miniflux hp opal gen2 -...
TRANSCRIPT
MINIFLUX HP OPAL gen.2
LINEAR SYSTEM
OUTDOOR
BBOK0910G26WPO
BBOK0910G26NPO
BBOK0920G26WPO
BBOK0920G26NPO
This luminaire contains
built-in LED lamps.
The lamps cannot be
changed in the luminaire.
BBOK09__G26_POIP65max
50˚C
-20˚C
15 W/m
1,0 4,0 / 7,7
11,9 / 23,3
19,7 / 38,8
15,8 / 31,0
7,9 / 15,52,0
3,0
4,0
5,0
O!set(m) Cone width (m) Illuminance(lx)
60
245
27
15
10
1m - Warm White (BBOK0910G04WPO)
For continuous line connection max. 4 m.
Fixing clips (included):
Clip di !ssaggio (incluse):
Per connessioni in linea continua max. 4 m
Caractéristiques Générales Allgemeine Informationen Informazioni generaliGeneral Information Caractéristiques Générales Allgemeine Informationen Informazioni generali
Material Matériaux Materialien Materiali
Number of light sources Nombre de Source(s) Anzahl Lichtquellen Numero sorgenti lum.
Fixing system Système de !xation Befestigungssystem Sistema di !ssaggio
Driver included Driver intégré Treiber inklusive Driver incluso
Protection class IEC Classe électrique Schutzklasse Classe di isolamento
IP code IP Schutzart Grado IP
IK code IK Schlagfestigkeit (IK) Grado IK
Optic type Optique Optik Ottica
Cable Câble Kabel Cavo
Dimmable Gradable Dimmbar Dimmerabile
European Community mark Marquage CE CE-Zeichen Marchio comunità europea
Lifetime to 80% luminous 'ux Durée vie 80% 'ux lumineux Lebensdauer bis 80% Lichtstrom Durata funzion. (80% 'usso)
Weight (kg) Poids (kg) Gewicht (kg) Peso (Kg)
Electrical Caractéristiques Electriques Elektrische Kenndaten Corrente
Input voltage Tension d' alimentation Netzspannung Tensione di alimentazione
Initial performances Performances initiales Performance iniziali
Initial input power Initial input power Systemleistung Potenza di sistema
Initial luminous 'ux Initial luminous 'ux Lichtstrom Flusso luminoso iniziale
Initial LED luminaire e*cacy Initial LED luminaire e*cacy E*zienz Initial LED luminaire e*cacy
Init. Corr. Color Temperature* Init. Corr. Color Temperature* Farbtemperatur* Temperatura colore lampada*
CRI IRC CRI CRI
Application conditions Condizioni applicazione
Ambient temperature range Température ambiante Umgebungstemperatur Temperatura ambiente
Anfängliche Leistung
EinsatzbedingungenConditions d'application
polycarbonate
240 x LED
CLIPS
NO
III
IP65
/
opal
2 m
1-10V / DALI / DMX
CE
30 000 h
0,3 kg (1 m)
24V
15 W/m
905 lm (WW)
60 lm/W
3000 K - 4000 K
94 (4000 K) / 97 (3000 K)
max +50 °C/ min. -20 °C
* Colour temperature could change max. +/- 8%.
(mm)
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_07 - 2017 (K)
27
23
10
30
/20
10
Ø 20
4
LINEAR SYSTEM
OUTDOOR
MINIFLUX HP OPAL gen.2 ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
BBOK09_0G26_PO
-L'installazione deve essere fatta da personale quali�cato.
-Installation should be carried out by a suitable quali�ed installer.
-Non aprire la lampada
-Do not open the luminaire.
-Togliere tensione prima di eseguire operazioni di manutenzione.
-Disconnect main voltage before maintenace operation.
-Tutte le operazioni di cablaggio e manutenzione vanno eseguite con l’interruttore generale in posizione OFF.
-All wiring and maintenance must be performed with the main switch in the OFF position.
