milwaukee intermodal station · mkbd marker board mo masonry opening mp manufactured metal panel...

O

Op43

18o

94p

p90 pp94

90p94p

41o

90

51o

94p

p43

o41Menomonie Falls

Appleton

Washington

Waukesha

Waukesha Co.

Racine Co.

Kenosha Co.

Platteville

Janesville

Monroe Beloit Walworth Co.

CenterRichland

Richland Co.

Grant Co.

Prairie duChien

Crawford Co.

Vernon Co.

LaCrosse Co. Monroe Co.

La Crosse

Pierce Co.

Pepin Co.

Buffalo Co.

Trempealeau Co.

Tomah

Eau Claire

Portage

Rock Co.

Dodgeville

Lafayette Co.

Iowa Co.

Green Co.

Dane Co.

Madison

Whitewater

Jefferson Co.

WatertownCo.

du LacFond

Beaver Dam

PointStevens

RapidsWisconsin

Marshfield

Wausau

Oshkosh

Shawano

Waupaca Co.

Shawano Co.

Outagamie Co.

New London

Kenosha

Ozaukee Co.

Milwaukee Co.

Racine Co.

Racine

Milwaukee

Port Washington

Sheboygan

BendWest

Manitowoc

Kewaunee Co.

Door Co.

BayGreen

Marinette Co.

Oconto Co.

Price Co.

Ashland

Barron Co.

Washburn Co.

St. Croix Co.

Polk Co.

Dunn Co.

Burnett Co.

Rice Lake

Chippewa Co.

Chippewa

Rusk Co.

Taylor Co.

Sawyer Co.

Superior

Douglas Co. Bayfield Co. Ashland Co.

Langlade Co.

Rhinelander

Tomahawk

Lincoln Co.

Oneida Co.

Park Falls

Menominee Co.

Forest Co. Florence Co.

Iron Co.

Vilas Co.

Marinette

Milwaukee, WisconsinMilwaukee, County

17400 West Capitol DriveBrookfield, WI 53045Phone: 414.778.1700Fax: 414.778.2360E-Mail: [email protected]

REV DATE DESCRIPTION OF ISSUE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE

MILWAUKEE INTERMODAL

STATION REHABILITATION

PROJECT 2019

TITLE SHEET

02/22/2019

218089.00

T000

RD RD

MILWAUKEE INTERMODAL STATION REHABILITATION PROJECT 2019MILWAUKEE INTERMODAL STATION433 W ST. PAUL AVENUEMILWAUKEE, WI 53203

WISCONSIN DEPARTMENT OF TRANSPORTATION4822 MADISON YARDS WAY, 6TH FLOOR SOUTHMADISON, WI 53705

PROJECT CONTACTS:

ELECTRICAL:

17400 WEST CAPITOL DRIVE

BROOKFIELD, WI 53045

PHONE: 414.778.1700FAX: 414.778.2360

E-Mail: [email protected]

MECHANICAL:



PHONE: 414.778.1700FAX: 414.778.2360


STRUCTURAL:

555 SOUTH RIVER STREET

JANESVILLE, WI 53548

PHONE: 608.756.2326FAX: 608.756.0464

ARCHITECTURAL:

207 EAST MICHIGAN STREET - SUITE 400

P.O. BOX 510663

MILWAUKEE, WI 53203PHONE: 414.220.9640

NTS1PROJECT LOCATOR MAP

NTS2PROJECT SITE MAP

NORTH NORTH

SHEET INDEX

No. TITLE

T000 TITLE SHEET

A001 GENERAL INFORMATION PARTITION TYPES

A010 LIFE SAFETY PLANS

A102 DEMOLITION PLAN - LEVEL 02

A202 NEW WORK PLAN - LEVEL 02

A700 INTERIOR ELEVATIONS

A900 ROOM FINISH/DOOR SCHEDULE

S200 EQUIPMENT FRAMING PLAN

P000 PLUMBING SYMBOLS, ABBREVIATIONS & SHEET INDEX

P200 PLUMBING BASEMENT OVERALL PLANS

P201 PLUMBING FIRST FLOOR OVERALL PLANS

P202 PLUMBING SECOND FLOOR OVERALL PLANS

P204 PLUMBING ROOF PLAN OVERALL PLANS

M000 MECHANICAL SYMBOLS, ABBREVIATIONS, SHEET INDEX

M100 PENTHOUSE MECH. DEMOLITION PLANS

M200 PENTHOUSE MECH. NEW CONSTRUCTION PLANS

M210 BASEMENT AND SECOND MECH. FLOOR PLANS

M500 MECHANICAL DETAILS


M600 MECHANICAL SCHEDULES

E000 SYMBOLS, ABBREVIATIONS & SHEET INDEX

E200 PENTHOUSE - ELECTRICAL

E210 BASEMENT AND SECOND FLOOR PLAN - ELECTRICAL

E400 ONE LINE DIAGRAM

E600 ELECTRICAL SCHEDULES PLUMBING:



PHONE: 414.778.1700FAX: 414.778.2360


1 02/22/19 BIDDING DOCUMENTS

DRAWING SYMBOLS KEY

EXTERIOR ELEVATION REFERENCEREFER TO SHEET NUMBER INDICATED INSIDE OF SYMBOL

INTERIOR ELEVATION REFERENCEREFER TO SHEET NUMBER INDICATED INSIDE OF SYMBOL

DETAIL REFERENCEREFER TO SHEET NUMBER INDICATED IN BOTTOM OF SYMBOL

SECTION REFERENCEREFER TO SHEET NUMBER INDICATED IN BOTTOM OF SYMBOL

ROOM NAME/NUMBER REFERENCEREFER TO ROOM FINISH SCHEDULE

DOOR REFERENCEREFER TO DOOR SCHEDULE

ELEVATION REFERENCE

INTERIOR PARTITION TYPE REFERENCEREFER TO INTERIOR PARTITION TYPES

WINDOW TYPE REFERENCEREFER TO WINDOW TYPE ELEVATIONS

NEW WORK KEY NOTE REFERENCEREFER TO NEW WORK KEY NOTES

CEILING HEIGHT REFERENCE

COLUMN GRID REFERENCE

SPECIALTY EQUIPMENT TAG

REVISION REFERENCEREFER TO TITLE BLOCK

XX

DEMOLITION KEY NOTE REFERENCEREFER TO DEMOLITION KEY NOTES

XXX

XXXX' - XX"

X

XXX

XX

X

X

X

X

X

ROOM NAME2000

X

X

XXX

SIM

X

XXX

SIM

X EXTERIOR ELEVATION KEY NOTE REFERENCEREFER TO EXTERIOR ELEVATION KEY NOTES

X

AB AIR BARRIERACT ACOUSTICAL CEILING TILEADJ ADJACENTA.F.F. ABOVE FINISHED FLOORALUM ALUMINUMAP ACCESS PANELAWP ACOUSTICAL WALL PANEL

BL BORROWED LIGHTBLKG BLOCKINGBLKHD BULK HEADB.O. BOTTOM OFBRG BEARINGBRZ BRONZE

CH COAT HOOKCHKBD CHALKBOARDCJ CONTROL/CONSTRUCTION JOINTCL CENTER LINECLG CEILINGCLR CLEARANCE / CLEARCMU CONCRETE MASONRY UNITCONC CAST-IN-PLACE CONCRETECONT CONTINUOUSCONTR CONTRACTORCORR CORRIDORCPT CARPETCRK CORKCS COPING SYSTEMCT CERAMIC TILECTB CERMIC TILE BASECW CURTAIN WALL SYSTEM

DCS DIAPER CHANGING STATIONDIM DIMENSIONDL DEAD LOADDR DOORDS DOWN SPOUTDWG DRAWING

EIFS EXTERIOR INSULATION FINISH SYSTEMEL ELEVATIONELEC ELECTRICALELEV ELEVATOREQ EQUALEQUIP EQUIPMENTERF EPOXY RESINOUS FLOORINGESS EXTERIOR SOFFIT SYSTEMEST ESTIMATEEWS EXTERIOR WALL SYSTEMEXJ EXPANSION JOINTEXP EXPOSED CONSTRUCTIONEXTG EXISTING

FD FLOOR DRAINFDN FOUNDATIONFE FIRE EXTINGUISHERFEP FINISHED END PANELFF FINISHED FLOORFL MAT FLOOR MAT AND FRAMEFLR FLOORFR FRAMEFRP FIBERGLASS REINFORCED POLYESTERFSTOP FIRESTOPPINGFTG FOOTINGFWS FOUNDATION WALL SYSTEM

GALV GALVANIZEDGB GRAB BARGFI GROUND FAULT INTERRUPTERGFRC GLASS FIBER REINFORCED CONCRETEGL GLASS, GLAZINGGMU GLASS MASONRY UNITG GROUTGROM GROMMETGT GLASS TILEGWB GYPSUM WALL BOARD

HB HOSE BIBBHD ELECTRIC HAND DRYERHM HOLLOW METAL DOORS AND FRAMESHP HIGH POINTHPC HIGH PERFORMANCE COATINGSHR HOUR

IAW INTERIOR ARCHITECTURAL WOODWORKINSUL INSULATIONIWP IMPACT WALL PROTECTION

JAN JANITORJNT JOINTJST JOIST

LF LINEAR FOOTLL LIVE LOADLMC LINEAR METAL CEILINGLP LOW POINTLVR LOUVERLWC LINEAR WOOD CEILING

MAS MASONRYMAT MATERIALMB MOISTURE BARRIERMECH MECHANICALMEP MECHANICAL / ELECTRICAL / PLUMBINGMET METALMIR MIRRORMKBD MARKER BOARDMO MASONRY OPENINGMP MANUFACTURED METAL PANELMPC METAL PAN CEILINGMR MOISTURE RESISTANTMTD MOUNTED

NTS NOT TO SCALE

OC ON CENTEROCD OVERHEAD COILING DOOR OCG OVERHEAD COILING GRILLE

OFD OVERHEAD FABRIC DOOR OFCI OWNER FURNISHED CONTRACTOR INSTALLEDOFOI OWNER FURNISHED OWNER INSTALLED

PC PRECAST CONCRETEPLAM PLASTIC LAMINATEPPT PRESSURE TREATED WOODPREFIN PREFINISHEDPRT PARTITIONPS PROJECTION SCREENP+S CLOSET POLE AND SHELFPT PAINTPTD PAPER TOWEL DESPENSER

QT QUARRY TILEQTB QUARRY TILE BASE

R RISERRAD RADIUSRCP REFLECTED CEILING PLANRD ROOF DRAINREC RECESSEDRECD RECEIVEDREFER REFERENCEREQD REQUIREDRF RESILIENT FLOOR SYSTEMSRF-WB RESILIENT FLOOR WALL BASERO ROUGH OPENINGRS ROOF SYSTEMRVL REVEAL

SA SMOKE ALARMSC SEALED CONCRETESCD SUN CONTROL DEVICESCHED SCHEDULESD SOAP DISPENSERSF SUBFLOORSHTG SHEATHINGSIM SIMILARSND SANITARY NAPKIN DISPENSERSNV SANITARY NAPKIN VENDERSOD SECTIONAL OVERHEAD DOORSQ FT SQUARE FOOTSSF SOLID SURFACE FABRICATIONSSG STRUCTURAL SILICONE GLAZEDSST STAINLESS STEELST STONESTA STAINSTB STONE TILE BASESTC SOUND TRANSMISSION CLASSSTL STEELSTOR STORAGESUSP SUSPENDED

T TREADTB TOILET & BATH ACCESSORIESTER TERRAZZOT&G TONGUE & GROOVET.O. TOP OFTPD TOILET PAPER DISPENSERYTR TOILET ROOMTWF THROUGH WALL FLASHINGTYP TYPICAL

UG UNDER LAVATORY GUARDUNO UNLESS NOTED OTHERWISE

VDS VISUAL DISPLAY SURFACESVEST VESTIBULEVNR VENEERVTR VENT THROUGH ROOF

WC WALL COVERINGWD WOODWDW WINDOWWL WIND LOADWDP WOOD PANELWP WATER PROOFINGWRC WAST RECEPTICALWT WINDOW TREATMENT

ABBREVIATION KEY:

INSTALL 20 GA CLIP ANGLES TO SUBSTRATE, SEE NOTES BELOW FOR SPACING CLIP ANGLE AT TOP OF STUD IN ADDITION TO SPACINGS NOTED BELOW.

THERMAL INSULWIDTH

(SUBSCRIPT T) & R VALUE

3 5/8" 4 1/4"3 1/2"R=11

METAL STUD FURRINGF FIRE RATING: 0 HR

PROVIDE BRACES TO BACK-UP AT VERT. MIDPOINT OF STUD WHERE UNBRACED HEIGHT EXCEEDS 12'-0"

SCALE: 1 1/2" = 1'-0"

NOTE:REFER TO PARTITION TYPE SUBSCRIPT KEY FOR MORE INFORMATION AND REQUIREMENTS.

PARTITIONTYPE

STUDWIDTH

PARTITIONWIDTH

ACOUSTICALINSULATION

WIDTH (SUBSCRIPT A) NOTES

3 1/2"

AT FULL HEIGHT REQUIREMENTS, ATTACH 3" DEEP METAL DEFLECTION TRACK TO STRUCTURAL CEILING. HOLD METAL STUDS AND GWB 5/8" BELOW STRUCTURAL CEILING. PROVIDE PERIMETER SEALANT AT STRUCTURAL CEILING TERMINATIONS AND AT ALL OTHER PENETRATIONS. HOLD GWB ANCHORAGES 3 1/2" BELOW STRUCTURAL CEILING TO FACILITATE SLIP-JOINT ACTION.

SCHEDULED CEILING

ONE LAYER 5/8" GWB APPLIED VERTICALLY, JOINTS STAGGERED, TYP.

METAL STUDS: PROVIDE 25 GAUGE @ 16"O.C., UNLESS NOTED OTHERWISE, OR OTHER GAUGE AND SPACING REQUIRED TO COMPLY WITH DEFLECTION CRITERIA. PROVIDE MINIMUM 20 GAUGE AT ABUSE RESISTANT GWB OR AS RECOMMENDED BY MANUFACTURER.

TAPERED EDGE OF GWB SHALL NOT BE INSTALLED ALONG BOTTOM EDGE. BOTTOM EDGE MUST BE FINISHED FLUSH TO RECEIVE SCHEDULED BASE.

SCHEDULED BASE

HOLD GWB 3/8" FROM STRUCTURAL FLOOR. PROVIDE PERIMETER SEALANT AT STRUCTURAL FLOOR TERMINATIONS AND AT ALL PENETRATIONS.

F3-

SILL

PLAN

HEAD

BRACE TO STRUCTURE AS REQUIRED TO COMPLY WITH DEFLECTION CRITERIA

NA NA

STC @ 0,1HR

W/OINS

W/INS

F6- 6" 6 5/8"

6 1/4"R=19

PROVIDE BRACES TO BACK-UP AT VERT. MIDPOINT OF STUD WHERE UNBRACED HEIGHT EXCEEDS 12'-0"

6 1/4" NA NA

SCALE: 1 1/2" = 1'-0"


PARTITIONTYPE

STUDWIDTH

PARTITIONWIDTH

0,1HR; 2HR

ACOUSTICALINSULATION

WIDTH (SUBSCRIPT A)

STC @ 0,1HR

W/OINS

W/INS

STC @ 2HR

W/OINS

W/INS NOTES

3 5/8"4 7/8"/6 1/8" 3 1/2" 40 50 45 56

METAL STUD PARTITIONA FIRE RATING: 0,1,2 HR - UL #U419

1 1/2" BATT INS. REQ. @ 1HR RATED PARTITION

AT FIRE RATED PARTITIONS INSTALL UL RATED FIRESTOPPING JOINT SYSTEM.

AT FULL HEIGHT REQUIREMENTS, ATTACH 3" DEEP METAL DEFLECTION TRACK TO STRUCTURAL CEILING. HOLD METAL STUDS AND GWB 5/8" BELOW STRUCTURAL CEILING. PROVIDE PERIMETER SEALANT AT STRUCTURAL CEILING TERMINATIONS AND AT ALL OTHER PENETRATIONS. HOLD GWB ANCHORAGES 3 1/2" BELOW STRUCTURAL CEILING TO FACILITATE SLIP-JOINT ACTION. AT FIRE RATED PARTITIONS PROVIDE UL TESTED DEFLECTION TRACK ASSEMBLY.

SCHEDULED CEILING

ONE LAYER 5/8" GWB EACH SIDE AT 0HR AND 1HR RATED PARTITIONS. TWO LAYERS 5/8" GWB EACH SIDE AT 2HR RATED PARTITIONS. GWB APPLIED VERTICALLY, JOINTS STAGGERED, TYP.

METAL STUDS: PROVIDE 25 GAUGE @ 16"O.C., UNLESS NOTED OTHERWISE, OR OTHER GAUGE AND SPACING REQUIRED TO COMPLY WITH DEFLECTION CRITERIA. PROVIDE MINIMUM 20 GAUGE AT ABUSE RESISTANT GWB OR AS RECOMMENDED BY MANUFACTURER.

TAPERED EDGE OF GWB SHALL NOT BE INSTALLED ALONG BOTTOM EDGE. BOTTOM EDGE MUST BE FINISHED FLUSH TO RECEIVE SCHEDULED BASE.

SCHEDULED BASE

HOLD GWB 3/8" FROM STRUCTURAL FLOOR. PROVIDE PERIMETER SEALANT AT STRUCTURAL FLOOR TERMINATIONS AND AT ALL PENETRATIONS.

BATT INSULATION REQUIRED AT SOME RATED WALLS. SEE CHART BELOW.

A3-

SILL

PLAN

HEADBRACE TO STRUCTURE AS REQUIRED TO COMPLY WITH DEFLECTION CRITERIA

SUBSCRIPT (-)EXTEND TOTAL PARTITION TO STRUCTURE

SUBSCRIPT (A):ACOUSTICAL INSULATION

PARTITION TYPE SUBSCRIPT KEYNOTE: TYPE A PARTITION IS SHOWN HERE AS A GENERAL REPRESENTATION. THESE SUBSCRIPTS MODIFY BASIC PARTITION TYPE CONSTRUCTION REQUIREMENTS AND APPLY TO ALL PARTITION TYPES.

A

-

A

A

SUBSCRIPT (0):STUDS & GYP 6" ABOVE CEILING

SUBSCRIPT (T):THERMAL INSULATION

6"

A

0

A

T

ACT

SCALE: 1 1/2" = 1'-0"

PARTITIONTYPE

BLOCKWIDTH

7 5/8"

FIRE RESISTANCEHOLLOW

CORESOLIDCORE

1HR2HR3HR

4HR

STC @ DENSITY 135pcfHOLLOW

UNITSGROUTFILLED

SANDFILLED

49 57 55

NOTES

UL #U901 - 4 HRUL #U904 - 3 HRUL #U905 - 2 HR

MASONRY PARTITIONM FIRE RATING: 0,1,2,3,4 HR - UL #U---

M8-

CONCRETE MASONRY UNITS

SCHEDULE BASE

EXISTING MASONRY PARTITION


SILL

PLAN

HEAD

GROUT SOLID WHERE REQUIRED BY RATED ASSEMBLY, SPECIFIED, OR NOTED ON DRAWINGS.



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

GENERALINFORMATION/

PARTITIONTYPES

02/22/2019

218089.00

A001

Author Approver

GENERAL INFORMATION NOTES TO CONTRACTOR

1. THESE DRAWINGS ARE DIAGRAMMATIC AND SHOW THE INTENT OF THE PROJECT, BUT DO NOT NECESSARILYINDICATE ALL MATERIALS OR METHODS OF CONSTRUCTION. ALL CONTRACTORS ARE RESPONSIBLE TO REVIEWTHE DOCUMENTS THOROUGHLY, AND FOR PROVIDING ALL MATERIALS AND MEANS OF CONSTRUCTIONNECESSARY FOR THE COMPLETION OF THE WORK IN ACCORDANCE WITH THE INTENT OF THE DRAWINGS.

2. ALL WORK OF ALL TRADES, SHALL BE COMPLETED IN ACCORDANCE WITH ALL LOCAL GOVERNING CODES ANDORDINANCES.

3. EACH CONTRACTOR SHALL COORDINATE THEIR WORK WITH THE OWNER, THE OWNER'S OTHER CONTRACTORS,AND ALL OTHERS AT THE SITE.

4. EACH CONTRACTOR IS TO OBTAIN AND PAY FOR PERMITS, LICENSES, FEES, ETC. AS REQUIRED FOR THECOMPLETION OF THEIR PORTION OF WORK.

5. EACH CONTRACTOR SHALL VERIFY ALL CONDITIONS AND DIMENSIONS AT THE SITE TO SATISFY THEIR EXECUTIONOF THE WORK. ANY DISCREPANCIES SHALL BE REPORTED TO THE ARCHITECT PRIOR TO PROCEEDING. NEITHERTHE OWNER NOR THE ARCHITECT ASSUMES RESPONSIBILITY FOR CONDITIONS OR DIMENSIONS SHOWN ASEXISTING.

6. IF ANY CONTRACTOR OBSERVES THAT ANY OF THE CONTRACT DOCUMENTS ARE AT VARIANCE WITH APPLICABLELAWS, STATUTES, BUILDING CODES, OR ORDINANCES, THEY SHALL PROMPTLY NOTIFY THE ARCHITECT.

7. ALL HOLES FOR PLUMBING, ELECTRICAL, HVAC, FIRE PROTECTION CONDUIT, PIPING, OR DUCTWORK ARE TO BEREPAIRED BY THE ASSOCIATED TRADE.

8. ALL TRADES SHALL TAKE CARE TO MAKE HOLES ONLY AS LARGE AS NECESSARY. DO NOT PUNCH OR POUNDHOLES IN WALL, FLOOR, OR ROOF DECK.

9. ANY HOLES OR PENETRATIONS THROUGH FIRE RATED CONSTRUCTION SHALL BE APPROPRIATELY FIRE STOPPED,DAMPENED, OR SEALED AS REQUIRED BY CODE.

10. EACH CONTRACTOR SHALL INCLUDE THE NECESSARY DEMOLITION, REMOVAL, AND CUTTING/PATCHING OF ALLMATERIAL AS REQUIRED TO PERFORM THEIR WORK.

11. REMOVAL OF ALL HAZARDOUS CONTAINING MATERIALS IS THE SOLE RESPONSIBILITY OF THE OWNER. SHOULDANY MATERIALS BE ENCOUNTERED DURING ANY OF THE CONSTRUCTION PHASES CONTAINING, OR SUSPECTEDTO BE HAZARDOUS: CONTRACTOR SHALL STOP WORK IMMEDIATELY AND NOTIFY OWNER AND ARCHITECT.

12. DO NOT SCALE DRAWINGS.13. EACH CONTRACTOR SHALL PATCH, LEVEL, AND PREPARE ALL WALLS AND FLOORS AS SCHEDULED TO RECEIVE

NEW FINISHES.

GENERAL INTERIOR PARTITION NOTES TO CONTRACTOR

1. REFER TO PARTITION DETAILS FOR CONSTRUCTION REQUIREMENTS OF PARTITION TYPES. REFER ALSO TOPARTITION TYPE SUBSCRIPT KEY FOR MODIFICATIONS TO BASIC PARTITION TYPE. IF NO PARTITION TYPE TAG ISINDICATED ON THE PLANS FOR A SPECIFIC SECTION OF METAL STUD WALL, PROVIDE PARTITION TYPE 'A3,SUBSCRIPT -,A'. IF NO PARTITION TYPE TAG IS INDICATED ON THE PLANS FOR A SPECIFIC SECTION OF MASONRYWALL, PROVIDE PARTITION TYPE 'M8', NOTE: SOME PARTITION TYPES DESCRIBED MAY NOT BE USED ON THISPROJECT.

2. REFER TO 'PARTITION TYPE SUBSCRIPT KEY' FOR SYMBOLS AND SUBSCRIPTS USED TO IDENTIFY ADDITIONALREQUIREMENTS OR MODIFICATIONS TO BASIC PARTITION TYPE.

3. PARTITION DETAILS DESCRIBE GENERAL REQUIREMENTS FOR PARTITIONS. REFER TO THE MANUFACTURERS'SPECIFICATIONS AND REQUIREMENTS OF APPLICABLE TESTING AGENCIES FOR SPECIFICS OF PARTITIONCONSTRUCTION.

4. ALL PENETRATIONS IN ACOUSTICALLY RATED, FIRE RATED, AND SMOKE RATED PARTITIONS AND CONNECTIONS OFTHE PARTITIONS TO OTHER PORTIONS OF THE WORK SHALL BE IN ACCORDANCE WITH MANUFACTURER'SRECOMMENDED DETAILS AND IN COMPLIANCE WITH APPLICABLE TESTING AGENCY REQUIREMENTS.

5. ALL PENETRATIONS IN ACOUSTICALLY RATED PARTITIONS ARE TO BE ACOUSTICALLY SEALED TO MAINTAIN STCASSEMBLY RATINGS.

6. FIREWALLS, FIRE PARTITIONS, FIRE BARRIERS OR ANY WALL REQUIRED TO HAVE PROTECTED OPENINGS ORPENETRATIONS SHALL BE IDENTIFIED PER SPECIFICATIONS AND CODE.

7. WHERE FIREWALLS, FIRE PARTITIONS, FIRE BARRIERS OR ANY WALL REQUIRED TO HAVE FIRE RATING IS CALLEDOUT IN THE DRAWINGS, EXTEND THE RATING UP TO THE NEXT FIRE RATED PARTITION IN A MANNER THATENSURES A CONTINUOUS FIRE SEPARATION AND MAINTAINS THE INTEGRITY OF THE FIRE RATED PARTITION.PROVIDE FIRE RESISTIVE JOINT SYSTEMS PER SPECIFICATIONS.

8. AT PLENUM RATED CEILINGS, ALL PENETRATIONS ARE TO BE SEALED TO MAINTAIN PLENUM CEILINGS AIRTIGHTNESS / 5PSF.

9. INSTALL BLOCKING OR BACKER MATERIAL FOR ATTACHMENT/MOUNTING OF ALL WALL HUNG ITEMS OR EQUIPMENTDESCRIBED IN THE DOCUMENTS, WHETHER CONTRACTOR FURNISHED OR OWNER FURNISHED.

10. COORDINATE WITH OWNER THE LOCATION OF BLOCKING FOR OWNER SUPPLIED ITEMS.11. WHERE PARTITIONS AND/OR FURRING MEET, MAINTAIN SURFACES FLUSH AND PLUMB.12. PROVIDE 5/8" GWB UNLESS NOTED OTHERWISE.13. PROVIDE MOISTURE RESISTANT GYPSUM BOARD AT ALL TOILET ROOMS AND WET AREAS UNLESS NOTED

OTHERWISE.14. INSTALLATION OF ALL TYPES OF GYPSUM BOARD SHALL CONFORM TO REQUIREMENTS FOR FIRE RATINGS AND

ACOUSTICAL RATINGS.15. ALL GYPSUM WALL BOARD IS TO BE INSTALLED WITH THE LONG DIMENSION RUNNING HORIZONTALLY UNLESS THE

REQUIREMENT FOR THE FIRE RATING AND ACOUSTICAL RATINGS DIFFER.16. U.O.N. PROVIDE 4" AT DOOR JAMBS (FROM EDGE OF FRAME TO FINISHED FACE OF WALL)17. TYPICAL FLOOR PLAN DIMENSIONS ARE TO THE FACE OF THE OUTERMOST LAYER OF GYPSUM BOARD UNLESS

NOTED AS TO CENTERLINE OF PARITION.18. WHERE A CLEAR DIMENSION OR OPENING IS REQUIRED OR NOTED, MEASURE DIMENSION TO FACE OF PARTITION

FINISH.19. WHERE THERMAL INSULATION IS NOTED BY SUBSCRIPT, INSTALL VAPOR RETARDER. SEAL AT ALL TERMINATIONS,

PENETRATIONS, AND SEAMS. INSTALL FELT ISOLATION STRIPS BETWEEN CLIP ANGLE AND SUBSTRATE.

