mini wireless presenter plus
TRANSCRIPT
Microsoft Word - Mini Wireless Presenter PLUS manual _No name
English-Chinese_.docUser’s Manual
Be sure to carefully read this User’s Manual first for the proper use of the Mini Wireless Presenter PLUS and keep it for future reference.
2
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written prior permission of the seller. The seller provides this document without warranty, or condition of any kind. The seller may make improvements or change in the product described in this documentation at any time. Other product and company name herein may be the trademarks of their respective owners. c 2005 All rights reserved. IMPORTANT SAFETY AND HEALTH INFORMATION
WARNING! RISK OF INJURY! Laser beam can cause permanent damage to eyes. Do not look into the laser beam or shine the laser beam into your eyes, other peoples’ eyes, or pet’s eyes.
WARNING! RISK OF INJURY! Keep this device away from Children. This is a working tool, not a toy or entertainment device. It should only be used by adults.
Trademarks: Windows, Windows Media, Microsoft and PowerPoint are registered trademarks of Microsoft Corporation.
PowerDVD is a registered trademark of CyberLink Corp.
WinDVD is a registered trademark of InterVideo, Inc.
Other trademarks and registered trademarks not listed above may be used in this manual.
3
Equipment checklist 4
Take out the USB receiver (Fig. 4) 6
Put back the receive (Fig. 5) 6
Chapter 3 Getting Started
Using the Mini Wireless Presenter PLUS 8
Presentation Mode (Fig. 6)
Multimedia Mode: (Fig. 7)
Chapter 4 Additional Information
4
Chapter 1 Introduction Thank you for choosing the Mini Wireless Presenter PLUS. — “Totally Control Your Presentation and PC Multimedia”
What’s the benefits
3-in-1 Multi-function The Mini Wireless Presenter PLUS combines the features of Laser Pointer, PowerPoint® controls and PC multimedia remote control into a compact PC Card-sized device. It enables you to remote control your PowerPoint presentation up to 100 feet (30 meters) indoors, and the laser pointer up to 130 feet (40 meters) from the target. Mini Wireless Presenter PLUS is also designed for Windows Media Player®, WinDVD® and PowerDVD® remote control, having your own way to enjoy PC entertainment leisurely and carefree.
Slim, compact and easy to carry
The Mini Wireless Presenter PLUS is a special design of fully integrated remote, its USB dongle is designed slim enough to snap into the main body and fit the whole wireless presenter into the PC card slot of your notebook PC.
Easy to use
The Mini Wireless Presenter PLUS is a USB plug-and-play device with no additional software required.
Equipment Checklist
Carefully unpack your Mini Wireless Presenter PLUS, and keep the packing materials for future reference. Check to make sure you have all the following items:
Mini Wireless Presenter (with USB receiver) 1 CR2032 battery 1 User’s Manual 1
Requirements
5
Fig. 1 Front View
Fig. 2 Rear View
Fig. 3 USB Receiver
6
Take out the USB Receiver Pull up the USB receiver and take out the receiver
Fig. 4
Put back the USB Receiver
Insert the bottom of the USB receiver, label upwards, into the compartment first and press the USB receiver to the compartment. Fig. 5
7
Chapter 3 Getting Started Initial setup the Mini Wireless Presenter PLUS
Step 1: Inserting the batteries
Open the battery cover on the back and insert the battery with the (+) side up. Note: Do not insert battery into the battery chamber in the wrong direction.
Step 2: Connecting the USB receiver
Take out the USB receiver attached on the back and plug it into an available USB port exactly (please refer to page 6).
You may encounter the following conditions with different Operating Systems:
Windows® 98 SE/ME The system will prompt you to insert the operating system CD-ROM and the follow the instruction to install the software required.
Window® 2000/XP The operation system identifies the receiver, prompts ”USB Human Interface Device” and begins installation automatically. Please follow the instruction on the screen to complete the installation procedure.