GE
NE
RA
LI /
GE
NE
RA
LS
CA
BL
AG
GIO
/ W
IRIN
G
-In caso di guasti, previa autorizzazione al reso di ILTI Luce, il prodotto non dovrà essere aperto, il pressacavo non deve essere smontato e il cavo deve essere tagliato lasciandone almeno 10/15cm.
-In case of failure,upon a return authorization of ILTI LUCE, the product will not have to be opened,the cable gland must not be removed and the cable must be cut leaving at least 10/15cm
- Collegare l'apparecchio all'alimentatore e poi connettere l'alimentatore al 220V.
- Connect the �tting to the feeder and then connect the feeder at 220V.
-E"ettuare il cablaggio usando un sistema che garantisca almeno il grado IP della lampada.
-Make the wiring using a system that guarantees at least the IP grade of the lamp.
Secondo la direttiva comunitaria WEEE (Waste Electrical and Electronic Equipment) l’apparecchio non può essere smaltito con i ri�uti indi"erenziati. Deve essere portato nelle strutture locali per lo smaltimento ed il riciclaggio dei prodotti elettronici.
SM
ALT
IME
NTO
/
DIS
PO
SA
L
In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
Alimentatori/ LED Drivers
WALIM60W24V
WALIMLED020/24
WALIMLED100/24
WALIMLED240/24
WALI/DIMM/JOLLY
Codice/Codenon inclusi/not included
Caratteristiche/Speci!cations
20W - 24V
60W - 24V
100W - 24V
240W - 24V
20W - 24V
WBOKVAR variatore/dimmer 1/10V
WBOKOTDIM dimmer (120wmax)*
* necessita di alimentatore/needs driver* Veri!care la tensione di ingresso supportata dagli alimentatori / Verify the input tension supported from drivers
Esempio di collegamento (connessione in parallelo)Example of connection (parallel connection)
50/60 Hz110V-240V*
Striscia LED - LED strip
30 mm(1 m = 15 W)
+
-
Mini"ux HP opal - 1mt
L
N
Driver 20W24V
15 W/m0,3
kg/mIP65
max
50˚C
-20˚C
L=2mt (sez. 2x1mm2)
sta#a/bracket
27
23
10
30
/20
10
Ø 20-Per collegamento in linea continua, max 4 m.-For continuous line connection, max 4m.
4
(mm)
OUTPUT
24V-DC
Black
junction box(not included)
L
N
INPUT
Red
Tappo di alimentazione/feeding cap
Tappo terminale/end cap
110-240V*
50~60Hz
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your �les
MADE in ITALY_07 - 2017 (M)ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]
LINEAR SYSTEM
OUTDOOR
MINIFLUX HP OPAL gen.2 POLAR DIAGRAM
tabella di riepilogo prodotti/ product overview table
BBOK0910G26WPO
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
codice/
code
colore/
colour
tipo/
type
potenza/
power
caratteristiche/
speci!cations
fascio ottico/
optic beam
ottica/
optictipo di LED/
LED type
materiale/
material
!ssaggio/
!xation
IP/
IP
BBOK0910G26WPO warm whiteesterni/
outdoor15W L= 103cm
schermo opale/
opal screen
orientabile/
adjustable
nastro LED alta emissione/
LED strip high emission
policarbonato/
polycarbonate
con sta!e/
with brackets65
BBOK0920G26WPO warm whiteesterni/
outdoor30W L= 201cm
schermo opale/
opal screen
orientabile/
adjustable
nastro LED alta emissione/
LED strip high emission
policarbonato/
polycarbonate
con sta!e/
with brackets65
BBOK0910G26NPO neutral whiteesterni/
outdoor15W L= 103cm
schermo opale/
opal screen
orientabile/
adjustable
nastro LED alta emissione/
LED strip high emission
policarbonato/
polycarbonate
con sta!e/
with brackets65
BBOK0920G26NPO neutral whiteesterni/
outdoor30W L= 201cm
schermo opale/
opal screen
orientabile/
adjustable
nastro LED alta emissione/
LED strip high emission
policarbonato/
polycarbonate
con sta!e/
with brackets65
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_07 - 2017 (K)