minor - pompdirect · magnum kw 70 60 50 40 30 20 h n l 0 0 10 20 30 40 50 60 70 90 80 h, m 100 50...
TRANSCRIPT
05
10152025303540
0 5 10 15 20 25 30 35Q (l/s)
012345
N
N
H
H
6
H (m)
P (kW)
MINORwww.grindex.com
ISO 9906/A
50 HzRevision 0 2007.12
2870 kW 3.7 kW 4.5 230 V 13 400 V 7.3 500 V 6.0
Ø 286 mm
793 m
m
Weight: 52 kg
Strainer hole:Ø10 mm
No: PD603-EN
Electrical submersible drainage pump
Pump types N: Normal pressureH: High pressure
ClassificationElectrical submersible pump Protection class: IP68Electrical motorSquirrel cage induction motor Insulation class H (IEC 85)
Technical data Shaft speed rpm Rated output Max. power cons. Rated current A at Other voltages on request
Motor protectorPhase sequence control, phase failure guard, temperature guard with thermal contacts opening temp 140°C, airvalve (= SMART-system)
Power cable SUBCAB:4G2,5mm² , lenght 20m
Shaft sealsCartridge seal with double mechanical face seals with oil compartment between the sealsMaterial lower seal: Tungsten carbide-Tungsten carbideMaterial upper seal: Tungsten carbide-Tungsten carbide
BearingsBall bearing with C3 clearance
Discharge connection
N: 4”, Hose, ISO-G or NPT
H: 3”, Hose, ISO-G or NPT
MaterialsCasted parts Aluminium Outer casing Stainless steel Stator housing AluminiumMotor shaft Stainless steelImpeller High chrome alloyed white cast ironSuction cover High chrome cast ironDiffusers Nitrile rubberScrews and nuts Stainless steelO-rings Nitrile rubber
AccessoriesZink anodes
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 5-8
Specifications can be changed without notice.
Tel. 0294-457712 Fax 0294-457713
0
10
20
30
40
50
0 10 20 30 40Q (l/s)
0
2
4
6
8
H (m)
P (kW)N
N
H
H
MAJORwww.grindex.com
ISO 9906/A
50 HzRevision 0 2007.12
2890 kW 5.6 kW 6.7 230 V 19 400 V 11 500 V 8.7
Ø 286 mm
793 m
m
Weight: 54 kg
Strainer hole:Ø10 mm
No: PD604-EN
Electrical submersible drainage pump
Pump typesN: Normal pressureH: High pressure
ClassificationElectrical submersible pump Protection class: IP68Electrical motorSquirrel cage induction motor Insulation class H (IEC 85)
Technical data Shaft speed rpm Rated output Max. power cons. Rated current A at Other voltages on request
Motor protectorPhase sequence control, phase failure guard, temperature guard with thermal contacts opening temp 140°C (= SMART-system), airvalve
Power cableSUBCAB:4G2,5mm² , lenght 20m
Shaft sealsCartridge seal with double mechanical face seals with oil compartment between the sealsMaterial lower seal: Tungsten carbide-Tungsten carbideMaterial upper seal: Tungsten carbide-Tungsten carbide
BearingsBall bearing with C3 clearance
Discharge connectionN: 4”, Hose, ISO-G or NPTH: 3”, Hose, ISO-G or NPT
MaterialsCasted parts AluminiumOuter casing Stainless steelStator housing AluminiumMotor shaft Stainless steelImpeller High chrome alloyed white cast ironSuction cover High chrome cast ironDiffusers Nitrile rubberScrews and nuts Stainless steelO-rings Nitrile rubber
AccessoriesZink anodes
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 5-8
Specifications can be changed without notice.
