mobilink cat7 lte outdoor cpe - tellumat.com · datasheet: e-link blaze wave2.0 1200 mbps dual band...

Specifications are subject to change without notice INTELLIGENCE IN THE AIR

© EION Inc. 2018, All Rights Reserved WWW.EIONWIRELESS.COM

ORDERING INFORMATION

4181-35-00-10 MobiLink ML6300D LTE Outdoor CAT7 CPE

OVERVIEW

EION Wireless ML6300D is highly advanced TD-LTE CAT7 outdoor data unit specially

designed to meet the most challenging demands of today’s high-speed wireless backhaul

and fixed wireless access deployments by the 4G service operators. The unit can support

multiple TDD band operations. Multiple operator network support can also be provisioned

on the unit to allow the deployment across entire country with different operators.

ML6300D provides Gigabit PoE connection to connect user terminal device such as router

or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or

router products.

RELIABLE PERFORMANCE

ML6300D is designed to meet the stringent operation environment for outdoor CPE

devices. The device can safely operate in a wide temperature ranging from -40 to +55

degrees and meets industrial IP67 water and dust proof standard requirements. The

device MTBF time is expected to be above 80,000 hours. Depending on the network

configuration and DL/UL split ratio configuration, the unit can provide up to 300Mbps max

throughput over the air. The typical coverage should be more than 15km with reasonable

good throughput performance.

TECHNICAL FEATURES

ML6300D design is based on the standard implementation of LTE release10 specification.

It is able to meet the most demanding requirements of large service providers with high

throughput and availability. ML6300D is a CAT7 CPE and supports advance features such

as 4x4 MIMO, Carrier Aggregation, QAM64 modulation on the uplink.

With high gain directional patch antenna. ML6300D enables a longer reception to range

from the base station. This yields more efficient use of the network with a larger cell reach,

guaranteed carrier class service, and customer service probability. Advanced Orthogonal

Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-

of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts

typical of deployments in densely populated urban areas. Moreover, sophisticated QoS

capabilities ensure true end-to-end QoS and support high quality data services.

Mobilink CAT7 LTE

Outdoor CPE

PRODUCT FEATURES

• Cost effective & compact design with built-in LTE MIMO antennas.

• Compliant to 3GPP LTE Release10

• Advanced 4x4 MIMO, DL & UL CA, and UL QAM64 support (CAT7)

• Router and bridge operation mode support

• Support L2TPV3, PPTP and GRE VPN Tunneling clients

• Support secure Telnet, FTP, HTTP and TR069 remote OTA management

• Support IPv4&IPv6 and Multiple PDN

DATASHEET: Mobilink CAT7 LTE Outdoor CPE


5.4.18 © EION Inc. 2018, All Rights Reserved WWW.EIONWIRELESS.COM

Technical Specifications

PHYSICAL & ENVIRONMENTAL

Power DC : 48V/0.5A PoE <15W (Gigabit PoE)

Weight : <2.5Kg

Dimensions : 250mm (L) * 250mm(W) * 75mm(D)

Environment : Operating Temperature, -40℃~55℃.

Humidity, 95% max Non-condensing

Water Protection: IP 67

USER INTERFACE

Data Interface : 1 RJ45 10/100/1000M ETH Port

LED Indicator : PWR, SYS, NET, SIM, ETH, RF

(5 Signal intensity LEDs)

SIM Card : Single SIM card slot (2FF)

CONFIGURATIONS & MANAGEMENT

Network configuration:

DHCP or Static IP address Assignment

Bridge and Router Operation Support

Built-in DHCP Server for LAN Devices

IPv4, IPv6 DS-Lite Support

Multiple PDN interface support

NTP Service Support

SIM card locking feature

Network selection and cell locking provision

Data Networking Features:

VPN Pass-through support (PPTP, L2TPV3 & IPsec)

Built-in L2TPV3 & GRE Tunneling Clients

Firewall & Access Control

DMZ and Virtual Server Support

IP and Port Filtering Support

Local and Remote Management Restriction

Application Firewall Support

LAN Device Access Control

✓ Radio Access: 3GPP Release 10, Category 7

✓ Operation Mode: FDD/TDD

✓ Frequency Band: B7/3840/41, B42/43/48

✓ Channel BW: 5/10/20MHz，and CA support

✓ MIMO Support: 4Rx, 2Tx, DL 4*4 MIMO,

• DL & UL CA(2CC), UL QAM64

✓ Max Tx Power: 23dBm per antenna port

✓ Antenna Gain

o B7/3840/41: 14 dBi (2*2 CA), 10 dBi (4*4 MIMO)

o B42/43/48: 17dBi (2*2 CA), 13 dBi (4*4 MIMO)




9180-00-10-00 E-Link Blaze Wave2 MU-MIMO Dual Band Wall/Ceiling Mount Indoor Access Point

E-LINK Blaze Wave2.0 MU-MIMO 1200 Mbps Dual Band Access Point

OVERVIEW

E-LINK Blaze offers 2 x 2 MU-MIMO latest 802.11ac/a/b/g/n

Wave-2 technology with 5dBi antenna to provide excellent

coverage and capacity. It is concurrent Dual-band 2.4/5GHz Wi-

Fi Access Point that provides best in class Indoor Wi-Fi coverage

at signaling rates up to 900 Mbps on 5 GHz and 300 Mbps on 2.4

GHz. E-LINK Blaze is designed for medium to large areas

requiring Indoor Wi-Fi coverage.

The E-LINK Blaze AC Indoor has significantly higher capacity

and increased coverage capabilities over conventional Wi-Fi

Access Points due to a number factors working in concert. These

factors are the latest MU technology.

E-LINK Blaze has on Board Industrial grade PA and LNA which

improved the coverage significantly as compared to any standard

access point.

Based on CAPWAP protocol, E-Link Controller Centralized

management, Cloud Server remote configuration, east in

installation.

For connection into the network the two Gigabit Ethernet

interface on the E-LINK Blaze AC Indoor can connect to a wired

backbone.

EION E-LINK Blaze AC can be configured as a standalone

access point, or as part of a group of APs managed by EION’s

Network Controller. With up to eight different SSIDs per AP, E-

LINK Blaze AC products can form a powerful 3G/4G offload

solution for service providers and enterprises.

PRODUCT FEATURES

• Indoor MU-MIMO 802.11ac/a/b/g/n Wi-Fi AP supports dual-band operation in 2.4 GHz & 5.8 GHz (Wave-2)

• Tri band - 2.4 GHz + 5GHz

• 2 x 2 MIMO Technology, up to 1200 Mbps

• 200+ Simultaneous Users

• 360-degree coverage

• Increased Receiver Sensitivity for better coverage

• User Access Control (define radius of AP)

• Beamforming

• Central Controller Managed

• Zero-Touch Configuration from Controller

• IEEE 802.11ac compliant and Backward compatible with 802.11a/b/g/n

• Real Time Network Load Graphs

• Watchdog Timer

• User configured Timed Reboots

DATASHEET: E-LINK Blaze Wave2.0 1200 Mbps Dual Band Access Point



RADIO SPECIFICATION

Topology Standard Wireless LAN Topology (Multiple Modes Supported)

Frequency 2.4 GHz and 5 GHz (Dual-Band in a single enclosure)

Channel Size 20 MHz ; 40 MHz ; 80 MHz (5GHz Only)

