mobile systems division product range - ap ltd. introduction parker hannifin corporation mobile...

PRODUCT RANGEMobile Systems Division

MobileHydraulics

Index

Parker Hannifin CorporationMobile Systems DivisionLincolnshire, IL 60069Mobile Hydraulics

Product RangeDescription Page No.Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

PumpsFixed Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Motors/Pumps

Fixed Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

MotorsFixed Displacement/Low Speed High Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

MotorsVariable Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

PumpsVariable Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Remote Control SystemsElectro-hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Pneumatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Hydraguide™ Hydrostatic Steering Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Directional Control ValvesConstant Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Constant Pressure & Constant Pressure Unloaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Load Sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Threaded Cartridge Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Auxiliary Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Integrated Hydraulic Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Accumulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Fluid Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Parker Hannifin Corporation

To return to the Index click on the Parker logo

© Copyright 1998, Parker Hannifin Corporation. All rights reserved.Hydraguide is a trademark of the Parker Hannifin Corporation. Specifications subject to change without notice.

1

Introduction

Parker Hannifin CorporationMobile Systems DivisionLincolnshire, IL 60069

The Parker Promise

Our commitment to global leadership in mobilehydraulics stems from our desire to offer you,our customers, the finest quality fluid powercomponents in the industry today. The additionof FPS products to the already extensivefamily of established brand names of VOAC,HPI, Nichols, Ross, Waterman and others,allows Parker Hannifin to provide one of themost extensive product lines in mobile fluidpower.

In North America, we have formed a Marketingand Sales organization complete with aSystems Engineering Center strictly focusedon the Mobile Market. All of our worldwideresources are available to you for this highlyspecialized market through this MobileSystems Division. We are ready to advise youand can fill most of your component needswith our vast array of products ranging frompumps to valves, motors to rotary actuators,accumulators to a wide selection of othercomplimentary fluid power products.

Having the right solution for your mobileapplication is only a portion of our commitmentto serving our customers. Capable peopleand never ending service are an integral partof our promise to you. Parker hasmanufacturing plants and warehousesthroughout the world, as well as service,application support and knowledgeable salespersonnel that are ready, willing and able tohelp you with your mobile hydraulic needs.

The Mobile Systems Division is structured tosupply the mobile equipment industry with thetypes of solutions that you, our customer, wantand need. Give us the opportunity to proveour commitment to you by considering Parkersolutions for your next application.

After you’ve reviewed the following catalog,please give us a call or contact your localmobile distributor.

2

• Pressures up to 5000 psi• High power capability• Twin Flow version available• Very low weight• High self-priming speed• Easy to install• Easy to service

Pumps FixedDisplacement


Frame size F1/F2Displacement [cm3/rev]

[in3/rev]Max continuous pressure [psi]Max self-priming speed* [rpm]

*at 15 psi abs. inlet pressure

-2019.01.1650002600

-3028.11.7150002500

-4038.72.3650002400

-6058.23.5550002100

-8078.24.7750001300

-110110.16.7250001300

-53/5354/64

3.30/3.3050001400

-70/3569/36

4.21/2.2050001400

F1/F2

• Pressure loaded design• Efficient, simple design• Exceptionally compact and lightweight• Efficient at high pressure operation• Resistant to cavitation effects• Reliable under cold weather operation• Multi-fluid compatibility

Frame size DDisplacement [cm3/rev]

[in3/rev]Max continuous pressure [psi]

Max operating speed [rpm]

-051.870.11425004000

-072.760.16825004000

-093.450.21025004000

-114.290.26225004000

-145.380.32925004000

-176.620.40425004000

-228.550.52225004000

-2710.500.64120004000

D

• Pressure loaded design• Efficient, simple design• Exceptionally compact and lightweight• Efficient at high pressure operation• Resistant to cavitation effects• Reliable under cold weather operation• Multi-fluid compatibility• Circuits for steering applications

Frame size HDisplacement [cm3/rev]



-259.880.60325004000

-3112.350.75425004000

-3915.440.94225004000

-4919.301.17825004000

-6224.141.47325004000

-7730.181.84220004000

-9036.502.22717504000

H

Mobile Hydraulics

F2

3



• Pressure loaded design• Efficient, simple design• Exceptionally compact and lightweight• Efficient at high pressure operation• Resistant to cavitation effects• Reliable under cold weather operation• Multi-fluid compatibility

Frame size MDisplacement [cm3/rev]



-0935.172.14625003000

-1143.962.68322503000

-1454.953.35320002500

M

• 10 and 12 vane cartridge design• Cartridge style design• High operating speeds• Efficient, simple design• Low noise levels• Hydraulically balanced design• Single and tandem configurations

Frame size PFVH/PFVI25Displacement [cm3/rev]



