Page 54 of 68 © KEYMILE
* future options
High-density electrical Ethernet Switch Unit – SUE18
24 x FE/GbE subscriber interfaces 100/1000BaseT (electrical)
Up to 240 ports provided out of one MileGate 2510
Access to 1GbE and 10GbE star
VLAN 802.1Q, VLAN tag stacking 802.1ad (provider bridge)*
Hardware-ready for synchronous Ethernet
Traffic management (802.1p, per flow rate control, 3 colour marking
with discarding)*
DSCP snooping
Supports Chassis Switch Architecture
Uses 2 slots per line card
Usable in subracks MileGate 2510/2310
Page 55 of 68 © KEYMILE
* future options
PoE+ (Power over Ethernet) Ethernet Switch Unit – SUP12
12x 10/100/1000BASE-T ports functioning as power sourcing
equipment (PSE)
Up to 83 W of accumulate power budget for all PoE ports (measured
at the outputs)
Up to 30 W power output per port (PoE+)
Detection/Classification of Powered Devices (PDs), as specified in
IEEE802.3af/at standards (Class 0 – 4)
Detection and power up of Legacy PDs (non compliant to
IEEE802.3af/at standards)
Access to 1GbE and 10GbE star
Supports Chassis Switch Architecture
Usable in subracks MileGate 2510/2310
Page 56 of 68 © KEYMILE
SDH STM4/STM1 Uplink and Ethernet over SDH – SYN4M
2 x SFP based STM-4/STM-1 ports
2 x SFP based STM-1 ports
4 x Electrical Ethernet ports (100/1000 BaseT)
4 x Ethernet over SDH (EoS) channels
Up to 64 terminated/transparent 2 Mbps channels to backplane
SDH mapping and protection mechanisms
SNCP
EQP
Usable in subracks MileGate 2510/2310
Page 57 of 68 © KEYMILE
MileGate SHDSL TDM Line Card – STIM1
SHDSL TDM subscriber interfaces
8 x SHDSL lines (front connector)
Transport capacity: 8 x 2.048 Mbps
Trunking mode with network clock transmission
1 or 2 pair transmission
CPE support
LineRunner DTM family
G.703 or X.21, V.35, V.36 IFs (clock transparent)
Supports up to 2 regenerators per line
Remote power modes
No power supplied
Wetting current
Power feeding
Usable in subracks MileGate 2510/2310
Page 58 of 68 © KEYMILE
SHDSL EFM Line Card – SUSE1
32 ports SHDSL (EFM IEEE 802.3ah)
ITU-T G.991.2
SHDSL (2.3 Mbps)
SHDSL.bis (5.7 Mbps) Annex G extended rates
EFM pair bonding (up to 4 pairs), up to 22.8 Mbps
Optional remote powering (separate power unit)
Usable in subracks MileGate 2510/2310
Page 59 of 68 © KEYMILE
MileGate E1 Line Card – LOMI8
Page 60 of 68 © KEYMILE
Physical front interface
8 x E1 front ports electrical (G.703/G.704)
Backplane access
8 x E1 to MileGates TDM bus
Standards
ITU-T recommendations G.703, G.704, G.823
Performance monitoring according to G.826
Usable in subracks MileGate 2510/2310
MileGate High Density VC-12 Line Card – SYNA1
32 x E1 front ports electrical (G.703)
2 x SFP-based STM-1/STM-4 interfaces
Integrated E1 to VC12 mapper
SETS and PETS
VC12 SNCP/SNCP-I/SNCP-N traffic protection
1+1 equipment protection
Usable in subracks MileGate 2510/2310
Example picture
Page 61 of 68 © KEYMILE
MileGate 64 kbps G.703 Line Card – TUGE1
8 x 64 kbps G.703 front ports electrical (G.703)
Interoperable with
all MileGate TDM line cards
UMUX GECOD
XMP1 Sub-Modul G.703, Co-directional
Usable in subracks MileGate 2510/2310
Page 62 of 68 © KEYMILE
E1 Circuit Emulation over Packet Card – CEOP1
Gateway between TDM bus and Ethernet star
8 ports Circuit Emulation over Packet card
Gateway between TDM bus and Ethernet star
8 x E1/G.703 front ports
8 x 2 Mbps capacity
Methods supported
SAToP (Structure agnostic TDM over packets), unstructured
Clocking mode
Adaptive
Usable in subracks MileGate 2510/2310
Page 63 of 68 © KEYMILE
E&M Ports with scalable Conferencing – TUEM1
Scalable conferencing onboard engine
Up to 32 participants (total per unit) local and remote
Up to 10 conferences with up to 17 participants
Compatibility and interoperability with:
MileGate, mixed conferences with: SUPx4
UMUX, mixed conferences with NEMCA / NEMGE / EXLAN / SUBHx /
PHLCx
Supported network topologies
PtP, PtMP and MPtMP
Protection
1+1 path protection
Shared protection ring (SPR)
EQP for centralised conferencing topologies
Usable in subracks MileGate 2510/2310
Page 64 of 68 © KEYMILE
Serial Data Interfaces Unit – TUDA1
Page 65 of 68 © KEYMILE
4 x independent serial DCE interfaces:
V.35 (n x 64 kbps and subrates)
X.24/V.11 (n x 64 kbps and subrates)
V.24/V.28 (1...2 x 64 kbps and subrates)
RS-485 (asynchronous bus structure) in
4 wire mode
2 wire mode
1x 10/100BASE-T Ethernet interface (RJ-45)
TDM bus access (up to 1984 kbps access per port)
Usable in subracks MileGate 2510/2310
FXO 2-Wire Interface Unit – TUXA1
Physical front interface
12-Port FXO 2-wire interfaces
DTMF and Pulse Dialling
CLIP Support
1+1 Path Protection
Configurable Voice Levels
Compatible with
UMUX units SUBHx/PHLCx/SUBLx
MileGate units SUPM1 and SUPM4
UMUX unit NEMCA/NEMSG for conference
MileGate unit TUEM1 for conference
Usable in subracks MileGate 2510/2310
Page 66 of 68 © KEYMILE
Ethernet Aggregation and Ethernet over TDM transport – ETAG1
Ethernet aggregation for transport over TDM or Ethernet
Interfaces
4 x electrical Ethernet 10/100BaseT
16 x E1 TDM Access (SNCP & 1+1 path protection)
TDM uplink of Ethernet services
n x E1 with MLPPP
SDH STM-16/STM-4/STM-1
Ethernet uplink of Ethernet services via COGE5
n x 64 kbps up to 2 Mbps Ethernet leased line aggregation switching
and routing from
remote Ethernet ports via DSL with STIMx
serial data ports connected to routers via TUDA1
Usable in subracks MileGate 2510/2310
Page 67 of 68 © KEYMILE
Telephony (FXS) Line Card – SUPM1
Physical front interface
16 analogue telephony (FXS) interface (acc. to ITU-T Q.552)
Input and output overvoltage protection (acc. to ITU-T K.20)
TDM bus access
Functions/mode of operation
SIP via IPSS4
Mercury CAS
Other function: Analogue voice/FAX/modem services, onboard ringing
generator, onboard line-test function, DTMF and pulse dialling,
polarity reversal etc.
Usable in subracks MileGate 2510/2310
Page 68 of 68 © KEYMILE