ARCHITECTURALA001 GENERAL INFORMATION/ PARTITION TYPESA010 LIFE SAFETY PLANSA102 DEMOLITION PLAN - LEVEL 02A202 NEW WORK PLAN - LEVEL 02A700 INTERIOR ELEVATIONSA900 ROOM FINISH/DOOR SCHEDULE

SHEET INDEX:

larjt

Text Box


1 1

2 2

UP

11

11

11

1 1

11

1 11

11

11

11

22

222

2

1 1

11

1 1

2 2

22

2 2

11

11

11

11

11

11

22

112

2

LIFE SAFETY PLAN SUMMARY

WISCONSIN ENROLLED COMMERCIAL BUILDING CODE - IBC 2015

2015 INTERNATIONAL EXISTING BUILDING CODEWISCONSIN CODE AMENDMENTS COMM 66 - SPS 366

INTERNATIONAL CODE COUNCIL - ACCESSIBLE AND USEABLE BUILDING AND FACILITIES STANDARDS - ANSI 117.1

UNIFORM FEDERAL ACCESSIBILITY STANDARDS (UFAS) OR AMERICAN WITH DISABILITY ACT - ACCESSIBILITY GUIDELINES FOR BUILDINGS AND FACILITIES (ADDAG).

LIFE SAFETY CODE - NFPA-101

SAFETY & HEALTH - OSHA CFR PART 1926.62

ARCHITECT/ENGINEER CONTRACTOR DESIGN REQUIREMENTS - 48CFR PART 36

2015 INTERNATIONAL BUILDING CODE WISCONSIN AMENDMENTS COMM 62 - SPS 362

2015 INTERNATIONAL ENERGY CONSERVATION CODEWISCONSIN CODE AMENDMENTS COMM 63 - SPS 363

2015 INTERNATIONAL MECHANICAL CODE WISCONSIN CODE AMENDMENTS COMM 64 - SPS 364

205 INTERNATIONAL FUEL GAS CODE WISCONSIN CODE AMENDMENTS COMM 65 - SPS 365

2011 NATIONAL ELECTRICAL CODE NECWISCONSIN CODE AMENDMENTS SPS 316

APPLICABLE CODESARCHITECTURAL:

PLUMBING:

ENERGY:

MECHANICAL:

FUEL:

ELECTRICAL:

LIFE SAFETY PLAN KEY

EXIT WIDTH PROVIDED

FIRE EXTINGUISHER - MAXIMUM TRAVEL DISTANCE - 75 FEET - SEE SPECIFICATIONS FOR FIRE EXTINGUISHER TYPE.

EXIT SIGN

ACCESSIBLE ROUTE

EXIT TRAVEL DISTANCE

ONE HOUR RATED FIRE PARTITION OR WALL

TWO HOUR RATED FIRE PARTITION OR WALL

XX"

FEC

IEBC SUMMARY:NO CHANGE OF OCCUPANCY. EXISTING SPACE USED AS BUSINESS OCCUPANCY. NEW SPACE USED AS BUSINESS OCCUPANCY.

IEBC 101.5: COMPLIANCE METHOD: WORK AREA COMPLIANCE METHOD (CHAPTERS 4 - 12).

IEBC 403: PROJECT FOLLOWS A LEVEL 2 ALTERATION AS THE SPACE IS BEING RECONFIGURED BUT THE WORK DOES NOT EXCEED 50% OF THE AGGREGATE AREA OF THE BUILDING.

IEBC 704 MINIMUM NUMBER OF EXITS ARE BEING MET WITH THE RENOVATION PER OCCUPANT LOAD OF THE FLOOR.

(IBC 2015) TABLE 506.2 ALLOWABLE AREAOCCUPANCY TYPE B, SPRINKLERED, CONSTRUCTION TYPE I-B = 23,000 SF

(IBC 2015) TABLE 601, CONSTRUCTION TYPE:EXISTING BUILDING CONSTRUCTION - TYPE I-BFIRE RESISTANCE RATINGS FOR:

PRIMARY STRUCTURAL FRAME = 2 HOURSEXTERIOR BEARING WALLS = 2 HOURSNON BEARING INTERIOR WALLS = 0 HOURSFLOOR CONSTRUCTION AND SECONDARY MEMBERS = 2 HOURSROOF CONSTRUCTION AND SECONDARY MEMBERS = 1 HOUR

(IBC 2015) TABLE 803.9, INTERIOR WALL AND CEILING FINISH REQUIREMENTS BY OCCUPANCY: (SPRINKLERED)- CORRIDORS ARE TO BE MIN. CLASS C FOR OCCUPANCY GROUP B.- ROOMS AND ENCLOSED SPACES ARE TO BE A MIN. CLASS C FOR OCCUPANCY GROUPS B

(IBC 2015) TABLE 1004.1.2, MAXIMUM FLOOR AREA ALLOWANCES PER OCCUPANT:OCCUPANCY TYPE B = 100 SF/PERSON

ACTUAL FLOOR AREA PER OCCUPANT:LEVEL 02 - ENTIRE FLOOR 18,228 SF / 100 = 183LEVEL 02 - AREA OF WORK

(IBC 2015) 1005.3 MIN. REQUIRED EGRESS:STAIR WIDTH = 0.3 INCHES PER OCCUPANT (MINIMUM 44 INCHES)OTHER EGRESS COMPONENTS = 0.2 INCHES PER OCCUPANT

(IBC 2015) TABLE 1006.2.1:A TYPE B OCCUPANCY EQUIPPED WITH AN AUTOMATIC SPRINKLER SYSTEM INSTALLED IN ACCORDANCE WITH SECTION 903.3.1.1 OR 903.3.1.2 SHALL HAVE A MAXIMUM COMMON PATH OF TRAVEL DISTANCE OF 100 FEET.

(IBC 2015) TABLE 1017.2 EXIT ACCESS TRAVEL DISTANCE:IN OCCUPANCY TYPE B EQUIPPED WITH AN AUTOMATIC SPRINKLER SYSTEM INSTALLED IN ACCORDANCE WITH SECTION 903.3.1.1 OR 903.3.1.2, SHALL HAVE A MAXIMUM EXIT ACCESS TRAVEL DISTANCE OF 300 FEET.

(IBC 2015) TABLE 1020.1 CORRIDOR RESISTANCE FIRE RATING:IN OCCUPANCY TYPE B EQUIPPED WITH AN SPRINKLER SYSTEM INSTALLED IN ACCORDANCE WITH SECTION 903.3.1.1 OR 903.3.1.2 AND SERVING GREATER AREA THAN 30 PEOPLE, CORRIDOR WALLS TO HAVE A MINIMUM FIRE RESITING OF 0 HOURS

(IBC 2015) 1020.4 DEAD ENDS:WHERE MORE THAN ONE EXIT OR EXIT ACCESS DOORWAY IS REQUIRED, AND WHERE EQUIPPED WITH AN AUTOMATIC SPRINKLER SYSTEM INSTALLED IN ACCORDANCE WITH SECTION 903.3.11 OR 903.3.1.2 EXITS SHALL BE ARRANGED SUCH THAT THERE ARE NO DEAD ENDS IN CORRIDORS MORE THAN 50 FEET IN LENGTH.

IBC 2015) TABLE 2902.1, MINIMUM SANITARY FIXTURES:INTERNATIONAL PLUMBING CODE 410.1 DRINKING FOUNTAIN APPROVAL - WHERE DRINKING FOUNTAINS ARE REQUIRED, WATER COOLERS OR BOTTLED WATER DISPENSER SHALL BE PERMITTED BY SUBSTITUTION.

OCCUPANCY TYPE B 1 WATER CLOSETS/URINAL PER 25 OCCUPANTS FOR THE FIRST 50 AND 1 ADDITIONAL PER 50 FOR REMAINDER1 LAVATORY PER 40 OCCUPANTS FOR FIRST 80 AND 1 ADDTIONAL PER 80 FOR REMAINDER1 DRINKING FOUNTAIN PER 100 OCCUPANTS1 SERVICE SINK

ACTUAL SANITARY FIXTURES PROVIDED - OCCUPANCY TYPE BLEVEL 02 - 183 OCCUPANTS (92 MALE / 92 FEMALE)WATER CLOSETS - 5 MALE AND 5 FEMALE LAVATORIES - 3 MALE AND 3 FEMALEDRINKING FOUNTAIN - 1 REQUIREDSERVICE SINK - 1 REQUIRED

A B C D E F G H I J K

.01

1

1a

2

3

0.9

112 SF

MEN204

175 SF

WOMEN205

1603 SF

SPACE B229

1711 SF

SPACE 1-C230

72 SF

SPACE 3-C232

75 SF

SPACE 2-C231

9786 SF

SPACE A228

104 SF

CORRIDOR203218 SF

CORRIDOR223

131 SF

WOMEN222

177 SF

MEN221

216 SF

STAIR 1S-1

57 SF

ELEVATOR 1E-1

82 SF

UTILITY223A

148 SF

STAIR 2S-2

57 SF

ELEVATOR 2E-2

STAIR 3S-3

OPEN TO 1ST FLOOR LOBBYAREA NOT IN SCOPE

AREA NOT IS SCOPEAREA NOT IS SCOPE

FE

FEFE

75' - 0"

75' -

0"

75' - 0"

COMMON PATH OF TRAVEL = 59'-2"

36"

36"

36"

36"

WEST ST. PAUL AVENUE

EXISTING EXITS TO GRADE "NO CHANGE"

EXISTING RATED WALLS "NO CHANGE"





NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

2ND LEVEL KEY PLAN

AREA OF WORKALT BID

PROJECT TITLE



PROJECT 2019

LIFE SAFETYPLANS

02/22/2019

218089.00

A010

Author Approver

Scale:

0' 2" 4" 6"1"

1" = 10'-0"1 NEW WORK PLAN - LEVEL 02 - LIFE SAFETY PLAN - ALTERNATE BIDBASE BID - NO WORK LEVEL 2

A010

larjt

Text Box


UP


.01

1

1a

2

3

0.9

AREA NOT IS SCOPE AREA NOT IS SCOPE


FUTURE TENNANT SPACE A

FUTURE TENNANT SPACE C

FUTURE TENNANT SPACE B

1

2

1

1

3

3

3

1

4

5

8"

EDGE OF NEW OPENING

6

12' -

4"

2

2

DEMOLITION PLAN LEGEND

EXISTING, TO BE REMOVED

EXISTING, TO REMAIN

AREA NOT IN SCOPE OF WORK

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

2ND LEVEL KEY PLAN

AREA OF WORKALT BID

PROJECT TITLE



PROJECT 2019

DEMOLITIONPLAN - LEVEL 02

02/22/2019

218089.00

A102

Author Approver

Scale:

0' 1' 2' 3'6"

1/8" = 1'-0"1 DEMOLITION PLAN - LEVEL 02

GENERAL DEMOLITION NOTES TO CONTRACTOR

1. DRAWINGS WERE PREPARED BASED ON AVAILABLE EXISTING BUILDING DOCUMENTATION. PRIOR TO CONSTRUCTION,CONTRACTOR SHALL FIELD VERIFY EXISTING CONDITIONS, AND DIMENSIONS TO SATISFY EXECUTION OF WORK. ANYDISCREPANCIES SHALL BE REPORTED TO THE ARCHITECT IMMEDIATELY.

2. EXISTING WALLS, DOORS, FRAMES, ETC. THAT ARE SCHEDULED TO BE REMOVED ARE SHOWN BY HEAVY DASHED LINETYPES. SEE DEMOLITION KEY NOTES FOR SPECIFIC INSTRUCTIONS.

3. EXISTING WALLS, DOORS, FRAMES, ETC. THAT ARE SCHEDULED TO REMAIN ARE SHOWN HALF-TONE AND ARE TO BEPROTECTED FROM DAMAGE DURING DEMOLITION AND CONSTRUCTION. ANY SUCH EXISTING CONDITIONS WHICH AREDAMAGED OR BECOME UNSTABLE DUE TO OTHER DEMOLITION SHALL BE REPLACED AT NO COST TO THE OWNER,WITH NEW CONSTRUCTION TO MATCH.

4. REMOVAL OF ALL HAZARDOUS MATERIALS IS THE SOLE RESPONSIBILITY OF THE OWNER. THE EXISTING BUILDING ISASSUMED TO NOT CONTAIN SUCH MATERIALS. SHOULD ANY MATERIAL BE FOUND, OR IS SUSPECTED TO CONTAINHAZARDOUS MATERIAL, THE CONTRACTOR SHOULD STOP WORK IMMEDIATELY AND NOTIFY OWNER AND ARCHITECT.

5. SEE MEPFP DRAWINGS AND SPECIFICATIONS FOR ELECTRICAL, PLUMBING, FIRE PROTECTION AND HVAC REMOVAL.THESE SYSTEMS ARE SHOWN FOR COORDINATION PURPOSES ONLY.

6. COORDINATE ALL ITEMS TO BE SALVAGED AND TURN OVER TO OWNER.

SEE PROJECT GENERAL CONDITIONS, GENERAL INFORMATION ON SHEET A001 AND SELECTIVE DEMOLITION, CUTTING AND PATCHINGSPECIFICATIONS THAT ARE USED IN ASSOCIATION WITH THESE NOTES.

DEMOLITION PLAN KEY NOTES APPLY TO ALL NEW WORK DRAWINGS AND MAY NOT BE USED ON EVERY SHEET.

DEMOLITION PLAN KEY NOTES

1 REMOVE EXISTING MASONRY WING WALL2 REMOVE EXISTING DOOR AND FRAME3 REMOVE EXISTING FLOOR FINISHES THROUGHOUT AREA OF WORK4 REMOVE EXISTING FLOOR AND WALL FINISHES THROUGHOUT AREA OF WORK - PREP TO RECIEVE NEW5 CUT AND PATCH NEW OPENING IN KIND WITH EXISTING MASONRY WALL FOR NEW DOOR AND FRAME - REFER TO NEW FLOOR

PLAN AND DOOR SCHEDULE6 REMOVE SECTION OF EXISTING MASONRY PARTITION (TO DECK) AS INDICATED, PATCH AND PREP CONCRETE FLOOR AS

NEEDED AT AREA OF REMOVAL TO RECIVE NEW FINISHES

ALTERNATE BID BASE BID - NO WORK LEVEL 2

A102

larjt

Text Box


UP


.01

1

1a

2

3

0.9

1603 SF

SPACE B229

1711 SF

SPACE 1-C230

72 SF

SPACE 3-C232

75 SF

SPACE 2-C231

9786 SF

SPACE A228

104 SF

CORRIDOR203

218 SF

CORRIDOR223

131 SF

WOMEN222

177 SF

MEN221

216 SF

STAIR 1S-1

57 SF

ELEVATOR 1E-1

82 SF

UTILITY223A

148 SF

STAIR 2S-2

57 SF

ELEVATOR 2E-2

STAIR 3S-3


A2022

AREA NOT IS SCOPE

AREA NOT IS SCOPE112 SF

MEN204

175 SF

WOMEN205

1

1

1

NEW WORK PLAN LEGEND

EXISTING, TO REMAIN

MASONRY PARTITION, SEE PARTITION TYPES FOR DETAILS

STUD PARTITION, SEE PARTITION TYPES FOR DETAILS

AREA NOT IN SCOPE OF WORK

112 SF

MEN204

175 SF

WOMEN205

104 SF

CORRIDOR203

A700 8

7

6

5

A700

3

4

1

2

205

F60

F3T

F3T

F6T

F3T

F3A

A3A

A30

8"

2' - 0"

8" 2' - 0"

6' - 2 3/4"

11' -

0 3

/8"

11' -

4 1

/2"

1' - 6"

1' - 10"

HEATER

HEATER

5' MIN

5' -

0"

2' - 0"

1' - 6"

5' MINEQ EQ

4' - 0"

1' - 6"

204B

204A

M8-

2

2

2

3' -

7" 2

3

3

3

4

4

5' -

6"

5' - 0"

1

1

175 SF

WOMEN205

112 SF

MEN204

104 SF

CORRIDOR203

ACT-28' - 0"

ACT-28' - 0"

ACT-18' - 0"

1

2

2

2

AP

EXIT SIGN

SUPPLY MECH DIFFUSER SEE MECHANICAL DRAWINGS

MECH RETURN DIFFUSERSEE MECHANICAL DRAWINGS

MECH EXHAUST SEE MECHANICAL DRAWINGS

ACCESS PANEL

REFLECTED CEILING PLAN KEY

ROUND RECESSED DOWNLIGHT FIXTURESEE ELECTRICAL DRAWINGS

LINEAR PENDANT LIGHT SEE ELECTRICAL DRAWINGS

2X4 LIGHT FIXTURESEE ELECTRICAL DRAWINGS

GYPSUM WALL BOARD CEILINGSEE ROOM FINISH SCHEDULE AND SPECIFICATIONS FOR MORE INFORMATION

2X2 ACOUSTICAL CEILING TILESEE ROOM FINISH SCHEDULE AND SPECIFICATIONS FOR MORE INFORMATION

EXPOSED CEILINGSEE ROOM FINISH SCHEDULE

NOT ALL SYMBOLS MAY BE USED.

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

2ND LEVEL KEY PLAN

AREA OF WORKALT BID

PROJECT TITLE



PROJECT 2019

NEW WORKPLAN - LEVEL 02

02/22/2019

218089.00

A202

Author Approver

Scale:

0' 4' 8' 12'2'

1/8" = 1'-0"1 NEW WORK PLAN - LEVEL 02

GENERAL FLOOR PLAN NOTES TO CONTRACTOR

1. THIS DRAWING IS FURTHER SUPPORTED BY INFORMATION CONTAINED IN THE SPECIFICATION MANUAL.2. THE CIVIL, STRUCTURAL, MECHANICAL, ELECTRICAL, PLUMBING, FIRE PROTECTION, AUDIO-VISUAL, AND SECURITY

DRAWINGS ARE SUPPLEMENTARY TO THE ARCHITECTURAL DRAWINGS. IT SHALL BE THE RESPONSIBILITY OF THECONTRACTOR TO COORDINATE THE INFORMATION CONTAINED IN ALL THE DRAWINGS BEFORE THE INSTALLATION OF ALLWORK.

3. DO NOT SCALE DRAWINGS. CONTRACTOR TO VERIFY ALL CONDITIONS AND DIMENSIONS AT THE JOB SITE PRIOR TOCOMMENCING CONSTRUCTION.

4. FLOOR ELEVATIONS ARE TO THE TOP OF THE SUB-FLOOR MATERIAL UNLESS OTHERWISE NOTED.5. CONTRACTORS SHALL JOINTLY PROVIDE AND INSTALL ALL STIFFENERS, BRACING, BACKING PLATES, WALL BLOCKING AND

SUPPORTING BRACKETS REQUIRED FOR THE INSTALLATION OF CASEWORK, TOILET ACCESSORIES, PARTITIONS.MILLWORK, AND ALL WORK MOUNTED OR SUSPENDED BY ALL TRADES.

6 REFER TO INTERIOR ELEVATIONS (SHEET A700) FOR ALL WALL MOUNTED EQUIPMENT MOUNTING HEIGHTS ANDEQUIPMENT TAGS

7 REFER TO PLUMBING DRAWINGS AND SPECS FOR P-FIXTURE TYPES


NEW WORK PLAN KEY NOTES APPLY TO ALL NEW WORK DRAWINGS AND MAY NOT BE USED ON EVERY SHEET.

NEW WORK PLAN KEY NOTES

1 PATCH AREAS OF REMOVED FINISHES WITH SIMILAR CONSTRUCTION2 TYP. FURNISH AND INSTALL (F&I) NEW PARTITIONS AS INDICATED - REFER TO PARTITION TYPES3 F&I NEW DOOR, FRAME AND HARDWARE - REFER TO DOOR SCHEDULE4 F&I NEW FLOOR FINISHES, WALL FINISHES AND WALL BASE - REFER TO ROOM FINISH SCHEDULE

Scale:

0' 2' 4' 6'1'

1/4" = 1'-0"2 ENLARGED PLAN - EAST RESTROOMSScale:

0' 2' 4' 6'1'

1/4" = 1'-0"3 ENLARGED PLAN - EAST RESTROOMS

GENERAL REFLECTED CEILING PLAN NOTES TO CONTRACTOR

1. THIS PLAN SHALL BE USED TO ESTABLISH THE LOCATIONS OF THE MAJOR CEILING PENETRATIONS INCLUDING: LIGHTING,HVAC, ACCESS PANEL, SPRINKLERS, SPEAKERS, ETC. SEE MEPFP DRAWINGS FOR MORE SPECIFIC INFORMATIONREGARDING EACH DISCIPLINE. IF CONFLICTS ARE DISCOVERED REGARDING LOCATION OF CEILING PENETRATIONS,CONTACT ARCHITECT FOR FURTHER INFORMATION.

2. ALL DEVICES SHOWN IN CEILING TILE SHALL BE LOCATED IN THE CENTER OF THAT TILE UNLESS OTHERWISE NOTED.3. ALL DIMENSIONS TO CEILING FIXTURES ARE TO CENTER OF FIXTURE UNLESS NOTED OTHERWISE.


REFLECTED CEILING PLAN KEY NOTES APPLY TO ALL NEW WORK DRAWINGS AND MAY NOT BE USED ON EVERY SHEET.

REFLECTED CEILING PLAN KEY NOTES

1 F&I NEW CEILING TILE AND GRID - REFER TO ROOM FINISH SCHEDULE2 REFER TO ELECTRICAL DRAWINGS FOR LIGHTING FIXTURE TYPES AND LOCATIONS

A010

A202


larjt

Text Box


SEE

CEI

LIN

G P

LAN

GB-2

SEE PLAN SEE PLAN

MAX

1' -

5"6"

HEATER (BY OTHERS)

34" M

AX

40" M

AX

*TO BOTTOM OFREFLECTIVE SURFACE

HEATER (BY OTHERS)

SEE

CEI

LIN

G P

LAN

PTD-2

MR-1

SD-1

UG-1

6"

1' - 1 7/8"

3' - 7 1/8"

SEE PLAN

6"

SEE

CEI

LIN

G P

LAN

GB-1

GB-3

TPD-1

6"

HEATER (BY OTHERS)

34" M

AX

40" M

AX

*TO BOTTOM OF MR-1REFLECTIVE SURFACE

SEE

CEI

LIN

G P

LAN

PTD-2

MR-1

SD-1

UG-1

4' - 2 1/2"

7 1/8"

SEE PLAN

6"

SEE

CEI

LIN

G P

LAN

SND-1

TPD-1

1' - 11 1/4"

6"

SEE

CEI

LIN

G P

LAN

GB-2

SEE PLAN

SEE PLAN

6"

SEE

CEI

LIN

G P

LAN

GB-1

GB-3

TPD-1

SND-1

1' - 11 1/4"

TO O

UTL

ET

WH

EN O

PEN

ED

T.O

. SEA

T

TO R

IM

(17'-19") AMBULATORYACCESSIBLE WATER CLOSET

STANDARDWATER CLOSET

ACCESSIBLE WHEELCHAIRWATER CLOSET

WATER CLOSET -SIDE ELEVATION

STANDARD URINAL

ADA URINAL

SANITARY NAPKIN

DISPOSAL

DIAPER CHANGING STATION

PAPER TOWEL DISPENSER /

WASTE RECEPTACLE

LAVATORY, SOAP DISPENSER, AND MIRROR

FIRE EXTINGUISHER

CABINET

ROOMSIGNAGE

FLUSH VALVE

GENERAL NOTES:

FLUSH VALVE

1. LIGHT SWITCHES, ELECTRICAL OUTLETS, AND OTHER ENVIRONMENTAL CONTROLS SHALL BE MOUNTED NO HIGHER THAN 4'-0" U.N.O. & NO LOWER THAN1'-3" ABOVE FINISHED FLOOR. IF THE CONTROL IS MOUNTED ABOVE A COUNTER OR OTHER OBSTRUCTION, WHICH IS BETWEEN 20"-25" IN DEPTH, THENTHE MAXIMUM MOUNTING HEIGHT SHALL BE LOWERED TO 3'-8" AFF. LIGHT SWITCHES AND THERMOSTATS IN THE SAME LOCATION ARE TO ALIGNHORIZONTALLY. IF SWITCHES ARE UNABLE TO BE ALIGNED, THE CONTRACTOR IS TO NOTIFY THE ARCHITECT BEFORE PROCEEDING WITH WORK. SEEGENERAL ADA REACH RANGES DIAGRAM FOR MORE INFORMATION.

2. PROVIDE SOLID WOOD BLOCKING OR METAL STRAPPING IN WALLS FOR INSTALLATION OF ACCESSORIES.

3. NOT ALL ACCESSORIES SHOWN ON THIS DRAWING ARE PROVIDED IN THE PROJECT.

SOURCE: ANSI A117.1 - 2003

MAX

IMU

M

4' -

0"

MIN

IMU

M

4' -

6"

9"

ROOM SIGN

LATCH SIDE OF DOOR

TOW

EL S

LOT

3' -

4" T

OOPE

NIN

G1'

- 7"

TO

TABL

E TO

P

2' -

10" T

O

TO P

UM

P

3' -

4"

11"

40" M

AX.

TO R

IM O

F SI

NK

2' -

10" M

AX.

4"

2' -

6" M

IN.

3' -

8"M

AX.

1' -

5"

3' - 0"

2' -

0"

1' -

0"3'

- 6"

PAR

TITI

ON

MIN

.

1' -

3" 33" T

O 3

6"

39" T

O 4

1"18

" MIN

.

39" TO 41"

12" MAX. 42" MIN.

9" MAX.7" MIN.

1 1/

2" M

IN.

33" T

O 3

6"

16" TO 18"

3' - 0" 6"

19" M

AX.

17" M

IN.