Modulation OFDM : BPSK, QPSK, 16-QAM 64-QAM and 256-QAM

Signaling Rate 900 Mbps on 5 GHz and 300 Mbps on 2.4 GHz

Integrated Antenna 5dBi @ 2.4GHz, 5dBi @ 5GHz

Output Power 5GHz Up to + 23 dBm (aggregated 26 dBm), 2.4 GHz Up to + 23 dBm (aggregated 26 dBm), configurable

in 1dB step

Receiver Sensitivity

(BER = 10-6) +/- 2dB

5 GHz

Modulation 20 MHz 40 MHz 80 MHz

BPSK -94 dBm -91 dBm -90 dBm

16-QAM -82 dBm -79 dBm -76 dBm


256-QAM NA -65 dBm -61 dBm

2.4 GHz

Modulation 20 MHz 40 MHz

BPSK -94 dBm -93 dBm

16-QAM -84 dBm -82 dBm


256-QAM NA NA

Duplexing Format Dynamic Time Division Duplex (TDD), Half-Duplex

Medium Access

Control IEEE 802.11ac/abgn

Data Rate Selection Dynamic Adaptive Modulation per Link

NETWORK SPECIFICATIONS

Network Connection 2 x Gigabit Ethernet ports ; Auto MDI-X RJ45 10/100/1000 Mbps Ethernet

Operational Mode Transparent Bridging (per OSI Layer2), Multicast

Traffic Management Standard WMM ; User Cloud Authentication

MAC Filtering and Firewall

Filtering through Standard MAC address, Firewalls – Zones

VLAN Data Tagging/Un-tagging, 802.1q transparency, VLAN Management; SSID to VLAN Mapping

NAT 1:N NAT configurable through CPE GUI

DHCP DHCP Client , DHCP server for LAN devices when in NAT mode, PPPoE, L2TP

Ipv6 Ipv6 pass through in bridge mode

Routes Add static Routes

Operation Mode Standalone, Hotspot, E-Link Controller (Centralized Network Management & Configuration System)

Enhanced Control - Hotspot and Guest Portal Support - Powerful Network Diagnostic Utilities - Real-time Network Load Graphs

SECURITY

Management Access Username and Password

Compatible with all modern web browsers and Windows 7+ OS

Encryption WEP (64, 128, 154), WPA1 (TKIP), WPA2 (CCMP – AES 128, CBC-MAC for headers).




MANAGEMENT

Management Access Over the Air & Wired over prioritized ports

Remote Configuration/

Monitoring HTML Web-GUI, E-LINK Controller

Installation

Management

Wireless Link Monitor and Diagnostic Tool;

• Provides noise and RSSI signal levels as well as other statistical information

• Real-time view of available over the air bandwidth

• Real-Time Link Quality Metrics

• Built-in Spectrum Analyzer

Backup Configuration Save Radio Configuration to local PC

Software Upgrade Over the Air or local, Web-based upgrade

Services Auto Reboot, Ping Watchdog

PHYSICAL, ELECTRICAL & ENVIRONMENTAL

Power Consumption Typ. < 30 Watts

Power Supply 100-240V, 50/60 Hz AC; UL/CSA approved 48 Volt POE system; DC power Jack (12V to 24V). The

included power supply includes one standard 24V DC adaptor.

Temperature Range Operating: -20º C to +55º C

Storage: -40º C to +70º C

Relative Humidity Operating: 0% to 100% (condensing); Storage: Max. 90% (non-condensing)

Mounting Bracket Supports Wall-Mounted or Ceiling Mounted

Weight Carton Box 20 Units – 10 Kg

Dimensions Carton Box 20 Units – 515 x 435 x 491 mm

Lightning Protection Integrated, Telcordia GR-1089 compliant (Meets IEC 61000-4-2/ 4-4)

STANDARDS COMPLIANCE

Materials Compliance RoHS/WEEE

Certification CE, FCC & IC modular approvals

BOX CONTENTS

Each Box Contains the

following items

• E-LINK Blaze Wall/Ceiling Indoor 2 x 2 MU-MIMO Access Point

• 48V PoE Injector

• LAN Cable

• Wall Mount Accessory

• Quick Start Guide




9180-00-10-10 E-Link Extreme Wave2 MU-MIMO Tri Band Wall/Ceiling Mount Indoor Access Point

E-LINK Extreme Wave2.0 MU-MIMO 2100Mbps Tri Band Access Point

OVERVIEW

E-LINK Extreme offers 2 x 2 MU-MIMO latest 802.11ac/a/b/g/n

Wave-2 technology with 5dBi antenna to provide excellent

coverage and capacity. It is concurrent Tri-band 2.4/5GHz/5GHz

WiFi Access Point that provides best in class Indoor Wi-Fi

coverage at signaling rates up to 1800 Mbps on 5 GHz and 300

Mbps on 2.4 GHz. E-LINK Extreme is designed for medium to

large areas requiring Indoor Wi-Fi coverage.

The E-LINK Extreme AC Indoor has significantly higher capacity

and increased coverage capabilities over conventional Wi-Fi

Access Points due to a number factors working in concert. These

factors are the latest MU technology.

E-LINK Extreme has on Board Industrial grade PA and LNA

which improved the coverage significantly as compared to any

standard access point.



installation.


interface on the E-LINK Extreme AC Indoor can connect to a

wired backbone.

EION E-LINK Extreme AC can be configured as a standalone

access point, or as part of a group of APs managed by EION’s

Network Controller. With up to eight different SSIDs per AP, E-

LINK Extreme AC products can form a powerful 3G/4G offload

solution for service providers and enterprises.

PRODUCT FEATURES


• Tri band - 2.4 GHz + 5GHz + 5 GHz


• 200+ Simultaneous Users




• Beamforming





• Watchdog Timer


DATASHEET: E-LINK Extreme Wave2.0 2100Mbps Tri Band Access Point



RADIO SPECIFICATION


Frequency 2.4 GHz, 5 GHz and 5 GHz (Tri-Band in a single enclosure)






in 1dB step


(BER = 10-6) +/- 2dB

5 GHz






2.4 GHz





256-QAM NA NA


Medium Access
















SECURITY




DATASHEET: E-LINK Extreme Wave2.0 2100Mbps Tri Band Access Point



MANAGEMENT


Remote Configuration

/ Monitoring HTML Web-GUI, E-LINK Controller

Installation

Management























BOX CONTENTS

Each Box Contains

the following items

• E-LINK Extreme Wall/Ceiling Indoor 2 x 2 MU-MIMO Access Point


• LAN Cable






9180-00-20-00 E-Link RAPID Outdoor Integrated Antenna Access Point

E-LINK Rapid 2 x 2 MIMO 1200 Mbps Dual Band Access Point

OVERVIEW

E-LINK Rapid offers 2 x 2 MIMO latest 802.11ac/a/b/g/n

technology with 5dBi antenna to provide excellent coverage and

capacity. It is concurrent Dual-band 2.4/5GHz Wi-Fi Access Point

that provides rapid deployment Outdoor Wi-Fi coverage at

signaling rates up to 900 Mbps on 5 GHz and 300 Mbps on 2.4

GHz. E-LINK Rapid is designed for small outdoor areas requiring

Wi-Fi coverage or a short distance point to point link.

The E-LINK Rapid AC has significantly higher capacity and

increased coverage capabilities over conventional Wi-Fi Access

Points due to a number factors working in concert. These factors

are the latest MU technology.

E-LINK Rapid has on Board Industrial grade PA and LNA which

improved the coverage significantly as compared to any standard

access point.



installation.

For connection into the network the two Gigabit Ethernet interface

on the E-LINK Rapid can connect to a wired backbone.