-12402.4

30002700

-14452.8

30002700

-17553.4

30002500

-19603.7

30002500

-21684.1

30002500

PFVH/PFVI25





-21694.2

30002500

-25825.0

30002500

-30986.0

30002500

-351136.9

30002400

-381227.4

30002400

PFVH/PFVI35

Mobile Hydraulics

4


Motors/Pumps FixedDisplacement



PFVH/PFVI45

• Very high motor operating speeds• Pressures up to 6000 psi• Efficient (low losses)• Accept high external shaft loads• Good resistance to vibrations and temperature shocks• Proven reliability• Easy to service

Frame size F11Displacement [cm3/rev]


Max operating speed* [rpm]*Functioning as motor

-054.880.30500012000

-109.840.60500010000

-1919.01.1650007500

-28**28.11.7150006500

-39**38.72.3650005200

-58**58.23.5550004500

-78**78.24.7750003500

-110**110.06.7150003300

-150150.09.1550003000

-250242.014.8050002700




-421388.5

25002200

-471549.4

25002200

-501629.9

25002200

-5718311.225002200

-6019311.825002200

F11

• Very high motor operating speeds• Pressures up to 7000 psi• High starting torque• Very high power capability• High overall efficiency• Small envelope size

• Motor and pump versions available• Accessory valves available• ISO, SAE and cartridge versions available• Proven reliability• Easy to service• Super-shockless swing relief valve

Frame size F12Displacement [cm3/rev]


Max operating speed* [rpm]*Functioning as motor

-3030.01.8360007100

-4040.02.4460006400

-6059.83.6560005600

-8080.44.9060005200

-110110.16.7260004700

F12

**Will be phased out and replacedby the equivalent F12 size.

Mobile Hydraulics

5

Motors/Pumps FixedDisplacement


• High operating pressures• Rugged housing assembly• Special seal technology• Very high efficiencies• Long life “DU” Teflon bushings• Reversible motors with external case drain are standard

Frame size MZG1A/PZG1ADisplacement [cm3/rev]



-0131.30.0836006000

-0202.00.1236006000

-0272.70.1736005000

-0414.10.2536004000

-0515.10.3136004000

-0616.10.3736003800

MZG1A/PZG1A





-0707.00.4

36004000

-0959.50.6

36004000

-11311.30.7

36004000

-14014.00.9

36004000

-17817.81.1

34003600

-20820.81.3

30003450

-27927.91.7

26002800

MZG2A/PZG2A





-22522.51.4

36003500

-26426.41.6

36003000

-33733.72.1

36003000

-39439.42.4

36003000

-42742.72.6

36002800

-51451.43.1

33002800

-600603.7

25002800

-69669.64.2

25002500

-77677.64.7

20002300

-87687.65.3

20002000

MZG3A/PZG3A

Mobile Hydraulics

6

Motors Fixed DisplacementLow Speed High Torque


• High volumetric efficiency• Long life• Full flow spline cooling• High pressure shaft seal• High flow shaft seal cooling• Small envelope size

Frame size TADisplacement [cm3/rev]



-0045432.6

1250756

-0050493.0

1250632

-0065664.0

1250479

-0080825.0

1250389

-0100986.0

1250438

-01301318.0

1250334

-016516410.01250271

-019519711.91250226

-023022913.91100193

-026026215.9950173

-029529517.9850153

-033032820.0750137

-036537122.6650121

-039039324.0650114

TA

• High volumetric efficiency• Long life• Full flow spline cooling• High pressure shaft seal• High flow shaft seal cooling• High starting torque

Frame size TBDisplacement [cm3/rev]



-0045452.7

1800722

-0050493.0

1800623

-0065654.0

1800476

-0080825.0

1800379

-0100996.0

1800430

-01301308.0

1800327

-01651639.9

1800257

-019519511.91800221

-023022813.91500190

-026026015.91450167

-029529317.91400147

-033032820.01350131

-036537122.61250117

-039039224.01200111

TB

• High volumetric efficiency• Long life• Full flow spline cooling• High pressure shaft seal• High flow shaft seal cooling• High starting torque• High side load capacity• Balanced performance in both directions of rotation

Frame size TDDisplacement [cm3/rev]



TD

-0045452.7

2000715

-0050503.0

2000594

-0065664.0

2000617

-0080825.0

2000504

-0100986.0

2000420

-01301308.0

2000323

-016516310.02000256

-019519612.02000215

-023022814.01750237

-026026116.01650206

-029529318.01550185

-033032620.01450165

-036537122.61325146

-039039224.01250138

Mobile Hydraulics

7



• High volumetric efficiency• Long life• Full flow spline cooling• High pressure shaft seal• High flow shaft seal cooling• High starting torque• High side load capacity

Frame size TFDisplacement [cm3/rev]



TF

-0090814.9

3000488

-01001006.1

2250517

-01301287.8

2000404

-01401418.6

2000368

-017016910.32000309

-019519712.02000267

-029023814.52000297

-028028017.12000252

-036036422.21350193

-036536522.21400202

-040540524.71850172

-047547729.11645149


Frame size TGDisplacement [cm3/rev]