1' -

0"4'

- 10

" PAR

TITI

ON

1' - 6"

T.O

. BO

WL

1' -

3"

SND-1

PTD-2

DCS-1

SD-1

TPD-1

GB-3

GB-1

GB-2

MR-1

UG-1 UG-1

SD-1



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

INTERIORELEVATIONS

02/22/2019

218089.00

A700

Author Approver

Scale:

0' 2' 4' 6'1'

3/8" = 1'-0"1 MEN'S RESTROOM - SOUTHScale:

0' 2' 4' 6'1'

3/8" = 1'-0"2 MEN'S RESTROOM - WESTScale:

0' 2' 4' 6'1'

3/8" = 1'-0"3 MEN'S RESTROOM - NORTHScale:

0' 2' 4' 6'1'

3/8" = 1'-0"4 MEN'S RESTROOM - EAST

Scale:

0' 2' 4' 6'1'

3/8" = 1'-0"5 WOMEN'S RESTROOM - SOUTHScale:

0' 2' 4' 6'1'

3/8" = 1'-0"6 WOMEN'S RESTROOM - WESTScale:

0' 2' 4' 6'1'

3/8" = 1'-0"7 WOMEN'S RESTROOM - NORTHScale:

0' 2' 4' 6'1'

3/8" = 1'-0"8 WOMEN'S RESTROOM - EAST

Scale:

0' 1.3' 2.7' 4'0.7'

3/8" = 1'-0"9 MOUNTING HEIGHT STANDARDS - FOR REFERENCE ONLY


larjt

Text Box


ROOM FINISH SCHEDULE ABBREVIATIONS

ACT ACOUSTICAL CEILING TILEAPC ARCHITECTURAL PRECAST CONCRETEAWP ACOUSTICAL WALL PANELCC COLUMN COVERCMU CONCRETE MASONRY UNITCONC CONCRETECPT CARPETCT CERAMIC TILECTB CERAMIC TILE BASE

IAW INTERIOR ARCHITECTURAL WOODWORKIWP IMPACT WALL PROTECTIONLMC LINEAR METAL CEILINGLWC LINEAR WOOD CEILINGMPC METAL PAN CEILINGPLAM PLASTIC LAMINATEPLAS PLASTERPT PAINTRT RUBBER FLOOR TILE

RV REVEALRVS RIGID VINYL SHEETSC SEALED CONCRETESDT STATIC DISSIPATIVE TILESTA STAINST STONE TILE FLOORINGSTB STONE TILE BASESV SHEET VINYLSVT SOLID VINYL FLOOR TILE

TER TERRAZZOTP TOILET PARTITIONVB VINYL BASEVCT VINYL COMPOSITION TILEVP VINYL PLANKWC WALL COVERINGWD WOOD WD FL WOOD FLOORINGWT WINDOW TREATMENTWD VNR WOOD VENEER

ERF EPOXY RESINOUS FLOORINGERF-CB EPOXY RESINOUS FLOORING -

INTEGRAL COVE BASEEXP EXPOSEDEXTG EXISTINGFAB FABRICFL MAT FLOOR MATG GROUTGROM GROMMETGWB GYPSUM WALL BOARD

DOOR SCHEDULE ABBREVIATIONS

ALUM ALUMINUMGL GLASS

HM HOLLOW METAL SSV STAIN, SEAL AND VARNISH

PREFIN PRE-FINISHEDPT PAINT

SST STAINLESS STEELWD WOOD DOOR

SPOT GROUT @JAMB ANCHORS

JAMB ANCHOR(3) PER DOOR

H.M. DOOR FRAME(SEE DOOR SCHED.)

GWB PARTITION(SEE PLAN FOR PARTITION TYPE)

A GWB PARTITIONS


JAMB ANCHOR(3 PER DOOR)

GWB LAYER (SEE PLAN FOR PARTITION TYPE)


CMU PARTITION (SEE PLAN FOR PARTITION TYPE)

SEALANT & BACKER ROD(BOTH SIDES)

B GWB/CMU PARTITIONS

6" 1"

NOTE:DETAIL SIMILAR AT CONDITIONS WITH FURRING ON BOTH SIDES.

NOTE:PROVIDE WRAP AROUND FRAMES AT ALL GWB PARTITIONS

CERAMIC TILE SEE ROOM FINISH SCHEDULE FOR LOCATIONS.

PROVIDE METAL EDGE STRIP WHERE CERAMIC TILE ABUTS DOOR FRAMES, TYP.


GWB LAYER (SEE PLAN FOR PARTITION TYPE)

CMU BOND BEAM

SEALANT & BACKER ROD(BOTH SIDES)

B GWB/CMU PARTITIONS

6"

NOTE:DETAIL SIMILAR AT CONDITIONS WITH FURRING ON BOTH SIDES.


JAMB ANCHOR(3) PER DOOR


GWB PARTITION(SEE PLAN FOR PARTITION TYPE)

A GWB PARTITIONS

NOTE:PROVIDE WRAP AROUND FRAMES AT ALL GWB PARTITIONS

CERAMIC TILE SEE ROOM FINISH SCHEDULE FOR LOCATIONS.

PROVIDE METAL EDGE STRIP WHERE CERAMIC TILE ABUTS DOOR FRAMES, TYP.

LINTEL SCHEDULE FOR MASONRY DOOR ROUGH OPENINGS UP TO6'-4" (MAX.); 8" BOND BEAM W/ (2) #5's (MIN.) SEE STRUCTURAL. BOND BEAM IS 16"GREATER THAN SCHEDULED MASONRY R.O. (TYP.). GROUT EA. 8" JAMBCELL SOLID W/ (2) #5's AS REQ'D FOR LINTEL BEARING

HOLLOW METALDOOR FRAME

A

GWB PARTITION

2"

2" VARY 2"

3/8"

1/2"

TYPE

VARIESSEE PARTITION 1/2"

SINGLE LEAF DOOR FLUSH

F

SEESCHED.

SEE

SCH

ED.

1

SEE

SCH

ED.

2"

2"SEE

SCHED. 2"

A



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

ROOMFINISH/DOORSCHEDULE

02/22/2019

218089.00

A900

Author Approver

ROOM FINISH SCHEDULE

ROOM # ROOM NAME FLOOR BASEWALL

CEILING NOTESNORTH SOUTH WEST EASTENLARGED PLAN - EAST RESTROOMS203 CORRIDOR - - - - - ACT-1 1204 MEN CT-1 CTB-1 PT-1 PT-1/CT-2 PT-1 PT-1 ACT-2 1205 WOMEN CT-1 CTB-1 PT-1/CT-2 PT-1 PT-1 PT-1 ACT-2 1228 SPACE A - - - - - - - 1229 SPACE B - - - - - - - 1230 SPACE 1-C - - - - - - - 1231 SPACE 2-C - - - - - - - 1232 SPACE 3-C - - - - - - - 1

ROOM FINISH SCHEDULE NOTES

1. PATCH EXISTING FINISHES AFFECTED BY DEMOLITION

FINISHES SCHEDULE

MARK MANUFACTURER PRODUCT STYLE SIZE COMMENTSACT-1 ACOUSTICAL CEILING TILE 2' X 2'ACT-2 ACOUSTICAL GYPSUM CEILING TILE 2' X 2'CT-1 CROSSVILLE CERAMIC FLOOR TILE 12" X 12"CT-2 CROSSVILLE CERAMIC WALL TILE 12" X 24"

CTB-1 CROSSVILLE CERAMIC TILE BASE 6" X 12"PT-1 WALL PAINT

DOOR AND FRAME SCHEDULE

DOORNO. ROOM NAME

DOORS DOORS FRAMES DETAILSFIRE

RATINGHARDWARE

GROUP NOTESLEAF

QUANTITY WIDTH WIDTH HEIGHT TYPE MATERIAL FINISH GLASS TYPE MATERIAL FINISH HEAD JAMB204A MEN (1) 3' - 0" 3' - 0" 7' - 0" F WD SSV NA 1 HM PT-1 2B 1B 0 90 1,2204B CHASE (1) 2' - 0" 2' - 0" 7' - 0" F WD SSV NA 1 HM PT-1 2A 1A 0 14 1205 WOMEN (1) 3' - 0" 3' - 0" 7' - 0" F WD SSV NA 1 HM PT-1 2A 1A 0 90 1,2

DOOR AND FRAME SCHEDULE NOTES

1. REFER TO SPECIFICATIONS FOR HARDWARE GROUP INFORMATION (SEE SPECIFICATION SECTION 08 71 00 - DOOR HARDWARE)2 WOOD (WD) DOOR SPECIES AND FINISH TO MATCH EXISTING 2ND FLOOR EAST RESTROOMS

Scale:

0' 2" 4" 6"1"

3" = 1'-0"1 DOOR JAMB DETAILS

Scale:

0' 2" 4" 6"1"

3" = 1'-0"2 DOOR HEAD DETAIL

Scale:

0' 2" 4" 6"1"

3" = 1'-0"

DOOR FRAME PROFILESScale:

0' 2" 4" 6"1"

1/4" = 1'-0"

DOOR TYPESScale:

0' 2" 4" 6"1"

1/4" = 1'-0"

FRAME TYPES


larjt

Text Box


17400 West Capitol Drive

Brookfield, WI 53045

Phone: 414.778.1700

Fax: 414.778.2360



PROJECT TITLE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PR

ELIM

INA

RY - N

OT F

OR C

ON

ST

RU

CTIO

N- 90

% O

WN

ER R

EVIE

W S

ET

S200

AYA AYA

NORTH

KEY PLAN

PLANFRAMING

EQUIPMENT

PROJECT 2018REHABILITION

STATIONINTERMODALMILWAUKEE

/11/019

218089.00

1 1/2 "

6"

2 1/2 "

3"

2 1/2 "

1 1/2 "1/2" MAX

8'-1" 8'-0"

12'-11"

7'-0"

1'-7" 6'-10"

10"

10'-0"

10'-0"

1'-7"

X:\66330\cad\6

6330shS200.d

gn

ORIGIN

AL SIZ

E = 3

0" x 4

2"

PL

OT

TE

D B

Y:

SC

ALE:

brianc

1/4"=

1'-0"

W8x13

W8x13

W8x13

W8x13

COLUMN

HSS4x4x1/4

COLUMN

HSS4x4x1/4

COLUMN

HSS4x4x1/4

COLUMN

HSS4x4x1/4

COLUMN

HSS4x4x1/4

COLUMN

HSS4x4x1/4

AT 18" O.C. EACH WAY

6" CONCRETE PAD WITH #6 BARS

EXISTING BEAM W18x55



EXIS

TIN

G B

EA

M 3

0W

F116

EXIS

TIN

G B

EA

M 3

0W

F116

EXIS

TIN

G B

EA

M 3

0W

F116

EXIS

TIN

G B

EA

M 3

0W

F116


EXIS

TIN

G B

EA

M 3

0W

F116










SCALE: 1 1/2"=1'-0"

3/4" CHAMFER

#6 BARS AT 18" O.C. EACH WAY

BEFORE POURING BASE

AND SCRUB WITH FRESH GROUT

SCARIFY TOP OF FLOOR SLAB

BY SIMPSON STRONG TIE

ACRYLIC ANCHORING ADHESIVE

#4 BARS AT 12" O.C.SET IN

SCALE: 1"=1'-0"

BEAM PER PLAN

COLUMN PER PLAN

3/16"

3/16"

BY SIMPSON STRONG TIE

ACRYLIC ANCHORING ADHESIVE

(4) ANCHOR BOLTS A325 SET IN

FOR BOLT HOLES

WITH MINIMUM 1.1/4" EDGE DISTANCE

BASE PLATE 12"x12"x3/4"

SCALE: 1"=1'-0"

3/16"

BEAM PER FRAMING PLAN

BEAM PER FRAMING PLAN

13/16"X15/16" SLOTS IN PLATE

13/16" DIA. HOLES IN BEAM

(2) 3/4" A325 BOLTS WITH

5/16" STEEL PLATE

ACTUAL CHILLER PROVIDED

VERIFY FRAMING DIMENSIONS WITH

OF A

CT

UA

L C

HIL

LE

R P

RO

VID

ED

RE

GA

RD

LE

SS

DIM

EN

SIO

N M

US

T B

E M

AIN

TAIN

ED

OF A

CT

UA

L C

HIL

LE

R P

RO

VID

ED

RE

GA

RD

LE

SS

DIM

EN

SIO

N M

US

T B

E M

AIN

TAIN

ED

ED F G H

2

3

1a

SCALE: 1/4"=1'-0" 0 4'2' 8'

05

S200

10

S200

15

S200

EQUIPMENT PADAND COLUMN ANCHORING

BEAM CONNECTION

TYPICAL FRAME BEAM CONNECTION

NO

RT

H

05

S200

10

S200

15

S200

ROOF FRAMING PLAN


02/22/2019

BACKFLOW PREVENTERREDUCED PRESSURE

CLOSET/LAVATORYCOMBINATION WATER

RELIEF VALVETEMPERATURE & PRESSURE

LAB AIR

LAB VACUUM

WATER SOFTENER

WASTE

SEWAGE EJECTOR

PLUMBING CONTRACTOR

WATER HEATER

WATER HAMMER ARRESTER

WATER MAIN

WALL CLEAN OUT

VENT

VALVE

WATER CLOSET

VENT THRU ROOF

URINAL

UNEXCAVATED

TEMPERED WATER

TRENCH DRAIN

TEST CONNECTION

SOLENOID VALVE

SERVICE SINK

STORAGE TANK

SUMP PUMP

SHOWER

ROOF DRAIN

SINK

SANITARY

PURE WATER

PUMP DISCHARGE

PRESSURE GAUGE

PRESSURE REDUCING VALVE

FLOOR CLEAN OUT

EXPANSION TANK

FINISHED FLOOR ELEVATION

ELECTRIC WATER COOLER

INVERT ELEVATION

HOT WATER RETURN

GARAGE CATCH BASIN

HWR

IE

HW HOT WATER

GCB

GW

HB

GT

HYD

G

FS

FFEL

FH

FD

FCO

EXIST.

EWC

ET

GREASE TRAP

FIRE HYDRANT

FLOOR SINK

GREASE WASTE

HOSE BIBB

GAS

EXISTING

FUME HOOD

FLOOR DRAIN

LV

WS

WHA

WH

WM

WCO

LA

DRAIN TILE RECEIVER

DRAIN TILE CLEANOUT

COLD SOFT WATER

CLINICAL SERVICE SINK

CLEAN OUT TO GRADE

CLEAR WATER WASTE

EMERGENCY SHOWER-EYE WASH

EMERGENCY EYE WASH

DRINKING FOUNTAIN

CAPPED CONNECTION

CLEAR WATER VENT

BALANCING VALVE

CIRCULATING PUMP

CLEAR WATER VENT THRU ROOF

EMERGENCY SHOWER

CS CUP SINK

DT

EL

ESEW

ES

DTCO

EEW

DTR

DR

DN

DF

CSW

CSS

CW

DRAIN TILE

ELEVATION

DRAIN

DOWN

COLD WATER

CLVTR

COND

CONN

CP

COTG

CLW

CO

CC

CLV

CKVA

CB

BVA

BT

CLEAN OUT

CONNECTION

CONDUCTOR

BATH TUB

CATCH BASIN

CHECK VALVE

ST

UNEXC

WC/L

VTR

WC

W

VA

V

T&P VA

SVA

U/URI

TW

TD

TC

SAN

SS

SH

SP

SE

S/SK

RPBFP

PW

PRVA

RD

PD

PG

PC

SITE DRAIN

OVERFLOW

NON-POTABLE

LAUNDRY TRAY

MOP BASIN

MANHOLE

LAB SINK

LAVATORY

ABOVE FINISHED GRADE

ABOVE FINISHED FLOOR

(ALL ABBREVIATIONS SHOWN MAY NOT APPEAR ON DRAWINGS)

ACID/CHEMICAL DILUTION BASIN

ACID/CHEMICAL VENT THRU ROOF

ACID/CHEMICAL VENT

ACID/CHEMICAL WASTE

AUTOMATIC WASHER CONNECTION

BACKFLOW PREVENTER

AW

ADB

AWC

BFP

AVTR

AV

AFG

AFF

MB

MH

SD

OF

NP

LT

LS

L/LAV

ROUGH-IN ONLYRIO

CHW COLD HARD WATER

EC ELECTRICAL CONTRACTOR

MECHANICAL CONTRACTORMC

WET VENTWV

TRAP PRIMERTP

NORMALLY CLOSEDNC

COMPRESSED AIRCA

RO REVERSE OSMOSIS

DEIONIZED WATERDI

ABBREVIATIONS:

GLYCOLGLY

HOT WATER TEMPERATURE MAINTENANCE

FREEZE PROTECTION HEAT TRACE SYSTEM

WATER MAIN/SERVICE VALVEBOX

M

MANHOLE OR CATCH BASIN

PRESSURE REDUCING VALVE

PRESSURE BACKFLOW PREVENTERBACKFLOW PREVENTER OR REDUCED

SHUT-OFF VALVE

SOLENOID VALVE

FIRE HYDRANT

METER

HEAT TRACE SYSTEM

PUMP DISCHARGE PIPING

GREASE WASTE PIPING

ACID/CHEMICAL WASTE PIPING

ACID/CHEMICAL VENT PIPING

STORM WATER CONDUCTOR PIPING

CLEARWATER VENT PIPING

CLEARWATER WASTE PIPING

SANITARY VENT PIPING

GAS PIPING

OVERFLOW PIPING

SANITARY WASTE PIPING

STORM WATER PIPING IN GROUND

SANITARY VENT PIPING IN GROUND

SANITARY WASTE IN GROUND

WATER SERVICE LATERAL

DRAINTILE

WATER MAIN

LABORATORY VACUUM PIPING

FOOD SERVICE EQUIPMENT TAG

CONNECTION BY PLUMBING CONTRACTOR.

EXISTING PIPING TO BE REMOVED

EQUIPMENT BY OTHERS. PLUMBING

CONNECT TO EXISTING PIPING

EXISTING TO BE REMOVED

FINISHED FLOOR ELEVATION

FIXTURE UNIT (WATER SUPPLY OR WASTE)

EXISTING PIPING

LABORATORY AIR PIPING

COMPRESSED AIR PIPING

FLOOR SINK

TRENCH DRAIN

HOSE BIBB

OVERFLOW ROOF DRAIN

PRESSURE GAUGE

FLOOR DRAIN

ROOF DRAIN

SITE DRAIN

CLEAN OUT

FLOOR CLEAN OUT

(ALL SYMBOLS SHOWN MAY NOT APPEAR ON DRAWINGS)

PURE WATER PIPING

SOFT WATER PIPING

TEMPERED WATER PIPING

NON-POTABLE WATER PIPING

HOT WATER RETURN PIPING

COLD WATER PIPING

HOT WATER PIPING

WATER HAMMER ARRESTER

TEST CONNECTION

BALANCING VALVE

UNION

CAPPED CONNECTION

THERMOMETER

CHECK VALVE

HARD WATER PIPING

REVERSE OSMOSIS RETURN PIPING

REVERSE OSMOSIS SUPPLY PIPING

DEIONIZED WATER

DEIONIZED SUPPLY PIPING

DEIONIZED RETURN PIPING

HOT WATER TEMPERATURE MAINTENANCESH1 CIRCUIT NUMBER/START POINT DESIGNATION

HOT WATER TEMPERATURE MAINTENANCEEH1 CIRCUIT NUMBER/END POINT DESIGNATION

SYMBOLS:

S

AV

PD

GW

G

AW

OF

CL

CL

DT

ST

SAN

WM

WS

CA

LA

LV

X

PW

S

TW

NP

CHW

ROR

RO

DI

DIR

DIS

EXISTING TO REMAINR

PLUMBING GENERAL NOTES:1. FIELD VERIFY EXISTING CONDITIONS PRIOR TO BEGINNING WORK.

2. REFER TO PROJECT MANUAL FOR SPECIFICATIONS AND OTHERCONTRACT REQUIREMENTS.

3. THE CONTRACTOR IS RESPONSIBLE FOR CONFIRMING AND

CORRELATING ALL QUANTITIES, SIZES, CAPACITIES, ACCESSORIES, SEQUENCES, MATERIALS, MEANS AND METHODS,

PERFORMANCE, FABRICATION PROCESSES, AND TECHNIQUES OF

CONSTRUCTION. THE CONTRACTOR SHALL COORDINATE ALL

WORK WITH THAT OF OTHER TRADES. THE CONTRACTOR IS SOLELY RESPONSIBLE FOR DESIGN/BUILD CHANGES, EQUIPMENT

SUBSTITUTIONS, AND VALUE ENGINEERING CHANGES

PERFORMED BY THE CONTRACTOR.

4. DO NOT SCALE DRAWINGS FOR DRAIN LOCATIONS NEAR OR

SERVING EQUIPMENT. OBTAIN EQUIPMENT PAD LOCATIONS AND

EQUIPMENT CONNECTION REQUIREMENTS FROM OTHER

CONTRACT DIVISIONS PRIOR TO LOCATING DRAINS.

5. SEAL ALL PIPING PENETRATIONS AIR TIGHT THRU WALLS,

FLOORS, OR PARTITIONS IDENTIFIED AS SOUND WALLS, SMOKE

TIGHT WALLS, FIRE BARRIERS, SMOKE BARRIERS, SHAFTS ORFIRE RATED CONSTRUCTION INDICATED ON THE ARCHITECTURAL

LIFE SAFETY DRAWINGS. MAINTAIN ALL DESIGNATED FIRE

RATINGS, SMOKE RATINGS AND UL LISTINGS.

6. REFER TO ARCHITECTURAL REFLECTED CEILING PLAN FOR FINAL

LOCATIONS OF CEILING MOUNTED EQUIPMENT.

7. COORDINATE ALL PIPE CONNECTIONS REQUIRED FOR OWNERFURNISHED EQUIPMENT. PROVIDE SHUTOFF VALVES, WATER

FILTERS, ETC. AS REQUIRED FOR COMPLETE INSTALLATION AND

RECOMMENDED BY EQUIPMENT MANUFACTURER. VERIFY EXACT

REQUIREMENTS WITH EQUIPMENT MANUFACTURER.

8. INSTALL ALL SHUTOFF VALVES, CONTROL VALVES, DRAIN

VALVES, AIR VENTS, AND ACCESSORIES IN ACCESSIBLE

LOCATIONS. DEVICES LOCATED ABOVE CEILINGS SHALL BEINSTALLED WITHIN 3 FEET ABOVE THE CEILING TO MAINTAIN

ACCESSIBILITY.

9. PROVIDE VALVE HANDLE EXTENSIONS FOR ALL VALVESSERVING INSULATED PIPING. ALL VALVE HANDLES MUST BE AT

LEAST 1” ABOVE THE TOP OF THE SURFACE OF THE INSULATION.

10. EXPOSED PIPING IN OCCUPIED ROOMS WITH SUSPENDEDCEILINGS IS PROHIBITED.

11. PRIOR TO MAKING ANY NEW PLUMBING FLOOR PENETRATIONS IN

EXISTING BUILDINGS, X-RAY THE EXISTING CONSTRUCTION TOAVOID INTERFERENCES WITH STEEL REINFORCEMENT.

COORDINATE WITH THE GENERAL CONTRACTOR.

12. AREAS OF THE BUILDING UTILIZING THE SPACE ABOVESUSPENDED CEILINGS AND MECHANICAL EQUIPMENT ROOMS AS

RETURN AIR PLENUMS SHALL COMPLY WITH NFPA 90A FOR

ALLOWABLE MATERIALS WITHIN PLENUMS.

13. DESIGN OF ALL PLUMBING EQUIPMENT SUPPORTS SHALL BE THE

RESPONSIBILITY OF THE PLUMBING CONTRACTOR.

14. POWDER-ACTUATED ANCHORS ARE PROHIBITED.

15. RING AND CLEVIS PIPE HANGERS SHALL BE OVERSIZED TO

ACCOMMODATE THE OUTSIDE DIAMETER OF THE PIPE

INSULATION.

16. ALL PIPE INSULATION ENDS SHALL BE SEALED AT THRU-WALL

AND IN-WALL STUD FRAMING PENETRATIONS.

17. ALL NON-INSULATED PIPING WITHIN WALLS SHALL HAVEGROMMETS INSTALLED AT PENETRATIONS THRU WALL FRAMING.

18. ALL LOW VOLTAGE WIRING SHALL BE INSTALLED WITHIN

LABELED CONDUIT AND COMPLY WITH ELECTRICALSPECIFICATION REQUIREMENTS.

19. PROVIDED MINIMUM 3 FEET OF CLEARANCE FOR ALL FLOOR

MOUNTED PLUMBING EQUIPMENT REQUIRING REGULARMAINTENANCE.

PLUMBING DEMOLITION NOTES:1. INFORMATION PERTAINING TO EXISTING PROJECT CONDITIONS,

SUCH AS PRESENT LOCATIONS OF ARCHITECTURAL AND

STRUCTURAL BUILDING COMPONENTS, MECHANICAL AND ELECTRICAL EQUIPMENT, PIPING, DUCTWORK, ROUGH-INS AND

OTHER MISCELLANEOUS CONSTRUCTION APPEARS ON THE

DRAWINGS. WHILE SUCH INFORMATION HAS BEEN BASED ON

AVAILABLE RECORDS AND COLLECTED WITH REASONABLE CARE. THE ARCHITECT AND ENGINEER DOES NOT ASSUME ANY

EXPRESSED OR IMPLIED GUARANTEE THAT CONDITIONS SO

INDICATED ARE SHOWN ENTIRELY COMPLETE, CORRECT AND

REPRESENTATIVE OF THOSE ACTUALLY EXISTING. ALL CONTRACTORS SHALL SATISFY THEMSELVES AS TO ALL

EXISTING JOB CONDITIONS PRIOR TO BIDDING, AND VERIFY ALL

DIMENSIONS AT THE SITE.

2. ALL EXISTING PLUMBING SHOWN HATCHED AND/OR

DESIGNATED WITH AN "X" SHALL BE REMOVED. ALL PLUMBING

NOT INDICATED TO BE REMOVED SHALL REMAIN.

3. WHERE EXISTING PIPING IS TO BE REMOVED AT A SLAB ON

GRADE, CAP EXISTING PIPING FLUSH OR BELOW FLOOR LEVEL

SO AS NOT TO INTERFERE WITH NEW FLOOR FINISHES.

4. EXISTING PIPING SHALL BE REMOVED BACK TO PIPING TO

REMAIN. EXISTING PIPING SHALL NOT BE ABANDONED IN

PLACE UNLESS APPROVED BY THE ENGINEER AND OWNER'S

REPRESENTATIVE.

5. REPAIR PIPE INSULATION ON EXISTING PIPING WHERE

DAMAGED BY DEMOLITION OR NEW WORK.

6. DEMOLITION WORK SHALL BE COORDINATED WITH PHASEDCONSTRUCTION. PLUMBING FIXTURES LOCATED OUTSIDE OF

THE CURRENT CONSTRUCTION PHASE SHALL REMAIN

OPERATIONAL UNLESS APPROVED BY THE OWNER'S

REPRESENTATIVE.

7. REFER TO THE SPECIFICATIONS FOR CUTTING AND PATCHING

REQUIREMENTS.

8. THIS CONTRACTOR SHALL BE RESPONSIBLE FOR ALL CUTTING

AND PATCHING NECESSARY FOR THE WORK OF THIS

CONTRACT UNLESS SPECIFICALLY INDICATED OTHERWISE

WITHIN THE ARCHITECTURAL DRAWINGS OR SPECIFICATIONS.

9. ALL EXISTING BRANCH WASTE PIPING SERVING NEW FIXTURES

SHALL BE RODDED AND FLUSHED BACK TO THE WASTE STACK

OR BUILDING DRAIN TO INSURE PROPER DRAINAGE.

10. SEAL ALL EXISTING PIPE PENETRATIONS IN EXISTING

CONSTRUCTION WHERE PIPING IS REMOVED. SEALED

PENETRATIONS SHALL MATCH RATING OF THE CONSTRUCTIONIN WHICH THEY OCCUR.

11. PLUMBING CONTRACTOR SHALL REMOVE, AND REINSTALL OR

REPLACE, EXISTING CEILINGS AS REQUIRED FOR ACCESS TOPLUMBING SYSTEMS. THIS INCLUDES, CEILINGS ON THE

FLOORS BELOW THE PROJECT AREA AND AREAS OUTSIDE THE

PROJECT CONSTRUCTION LIMITS.

12. WHERE EXISTING PIPING IS REMOVED, REMAINING PIPING

SHALL BE CAPPED BELOW FINISHED FLOORS. WITHIN WALLS

AND ABOVE SUSPENDED CEILINGS.