EION E-LINK Rapid can be configured as a standalone access

point, or as part of a group of APs managed by EION’s Network

Controller. With up to eight different SSIDs per AP, E-LINK Rapid

AC products can form a powerful 3G/4G offload solution for service

providers and enterprises.

PRODUCT FEATURES

• Outdoor 2 x 2 MIMO 802.11ac/a/b/g/n Wi-Fi AP supports dual-band operation in 2.4 GHz & 5.8 GHz

• Dual band - 2.4 GHz + 5GHz


• 128 MAX ; 100+ Simultaneous Users




• Beamforming





• Watchdog Timer





RADIO SPECIFICATION








in 1dB step


(BER = 10-6) +/- 2dB

5 GHz






2.4 GHz





256-QAM NA NA


Medium Access





Operational Mode AP, Gateway, WISP, Repeater Working Mode











SECURITY







MANAGEMENT




Installation

Management























BOX CONTENTS


following items

• E-LINK Rapid Outdoor 2 x 2 MIMO Access Point


• LAN Cable






9180-00-20-10 E-Link Rugged 2 x 2 MIMO Outdoor Access Point; 4 x N-Type External

9180-00-20-20 E-Link Ultra Rugged 2 x 2 MIMO Outdoor Access Point; 4 x N-Type External

E-LINK Rugged & Ultra Rugged 2 x 2 MIMO 1200 Mbps Dual Band Access Point

OVERVIEW

E-LINK Rugged & Ultra Rugged offers 2 x 2 MIMO latest

802.11ac/a/b/g/n technology with 5dBi antenna to provide

excellent coverage and capacity. It is concurrent Dual-band

2.4/5GHz Wi-Fi Access Point that provides Rugged & Ultra

Rugged deployment Outdoor Wi-Fi coverage at signaling rates up

to 900 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. E-LINK Rugged

& Ultra Rugged is designed for small outdoor areas requiring Wi-

Fi coverage or a short distance point to point link.

The E-LINK Rugged & Ultra Rugged AC has significantly higher

capacity and increased coverage capabilities over conventional

Wi-Fi Access Points due to a number factors working in concert.

These factors are the latest MU technology.

E-LINK Rugged & Ultra Rugged has on Board Industrial grade PA

and LNA which improved the coverage significantly as compared

to any standard access point.



installation.

For connection into the network the two Gigabit Ethernet interface

on the E-LINK Rugged & Ultra Rugged can connect to a wired

backbone.

EION E-LINK Rugged & Ultra Rugged can be configured as a

standalone access point, or as part of a group of APs managed by

EION’s Network Controller. With up to eight different SSIDs per

AP, E-LINK Rugged & Ultra Rugged AC products can form a

powerful 3G/4G offload solution for service providers and

enterprises.

PRODUCT FEATURES

• Outdoor 2 x 2 MIMO 802.11ac/a/b/g/n Wi-Fi AP supports dual-band operation in 2.4 GHz & 5.8 GHz

• Dual band - 2.4 GHz + 5GHz


• 128 MAX ; 100+ Simultaneous Users




• Beamforming





• Watchdog Timer





RADIO SPECIFICATION








in 1dB step


(BER = 10-6) +/- 2dB

5 GHz






2.4 GHz





256-QAM NA NA


Medium Access




Network Connection Gigabit Ethernet ports ; Auto MDI-X RJ45 10/100/1000 Mbps Ethernet

Operational Mode AP, Gateway, WISP, Repeater Working Mode











SECURITY







MANAGEMENT




Installation

Management























BOX CONTENTS


following items

• E-LINK Rugged (or Ultra Rugged) Outdoor 2 x 2 MIMO Access Point


• LAN Cable






9170-00-33-20 StarAccess MU-MIMO AC Dual Band, OFDM 3 x 3 MIMO, Smart Integrated Antenna, Dual Gigabit


OVERVIEW

StarAccess AC Indoor offers 2 x 2 MU-MIMO latest

802.11ac/a/b/g/n Wave-2 technology with smart antenna to

provide excellent coverage and capacity. It is concurrent dual-

band 2.4/5GHz WiFi Access Point with Mesh Capabilities that

provides best in class Indoor WiFi coverage at signaling rates up

to 867 Mbps on 5 GHz and 300 Mbps on 2.4GHz. StarAccess

Indoor is designed for medium to large areas requiring Indoor

WiFi coverage.

The StarAccess AC Indoor has significantly higher capacity and



are the latest MU technology, Smart Antenna which provides

minimum to no null coverage spots (see details in antenna

section) MIMO diversity advantage; good output power and

enhanced sensitive receive capability.


interface on the StarAccess AC Indoor can connect to a wired

backbone.

EION StarAccess AC can be configured as a standalone access


Controller. With up to eight different SSIDs per AP, StarAccess

AC products can form a powerful 3G/4G offload solution for

service providers and enterprises.

PRODUCT FEATURES


• Mesh Capability

• 2 x 2 MIMO Technology, up to 867 Mbps on 5GHz and 300 Mbps on 2.4GHz


• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)


• Supports IEEE 802.11d, e, h, l, k, r, v time stamp, and w standards

• Supports Dynamic Frequency Selection (DFS)

• 80, 40 & 20 MHz Channel Sizes

• Watchdog Timer

• User Friendly Web-Based GUI

• SNMPv3 and Enterprise MIB for Advanced Network Management

• High Spectral Efficiency and Robust RF Network Performance

• Built-in ESD Protection with ESD/EMP Immunity, Power Surge POE Protection.

StarAccess AC 2 x 2 Indoor 867 Gbps 2 x 2 MU-MIMO Wave-2 AC Dual

Band Indoor Wi-Fi Access Point with Mesh

Capability

DATASHEET: StarAccess 2300 with Mesh Capability



RADIO SPECIFICATION

Topology Standard Wireless LAN Topology (Multiple Modes Supported); Mesh Cloud

Frequency 2.4 GHz and 5.8 GHz (Dual-Band in a single enclosure)



Signaling Rate Up to 1.3 Gbps on 5 GHz and 450 Mbps for 2.4 GHz

Integrated Antenna [email protected] pyramidal omni smart antenna, 5dBi @ 5GHz pyramidal omni smart antenna


in 1dB step


(BER = 10-6) +/- 2dB

5 GHz






2.4 GHz





256-QAM NA NA


Medium Access






Traffic Management Advanced QoS per user (Hotspot Mode), Standard WMM








Operation Mode Standalone, Hotspot, EION CNMS (Centralized Network Management System)


SECURITY







MANAGEMENT


Remote Monitoring HTML Web-GUI, SNMP v3c (Set, Get and Traps with proprietary MIB)

MIB files are available on request

Installation

Management























BOX CONTENTS

Each Box Contains

the following items

• StarAccess AC Indoor 3 x 3 MU-MIMO Access Point



INTEGRATED ANTENNA PATTERNS






OVERVIEW

StarAccess AC Indoor offers 3x3 MU-MIMO latest

802.11ac/a/b/g/n Wave-2 technology with smart antenna to

provide excellent coverage and capacity. It is concurrent dual-

band 2.4/5GHz WiFi Access Point with Mesh Capabilities that

provides best in class Indoor WiFi coverage at signaling rates up

to 1.3 Gps. StarAccess Indoor is designed for medium to large

areas requiring Indoor WiFi coverage.

The StarAccess AC Indoor has significantly higher capacity and



are the latest MU technology, Smart Antenna which provides

minimum to no null coverage spots (see details in antenna

section) MIMO diversity advantage; good output power and

enhanced sensitive receive capability.


interface on the StarAccess AC Indoor can connect to a wired

backbone.