-01401408.6

3000459

-017016910.33000399

-019519511.93000331

-029023714.53000268

-029528017.13000227

-033533720.63000182

-040540524.72500162

-047547629.12000149

-053052932.32000129

-062562438.01750109

-078578648.0150085

-096095858.5100076

TG


Frame size THDisplacement [cm3/rev]



TH

-01401408.6

3000660

-017016910.33000554

-019519511.93000477

-029023714.53000393

-029528017.13000334

-033533720.63000277

-040540524.72500232

-047547629.12000237

-053052932.32000213

-062562438.01750182

-078578648.01500143

-096095858.51000118

Mobile Hydraulics

8



• High volumetric efficiency• Wear compensated power element• One-piece, fixed axis shaft• Most compact motor on the market• Long life• Low internal pressure drop• High starting torque

Frame size NEDisplacement [cm3/rev]



NE

-060603.6

3000770

-090905.4

3000684

-1151157.1

3000651

-1451458.8

3000525

-17517510.62750436

-21021012.92750358

-27027016.42500282

-31031018.92250241

-39539524.12250184


Frame size 130SDisplacement [cm3/rev]



130S

-036593.6

3000898

-054895.4

3000684

-0711167.1

3000651

-0881448.8

3000525

-10617410.62750436

-12921112.92750358

-16426916.42500282

-18931018.92250241

-24139524.12250184


Frame size 110ADisplacement [cm3/rev]



110A

-036593.6

3000898

-054895.4

3000684

-0711167.1

3000651

-0881448.8

3000525

-10617410.62750436

-12921112.92750358

-16426916.42500282

-18931018.92250263

-24139524.12250184

Mobile Hydraulics

9



• High volumetric efficiency• Wear compensated power element• One-piece, fixed axis shaft• Most compact motor on the market• Long life• Low internal pressure drop• High starting torque• Heavy duty bearings

Frame size 110A w/mDisplacement [cm3/rev]



110A w/m

-0881448.8

3000525

-10617410.62750436

-129211

12.92750358

-16426916.42500282

-18931018.92250263

-24130524.12250184

• High volumetric efficiency• Wear compensated power element• One-piece, fixed axis shaft• Most compact motor on the market• Long life• Low internal pressure drop• High starting torque• High side load capacity• High torque transmission




120S

-0881448.8

2750472

-10617410.62750392

-12921112.92500322

-16426916.42500254

-18931018.92250220

-24139524.12250173

• High volumetric efficiency• Wear compensated power element• One-piece, fixed axis shaft• Most compact motor on the market• Long life

• Low internal pressure drop• High starting torque• High flow capability• Series/Parallel operation• Solenoid, pilot, or manual shaft actuation

Frame size 700/716Displacement [cm3/rev]

[in3/rev]

Max continuous pressure [psi]


-07260119

3.67.2

35003000

1027962

-10888176

5.410.8

35003000

684641

-142116232

7.114.2

35003000

651488

-176144289

8.817.6

35002500

524393

-212174348

10.621.2

32502500

435327

-258212423

12.925.8

27502000

321268

SeriesParallel

SeriesParallel

SeriesParallel

SeriesParallel

700/716

Mobile Hydraulics

10



• High volumetric efficiency• Wear compensated power element• One-piece, fixed axis shaft• Most compact motor on the market• Long life• Compact design• High side load capacity• Rugged 4.1 to 1 planetary gear reducer

Frame size 310Displacement [cm3/rev]



-124214.82250228

-236322.22250156

-347829.12250118

-459236.1180094

-571343.5150079

-686853.0125066

-7110367.3100051

310

• High volumetric efficiency• Wear compensated power element• One-piece, fixed axis shaft• Most compact motor on the market• Long life• Low internal pressure drop• High starting torque• High side load capacity• Heavy duty setting brake




-0881448.8

3000472

-10617410.63000392

-12921112.92750322

-16426916.42750254

-18931018.92500244

-24139524.12250173

400S

Mobile Hydraulics

11

Motors VariableDisplacement


• Very high operating speeds• Displacement ratio 5:1• Pressures up to 7000 psi• Very high power capability• High starting torque• Low weight

• High overall efficiency• Axial or side ports• Controls available for most needs• ISO, SAE and cartridge versions available

Frame size V12Displacement

max at 35o [cm3/rev][in3/rev]

min at 6.5o [cm3/rev][in3/rev]

Max continuous pressure [psi]Max operating speed* [rpm]

* At reduced displacement

-60

603.6612

0.7360007000

-80

804.8816

0.9860006250

-110

1106.7122

1.3460005600

-160

1609.7632

1.9560005000

V12

• Designed specifically for track drives• Very high operating speeds• Pressures up to 7000 psi• Very high power capability• High starting torque• Low weight

• High overall efficiency• Axial or side ports• Two-position control• Cartridge version available

Frame size T12Displacement

max at 35o [cm3/rev][in3/rev]

min at 10o [cm3/rev][in3/rev]

Max continuous pressure [psi]Max operating speed* [rpm]