13. CONTRACTOR SHALL VISIT JOB SITE AND BECOME FAMILIARWITH EXISTING CONDITIONS PRIOR TO STARTING WORK.

ALL NON-INSULATED PIPING

TYPICAL PIPING SUPPORT FOR

TRAPEZE HANGER DETAIL

FOR ALL INSULATED

PIPING 3/4" AND SMALLER.

TYPICAL PIPING SUPPORT

PIPING LARGER THAN 3/4".

FOR ALL INSULATED

TYPICAL PIPING SUPPORT

TRAPEZE HANGER DETAIL

TRAPEZE HANGER SECTION A-A

PROVIDE COPPER HANGER

FOR COPPER PIPE OR

ISOLATION MATERIAL

BETWEEN COPPER PIPINGAND SUPPORT OF DISSIMILAR

METAL.

STRUT SUPPORT SYSTEM

INSULATED PIPING

HIGH DENSITY

RIGID INSULATION

GALVANIZED

INSULATION PROTECTION SHIELD

NON-INSULATED PIPING

ADJUSTABLE

CLEVIS HANGER

STRUT SUPPORT SYSTEM

A

A

INSULATED PIPING

PROVIDE ISOLATION MATERIAL BETWEEN

COPPER PIPING AND SUPPORTS OF

DISSIMILAR METAL.

PROVIDE RIGID HIGH DENSITYPIPE INSULATION, AND GALVANIZEDINSULATION PROTECTION SHIELDSAT SUPPORTS, AS SPECIFIED.

ATTACH HANGER

RODS TO

BUILDING STRUCTURE

RIGID INSULATION

ADJUSTABLE CLEVIS

OR SWIVEL RING HANGER AS SPECIFIED

RIGID INSULATION

GALVANIZED INSULATION

PROTECTION SHIELD

OR SWIVEL RINGADJUSTABLE CLEVIS

HANGER AS SPECIFIED

PIPE

CLAMP DO

NOT

CRUSH INSULATIO

N

ATTACH HANGER

RODS TO

BUILDING STRUCTURE

ATTACH HANGER

ROD TO

BUILDING STRUCTURE

ATTACH HANGER

ROD TO

BUILDING STRUCTURE

ATTACH HANGER

ROD TO

BUILDING STRUCTURE

BALANCING

VALVE

BALL VALVE

CHECK

VALVE

HOT WATER EQUIPMENT PIPING.

SEE PLAN FOR SIZE.

SHUT-OFF VALVE

3/4"

BALL VALVE

IN-LINE CIRCULATING PUMP

SHUT-OFF VALVE

HOT WATER RETURN FROM

BUILDING SYSTEM.SEE PLAN FOR SIZE

UNION TYPE CONNECTION.

PIPE SO PUMP CAN BEREMOVED FOR SERVICE.

2" DIAL COMPOUND GAUGE

0 - 30" HG VACUUM0 - 60 PSI PRESSURE

CIRCULATION PUMP SCHEDULE

MANUFACTURERTAG NO. LOCATION

CP-1 MECH RM

MODEL NO.

BELL & GOSSETTecocirc

XL N 36-45 1-1/2"

SIZE

18

GPM CURRENTCONSTRUCTION

10

HEAD

FT.

STAINLESS STEEL 1/6

HP

120V-1PH -

REMARKS

EXPOSED FLUSH VALVE, 1.6 GPF.

KINGSTON

K-4325

KOHLER

COMMERCIAL GRADE, ADJUSTABLE, FLOOR MOUNTED WITH

SHORT FEET

ELONGATED, WHITE, OPEN FRONT LESS COVER, WITH

STAINLESS STEEL SELF-SUSTAINING CHECK HINGE.

ADA COMPLIANT, VITREOUS CHINA, WALL HUNG, ELONGATED

BOWL, TOP SPUD, 1.6 GPF.

1955 SSCBEMIS

SLOAN

CARRIER

FLUSH VALVE

SEAT

WATER CLOSET

WC-1

SLOAN

PLUMBING FIXTURE SCHEDULE

MODEL NO.MANUFACTURERTAG NO. DESCRIPTION

1-1/4" x 1-1/2" 17 GAUGE CAST BODY P-TRAP WITH TUBULAR

WALL BEND AND ESCUTCHEON.

PERFORATED GRID STRAINER AND TAIL PIECE

PRE-WRAPPED OFFSET DRAIN AND 1-1/2" P-TRAP WITH

REDUCING SLIP NUT, TAIL-PIECE COVER, (2) SUPPLY COVERS AND CHROME ESCUTCHEON.

1/2"x3/8" HEAVY SUPPLIES WITH HANDLE STOPS.

LAVATORY

L-1

8902McGUIRETRAP

DRAIN McGUIRE 155A

PW 2150 WCMcGUIRETRAP W/

DRAINS

SUPPLIES McGUIRE H2165CC

KINGSTON

K-2005

KOHLER ADA COMPLIANT WALL HUNG, 20"x18" VITREOUS CHINA

LAVATORY WITH 4" FAUCET CENTERS.

DECK MOUNTED FAUCET WITH GOOSENECK SPOUT,

WRISTBLADE HANDLES, CERAMIC DISC CARTRIDGES AND AERATOR OUTLET.

WITH LAMINAR FLOW OUTLET

895-317CPR

-E29

CHICAGO

FAUCET

FAUCET


SHORT FEET, FOR CONCEALED ARM MOUNTING.CARRIER

BARDON

K-4991-ET

KOHLER

COMMERCIAL GRADE, FLOOR MOUNTED WITH SHORT FEET

ADA COMPIANT, VITREOUS CHINA, WALL HUNG, 3/4" TOP

SPUD, 1.0 GPF WASHDOWN FLUSHING ACTION.

SLOAN

CARRIER

FLUSH VALVE

URINAL

U-1

SLOAN EXPOSED FLUSH VALVE, 1.0 GPF.

EXPOSED FLUSH VALVE, 1.6 GPF.

KINGSTON

K-4325

KOHLER


SHORT FEET

ELONGATED, WHITE, OPEN FRONT LESS COVER, WITH

STAINLESS STEEL SELF-SUSTAINING CHECK HINGE.

VITREOUS CHINA, WALL HUNG, ELONGATED BOWL, TOP SPUD,

1.6 GPF.

1955 SSCBEMIS

SLOAN

CARRIER

FLUSH VALVE

SEAT

WATER CLOSET

WC-2

SLOAN

NON-FREEZE TYPE WITH APPROVED VACUUM BREAKER-

BACKFLOW PREVENTER WITH WALL FLANGE, LOOSE KEY OPERATED.

65WOODFORDHOSEBIBB

HB-1

WATER HEATER SCHEDULE

MECH RM

LOCATION

CEMLINE H8SEH830 -

MANUFACTURER MODEL NO.RECOVERY

GPH ELEC

CONTROL VALVE

- 30 40 140 1523.01 2 NO

°F OUT

HOT WATERRISE(°F) GPM

TEMP.

°F IN PSILBS/HR

STEAM

AIR

YES 120 1

ELECTRICAL

VOLT PHASETAG. NO.

WH-1

CLEANOUT SCHEDULE

COVER

MATERIAL

FCO.

WCO.

FCO.

CO.

TAG

C.I.

-

BODY

-

N.B.

C.P.

FACE PLATE

-

-

-

-

-

ANCHORPLATE

-

CONCRETEPAD

-

J.R. SMITH FIG. NO. 4020-Y

BRASS RECESSED PLUG W/ SLOTTED RECESS

TYPICAL MODEL NO.

J.R. SMITH FIG. NO. 4710

J.R. SMITH FIG. NO. 4108

CARPET MARKER

MISC.

-

BRASS - -

-BRASS N.B.

IRON

-

DRAIN SCHEDULE

CLAMP

FLASHINGLOCATION

FD-1

TAG NO.

FLOOR

TYPE

N.B.

MATERIAL

C.I.

BODY TOP

5" N.B.

STRAINER

J.R. SMITH 2010-A-NB

MISC.

YES

MODEL NO.

NOTE:

PROVIDE FLASHING FOR ALL DRAINS INSTALLED ABOVE GRADE.

AREASFINISHED -



PROJECT TITLE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

MILWAUKEEINTERMODAL

STATION

PLUMBINGSYMBOLS,

ABBREVIATIONS& SHEET INDEX

02/22/19

218089.00

P000

R&D R&D

PLUMBING SHEET INDEX

No. Sheet Name

P000 PLUMBING SYMBOLS, ABBREVIATIONS & SHEET INDEX

P200 PLUMBING BASEMENT OVERALL PLANS

P201 PLUMBING FIRST FLOOR OVERALL PLANS

P202 PLUMBING SECOND FLOOR OVERALL PLANS

P204 PLUMBING ROOF PLAN OVERALL PLANS

P000

1 TYPICAL PIPE SUPPORT DETAILSP000

2 Pd-TYPICAL IN-LINE CIRCULATION PUMP


B C D E F G H I J K

1

1a

2

3

4

RAMP UP TO TRAINS

CRAWL SPACE

VESTIBULE

ELECTRICAL EQUIPMENT

MECHANICAL EQUIPMENT

B C D E F G H I J K

1

1a

2

3

4

RAMP UP TO TRAINS

CRAWL SPACE

VESTIBULE



B C D E F G H I J K

WATER

HEATER

x

CIRC.

PUMP

x

SEE HVAC DEMO

PLANS FOR

CONTINUATION

(2) WATERMETERSSTACKED VERTICALLY

6" WS

GG

GAS METER

FCO.

CO.

6"

6"

6" COND. UP

CO.

5"

CO.

4"

3"

CO.

3" W. UP

GAS VALVE

FD

GAS VALVE

3" WS

3" CW

3/4" GAS VENTGAS VENT

TO FIRE SPRINKLER SYSTEM

3/4" CW

3/4" CW UP TO HB

CO.

4" W. UP

3" W. UP

SUMP PUMP DISCHARGE

3"

4" W. UP

2"

2" HW UP

2"

3/4" HWR UP

3" CW UP

3/4"

x

B C D E F G H I J K

6" WS

GG

GAS METER

FCO.

CO.

6"

6"

6" COND. UP

CO.

5"

CO.

4"

3"

CO.

3" W. UP

GAS VALVE

FD

GAS VALVE

3" WS

3" CW

3/4" GAS VENTGAS VENT

TO FIRE SPRINKLER SYSTEM

3/4" CW

3/4" CW UP TO HB

CO.

4" W. UP

3" W. UP

SUMP PUMP DISCHARGE

3"

WH-1

CP-1

4" W. UP

2"

3/4"

2" HW UP

2"

3/4" HWR UP

2" CW

TO WH

3" CW UP

MODIFY PIPING FOR

NEW EQUIPMENT

(2) WATERMETERSSTACKED VERTICALLY

NORTH



PROJECT TITLE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

MILWAUKEE

INTERMODAL

STATION

PLUMBING

BASEMENT

OVERALL

PLANS

02/22/19

218089.00

P200

R&D R&D

1/8" = 1'-0"P200

1 BASEMENT DEMO

1/8" = 1'-0"P200

2 BASEMENT NEW

NORTH

NORTH


F.E.

F.E.C.

F.E.

F.E.

F.E.C.

F.E.C.

F.E.C.F.E.C.

WE ENERGIES MSB

MAIN

DIST

DIST MAIN

DP

EXISTING EQUIPMENT

T/DP

LCP1 LP1 PP1

DP/MB 40PSB

ATS/40PSB

ATS/4LS

DP/EM

4LS2LS

T/2LS

FACP

T/20PSB

20PSB

B C D E F G H I J K

2'-8" AFF

FUTURERETAILKIOSK

136A

BAGGAGE

GREYHOUND

104

TICKETING

AMTRAK

140

CORRIDOR116A

PHONES

116B

SECURITY

116C

CLOSET

JANITOR'S

107

CASH

111

CLOSET

132

ROOM

ELECTRICAL

131

ROOM

ELECTRICAL

122

CORRIDOR

121

RESTROOM

WOMEN'S

120

RESTROOM

MEN'S

119

ALCOVE

118

TOILET ROOM

FAMILY UNISEX

117

CORRIDOR

S-3

STAIR 3

E-2

ELEVATOR 2

S-2

STAIR 2

114

QUEUING

AMTRAK

112

BAGGAGE

AMTRAK

110

TOILET109

STORAGE

108

OFFICE

AGENT'S

106

ACCOUNTING

105

PASSAGE

113

CLAIM

BAGGAGE

101

LOBBY

ELEVATOR

100

CORRIDOR

115

TENANT SPACE

136

BAGGAGE

GREYHOUND

123

TICKETING

GREYHOUND

127

SERVICE

CUSTOMER

129

CLERK

REPORT

128

ROOM

COPY

124

CASH

125

MANAGER

TERMINAL

133

CLOSET

JANITOR

126

CORRIDOR

130

C.O.D.

F.E.

F.E.C.

F.E.

F.E.

F.E.C.

F.E.C.

F.E.C.F.E.C.

WE ENERGIES MSB

MAIN

DIST

DIST MAIN

DP

EXISTING EQUIPMENT

T/DP

LCP1 LP1 PP1

DP/MB 40PSB

ATS/40PSB

ATS/4LS

DP/EM

4LS2LS

T/2LS

FACP

T/20PSB

20PSB

B C D E F G H I J K

2'-8" AFF

FUTURERETAILKIOSK

136A

BAGGAGE

GREYHOUND

104

TICKETING

AMTRAK

140

CORRIDOR116A

PHONES

116B

SECURITY

116C

CLOSET

JANITOR'S

107

CASH

111

CLOSET

132

ROOM

ELECTRICAL

131

ROOM

ELECTRICAL

122

CORRIDOR

121

RESTROOM

WOMEN'S

120

RESTROOM

MEN'S

119

ALCOVE

118

TOILET ROOM

FAMILY UNISEX

117

CORRIDOR

S-3

STAIR 3

E-2

ELEVATOR 2

S-2

STAIR 2

114

QUEUING

AMTRAK

112

BAGGAGE

AMTRAK

110

TOILET109

STORAGE

108

OFFICE

AGENT'S

106

ACCOUNTING

105

PASSAGE

113

CLAIM

BAGGAGE

101

LOBBY

ELEVATOR

100

CORRIDOR

115

TENANT SPACE

136

BAGGAGE

GREYHOUND

123

TICKETING

GREYHOUND

127

SERVICE

CUSTOMER

129

CLERK

REPORT

128

ROOM

COPY

124

CASH

125

MANAGER

TERMINAL

133

CLOSET

JANITOR

126

CORRIDOR

130

C.O.D.

1

1a

2

3

4

.09

B C D E F G H I J K

4" VS UP

4" WS UP

3" CW, 1-1/4" HW & 3/4" HWR UP

6" COND. UP & DN.

4" W. DN.

3" CW, 2" HW & 1" HWR DN.

3" CW, 2" HW & 1" HWR

4"

2" W.

CO.

1

1a

2

3

4

.09

B C D E F G H I J K

6" COND. UP & DN.

4" W. DN.

3" CW, 2" HW & 1" HWR DN.

3" CW, 2" HW & 1" HWR

4"

4" VS UP

4" WS UP

3" CW, 1-1/4" HW & 3/4" HWR UP

2" W.

2" W. UP

3" W. UP

3" W. UP

2" W. UP

3"

3"

CO.

NORTH



PROJECT TITLE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

MILWAUKEE

INTERMODAL

STATION

PLUMBING

FIRST FLOOR

OVERALL

PLANS

02/22/19

218089.00

P201

R&D R&D

1/8" = 1'-0"P201

1 FIRST FLOOR DEMO

NORTH

1/8" = 1'-0"P201

2 FIRST FLOOR NEW

NORTH


1

1a

2

3

4

.09

B C D E F G H I J K

2-1/2" CW UP, 1" HW UP& 3/4" HWR UP & DN.

4" WS & VS UP & DN.

2" CW CAPPED CONNECTIONREMOVE ABANDON

WATER, WASTE & VENT

PIPING IN WALL

REMOVE ABANDON

WATER, WASTE & VENT

PIPING IN WALL

CO.

x

x

1

1a

2

3

4

.09

B C D E F G H I J K

L-1

L-1

U-1FD-1

FD-1

WC-1

WC-1

WC-2

2-1/2" CW UP, 1" HW UP& 3/4" HWR UP & DN.

4" WS & VS UP & DN.

NEW HW & HWR VALVES

2" CW CAPPED CONNECTION

NEW WASTE &

VENT CONNECTION

2" CW DN.

1/2" CW DN.

2" W. DN. & 1-1/2" V.

1/2" HW DN.

1/2" CW DN.

2" W. DN. & 1-1/2" V.

1/2" HW DN.

CO.

NORTH



PROJECT TITLE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

MILWAUKEE

INTERMODAL

STATION

PLUMBING

SECOND FLOOR

OVERALL

PLANS

02/22/19

218089.00

P202

R&D R&D

1/8" = 1'-0"P202

1 SECOND FLOOR DEMO

NORTH

1/8" = 1'-0"P202

2 SECOND FLOOR NEW

NORTH


1

1a

2

3

4

.09

B C D E F G H I J K

1"TO HB

1-1/2"

1-1/2"TO HVAC EQPM. x

1-1/2" CW DN.

1

1a

2

3

4

.09

B C D E F G H I J K

1-1/2"

1-1/2"

1"TO HB1-1/2" CW DN.

1-1/2" CW

HB-1

3/4" CW DN.

NORTH



PROJECT TITLE

SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

MILWAUKEE

INTERMODAL

STATION

PLUMBING

ROOF PLAN

OVERALL

PLANS

02/22/19

218089.00

P204

R&D R&D

1/8" = 1'-0"P204

1 ROOF PLAN DEMO

NORTH

1/8" = 1'-0"P204

2 ROOF PLAN NEW

NORTH


ABBREVIATIONS:(ALL ABBREVIATIONS SHOWN MAY NOT APPEAR ON DRAWINGS)

COMPRESSED AIR

ACCESS DOOR

ABOVE FINISHED FLOORAIR FLOW MEASURING STATION

ACOUSTICALLY LINED DUCT

AUTO MAKE-UP VALVE

ACCESS PANELBACKDRAFT DAMPER

BLIND FLANGE

BOILER FEED

BETWEEN JOISTSBALANCING VALVE

CHEMICAL FEED

CHECK VALVE

CHILLED/HOT WATER RETURNCHILLED/HOT WATER SUPPLY

CONDENSER WATER RETURN

CONDENSER WATER SUPPLY

COMBINATION VALVECHILLED WATER RETURN

CHILLED WATER SUPPLY

CLEAR WATER WASTE

DRAINDIFFERENTIAL PRESSURE TRANSMITTER

DUCT SMOKE DETECTOR

DOOR TRANSFER GRILLE

DRAIN VALVEDOMESTIC WATER

EXHAUST AIR

ELECTRICAL CONTRACTOR

EXHAUST GRILLEFLEXIBLE CONNECTION

FLOW CONTROL VALVE

FIRE DAMPER

FLOW METERFIRE/SMOKE DAMPER

NATURAL GAS

GENERAL CONTRACTOR

GLOBE VALVEGLYCOL WATER RETURN

GLYCOL WATER SUPPLY

HVAC CONTRACTOR

HIGH PRESSURE CONDENSATEHIGH PRESSURE STEAM

HOT WATER RETURN

HOT WATER SUPPLY

LP GASLOW PRESSURE CONDENSATE

LOW PRESSURE STEAM

MANUAL AIR VENT

MECHANICAL CONTRACTORMOTOR OPERATED DAMPER

MINIMUM

MAKE-UP WATER

NOT IN CONTRACTOUTSIDE AIR

OIL RETURN

OIL SUPPLY

PUMPPLUMBING CONTRACTOR

PUMPED CONDENSATE RETURN

POWER ROOF VENTILATOR

RETURN AIRRETURN AIR OPENING

REHEAT COIL

RADIANT CEILING PANEL

RETURN GRILLEREFRIGERANT LIQUID

REFRIGERANT SUCTION

SMOKE DAMPER

SUPPLY AIRSLOT DIFFUSER

SUPPLY GRILLE

SOLAR HEATING WATER RETURN

SOLAR HEATING WATER SUPPLYSHUT OFF VALVE

STARTER

TRANSFER AIR

TRANSFER AIR OPENINGTEMPERATURE CONTROL CONTRACTOR

TEMPERATURE CONTROL PANEL

TEMPERATURE CONTROL VALVE

TRANSFER GRILLETHRU JOISTS

TIGHT TO STRUCTURE

TYPICAL

UNDER CUT DOORVENT

VOLUME DAMPER

VARIABLE FREQUENCY DRIVE

WATER FLOW MEASURING STATIONWELL FIELD RETURN

WELL FIELD SUPPLY

WATER RELIEF VALVE

WELDED WIRE MESH

A

AD

AFFAFMS

ALD

AMV

APBDD

BF

BF

BJBV

CF

CHV

CHWRCHWS

CR

CS

CVCWR

CWS

CWW

DDPT

DSD

DTG

DVDW

EA

E.C.

EGFC

FCV

F

FMFS

G

G.C.

GLVGR

GS

H.C.

HPCHPS

HWR

HWS

LPLPC

LPS

MAV

M.C.MOD

MIN.

MUW

NICOA

OR

OS

PP.C.

PCR

PRV

RARAO

RC

RCP

RGRL

RS

S

SASD

SG

SOLR

SOLSSOV

STR

TA

TAOT.C.C.

TCP

TCV

TGTJ

TTS

TYP.

UCDV

VD

VFD

WFMSWFR

WFS

WRV

WWM

SYMBOLS:(ALL SYMBOLS SHOWN MAY NOT APPEAR ON DRAWINGS)

UCD

DG

MOD

D

DUCT (R)ISE / (D)ROP

RADIUS ELBOW1.5 W 1 W

MITERED ELBOW WITHOUT

TURNING VANES

MITERED ELBOW WITH

TURNING VANES

RECTANGULAR BRANCH

TAKEOFF

ROUND BRANCH

TAKEOFF

BULLHEAD TEE FOR

RETURN OR EXHAUST

BULLHEAD TEE FOR

SUPPLY

RADIUS TEE

ECCENTRIC TRANSITION

CONCENTRIC TRANSITION

DUCT CAP

SUPPLY AIR DUCT

RETURN AIR DUCT

EXHAUST AIR DUCT

FLEXIBLE DUCTWORK

HIDDEN DUCTWORK

DUCT SIZE

(FIRST FIGURE IS SIDE SHOWN)

SUPPLY GIRLLE

(4-WAY THROW)

(E)XHAUST / (R)ETURN

(T)RANSFER GIRLLE

TYPE OF GRILLE:(S)UPPLY(R)ETURN(E)XHAUST(T)RANSFER

SCHEDULE

DESIGNATION

CFM

DOOR UNDERCUT

DOOR GRILLE

SUPPLY GIRLLE

(2 OR 3-WAY THROW)

MOTOR OPERATED DAMPER

FIRE DAMPER

SMOKE DAMPER

FIRE / SMOKE DAMPER

BALANCING DAMPER

BALL VALVE

BALANCING VALVE

BUTTERFLY VALVE

SHUT-OFF VALVE

STRAINER

THERMOMETER

UNION

PIPE/DUCT PITCH

PRESSURE GAUGE

FLOW METER

TEST CONNECTION

PIPE GUIDE

ANCHOR

FLEXIBLE CONNECTION

PIPING CAP

BLIND FLANGE/CLEANOUT

MANUAL AIR VENT

GAUGE COCK

DIFFERENTIAL PRESSURE SENSOR

FLOW SENSORFS

P

FM

CHILLED WATER RETURN

CHILLED WATER SUPPLY

HOT WATER RETURN

HOT WATER SUPPLY

DOMESTIC WATER

DRAIN

VENT

HUMIDISTAT

CUMULATED THERMOSTAT

THERMOSTAT

H

TC

T

HS HUMIDITY SENSOR

TEMPERATURE SENSORTS

S STATIC PRESSURE SENSOR

NATURAL GAS

X=CENTERLINE OF PIPEXOR BOTTOM OF DUCT

THERMOSTATTN

NIGHT SETBACK

MAKE-UP WATER

XY

X=SECTION NUMBERSHOWN ON DRAWING SHEET Y

DEW POINT SENSORDP

CONNECT TO EXISTING

TEMP. CONTROL VALVE

CHECK VALVE

FLOW CONTROL VALVE

COMBINATION VALVE

AUTO MAKE-UP VALVE

PRESS. RELIEF VALVE

PRESS. REDUCING VALVE

FLOW CONTROL/SHUTOFF VALVE

DRAIN VALVE

3-WAY VALVE(MOTOR ACTUATED)

HWS

HWR

CWS

CWR

DW

V

D

G

MUW

26/12

SG-2(110)

F

S

FS

D

ROUND DUCT (R)ISE / (D)ROP

REHEAT COIL

ACCESS DOOR

FLEXIBLE CONNECTION

PIPE TAKE-OFF

DSD DUCT SMOKE DETECTOR

SINGLE LINE AIR DUCT

HIGH PRESSURE CONDENSATEHPC

HIGH PRESSURE STEAMHPS

LOW PRESSURE CONDENSATELPC

LOW PRESSURE STEAMLPS

SQUARE TO ROUND TRANSITION

REMOVE EXISTING

REFRIGERANT LIQUID

PUMPED CONDENSATE

RETURN

CHILLED/HOT WATER SUPPLY

CHILLED/HOT WATER RETURN

GLYCOL SUPPLY

REFRIGERANT SUCTION

OIL RETURN

GLYCOL RETURN

OIL SUPPLY

CHWR

CHWS

PCR

RL

GS

OR

RS

GR

OS

CONDENSER SUPPLYCS

CONDENSER RETURNCR

BOILER FEEDBF

CHEMICAL FEEDCF

COMPRESSED AIR

LP GAS

A

LP

OUTSIDE AIR DUCT

APPLICABLE CODES AND STANDARDSTHE MECHANICAL SYSTEMS SPECIFICATIONS WILL REFERENCE THE FOLLOWING CODES, GUIDELINES AND STANDARDS AND ARE DESIGNED TO MEET OR EXCEED THESE STANDARDS.

INTERNATIONAL BUILDING CODE - 2015 EDITION.INTERNATIONAL ENERGY CONSERVATION CODE - 2015 EDITION.INTERNATIONAL MECHANICAL CODE - 2015 EDITION.INTERNATIONAL FUEL GAS CODE - 2015 EDITION.NATIONAL ELECTRICAL CODE - 2017 EDITION.BOILER AND PRESSURE VESSELS CODE, WISCONSIN ADMINISTRATIVE CODE SPS 341 - MOST CURRENT.FACILITY GUIDELINES INSTITUTE GUIDELINES FOR HEALTH CARE - 2014 EDITION.ASHRAE 170-2008 WITH ADDENDUMS ADOPTED BY THE STATE OF WISCONSIN DHS.NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) CODE - 2010 EDITION.AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS (ASHRAE).AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME).AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI).SHEET METAL AND AIR CONDITIONING CONTRACTORS NATIONAL ASSOCIATION, INC. (SMACNA).DEPARTMENT OF NATURAL RESOURCES (DNR).AMERICAN DISABILITIES ACT (ADA).

a.b.c.d.e.f.g.h.i.j.k.l.m.n.o.

1. CERTAIN AREAS OF THE BUILDING UTILIZE A

RETURN AIR PLENUM. ALL MATERIALS IN PLENUM

SPACES SHALL MEET NFPA 90 AND IMC 602.

2. INSTALL ALL DUCTWORK AND PIPING TO BEST

SUIT FIELD CONDITIONS; DRAWINGS ARE

DIAGRAMMATIC AND SHALL NOT BE SCALED TODETERMINE EXACT LOCATION.