Step 3: Opening PowerPoint presentation file on your screen Step 4: Turning on the Laser Pointer
Press the “Laser” button for 3 seconds till the mode indicator blinking in orange to activate the Laser function. Note: The laser function will automatically shut off after 30 minutes idle time, and meantime, the laser function will turn off under Multimedia mode, please make sure you are under Presentation mode when using laser pointer.
Step 5: Choosing the operation mode
There are two operation modes for Mini Wireless Presenter PLUS, one is Presentation Mode for PowerPoint, another is Multimedia Modefor Windows Media Player®, PowerDVD® and WinDVD® remote control. (Please refer to page 9 for the mode change)
Note: Default setting isPresentation Mode
8
Using the Mini Wireless Presenter PLUS – Presentation Mode ~ Laser Pointer + PowerPoint Controls ~
Fig. 6
Mode Change mode
Press Mode button, the right-hand Mode indicator lights up and shows you the mode you are in, press Mode button for 1 second to change to next mode sequentially between Presentation, Media Player, PowerDVD and WinDVD. Note: Default setting in Presentation mode, please remember to click any key and check the mode indicator to confirm you are in the right mode you want.
Mode Indicator Indicate the operation mode
No light: PowerPoint Presentation Green light: Media Player application Orange light: PowerDVD application Green and Orange lights: WinDVD application Note: The mode indicator will light up to identify what mode you are in while you press any key.
Laser Shoot the laser Press to shoot the laser beam
Slides Start slide show Click this key to start slide show.
Esc Exit slide show Click this key to exit slide show.
Next Go to next slide Click this key to go to next slide.
Prev. Go to previous slide Click this key to go to previous slide.
Black Turn the presentation screen to black Click this key to turn the whole screen black.
White Turn the presentation screen to white Click this key to turn the whole screen white.
Link ID To change ID
Click the “ID Link” button on the USB dongle first, the “Link Indicator” lights up, and then press “Fast rewind ” and “Slides” buttons simultaneously until the Link Indictor blinks. Note: Implement ID change ONLY when serious RF interference causes the remote control malfunction.
Note: please click any key and check the mode indicator to confirm you are on the right
mode when using. (Default setting is “Presentation Mode”)
10
Using the Mini Wireless Presenter PLUS -- Multimedia Mode ~ For Media Player, PowerDVD and WinDVD Remote Control ~ Fig. 7
11
Open the disc tray Click to open the disc tray.
Play, pause or stop
Click to start or pause playing. Press and hold1 second to stop playing.
Resume playing after pressing STOP
PowerDVD: Click ENTER, select where you want to start, and then press ENTER again
WinDVDClick ENTER starts from the location where you stopped playback.
Windows Media PlayerClick PLAY starts from the beginning of the disc
Full Screen Change the image window size Click to enlarge or contract image window Note: In Windows Media Player mode, change to Full Screen only when playing.
Menu Go to the title menu Click this key to go to the title menu.
Locate a title in the title menu Click this key to move to the upper titles.
Locate a title in the title menu Click this key to move to the lower titles.
Locate a title in the title menu Click this key to move to the right titles.
Locate a title in the title menu Click this key to move to the left titles.
Enter Click to confirm the selected title
Change volume Click this key to mute volume.
Change volume Click this key to turn up volume.
Change volume Click this key to turn down volume.
Go to next chapter Click this key to go to next chapter.
Go to previous chapter Click this key to return to previous chapter.
Fast forward Click this key to speed forward play.
Fast reverse Click this key to speed backward play.
Resume to normal speed after pressing “Fast forward” or “Fast reverse”
PowerDVD and Mac DVD PlayerClick PLAY WinDVDClick ENTER Windows Media PlayerClick “Fast Forward” or “Fast reverse” again.
Note: In Windows Media Player, Menu and Direction buttons( ) are available only when Full Screen.