* At min displacement

-60

603.6618

0.7360007000

-80

804.8824

0.9860006250

T12

Mobile Hydraulics

12

Pumps VariableDisplacement


• High strength cast iron housing• Built in supercharger• High sideload capacity• Sealed shaft bearing• Two piece housing• Cartridge controls

• Airbleed valve• Thru-shaft option (PAVC100)• Optional port location• Full pressure rating on water glycol fluids• Control Drain may be filtered and/or cooled

Frame size PAVCDisplacement [cm3/rev]


Max self priming speed at0 psi gauge [rpm]

-33332.0

3000

3000

-38382.3

3000

3000

-65654.0

3000

3000

-1001006.1

3000

2600

PAVC

• High strength cast iron housing• Modular controls• Fast response times• Thru-shaft options• Optional port location• 9 & 11 piston design• English and metric mounting features• Low control pressures

-1616.41.0

3600

3000

-23231.4

3600

3000

-33332.0

3600

3000

-41412.5

3600

2800

-48482.9

3600

2600

-60603.7

3600

2200

-76764.6

3600

2200

-1001006.1

3600

1800

-1401408.5

3600

1800

PVP

Mobile Hydraulics

• High strength cast iron housing• Modular controls• Fast response times• Thru-shaft options• Optional port location• 9 & 11 piston design• English and metric mounting features• Low control pressures

PHP

Frame size PHPDisplacement [cm3/rev]


Max self priming speed at 0 psi gauge [rpm]

-10100.6

50003000

-60603.7

50002200

Frame size PVPDisplacement [cm3/rev]


Max self priming speed at0 psi gauge [rpm]

13

Pumps VariableDisplacement


• Pressures up to 5000 psi• Suitable for all load-sensing systems• Splined shaft DIN 5462• Mounting flange ISO 7653-1985• Light and compact• Strong and reliable• Less energy – less fuel – less heat• Self-priming

• Low noise levels• Long life• Many modular control options• Thru-shaft options• Swash plate position indicator• Pressures up to 6000 psi• Hydrostatically balanced nitrided steel slipper shoes• Short response time• Easy to service

Frame size VP1Displacement [cm3/rev]


Self-priming speed* [rpm]* 2 1/2” suction line

-4545

2.7543502400

-7575

4.5843502400

VP1

V30

• High strength cast iron housing• Modular controls• Large control piston• Thru-shaft option• 9 piston design• Multiple pressure control• English and metric mounting features• Fast response option

Frame size PVDisplacement [cm3/rev]



PV

-23231.4

50002750

-46462.8

50002400

-92925.6

50001900

-1301307.9

50001800

-18018011.050001800

-25025015.350001800

Mobile Hydraulics

Designation V30D-045 V30D-075 V30D-095 V30D-115 V30D-140 V30D-250Displacement [cu.in./rev.] 2.75 4.58 5.86 7.02 8.66 15.31

[cm3/rev] 46 75 96 115 142 251Max continuous pressure [psi] 5000 5000 5000 38001) 5000 5000

Self-priming speed at maxswash angle and 15 psi (1 bar)

absolute inlet pressure [rpm] 2600 2400 2200 2000 2100 16001) Higher pressure possible with swash angle = 17O

14

Remote Control Systems


The CAN bus feature makes possiblea simplified wiring installation and 2-waycommunications between the individualvalves and I/O modules and the maincontroller for simplified diagnostics andsetup. The CAN technology also allowsthe distribution of control to the individualcomponents. Additionally, the controller iscapable of reading sensor inputs foradvanced control of the equipment.

MMC1000The MMC1000 is a digital controller withauxiliary interface modules designed forthe control of hydraulic systems on mobileequipment. The MMC1000 makes use ofCAN based serial bus system forcommunication between the remote I/Omodules, proportional valves, and theMMC1000 central control unit.

MMC1000

System typeIndividually adjustable control characteristics, start and

final valuesLinear or broken characteristicsSelectable current steps (forced opening)Adjustable ramp function for control of speed changesTwo-speed function for switching between two

speed rangesDouble function for control of two alternative valves,

or two different control characteristics for the same valve

Common reduction function for stepless down-regulation of all control-curve slopes by means of an external analog signal

Individual reduction function for individual stepless down-regulation of control-curve slope by means of external analog signals

Activating functions for automatic engagement of different functions upon selected lever actuation or by means of switching buttons

Holding function – can retain desired control signal for any function

Dead-man function for any lever unitFriction brake for retention in any positionHandle with center-position detent

EHC35

X

XX

IQAN

XXXX

X

X

X

X

X

XXXX

MMC1000

X

XX

X

X

X

X

X

XX

MOTION-PAC

XXXX

X

X

X

X

X

XXXX

Electro-hydraulic

Mobile Hydraulics

15 Parker Hannifin CorporationMobile Systems DivisionLincolnshire, IL 60069Mobile Hydraulics

EHC35The EHC35 is an electro-hydraulic, analog controlsystem for the proportional remote control of directionalvalves, pumps, motors, etc.