3. ALL RECTANGULAR DUCTWORK DIMENSIONS ARE

INTERIOR DIMENSIONS, ADJUST SHEET METALSIZE FOR DUCT LINING WHERE APPLICABLE.

4. CERTAIN OFFSETS ARE SHOWN IN THE

DUCTWORK AND PIPING TO INDICATE THEGENERAL POSITION AND RELATIONSHIP OF THE

SYSTEMS. PROVIDE ADDITIONAL OFFSETS,

SIMILAR TO THOSE SHOWN, AS REQUIRED BY

FIELD CONDITIONS.

5. ALL BRANCH DUCTWORK TAKEOFFS SHALL BE

EXPANDED AT 45° ANGLE, FOR BOTH HORIZONTAL

AND VERTICAL TAKEOFFS.

6. PROVIDE TRANSITIONS FOR TAKEOFFS FROM

BRANCH DUCTWORK TO GRILLES AND DIFFUSERS

AS REQUIRED. SEE GRILLE AND DIFFUSERSCHEDULES FOR SIZES.

7. CONTRACTOR MAY USE SPIRAL ROUND

DUCTWORK FOR RECTANGULAR TOILET ANDMISCELLANEOUS EXHAUST DUCTWORK. ROUND

DUCTWORK SHALL BE EQUIVALENT SIZE AS

RECTANGULAR DUCT.

8. CONTRACTOR MAY USE UP TO FIVE (5) FEET OF

FLEXIBLE DUCT FOR CONNECTION OF EXHAUST

GRILLES TO TOILET AND MISCELLANEOUS

EXHAUST DUCTWORK. ONLY ONE (1) 90° BENDALLOWED PER SECTION OF FLEX.

9. COORDINATE ALL DUCT AND PIPE CONNECTIONS

REQUIRED FOR OWNER FURNISHED EQUIPMENT.PROVIDE DAMPERS, SHUTOFF VALVES, ETC. AS

REQUIRED FOR COMPLETE INSTALLATION AND

RECOMMENDED BY EQUIPMENT MANUFACTURER.

VERIFY EXACT REQUIREMENTS WITH EQUIPMENTMANUFACTURER.

GENERAL NOTES



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

MECHANICALSYMBOLS,

ABBREVIATIONS,SHEET INDEX

02/22/2019

218089.00

M000

R&D R&D

MECHANICAL SHEET INDEX

M000 MECHANICAL SYMBOLS, ABBREVIATIONS, SHEET INDEX

M100 PENTHOUSE MECH. DEMOLITION PLANS

M200 PENTHOUSE MECH. NEW CONSTRUCTION PLANS

M210 BASEMENT AND SECOND MECH. FLOOR PLANS



M600 MECHANICAL SCHEDULES


T

2

M100

MOD

MOD

EXISTING PRE-HEAT

COILS WITH BY-PASS.(2-STACKED)

EXIST. DX

COOLING COILS(4-STACKED)

EXISTING

SUPPLY FAN (EXSAF-1)

60/18 SA DN.

60/18 SA DN. INTERNAL DIVIDER

EXIST. 72/18

RELIEF DAMPER

MOD

EXISTING

RETURNRELIEF FAN

REFR. COMP.

NO. 2

REFR.

COMP. NO. 1

EXIST. CONTROL

PANEL(S)STARTERS, ETC.

26/42 DN TO 1ST FLOOR.

36/42 DN TO 3RD FLOOR.

26/42 DN TO 2ND FLOOR.

F

EX-EF

EXIST. FILTER

CLEANING TANK

F EXTG

60/46

EXISTING

EVAPORATIVECONDENSER

3 1/8"

3 1/8"

3 5/8"

3 5/8"

2 1/8"

2 1/8"


ROOM

PENTHOUSE

STAIRS

-

RS

RS

RS

RS

RL

RL

RL

RL

HG

RL

RL

HGRL

RL

RL

RL

RL

RL

HG

HG

4"

2"

2"

1"

TCV

2" EXLPR DN.

4" EXLPS DN.

EXISTING

AHU(AC-1)

1

1

22

2

2

2

2

22

4 3

5

5

6

6

2

2

6

6

EXIST. 72/18

RELIEF DAMPER

7

7

22

6

6

2

2

1 11

8

8MOD

9

10

11

11

12

2

M200

10

10

10

GV

11

EXIST. CONTROL


15

EXIST. LOUVER

AND DAMPER

16

16

16

17

19

17

EXIST. ACCESS TO

REMAIN.

EXIST. FILTER

BANK TO REMAIN.

EXIST. ACCESS TO

REMAIN.

EXISTING 2"

DRAIN

EXIST. BAFFLE

PLATE TO REMAIN.

D E F G H

11

EXIST. SILENCER

18

18

18

18

1717

1717

T.O. PLANK146' - 6"

T.O. JOIST (PENTHOUSEROOF)

160' - 10"

22

2 2

222

3

3

3

3

4

EXAC-1

13

EXIST. INTAKE

LOUVER

14 14

14

11

11

11

11

12

12

9

9

10

10

10

10

10

EXIST. 2" LPR

DN.

EXIST. 4" LPS

DN.

11

REFR.

COMP. NO. 2

REFR. COMP.

NO. 1

EXIST. CONTROL


1

11

22

EXIST. CONTROL


2 EXISTING

PRE-HEAT COIL

EXIST. DX

COOLING COILS(4-STACKED)

7

77

2

2

2

2

EXIST.

RECEIVER

2

2

EXIST.

EVAPORATIVE CONDENSING UNIT

16

8

17

17

EXISTING

PRE-HEAT COIL

EXISTING FILTER BANK

EXISTING BAFFLE PLATE

D E F G H

DEMOTION KEYED NOTES

1

2

3

REMOVE EXISTING REFRIGERANT

COMPRESSORS AND ASSOCIATED CONTROL

PANELS (STARTERS, GAUGES, ETC.) IN ITS ENTIRETY INDICATED AS DASHED. (EXIST. CONC.

BASE TO REMAIN.)

REMOVE EXISTING REFRIGERANT SUCTION AND LIQUID LINES INDICATED AS DASHED.

REMOVE EXISTING REFRIGERATION COOLING

COILS AND ASSOCIATED COIL SUPPORT INDICATED AS DASHED. TOTAL OF (4) STACKED

COILS.

REMOVE EXISTING COPPER COOLING COIL GUTTER(S) TYPICAL OF THREE.

REMOVE EXISTING COOLING COIL BLANK-OFF

PANELS AS REQUIRED.

REMOVE HOT GAS (REFRIGERANT) LINES

INDICATED AS DASHED.

REMOVE EXISTING LIQUID REFRIGERANT

RECEIVERS, AND ASSOCIATED RACK SUPPORTS,

DRAINS, REFRIGERANT PIPING AND SPECIALTIES

ETC., INDICATED AS DASHED.

REMOVE EXISTING EVAPORATIVE CONDENSING

UNIT AND ASSOCIATED SPRING VIBRATION

ISOLATION INDICATED AS DASHED.

REMOVE EXISTING MIN. O.A. STEAM PREHEAT

COILS, ASSOCIATED COIL SUPPORT INDICATED

AS DASHED. TYP. OF (2) COILS.

REMOVE EXISTING LOW PRESSURE STEAM AND

LOW PRESSURE RETURN PIPING AND

ASSOCIATED VALVES AS INDICATED.

REMOVE EXISTING MOTOR OPERATED DAMPERS


REMOVE EXISTING FILTER RACK INDICTED AS

DASHED.

EXISTING AHU COOLING COIL OFFSET. PRESERVE OFFSET TO ACCOMMODATE NEW

CHILLED WATER COILS. SEE NEW

CONSTRUCTION PLANS FOR FURTHER

INFORMATION.

EXISTING UNIT DRAIN PAN AND 2" DRAIN TO

REMAIN.

REMOVE EXISTING EVAP. COND. PUMP,

ASSOCIATED PIPING, CONTROLS AND

ELECTRICAL CONNECTIONS INDICTED AS

DASHED.

REMOVE EXISTING 4" CONC. BASE AND

SUPPORT PLATFORM INDICATED AS DASHED.

SELECTIVELY REMOVE EXISTING SLOPED

INSULATED METAL PANEL AND EXISTING METAL

PANEL CLADDING AND ACCESSORIES FROM

STRUCTURAL STEEL BEAMS AND COLUMNS. REMOVE AT THE EXISTING VERTICAL JOINT

NEAREST TO THE EXISTING CONCRETE BLOCK

WALL. PROVIDE PRE-FINISHED WHITE, 16 GA.

BREAK METAL END CLOSURE TO FINISH OFF

THE PANEL TO REMAIN CONDITIONS.

EXISTING STEEL COLUMNS AND BEAMS TO

REMAIN IN PLACE.

SAND AND WIRE BRUSH ALL RUST FROM

EXISTING BEAMS AND COLUMNS, PRIVE AND

PAINT WITH HIGH PERFORMANCE EXTERIOR

COATING. 2 COATS.

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

PROJECT TITLE



PROJECT 2019

PENTHOUSEMECH.

DEMOLITIONPLANS

02/22/2019

218089.00

M100

R&D R&D

1/4" = 1'-0"1 PENTHOUSE - MECHANICAL DEMOLITION PLAN

1/4" = 1'-0"2 MECHCANICAL SECTION AT PENTHOUSE - DEMOLITION


T

2

M100

26/42 DN TO 1ST FLOOR.

36/42 DN TO 3RD FLOOR.

26/42 DN TO 2ND FLOOR.

F

EX-EF

F

60/46


ROOM

PENTHOUSE

STAIRS

2" LPR DN.

4" LPS DN.

EXIST. SILENCER

EXIST. 72/18

RELIEF DAMPER

EXIST. 72/18

RELIEF DAMPER

EXISTING

RETURNRELIEF FAN

2

M200

11

2

2

CC-1

5" GS

5" GR

4

3

EXIST. ACCESS TO

REMAIN.

EXIST. ACCESS TO

REMAIN.

EXIST. FILTER

BANK TO REMAIN.

M.O.D.

M.O.D.

M.O.D.

F-1 & F-2 5

HC-1 6

EXISTING

SUPPLY FAN (EXSAF-1)

EXISTING

AHU(AC-1)

60/18 SA DN.

60/18 SA DN.

INTERNAL DIVIDER

EXISTING 2"

DRAIN

6

4" LPS

4" LPS

8 9

2" LPR

EXIST. FILTER

CLEANING TANK

5" GS

5" GS

5" GS

5" GR

AS-1

CWP-1CWP-2

11

11

5" GS

5" GR

RISE

5" GS

5" GR

CWST-1

GSF-1

ET-1

NEW 4" CONC.

EQUIP. PAD5" GS

5" GS

ACC-1

12 12

12

12

CWP-1

(VFD)

CWP-2

(VFD)

TCP-1

TCP-2

EXIST. BAFFLE

PLATE TO REMAIN.

17

17

17 17

18

18

D E F G H

20

M.O.D.13

1313

13

10

10

ISOLATION

DAMPER WITH MOD

ISOLATION

DAMPER WITH MOD

SD

T.O. PLANK146' - 6"

T.O. JOIST (PENTHOUSEROOF)

160' - 10"

HC-1

HC-1

MIN. O.A.

(7255)

MIN. O.A.

(7255)

13

13

13

1414

EXAC-1

EXISTING FILTER BANK

EXISTING BAFFLE PLATE

15

15

4" LPS

4" LPS

13

2" LPR

2" LPR

985" GS

1

1

1

CC-1CC-1

CC-1

CC-1

3

1616

1111

5" GR

5" GR

5" GS

5" GR

5" GR

PERSON

(6'-0" )

5" GR

5" GR

CWP-1CWP-2

10

GSF-1

AS-1

ET-1

NEW 4" CONC.

EQUIP. PAD.

CWST-1

5" GSWFMS-1

5" GR

5" GS

5" GR

5" GS

1818

12

12

ACC-1

19

D E F G H

20

19

NEW CONSTRUCTION KEYED NOTES

1

2

3

NEW BUILT-UP AHU COOLING COIL DRAIN PAN.

SEE DETAIL #2 ON SHEET M501.

NEW GLYCOL COOLING COIL BLANK-OFF PANEL.

M.C. SHALL FIELD VERIFY EXACT SIZE

REQUIRED.

NEW GLYCOL CHILLED WATER COIL(S) CC-1.

TYPICAL OF FOUR STACKED COILS.

SEE AHU GLYCOL CHILLED WATER COIL DETAIL #2 ON SHEET M500 FOR INDIVIDUAL COIL PIPING

SIZE DATA.

NEW BUILT-UP FILTER FRAME. SEE FILTER SCHEDULE ON SHEET M600 FOR FURTHER

INFORMATION.

NEW STEAM O.A. MIN. PRE-HEAT COIL(S) HC-1. TYPICAL OF TWO STACKED COILS.

SEE AHU STEAM COIL DETAIL #3 ON SHEET M500

FOR INDIVIDUAL COIL PIPING SIZE DATA.

NEW STEAM BY-PASS GLOBE VALVE.

NEW STEAM TEMPERATURE CONTROL VALVE.

DUCT SMOKE DETECTOR. PROVIDED BY E.C.

EXISTING CONCRETE EQUIP. PADS.

AIR-COOLED CHILLER REQUIRED CLEARANCE.

NEW MOTOR OPERATED DAMPER.

EXISTING UNIT DRAIN PAN AND 2" DRAIN TO

REMAIN.

EXISTING AHU COOLING COIL OFFSET. MODIFY OFFSET AS REQUIRED TO ACCOMMODATE NEW

GLYCOL CHILLED WATER COILS.

M.C. SHALL PROVIDE NEW STRUCTURALSUPPORTS AS INDICATED.

CODE REQUIRED MIN. ELECTRICAL PANEL

CLEARANCE.

MODIFY EXISTING WALL OPENINGS TO

ACCOMMODATE NEW GLYCOL CHILLED WATER

PIPING. PATCH EXISTING OPENINGS AS REQUIRED.

NEW STRUCTURAL CHILLER SUPPORT STAND.

SEE STRUCTURAL DRAWINGS AND DETAILS FOR ACTUAL SUPPORT INFORMATION.

THE GLYCOL STORAGE TANK REFLECTED HAS

BEEN SIZED TO ACCOMMODATE THE BASIS OF DESIGN CHILLER. PER BASIS OF DESIGN

CHILLER MANUFACTURE, A TWO MINUTE LOOP

IS REQUIRED. DEPENDING ON PURCHASED

CHILLER, THE M.C. SHALL CONFIRM THE MIN. VOLUME REQUIREMENTS OF THE CHILLER, AND

PROVIDE A STORAGE TANK AS REQUIRED BY

THE CHILLER MANUFACTURE AT NO ADDITIONAL

COST TO THE PROJECT. M.C. SHALL ALSO

PROVIDE ALL NECESSARY STRUCTURAL ANALYSIS AS NEEDED.

4

5

6

7

8

9

10

11

12

13

14

15

17

16

18

19

20

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

PROJECT TITLE



PROJECT 2019

PENTHOUSEMECH. NEW

CONSTRUCTIONPLANS

02/22/2019

218089.00

M200

R&D R&D

1/4" = 1'-0"1 PENTHOUSE - HVAC NEW CONSTRUCTION

1/4" = 1'-0"2 MECHCANICAL SECTION AT PENTHOUSE -NEW CONSTRUCTION


J K

J K

DEMOTION KEYED NOTES

1

2

3

REMOVE EXISTING LPS PIPING & VALVES


REMOVE EXISTING. LPR PIPING INDICATED AS

DASHED.

EXISTING DOMESTIC HOT WATER HEATER

REMOVAL BY P.C.. SEE PLUMBING DRAWING FOR

ADDITIONAL INFORMATION.

REMOVE EXISTING DUCTWORK INDICATED AS

DASHED.

REMOVE EXISTING DOOR TRANSFER GRILLES INDICATED AS DASHED.

REMOVE EXISTING COND. COOLER, RECEIVER,

METER, PIPING , VALVES AND PLATFORM IN ITS ENTIRETY INDICATED AS DASHED.

4

5

6

NEW CONSTRUCTION KEYED NOTES

1

2

NEW STEAM HOT WATER HEATER (BY P.C.)

MC SHALL CONNECT NEW 5" LPS TO NEW HOT WATER HEATER (BY P.C.). COORDINATE WORK

WITH PC.

M.C. SHALL CONNECT NEW 2" LPR TO HOTWATER HEATER (BY P.C.). COORDINATE WORK

WITH P.C.

3

6"

LP

S6

"L

PS

6" LPS

EXISTING

DOMESTIC

HOT WATERHEATER

3

2

1

CAP

J K

2" LPR

1-1

/4"

LP

R

CAP

6

66

EXISTING UTILITY TUNNEL


-

6"

LP

S6

"L

PS

6" LPS

2

1

J K

5" LPS

2" LPR

3

2" LPR

EXISTING UTILITY TUNNEL


-

16/6

16/6

24/14

24/1

0

EXTG

EXTG5

5

16/6

EXEG(300)

EXEG(300)

4

4

14/6

EXEG(300)

EXEG(300)

14/6

16/6

16/6

16/624/14

24/1

0

A

NEW TRANSFER

ASSEMBLY BELOWEXISTING EXHAUST

AVOLUME

DAMPER (TYP.)

WOMEN

205

MEN

204

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

PROJECT TITLE



PROJECT 2019

BASEMENT ANDSECOND MECH.FLOOR PLANS

02/22/2019

218089.00

M210

R&D R&D

1/4" = 1'-0"1 PARTIAL BASEMENT - DEMOLITION

1/4" = 1'-0"2 PARTIAL BASEMENT - NEW WORK

1/4" = 1'-0"3 SECOND FLOOR EXISTING TOILET ROOMS - HVAC DEMOLITION PLAN

1/4" = 1'-0"4 SECOND FLOOR EXISTING TOILET ROOMS - HVAC NEW CONSTRUCTION PLAN


NO SCALE

NO SCALE

NO SCALE

NO SCALE

TS

P

FSTS

TS

TS

TS

NO SCALE

CHILLED WATER SYSTEM SCHEMATIC

AHU CHILLED WATERCOOLING COIL PIPING DETAIL

HYDRONIC AIR REMOVAL AND EXPANSION CONTROLSYSTEM PIPING SCHEMATIC

WATER FILTER & CHEMICAL FEEDER PIPING DETAIL

AIR COOLED CHILLER PIPING DETAILNO SCALE

AHU STEAM HEATING COIL PIPING DETAIL

NO SCALE

6

1

2

7

4

5LOW PRESSURE STEAM END OF MAINDRIP TRAP DETAIL

3

AIR SEPARATOR AS-1

PIPE THERMOMETER (TYP.)

SRV-1

GR

376 GPM

VFD

ACC-1

ROOF

STRUCTURALSTEEL SUPPORTSTANDBY G.C.

AIR COOLEDCHILLER(SEE PIPING DETAIL)

GS

GR

N.C.

N.O.

N.O.

GS

ET-130% P.G.

B

SUPPORT PIPE ATFLOOR (FOR PIPES6" AND OVER)

VALVE (TYP.)3/4" DRAIN

LOCATION (FORHOUSING WALL

BUILT-UP UNITS)

F

2 WAY

CONTROL VALVE

COOLING COIL PIPING DATA

REQUIRED (TYP.)

REQ'D FORVALVES NOT

UNITS (TYP.)SINGLE COIL

UNION/FLANGE

TEST CONN.(TYP.)

(TYP.)

F

REDUCER AS

AIR VENT

THERMOMETER

MANUAL

(TYP.)

THREE WAY

CONTROL VALVEARRANGEMENT

TEMPERATURE

NOTE:NC

CWR

CWS

N.O.

E

COILNO. A

79.8CC-1

COIL GPM

B

79.8

E

5"

PIPE SIZE

F

2-1/2"

COIL

COIL

FOR PACKAGED

REMOVAL (TYP.)PERMIT COILUNITS TO

A

PIPING OFFSET

SHUTOFF VALVE (TYP.)

WHERE SCHEDULED

FLOW CONTROL VALVE

BALANCE VALVE (TYP.)

E

CWS

CWR

TWO WAY TEMPERATURECONTROL VALVE

PIPE PER MFR'S SPEC.)

DISTANCES OF STRAIGHT

SCHEDULED (MIN.

FLOW METER WHERE

VALVE NO.

-

3 WAY

X -

METERNO.

FLOWCONTROLFLOW

.

REMARKS

.

D

F

F

COIL

COIL

C

C

79.8

D

79.8

E

376 GPM

2"

VFD

2"

5"

5"

5" 5"

GS

5"

SAFETY RELIEF VALVE(CHILLED WATER SYSTEM

FROM GLYCOL FILLSYSTEM (GSF-1)

PIPE DISCHARGE TONEAREST FLOOR DRAIN

SHUTOFF VALVELOCK OPEN OR REMOVEHANDLE AFTER CHARGING

- NOT ALL COMPONENTS ARE AT SAME LOCATION. REFER TO FLOOR PLAN FOR EXACT LOCATIONS.

- CONNECTIONS TO DOMESTIC WATER AND GLYCOL FILL SYSTEMS ARE SHOWN FOR INFORMATION ONLY.

- SRV SETTING APPLIES TO SRV'S INDICATED IN THIS SCHEMATIC AND TO ALL SRV'S INSTALLED IN THE SYSTEM.

MANUAL AIR

AS AIR SEPARATOR

TO NEAREST FLOOR DRAIN

AUTOMATIC AIR VENTPIPE DISCHARGE (3/4")

FOR GLYCOL SYSTEMSOR TO GLYCOL FILL TANK

PRESSURE GAUGE w/GAUGE COCK (TYP.)

SUPPORT INDEPENDENT

- HORIZONTAL AND VERTICAL EXPANSION TANKS ARE SHOWN FOR INFORMATION ONLY.PROVIDE STYLE OF EXPANSION TANK AS INDICATED ON THE SCHEDULE AND DRAWINGS.

CONNECT ALL SYSTEMS TO DOMESTIC WATER UNLESS THEY ARE FILLED WITH GLYCOL.

NOTES:

TANK

VERTICALEXPANSION

CONNECTIONCHARGE

OF PIPING

EXPANSIONTO OTHER

TANKS

AIR SEPARATOR

A

TAPPING

RETURN FROM

PIPE SIZE SAME

SYSTEM

MIN

.12"

D

1/2" DRAINVALVE (TYP.)

TANK

C

SIDE OF MAINCONNECT TO

ONLY

A

3/4"

VENT (TYP.)

ONLY)

A

B

SCHEMATIC PIPING DATA

SYSTEMSERVED

EXP. TANKGLYCOL%

NO.(s)

EXP. TANKCHARGEPSIG A

SRVSETTINGPSIGNO.(s)

SRVB C D

TO PUMPS

REMARKS

30 P.G. 1 12 1

1. COORDINATE SAFETY RELIEF VALVE SETTING WITH OWNER.

GLYCOL CHILLED WATER SYSTEM 5" 1/2" 1" -100 SEE NOTES 1 BELOW

PITCH DOWN (TYP.)

5" GS

5" GR

AIR COOLED CHILLER

STRAINER

TEMPERATURE SENSOR (TYP.)

PADDLE SWITCH FLOW SENSOR

TEST WELL (TYP.)

BALANCING VALVE

PRESSURE GAUGE

GAUGE COCK (TYP.)NOTE:

P/T TAP (TYP.)

UNION (TYP.)

SHUT-OFF VALVE (TYP.)

PROVIDE DRAIN VALVE AND BRASSCAP AT EACH DRAIN CONNECTION ONCHILLER EVAPORATOR HEAD (TYP.)

1. PITCH CWS AND CWR PIPING TOWARDSPIPING PENETRATION THROUGH ROOF.

2. ARRANGE PIPING TO PERMIT TUBECLEANING

PROVIDE MANUAL AIR VENT ATEACH VENT CONNECTION ONCHILLER EVAPORATOR HEAD (TYP.)

12" MIN. (TYP.)LPC

TRAP (TYP.)

E

COIL

COIL

C

B

COIL

A

A

HEATING COIL PIPING DATA

NO.COIL

D

D

COIL #/HR

B C D

PIPE SIZE

E F G H

STRAINER (TYP.)


D

VACUUM BREAKER (TYP.)

LPS

REMARKS

GLOBE VALVE

YES

T.C.V. BYPASS

JI NO

3/4" DRAIN VALVE (TYP.)

367 367 - 4" 3" 3" - 2" 2" - X - O.A. MIN. PREHEAT

VALVE NOT REQUIREDFOR COILS WITHOUTT.C.V. BYPASS

UNION/FLANGE (TYP.)

REDUCER ASREQUIRED (TYP.)

TEMPERATURECONTROL VALVE

TEMPERATURE CONTROL VALVEBYPASS (WHERE SCHEDULED)

VALVE NOT REQ'DFOR SINGLE COILUNITS (TYP.)

HOUSING WALLLOCATION (FORBUILT-UP UNITS)

DIRT LEG FULL SIZE OFCOIL OUTLET (TYP.)

UNION (TYP.)

LPC TO CONDENSATE PUMP


LPS

STRAINER

1"

NIPPLE & END CAP (TYP.)

TRAP (3/4" UNLESSNOTED OTHERWISE)

3/4" BLOWDOWN VALVE

1" PIPE SIZE UNLESSNOTED OTHERWISE

BLOW DOWNVALVE

DIRT LEG SAMESIZE AS MAIN

12"MIN.

HC-1 & 2

GR

5"

GS

5"

DIFFERENTIAL PRESSURESENSOR (FLOW DETECTION)

F

H

I

G

J

PIPING OFFSET FORPACKAGED UNITS TO PERMITCOIL REMOVAL (TYP.)

WF-134 GPM

CHILLED WATER PUMPSCWP-1 & CWP-2

TO GLYCOL FILLTANK GSF-1

(100%STANDBY) TYPICAL

COOLING COILS

CHILLED WATERBUFFER TANKCWST-1

3/4"

3/4" VENT VALVE

1/4"

B

SYSTEM

SUPPLY TO BUILDING

BA

PIPE SIZE

WF-1

GPMSYSTEM FILTER

GPM SUPPORT

A

WATER FILTER

A

B

WATER FILTER PIPING DATA

NO.

342 34 FLOOR 5" 2" GLYCOL CHILLED WATER SYSTEM

RETURN FROM BUILDING

UNION (TYP.)

CHECK VALVE

BALANCE VALVE

3/4"

FLOW CONTROLVALVE

FCV-1

SUPPLY FROMSYSTEM PUMPS

RETURN TOSYSTEM PUMPS

PRESSUREGAUGE

GAUGE COCK(TYP.)



SHUTOFFVALVE(TYP.)

FLOWCONTROLVALVE

FILTERCONNECTIONS

CHEMICALFEEDER

3/4" DRAIN VALVE WITH3/4" HOSE CONNECTIONAND PRESSURE RATEDCAP (TYP.)

3/4" DRAIN VALVE WITH3/4" HOSE CONNECTIONAND PRESSURE RATEDCAP (TYP.)

EXTERIOR INTERIOR

WATER FLOW METERWFMS-1

FLEXIBLE CONNECTION (TYP.)

REFER TO COOLINGCOIL PIPING DETAIL2/M500



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

MECHANICALDETAILS

02/22/2019

218089.00

M500

R&D R&D


FLOOR

NO SCALE

INSULATED PIPE SUPPORT DETAILNO SCALE

NO SCALE

GLYCOL SYSTEM FEEDER DETAILNO SCALE

END SUCTION PUMP PIPING DETAIL

PIPING THRU EXTERIOR WALL DETAILNO SCALE

1

2 BUILT-UP AHU COOLING COIL DRAINPAN DETAIL

4

NO SCALE

3

5

PIPE SUPPORT DETAIL6

CEILING TO CEILING TRANSFER DUCT DETAILNO SCALE

7

STRUT CLAMP HANGERS

OVERSIZE HANGER TO ALLOWLONGITUDINAL PIPE EXPANSION AND PIPEINSULATION TO PASS THROUGHUNBROKEN. (TYP.)

