mitee-grip - progerproger spantechniek bv - hillegom - telefoon (0252) 524544 - e-mail:...

Proger Spantechniek BV - Hillegom - telefoon (0252) 524544 - E-mail: [email protected] - www.proger.nl 10-17 21 Mitee-Grip ™ How to Hold a Workpiece When You Can’t Use a Clamp Mitee-Grip ™ is a heat activated wax based compound embedded in precision paper, coated on nylon mesh or in a stick form. This holding media maintains parallelism on precision parts. It is very useful for thin parts, micro machining, optical and quartz components, and jewelry related items. Approximate holding force 40 PSI. Part No. Desc. Size (Metric) 10240 Paper Roll 12”x5’ (305x1524) 10245 Paper Roll 12”x25’ (305x7620) 10250 Mesh Roll 10”x5’ (254x1524) 10252 Mesh Roll 10”x25’ (254x7620) 10230 Compound 1 Stick 10235 Compound 3 Sticks 1 Place the Mitee-Grip™ sheet on the subplate leaving a 1/4" (6mm) border on all sides, or melt stick on warm subplate 4 Use air or water to cool, being careful to prevent water from going between subplate and workpiece while hot. 2 In some cases the part should be lightly clamped to prevent movement. NOTE: Over thin workpieces use a top plate for even pressure. 5 Part is ready, use coolant while machining. Reheat to remove. We have found an ultrasonic cleaner is best to remove wax residue or simply wipe part while warm using alcohol based cleaner. 3 225°F (107°C) is application temperature and fully liquid, 186°F (85°C) is solid and becoming liquid. Some customers use an oven and record time and temp once determined by experimentation. A hot plate may also be used at higher temps if monitored. Most parts will “float” when the Mitee-Grip™ has liquefied. The mesh product captures additional wax material in the web and aides in holding irregular shape parts. Typically additional holding force can be attained with this material. The original paper product is excellent for holding smooth flat parts and maintaining parallelism. The stick form material can be used in shallow cavities for holding concave and convex pieces. It will also stabilize delicate parts during machining.

Upload: others

Post on 17-May-2020

3 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Proger Spantechniek BV - Hillegom - telefoon (0252) 524544 - E-mail: [email protected] - www.proger.nl 10-17

Mitee-Grip™

how to hold a Workpiece When You can’t Use a clamp

Mitee-Grip™ is a heat activated wax based compound embedded in precision paper, coated on nylon mesh or in a stick form. This holding media maintains parallelism on precision parts. It is very useful for thin parts, micro machining, optical and quartz components, and jewelry related items. Approximate holding force 40 PSI.

Part No. Desc. Size (Metric)

10240 Paper Roll 12”x5’ (305x1524)10245 Paper Roll 12”x25’ (305x7620)10250 Mesh Roll 10”x5’ (254x1524)10252 Mesh Roll 10”x25’ (254x7620)10230 Compound 1 Stick10235 Compound 3 Sticks

1Place the Mitee-Grip™ sheet on the subplate leaving a 1/4" (6mm)

border on all sides, or melt stick on warm subplate

4 Use air or water to cool, being careful to prevent water from going

between subplate and workpiece while hot.

2 In some cases the part should be lightly clamped to prevent

movement. NOTE: Over thin workpieces use a top plate for even pressure.

5 Part is ready, use coolant while machining. Reheat to remove. We

have found an ultrasonic cleaner is best to remove wax residue or simply wipe part while warm using alcohol based cleaner.

3 225°F (107°C) is application temperature and fully liquid, 186°F

(85°C) is solid and becoming liquid. Some customers use an oven and record time and temp once determined by experimentation. A hot plate may also be used at higher temps if monitored. Most parts will “float” when the Mitee-Grip™ has liquefied.

The mesh product captures additional wax material in the web and aides in

holding irregular shape parts. Typically additional holding force can

be attained with this material.

The original paper product is excellent for holding smooth flat parts

and maintaining parallelism.

The stick form material can be used in shallow cavities for holding concave and convex pieces. It will also stabilize

delicate parts during machining.

MB 2017 CATALOG - FINAL.indd 23 10/19/2017 11:38:58 AM

Scan QR code to see more

application images

Dennis Van Kessel - CNC Solution

Savi Beeson - Instagram Dillan King - Instagram