mlc, 2006, stcw 2010 and competence management · 2018. 4. 5. · systems (ecdis). • training in...
TRANSCRIPT
MLC, 2006, STCW 2010 and Competence Management
Gordon Halsey
A “Perfect Storm” or Performance Opportunity? Bridging the Gap Between Training for Certification and Capability
ySeptember, 2012
MLC, 2006 – 1.3 Training and Qualifications
Do seafarers have to be trained in personal safety?Yes No It
depends
Do seafarers have to meet STCW requirements?
Do MLC 1 3 req irements appl to seafarers/d ties Do MLC 1.3 requirements apply to seafarers/duties not covered by STCW?
“Depends on the relevant national requirements for seafarers for the work theDepends on the relevant national requirements for seafarers for the work the seafarer is to perform on board a ship. The shipowner is required to ensure that personnel meet relevant national standards.” (ILO MLC, 2006 FAQs online revised edition 2012)
So should shipowners only focus on the training requirements listed above?
Depends on if meeting generic standards is sufficient toi k ifi t h hi / t / hi / i t
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
manage risks specific to each ship/system/machine/equipment
2
1972 Datsun 510 vs. 2012 Nissan Sentra
40 years of technology…So what’s different?
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
3
So what s different?
Operation in the “wheelhouse”? Compare…
← ’72 Datsun 510← 72 Datsun 510
‘12 Nissan Sentra →
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
4
I’ve got a license to drive…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
5
Let’s look under the hood…the ’72 Datsun 510
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
6
Let’s look under the hood…the ’12 Nissan Sentra
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
7
Troubleshooting and repair? Compare…
← ’72 Datsun 510← 72 Datsun 510
‘12 Nissan Sentra →
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
8
Maintenance? Compare…
← ’72 Datsun 510← 72 Datsun 510
‘12 Sentra →
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
9
I’m licensed to…The National Institute for Automotive Service Excellence (ASE) works to improve the quality of vehicle repair and service by testing and certifying
automotive professionals This nationwide organization was founded in 1972automotive professionals. This nationwide organization was founded in 1972.
Must pass all eight of the automotive certification tests and have the required
work experience
“The older I get the harder it is to pass the recertification exams. Automotive
technology and the auto repair businessare advancing faster than my training
sessions ”
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
10
sessions.
But for what make and model?…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
11
Maritime application – in the wheelhouse…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
12
Maritime application - in the ECR…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
13
Competency situations of concern…Human/technology interface:
- Existing equipment, new seafarers…- New equipment, existing seafarers…- New equipment, new seafarers…
I d b id e.g., Integrated bridge systems…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
14
Machinery and equipment…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
15
Engine control systems…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
16
Digital/electronic monitoring and control systems…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
17
Troubleshooting, diagnostics and repair…
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
18
New STCW requirements address these areas…Some of the new STCW requirements…• Training in leadership, managerial skills and teamwork, including deck and
engine resource management.g g• Training in modern technology such as electronic charts and information
systems (ECDIS). • Training in construction and operation principles of main and aux. machinery, g p p p y,
pumps and piping systems, electrical and electronic systems, and associated control systems (including automatic controls and safety systems)
• Training in maintenance and repair (including planned and emergency/temporary repairs, and trouble-shooting of electrical and electronic control equipment).
• Ability to use drawings, instructions and operating manuals included.• Engine department certification may be propulsion system-specific.• Training and certification for electro-technical officers and ratings. • New certification requirements for able seafarers (deck and engine).
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
19
Competency situations of concern…Seafarers: (e.g., cadets, new hires, transfers, returning after vacation)
- new to industry- new to company- new to ship
Less “hands-on” familiarization/training timeMore dependence on instruments“Push-button” mentality (smart phonesPush-button mentality (smart phones,
xboxes, playstations)
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
20
Competency situations of concern…Technology (e.g., ECDIS, digital/electronic monitoring and control systems)
- new to industry- new to company
t hi- new to ship
- Increasing complexity, computerization, automation; - Focus on “watching the screen” and “pushing the buttons”
Di t i f ti l h i l ti f i t & hi- Distancing from practical physical operation of equipment & machinery- Increased dependence on shore-side “experts” to deal with any anomalies
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
21
Competency situations of concern…
Capability development - non-standard operation (breakdown/emergency)
“behind the controls” understanding,inspection, troubleshooting, diagnosis, b kd i t d ibreakdown response, maintenance and repair
Documentation - – availability, accuracy; equipment vs. systems;
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
22
normal operation vs. emergency operation vs. troubleshooting/maintenance/repair
STCW…the Company is responsible for identifying and addressing individual ship familiarization requirements…
R i d f C i t f ili i ti f h & d t t i i i l Required for Companies to ensure familiarization, refresher & update training, incl.:
“seafarers, on being assigned to any of its ships, are familiarized with their specific duties and with all ship arrangements, installations, equipment, procedures and hi h t i ti th t l t t th i ti d ti ”ship characteristics that are relevant to their routine or emergency duties”
Seafarers assigned specific duties & responsibilities on ro-ro pax ships shall have completed familiarization training to attain the abilities that are appropriate to the
it t b fill d d d ti d ibiliti t b t k
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
23
capacity to be filled and duties and responsibilities to be taken up…
Need to identify critical equipment/systems/operations…
…documentation, key competencies, effective familiarization/training, monitoring…system to match qualified/capable people tosystem to match qualified/capable people tospecific ships/equipment/systems/operations
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
24
Effectively addressing the Human Element…
P l h
~ 60%Personnel who are
Certified, Licensed, Qualified, Competent, and Capable as necessaryFor the specific machinery, equipment, controls and systems they may use
In all situations (normal, abnormal, emergency, troubleshooting, repair, inspection, maintenance, testing)
All are required for effective, safe and environmentally friendly operationOf any business
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
25
Of any business
Safeguarding life, property d th i tand the environment
www.dnv.com
© Det Norske Veritas. All rights reserved.
Split Pins and Set Screwsa to Automated Everything
September, 2012
26