1

Project Record

Since February 2012 to May 2015

WELDING

Welding Procedure

As per ASME Section IX

19 numbers of WPS/PQR prepared for No (1) Steel Mill MyinGyan with DENIELI (Italy). 2 numbers of WPS/PQR prepared for UNITEAM TRAINING LIMITED. (WELDING AND MACHINE

DEPARTMENT) 1 number of WPS/PQR reviewed for Max Myanmar Tank Farm Project, contractor by Mindhama Co.,

Ltd.

Welder Training and Certification

2G, 3G, 4G, 6G (FCAW, SMAW, GTAW) 97 nosWelder Certificates for No(1) Steel Mill MyinGyanfpr

DENIELI , ITALY.

10 Welder qualification for PEC Sigapore/Myanmar (Project in Ahlone Power by Toyo Thai act as SGS.

6G (SMAW, GTAW) 12 nos Welder Trainings and Certification as per ASME IX for Aung Pan Myaing Co.,Ltd, for SMAW.

6G & 4G (SMAW) 5 nos Welder training & Certification for STI Engineering Group Co.,Ltd. as per ASME

IX qualification and complement with job knowledge of DIN .EN.287.

5G (Down hill) 40 number of welder certification for MOGE Thekata.

Welder and fitter supply for PT Gunanusa at MOGE Thaketa Compound DECEMBER 2014.

21 Welder tested for Uniteam Training Limited AWS SENSE certification by American Welding Society

as a Third Party Inspection.

INSPECTION

API-510 Pressure Vessel In-Service Inspection & API-570 Piping Inspection and Third Party/Company

Site Representative for Maintenance Painting Campaign at Yetagon offshore PETRONAS Myanmar at

2012.

2

For TOTAL E&P (Myanmar), define and develop the appropriate inspection strategies for equipments in

compliance with Company General Specification as per GS-EP-EXP-311. Develop the Risk Based

Inspection (RBI) study using the FAME+ COMPANY software. Prepare individual Written Scheme of

Examination (WSE) per equipment. Prepare and perform baseline inspections.

Authorized Representative of German Welding Institute (SLV-Halle), which is Authorized Notified body

by International Institute of Welding (IIW).

Consultant for SGS Ltd, Myanmar, Pacific High-Tech Co., Ltd for inspection related business.

Company Site Representative (CSR) for 3rd Major Blasting & Painting Campaign of Yetagon Platform at

PETRONAS Carigali (Myanmar) and API 510 pressure vessel Inspection on Glycol Reboiler at November

2012 to March 2013.

An Out of Service condition assessment survey on Above Ground storage tank as per API 653 for Oil

Search Limited (Australia) at Papua New Guinea, act as BV Australia.

Proof Load Test MPI on lifting equipment of Cargo Unit and Blasting Pot at Regards Engineering Co.,

Ltd, December 2012.

In progress of Structure Welding inspection and painting inspection at Total Nov 2014 to May 2015.

In progress of quality monitoring for piping and welder qualification and reviewing welding procedure

at Heineken Project November 2014 to May 2015.

Plant Inspection for Ywama Pipeline center and Daw Nyein Pipeline center.

Ultrasonic Testing for piping (MOGE- Kanbauk) Project.

Mechanical Tests and Corrosion test for duplex, dissimilar material weld joints of plate and pipe test

coupons for Total Myanmar SIP Project.

Hydrotest on A 53 DN300x7mm, DN200X5.15mm, DN150x5.15mm line pipes of API 5L pipe for Hakah

Water Distribution Project Myanmar Ahla Construction Engineering & Trading company limited.

NDT (Non-Destructive-Testing) PC 250 Crane Inspection NDT for Tioman T9-SKD Drilling ZAWTIKA WP2 offshore at PTTEP, Oct

2013.

Eddy current inspection NDT and coordination in Lifting Equipment Inspection campaign, Pipeline and piping Inspection (Visual and UT) for TOTAL E&P (Myanmar), Nov 2013.

3

20 Domestic Gas Pipelines NDT inspection for YWAMA Power Plant, MOGE Nov 2013.

Prepared Hardness testing, PWHT procedures. Inspection of Ultrasonic Testing and Hardness Testing

on subsea pipelines fittings and welds on pipe laying barge HD 2500 for SHWE Project at DAEWOO

INTERNATIONAL.

NDT (MT & VT) on 200T Fall Hook of Pedestal Crane for SKD drilling, T9 tandem bange.

NDT (MT/PT) during Load Test of Six monthly Lifting Equipment Inspection campaign for TOTAL

MYANMAR E&P.

X-ray test on piping for Power Plant GE at Kyauk Se X-ray test on 70000 Gallon Storage tanks for IRRIGATION CANEL DEPARTMENT, MEIKHTILA. X-ray test and Ultrasonic test on 20 pipelines for Ywama Gas Plant.(Power Plant) Gas Pipeline. X-ray test on steel mill no.1 Myin Gyan with DANIEI ENGINEERING (ITALY) SINCE AUGUST 2013 TILL

NOW FOR PIPING & PRESSURE VESSEL AS PER ASME VIII & ASME B 31.3.

X-ray test and Ultrasonic Test on drilling Pipes at WP2, ZAWTIKA PTTEP, Drilling Barge, T9 Sapura Kecana Drilling.