EION StarAccess AC can be configured as a standalone access


Controller. With up to eight different SSIDs per AP, StarAccess

AC products can form a powerful 3G/4G offload solution for

service providers and enterprises.

PRODUCT FEATURES


• Mesh Capability

• 3 x 3 MIMO Technology, up to 1.3 Gbps


• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)


• Supports IEEE 802.11d, e, h, l, k, r, v time stamp, and w standards

• Supports Dynamic Frequency Selection (DFS)

• 80, 40 & 20 MHz Channel Sizes

• Watchdog Timer




• Built-in ESD Protection with ESD/EMP Immunity, Power Surge POE Protection.

StarAccess AC 3 x 3 Indoor 1.3 Gbps 3 x 3 MU-MIMO Wave-2 AC Dual

Band Indoor Wi-Fi Access Point with Mesh

Capability




RADIO SPECIFICATION

Topology Standard Wireless LAN Topology (Multiple Modes Supported); Mesh Cloud

Frequency 2.4 GHz and 5.8 GHz (Dual-Band in a single enclosure)



Signaling Rate Up to 1.3 Gbps on 5 GHz and 450 Mbps for 2.4 GHz

Integrated Antenna [email protected] pyramidal omni smart antenna, 5dBi @ 5GHz pyramidal omni smart antenna


in 1dB step


(BER = 10-6) +/- 2dB

5 GHz






2.4 GHz





256-QAM NA NA


Medium Access






Traffic Management Advanced QoS per user (Hotspot Mode), Standard WMM








Operation Mode Standalone, Hotspot, EION CNMS (Centralized Network Management System)


SECURITY







MANAGEMENT


Remote Monitoring HTML Web-GUI, SNMP v3c (Set, Get and Traps with proprietary MIB)

MIB files are available on request

Installation

Management























BOX CONTENTS

Each Box Contains

the following items

• StarAccess AC Indoor 3 x 3 MU-MIMO Access Point



INTEGRATED ANTENNA PATTERNS

DATASHEET

Specifications are subject to change without notice INTELLIGENCE IN THE AIR © EION Inc. 2014, All Rights Reserved WWW.EIONWIRELESS.COM

OVERVIEW

EION’s StarPlus 1120-33 is a cost effective and high-performance outdoor radio ideally suited for enterprise and residential users. StarPlus 1120-33 uses EION’s proprietary TrustLink technology, which is built on more than a decade of OFDM experience, to reduce interference and increase throughput.

Operating in the 3.3 to 3.8 GHz frequency range provides WISPs and service providers with options to deploy in the licensed 3.65 GHz band in North America, or the 3.x GHz bands worldwide.

With its high spectral efficiency, large capacity, user friendly GUI and rich feature set, StarPlus is the ideal unlicensed wireless solution for rural and metropolitan broadband requirements.

TRUSTLINK ADVANTAGE

TrustLink™ technology ensures equitable distribution of traffic to all subscriber stations and uses intelligence to determine the number of polling cycles every user gets depending on the level of its activity. This way the network resources are not wasted during the polling of inactive users due to no user data transmission. TrustLink can be employed in both point-to-point and point-to-multipoint networks and dramatically reduces the effects of unwanted interference on the wireless link.

PRODUCT FEATURES

• EION TrustLink™ Technology

• 2 x 2 MIMO

• Suitable for deployment in licensed 3 GHz bands

• High spectral efficiency and robust RF network performance

• Security Management Enhancements

• Large portfolio of external panel and dish antennas or integrated 19dBi panel antenna

• Point-to-Point or Point-to-Multipoint topologies supported

• Real Time RSSI alignment indicator

• Built-in spectrum analyzer & audible antenna alignment beeper and LEDs

• OFDM technology provides NLOS coverage in urban environments

• User friendly web-based GUI

• SNMP v2c and enterprise MIB for advanced network management

• 40 MHz Turbo channel size

• 20 MHz Normal channel size

• 5 & 10 MHz Narrow band channel sizes

StarPlus 1120-33 3.3-3.8 GHz, StarPlus CPE

DATASHEET: StarPlus 1120-33

Specifications are subject to change without notice INTELLIGENCE IN THE AIR 1.15.14 © EION Inc. 2014, All Rights Reserved WWW.EIONWIRELESS.COM

RADIO SPECIFICATION Topology Point-to-Multipoint CPE

Diversity 2 × 2 MIMO (Multiple-In & Multiple-Out)

Frequency* 3.3-3.8 GHz (StarPlus 1120-33)

Channel Size* Quarter: 5 MHz; Half: 10 MHz; Normal: 20 MHz; Turbo: 40 MHz

Channel Spacing 5 MHz × channel number for CF

Modulation MCS 0 to 15 (6.5 to 300 Mbps Data Rate)

Antenna RD: Rapid Deployment Model: Integrated 13.5 dBi dual polarized panel antenna ER: Extended Range Model: 2x N-type antenna connectors.

Max Output Power† +28

Output Power/ Receiver Sensitivity

(BER = 10-6) +/- 1.5dB

Data Rate Tx Power Rx Sens MCS0/8

28 dBm -96 dBm

MCS1/9

27 dBm -96 dBm MCS2/10

26 dBm -93 dBm

MCS3/11


23 dBm -87 dBm

MCS5/13


22 dBm -80 dBm

MCS7/15

20 dBm -77 dBm

Duplexing Format Dynamic Time Division Duplex (TDD), Half-Duplex † Maximum power output is set by country specific licensing key. The operator of this product must ensure compliance when selecting external antennas with the limits specified by local regulation prior to deployment * Frequency bands that are available to the operator are determined by country specific licensing key. NETWORK SPECIFICATIONS

Network Connection RJ45 10/100 BaseT IEEE802.3 complaint with data rates up to 100 Mbps Auto-negotiation or configurable for full/half dulplex


Quality of Service

Advanced QoS with multiple service flows and classifier priorities, four separate levels supported; • VLAN ID (IEEE 802.1q) • VLAN Priority ( IEEE 802.1p) • DSCP/ToS

Fast Frame Aggregation

Yes

Sector Locking/Bridging

Yes, configurable black or white Access Control Lists. Supports intra-sector bridging

VLAN Data Tagging/Untagging, 802.1q transparency, VLAN Management, QinQ NAT 1:N NAT configurable through CPE GUI

DHCP DHCP server for LAN devices when in NAT mode IPv6 IPv6 pass through enabled when CPE works in bridge mode, Tunneling in NAT mode



WIRELESS NETWORKING Medium Access

Control Proprietary MAC, TrustLink™

Output Power Management

Yes

Data Rate Selection Dynamic Adaptive Modulation per Link or manually programmed to fixed modulation type SECURITY

Management Access RADIUS, Username and Password Access is via Hypertext Transfer Protocol Secure HTTPS AES-256 (TLS 1.0+) Compatible with all modern web browsers and Windows 7 OS

Encryption WEP (64, 128, 154), WPA1 (TKIP), WPA2 (CCMP - AES 128, CBC-MAC for headers). Encryption is available in factory firmware and firmware upgrades

MANAGEMENT

Remote Monitoring HTML Web-GUI, SNMP v2c (Set, Get and Traps with proprietary MIB) MIB files are available from eionwireless.com or can be downloaded directly from the StarPlus GUI.