VERTICAL PIPE SUPPORT

RISER CLAMP

INSULATION

LUG, COUPLING, OR HUB

THREADED ROD

CLEVIS HANGER

INSULATION

INSULATION SHIELD

CLEVIS HANGER

PIPE INSULATION. (TYP.)

THREADED ROD. (TYP.)

UNI-STRUT OR EQUIVALENT

INSULATION SHIELD.(TYP.)

INSTALL CLAMP ON ALLPIPES LESS THAN 4"∅.

TRAPEZE HANGER

1. REFER TO SPECIFICATION SECTIONS 23 05 29 & 23 07 00.

NOTES:

HIGH DENSITY INSULATION INSERTOR FOR APPLICATIONS PERMITTED INSPECIFICATION, STEEL SADDLEFILLED WITH INSULATION. (TYP.)

HIGH DENSITY INSULATION INSERTOR FOR APPLICATIONS PERMITTEDIN SPECIFICATION, STEEL SADDLEFILLED WITH INSULATION. (TYP.)

INSULATION AND NEOPRENEMOUNTS FOR COLD PIPES.

180° SHIELD

SECTION ELEVATION

PROVIDE HANGER OF SIZE TO FIT PIPE COVERINGO.D. ALSO PROVIDE FOR LOWERING HANGER WHENPIPE COVERING IS APPLIED. (GRINNEL FIG.260SHOWN)

PIPE COVERING PROTECTOR (SHIELD) SHALL BE 18 GA.GALV. SHEET METAL. LENGTH SHALL BE 8" LONG FORPIPES 1-1/2" & SMALLER AND SHALL BE AT LEAST 12"LONG FOR PIPES 2" & LARGER.

360° VAPORBARRIER

INSULATION (±270°)

HIGH DENSITY INSULATIONINSERT (TYP)

HANGERROD

ADJUSTINGNUT

PIPE

COIL SUPPORTPIPE STAND ORCONC. CURBMIN. 12" HIGH

FLOOR2" DRAIN DN. TO EXISTING

MIN.

STAINLESS STEEL

BOTTOM COIL

ANGLES ANDBOLTS

6"

AIRFLOW

COIL

6"

AIRFLOW

(J.R. SMITH FIG. 1670)INSTALL AT THIRD POINTS

(2) CAST IRON SIDE OUTLETDRAINS W/O STRAINER

STAINLESS STEELPAN SUPPORT

CONTINUOUS STAINLESSSTEEL DRAIN PANS ATCOILS. APPLY MASTICAROUND BOLT HOLESBEFORE ASSEMBLY

(2) DEEP CUP DUO STRAINERW/O BASKET (JONES NO.STR200) INSTALL AT THIRDPOINTS ON DRAIN PANS.PITCH DRAIN PAN TO DRAINS

1 1/2" PIPE DRAINS6" 24"

MIN.

MIXING & STORAGETANK (55 US GALLONS)

1/2"NPT FLEXIBLESYSTEM CONNECTORHOSE WITH CHECKVALVE. (SEE CHILLEDWATER SCHEMATIC FORSYSTEM CONNECTIONPOINT).

GSF-1

REDUCER (TYP.)

VALVE (TYP.)BUTTERFLY

(TYP.)

AND BALANCE VALVE (TYP.)COMBINATION SHUT-OFF CHECK

EXISTING CONCRETE EQUIPMENT PAD (TYP.)

PUMP INLET AND SUCTION(TAP INTO PUMP DISCHARGE,PRESSURE GAUGE (TYP.)

(TYP.)

1/2" CAPPED DRAIN VALVE (TYP.)

1/4" BALL VALVE

WITH SUPPORT LEGSUCTION DIFFUSER

CONCENTRIC

DIFFUSER INLET)

END SUCTION PUMP

C B

C

B

A

A

A

A

PUMP PIPING DATAPIPE SIZES

PUMPNO. A B C

CWP-1

CWP-2 5"

5"

INCREASER (TYP.)

CONCENTRIC

CONNECTOR (TYP.)FLEXIBLE PIPE

END SUCTION PUMP

5"

5"

5"

5"

PIPE

GROUT

PIPE INSULATION

EXTERIOR WALL- CUTWALL AS NEATLY ASPOSSIBLE FOR SLEEVE

END OF ALUM.JACKET FLANGE

GALV. PIPE SLEEVE

FIBERGLASS INSULATION

PIPE INSULATION W/ALUM. JACKET

CAULK ALL AROUND TOMIN. 1" DEPTH W/

NON-HARDENING CAULK

UNIT DRAIN PAN

TRANSFERGRILLE

ACOUSTICALLYLINED DUCT

RANGE

CFM

SYMBOL NO.

TG

A TG-1 0-300

DUCT SIZE

HORIZONTAL

14/6



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

MECHANICALDETAILS

02/22/2019

218089.00

M501

R&D R&D


AIR SEPARATOR SCHEDULE (A.S.)LINE

TAG LOCATION SERVICE DESCRIPTION SIZE (IN.) GPM REMARKS

AS-1 PENTHOUSE CHILLED WATER SYSTEM 5" 376 COALESCING AIR & DIRT

GLYCOL SYSTEM FEEDER (G.S.F.)SYSTEM FLUID PUMP HEAD MOTOR CONTAINER SIZE

REMARKSTAG SERVED TYPE GPM (PSIG) H.P. (GALLONS)

GSF-1CHILLER GLYCOL 30% PRE-MIXED

1 50 0.7 AMPS 55 SEE NOTES BELOWLOOP PROPYLENE GLYCOL

(1) UNIT UTILIZES A 3-PRONG PLUG AND CORD.

(2) PROVIDE UNIT WITH ALARM PANEL.

EQUIPMENT ELECTRICAL SCHEDULEEQUIPMENT ELECTRICAL DATA MOTOR CONTROLLER DISCONNECT AT EQUIPMENT

REMARKSSYMBOL TYPE LOCATION V/PH HP KW FLA MCA MOP

EMERGENCY POWER

LOCATION TYPE DISCONNECTVFD

RESTARTFURN.

BYINST.BY ACCESSORIES TYPE

FURN.BY

INST.BYYES NO STANDBY

ACC-1 AIR COOLED CHILLER ROOF 460/3 - 192.9 - 342 A 450 A - X - INTEGRAL MAGNETIC - - MFR. MFR. - - - (OUTDOOR) (NF) MFR. MFR. SINGLE POINT UNIT POWER (SCR MIN. RATING 65kA)

CWP-1 CHILLED WATER SYSTEM DISTRIBUTION PUMP PENTHOUSE 460/3 20 - - - - - X NO PENTHOUSE VFD (NO BYPASS) YES - MC EC (HOA) (PL) - NOT REQUIRED MOUNT VFD IN LINE OF SIGHT OF EQUIP.

CWP-2 CHILLED WATER SYSTEM DISTRIBUTION PUMP PENTHOUSE 460/3 20 - - - - - X YES PENTHOUSE VFD (NO BYPASS) YES - MC EC (HOA) (PL) - NOT REQUIRED MOUNT VFD IN LINE OF SIGHT OF EQUIP.

-

GSF-1 GLYCOL SYSTEM FEEDER PENTHOUSE 120/1 0.7 AMPS - - - - - X - INTEGRAL MAGNETIC - - MFR. MFR. - - - SEE REMARKS UNIT UTILIZES A 3-PRONG PLUG AND CORD

TCP-1 TEMPERATURE CONTROL PANEL PENTHOUSE 120/1 20 AMP CIRCUIT - - - - - - - - - - - - - - - - -

TCP-2 TEMPERATURE CONTROL PANEL PENTHOUSE 120/1 20 AMP CIRCUIT - - - - - - - - - - - - - - - - -

ABBREVIATIONS: ACCESSORIES: DISCONNECT TYPE:

MC MECHANICAL CONTRACTOR FLA FULL LOAD AMPS VFD VARIABLE FREQUENCY (HOA) HAND-OFF-AUTO (OUTDOOR) WEATHER PROOF

EC ELECTRICAL CONTRACTOR MCA MIN. CIRCUIT AMPS DRIVE (PL) PILOT LIGHT (INDOOR) NON-WEATHER PROOF

MFR. MANUFACTURER MOP MAX. OVERCURRENT PROTECTION MCC MOTOR CONTROL (PB) PUSH BUTTON (F) FUSED

TCC TEMPERATURE CONTROL CENTER (NF) NON-FUSED

CONTRACTOR

WATER FILTER SCHEDULE (W.F.)

HOUSING FILTER CARTRIDGESFLOW PRESSURE INLET OUTLET PRESSURE DROP (FT.)

NO. LOCATION SERVES GPM DROP (FT.) SIZE (IN.) SIZE (IN.) QUANITY LENGTH (IN.) CLEAN DIRTY REMARKS

1 PENTHOUSE CHILLED WATER SYSTEM 34.0 5 2" 2" 6 20" 4.6 9.2 CARBON STEEL

WATER SAFETY RELIEF VALVE SCHEDULE (S.R.V.)

TAG LOCATION SERVESCAPACITY(BTU/HR.)

PRESS.SETTING

(PSIG)INLET

SIZE (IN)OUTLETSIZE (IN) REMARKS

SRV-1 PENTHOUSE C.W. SYSTEM 2,160,000 100 1" 1" BRONZE BODY CONSTRUCTION

AIR COOLED CHILLER SCHEDULE (A.C.C.)

NO.CAPACITY

(TONS) COMPRESSOR TYPEMINIMUM

UNLOADINGMAXEER IPLV

AMBIENTTEMP.

RANGE(°F) REFRIG

EVAPORATOR

REMARKSLOCATIONSYSTEMSERVES

DESIGNGPM MIN. GPM

EWT(°F)

LWT(°F)

WPD(FT. H

20) FLUID

1 ROOF 180 EXAC-1 ROTARY SCREW 15% 10.1 16.9 14°F-95°F R-513A 342 199 44 56 18.6 SEE NOTE NO. 2 BELOW SEE NOTE(S) # 1 & 3 BELOW

1. EQUIPMENT SHALL BE MOUNTED ON ROOF SUPPORT RAILS WITH HOUSED SPRING VIBRATION ISOLATION PER SPECIFICATION SECTION .

2. PROVIDE WITH 30% PROPYLENE GLYCOL.

3. PROVIDE WITH HAIL GUARDS.

A.H. UNIT COOLING COIL SCHEDULE - WATER (C.C.)

NO. SERVES TOTAL CFM MIN. O.A. CFM

EAT (°F) LAT (°F)MAX.APD(IN

W.C.)

CAP.TOTAL(MBH)

CAP.SENS(MBH)

FLUID SIZE (IN.)

FACEVELOCITY

(FPM)

NO.OF

ROWS

NO.OF

COILSMAX.FPF FLUID TYPE REMARKSDB WB DB WB GPM

EWT(°F)

LWT(°F)

MAX.WPD.

(FT. H 2O) HEIGHT LENGTH

CC-1 EXAC-1 11,250 3,628 80.9 69.2 54.8 54.7 0.7" 516 324 79.8 42 56 13.1 33 120 409 6 4 148 30% P.G. SEE NOTE# 1 BELOW

1) CAPACITY REFLECTED IS PER COIL. (TYPICAL OF FOUR TOTAL COILS).

CHILLED WATER STORAGE TANK (C.W.S.T.)MOUNTING SIZE ASME OPERATING DIMENSIONS

TAG SERVES TYPE CONFIG. LINING GALLONS STAMPED TEMP. SUPPORT DIAM. HEIGHT BASE HT.

CWST-1 CHILLED WATER SYSTEM CARBON STEEL VERTICAL - 850 125 PSIG 56 °F RING 42" 90" 6"

NOTES:

1. SEE SPEC FOR ADDITIONAL REQUIREMENTS.

2. FIELD INSULATE PER SPEC.

PUMP SCHEDULE

NO. SERVICE

FLUID PUMP MOTOR SPEED CONTROL

REMARKSTEMP(°F) TYPE GPM MIN. GPM

HEAD(FT)

NPSHAVAIL.

MIN.EFF. TYPE RPM HP TYPE

CWP-1 CHILLED WATER SYSTEM 42 30% P.G. 376 150 100 6' 75% BASE MOUNT 1800 20 VFD END SUCTION

CWP-2 CHILLED WATER SYSTEM 42 30% P.G. 376 150 100 6' 75% BASE MOUNT 1800 20 VFD END SUCTION

NOTES:

1 OPERATING POINTS FOR ALL PUMPS SHALL MEET HYDRAULIC INSTITUTE STANDARDS FOR PREFERRED OPERATING RANGE.

2 PERFORMACE CURVES SHALL MEET HI 15.6 / ISO 9906 ACCEPTANCE CRITERA.

A.H. UNIT PRE-HEATING COIL SCHEDULE - STEAM (H.C.)

NO. CFMEAT(°F)

LAT(°F)

MAX.APD (1)

CAP.(MBH)

STEAMFACE

VELOCITY(FPM)

NO.OF

ROWS COIL TYPEMAX.FPF REMARKS

PRESS.(#)

CAPACITY(EDR) COIL SIZE (WxH)

HC-1 7,255 -10 37.8 0.1 367 2 1,529 60" x 30" 566 1 STEAM 53 SEE NOTES BELOW

(1) MIN. OA PREHEAT. CAPACITY REFLECTED IS PER COIL. (TYPICAL OF TWO TOTAL COILS).

(2) MAXIMUM APD IS BASED ON TOTAL CFM.

HVAC EQUIPMENT BALANCING DATA SCHEDULE

UNIT NO. UNIT MODELORIGINAL DESIGN PERFORMANCE

NEW CONDITIONS REMARKS

EXSAF-1 SERVING EXAC-1 BUFFALO MODEL: 890 BLH55,000 TOTAL CFM, 17,300 MIN. O.A. CFM,

7" SP, RPM 960, 75 HP @ 440/345,000 TOTAL CFM, 14,510 MIN. O.A.CFM, 4.7"

SP, 785 RPM, 41.1 HP @ 440/3SEE NOTES # 1 & 2 BELOW.

EXRF-1 SERVING EXAC-1 BUFFALO MODEL: 6037,700 TOTAL CFM, 3/4" SP, 505 RPM, 10

HP @ 440/330,490 TOTAL CFM, 1/2" SP, 408 RPM, 5.3 HP

@ 440/3SEE NOTES # 1 & 2 BELOW.

(1) REBALANCE EXISTING FANS TO REVISED CRITERA LISTED WITHIN THIS SCHEDULE. PROVIDE NEW BELTS AND SHEAVES AS REQUIRED.

(2) NEW OPERATING CONDITIONS (TSP, RPM, HP) ARE ESTIMATES BASED OFF FAN LAW CALCULATIONS. BALANCER SHALL CONFIRM AND VERIFY ASSUMPTIONS.

EXPANSION TANK SCHEDULE (E.T.)

TANK ACCEPT. VERT. PIPE

SYSTEM TANK CAPACITY CAPACITY TANK CONN. FLOOR FLUID

NO. SERVED TYPE (GAL.) (GAL.) DIA. HEIGHT SIZE SUPPORT TYPE REMARKS

ET-1 CHILLED WATER COOLING SYSTEM BLADDER 28.50 18.75 16" 35" 1" STEEL SKIRT 30% P.G. SEE NOTE #1 BELOW

1). MOUNT TANK ON CONCRETE HOUSEKEEPING PAD.

FILTER SCHEDULE (F.)

NO. SERVICE CFM EFF.

INIT.APD (IN.

W.C.)

FINALAPD. (IN.

W.C.)

CELL CELL

VELOCITY

FILTER FRAME

REMARKSNO. SIZE QTY. NO. SIZE QTY. TYPE TYPE

1 EXAC-1 (MIN. O.A. PRE-HEAT FILTERS) 7,255 30% 0.2" 1" 1 16"Hx20"Wx2"D 3 2 16"Hx20"Wx2"D 3 550 2" PLEAT BUILT UP FRAME SEE NOTES BELOW

2 EXAC-1 (MIN. O.A. PRE-HEAT FILTERS) 7,255 30% 0.2" 1" 1 16"Hx20"Wx2"D 3 2 16"Hx20"Wx2"D 3 550 2" PLEAT BUILT UP FRAME SEE NOTES BELOW

1.) FILTER SIZES AND QUANTITIES LISTED IN ABOVE SCHEDULE ARE ASSUMPTIONS BASED OFF EXISTING 1964 DRAWINGS.

2.) M.C. SHALL PROVIDE NEW BUILT- FILTER FRAME TO MATCH EXISTING FRAME BEING REMOVED.

3.) M.C. SHALL VERIFY EXACT SIZE OF FILTER FRAME AND CONFIRM FILTER SIZES AND QUANTITY ASSUMPTIONS.

GRILLE SCHEDULE

NO. TYPECFM

RANGE

SIZE (IN.)

DIFF.MAX.NC OPTIONS MAT'L FINISH FRAME DAMPER

MOUNTINGHEIGHT REMARKSSQ. ROUND

TG-1 EGGCRATE 0-300 14/14 - N/A 30 - ALUM. W L - CEILING 24"x24" FACE W/ 45 ° ANGLED CORE

EG-1 EGGCRATE 0-300 14/14 - N/A 30 - ALUM. W L - CEILING 24"x24" FACE W/ 45 ° ANGLED CORE

OPTIONS:

1- OPPOSED BLADE DAMPER 5- EQUALIZING GRID

2- BUTTERFLY DAMPER 6- RADIAL

3- FIRE DAMPER 7- FILTER

4- COMBINATION DAMPER 8- WHITE BLANK-OFF PANEL FOR LAY-IN CEILING

ABBREVIATIONS: FRAME:

A- ANODIZED C- CHANNEL

ALUM.- ALUMINUM F- FLANGE

E- ENAMEL/EPOXY L- LAY-IN

EG- EXHAUST GRILLE SI- SNAP-IN

PERF.- PERFORATED GRILLE T- TEGULAR

RG- RETURN GRILLE

SG- SUPPLY GRILLE

SP- SATIN POLISH

S.S.- STAINLESS STEEL

STL.- STEEL

TG- TRANSFER GRILLE

W- WHITE

(1) CUSTOM COLOR AS SELECTED BY ARCHITECT.

SOUND POWER LEVEL SCHEDULE (MAXIMUM ALLOWABLE)

SOUND POWER BY OCTAVE BAND RE 10 - 12 WATTS

COMPONENT 63 HZ 125HZ 250ZH 500HZ 1000HZ 2000HZ 4000HZ 8000HZ

AC-1 AIR COOLED CHILLER @ 100% LOAD 100 88 89 96 99 95 84 76



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

MECHANICALSCHEDULES

02/22/2019

218089.00

M600

R&D R&D


SYMBOLS:(ALL SYMBOLS SHOWN MAY NOT APPEAR ON DRAWINGS)

LIGHTING FIXTURE - CEILING MOUNTED, RECESSED, SURFACE,SUSPENDED

LIGHTING FIXTURE - WALL MOUNTED

INDUSTRIAL LIGHT

LIGHTING FIXTURE - CEILING SURFACE, SUSPENDED, BOLLARD

LIGHTING FIXTURE - WALL SURFACE

LIGHTING FIXTURE - CEILING RECESSED

LIGHTING FIXTURE - WALL RECESS

EMERGENCY BATTERY UNIT

CEILING MOUNTED EMERGENCY BATTERY UNIT

REMOTE HEAD

EXIT LIGHT - CEILING MOUNTED

EXIT LIGHT - WALL MOUNTED

SINGLE POLE SWITCH - TOGGLE TYPEK a

SWITCH DESIGNATION

SWITCH TYPE(2) DOUBLE POLE(3) 3 WAY(4) 4 WAY(K) KEY OPERATED(P) WITH PILOT LIGHT INDICATION(T) TIMER SWITCH

INDICATES DUAL LEVEL SWITCHING - SEE DUAL LEVEL SWITCHING DETAILDLS

SINGLE POLE TOGGLE SWITCH WITH DUPLEX RECEPTACLE COMBINATION

INDICATES OUTLET CONFIGURATION. SEE THETELECOMMUNICATIONS HORIZONTAL CABLING SCHEDULE FOR ADDITIONAL INFORMATION.

TELECOMMUNICATIONS OUTLETMOUNTED ABOVE COUNTER BACKSPLASH

INDICATES OUTLET MOUNTING HEIGHT.(CLG) MOUNTED IN OR ABOVE CEILING(F) MOUNTED IN FLOOR BOX

SHOWN ON POWER PLAN(M) MOUNTED IN MULTI-OUTLET ASSEMBLY

SHOWN ON POWER PLAN(P) MOUNTED IN POKE-THRU

SHOWN ON POWER PLAN(S) SPECIAL MOUNTING HEIGHT EITHER INDICATED

ON THE DRAWINGS OR AS INDICATED IN THEASSOCIATED ARCHITECTURAL ELEVATIONS.

(TP) MOUNTED IN TELEPOWER POLESHOWN ON POWER PLAN

(T) MOUNTED IN AV/TELEVISION BOXSHOWN ON POWER PLAN

X

X

SYSTEM EQUIPMENT CABINET

DENOTES THE FOLLOWING:(DB) DOOR BELL(CA) CABLE TELEVISION(CB) CODE BUTTON(CC) CLOSED CIRCUIT TELEVISION(CLK) CLOCK SYSTEM(DV) DIGITAL TELEVISION(FA) FIRE ALARM(HP) HOUSE PAGING(IC) INTERCOM(IS) INFANT SECURITY(LM) LOCAL MUSIC(LP) LOCAL PAGING(MA) MASTER ANTENNAE TELEVISION(MS) MUSIC SYSTEM(NC) NURSE CALL(P1) PROCEDURE ROOM - TWO WAY COMMUNICATION(P2) PROCEDURE ROOM - MUSIC SYSTEM(PA) PUBLIC ADDRESS(SA) SECURITY ACCESS(SC) SYSTEM CLOCK(TC) TELECOMMUNICATIONS(TV) TELEVISION(RA) RESCUE ASSISTANCE(VD) VOICE DATA(WR) WIRED RADIO

DENOTES THE FOLLOWING:(AN) ANNUCIATOR(BB) BACKBOARD(CP) CONTROL PANEL(ER) EQUIPMENT RACK(TC) TERMINAL CABINET(WF) WALL FIELD

FXX/X

FIRE ALARM

DENOTES THE FOLLOWING:(C) CEILING MOUNTED(ALL DEVICES SHALL BE WALL MOUNTED UNLESS NOTEDOTHERWISE BELOW OR ON PLANS)

DENOTES THE FOLLOWING:(CMX) CONTROL MODULE - SEE CONTROL MODULE SCHEDULE

(X - DENOTES SPECIFIC UNIT)(CO) CHIME ONLY(COD) CARBON MONOXIDE DETECTOR(CV1) CHIME W/ 15 CANDELA STROBE(CV2) CHIME W/ 30 CANDELA STROBE(CV3) CHIME W/ 75 CANDELA STROBE(CV4) CHIME W/ 110 CANDELA STROBE(DH) DOOR HOLDER(DI) IONIZATION SMOKE DETECTOR (DUCT)(DP) PHOTOELECTRIC SMOKE DETECTOR (DUCT)(HC) HEAT/COMBINATION (RATE OF RISE/FIXED) (CEILING)(HF) HEAT DETECTOR (FIXED) (CEILING)(HO) HORN ONLY(HR) HEAT DETECTOR (RATE OF RISE) (CEILING)(HV1) HORN W/ 15 CANDELA STROBE(HV2) HORN W/ 30 CANDELA STROBE(HV3) HORN W/ 75 CANDELA STROBE(HV4) HORN W/ 110 CANDELA STROBE(MMX) MONITOR MODULE - SEE MONITOR MODULE SCHEDULE

(X - DENOTES SPECIFIC UNIT)(PS) PULL STATION(RE) RE-ENTRANT HORN(SI) IONIZATION SMOKE DETECTOR (CEILING)(SO) SPEAKER ONLY(SP) PHOTOELECTRIC SMOKE DETECTOR (CEILING)(SV1) SPEAKER W/ 15 CANDELA STROBE(SV2) SPEAKER W/ 30 CANDELA STROBE(SV3) SPEAKER W/ 75 CANDELA STROBE(SV4) SPEAKER W/ 110 CANDELA STROBE(VO) VISUAL UNIT ONLY(VO1) VISUAL UNIT ONLY, 15 CANDELA STROBE(VO2) VISUAL UNIT ONLY, 30 CANDELA STROBE(V03) VISUAL UNIT ONLY, 75 CANDELA STROBE(VO4) VISUAL UNIT ONLY, 110 CANDELA STROBE

SXX

SECURITY, ACCESS CONTROL AND DOOR MONITORING

DENOTES THE FOLLOWING:(CR) CARD READER(CXX) CLOSED CIRCUIT CAMERA - SEE CAMERA SCHEDULE

(XX - DENOTES SPECIFIC UNIT)(DB) DURESS BUTTON(DC) DOOR CONTACT(DP) DOOR POSITION INDICATOR SWITCH(EL) ELECTRONIC LATCH/LOCK(ES) ELECTRIC STRIKE(GB) GLASS BREAK DETECTOR(KE) KEYLESS ENTRY(KP) KEYPAD - SECURITY SYSTEM(KS) KEYED SWITCH(LM) LATCHBOLT MONITOR(MD) MOTION SENSOR - DUAL TECHNOLOGY(MI) MOTION SENSOR - INFRARED(ML) MAGNETIC LOCK(MO) CLOSED CIRCUIT TELEVISION MONITOR(MU) MOTION SENSOR - ULTRASONIC(RC) CLOSED CIRCUIT TELEVISION REMOTE CAMERA CONTROLS(RM) REQUEST FOR EXIT - MOTION(RP) REQUEST FOR EXIT - PUSH BUTTON(VC) VIDEO RECORDER

ELECTRICAL CIRCUITING:

LIGHTING FIXTURES:

A1a,X-3b

AX-3b,1a

A1a,3b

AX-3*

INDICATES FIXTURE TYPE (TYPICAL)

.

SECOND DESIGNATOR (TYPICAL)

FIRST DESIGNATOR (TYPICAL)SINGLE DESIGNATOR (TYPICAL)

1. FIRST DESIGNATOR INDICATES THE CIRCUIT AND CONTROL MEANS ASSOCIATED WITH THEOUTBOARD LAMPS.

2. SECOND DESIGNATOR INDICATES THE CIRCUIT AND CONTROL MEANS ASSOCIATED WITH THEINBOARD LAMPS.

3. SINGLE DESIGNATOR INDICATES THE CIRCUIT AND MEANS OF CONTROL FOR THE ENTIREFIXTURE.

4. DESIGNATOR SHOWN WITHIN ( ) INDICATES CIRCUITING AND/OR CONTROL VIA ANEMERGENCY LIGHTING CONTROL UNIT. REFER TO LIGHTING DETAILS FOR WIRING DIAGRAM(S).