IQANIQAN, an electro-hydraulic control system, enables boththe implement and transmission hydraulics in a machineto be controlled by one system. This, together withmodular construction, digital serial signal transmission(using CAN bus technology) and a host of integrated-function options, makes the IQAN systemcomprehensive, rational, easy to install and enormouslyflexible for original machine design and subsequentmodification to suit different applications.

Utilizing advanced but easily understood monitoringand fault-finding facilities, the IQAN system givescontinuous information on the status of importantmachine parameters by means of a graphic display inthe cab. This display enables the machine operator tomake better informed decisions on the optimization ofcontrol values to suit changes in load and workingconditions. With a laptop computer connected to thesystem, the integrated fault-finding routines in IQAN canbe supplemented with a diagnostics facility for servicepersonnel to easily identify any faults that might occur inthe hydraulics system.

MOTION-PACThe Motion-pac control system offers a variety ofprepackaged systems to suit application and marketneeds. Some of the products include:• Digital and analog controllers for valve drivers to

microprocessors with application specific software• On board calibration with digital displays• Data logging• Remote control systems designed to provide true

remote control between the electro-hydraulictechnology and the operator

• Joysticks which make use of conductive plastic tracksand solid state technology to provide analog anddirectional signals with the electronic controller suppliesPulse Width Modulation drive output

• Switch consoles which provide fingertip on/off control ofauxiliary operations

12 or 24 V DCAll of the above control systems are available for 12 or24 V DC. The output control-signal ranges are 0 to 0.8 Aand 0 to 0.6 A respectively. The output control pressurefrom the PVE/PVC102 and PVC25/QDC25 convertervalves used with the systems is 0 to 435 psi for bothvoltage levels. All units carry the CE mark and complywith the EMC Directive (89/336/EEC).

MOTION-PAC

IQAN

Remote Control Systems Electro-hydraulic

16

Remote Control Systems Hydraulic


System Type

Control-pressure range Control flow

Individual control characteristics for each directionSelectable start and final pressuresSelectable lever forcesCurves with straight characteristics

Curves with 2-step characteristicsCurves with forced opening (final step)Friction brake for retention in any positionMechanical or electro-magnetic end-position detent

Hydraulic pilot pressure

14 -1000 psimax 4 GPM

XXXX

XXXX

PCL4

PCL4-N

Pneumatic

System Type

Control-pressure range Control flow

Control curves with straight characteristics

Friction brake for retention in any positionMechanical end-position detent

Pneumatic pilot pressure

0 - 115 psimax 7 NI/s

X

XX

VP04

All connection ports can be obtainedwith G1/4, M14x1.5 or 9/16 UNFconnection threads. The coordinate valveis available in a version with allconnections in the base plate. Up to 6linear units can be built together in ablock.

The PCL4 is a hydraulic pilot system forthe proportional remote control ofdirectional valves, pumps, motors, etc. Itis available with coordinate lever-units, aswell as linear units for hand or foot control.

The PCL4 is intended primarily for theremote control of hydraulically operatedspool actuators and pump regulators in allkinds of mobile and industrial applications.

All connections are furnished withcouplings of the plug-in type. The signalports can be obtained for 6 mm or 1/4”I.D. hoses. The primary port and tank portare available in 6 mm, 8 mm, 1/4” or 5/16” I.D.

The VP04 is a pneumatic pilot valve forthe proportional remote control ofdirectional valves, positioning cylindersetc. Either linear or coordinate-leverversions of the VP04 are available.

Principal applications include theproportional remote control of pneumaticspool-actuators and positioning cylindersin mobile or industrial hydraulic systems.

Mobile Hydraulics

17

Hydraguide™ Hydrostatic Steering Units


• Compact package size• Patented pressure dams• Removable upper column• Full pressure shaft seal• Fittingless port cover• Internal relief valve• Low noise option• Manual emergency steering

HGF

• Full pressure shaft seal• Linear valve spool• Patented pressure dams• Vaned rotor• Pressure balanced metering group• Load sense option• Manual emergency steering• Multiple column options

Frame size HGADisplacement [cm3/rev]

[in3/rev]Max operating pressure [psi]

Flow [GPM]

-0897.45.942500

5

-10121.67.422500

5

-12146.08.912500

5

-14170.510.40250010

-16194.711.88250010

-20243.414.85250010

-24292.117.82250010

-28338.420.65250010

-32389.123.74250010

Frame size HGFDisplacement [cm3/rev]


Flow [GPM]

-0854.13.301800

8

-1067.74.131800

8

-1281.14.951800

8

-16108.26.601800

8

-20135.28.251800

8

HGA

• Full pressure shaft seal• Linear valve spool• Patented pressure dams• Pressure balanced metering group• Load sense option• Manual emergency steering• Multiple column options

Frame size HGBDisplacement [cm3/rev]


Flow [GPM]

-16491.7

302500/3000*

35

-24737.6

452500/3000*

35

-32983.4

602500/3000*

35

-401229.3

752500/3000*

35

-481475.1

902500/3000*

35

-641966.8

1202500/3000*

35

HGB

*Special housing for 3000 psi operation available.