Management IP DHCP client or configurable static IP RADIUS Support RADIUS supported for centralized admin access with fallback mode

User Management Profiles for multiple user roles. Individual user names and passwords are supported in fallback mode

Installation Management

Wireless Link Monitor and Diagnostic Tool; • Provides noise and RSSI signal levels as well as other statistical information • Measure signal strength at each StarPlus location • Real-time view of available over the air bandwidth • Real-Time Link Quality Metrics

Audible Antenna Alignment Beeper (can be switched on or off via SNMP or web GUI) Visual LED Antenna Alignment Built-in Spectrum Analyzer

Syslog Built-in syslog, events can be viewed on the device or exported to an external syslog file for analysis Backup Configuration Save Radio Configuration to local PC

Software Upgrade Over the Air or local, Web-based upgrade, Dual bank to allow rollback Ease of Use Single management view of all deployed products in EION Constellation centralized management system

Location Management

GPS location information can be entered and viewed in external geographical mapping tool



Power Supply

100-240V, 50/60 Hz AC; UL/CSA approved 48 Volt POE system; DC power options available. The included power supply includes one standard Ethernet port for connection to LAN or local PC, and one PoE port for connection to the StarPlus equipment. Power supply is 10/100 BaseT IEEE802.3 complaint with data rates up to 100 Mbps full duplex on both ports

Temperature Range Operating: -25º C to +70º C Storage: -40º C to +90º C

Relative Humidity Operating: 5% to 95% (non-condensing); Storage: Max. 90% (non-condensing) Mounting Bracket Outdoor mounting hardware included. L-Bracket mount is suitable for pole, wall or tower configurations



Enclosure White All-Outdoor ABS/PC, Flame Retardant, UV resistant, IP67 (inclusive of IP66) Each unit includes an RJ45 cable gland to provide a fully weatherproof IP67 seal once installed

Weight 1.2 kg Dimensions 257mm x 257mm x 86mm


Radio and Spectrum Management

Modular radio approvals for CE and FCC Part 90

Weatherproofing IP67 Compliance RoHS/WEEE

Ethernet Standards Complaint to IEEE 802.3i-1990 for 10 BaseT Complaint to IEEE 802.2u-1995 for 100BaseT


1120-33-RD 3.3-3.8 GHz StarPlus CPE with integrated panel antenna 1120-33-ER 3.3-3.8 GHz StarPlus CPE with external antenna

DATASHEET


OVERVIEW

The StarPlus 4448 Broadband Wireless Security Platform is designed for federal government agencies and military organizations to create a highly secure broadband wireless infrastructure. StarPlus 4448 combines advanced OFDM technology with strong AES encryption to deliver breakthrough performance in the licensed NATO band.

With the application of a multiple association software key, the Point-to-Point StarPlus 4448 can be upgraded to operate in a point-to-multipoint mode for wide area coverage. The flexible StarPlus 4448 is the ideal wireless platform to meet the exacting requirements placed on national security infrastructure.

The StarPlus 4448 base radio is packaged in an IP67 ruggedized enclosure is suitable for all weather conditions. The specialized design of the finned enclosure allows for stable operation in high heat environments while the integrated vent plug protects electronics in high humidity conditions. The thick all-metal enclosure provides high EMI immunity for stable operation and secures communications in hostile environments.

TRUSTLINK ADVANTAGE


PRODUCT FEATURES

• Point-to-Point and Point-to Multipoint Topologies

• EION TrustLink™ Technology for security and speed

• AES Encryption

• 4.4 to 4.8 GHz licensed range for operation in the NATO frequency band

• 40 & 20 MHz Channel Sizes

• 10 MHz Narrow Bandwidth Channel Size

• NLOS Urban Coverage with OFDM Technology




• Rugged Construction for All Weather Conditions

• Built-in Lightning, Power Surge POE Protection, High EMI Immunity

StarPlus 4448 Broadband Wireless Security Platform

DATASHEET: StarPlus 4448


RADIO SPECIFICATION

Topology Point-to-Point (Default) Point-to Multipoint Access Point (Requires Upgrade Key)

Frequency* 4.400 to 4.800 GHz

Channel Size* Half: 10 MHz; Normal: 20 MHz; Turbo: 40 MHz

Modulation BPSK, QPSK, 16-QAM and 64-QAM

Signaling Rate Up to 108 Mbps

Antenna N-type female antenna connector

Output Power† +14 dBm to + 20 dBm, configurable in 1dB steps

Receiver Sensitivity (BER = 10-6) +/- 2dB

Modulation 10 MHz 20 MHz 40 MHz BPSK -93 dBm -91 dBm -89 dBm

16-QAM -83 dBm -81 dBm -79 dBm 64-QAM -73 dBm -71 dBm -69 dBm


Medium Access Control Proprietary MAC, TrustLink™

Data Rate Selection Dynamic Adaptive Modulation per Link or manually programmed to fixed modulation type † Maximum power output is set by country specific licensing key. The operator of this product must ensure compliance when selecting external antennas with the limits specified by local regulation prior to deployment * Frequency bands that are available to the operator are determined by country specific licensing key. NETWORK SPECIFICATIONS

Network Connection Auto MDI-X RJ45 10/100 Mbps Ethernet, Manual duplex settings 10/100, Full/Half Dulplex, Over-ride auto negotiation on Ethernet port


Traffic Management Advanced QoS with multiple service flows and classifier priorities - VLAN ID (802.1q), VLAN Priority (802.1p) and DSCP/ToS

Fast Frame Aggregation Yes

Sector Locking Yes, configurable black or white Access Control Lists. VLAN Data Tagging/Untagging, 802.1q transparency, VLAN Management, QinQ

NAT 1:N NAT configurable through CPE GUI DHCP DHCP server for LAN devices when in NAT mode

UL/DL Capacity Adjustment Manual TDD Split for better operator control over UL/DL capacity ratio definition



SECURITY

Management Access Username and Password Compatible with all modern web browsers and Windows 7 OS


MANAGEMENT


Remote Monitoring HTML Web-GUI, SNMP v2c (Set, Get and Traps with proprietary MIB) MIB files are available from eionwireless.com



Audible Antenna Alignment Beeper (can be switched on or off via SNMP or web GUI) Built-in Spectrum Analyzer

Backup Configuration Save Radio Configuration to local PC Software Upgrade Over the Air or local, Web-based upgrade, Dual bank to allow rollback



Power Supply



Relative Humidity Operating: 0% to 100% (condensing); Storage: Max. 90% (non-condensing) Mounting Bracket Pole mounting hardware included

Enclosure Single Unit, Die Cast Metal NEMA 4x; IP67, Finned for heat dissipation Weight 3.2 kg

Dimensions 229 mm × 191 mm × 76 mm Lightning Protection Integrated, Telcordia GR-1089 compliant (Meets IEC 61000-4-2/ 4-4)


Weatherproofing IP67 when properly installed






4448-00-ER StarPlus 4448 - 4.4 to 4.8GHz Connectorized N-Type 7300-58-00-01 StarPlus Multiple Association License Key - 3 Devices 7300-58-00-02 StarPlus Multiple Association License Key - 10 Devices 7300-58-00-10 StarPlus Multiple Association License Key - Unlimited Devices

BOX CONTENTS

Each Box Contains the following items

• StarPlus 4448 Wireless Radio • 48V PoE Injector • Pole mounting bracket • Grounding Lug • Ferrite Bead • Quick Start Guide

DATASHEET


OVERVIEW

The StarPlus 5300 is a high capacity base radio system that offers a competitive alternative to leased lines, wired and optical systems. StarPlus 5300 uses advanced OFDM and MIMO technologies to deliver breakthrough performance in the unlicensed band.

