mixed compost mrf / srf trommel fines glass · pdf filemrf / srf trommel fines glass mixed ......
TRANSCRIPT
Specifications
Modelled on a classic three-way split recycling screen, the Proflow DST combines effective flip-flow screening with air density
separation. The tracked, diesel/electric driven unit is aimed at a wide variety of mixed waste applications and can be tailored
to suit specific materials and product needs.
Features and benefits
86kW IVECO NEF45TM2 water cooled diesel generator (100kVA
output)
Independent drive Proflow double deck flip-flop screen. Screening area
of 4.3m x 1.5m (14’ x 5’) on the top and bottom decks.
4.5m cubic capacity feed hopper
Touch panel controls
Multiple discharge configurations
Machine weight: 21 tonnes *Standard configuration
Working Dimensions:
FLIP-FLOW SCREENING Flip Flow screens are designed to effectively screen difficult e.g. sticky or
wet material to an infinite variety of sizes and are highly effective for the
processing of skip waste fines, trommel fines, compost, aggregate or
waste wood processing.
Built to a high standard, the Proflow flip-flow screen offers an essential
pre-treatment to material before being offered to the density separator
Independent drive allows maximum
agitation of material and prevents
blockage.
Proflow screens are made up of two separate decks in one unit that
are independently driven as opposed to the traditional method of
having the lower deck suspended on rubber mounts. This method
ensures maximum agitation of material and prevents the bottom deck
being weighed down, thus preventing blockages and keeping
production to a maximum.
AIR/DENSITY SEPARATION EPS Ltd utilise a variety of well established and innovative methods to
separate mixed waste materials into light and heavy fractions.
Depending on the relative densities and sizing of the material either
air density separation, suction or a combination of both is used to
ensure a consistent and high production separation is achieved.
Optional Extras
Head drum magnets on product conveyors
Secondary lights suction on product conveyors .
Compost/Biowaste configuration (15kw suction on
lights, chevron feed belt, accelerated fines
discharge)
Different stockpile conveyor layouts
Mains 3-phase power option
Multiple product conveyor configurations
Full dust covers
Galvanised walkways
Applications
“We appreciate that every customers material is different. With this in mind we will always strive to bring
a mobile unit to site and demonstrate what materials can be recovered from your waste fines stream”
The Proflow DST is an ideal solution to a wide variety of mixed waste applications and can, with the addition of optional extras
be easily adapted to meet very specific product demands, meaning material can be loaded into the mobile unit and separated
into recoverable fractions in one process.
Trommel Fines
Remove combustible element to achieve –10% loss on ignition to qualify for lower landfill tax rate.
Retrieve fines, aggregate and ferrous fractions
Process stockpiled backlog material with one machine
FINES HEAVIES LIGHTS METALS TROMMEL FINES
Landfill Reclamation
Ideal unit to tackle difficult excavated waste to
separate fines, heavys and lights for further
sorting
Mobile, heavy duty unit.
MRF Fines and Glass Recycling
Separate glass element from plastic and lights
fraction to produce MRF glass for re-melt and high
quality glass aggregate.
Extremely low wear compared to alternative
methods such as zig-zag air separators
Remove glass dust and grit
Compost and Street Sweepings
Pre-Screen without blockages to produce desired products and separate
paper, plastic, rubbish and stone in one process.
Replace expensive and wear intensive static star screen set-ups
The Proflow Bio mobile unit is aimed primarily at applications
where a high degree of selectibility is required. The versatile
mobile unit is ideal for applications where the desired light
fraction is very close in density and weight to the desired clean
product such as removing paper and plastic from organic waste
or compost.
The unit utilises density separation, suction, conveyor
displacement and magnet separation to produce high
specification results in one pass.
FEED Contaminated green waste
AIR DISPLACEMENT
CONVEYOR DISPLACEMENT
OUTPUT
COMPOST HEAVIES: STONE, METALS, ETC LIGHTS: PAPER, PLASTICS, ETC
Benefits and features
86kW IVECO NEF45TM2 water cooled diesel generator
(100kVA output)
Touch panel controls
Multiple discharge configurations
Single drum air density separator
15kw Laminar air flow fan to adjustable 1500mm wide
nozzle
15kw Paddle suction fan onlights discharge
Adjustable speed and angle displacement belt
CONTACT EPS LTD ON: 01785 282 323
Email: [email protected]
www.environmentalprocessing.co.uk
www.finlaygroup.com
Head Office
Finlay Group
Lakeside House
Ladford Covert Ind Estate
Seighford
Stafford
ST18 9QL
Southern Office
Unit 3
Grange farm Ind Estate
Babraham Road
Fulbourn
Cambridge
CB21 7XH