Note: Please remember to click any key and check the mode indicator to confirm you are on the right mode you want (Please refer to page 9 for changing operation mode)
12
Specifications
System Frequency range: 2400~2483MHz (16 multi channels and 65535 ID channels) Remote range: Approx. 100 feet (30 meters) indoors, 328 (100 meters) feet outdoors Operating voltage: Remote control 2.4V~3.3V, Laser 2.6V~3.3V Power: CR2032 battery * 1 Very low power consumption: Normal operation < 5mA Laser operation < 30mA Sleep < 10uA Output power: Under 1mW
Physical Dimensions Size: 86(l) x 54(w) x 5(h) millimeters Weight: Approx. 23 grams (with the receiver and battery)
Environmental Requirements Temperature: Operating: 0(32)~60(140) Non-operation: -10(14)~65(149) Humidity(non-condensing): Operating: 10%~85% RH Non-operating: 10%~95% RH
Laser Semiconductor laser (λ= 650 nm), emission duration: continuous Laser output power: Max. 0.95mW
Note: Design and specifications are subject to change without notice.
Care and Maintenance For cleaning, you are advised to use a soft, slightly moistened cloth. Avoid using solvents or abrasive substances. Do not open the presenter for maintenance, consult qualified staff only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause
undesired operation.
()
() 1. *1 2. (USB)*1
() 3. CR2032 * 4. *1 () Windows® 98 SE, Me, 2000, XP ()
1.
USB
5. ““
“()
17
(→Windows Media Player→PowerDVD →WinDVD)
PowerPoint Media Player () PowerDVD () WinDVD ()
PowerPoint
PowerPoint
“ “
Slides
18
19
WinDVD Windows Media Player
Windows Media Player Menu ()
“Mode Mode
20
2400~2483MHz 30 100 2.4V~3.3V CR2032 *1 1mW 23 () 86mm()*54mm()*5mm()
0(32)~60(140) -10(14)~65(149)
() 10%~85% RH 10%~95% RH
(λ= 650 nm) 0.95 mW
()
Be sure to carefully read this User’s Manual first for the proper use of the Mini Wireless Presenter PLUS and keep it for future reference.
2
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written prior permission of the seller. The seller provides this document without warranty, or condition of any kind. The seller may make improvements or change in the product described in this documentation at any time. Other product and company name herein may be the trademarks of their respective owners. c 2005 All rights reserved. IMPORTANT SAFETY AND HEALTH INFORMATION
WARNING! RISK OF INJURY! Laser beam can cause permanent damage to eyes. Do not look into the laser beam or shine the laser beam into your eyes, other peoples’ eyes, or pet’s eyes.
WARNING! RISK OF INJURY! Keep this device away from Children. This is a working tool, not a toy or entertainment device. It should only be used by adults.
Trademarks: Windows, Windows Media, Microsoft and PowerPoint are registered trademarks of Microsoft Corporation.
PowerDVD is a registered trademark of CyberLink Corp.
WinDVD is a registered trademark of InterVideo, Inc.
Other trademarks and registered trademarks not listed above may be used in this manual.
3
Equipment checklist 4
Take out the USB receiver (Fig. 4) 6
Put back the receive (Fig. 5) 6
Chapter 3 Getting Started
Using the Mini Wireless Presenter PLUS 8
Presentation Mode (Fig. 6)
Multimedia Mode: (Fig. 7)
Chapter 4 Additional Information
4
Chapter 1 Introduction Thank you for choosing the Mini Wireless Presenter PLUS. — “Totally Control Your Presentation and PC Multimedia”
What’s the benefits
3-in-1 Multi-function The Mini Wireless Presenter PLUS combines the features of Laser Pointer, PowerPoint® controls and PC multimedia remote control into a compact PC Card-sized device. It enables you to remote control your PowerPoint presentation up to 100 feet (30 meters) indoors, and the laser pointer up to 130 feet (40 meters) from the target. Mini Wireless Presenter PLUS is also designed for Windows Media Player®, WinDVD® and PowerDVD® remote control, having your own way to enjoy PC entertainment leisurely and carefree.