Mobile Hydraulics

18 Parker Hannifin CorporationMobile Systems DivisionLincolnshire, IL 60069Mobile Hydraulics

Two types of directional valves can beused: open-center valves (CFO) andclosed-center valves (CFC). The twotypes of valves give completely differentcontrol characteristics.

CFO valves are intended forapplications in which simple,uncomplicated components are requiredand where the demands for simultaneous-operation characteristics are moderate.CFC valves are intended for applicationsin which the demands on controlcharacteristics are great, while at thesame time, a system with a fixed pump isrequired.

Parker valves can be obtained with alarge number of optional components andmountings such as:• A main pressure relief• Individually adjusted port-relief and

anti-cavitation valves• Separate replenishing valves with

counterpressure valves• Application adapted spools• A large selection of spool actuators• Single or multi-pump operation by

stacked valves• Subplate, stackable, or manifold styles• Load hold checks• Crossover reliefs• Flow controls• Power beyond feature• Proportional inlets for fine metering• E-stop, pump channel blocked in

emergency

[Options vary for different valves]

F130CF

MV3

VDP12

Directional Control Valves ConstantFlow

19

Directional Control Valves ConstantFlow


• DC surge suppression• Four electrical connection options• AC & DC lights available (CSA approval

for solenoids and lights)• Waterproof (NEMA 4 rated)• Explosion proof• CSA and UL approved• Flow ranges from 5-22 gpm

The D1VW Series directional controlvalves are high-performance, 4-chamber,direct operated, wet armature solenoidcontrolled, 3 or 4-way valves. They areavailable in 2 or 3-position and conform toNFPA’s D03 mounting patterns.• Mechanically tunable soft shift• Proportional spools, 21 spool styles

available

Mobile Hydraulics

D1VW

System type

CFO

CFO

CFO

CFO

CFO

CFO

CFO

CFO

CFO

CFC

CFC

CFC

CFC

CFC

CFC

CFC

CFC

CFC

CFC

CFC

Valve

VY13MV5MV3HV07VDP11MV4

F130CFVDP12H170CF

MV5MMV 6BV06MV3

MMV 10MV4BV18L90LS

MMV 12MMV 16

HV08

Pump flow [GPM]

4

6

12

13

20

23

34

25

45

6

8

10

12

21

23

24

34

34

52

80

Pressure [PSI]

2000

3000

3000

3600

2000

2500

4600

3500

4600

3000

4000

3000

3000

5000

2500

5000

4600

5000

5000

4600

Manual

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Pneumatic

X

X

X

X

X

X

Hydraulic

X

X

X

X

X

X

X

X

X

Electro-hydraulic

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Operation

20

Directional Control Valves Constant Pressure &Constant Pressure Unloaded


CP and CPU valves are used when thereis a high demand for good controlprecision with little interference betweenfunctions during simultaneous operation.The system is of simple construction, butrequires a certain adaptation to theapplication in order to give the bestcombination of function, controlcharacteristics and operating economy.




stacked valves• Subplate, stackable, or manifold styles• Load hold checks• Crossover reliefs• Flow controls• Variable or fixed pumps


MV5

System type

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

CP/CPU

Valve

MMV 6BV06

MMV 10BV18HV07

MMV 12F150CP

VQLVMLVPL

MMV 16VP/VPO

Pump flow [GPM]

8

10

21

24

24

34

40

50

50

50

52

100

Pressure [PSI]

4000

3000

5000

5000

3600

5000

4600

5000

5000

5000

5000

4000

Manual

X

X

X

X

X

X

X

X

X

X

Pneumatic

X

X

X

Hydraulic

X

X

X

X

X

X

X

X

Electro-hydraulic

X

X

X

X

X

X

X

X

X

X

X

BV18

Operation

Mobile Hydraulics

VPL

21

Directional Control Valves LoadSensing


The directional control valve in the loadsense system regulates the displacementof a variable displacement pump via aload signal line. The pump maintains apressure difference between its outlet portand the highest load signal to supplypressure and flow to match the demand.These systems are the most advancedoffering optimum control characteristicswith good efficiency/fuel economy.




stacked valves• Subplate, stackable, or manifold styles• Load hold checks• Crossover reliefs• Flow controls• Various electrical certification can be met


MMV6

System type

LS

LS

LS

LS

LS

LS

LS

LS

LS

LS

LS

LS

LS

Valve

MV5MMV 6

MMV 10L90LS

MMV 12K170LS

VQLVMLVPL

MMV 16K220LSHV08

VP/VPO

Pump flow [GPM]

6

8

21

34

34

45

50

50

50

52

65

80

100

Pressure [PSI]