5. SHADING INDICATES LAMP(S) SERVED FROM EMERGENCY, CRITICAL CARE OR LIFE SAFETYBRANCH (TYPICAL).

LIGHTING CIRCUITING NOTES -

DESIGNATOR DESCRIPTION:

X-3b LOWER CASE LETTERS INDICATE SWITCH DESIGNATION CONTROLLING ASSOCIATED LAMP(S). ABSENCE OF ANY LETTER INDICATES FIXTURE/LAMP(S) CONTROLLED VIA SWITCH(ES) IN THE ASSOCIATED ROOM. UPPERCASE "U" INDICATES ASSOCIATED LAMP(S) ARE UNSWITCHED.

INDICATES THE CIRCUIT NUMBER SERVING FIXTURE/LAMP(S).

INDICATES BRANCH PANELBOARD SERVING THE DEVICE. SEE PLAN FOR AREAS SERVED BY PANELBOARD(S).

ELECTRICAL DEVICES:

X-3

DESIGNATOR

XXX-3

.

SPECIAL OUTLETDESIGNATOR

DESIGNATOR DESCRIPTION:

X-3

INDICATES THE CIRCUIT NUMBER SERVING DEVICE.

INDICATES BRANCH PANELBOARD SERVING THE DEVICE. SEE PLAN FORAREAS SERVED BY PANELBOARD(S).

OFFICE - 277 & 120 VOLTS

NH - NORMAL BRANCH - 277 VOLTSNL - NORMAL BRANCH - 120 VOLTSQH - EQUIPMENT BRANCH - 277 VOLTSQL - EQUIPMENT BRANCH - 120 VOLTSEH - EMERGENCY BRANCH - 277 VOLTSEL - EMERGENCY BRANCH - 120 VOLTS

GENERAL NOTES - NOTES THAT APPLY TO ALL DRAWINGS WITHIN THE DRAWING SET.SHEET NOTES - NOTES THAT APPLY TO THE SHEET ON WHICH THEY APPEAR.KEYED NOTES - NOTES THAT APPLY TO AN AREA, ITEM AND/OR DEVICE ON A FLOOR PLAN OR DETAIL.DETAIL NOTES - NOTES THAT APPLY TO A SPECIFIC DETAIL.

NOTE DESCRIPTIONS -

ABBREVIATIONS:

(ALL ABBREVIATIONS SHOWN MAY NOT APPEAR ON DRAWINGS)

ABV ABOVEAFF ABOVE FINISHED FLOORAFG ABOVE FINAL GRADEALT ALTERNATEALT SW ALTERNATE SWITCHARCH ARCHITECTBFC BELOW FINISHED CEILINGBFG BELOW FINISHED GRADEBLDG BUILDINGBOL BUILT IN OVERLOADBPC BOLTED PRESSURE CONTACT SWITCHBRKR BREAKERCB CIRCUIT BREAKERCKT CIRCUITCLG CEILINGCP CONTROL PANELCS COMBINATION STARTERDE DUAL ELEMENT FUSESDIR DIRECTDISC DISCONNECTDN DOWNEC ELECTRICAL CONTRACTORELEV ELEVATIONEMER EMERGENCYEMT ELECTRIC METALLIC TUBINGEOL END OF LINE RESISTOREP EXPLOSION PROOFER EXISTING REMOVE FROM SERVICEERL EXISTING RELOCATEDES EXPOSED STRUCTUREETR EXISTING TO REMAINEX EXISTINGEWC ELECTRIC WATER COOLERF FLUSHFBO FURNISHED BY OTHERSFDR FEEDERFIXT FIXTUREFLUOR FLUORESCENTFLR FLOORFS FLOW SWITCHFVNR FULL VOLTAGE NON-REVERSINGGC GENERAL CONTRACTORGFI GROUND FAULT INTERRUPTEDGRC GALVANIZED RIGID CONDUITGRD GROUNDGRDG GROUNDINGGYP GYPSUM BOARDHOA HAND-OFF-AUTO SWITCHHVAC HEATING, VENTILATING, & AIR CONDITIONINGHW HEAVYWALLIL INTERLOCKIMC INTERMEDIATE METALLIC CONDUITJB JUNCTION BOXkVA KILO VOLTAMPERELG LAY-IN GRIDLTG LIGHTINGLV LOW VOLTAGELVT LINE VOLTAGE THERMOSTATMAG MAGNETIC STARTERMAN MANUAL STARTERMC MECHANICAL CONTRACTORMCB MAIN CIRCUIT BREAKERMCC MOTOR CONTROL CENTERMDP MAIN DISTRIBUTION PANELMLO MAIN LUGS ONLYMSB MAIN SWITCHBOARDMTD MOUNTEDNIC NOT IN CONTRACTNU NEAR UNITOU ON UNITP POLEPB PUSH BUTTONPEND PENDANTPC PLUMBING CONTRACTORPE SW PNEUMATIC SWITCHPLBG PLUMBINGPNL PANELPVC POLYVINYL CHLORIDER RELAYRAI REMAIN AS ISRE/CKT RECONNECT TO EXISTING CIRCUITRECEPT RECEPTACLERM ROOMRVS REDUCED VOLTAGE STARTINGS SPLINESEL SW SELECTOR SWITCHSP SW SPEED SWITCHSURF SURFACESW SWITCHTC TIME CLOCKTCC TEMPERATURE CONTROL CONTRACTORTCP TEMPERATURE CONTROL PANELTYP TYPICALUG UNDERGROUNDUNIV UNIVERSALUSS UNIT SUBSTATIONWP WEATHERPROOFXFMR TRANSFORMER

OS OCCUPANCY SENSOR - SHOWN WITHIN A SPACE ARE TO CONTROL ALL THE LIGHTING WITHIN THAT SPACE, INCLUDINGBUT NOT LIMITED TO GENERAL AMBIENT LIGHTING ANDUNDERCABINET TASK LIGHTING

X/X,a

SWITCH DESIGNATION

DUPLEX RECEPTACLE(DD) DOUBLE DUPLEX(GFI) GROUND FAULT INTERRUPTING(IG) ISOLATED GROUND(SH) SWITCHED TOP HALF(TD) TRIPLE DUPLEX(TR) TAMPER RESISTANCE(USB) DUPLEX RECEPTACLE WITH USB CHARGING(WP) WEATHERPROOF W/ GFI RECEPTACLE

DUPLEX RECEPTACLE - MOUNTED ABOVE COUNTER BACKSPLASH

DUPLEX RECEPTACLE - MOUNTED AT SPECIAL MOUNTING HEIGHT INDICATED ON DRAWING OR AS INDICATED IN THE ASSOCIATEDARCHITECTURAL ELEVATION.

46"

INDICATES MOUNTING HEIGHT WHEN SHOWN.

EQUIPMENT CONNECTION: SPECIAL PURPOSE RECEPTACLE ORMOTOR CONNECTION - SEE EQUIPMENT SCHEDULE

DISCONNECT SWITCH

MOTOR STARTER - SEE EQUIPMENT SCHEDULE

T

1TRANSFORMER

JUNCTION BOX

M METER SOCKET

1

A

DISTRIBUTION PANEL - SEE PANEL SCHEDULE

INDICATES DESIGNATION

SEE DETAIL SYMBOL

INDICATES DETAIL DESIGNATION

INDICATES SHEET NUMBER

KEYED NOTE SYMBOL

DENOTES THE FOLLOWING:(HV) HVAC INTERFACE

AX-3* (X-*)

EMERGENCY LIGHTINGCONTROL DESIGNATOR (TYPICAL)

SIMPLEX RECEPTACLE

PUSH BUTTON SWITCH

"X" DENOTES SPECIFIC TYPE - SEE SPECIFICATIONS

XX,#X TELECOMMUNICATIONS OUTLET

TELECOMMUNICATIONS OUTLETMOUNTED WITHIN ENCLOSURE

# INDICATES OUTLET JACK AND CABLE QUANTITY

XX,#X WALL PHONE OUTLETSEE TELECOMMUNICATIONS HORIZONTAL CABLING SCHEDULE FOR ADDITIONAL INFORMATION.

DETAIL NOTES -

KEYED NOTES -

NORMAL OR CRITICAL POWER

DLS

1.

OCCUPANCYSENSORPOWER PACK

OCCUPANCY SENSORS

AS INDICATED ON PLANS

1.

2.

3.

. .

1

OS

OS

OS

S S

S

MOUNT IN JUNCTION BOX ABOVE ACCESSIBLE CEILING.

DETAIL INDICATES A TYPICAL OCCUPANCY SENSOR WIRING DIAGRAM. SEE FLOOR PLANS FOR THE REQUIRED LIGHTING CONTROL CONFIGURATION. PROVIDE THE NECESSARY CONTROL COMPONENTS AND WIRING FOR A COMPLETE SYSTEM.

SEE FLOOR PLANS FOR QUANTITIES, TYPES AND LOCATIONS OF OCCUPANCY SENSORS.

ALL FIXTURES LOCATED IN THE ROOM MONITORED BYOCCUPANCY SENSORS SHALL BE CONTROLLED BY THESE SENSORS.



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

SYMBOLS,

ABBREVIATIONS

& SHEET INDEX

02/22/2019

218089.00

E000

R&D R&D

ELECTRICAL SHEET INDEX

No. TITLEE000 SYMBOLS, ABBREVIATIONS & SHEET INDEX

E100 OVERALL SECOND FLOOR PLAN - ELECTRICAL

E200 PENTHOUSE - ELECTRICAL

E210 PARTIAL BASEMENT AND SECOND FLOOR - ELECTRICAL

E400 ONE LINE DIAGRAM

E600 ELECTRICAL SCHEDULES

NOT TO SCALE1

TYPICAL CEILING MOUNTED, SINGLECIRCUIT OCCUPANCY SENSOR DETAIL


UP

1

1a

2

3


1

1a

3


24

LCP2

LP2 2A

ETR

ETR

ETR

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

PROJECT TITLE



PROJECT 2019

OVERALL

SECOND FLOOR

PLAN -

ELECTRICAL

02/22/2019

218089.00

E100

R&D R&D

1/8" = 1'-0"E100

1 OVERALL SECOND FLOOR PLAN - ELECTRICAL


F

F

F

F

2

D E F G H

2

D E F G HD E F G H

EVAPORATORCOND. FAN

REFR.COMP #2

REFR.COMP #1

EVAP. COND.PUMP

EVAPORATORCOND. FAN

2

D E F G H

Space

1

ELECTRICAL

EQUIPMENT ROOM

-

PENTHOUSE

-

STAIRS

-

ACC-1

CWP-1 CWP-2

TCP-1 TCP-2

PHPD

ETR

PHPP

ETR

GSF-1

DP

DP

CM

1

DP

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

PROJECT TITLE



PROJECT 2019

PENTHOUSE -ELECTRICAL

02/22/2019

218089.00

E200

R&D R&D

1/4" = 1'-0"1PENTHOUSE - DEMOLITION

1.

2.

3.

4.

5.

6.

7.

8.

9.

DEMOLITION PLAN NOTES -

ALL INFORMATION SHOWN ON THE PLANS WAS GATHERED FROM FIELD OBSERVATION AND EXISTING DRAWINGS. EC SHALL FIELD VERIFY EXISTING CONDITIONS AND IS RESPONSIBLE FOR ANY ADDITIONAL TRACING, REMOVING, RELOCATION AND EXTENDING CIRCUITS AND DEVICES NECESSARY TO MAINTAIN CONTINUITY OF EXISTING EQUIPMENT NOT IN THE AREA OF WORK. EC SHALL FIELD VERIFY EXACT DEMOLITION REQUIREMENTS AND INCLUDE ALL ASSOCIATED COSTS. ALL ABANDONED WIRING, CONDUITS, FITTINGS, BOXES, SUPPORTS, ETC. SHALL BE REMOVED FROM THE DEVICES BACK TO THE RESPECTIVE SOURCE PANEL. UPDATE PANEL DIRECTORIES. REFER TO THE SPECIFICATIONS FOR ADDITIONAL ELECTRICAL DEMOLITION REQUIREMENTS.

ALL ELECTRICAL EQUIPMENT SHOWN ON THE DEMOLITION PLANS ARE "EXISTING TO BE REMOVED" UNLESS OTHERWISE NOTED. IN ADDITION TO REMOVING DEVICES, REMOVE ALL ASSOCIATED ELECTRICAL CIRCUITS BACK TO SOURCE. REFER TO THE SPECIFICATIONS FOR ELECTRICAL DEMOTION REQUIREMENTS.

EC SHALL SUPPORT AND PROTECT ELECTRICAL EQUIPMENT EXISTING TO REMAIN, INCLUDING BUT NOT LIMITED TO CONDUITS, WIRING, DEVICES, AND FIXTURES AS REQUIRED.

DASHED WALLS ON THE DEMOLITION PLANS INDICATE IN GENERAL EXISTING WALLS BEING DEMOLISHED. DO NOT RELY ON ELECTRICAL DRAWINGS TO DETERMINE EXTENT OF GENERAL CONSTRUCTION DEMOLITION. REFER TO ARCHITECTURAL DEMOLITION PLANS FOR THE EXACT EXTENT OF GENERAL CONSTRUCTION DEMOLITION REQUIRED BY THIS CONTRACT.

REFER TO DEMOLITION DRAWINGS OF OTHER TRADES. WHERE MOTORS, CONTROL PANELS, AND OTHER LOADS THAT HAVE AN ELECTRICAL CONNECTION ARE BEING REMOVED, INCLUDE THE DISCONNECTION AND REMOVAL OF ASSOCIATED ELECTRICAL FEEDS, CIRCUITS, AND LOOSE CONTROL EQUIPMENT IN THIS CONTRACT.

EXISTING TO REMAIN "ETR" ON THIS DEMOLITION PLANS REFERS TO THE STATUS OF BASIC ELECTRICAL DEVICES. THERE MAY BE SOME WORK REQUIRED IN THESE SPACES INVOLVING BACK-FEEDING EXISTING CIRCUITS OR OTHER MODIFICATIONS. SEE ALL DOCUMENTS THAT MAKE UP THIS CONTRACT FOR THE TOTAL EXTENT OF WORK REQUIRED IN ALL SPACES.

EC SHALL COORDINATE REMOVAL AND REPLACEMENT OF ANY ELECTRICAL CEILING DEVICES (I.E. LIGHT FIXTURES, FIRE ALARM, ETC.) OUTSIDE THE AREA OF WORK TO ACCOMMODATE THE NEW CONSTRUCTION.

EXISTING DEVICES MAY BE REUSED, IN-LIEU OF PROVIDING NEW DEVICES SHOWN ON ELECTRICAL DRAWINGS IN THIS SET, PROVIDED THE DEVICES ARE CLEAN, IN WORKING CONDITION AND ACCEPTABLE TO BE REUSED PER THE OWNER.

ELECTRICAL CONTRACTOR SHALL REFER TO THE ARCHITECTURAL PLANS FOR LOCATIONS OF SMOKE PARTITIONS AND FIRE RATED WALLS, FLOORS, AND CEILINGS AND THEIR HOURLY RATINGS. ELECTRICAL CONTRACTOR SHALL PROVIDE FIRE STOPPING FOR ALL CONDUIT AND OTHER PENETRATIONS COVERED UNDER DIVISION 26 IN THESE SURFACES. FIRESTOPPING SHALL MEET OR EXCEED THE RATING OF THE SURFACE BEING PENETRATED.

1.

2.

PENTHOUSE POWER NOTES -

CIRCUIT NUMBERS INDICATED DO NOT REFLECT THE ACTUAL POSITION OF THE CIRCUIT BREAKERS IN THE PANEL; RATHER, THE NUMBERS INDICATE WHICH DEVICES ARE CONNECTED TO A COMMON CIRCUIT. E.C. SHALL UTILIZE SPARES, SPACES AND CIRCUITS RELIEVED FROM DUTY TO PROVIDE THE INDICATED NUMBERS OF CIRCUITS.

EXISTING TO REMAIN, "ETR", ON THIS PLAN REFERS TO THE STATUS OF BASIC ELECTRICAL DEVICES. THERE MAY BE SOME WORK REQUIRED IN THESE SPACES INVOLVING BACK-FEEDING EXISTING CIRCUITS OR OTHER MODIFICATIONS. SEE ALL DOCUMENTS THAT MAKE UP THIS CONTRACT FOR THE TOTAL EXTENT OF WORK REQUIRED IN ALL SPACES.

1/4" = 1'-0"2PENTHOUSE - POWER

KEYED NOTES -

1. CONTROL MODULE INITIATES UNIT SHUT DOWNPROCEDURES UPON ALARM SIGNAL FROM ANY DUCT UNIT,SHAFT DUCT OR AREA SMOKE DETECTOR. SEESPECIFICATION 28 31 06 FOR ADDITIONAL INFORMATION.


FF

OS

OS

F

F

F

VESTIBULE


VESTIBULE


2

3

K

2

2

3

K

3

K

46''GFI

46''GFI

1

1

3

XH

AA

AA AA

AA

AA

AA

AA

B

B

4

5

a

1

SV1

SV1

SV1

2

3

J

WH-1

CP-1

S

ETR

6

6

2

3

J

CIRC.PUMP

WATERHEATER

NORTH



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

KEY PLAN

PROJECT TITLE



PROJECT 2019

PARTIAL

BASEMENT AND

SECOND FLOOR

- ELECTRICAL

02/22/2019

218089.00

E210

R&D R&D

1/4" = 1'-0"1PARTIAL SECOND FLOOR PLAN - DEMOLITION

1/4" = 1'-0"2PARTIAL SECOND FLOOR PLAN - ELECTRICAL

1/4" = 1'-0"3PARTIAL BASEMENT PLAN - ELECTRICAL

1/4" = 1'-0"4PARTIAL BASEMENT PLAN - DEMOLITION

KEYED NOTES -

1.

2.

3.

4.

5.

6.

EC SHALL REUSE EXISTING CIRCUIT RELIEVED FROM DEMOLITION OF EXISTING BATHROOMS TO FEED NEW LIGHTING AND RECEPTACLES.

THE CEILING IN THIS ROOM HAS PREVIOUSLY BEEN DEMOLISHED.

EXTEND THE EXISTING CIRCUIT CURRENTLY SERVING EXIT LIGHTING ON THIS FLOOR.

EXTEND EXISTING SECOND FLOOR NORMAL CORRIDOR LIGHTING CIRCUIT WIRE THROUGH MOMENTARY SWITCH ''a'' AND LIGHTING CONTROL PANEL LCP2. SEE SHEET E100 FOR PANEL LOCATION.

EXTEND EXISTING SECOND FLOOR EMERGENCY CORRIDOR LIGHTING CIRCUIT LIGHT FIXTURE SHALL BE UNSWITCHED.

EC SHALL REUSE EXISTING CIRCUIT RELIEVED FROM DEMOLITION OF EXISTING EQUPMENT. EQUIPMENT WAS FED FROM EXISTING PANEL ''S''.

1.

2.

3.

4.

5.

6.

7.

8.

9.

DEMOLITION PLAN NOTES -

ALL INFORMATION SHOWN ON THE PLANS WAS GATHERED FROM FIELD OBSERVATION AND EXISTING DRAWINGS. EC SHALL FIELD VERIFY EXISTING CONDITIONS AND IS RESPONSIBLE FOR ANY ADDITIONAL TRACING, REMOVING, RELOCATION AND EXTENDING CIRCUITS AND DEVICES NECESSARY TO MAINTAIN CONTINUITY OF EXISTING EQUIPMENT NOT IN THE AREA OF WORK. EC SHALL FIELD VERIFY EXACT DEMOLITION REQUIREMENTS AND INCLUDE ALL ASSOCIATED COSTS. ALL ABANDONED WIRING, CONDUITS, FITTINGS, BOXES, SUPPORTS, ETC. SHALL BE REMOVED FROM THE DEVICES BACK TO THE RESPECTIVE SOURCE PANEL. UPDATE PANEL DIRECTORIES. REFER TO THE SPECIFICATIONS FOR ADDITIONAL ELECTRICAL DEMOLITION REQUIREMENTS.

ALL ELECTRICAL EQUIPMENT SHOWN ON THE DEMOLITION PLANS ARE "EXISTING TO BE REMOVED" UNLESS OTHERWISE NOTED. IN ADDITION TO REMOVING DEVICES, REMOVE ALL ASSOCIATED ELECTRICAL CIRCUITS BACK TO SOURCE. REFER TO THE SPECIFICATIONS FOR ELECTRICAL DEMOTION REQUIREMENTS.

EC SHALL SUPPORT AND PROTECT ELECTRICAL EQUIPMENT EXISTING TO REMAIN, INCLUDING BUT NOT LIMITED TO CONDUITS, WIRING, DEVICES, AND FIXTURES AS REQUIRED.

DASHED WALLS ON THE DEMOLITION PLANS INDICATE IN GENERAL EXISTING WALLS BEING DEMOLISHED. DO NOT RELY ON ELECTRICAL DRAWINGS TO DETERMINE EXTENT OF GENERAL CONSTRUCTION DEMOLITION. REFER TO ARCHITECTURAL DEMOLITION PLANS FOR THE EXACT EXTENT OF GENERAL CONSTRUCTION DEMOLITION REQUIRED BY THIS CONTRACT.

REFER TO DEMOLITION DRAWINGS OF OTHER TRADES. WHERE MOTORS, CONTROL PANELS, AND OTHER LOADS THAT HAVE AN ELECTRICAL CONNECTION ARE BEING REMOVED, INCLUDE THE DISCONNECTION AND REMOVAL OF ASSOCIATED ELECTRICAL FEEDS, CIRCUITS, AND LOOSE CONTROL EQUIPMENT IN THIS CONTRACT.

EXISTING TO REMAIN "ETR" ON THIS DEMOLITION PLANS REFERS TO THE STATUS OF BASIC ELECTRICAL DEVICES. THERE MAY BE SOME WORK REQUIRED IN THESE SPACES INVOLVING BACK-FEEDING EXISTING CIRCUITS OR OTHER MODIFICATIONS. SEE ALL DOCUMENTS THAT MAKE UP THIS CONTRACT FOR THE TOTAL EXTENT OF WORK REQUIRED IN ALL SPACES.

EC SHALL COORDINATE REMOVAL AND REPLACEMENT OF ANY ELECTRICAL CEILING DEVICES (I.E. LIGHT FIXTURES, FIRE ALARM, ETC.) OUTSIDE THE AREA OF WORK TO ACCOMMODATE THE NEW CONSTRUCTION.

EXISTING DEVICES MAY BE REUSED, IN-LIEU OF PROVIDING NEW DEVICES SHOWN ON ELECTRICAL DRAWINGS IN THIS SET, PROVIDED THE DEVICES ARE CLEAN, IN WORKING CONDITION AND ACCEPTABLE TO BE REUSED PER THE OWNER.

ELECTRICAL CONTRACTOR SHALL REFER TO THE ARCHITECTURAL PLANS FOR LOCATIONS OF SMOKE PARTITIONS AND FIRE RATED WALLS, FLOORS, AND CEILINGS AND THEIR HOURLY RATINGS. ELECTRICAL CONTRACTOR SHALL PROVIDE FIRE STOPPING FOR ALL CONDUIT AND OTHER PENETRATIONS COVERED UNDER DIVISION 26 IN THESE SURFACES. FIRESTOPPING SHALL MEET OR EXCEED THE RATING OF THE SURFACE BEING PENETRATED.

1.

2.

3.

SHEET NOTES -

EC SHALL REFER TO ARCHITECTURAL ELEVATIONS AND FLOOR PLANS FOR EXACT LOCATIONS AND MOUNTING HEIGHTS OF ELECTRICAL DEVICES.

CIRCUIT NUMBERS INDICATED DO NOT REFLECT THE ACTUAL POSITION OF THE CIRCUIT BREAKERS IN THE PANEL; RATHER, THE NUMBERS INDICATE WHICH DEVICES ARE CONNECTED TO A COMMON CIRCUIT. E.C. SHALL UTILIZE SPARES, SPACES AND CIRCUITS RELIEVED FROM DUTY TO PROVIDE THE INDICATED NUMBERS OF CIRCUITS.

EXISTING TO REMAIN, "ETR", ON THIS PLAN REFERS TO THE STATUS OF BASIC ELECTRICAL DEVICES. THERE MAY BE SOME WORK REQUIRED IN THESE SPACES INVOLVING BACK-FEEDING EXISTING CIRCUITS OR OTHER MODIFICATIONS. SEE ALL DOCUMENTS THAT MAKE UP THIS CONTRACT FOR THE TOTAL EXTENT OF WORK REQUIRED IN ALL SPACES.


RMS SYM @ 480 VOLTS

480/277 VOLTS 3Ø 4W

65k AMPS

GROUP MOUNTED

MC MC MC MC MC MC MC MC MC MCMC MC MC MC

3"C.

350 kcmil &3

#2 GRD1

COPPER

1"C.

#3 &3

#10 GRD1

COPPER

1"C.