Slim, compact and easy to carry
The Mini Wireless Presenter PLUS is a special design of fully integrated remote, its USB dongle is designed slim enough to snap into the main body and fit the whole wireless presenter into the PC card slot of your notebook PC.
Easy to use
The Mini Wireless Presenter PLUS is a USB plug-and-play device with no additional software required.
Equipment Checklist
Carefully unpack your Mini Wireless Presenter PLUS, and keep the packing materials for future reference. Check to make sure you have all the following items:
Mini Wireless Presenter (with USB receiver) 1 CR2032 battery 1 User’s Manual 1
Requirements
5
Fig. 1 Front View
Fig. 2 Rear View
Fig. 3 USB Receiver
6
Take out the USB Receiver Pull up the USB receiver and take out the receiver
Fig. 4
Put back the USB Receiver
Insert the bottom of the USB receiver, label upwards, into the compartment first and press the USB receiver to the compartment. Fig. 5
7
Chapter 3 Getting Started Initial setup the Mini Wireless Presenter PLUS
Step 1: Inserting the batteries
Open the battery cover on the back and insert the battery with the (+) side up. Note: Do not insert battery into the battery chamber in the wrong direction.
Step 2: Connecting the USB receiver
Take out the USB receiver attached on the back and plug it into an available USB port exactly (please refer to page 6).
You may encounter the following conditions with different Operating Systems:
Windows® 98 SE/ME The system will prompt you to insert the operating system CD-ROM and the follow the instruction to install the software required.
Window® 2000/XP The operation system identifies the receiver, prompts ”USB Human Interface Device” and begins installation automatically. Please follow the instruction on the screen to complete the installation procedure.
Step 3: Opening PowerPoint presentation file on your screen Step 4: Turning on the Laser Pointer
Press the “Laser” button for 3 seconds till the mode indicator blinking in orange to activate the Laser function. Note: The laser function will automatically shut off after 30 minutes idle time, and meantime, the laser function will turn off under Multimedia mode, please make sure you are under Presentation mode when using laser pointer.
Step 5: Choosing the operation mode
There are two operation modes for Mini Wireless Presenter PLUS, one is Presentation Mode for PowerPoint, another is Multimedia Modefor Windows Media Player®, PowerDVD® and WinDVD® remote control. (Please refer to page 9 for the mode change)
Note: Default setting isPresentation Mode
8
Using the Mini Wireless Presenter PLUS – Presentation Mode ~ Laser Pointer + PowerPoint Controls ~
Fig. 6
Mode Change mode
Press Mode button, the right-hand Mode indicator lights up and shows you the mode you are in, press Mode button for 1 second to change to next mode sequentially between Presentation, Media Player, PowerDVD and WinDVD. Note: Default setting in Presentation mode, please remember to click any key and check the mode indicator to confirm you are in the right mode you want.
Mode Indicator Indicate the operation mode
No light: PowerPoint Presentation Green light: Media Player application Orange light: PowerDVD application Green and Orange lights: WinDVD application Note: The mode indicator will light up to identify what mode you are in while you press any key.
Laser Shoot the laser Press to shoot the laser beam
Slides Start slide show Click this key to start slide show.
Esc Exit slide show Click this key to exit slide show.
Next Go to next slide Click this key to go to next slide.
Prev. Go to previous slide Click this key to go to previous slide.
Black Turn the presentation screen to black Click this key to turn the whole screen black.
White Turn the presentation screen to white Click this key to turn the whole screen white.
Link ID To change ID
Click the “ID Link” button on the USB dongle first, the “Link Indicator” lights up, and then press “Fast rewind ” and “Slides” buttons simultaneously until the Link Indictor blinks. Note: Implement ID change ONLY when serious RF interference causes the remote control malfunction.