5000

4000

5000

4600

5000

4600

5000

5000

5000

5000

5000

4600

4000

Manual

X

X

X

X

X

X

X

X

X

X

Pneumatic

X

X

Hydraulic

X

X

X

X

X

X

X

X

Electro-hydraulic

X

X

X

X

X

X

X

X

X

X

X

X

X

K220LS

Operation

Mobile Hydraulics

L90LS

22

Threaded Cartridge Valves


Valve type

Direct acting relief valvesCounterbalance valvesCross-over relief valvesDual relief with anti-cavitation checksPiloted operated relief valvesPressure sensing valvesReducing/relieving valvesDirect acting pressure reducing valvesPressure reducing valvesPressure reducing spoolsSequence valvesUnloading relief valvesLogic elements

Max working pressure [PSI]

5000350035005000500050005000500050005000500035003600

Max setting pressure [PSI]

50003500350050005000

500050005000

500030003600

Flow capacity [GPM]

0-400-2000-200-160-800-500-400-150-150-500-400-1.50-50

Pressure Control Valves

Valve type

Needle valvesRotary adjust needle valvesFlow divider/combiner valvesPilot control flow control valvesFlow control valvesRestrictive-type, pressure compensated valvesPriority-type, pressure compensated valvesRestrictive-type, pressure compensated

flow regulator valvesPriority-type, pressure compensated

flow regulator valvesPriority-type, pressure compensated

flow regulator with reliefVelocity fuses


3500350030003000350035003500

3500

3500

35003000

Max flow setting [GPM]

0-10

0-9

0-9

Flow capacity [GPM]

0-500-150-120-150-120-400-15

0-15

0-15

0-150-8

Volume Control Valves

Mobile Hydraulics

23

Threaded Cartridge Valves


Valve type

Check valvesSoft seat check valvesVent-to-open check valvesPilot-to-close check valvesSingle pilot operated check valvesDouble pilot operated check valvesShuttle valves


5000300035003500300030003500

Flow capacity [GPM]

0-600-150-600-400-500-500-6

Load Holding Valves

Valve type

Solenoid operated, two-way, N.C. or N.O.proportional flow control valves

Solenoid operated, two-way N.O.proportional pressure control valves

Solenoid operated, two-way N.C. throttle valveSolenoid operated, proportional

pressure reducing valvesSolenoid operated, proportional flow control,

pressure compensatedSolenoid operated, three-way, proportional

pressure control


5000

50003000

5000

3000

3000

Flow capacity [GPM]

14

85

40

10

10

Proportional Control Valves

Valve type

Manual valvesManual three-way valvesManual four-way valvesPilot operated directional control valvesSolenoid, poppet-type, two-way valvesSolenoid, poppet-type, bi-directional valvesSolenoid, spool-type, two-way valvesSolenoid, spool-type, three-way valvesSolenoid, spool-type, four-way valvesDouble Solenoid, spool-type, four-way valves


3500350035003500500050005000500050005000

Flow capacity [GPM]

136210705201786

Directional Control Valves

Mobile Hydraulics

24

Auxiliary Valves


Valve type

Subplate/relief valvesHi-lo unloading valvesHand pumpsAccumulator bleed-down valvesBankable, 2-position, 4-way, solenoid

operated, circuit selector control valvesBankable inlet relief valvesBankable inlet relief valves with unloaderBankable unloader valvesReducer valvesSequencing valvesHose-rupture valves


350035007003500

3000300030003000360036005000

Max setting pressure [PSI]

3000

Flow capacity [GPM]

6015

.083 in3/stroke(displ.)20(inlet); 60(accum-tank)

1010997766

Valve type

Relief valves


6000

Pressure setting range [PSI]

360 - 6000

Flow capacity[GPM]0 - 70

Directly controlled pressure-reliefvalves with anti-cavitation function.The valves have good pressurecharacteristics together with veryshort reaction times. They arecompact, reliable, very well sealedand are not sensitive tocontamination.

Relief Valves

Mobile Hydraulics

25

Integrated Hydraulic Circuits


Integrated Hydraulic Circuits (Hydraulic Manifold Blocks)are designed to meet the many demands on mobilehydraulic equipment. Manifold blocks offer you thefollowing benefits: a minimum number of tubes, hosesand couplings; fewer components; fewer leakage points;less space required; simplified assembly and serviceinstructions; and a complete system solution withoptimized functions. Manifold blocks can be flanged toone or more directional valves as well as to pumps,cylinders, motors and filters.