The StarPlus 5300 radio is ready to handle the extreme backhaul loads that originate from today’s data-heavy 4G/LTE based networks.

With the application of a multiple association license key, the StarPlus 5300 can operate in multipoint mode and communicate with StarPlus CPEs. The flexible StarPlus 5300 is the ideal wireless platform to meet the needs of today’s bandwidth hungry users.

The StarPlus 5300 base radio is packaged in a rugged enclosure, which is suitable for all weather conditions. The all-metal enclosure provides high EMI immunity for stable operation in interference prone environments.

TRUSTLINK ADVANTAGE


PRODUCT FEATURES


• 2 x 2 MIMO with software key

• Operates in 4.9 public safety and 5.8 GHz unlicensed bands

• 4G/LTE Backhaul Ready

• Rugged construction for all weather conditions



• Large portfolio of external panel and dish antennas


• Built-in spectrum analyzer & audible antenna alignment beeper

• Up to 300 Mbps data rate over the air, maximum Ethernet throughput is 100 Mbps





• Built-in lightning, power surge PoE protection, high EMI immunity

StarPlus 5300 300 Mbps MIMO Outdoor Base Radio



RADIO SPECIFICATION

Topology Point-to-Point (Default) Point-to Multipoint Access Point (Requires Upgrade Key)

Diversity 1 × 1 SISO (Default) 2 × 2 MIMO (Requires Upgrade Key)

Frequency* 5.000 to 6.100 GHz (StarPlus 5300-58) 4.900 to 5.000 GHz (StarPlus 5300-49)



Modulation MCS 0 to 15 (6.5 to 300 Mbps); BPSK, QPSK, 16-QAM and 64-QAM for LibraPlus mode (6Mbps - 54Mbps), OFDM permits NLOS deployments

Antenna 2x N-type female antenna connectors.

Output Power† +29 dBm aggregate; 2 × 26 dBm per stream (configurable from 9 dBm up to license key limit in 1 dB steps), Manually programmed fixed transmit power level

Receiver Sensitivity (BER = 10-6) +/- 2dB

Modulation

5 MHz

10 MHz

20 MHz

40 MHz MCS0/8

BPSK

-101 dBm

-98 dBm

-95 dBm

-92 dBm

MCS1/9

QPSK1/2

-99 dBm

-96 dBm

-93 dBm

-90 dBm MCS2/10

QPSK3/4

-96 dBm

-93 dBm

-90 dBm

-87 dBm

MCS3/11

16-QAM1/2

-95 dBm

-92 dBm

-89 dBm

-84 dBm MCS4/12

16-QAM2/3

-91 dBm

-88 dBm

-85 dBm

-81 dBm

MCS5/13

64-QAM2/3

-87 dBm

-84 dBm

-81 dBm

-77 dBm MCS6/14

64-QAM3/4

-85 dBm

-82 dBm

-79 dBm

-76 dBm

MCS7/15

64-QAM5/6

-81 dBm

-78 dBm

-75 dBm

-74 dBm

Duplexing Format Dynamic Time Division Duplex (TDD), Half-Duplex Radio Feature

Support Dynamic Frequency Selection (DFS)

Spectral Efficiency 6.5 bits per Hertz † Maximum power output is set by country specific licensing key. The operator of this product must ensure compliance when selecting external antennas with the limits specified by local regulation prior to deployment * Frequency bands that are available to the operator are determined by country specific licensing key. NETWORK SPECIFICATIONS

Network Connection MDI-X RJ45 10/100/1000 Mbps Ethernet; Auto-negotiation or configurable for full/half dulplex at 10/100 Mbps


Quality of Service

Advanced QoS with multiple service flows and classifier priorities, four separate levels supported; • VLAN ID (IEEE 802.1q) • VLAN Priority ( IEEE 802.1p) • DSCP/ToS


Yes










Yes




MANAGEMENT









Location Management




Power Supply



Relative Humidity Operating: 0% to 100% (condensing); Storage: Max. 90% (non-condensing) Mounting Bracket Rugged outdoor mounting hardware included, 2-Axis pole/wall



Enclosure Single Unit, Die Cast Metal NEMA 4x; IP67 Each unit includes an RJ45 cable gland to provide a fully weatherproof IP67 seal once installed

Weight 2.0 kg Dimensions 230 mm × 230 mm × 65 mm

Lightning Protection Integrated, Telcordia GR-1089 compliant (Meets IEC 61000-4-2/ 4-4) STANDARDS COMPLIANCE


Adheres to Industry Canada Spectrum Management and Telecommunications Radio Standards Adheres to RSS-111 Issue 3 for Broadband Public Safety Equipment Operating in the band 4940-4990 MHz Adheres to RSS-210 Issue 8 License-exempt Radio Apparatus (all frequency bands): Category 1 Equipment Adheres to FCC Part 15 Approved for WPC (India)




5300-58 5 GHz StarPlus 5300 Base Radio, IP67 Ruggedized Enclosure 5300-49 4.9 GHz StarPlus 5300 Base Radio, IP67 Ruggedized Enclosure

9530-00-00-10 StarPlus Upgrade Speed Key to Two Streams - Upgrade StarPlus 5300 base radio to two streams MIMO 7300-58-00-01 StarPlus Multiple Association License Key - 3 Devices 7300-58-00-02 StarPlus Multiple Association License Key - 10 Devices 7300-58-00-10 StarPlus Multiple Association License Key – Unlimited Devices

DATASHEET


OVERVIEW

The StarPlus 5300-33 is a high capacity base radio system that offers a competitive alternative to leased lines, wired and optical systems. StarPlus 5300-33 uses advanced OFDM and MIMO technologies to deliver breakthrough performance.

Operating in the 3.3 to 3.8 GHz frequency range provides WISPs and service providers with options to deploy in the licensed 3.65 GHz band in North America, or the 3.x GHz bands worldwide.

With the application of a multiple association license key, the StarPlus 5300 can operate in multipoint mode and communicate with StarPlus CPEs. The flexible StarPlus 5300-33 is the ideal wireless platform to meet the needs of today’s bandwidth hungry users.

The StarPlus 5300-33 base radio is packaged in a rugged enclosure, which is suitable for all weather conditions. The all-metal enclosure provides high EMI immunity for stable operation in interference prone environments.

TRUSTLINK ADVANTAGE


PRODUCT FEATURES


• 2 x 2 MIMO with software key

• Suitable for deployment in licensed 3 GHz bands

• Rugged construction for all weather conditions



• Large portfolio of external panel and dish antennas


• Built-in spectrum analyzer & audible antenna alignment beeper





• Built-in lightning, power surge PoE protection, high EMI immunity

StarPlus 5300-33 3.3-3.8 GHz, MIMO Outdoor Base Station



RADIO SPECIFICATION Topology Point-to Multipoint Base Station

Diversity 1 × 1 SISO 2 × 2 MIMO

Frequency* 3.3-3.8 GHz (StarPlus 5300-33)



Modulation MCS 0 to 15 (6.5 to 300 Mbps Data Rate)

Antenna 2x N-type female antenna connectors.

