model 199 case sealer continuous-motion case · pdf filerobust construction stainless steel...
TRANSCRIPT
© Copyright 2013 Standard-Knapp, Inc. – 513-200
* Standard-Knapp is committed to continuous product improvement. Specifications are subject to change without notice. All dimensions are approximate.
** Speeds from 50–75 cpm require an optional speed kit with extended compression module.
Model: 199 Case Sealer
Speed: 30 - 75 cpm **
Voltage: 230/460V, 60Hz, 3 Phase
Air Supply: 60psi with ½" NPT
Control Voltage: 24 VDC
Interface: User-friendly HMI touch-screen
Case Specifications: Corrugated, RSC or Primed Flaps
Manuals: Available on CD-ROM
Case Dimensions (min. – max.): Length: 7" – 24"
Width: 5.5" – 19"
Height: 5" – 18"
Hot Melt Unit: Nordon ProBlue 7 ® shown *
Glue Pattern: Changed with the push of a button
Construction: Rust-Proof Stainless Steel
Footprint: 12' L × 5'6" W
Assembled in: Portland, CT U.S.A.
Model 199 Case SealerStandard Features*
STANDARD-KNAPP, INC.63 Pickering Street, Portland, CT 06480 U.S.A.SALES: (860) 342-1100, ext. 239SALES FAX: (860) 342-1557EMAIL: [email protected]
www.standard-knapp.com
Model 199 Case Sealer Floor Plan
Continuous-MotionCase Sealer
For sealing Primed Flap and Re-shipper (RSC) cases
SK-201305-199 Case Sealer 4-pg Bro_199 Case Sealer 5/29/13 10:43 AM Page 1
Robust ConstructionStainless steel tubular frame
High ReliabilityDesigned for 24/7 operation
Simple OperationUser-friendly HMI touch-screencontrol panel
No Guard DoorsAccess to sealer is safeguardedby light curtains to allow for easyentry for changeover ormaintenance
Quick, Positive ChangeoverOne operator can completechangeover in less than 2 minutes
Quality Fit and FinishProudly assembled in the U.S.A.
Walk-by MaintenanceTM
Quick, easy system statusassessment
"Bowtie" Flap Tucker
The "bowtie" rotates 180˚ toaccurately fold the rear flap,following the case until theflap meets the flap guide.The "bowtie" is servo-controlled for reliable,configurable operation.Laminate constructionensures that the "bowtie" isdurable and built to last.A pneumatic flap tuckerdesign will be used forspeeds of 35 cpm or less.
Filled cases enter the case sealerfrom the packer.
Entering
Hot Melt Glue System
One hose, four (4) low-cavity moduleensures reliable gluing and virtually no-dripoperation. Dual-side case sensors ensureaccurate glue placement. Infeed gluepattern is changed with the push ofa button (shy-top flaps may requiretwo 2-cavity modules).
The Standard-Knapp 199 Case Sealer is a continuous-motion inline machine that allows forconsistent sealing of all incoming cases whether integrated with the discharge of a case packeror installed as a stand-alone machine (integrated shown).
• On-demand servo controlled flap tucker ensures precise timing and consistent glue pattern.Pneumatically controlled flap tucker is also available for slower speeds.
• Designed with fewer moving parts to reduce downtime.
• Continuous-motion, inline case handling permits consistent sealing. Speeds of 50-75 cpm areachievable with addition of optional speed kit (includes high-speed flap tucker and extendedcompression module).
• Robust, proven compression section utilizes standard friction belt to easily handle lightweightcases and eliminates the need for side belts.
• Dual side case sensors ensure accurate glue placement.
• Sealed-flange bearings for long life and maintenance-free operation.
Continuous-Motion Case SealerModel 199
The center flap guide folds thefront minor flap down, then theservo-controlled "bowtie" flaptucker folds the trailing minor flap.
Tucking
Hot glue is applied to the frontand rear minor flaps by a4-module glue applicator.
Gluing
The side flap guides fold the leftand right major flaps onto the hotglue, sealing the case.
Folding
Compression rollers apply firmpressure onto the flaps as theglue cools and cures, ensuringa solid, fully-sealed case.
Compressing
FLOW
FLOW FLOW
SK-201305-199 Case Sealer 4-pg Bro_199 Case Sealer 5/29/13 10:43 AM Page 2
© Copyright 2013 Standard-Knapp, Inc. – 513-200
* Standard-Knapp is committed to continuous product improvement. Specifications are subject to change without notice. All dimensions are approximate.
** Speeds from 50–75 cpm require an optional speed kit with extended compression module.
Model: 199 Case Sealer
Speed: 30 - 75 cpm **
Voltage: 230/460V, 60Hz, 3 Phase
Air Supply: 60psi with ½" NPT
Control Voltage: 24 VDC
Interface: User-friendly HMI touch-screen
Case Specifications: Corrugated, RSC or Primed Flaps
Manuals: Available on CD-ROM
Case Dimensions (min. – max.): Length: 7" – 24"
Width: 5.5" – 19"
Height: 5" – 18"
Hot Melt Unit: Nordon ProBlue 7 ® shown *
Glue Pattern: Changed with the push of a button
Construction: Rust-Proof Stainless Steel
Footprint: 12' L × 5'6" W
Assembled in: Portland, CT U.S.A.
Model 199 Case SealerStandard Features*
STANDARD-KNAPP, INC.63 Pickering Street, Portland, CT 06480 U.S.A.SALES: (860) 342-1100, ext. 239SALES FAX: (860) 342-1557EMAIL: [email protected]
www.standard-knapp.com
Model 199 Case Sealer Floor Plan
Continuous-MotionCase Sealer
For sealing Primed Flap and Re-shipper (RSC) cases
SK-201305-199 Case Sealer 4-pg Bro_199 Case Sealer 5/29/13 10:43 AM Page 1