Mobile Hydraulics

26

Accumulators


Piston Accumulators• Over 50 standard capacities from 5 cu. in. (.075 liters)

to 50 gallons (189 liters)• 2”, 3”, 4”, 6”, 7”, 9” and 12” nominal bore sizes• Maximum operating pressures up to 5000 psi (350 Bar)• Patented five-bladed V-O-ring piston seals in five

standard seal compounds• Accumulator and gas bottle configurations• ASME, TUV, and DNV Certifications

Diaphragm Accumulators• Standard capacities from 5 cu. in. (.075 liters) to 170 cu.

in. (2.8 liters)• Maximum operating pressures up to 3600 PSI (250

Bar)• Compact and lightweight• Low-cost, non-repairable design• Quick responding diaphragms of nitrile or hydrin

Bladder Accumulators• Standard capacities from 10 cu. in. (.16 liters) to 40

gallons (151 liters)• Maximum operating pressures up to 6000 psi (414 Bar)• Superior in-house manufactured bladders• Six bladder compounds to suit a variety of fluids and

temperatures• Bottom and top repairable, high-flow, transfer barriers,

and gas bottles• Water/chemical service available

Mobile Hydraulics

AccumulatorCharging Kit

27

Filters


Low Pressure Filters• Variety of mounting configurations• High capacity/high efficiency Microglass II media• Visual and electrical indicators with several connector styles• Flange options for low profile easy mounting• Integral breather (FT series)

Medium Pressure Filters• NPT, SAE or flange ports• High capacity/high efficiency Microglass II media• Visual and electrical indicators with several connector styles• Cartridge style bypass valve

High Pressure Filters• SAE, flange or ISO ports• High capacity/high efficiency Microglass II media• Visual and electrical indicators with several connector styles• Manifold mount option (50P & 15/30P series)• Reverse flow option (50PR series) for HST circuits

Model Max flow (gpm) Max pressure (psi) Mounting style12AT 17 150 Spin-on50AT 36 150 Spin-onRF4 120 150 Tank topFTA 15 150 Tank topFTB 35 150 Tank topFTC 75 150 Tank topIL2, RF2 120 200 In-line, L-styleRF7 300 150 Tank top

Model Max flow (gpm) Max pressure (psi) Mounting style15CN 25 1000 In-line40CN 80 1000 In-line80CN 120 1000 In-line

Model Max flow (gpm) Max pressure (psi) Mounting style15P 20 3000 In-line, manifold30P 45 3000 In-line, manifold30PD 25 3000 In-line, duplex50P 100 5000 In-line, bowl up50PR 70 5000 In-line, reverse flow18P 25 6000 In-line28P 55 6000 In-line38P 110 6000 In-line

Mobile Hydraulics

28

Fluid Analysis


PLC-3000The PLC-3000 is the next generation portable particlecounter designed to verify fluid cleanliness levels. Thefully portable PLC-3000 can perform both on-line andbottle sampling, with the same unit, while reportingcounts at 2, 5, 15, 25, 50 and 100 microns. The newPLC-3000 includes many unique features, including:• Viscosity measurement from 200-2000 SUS for trend

analysis• Particle counting in ISO or NAS format in less than one

minute• On-line sampling up to 6000 psi• Temperature measurement• Petroleum based and phosphate ester (Skydrol®) fluid

compatible with the same unit

Par-TestA complete laboratory analysis performed on a smallvolume of fluid. Results are provided in a neatlyorganized three page format. Two types of services areavailable through Par-Test, a water based fluid kit and apetroleum based fluid kit. The kit includes a pre-cleanedsample bottle, data sheet and mailing container. Thestandard tests included with the service are; particlecount, photomicrograph, free water analysis, viscosityanalysis, water analysis and neutralization analysis.

Mobile Hydraulics

Parker’s CharterTo be a leading worldwide manufacturer of compo-nents and systems for the builders and users of durablegoods. More specifically, we will design, market andmanufacture products controlling motion, flow andpressure. We will achieve profitable growth throughpremier customer service.

Product InformationNorth American customers seeking product infor-mation, the location of a nearby distributor, or repairservices will receive prompt attention by calling theParker Product Information Center at our toll-freenumber: 1-800-C-PARKER (1-800-272-7537). In the UK,a similar service is available by calling 0500-103-203.

The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.

The Hydraulics Groupdesigns, produces and marketsa full spectrum of hydrauliccomponents and systems tobuilders and users of industrialand mobile machinery andequipment.

The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.

The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.

The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.

The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applications.

About Parker Hannifin CorporationParker Hannifin is a leading global motion-controlcompany dedicated to delivering premier customerservice. A Fortune 500 corporation listed on the NewYork Stock Exchange (PH), our components and sys-tems comprise over 1,400 product lines that controlmotion in some 1,000 industrial and aerospace mar-kets. Parker is the only manufacturer to offer itscustomers a choice of hydraulic, pneumatic, andelectromechanical motion-control solutions. Our Com-pany has the largest distribution network in its field,with over 7,500 distributors serving more than 350,000customers worldwide.

Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com

Parker Hannifin Corporation

The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospace andrelated high-technology mar-kets, while achieving growththrough premier customerservice.

The Climate & IndustrialControls Group designs,manufactures and markets sys-tem-control and fluid-handlingcomponents and systems torefrigeration, air-conditioningand industrial customersworldwide.

mobile systems division product range - ap ltd. introduction parker hannifin corporation mobile...

Documents