Tel. 0294-457712 Fax 0294-457713
0
10
20
30
40
50
60
70
0 10 20 30 40 50 60Q (l/s)
0
5
10
15
H (m)
P (kW)H
H
N
N
Masterwww.grindex.com
ISO 9906/A
50 HzRevision 0 2007.12
2860 kW 10 kW 11.7 230 V 33 400 V 19 500 V 15
Weight: 80 kg
Strainer hole:Ø12 mm
No: PD605-EN
electrical submersible drainage pump
Pump typesN: Normal pressureH: High pressure
ClassificationElectrical submersible pump Protection class: IP68
Electrical motorSquirrel cage induction motor Insulation class H (IEC 85)
Technical dataShaft speed rpm Rated output Max. power cons. Rated current A at Other voltages on request
Motor protectorPhase sequence control, phase failure guard, temperature guard with thermal contacts opening temp 140°C, (= SMART-system), airvalve DOL or star/delta
Power cable - SUBCAB4G 4mm² , lenght 20m
Shaft sealsCartridge seal with double mechanical face seals with oil compartment between the sealsMaterial lower seal: Tungsten carbide-Tungsten carbideMaterial upper seal: Tungsten carbide-Tungsten carbide
BearingsBall bearing with C3 clearance
Discharge connectionN: 6”, Hose, ISO-G or NPTH: 4”, Hose, ISO-G or NPT
MaterialsCasted parts AluminiumOuter casing Stainless steelStator housing AluminiumMotor shaft Stainless steelImpeller High chrome alloyed white cast ironSuction cover High chrome cast ironDiffusers Nitrile rubberScrews and nuts Stainless steelO-rings Nitrile rubber
AccessoriesZink anodes
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 5-8
Specifications can be changed without notice.
Ø 346 mm
832 m
m
Tel. 0294-457712 Fax 0294-457713
rpm 2835 kW 8.8 kW 10.2 230 V 27 400 V 16 500 V 13
60 kg
Ø 8.5 mm
720
mm
495 mm
MASTER SH
No: PD161 Revision 1 2008.05 50 Hz
280 mm 01020304050607080
0 5 10 15 20 25Q (l/s)
0
5
10
15
H (m)
P (kW)
www.grindex.com
ClassificationElectrical submersible pumpProtection class: IP68Max. submersion depth: 20 m
Electrical motorSquirrel cage induction motorInsulation class: F (IEC 85)
Technical dataShaft speed Rated output Max. power cons. Rated current A at Other voltages on request
Motor protectorPhase sequence control, phase failure guard, temperature guard with thermal contacts in the stator (= SMART-system), airvalve, DOL or star/delta
Power cableSUBCAB, length 20 m4G6 mm2, U = 230 V4G2.5 mm2, U > 230 V
Shaft sealsDouble mechanical shaft seals with an oil compartmentbetween the sealsMaterial lower seal: Silicon carbide - silicon carbideMaterial upper seal: Carbon - silicon carbide
BearingsLower: Double angular contact ball bearing with C3 clearanceUpper: Ball bearing with C3 clearance
Discharge connections3”, Hose, ISO-G or NPT
MaterialsCasted parts AluminiumOuter casing Stainless steelMotor shaft Stainless steelImpeller Cr-alloyed white cast ironScrews and nuts Stainless steelDiffusers Polyurethane or nitrile rubber
AccessoriesTandem connectionLow suction collarZinc anodesFloat switch
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3pH of the liquid: 5-8
ISO 9906/A
-EN
Electrical submersible drainage pump
Weight:
Strainer hole:
Tel. 0294-457712 Fax 0294-457713
0
10
20
30
40
50
60
70
0 20 40 60 80 100Q (l/s)
0
5
10
15
20
25
H (m)
P (kW)
H
N
H
N
MATADORwww.grindex.com
2900 kW 18 kW 20 230 V 56 400 V 32 500 V 26
ISO 9906/A
50 HzRevision 0 2007.12
Pump typesN: Normal pressureH: High pressure
ClassificationElectrical submersible pumpProtection class: IP68
Electrical motorSquirrel cage induction motorInsulation class H (IEC 85)
Technical data Shaft speed rpm Rated output Max. power cons. Rated current A at Other voltages on request
Motor protectorPhase sequence control, phase failure guard, temperature guard with thermal contacts opening temp 140°C, (= SMART-system), airvalve DOL or star/delta
Power cable - SUBCAB4G6mm² , lenght 20m - U ≥ 380 V4G10mm² , lenght 20m - U < 380 V
Shaft sealsCartridge seal with double mechanical face seals with oil compartment between the sealsMaterial lower seal: Tungsten carbide-Tungsten carbideMaterial upper seal: Tungsten carbide-Tungsten carbide
BearingsBall bearing with C3 clearance
Discharge connectionN: 6”, Hose, ISO-G or NPTH: 4”, Hose, ISO-G or NPT
MaterialsCasted parts AluminiumOuter casing Stainless steelStator housing Cast ironMotor shaft Stainless steelImpeller High chrome alloyed white cast ironSuction cover High chrome cast ironDiffusers Nitrile rubberScrews and nuts Stainless steelO-rings Nitrile rubber
AccessoriesZink anodes
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 5-8
Specifications can be changed without notice.
