Mobile weighing systems

Data transmission:

Griptech GmbH – Konrad-Zuse-Straße 8 – 52134 Herzogenrath (Germany) – Telefon +49 2407 555 02 0 – info@griptech.de – www.griptech.de

Hydraulic weighing systems

TC4000 - Highest precision

Weighing accuracy ±0.1%

First legal for trade hydraulic weighing system, with unique accuracy

For trucks with capacity up to 10,000 kg Components vibration and shockproof Tilt-compensation system Protection against overvoltage

TC2000 - The Workhorse

Weighing accuracy ±0.2%

For trucks with capacity up to 50,000 kg Reliable and user-friendly system Components vibration and shockproof Easy installation and calibration No sensors directly on the mast Protected against overvoltages

For warehouse trucks weighing accuracy ±0.2% - 0.5%

Without return to the tank For reach trucks, electric pallet trucks and stackers High and stable system accuracy (±0,2%-0,5% of the capacity of the forklift). Weighing from 80 kg up to a maximum of 2,500 kg Components vibration and shockproof Easy installation and calibration Lowering can always be interrupted No disturbance of the lift hight preselection on the reach truck

TC2000-S - Sexy

ATEX certifiedDelivery incl. certificate for zone 1 or 2.

Stainless steel caseProtection class IP 65

Optionally available:

The weighing accuracy is at all hydraulic weighing systems specified as a percentage of the load capacity of the truck.

Our hydraulic weighing systems are all: insensitive protected installed independent of the load center independent of attachments

TC3000 - Highest precision for large forklifts

Weighing accuracy ±0.1%

For trucks with a capacity from 10,000 kg Components vibration and shockproof Tilt-compensation system Protected against overvoltages

TC3000RS (SOLAS) - For Reachstacker

Weighing accuracy ±0.2%

Highest accuracy for hydraulic weighing systems Robust system with the best accuracy SOLAS approved Method 1 SmartBox for data transmission Protected against overvoltages

Pressure sensor with ±1.5% accuracy

Robust, insensitive system High-precision pressure sensor Standard with memory function Incl. RS232 interface (round plug 4-pin) Optional with numeric keypad (display R420) Supply voltage 12 volts

LI400 - Load indication system

Weighing accuracy ± 0.5%

Robust and protected installed High dosage accuracy Possible to combine with large display

TC1000-D - Dosing system

External large display for the TC1000-D

G400 indicator for TC1000-D and LI400

Weighing accuracy ±2%

The system warns you if the truck is overloaded Acoustic and / or visual warning User-friendly and easy to install Increases safety during operation, decreases repair costs

OLP - Overload protection system

Overload protection system OLP

With us you will achieve the best results

Weighing accuracy 0.1% of the applied load

Accurate results with 6 integrated load celss Reconstruction by Griptech. Robust design especially for receiving the load cells All welding works certified according to ISO 3834-2 Legal for trade version including class III certificate Optonal EP 8 on request

Electric pallet trucks and stackers

Lowered height remains unchanged

HARDOX Sliding Pads

Total height of the weel arms increased by 6 mmWeighing accuracy ±2%

The system warns you if the truck is overloaded Acoustic and / or visual warning User-friendly and easy to install Increases safety during operation, decreases repair costs

Weighing accuracy 0.1% of the applied load Robust and easy to use hand pallet truck 2,000 kg carring capacity Equipped with 2 load cells in one line in each fork Also available in Legal for Trade Optionally with printer Optional stainless steel version

Available in 3 colors(blue, red, orange)

Tandem polyurethane wheels

High lifter Also available in Legal for

Trade version

Electric and hand pallet truck

Hand pallet truck

Weighing accuracy 0.1% of the applied load

Signal transmission via bluetooth or spiral cable Also available in Legal for Trade Available with fork positioner 2 load cells for high accuracy Weighing at every lifting hight User-friendly system Version FEM 2 and FEM 3 ‚Heavy Duty’ version with 6 load cells

Version with bluetooth transmissionTransmitter and battery protected

Weighing accuracy 0.5% of the applied load

Robust construction with optimal visibility Hook on version or integrated into the mast Signal transmission via bluetooth or spiral cable Load capacity up to 5,000 kg

Combination with attachmentsHeavy Duty version

Forks and fork carriagein combination with load cells

Weighing forks Weighing fork carriage

In combination with a rotator or with fork positioner

Display R420 with numeric keypad

Display X320 with protection class IP68/ IP69K Cold store suitable

Indicator: Printer:

Label printer

Thermal printer Dot matrix printer

Thermal printer

Data transmission:

Bluetooth

Wifi (Moxa Port)

Switchbox

SmartBox

Options

Your partner for:

Attachments

Weighing systems

Camera systems

Griptech GmbH – Konrad-Zuse-Straße 8 – 52134 Herzogenrath (Germany) – Telefon +49 2407 555 02 0 – info@griptech.de – www.griptech.de

Telephone or personal advice Free demonstrations directly at the customer

International installation on site by technicians from Griptech Training by professional technicians Several years of experience lead to less downtime of the trucks

Installation directly on site by our service technicians