mining world investments
TRANSCRIPT
Mining World Investments
Corner Hennie Alberts &, Rae Frankel St TEL: 011 664 6950 Brackenhurst Mail: [email protected]
Alberton Web: https://miningworldinvestments.com 1448 Company Registration No 2017/211939/07 VAT REG.NO: 9350934189
www.miningworldinvestments.com [email protected] +27 11 664 6950
IDLERS DATA SHEET
Conveyor Idlers - Steel Idler
Steel idlers are designed to have a minimal rim drag, break away mass, bearing misalignment and peripheral run out. This allows the idlers to have a low friction force that extends the life of the conveyor idler and this minimises noise levels.
The low rim drag and break away mass aid in the reduction of electrical consumption on start up and running of the conveyor system. The Seal allows for zero ingress of water and dust, this allows for the maximum protection of the bearing by eliminating contamination of the bearings. The seals are also available in a flame-retardant
and self-extinguishing option.
Shaft end styles available: Closed end, open ends, Jeffry type, threaded and garland type.
Other steel Idlers:
Underground extended shaft idlers and various type of garland sets.
The manufacturing quality of the idlers conform to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
Conveyor Idler - Rubber Impact Idler
Impact idler are manufactured from a high quality rubber. The rubber disc has a Shaw hardness of ± 70. The rubber impact idler is also available in a flame-retardant and self-extinguishing option.
Shaft end styles available:
Closed end, open ends, Jeffry type, threaded and garland type. Various type of rubber impact garland sets.
The manufacturing quality of the idlers conform to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
Conveyor Idlers - Steel Anti-Roll Back Idler
Idlers are designed to have a minimal rim drag, break away mass and bearing misalignment. This allows the idlers to have a low friction force that extends the life of
the conveyor idler. The low rim drag and break away mass aid in the reduction of electrical consumption on start up and running of the conveyor system. Seal allows
for zero ingress of water and dust, this allows for the maximum protection of the bearing by eliminating contamination of the bearings.
Ultra-brake Anti Roll back:
This one directional invention is a standard idler that is equipped with a brake system that prevents the idler from rolling back.
Normally installed on long and steep inclines.
Functions:
• The inner race turns in the forward direction, for normal operation without adding friction. • Should anything happen, that the roller wants to turn back, the inner race wedges itself against the shaft
and the narrow part of the outer race profile, will stop the idler.
Other steel Idlers:
Underground extended shaft idlers and various type of garland sets.
The manufacturing quality of the idlers conforms to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
Conveyor Idlers - HDPE Anti-Roll Back Idler
Idlers are designed to have a minimal rim drag, break away mass and bearing misalignment. This allows the idlers to have a low friction force that extends the life of
the conveyor idler. The low rim drag and break away mass aid in the reduction of electrical consumption on start up and running of the conveyor system. Seal allows for zero ingress of
water and dust, this allows for the maximum protection of the bearing by eliminating contamination of the bearings.
Ultra-brake Anti Roll back:
This one directional invention is a standard idler that is equipped with a brake system that prevents the idler from rolling back. Normally installed on long and steep inclines.
Functions:
• The inner race turns in the forward direction, for normal operation without adding friction.
• Should anything happen, that the roller wants to turn back, the inner race wedges itself against the shaft and the narrow part of the outer race profile, will stop the idler.
Flame-retardant and self-extinguishing:
Manufactures a flame-retardant and self-extinguishing HDPE idler of which the HDPE tube and seals are flame-retardant and self-extinguishing.
Key features of the HDPE Idler:
• The HDPE Idlers are significantly lighter then steel idlers. • The HDPE idlers are more corrosion resistant than steel idlers.
• The HDPE Idlers produces less noise than the steel idler.
• The HDPE idlers have more wear resistance which extends the idler lifespan.
Shaft end styles available:
Closed end, open ends, Jeffry type, threaded and garland type.
Other HDPE Idlers:
Manufactures underground extended shaft idlers and various type of garland sets
The manufacturing quality of the idlers conform to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
Conveyor Idlers - HDPE Troughing Idler
Idlers are designed to have a minimal rim drag, break away mass and bearing misalignment. This allows the idlers to have a low friction force that extends the life of the conveyor idler.
The low rim drag and break away mass aid in the reduction of electrical consumption on start up and running of the conveyor system. Seal allows for zero ingress of
water and dust, this allows for the maximum protection of the bearing by eliminating contamination of the bearings.
Shaft end styles available:
Closed end, open ends, Jeffry type, threaded and garland type.
Other HDPE Idlers:
Manufactures underground extended shaft idlers and various type of garland sets
The manufacturing quality of the idlers conform to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
Conveyor Idlers - HDPE Return Idler
Down Load Specifications
Idlers are designed to have a minimal rim drag, break away mass and bearing misalignment. This allows the idlers to have a low friction force that extends the life of the conveyor idler.
The low rim drag and break away mass aid in the reduction of electrical consumption on start up and running of the conveyor system. Seal allows for zero ingress of water and dust, this allows for the maximum protection of the bearing by eliminating contamination of the bearings.
Shaft end styles available:
www.miningworldinvestments.com [email protected] +27 11 664 6950
Closed end, open ends, Jeffry type, threaded and garland type.
Other HDPE Idlers:
Manufactures underground extended shaft idlers and various type of garland sets
The manufacturing quality of the idlers conform to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950
Conveyor Idlers - HDPE Anti-Roll Back Idler
Idlers are designed to have a minimal rim drag, break away mass and bearing misalignment. This allows the idlers to have a low friction force that extends the life of
the conveyor idler.
The low rim drag and break away mass aid in the reduction of electrical consumption on start up and running of the conveyor system. Seal allows for zero ingress of water and dust, this allows for the maximum protection of the bearing by eliminating contamination of the bearings.
Ultra-brake Anti Roll back:
This one directional invention is a standard idler that is equipped with a brake system that prevents the idler from rolling back.
Normally installed on long and steep inclines.
Functions:
• The inner race turns in the forward direction, for normal operation without adding friction.
• Should anything happen, that the roller wants to turn back, the inner race wedges itself against the shaft
and the narrow part of the outer race profile, will stop the idler.
Flame-retardant and self-extinguishing:
Manufactures a flame-retardant and self-extinguishing HDPE idler of which the HDPE tube and seals are flame-retardant and self-extinguishing.
Key features of the HDPE Idler:
• The HDPE Idlers are significantly lighter then steel idlers.
• The HDPE idlers are more corrosion resistant than steel idlers.
• The HDPE Idlers produces less noise than the steel idler.
• The HDPE idlers has more wear resistance which extends the idler lifespan.
Shaft end styles available:
Closed end, open ends, Jeffry type, threaded and garland type.
Other HDPE Idlers:
Moret Mining manufactures underground extended shaft idlers and various type of garland sets
The manufacturing quality of the idlers conform to the SANS 1313-1/3 specifications.
www.miningworldinvestments.com [email protected] +27 11 664 6950
www.miningworldinvestments.com [email protected] +27 11 664 6950