Weight: 143 kg
Strainer hole:Ø 12 mm
No: PD606-EN
Electrical submersible drainage pump
Ø 395 mm
954 m
m
Tel. 0294-457712 Fax 0294-457713
Grindex AB Box 538Tel: +46 8 606 66 00 Fax: +46 8 745 53 28e-mail: [email protected] www.grindex.com
SE-136 25 Haninge Sweden
Specifications can bechanged without notice.
Pump typesN: Normal headH: High headL: High flow
ClassificationElectrical submersible pumpProtection class: IP68Max. submersion depth: 20 m
Electrical motorSquirrel cage induction motorInsulation class: F (IEC 85)
Technical data N & H LShaft speed r.p.m. 2900 1450Rated output kW 33 34Max. power cons. kW 40 35Rated current A at 230 V 108 111 400 V 62 64 500 V 50 51Other voltages on request
Motor protectorTemperature guard with thermal contacts in the stator andair valve.This pump must be connectedto an external starter box
Power cableH07RN-F, length 20 m4x35 mm2, U = 230 V, DOL4x25 mm2, U = 230 V, star/delta4x16 mm2, U = 400 - 500 V, DOL4x10 mm2, U = 400 - 500 V, star/delta Pilot cableH07RN-F, length 21 m2x1.5 mm2
Shaft sealsDouble mechanical face seals with an oil compartmentbetween the sealsMaterial lower seal: Corrosion resistant cemented carbide -corrosion resistant cemented carbideMaterial upper seal: Carbon - cemented carbide
BearingsLower: 2 angular contact ball bearings with C3 clearanceUpper: Ball bearing with C3 clearance
Discharge connectionsHose, BSP or NPTN: 8"H: 4"L: 8"
Materials Casted parts Aluminium Outer casing Stainless steel Motor shaft Stainless steel Impeller Cr-alloyed white cast iron Screws and nuts Stainless steel Diffusers Polyurethane
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 5-8
AccessoriesStarter box, DOL or star/deltaTandem connectionZinc anodesNon return valve
The curves have been designed according to ISO 2548C
These items are available on request
0 50 100 150 200 2500
20
40
60
80
H (m) 100
L
Q (l/s)
H
N
15
20
25
30
35
P (kW) 40
LH
N
1345
mm
510 mmWeight: 285 kg
Strainer hole:Ø 12 mm
www.grindex.com
PROLINE
No: PD008
MAXIRevision 3 2004.10
Electrical submersible drainage pump 50 Hz
No: PD009 Revision 05 2008.03 50 Hz
www.grindex.com
MAGNUM
kW 70
60
50
40
30
20
N LH
00
10203040506070
9080
H, m 100
50 100 150 200 250 300 350 l/s
N
L
H
ISO 9906/A750 mm
1475 m
m
Ø 12 mm
540 kg
N & L H 1475 2950 kW 57 57 kW 62 64 400 V 107 98 500 V 85 79
Electrical submersible drainage pump
Pump typesN: Normal headH: High headL: High flow
ClassificationElectrical submersible pumpProtection class: IP68Max. submersion depth: 20 m
Electrical motorSquirrel cage induction motorInsulation class: F (IEC 85)
Technical data Shaft speed r.p.mRated output Max. power cons. Rated current A at
Other voltages on request
Motor protectorTemperature guard with thermal contacts in the stator, leakage sensor, airvalve.