#3 &3

#10 GRD1

COPPER

SS MC MC

XX

XX

MANUAL OR AUTOMATIC

MEDIUM VOLTAGE

POWER LINE

PANELBOARD

OVERLOAD

ENCLOSURE

EQUIPMENT CONNECTION -

ENGINE GENERATOR

TRANSFORMER

XX

XX

SURGE SUPPRESSION

DENOTESLA = LIGHTNING ARRESTORSSPD = SURGE PROTECTIVE DEVICE

FEEDER CONTINUATION CONNECTION #

FEEDER CONTINUED ON SHEET INDICATED

DEVICE UPSTREAM OR DOWNSTREAM

(CAP)

(ATS)

CAPACITOR

AUTOMATIC TRANSFER SWITCHKEY INTERLOCKING - KEY #KEY NORMALLY REMOVED

SEE EQUIPMENT SCHEDULE

"AF" - DENOTES AMP FRAME

"XXX" - DENOTES AMP RATING

GP - GROUND FAULT PROTECTION - PERSONNEL

UVT - UNDER VOLTAGE TRIPST - SHUNT TRIP

MC - MOLDED CASE CIRCUIT BREAKER

SS - SOLID STATE MOLDED CASE CIRCUIT BREAKER

IC - INSULATED CASE CIRCUIT BREAKERPC - LOW VOLTAGE POWER CIRCUIT BREAKER

GE - GROUND FAULT PROTECTION - EQUIPMENT

ALS - ALARM SWITCHAXS - AUXILIARY SWITCHEOP - ELECTRIC OPERATOR

AF - ARC FAULT CIRCUIT INTERRUPTER (RESIDENTIAL ONLY)

CL - CURRENT LIMITING

DOUBLE CONVERSION SINGLE INPUTUNINTERRUPTIBLE POWER SUPPLY (UPS)

(MODIFY TO MAKE JOB SPECIFIC)

(XX) DEVICE DESIGNNATION

DENOTES THE FOLLOWING:


(CB) CIRCUIT BREAKER

(CON) CONTACTOR

(DS) DISCONNECT SWITCH

(VM)

(AM)

VOLTMETER

AMMETER


(VS) VOLTMETER SWITCH

(AS) AMMETER SWITCH

(M) KWHR METER

(DM) DIGITAL METER

XX

(XX) DEVICE DESIGNATION TYPE -


SEE SPECIFICATION

-SEE SCHEDULE & DETAILS

"AS" - DENOTES AMP SENSOR

"AT" - DENOTES AMP TRIP

GS - GROUND FAULT SENSING / ALARMHC - HEATING, COOLING, AIR CONDITIONING, REFRIGERATION - HCARHM - HIGH MAGNETIC - HID, MOTORS

MS - MOLDED CASE SWITCHMP - MOTOR CIRCUIT PROTECTOR

L1 - LONG TIME / INSTANTANEOUS - LIL2 - LONG TIME / SHORT TIME / INSTANTANEOUS - LSIL3 - LONG TIME / SHORT TIME / INSTANTANEOUS / GROUND FAULT TRIP - LSIGL4 - LONG TIME / SHORT TIME / INSTANTANEOUS / GROUND FAULT SENSING - LSIASC - SYSTEM COMMUNICATIONSD - SYSTEM DIAGNOSTICSSM - SYSTEM MONITORINGZS - ZONE SELECTIVE INTERLOCKING

"XXX" - DENOTES AMP RATING

VW - VIEWING WINDOW

AXS - AUXILIARY SWITCHDL - DOUBLE LUGSPL - PILOT LIGHT

DS - UNFUSED DISCONNECT SWITCHEDS - ELEVATOR DISCONNECT SWITCH

"AS" - DENOTES AMP SWITCH

"AF" - DENOTES AMP FUSE

AR - ARC FLASH REDUCTIONMEDIUM VOLTAGE

MEDIUM VOLTAGE

MEDIUM VOLTAGE

MEDIUM VOLTAGE

FUSE

FUSIBLE SWITCH

SWITCH

FUSED CUTOUT

CABLE TERMINATION

LOW VOLTAGE

LOW VOLTAGE FUSED

LOW VOLTAGE

LOW VOLTAGE

LOW VOLTAGE

FUSE

DISCONNECT SWITCH

DISCONNECT SWITCH

CIRCUIT BREAKER

DRAWOUT

LOW VOLTAGE

DRAWOUT POWER

CIRCUIT BREAKER

CIRCUIT BREAKER

POTENTIAL TRANSFORMER

CURRENT TRANSFORMER

CAPACITOR

GROUND

G

JUNCTION BOX

KEY INTERLOCKING - KEY #KEY NORMALLY INSERTED-SEE SCHEDULE & DETAILS

TRANSFER SWITCH

NORMALLY CLOSEDCONTACTOR

NORMALLY OPENCONTACTOR

CONTROL SWITCH

FLOAT SWITCH

LIGHT FIXTURE

NO

NC

NO

DOUBLE CONVERSION DUAL INPUTUNINTERRUPTIBLE POWER SUPPLY (UPS)

(MODIFY TO MAKE JOB SPECIFIC)

CONDITIONER

FR - FULLY RATED (100%)

1. ALL ITEMS INDICATED BY A DARK SOLID LINE AS SHOWN BELOWARE NEW.

2. ALL ITEMS INDICATED BY A LIGHT DASHED LINE AS SHOWN BELOWARE EXISTING TO REMAIN.

3. ALL ITEMS INDICATED BY A DARK DASH-DOT-DASH LINE AS SHOWNBELOW ARE EXISTING TO BE REMOVED.

4. ALL ITEMS INDICATED BY A LIGHT DASH-DOT-DASH LINE AS SHOWNBELOW ARE TYPICAL EQUIPMENT DIVISIONS.

5. ALL ITEMS INDICATED BY A LIGHT SOLID LINE AS SHOWN BELOWARE FUTURE.

6. ALL DOWNTIME SHALL BE SCHEDULED WITH THE OWNER ANDSHALL BE KEPT TO AN ABSOLUTE MINIMUM.

7. THE PANELS AND SWITCHBOARDS INDICATED ON THE ONE LINEDIAGRAM SHALL BE PROTECTED FROM AVAILABLE FAULTCURRENT SHOWN BY EITHER OF THE FOLLOWINGMETHODS:

- PROVIDE BREAKERS WITH A MINIMUM AIC RATING GREATERTHAN INDICATED

- THE SERIES RATING METHOD IS NOT ACCEPTABLE

1 - NON VENTILATED ENCLOSURE2 - INTEGRAL STRIP HEATER3 - WEATHER SHIELD

OPTIONS

TEMPERATURE RISE

SECONDARY VOLTAGE

PRIMARY VOLTAGE

kVA

TRANSFORMER ID

RATING

TYPEDT - DRY TYPELF - LIQUID FILLEDDP - DRY TYPE PAD MOUNTLP - LIQUID FILLED PAD MOUNT

GP - GENERAL PURPOSEK-# - K-RATED

EE - ENERGY EFFICIENT

4 - NEMA 3R5 - STAINLESS STEEL

CR - CAST RESINEC - ENCAPSULATED CORE

N - NORMAL BRANCHLS - LIFE SAFETY BRANCHCR - CRITICAL CARE BRANCH

BRANCH

EQ - EQUIPMENT BRANCHEM - EMERGENCY BRANCH

TRANSFER SWITCH ID

ES - ESSENTIAL SYSTEMSNES - NON ESSENTIAL SYSTEMS

AMPS

VOLTAGE

CLOSING & WITHSTAND AIC RATING

TRANSFERAUTO - AUTOMATICMAN - MANUAL

POLES

TRANSFER SWITCH TYPE

OPTIONS1 - LOAD SHED RELAY2 - BLOCK TRANSFER RELAY3 - SYNCH CHECK RELAY4 - PEAK READING AMMETER5 - STANDARD METER6 - VOLTMETER7 - COMPRESSION LUGS8 - ELEVATOR INTERFACE RELAY

BYPASSNON BYPASSFIRE PUMP

TRANSITIONOPEN TRANSITIONCLOSED TRANSITIONDELAYED TRANSITION

TYPE

OPTIONS1 - UNIT STATUS INDICATORS2 - AUDIBLE ALARM3 - TRANSIENT COUNTER4 - REMOTE MONITOR PANEL5 - SERVICE DISCONNECT SWITCH6 - SUMMARY ALARM RELAY CONTACTS7 - HIGH PERFORMANCE INTERCONNECT CABLE

SE - 125 kA - SERVICE ENTRANCEBP - 80 kA - BRANCH PANEL VOLTAGE

SPD ID

BYPASS ISOLATIONTRANSFER SWITCH

MOUNTING TYPE

8 - MASTERMIND MONITORING

(JB) JUNCTION BOX

(MTS) MANUAL TRANSFER SWITCH

(T) TRANSFORMER

(SS) SURGE SUPPRESSION

(UPS) UNINTERRUPTIBLE POWER SUPPLY

(WW) WIREWAY

(FS) FUSIBLE SWITCH

(F) FUSE

(MVF) MEDIUM VOLTAGE FUSE

(MVFS) MEDIUM VOLTAGE FUSIBLE SWITCH

(MVS) MEDIUM VOLTAGE SWITCH

(MVT) MEDIUM VOLTAGE CABLE TERMINATION

(PLC) POWER LINE CONDITIONER

(MVC) MEDIUM VOLTAGE FUSED CUTOUT

(EDP) ELEVATOR DISTRIBUTION PANEL

(EDS) ELEVATOR DISCONNECT SWITCH

MD - MODIFIED DIFFERENTIAL GROUND FAULT

(BW) BUS WAY

BUSCOPPERALUMINUM

TYPEINDOOROUTDOOR

CYCLE CLOSING & WITHSTAND RATING3 CYCLE30 CYCLE

9 - OVERLAPPING NEUTRAL CONTACTS10 - DIGITAL METERING

FS - FUSED DISCONNECT SWITCH

XX

XXX

XXX

XX

XXXXX

XXXAF

XXXAS

XXXAT

3P

FS XXX

XXXAS

XXXAF

3P

K#

K#

X

X

2

1

EXX

XXX/XX

XXX

X

XXX kVA

/ X / X

P: XXX

S: XXX

XXX XXX

X / X / X / X / X

XXX

XXX

XXX

XXX XXX

XXXXXX

XXX

XXX

XXX

X / X / X / X

XXX

XXXXXX

XXXXXX

DS XXX

XXXAS

XXXAF

3P

XXXXXX

XXXXXX

MIN AIC RATING =

XXX VOLTS 3∅ 4W

RMS SYM @ XXX VOLTS

XXXk AMPS

XXX AMPS @

XXX XXXBUS: TYPE:

XXX

70 AT

3P

800 AMPS @

MAIN SECTION:

DISTRIBUTION SECTION:

MIN AIC RATING =

DISTRIBUTION PANELBOARD CONSTRUCTION

MAIN LUGS ONLY

15 AT

3P

15 AT

3P

20 AT

3P

20 AT

3P

50 AT

3P

25 AT

3P 3P 3P

30 AT

3P

RTU-3 EAST BATH

SPARE SPARE

RTU-2 RTU-1EX-FAN

EVAP. COND.PUMP

EASTELEVATOR

25 AT

WESTELEVATOR

30 AT

RTU-2

300 AT

3P

REFR.COMP #1

300 AT

3P

REFR.COMP #2

40 AT

3P

200 AT

3P

TOWERFAN

AIR DISCHARGEFAN

600 AF

450 AT

3P

100 AF

60 AT

3P

100 AF

60 AT

3P

ACC-1 CWP-1 CWP-2

MSB

L2

CIRCUIT BREAKER INFORMATION

CIRCUIT BREAKER ACCESSORIES

CIRCUIT BREAKER TYPE

SPECIAL ONE-LINE SYMBOLS

ONE-LINE SYMBOLS

CIRCUIT BREAKER OPTIONS

LOW VOLTAGE DISCONNECT SWITCH INFORMATION

DISCONNECT SWITCH ACCESSORIES

DISCONNECT SWITCH TYPE

GENERAL NOTES -

T

TRANSFORMER INFORMATION

ATS

TRANSFER SWITCH INFORMATION

SPD

SURGE PROTECTIVE DEVICE

BW/

BUS WAY

PHDP



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

ONE LINEDIAGRAM

02/22/2019

218089.00

E400

R&D R&D

12" = 1'-0"1PARTIAL ONE LINE DIAGRAM


MECHANICAL EQUIPMENT SCHEDULEFEED FROM OCPD BRANCH WIRING MOTOR CONTROLLER DISCONNECT SWITCH CONNECTION REQUIREMENTS SEE

NO. SERVING LOC. VOLT/ HP FLA KW PANEL CKT BRNH TYPE SIZE POLE NO. SIZE GRD COND GRD FURN INST WIRE LOC. TYPE OPTIONS FURN INST WIRE LOC. OPTIONS NEMA TYPE OPTIONS MTG HEIGHT NOTE

PHASE (Y/N) SIZE BY BY BY BY BY BY

ACC-1 AIR COOLED CHILLER ROOF 480/3 192.9 SD SD SD SD SD SD SD SD SD SD SD MFR MFR EC IU MAG - MFR MFR EC OU 4,6 - 3,10 -

CWP-1 CHILLED WATER SYSTEM DISTRIBUTION PUMP PENTHOUSE 480/3 20 27 SD SD SD SD SD SD SD SD SD SD SD MC EC EC NU VFD - - - - - - - 3 -

CWP-2 CHILLED WATER SYSTEM DISTRIBUTION PUMP PENTHOUSE 480/3 20 27 SD SD SD SD SD SD SD SD SD SD SD MC EC EC NU VFD - - - - - - - 3 -

-

GSF-1 GLYCOL SYSTEM FEEDER PENTHOUSE 120/1 0.7 PHPP 24 N CB 20 1 2 12 Y 3/4 12 - - - - - - - - - - - - 3 -

TCP-1 TEMPERATURE CONTROL PANEL PENTHOUSE 120/1 0.6 PHPP 20 N CB 20 1 2 12 Y 3/4 12 - - - - - - - - - - - - 3 -

TCP-2 TEMPERATURE CONTROL PANEL PENTHOUSE 120/1 0.6 PHPP 22 N CB 20 1 2 12 Y 3/4 12 - - - - - - - - - - - - 3 -

CP-1 CIRCULATION PUMP BSMT 120/1 0.06 1.3 S SFP N CB 15 1 2 12 Y 1/2 12 PC EC EC NU CS - EC EC EC NU 7,9 - 3,10 -

WH-1 WATER HEATER BSMT 120/1 0.6 S SFP N CB 20 1 2 12 Y 3/4 12 - - - - - - EC EC EC NU 7,9 - 3,10 -

ABBREVIATIONS:

N = NORMAL BRANCH CB = AMPERE RATED CIRCUIT BREAKER MFR = MANUFACTURER 2SP = 2 SPEED MAGNETIC CONTROLLER SFS = SEE FOOD SERVICE PLANS SA = SEE ARCHITECTURAL DETAILS

LS = LIFE SAFETY BRANCH F = AMPERE RATED FUSES PC = PLUMBING CONTRACTOR VFD = VARIABLE FREQUENCY DRIVE SD = SEE ONELINE DIAGRAM

CR = CRITICAL CARE BRANCH OCPD = OVERCURRENT PROTECTIVE DEVICE MAN = MANUAL CONTROLLER IU = IN UNIT BOL = BUILT-IN OVERLOAD

EQ = EQUIPMENT SYSTEM EC = ELECTRICAL CONTRACTOR MAG = MAGNETIC CONTROLLER NU = NEAR UNIT WP = WEATHER PROOF

EM = EMERGENCY SYSTEM FSEC = FOOD SERVICE EQUIP. CONTRACTOR CS = COMBINATION CONTROLLER OU = ON UNIT FD = FUSIBLE DISCONNECT

ES = ESSENTIAL SYSTEM MC = MECHANICAL CONTRACTOR RVS = REDUCE VOLTAGE CONTROLLER SFP = SEE FLOOR PLANS LMRS = LOCKABLE MOTOR RATED SWITCH

OPTIONS:

1 = SINGLE RECEPTACLE 4 = NON FUSIBLE DISCONNECT 7 = LOCKABLE 10 = VERIFY WITH MANUFACTURER PRIOR TO INSTALLATION 13 = GFI RECEPTACLE

2 = DUPLEX RECEPTACLE 5 = FUSIBLE DISCONNECT 8 = CONCEALED 11 = SURFACE MOUNTED 14 = FED FROM UPSTREAM GFI BREAKER

3 = DIRECT CONNECTION 6 = WEATHERPROOF 9 = TOGGLE SWITCH 12 = FLUSH MOUNTED

MECHANICAL EQUIPMENT SCHEDULE NOTES:

1.

EXISTING PANEL SCHEDULEDESIG. NEW BREAKERS ADDED EXISTING BREAKERS REUSED LOC. BUSSING VOLTAGE AIC MANUFACTURER SEE

QTY P AMP ACCESSORIES QTY P AMP ACCESSORIES QTY P AMP QTY P AMP RATING AND TYPE NOTE

3 1 20 400A 120/208

PHPP PENT MCB 3PH, 4W SQUARE D

2 1 20 225A 120/208

2A 2ND MLO 3PH, 4W SQUARE D

2 1 20 100A 120/208

S BSMT MLO 3PH, 4W SQUARE D

ABBREVIATIONS: ACCESSORIES:

MCB = MAIN CIRCUIT BREAKER 1 = ALARM SWITCH 5 = GROUND FAULT PROTECTION 9 = ZONE SELECTIVE INTERLOCKING

MLO = MAIN LUGS ONLY 2 = AUXILIARY SWITCH (PERSONNEL)

SFP = SEE FLOOR PLANS 3 = ELECTRICAL OPERATOR 6 = GROUND FAULT SENSING/ALARM

4 = GROUND FAULT PROTECTION 7 = SHUNT TRIP

(EQUIPMENT) 8 = UNDER VOLTAGE TRIP

EXISTING PANEL SCHEDULE NOTES:

LIGHT FIXTURE SCHEDULE FIXTURE LIGHT SOURCE BALLASTS/DRIVERS INPUT

VOLT MOUNTSURFACE FIXTURE FIXTURE SPECIFICATION AND ACCEPTABLE MANUFACTURERS

OPTIONSSEE

ID DESCRIPTION TYPE NO. DESCRIPTION WATTS K CRI (MIN.) TYPE CONTROL NO. WATTS TYPE DEPTH MANUFACTURER CATALOG SERIES NOTE

AA

2X4 TROFFER 4000 LITHONIA 2TL

FROSTED PRISMATIC LENS #A19 PATTERN LED - DELIVERED WATTS K 80 DR 1 WATTS VOLT R CEILING <5" COLUMBIA LLT 7,12

LUMENS

XH

EXIT SIGN - SINGLE FACE LITHONIA TL

THERMOPLASTIC HOUSING LED - IN UNIT 3 - - - - - 3 VOLT S V - METALUX GRLED 61

UNIVERSAL MOUNTING DAYBRITE, COLUMBIA TG,LLT

NOTE:

SEE SPECIFICATION SECTIONS 26 50 00 FOR ADDITIONAL INFORMATION REGARDING LIGHTING FIXTURE AND INSTALLATION REQUIREMENTS. PROVIDE OPTIONS AND ACCESSORIES REFERENCED BY THE COLUMN TITLED "OPTIONS".

MANUFACTURERS AS ACCEPTABLE SHALL MEET ALL REQUIREMENTS AND FEATURES INDICATED. ACCEPTABLE MANUFACTURERS MUST MEET THE PHOTOMETRIC PERFORMANCE OF THE LISTED UNIT.

ABBREVIATIONS:

AR = AS REQUIRED DMX = ADDRESSABLE, DIMMING <1-100% FD10 = FLUORESCENT DIMMING 10-100% OT = OTHER STN = STONE

BL = BI-LEVEL SWITCHING DR = DRIVER GRD = GRADE PD = PENDANT SUSP = SUSPENDED

BT = BLUETOOTH DW = DRYWALL H = HID PL = PLASTER SW = SWITCHING

CAB = UNDERCABINET ELV = ELECTRONIC LOW VOLTAGE DIMMING HAL = HALOGEN PS = PULSE START T = CERAMIC/GLASS TILE

CL = CLEAR EM = EMERGENCY HBF = HIGH BALLAST FACTOR R = RECESS TW = TUNABLE WHITE LED

DALI = ADDRESSABLE, DIMMING <1-100% ES = EXPOSED STRUCTURE I = INCANDESCENT RGB = RED, GREEN, BLUE LEDS V = VARIES

DM0 = LED DIMMING 0-10V, 0 -100% ET = ELECTRONIC BALLAST LBF = LOW BALLAST FACTOR RM = REMOTE W = WALL MOUNTED

DM1 = LED DIMMING 0-10V, 1 -100% F = FLUORESCENT LG = LAY-IN GRID S = SURFACE WD = WOOD

DM5 = LED DIMMING 0-10V, 5 -100% FD1 = FLUORESCENT DIMMING 1-100% MLV = MAGNETIC LOW VOLTAGE DIMMING SPEC = SPECIAL XFMR = TRANSFORMER

DM10 = LED DIMMING 0-10V, 10 -100% FD5 = FLUORESCENT DIMMING 5-100% NBF = NORMAL BALLAST FACTOR ST = STANDARD

DMW = DIM TO WARM LED

OPTIONS:

1 = POST PAINTED FINISH 21 = FURNISH WITH AIR HANDLING CAPABILITY 41 = MATTE DIFFUSE LOW IRIDESCENT REFL. 61 = FURNISH WITH UNIVERSAL ARROWS AND GREEN STENCIL FACE

2 = REGRESSED ALUMINUM DOOR FRAME 22 = FURNISH WITH WIRE GUARD 42 = FURNISH WITH SYMMETRICAL REFLECTOR 62 = FURNISH WITH FIELD ADJUSTABLE CHEVRONS

3 = FLAT STEEL DOOR FRAME 23 = FURNISH WITH ENDCAPS 43 = FURNISH WITH ASYMMETRICAL REFLECTOR 63 = FURNISH WITH MIRRORED BACKGROUND

4 = FLAT ALUMINUM DOOR FRAME - MITERED CORNERS 24 = FURNISH IN LENGTH AS SHOWN 44 = FURNISH WITH TOP AND BOTTOM LENS 64 = FURNISH WITH INTEGRAL BATTERY

5 = STAINLESS STEEL TRIM AND DOOR FRAME 25 = FURNISH WITH SOLID FRONT 45 = FURNISH WITH LOUVER 65 = FURNISH WITH INTEGRAL HIGH CAPACITY BATTERY (FOR REMOTE HEADS)

6 = FURNISH WITH SPRING LOADED LATCHES 26 = FURNISH WITH DUST COVER 46 = FURNISH WITH PERFORATED DIFFUSER 66 = FURNISH WITH SELF DIAGNOSTICS

7 = FURNISH WITH HINGED DOOR 27 = CUSTOM FINISH - SELECTION TBD 47 = FURNISH WITH EGGCRATE LOUVER 67 = FURNISH WITH AUXILIARY EMERGENCY BATTERY BALLAST/DRIVER

8 = DAMP LOCATION CONSTRUCTION 28 = STANDARD FINISH - SELECTION TBD 48 = FURNISH WITH SOFTENING LENS 68

9 = WET LOCATION CONSTRUCTION 29 = FURNISH WITH HOUSE SIDE SHIELD 49 = FURNISH WITH PRISMATIC LENS 69

10 = IP65 RATING 30 50 = FURNISH WITH LINEAR SPREAD LENS 70

11 = IP66 RATING 31 51 = FURNISH WITH SPREAD LENS 71 = FURNISH WITH ANTI-MICROBIAL FINISH

12 = IP67 RATING 32 52 72 = CERTIFIED FOR MIL-STD461F

13 = NEMA 4X RATED 33 = FURNISH WITH CHAIN MOUNTING 53 73 = FURNISH WITH RF NOISE SUPPRESSORS (ADVANCE RIF-1) FOR EACH DRIVER

14 = IC RATING 34 = FURNISH WITH RIGID STEM MOUNTING 54 = FURNISH WITH ROCKER SWITCH 74 = FURNISH WITH ACRYLIC LENS WITH INTEGRAL RFI SHIELDING

15 = ADA COMPLIANT 35 = FURNISH WITH SWIVEL CANOPY 55 = FURNISH WITH INTEGRAL OCC. SENSOR 75 = FURNISH WITH LOW VOLTAGE CONTROL (LVC)

16 = DOUBLE GASKETED-LENS TO TRIM TO CEILING 36 = FURNISH WITH ADJUSTABLE AIRCRAFT CABLE MOUNTING 56 = FURNISH WITH INTEGRAL DAYLIGHT SENSOR

17 = TRIPLE GASKETED-LENS TO DOOR TO HOUSING TO CEILING 37 = FURNISH WITH ADJUSTABLE MOUNTING HARDWARE 57 = FURNISH WITH INTEGRAL PHOTOCELL

18 = FURNISH WITH TAMPER RESISTANT HARDWARE 38 = FURNISH WITH MANUFACTURER'S CUSTOM JUNCTION BOX 58 = FURNISH WITH REMOTE DRIVER

19 39 = FURNISH WITH RECESSED SLOPE ADAPTER 59 = FURNISH WITH CURRENT LIMITING DEVICE

20 40 60

GENERAL NOTES:

1. VERIFY CEILING T-BAR WIDTH (I.E. 9/16", 15/16", 1.5") WITH THE ARCHITECT/INTERIORS SPECIFICATION PRIOR TO ORDERING LAY-IN FIXTURES.

2. IN ALL INSULATED OR FIRE RATED CEILINGS, THE EC SHALL BE RESPONSIBLE FOR THE PROPER TENTING (OR FIRE BOXING) OF THE RECESSED FIXTURES. FOR PREFAB PRODUCTS REFER TO TENMAT OR SPECIALTY PRODUCTS AND INSULATION.

3. VERIFY DIMMING BALLAST / DRIVER COMPATIBILITY WITH DIMMING CONTROL.

4. REFER TO ARCHITECTURAL ELEVATIONS FOR EXACT LOCATION AND MOUNTING HEIGHT.

5. TO MEET SPECIFIED DELIVERED LUMEN PACKAGE PROVIDE PROGRAMMED DRIVER AS REQUIRED.

6. FIXTURE PERFORMANCE TOLERANCES: CCT +/- 200 DEGREES; DELIVERED LUMENS +/- 5%; ENERGY CONSUMPTION +/- 5%; BEAM SPREAD DISTRIBUTION +/- 5 DEGREES AND AS OUTLINED IN 26 50 00.

7. IF SUBMITTING A FIXTURE FOR APPROVAL AS AN EQUAL, PROVIDE CUT SHEET AND IES PHOTOMETRIC FILE PRIOR TO BIDDING. A WORKING SAMPLE OF THE FIXTURE IS REQUIRED FOR APPROVAL BY THE A/E.

LIGHT FIXTURE SCHEDULE NOTES:

1. MANUFACTURERS, PRODUCTS, AND DESCRIPTIONS LISTED IN THE LIGHTING FIXTURE SCHEDULE ARE THE BASIS OF DESIGN SPECIFICATION FOR EACH FIXTURE TYPE. EQUAL PRODUCTS WILL BE ENTERTAINED UNLESS OTHERWISE NOTED. ALL PROPOSED EQUAL PRODUCTS ARE REQUIRED TO MEET OR EXCEED ALLOF THE SPECIFICATION REQUIREMENTS LISTED IN THE LIGHTING FIXTURE SCHEDULE INCLUDING BUT NOT LIMITED TO: PRODUCT GRADE, LIGHT SOURCE TECHNOLOGY, CONTROL TECHNOLOGY, OPTICAL PERFORMANCE (DELIVERED LUMENS OR CBCP), DISTRIBUTION, FIXTURE ACCESSORIES, CONSTRUCTION,DIMENSIONS, MOUNTING, FINISH, ENERGY PERFORMANCE, AND LISTINGS/RATINGS.

THE SPECIFIER HAS EVALUATED ALL OF THE MANUFACTURERS LISTED BELOW AND CONSIDERS THESE MANUFACTURERS TO BE OF A QUALITY THAT MEET GENERAL SPECIFICATION REQUIREMENTS FOR THE CATEGORY OF PRODUCT UNDER WHICH THEY ARE LISTED. ALTHOUGH MANUFACTURERS ARE LISTED BELOWIT DOES NOT ENSURE THAT THEY HAVE PRODUCTS THAT MEET ALL OF THE SPECIFICATION REQUIREMENTS FOR EACH FIXTURE TYPE. IT MEANS THAT THESE MANUFACTURERS HAVE ALREADY BEEN EVALUATED AND HAVE PRODUCTS THAT SHALL BE REVIEWED FOR APPLICABILITY AS EQUALS. MANUFACTURERS THATARE NOT LISTED BELOW WILL REQUIRE A WORKING SAMPLE FOR SPECIFIER TO REVIEW IN ORDER TO BE EVALUATED FOR APPLICABILITY.

THE BURDEN OF MEETING THE BASIS OF DESIGN SPECIFICATION IS ON THE DISTRIBUTOR QUOTING THE PROJECT. DETERMINATION OF EQUIVALENCY IS THE RESPONSIBILITY OF THE SPECIFIER. EVEN IF A PROPOSED EQUAL PRODUCT IS FROM ONE OF THE MANUFACTURERS LISTED BELOW, IF IT DOES NOT MEET THEBASIS OF DESIGN SPECIFICATION REQUIREMENTS THEN IT WILL BE REJECTED. THERE SHALL BE NO ADDITIONAL COST ASSOCIATED WITH REJECTION OF A FIXTURE NOT DEEMED EQUIVALENT BY THE SPECIFIER.

A. COMMERCIAL TROFFERS AND WHITEGOODS – COLUMBIA, CREE, DAYBRITE, DAY-O-LITE, HE WILLIAMS, LITHONIA, METALUX, MERCURY , PMC

B. EXIT AND EMERGENCY – CHLORIDE, DUAL-LITE, EMERGI-LITE, EVENLITE, HE WILLIAMS, ISOLITE, LITHONIA, MULE, SURE-LITES



SHEET NAME

DRAWN APPROVED

DATE

R&D PROJECT NO.

SHEET NUMBER

PROJECT TITLE



PROJECT 2019

ELECTRICAL

SCHEDULES

02/22/2019

218089.00

E600

R&D R&D


milwaukee intermodal station · mkbd marker board mo masonry opening mp manufactured metal panel...

Documents