Note: please click any key and check the mode indicator to confirm you are on the right
mode when using. (Default setting is “Presentation Mode”)
10
Using the Mini Wireless Presenter PLUS -- Multimedia Mode ~ For Media Player, PowerDVD and WinDVD Remote Control ~ Fig. 7
11
Open the disc tray Click to open the disc tray.
Play, pause or stop
Click to start or pause playing. Press and hold1 second to stop playing.
Resume playing after pressing STOP
PowerDVD: Click ENTER, select where you want to start, and then press ENTER again
WinDVDClick ENTER starts from the location where you stopped playback.
Windows Media PlayerClick PLAY starts from the beginning of the disc
Full Screen Change the image window size Click to enlarge or contract image window Note: In Windows Media Player mode, change to Full Screen only when playing.
Menu Go to the title menu Click this key to go to the title menu.
Locate a title in the title menu Click this key to move to the upper titles.
Locate a title in the title menu Click this key to move to the lower titles.
Locate a title in the title menu Click this key to move to the right titles.
Locate a title in the title menu Click this key to move to the left titles.
Enter Click to confirm the selected title
Change volume Click this key to mute volume.
Change volume Click this key to turn up volume.
Change volume Click this key to turn down volume.
Go to next chapter Click this key to go to next chapter.
Go to previous chapter Click this key to return to previous chapter.
Fast forward Click this key to speed forward play.
Fast reverse Click this key to speed backward play.
Resume to normal speed after pressing “Fast forward” or “Fast reverse”
PowerDVD and Mac DVD PlayerClick PLAY WinDVDClick ENTER Windows Media PlayerClick “Fast Forward” or “Fast reverse” again.
Note: In Windows Media Player, Menu and Direction buttons( ) are available only when Full Screen.
Note: Please remember to click any key and check the mode indicator to confirm you are on the right mode you want (Please refer to page 9 for changing operation mode)
12
Specifications
System Frequency range: 2400~2483MHz (16 multi channels and 65535 ID channels) Remote range: Approx. 100 feet (30 meters) indoors, 328 (100 meters) feet outdoors Operating voltage: Remote control 2.4V~3.3V, Laser 2.6V~3.3V Power: CR2032 battery * 1 Very low power consumption: Normal operation < 5mA Laser operation < 30mA Sleep < 10uA Output power: Under 1mW
Physical Dimensions Size: 86(l) x 54(w) x 5(h) millimeters Weight: Approx. 23 grams (with the receiver and battery)
Environmental Requirements Temperature: Operating: 0(32)~60(140) Non-operation: -10(14)~65(149) Humidity(non-condensing): Operating: 10%~85% RH Non-operating: 10%~95% RH
Laser Semiconductor laser (λ= 650 nm), emission duration: continuous Laser output power: Max. 0.95mW
Note: Design and specifications are subject to change without notice.
Care and Maintenance For cleaning, you are advised to use a soft, slightly moistened cloth. Avoid using solvents or abrasive substances. Do not open the presenter for maintenance, consult qualified staff only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause
undesired operation.
()
() 1. *1 2. (USB)*1
() 3. CR2032 * 4. *1 () Windows® 98 SE, Me, 2000, XP ()
1.
USB
5. ““
“()
17
(→Windows Media Player→PowerDVD →WinDVD)
PowerPoint Media Player () PowerDVD () WinDVD ()
PowerPoint
PowerPoint
“ “
Slides
18
19
WinDVD Windows Media Player
Windows Media Player Menu ()
“Mode Mode
20
2400~2483MHz 30 100 2.4V~3.3V CR2032 *1 1mW 23 () 86mm()*54mm()*5mm()
0(32)~60(140) -10(14)~65(149)
() 10%~85% RH 10%~95% RH
(λ= 650 nm) 0.95 mW
()