This pump must be connected to an external motor control for DOL or Y/D star/delta start.
Power cableSUBCAB with control cores, length 20 m4G 25+2x1,5 mm2 U = 400 V, DOL4G 16+2x1,5 mm2, U = 500 V, DOL4G 16+2x1,5 mm2, U = 400 V, star/delta4G 10+2x1,5 mm2, U = 500 V, star/delta(External pilot cable is optional)
Shaft sealsDouble mechanical face seals with an oil compartment between the sealsMaterial lower seal: Tungstencarbide-TungstencarbideMaterial upper seal: Tungstencarbide-Tungstencarbide
BearingsLower: Double angular contact ball bearing with C3 clearanceUpper: Ball bearing with C3 clearance
Discharge connectionsHose, ISO-G, NPT or ANSI flangeN: 8”H: 6”L: 10”
MaterialsCasted parts AluminiumOuter casing Stainless steelMotor shaft Stainless steelImpeller Cr-alloyed white cast ironScrews and nuts Stainless steelDiffusers PolyurethaneO-rings Nitrile rubber
LimitationsMax. submersion depth: 20 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 5-8
AccessoriesStarter box, DOL or star/deltaTandem connectionZinc anodes
Specifications can be changed without notice.
Strainer hole:
Weight:
Tel. 0294-457712 Fax 0294-457713
0
40
80
120
160
H (m) 200
0 20 40 60 80 100 120 140 160Q (l/s)
0
20
40
60
80
P (kW) 100
H
N
H
N
www.grindex.com
ISO 9906/A
MEGAElectrical submersible drainage pump
No: PD010-EN Revision 0 2008.09 50 Hz
Pump typesN: Normal headH: High head
ClassificationElectrical submersible pumpProtection class: IP68Max. submersion depth: 75 m
Electrical motorSquirrel cage 3-phase induction motorInsulation class: H (IEC 85)
Technical dataShaft speed rpm 2965Rated output kW 90Max. power cons. kW 95Rated current A at 400 V 148 500 V 117Other voltages on request
Motor protectorTemperature guard with thermal contacts in the stator
Monitoring equipmentPt 100 sensor for main bearing temperature reading
Power cableSUBCAB 4G25+2x1,5SUBCAB 4G35+2x1,5SUBCAB 4G35SUBCAB 4G50SUBCAB 4G70SUBCAB 4AWG/3-2-1-GCSUBCAB 1AWG/3-2-1-GCSUBCAB S3x50+3x25/3+4x1,5SUBCAB S3x70+3x35/3+4x1,5
Shaft sealsDouble mechanical shaft seals with an oil compartmentbetween the seals.Material lower seal: Tungsten carbide - Tungsten carbideMaterial upper seal: Tungsten carbide - Tungsten carbide
BearingsMain bearing: Two single-row angular contact ball bearing.Paired mountedSupport bearing: Cylindrical single-row roller bearing withC3 clearance
Discharge connectionsN: 6” (DN 150) Flange SMS, DIN, BS or ANSIH: 4” (DN 100) Flange SMS, DIN, BS or ANSI
MaterialsCasted parts Cast ironMotor shaft Stainless steelImpeller Cr-alloyed white cast iron or stainless steelScrews and nuts Stainless steelDiffusers Nitrile rubber
AccessoriesZinc anodes
LimitationsMax. submersion depth: 75 mMax. liquid temperature: 40°CMax. liquid density: 1100 kg/m3
pH of the liquid: 6-13
Weight: N= 900 kgH= 985 kg
Strainer holes:10x10 mm
1245 m
m
610 mm
680 mm
Tel. 0294-457712 Fax 0294-457713