Max Output Power† +28 dBm

Output Power/ Receiver Sensitivity

(BER = 10-6) +/- 1.5dB

Data Rate Tx Power Rx Sens MCS0/8

28 dBm -96 dBm

MCS1/9


26 dBm -93 dBm

MCS3/11


23 dBm -87 dBm

MCS5/13


22 dBm -80 dBm

MCS7/15

20 dBm -77 dBm

Duplexing Format Dynamic Time Division Duplex (TDD), Half-Duplex † Maximum power output is set by country specific licensing key. The operator of this product must ensure compliance when selecting external antennas with the limits specified by local regulation prior to deployment. * Frequency bands that are available to the operator are determined by country specific licensing key. NETWORK SPECIFICATIONS

Network Connection MDI-X RJ45 10/100/1000 Mbps Ethernet; Auto-negotiation or configurable for full/half dulplex at 10/100 Mbps


Quality of Service

Advanced QoS with multiple service flows and classifier priorities, four separate levels supported; • VLAN ID (IEEE 802.1q) • VLAN Priority (IEEE 802.1p) • DSCP/ToS


Yes










Yes




MANAGEMENT









Location Management




Power Supply



Relative Humidity Operating: 0% to 100% (condensing); Storage: Max. 90% (non-condensing) Mounting Bracket Rugged outdoor mounting hardware included, 2-Axis pole/wall



Enclosure Single Unit, Die Cast Metal NEMA 4x; IP67 Each unit includes an RJ45 cable gland to provide a fully weatherproof IP67 seal once installed

Weight 2.0 kg Dimensions 230 mm × 230 mm × 65 mm

Lightning Protection Integrated, Telcordia GR-1089 compliant (Meets IEC 61000-4-2/ 4-4) STANDARDS COMPLIANCE


Modular radio approvals for CE and FCC Part 90




5300-33 3.3-3.8 GHz StarPlus 5300 Base Radio, IP67 Ruggedized Enclosure 9530-00-00-10 StarPlus Upgrade Speed Key to Two Streams - Upgrade StarPlus 5300 base radio to two streams MIMO 7300-58-00-01 StarPlus Multiple Association License Key - 3 Devices 7300-58-00-02 StarPlus Multiple Association License Key - 10 Devices 7300-58-00-10 StarPlus Multiple Association License Key – Unlimited Devices

DATASHEET Mobilink 1050

MOBILINK 1050 eNodeB with EPC Single Cell Multi-Platform eNodeB with Integrated EPC

PRODUCT FEATURES • Receiver gain enhanced for compact range and coverage capability, up to 24 dBm power • Available with optional antenna pack for quick setup and installation • Integrated EPC that supports

• PS data • CS Voice using CSFB and VoLTE • HSS integration, using Diameter • Intra - MME handover • Multiple eNodeBs • Web based management

• Gigabit Ethernet connectivity

• Client devices – Indoor, Outdoor, Dongle • GigE interface for connection to StarPlus and

Teralink for flexible backhaul options

• GPS/ QZSS/ GLONASS/ BeiDou

• 5, 10, 15, 20 MHz channels

• Ruggedized outdoor enclosure, IP67

OVERVIEW Mobilink 1050 is a small form factor ultra cost effective FDD & TDD-LTE eNodeB providing up to 24 dBm power in general, and higher in case of TDD supporting single cell. It is intended for outdoor deployments. It also has an integrated Evolved Packet Core (EPC) supporting eNodeB and UEs. Mobilink 1050 has significantly compact range and increased coverage capabilities over conventional eNodeBs for enterprise market. It offers N-type connectors for mounting different external antenna options and RJ16 connectors for GPS support for time synchronization to complement different backhaul transport time synchronization methods. For connection into the network the Gigabit Ethernet interface on the Mobilink 1050 can connect to a wired backbone, or seamlessly to an EION StarPlus network or our high capacity Teralink network for wireless backhaul where Gigabit Ethernet is provided as standard. Mobilink is a solution both for rural and urban deployments that provide superior coverage and capacity. Mobilink 1050 with integrated EPC provides carrier grade RAN solution. Mobilink 1050 supports PS data, third-party HSS integration, MME handover and web based management. Mobilink 1050 supports Bands 3, 7, 38, 40, 41, 42 and 43.

Product Name Product Description Product Code


Band Frequency (MHz) FDD/TDD

3 1710 - 1785, 1805 - 1880 FDD

7 2500 - 2570, 2620 - 2690 FDD

38 2570 - 2620 TDD

40 2300 - 2400 TDD

41 2496 - 2690 TDD

42 3400 - 3600 TDD

43 3600 - 3800 TDD

Mobilink 1050 FDD Band 3, 1.8 GHz Outdoor LTE eNodeB Enterprise

Mobilink 1050

MT-OD-ENT-EPC-03-1

Mobilink 1050 TDD Band 38, 2.6 GHz Outdoor LTE eNodeB Enterprise

Mobilink 1050

MT-OD-ENT-EPC-38-1

Mobilink 1050 TDD Band 41, 2.5 GHz Outdoor LTE eNodeB Enterprise

Mobilink 1050 Antenna Pack One Transceiver per unit

MT-OD-ENT-EPC-41-1

MT-OD-ENT-ANT-1

FDD Band 7, 2.6 GHz Outdoor LTE eNodeB Enterprise MT-OD-ENT-EPC- 07-1

TDD Band 40, 2.3 GHz Outdoor LTE eNodeB Enterprise MT-OD-ENT-EPC-40-1

Mobilink 1050 TDD Band 42, 3.5 GHz Outdoor LTE eNodeB Enterprise MT-OD-ENT-EPC-42-1

Mobilink 1050 TDD Band 43, 3.7 GHz Outdoor LTE eNodeB Enterprise MT-OD-ENT-EPC-43-1

Medium Access Control

Network Connection

Traffic Management

Filtering

DHCP

IPv6

Standard LTE

Gigabit Ethernet Connectivity, Auto MDI-X RJ45 10/100/1000 Mbps Ethernet, Auto Negotiation

Standard Layer 2, Layer 3 Traffic Management through scheduler and rate control

RF Sniffing

DHCP server in controlling wireless side, NAT

IPv6 pass through in bridge mode

QoS IP and Port based prioritization

Topology

Antennas

Frequency Range

Channel Size

Transceiver

RF Connectors

Output Power

GPS Connectivity

Time Synchronization

Duplexing Format

LTE Bands

Standard Wireless LTE Topology

2x2 MIMO per radio with an optional antenna pack

1.7 – 1.8 GHz, 2.3 GHz – 3.8 GHz (Please check below LTE Bands for exact frequencies),

5, 10, 15, 20 MHz

1 Transceiver per unit

N-Type for external antenna connectors

Radio: up to +24 dBm (FDD), up to +27 dBm (TDD) per physical port

GPS – RJ16, Data – N- Type

GPS, QZSS, GLOSNASS, BeiDou (PTP 1588 v2, SyncE)

LTE TDD, LTE-FDD

3, 7, 38, 40, 41, 42, 43

DATASHEET Mobilink 1050 Radio

Network Support

eNodeB Support HSS integration with Diameter, Intra-MME Handover, Multiple eNodeBs support, Unlimited UEs

Integrated EPC

Application Support PS data, CS voice using CSFB, CS voice using VoLTE

Management Access Username and password

Security

Standard 3GPP standard LTE air interface security, IPSEC AES Encrypted tunnels on all network connections

Remote Management

Management Access

EPC Management

Backup Configuration

Software Upgrade

OAM (CM, PM, FM, Diagnostics), Web-GUI, SNMP v2

Over the Air/Wired, Secure Boot through digital signatures of all executables

Web based management

Download backup configuration files

Management

Web-GUI

Mounting Bracket

Power Consumption

Input Voltage

Operating Temperature

Environmental

Enclosure

Relative Humidity

Radio Certification

Lightning Protection

Dimensions

Weight

Yes, 2-Axis pole/wall

< 25W

100-240V, 50/60 Hz AC with 56 V PoE 802.3af

-30 C to +50 C

RoHS and WEEE

Single Unit, Die Cast NEMA 4x; IP67

0 to 100%, condensing

~FCC

Built-in ESD

Radio: 270 mm x 200 mm x 65 mm (Excluding antennas)

