DESCRIPTIONThe auxiliary transfer switch contact kit allows a single large electrical load to be locked out from generator operation. If a home is equipped with electrical heat or multiple central air conditioning units, this device allows the generator transfer switch to interrupt the control wire, breaking the signal needed for the appliance to turn on.

INSTALLATION INFORMATION• Onceinstalled,thecontrolwiremustberunfromtheapplianceto

the transfer switch to connect to the contact.

DESCRIPTIONThe fascia base wrap snaps together around the bottom the new air cooled generators. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base.

Please note that this wrap only fits air-cooled generators manufactured after 4/2008 that have the contoured body wrap style and are only available in grey.

STANDBY GENERATOR ACCESSORIES

Miscellaneous Accessory Kits

Air-Cooled Generator Sets

Auxiliary Transfer Switch Contact Kit Fascia Base Wrap Kit

Model 5621 Model 5666

Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • generac.com©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177550SBY/Printed in U.S.A. 04.08, rev. 05.08

STANDBY GENERATOR ACCESSORIES

Miscellaneous Accessory Kits

Air-Cooled Generator Sets

Base Plug Kits Paint Kits

Model 5652Model 5651

Model 5653Model 5654Model 5703Model 5704

Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • generac.com©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177550SBY/Printed in U.S.A. 04.08, rev. 05.08

DESCRIPTION: The base plug kit offers an easy way to fill the lifting holes present in the base of the generators. In the air-cooled product this offers rodent and insect protection which could potentially be an issue during service intervals. In liquid cooled product, it completes the look of a finished base for a sleek, streamlined appearance.

Please note that the base plug kit (5652) for the air-cooled product only fits air-cooled units manufactured prior to 4/2008 that do not have the contoured body wrap style.

DESCRIPTION: The enclosure is the generator's first line of defense against the elements and is important to keep in good condition. If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion. These paint kits include the necessary paint to properly maintain or touch up a generator enclosure.

Please check with your sales representative to verify proper color coordination.

5653 Tan Kit – Generators manufactured prior to 4/2008 without contoured body style.

5654 Grey Kit – Generators manufactured prior to 4/2008 without contoured body style.

5703 Bisque Kit – Generators manufactured after 4/2008 with contoured body style.

5704 Medium Grey Kit – Generators manufactured after 4/2008 with contoured body style.