X-ray and Ultrasonic test on piping and storage tank for Asia World Tank project, THILAWA at March 2014.

Ultrasonic Test for 6 Gas Pipe Line Project For Zeya Co., Ltd. At Hlaw Kar Power Plant.

Penetrant Test for Daewoo Amera Hotel Project at 6 mile, Pyay Road.

QA/QC test for welding pipes and X-Rays Test MOGE Thakata .

NDT Inspection for CISP(Total) project for PT Gunanusa at Thakata MOGE compound.

Ultrasonic testing for MOGE Pipe line at Tharboung Pathein.

Ultrasonic Testing for Diesel Storage tank inspection at PETRONAS office compound.

Infrared thermometer scanning survey for Mechanical and Electrical Equipment of Pectronas Myanmar

offshore, onshore, head office facilities.

FABRICATION AND INSTALLATION

Fabrication and welding on Seismic Impact Project structure for TOTAL Myanmar.

Fabrication and installation, welding of Heineken beer plant in Myanmar.

Fabrication and welding of piping in Myin Gyan Power Plant.

Insulation installation for power boiler piping, process piping and pressure vessels for Heineken project

in Myanmar.

4

Insulation installation for process piping in Zawtika offshore, PTTEPI.

DRAWING & DESIGN

3 D solid work drawing for Total, Yadanar Platforms.

Design work for Natural Gas, Protane, Oxygen and compressed air for Toyo Battery as per ASME B

31.3 with Auto Cad & Spoolgen.

TECHNICAL TRAINING Public training course QA/QC inspector training (including Inspection Engineer from Maintenance

Supervisor From PTERONAS Myanmar & TOTAL E&P Myanmar as participant).

Provide Trainer service in public training course API-570 In-service Inspection of Process Piping in

Malaysia at IDC Plant Technology Sdn, Bhd.

IIW (International Institute of Welding)s Manufacturer Certification Scheme (MCS) training for Quality

Management including. Welders training, NDT trainings in Welded Fabrication Shop of Black Pearl

Enterprise Yangon, Myanmar for Implementation of ISO 3834.

Involved as lecturer in Occupational Health and Safety course (Pressure Equipment Safety Subject) for

Domestic Industries and plants organized Ministry of Labor, Myanmar July 2012. In Pressure

Equipment

Subject, the topics are covered on Pressure Vessel, Process Piping, Pressure Safety Valve, Corrosion, ISO 9001,14001,OSHAS 18001.

Provide Public training course API-510In-service Inspection of Pressure Vessel , API-570 In service

Inspection of Process Piping and API 576 In-service Inspection for Pressure Relieving Devices

Provide public courses ASME IX simplified (Welding / Welder Qualification) ASME VIII simplified

(Pressure vessel fabrication)

Provide public training courses Basic Instrumentation, Pump/Valves & Piping and Instrumentation

Diagram, Pipe Stress Analysis, Industrial Hydraulic, Pressure Safety Valve, Technical Report writing,

safety Training such as work permit, work at height, first aid.

Provide public training for Non-Destructive-Test in MT/PT/UT Provide public courses ASME IX simplified (Welding/Welder Qualification) ASME VIII simplified

(Pressure vessel fabrication)

5

Conducted Non Destructive Testing (Magnetic Particle test, Dyne Penetrate test, Ultrasonic test)

training for inspection Engineers of TOTAL E&P (Myanmar) as per ASNT-SNT-TC-IA standard on Feb of

2014.

International Welding Engineer service in Transition plate to jacket leg welding/ heat treatment in

SHWE Field Development Project (Offshore Installation), Dec 2012 Myanmar.

Proof Load Test and MPI of lifting equipment on Air Compressor Unit and Wire Rope Sling with Soft

Eyes, 4 FT Container A, Sling & Shackles for Container, Tool Box A and Tool Box B at Pacific High Tech

Engineering, February 2013 for project at Petronas Myanmar.

Appreciation of NDT Training (PTTEP) .

Ultrasonic Testing Level II training for Mindhama Company and SMI Industry Oct 2014.

Welding Inspector Public Course from16th Feb to 20th Feb 2015 in Yangon.

PRESENTATION

Introduction of NACE corrosion organization and its courses to Myanmar Oil & Gas Industries,

Myanmar Engineering Society and Ministry of Labor, Myanmar August 2012.

Present Paper in 7th Asia Pacific International Institute of welding (IIW) Congress in Singapore on 2013

with Myanmar Future with welding on behalf of Myanmar Engineering Society. It is about How

Myanmar Welding Industry can upgrade and connect to Global supply Chain.

Presented of Welding Education with German Welding Institute, SLV-Halle in Myanmar Engineering

Society.

Presented at Myanmar Engineering Society for ISO standard for welding & International Institute of

welding.

Presented at National Museum for Project Quality Management with MOGSS (22 Feb 2015).

Speaker in 2nd Oil & Gas Exhibition & Conference in Shangrilar Hotel for Developing Myanmar Locals.

(20 May 2015)

INVOLVED IN

6

In Myanmar Engineering Society, Participate in Myanmar Welding Engineering Development

Committee, as a member.

In NSSA (National Skill Standard Association) involved in Welding Technical Committee.

Involved in (ASIAN WELDING FEDRATION) as a member of expert panel for welding procedure Task Force.