Radio: ~2 kg, less than 4 kg With Antenna Pack: 3.5 kg

Physical, Electrical, and Environmental

~ in progress

Specification are subject to change without notice ©EION Inc. 2017, Ottawa, CANADA, All Rights Reserved Mobilink 1000 3.07.17.v5


3 1710 - 1785, 1805 - 1880 FDD

7 2500 - 2570, 2620 - 2690 FDD

38 2570 - 2620 TDD

40 2300 - 2400 TDD

41 2496 - 2690 TDD

42 3400 - 3600 TDD

43 3600 - 3800 TDD

DATASHEET Mobilink 2050

MOBILINK 2050 eNodeB with EPC Single Cell Multi-Platform eNodeB with Integrated EPC

PRODUCT FEATURES • Receiver gain enhanced for Metro and coverage capability, up to 27 dBm • Integrated EPC that supports

• PS data • CS Voice using CSFB and VoLTE • HSS integration, using Diameter • Intra – MME handover • Multiple eNodeBs • Web based management

• Available with optional antenna pack for quick setup and installation • Outdoor operation in Bands 3, 7, 38, 40, 41, 42 and 43 • Supporting multivendor LTE compliant devices

• Gigabit Ethernet connectivity

• GigE interface for connection to StarPlus for flexible backhaul options • Variety of Antenna options: SISO/MIMO in Directional, 60°, 90°, 120°, and 360° (Omni)

• GPS/ QZSS/ GLONASS/ BeiDou

• 5, 10, 15, 20 MHz channels

• Ruggedized outdoor enclosure, IP67

• 2x2 spatial diversity MIMO with high receive sensitivity 1W transmit power

OVERVIEW Mobilink 2050 is a small form factor ultra cost effective FD &TDD-LTE eNodeB providing up to 27 dBm and up to 30 dBm with 1W TX power per antenna port. It is intended for outdoor deployments. It also has an integrated Evolved Packet Core (EPC) supporting eNodeB and UEs. Mobilink 2050 has significant range and increased coverage capabilities over conventional eNodeBs for metro market. It offers N-type connectors for mounting different external antenna options and SMA connectors for GPS support for time synchronization to complement backhaul transport time synchronization methods. For connection into the network the Gigabit Ethernet interface on the Mobilink 2050 can connect to a wired backbone, or seamlessly to an EION StarPlus or a Teralink network for wireless backhaul where a high capacity Gigabit Ethernet is provided as standard. EION Mobilink can be configured as a standalone eNodeB, or as part of a group of eNodeBs managed by EION’s Network Controller. Mobilink is a metro solution both for rural and urban deployments that provide superior coverage and capacity. Mobilink provides carrier grade RAN solution. Mobilink 2050 interoperates seamlessly with other eNodeBs that have third party EPC vendor solutions and authentication solutions. Mobilink 2050 supports Bands 3, 7, 38, 40, 41, 42 and 43.

Mobilink 2050 FDD Band 3, 1.8 GHz Outdoor LTE eNodeB Metro

Product Name

Mobilink 2050

Product Description Product Code

MT-OD-MET-EPC-03-1


Mobilink 2050 TDD Band 38, 2.6 GHz Outdoor LTE eNodeB Metro

Mobilink 2050

MT-OD-MET-EPC-38-1

Mobilink 2050 TDD Band 41, 2.5 GHz Outdoor LTE eNodeB Metro

Mobilink 2050 Antenna Pack One Transceiver per unit

MT-OD-MET-EPC-41-1

MT-OD-MET-ANT-1

FDD Band 7, 2.6 GHz Outdoor LTE eNodeB Metro MT-OD-MET-EPC- 07-1

TDD Band 40, 2.3 GHz Outdoor LTE eNodeB Metro MT-OD-MET-EPC-40-1

Mobilink 2050 TDD Band 42, 3.5 GHz Outdoor LTE eNodeB Metro MT-OD-MET-EPC-42-1

Mobilink 2050 TDD Band 43, 3.7 GHz Outdoor LTE eNodeB Metro MT-OD-MET-EPC-43-1

Medium Access Control

Network Connection

Traffic Management

Filtering

DHCP

IPv6

Standard LTE

Gigabit Ethernet Connectivity, Auto MDI-X RJ45 10/100/1000 Mbps Ethernet, Auto Negotiation

Standard Layer 2, Layer 3 Traffic Management through scheduler and rate control

RF Sniffing

DHCP server in controlling wireless side, NAT

IPv6 pass through in bridge mode

QoS IP and Port based prioritization

Topology

Antennas

Frequency Range

Channel Size

Transceiver

RF Connectors

Output Power

GPS Connectivity

Time Synchronization

Duplexing Format

LTE Bands

Standard Wireless LTE Topology

2x2 MIMO per radio with an optional antenna pack

1.7 – 1.8 GHz, 2.3 GHz – 3.8 GHz (Please check below LTE Bands for exact frequencies),

5, 10, 15, 20 MHz

1 Transceiver per unit

N-Type for external antenna connectors

Radio: Up to +27 dBm to 30 dBm, Up to 1W Transmit power

GPS – SMA, Data – N- Type

GPS, QZSS, GLOSNASS, BeiDou (PTP 1588 v2, SyncE)

LTE TDD, LTE FDD

3, 7, 38, 40, 41, 42, 43

DATASHEET Mobilink 2050 Radio

Network Support

eNodeB Support HSS integration with Diameter, Intra-MME handover, Multiple eNodeBs support

Integrated EPC

Application Support PS data, CS voice using CSFB, CS voice using VoLTE

Management Access Username and password

Security

Standard 3GPP standard LTE air interface security, IPSEC AES Encrypted tunnels on all network connections

Remote Management

Management Access

EPC Management

Backup Configuration

Software Upgrade

OAM (CM, PM, FM, Diagnostics), Web-GUI, SNMP v2

Over the Air/Wired, Secure Boot through digital signatures of all executables

Web based management

Download backup configuration files

Management

Web-GUI

Mounting Bracket

Power Consumption

Input Voltage

Operating Temperature

Environmental

Enclosure

Relative Humidity

Radio Certification

Lightning Protection

Dimensions

Weight

Yes, 2-Axis pole/wall

< 25W

100-240V, 50/60 Hz AC with 48 V PoE 802.3af

-35 C to +55 C

RoHS and WEEE

Single Unit, Die Cast NEMA 4x; IP67

0 to 100%, condensing

~FCC

Built-in ESD

Radio: 315 mm x 165 mm x 80 mm (including fins)

Radio: Less than 4 kg

Physical, Electrical, and Environmental

Specification are subject to change without notice ©EION Inc. 2017, Ottawa, CANADA, All Rights Reserved Mobilink 2000 3.07.17.v5


3 1710 - 1785, 1805 - 1880 FDD

7 2500 - 2570, 2620 - 2690 FDD

38 2570 - 2620 TDD

40 2300 - 2400 TDD

41 2496 - 2690 TDD

42 3400 - 3600 TDD

43 3600 - 3800 TDD

mobilink cat7 lte outdoor cpe - tellumat.com · datasheet: e-link blaze wave2.0 1200 mbps dual band...

Documents