model “btu”, “bru” & “bst” gas-fired tubular unit heaters · 2004-11-11 ·...
TRANSCRIPT
260 North Elm Street 5211 Creekbank RoadWestfield, MA 01085 ♦ Mississauga, Ontario L4W 1R3 CanadaTel. (413) 562-5423 Tel. (905) 625-2991Fax (413) 572-3764 Fax (905) 625-6610
CATALOG NO.: BTUPC-5SUPERCEDES: BTUPC-4
MODEL “BTU”, “BRU” & “BST”GAS-FIRED TUBULAR
UNIT HEATERSREPLACEMENT PARTS
CATALOGINDEXWARRANTY INFORMATION – RETURN GOODS ........................................................................2BRU/BTU CONVERSION KITS .....................................................................................................3HIGH ALTITUDE ADJUSTMENT....................................................................................................3BST-30/75 SEPARATED COMBUSTION REPLACEMENT PARTS .......................................... 4, 5BRU/BTU-30/90 LOW PROFILE REPLACEMENT PARTS........................................................6, 7BTU-100/400 REPLACEMENT PARTS ..........................................................................8, 9, 10, 11OPTIONAL PARTS .......................................................................................................................12TERMS .........................................................................................................................................13
IMPORTANTWHEN ORDERING PARTS, PLEASE
SPECIFY UNIT MODEL NO. AND SERIAL NO.
Beacon/Morris
www.beacon-morris.com
Beacon/Morris
2
IMPORTANTWARRANTY INFORMATION
If you are ordering a replacement part for a unit which you believe to be underwarranty, the process is as follows:
• Provide Beacon-Morris with a description of the part or assembly neededand the model and serial number of the unit which experienced failure. Ifthere is a question on the warranty, we can answer it at this point.
• We will enter your order and issue you a R.G.A. (Return Goods Authorization),if applicable, with instructions on how and where to send the defective parts.
• Your invoice will indicate “no charge” pending the return of the applicabledefective parts. The invoice may list the R.G.A number and state: “a R.G.A.has been issued. Reinvoicing will occur if no receipt in 30 days.” However,some parts are to be field scrapped, which the invoice will state accordingly.If parts are received by us within the 30 days, and confirmed as “defectivein-warranty”, the transaction will be closed.
If we do not receive the parts within 30 days or our inspection reveals a non-warranty condition, then a subsequent invoice will be generated indicating theappropriate cost and we will no longer accept returns on that R.G.A.
In order to insure the orderly processing of your warranty claim it isMANDATORY that certain paper work accompany any and all goods returned toSterling. It is also mandatory that goods be sent to the proper location.
In order to assure proper handling of these goods we insist that under allcircumstances we must formally authorize the return of material to our variousfacilities. Any material returned without authorization will not be accepted.
In order to insure that your properly authorized returns are accepted at ourplant, we ask that you clearly mark any and all shipping papers with an R.G.A.number; we will not accept shipments that do not clearly show R.G.A. number on theoutside of the box or crate!
All returns to be shipped Freight Prepaid. Collect Shipmentswill not be accepted.
CONSULT OUR CUSTOMER SERVICE DEPT. FOR ANY REPLACEMENTPARTS NOT LISTED IN THIS PUBLICATION. LIMITED AVAILABILITY ON
CERTAIN OBSOLETE EQUIPMENT.TEL. 413-564-5423 FAX# 413-572-3764
MINIMUM CHARGE $35.00 – ORDERS WITH AN INVOICE OFLESS THAN $35.00 NET WILL BE INVOICED AT $35.00
3
CONVERSION KITS “BRU/BTU/BST” SERIES UNITSWITH HOT SURFACE IGNITION CONTROLS
CONVERTING FROM NAT. GAS TO LP GAS CONVERTING FROM LP GAS TO NAT. GAS
MODELNO.
BRU/BTU/BST-30/75BRU/BTU-90BTU-100/400BTU-175/300**
MODELNO.
BRU/BTU-30/75BRU/BTU-90BTU-100/400BTU-350/400*
CONVERSIONKIT NO.
261R04865261R05410261R04867261R04869
CONVERSIONKIT NO.
261R04866261R05412261R04868261R04952
*For units manufactured prior to June 13, 2001, equippped with White Rodgers gas valve.**For units manufactured prior to June 13, 2001, equipped with 1/2" inlet and 3/4" outlet Honeywell smart valve.These kits include components for normal altitude 0-2,000 ft. (610m) conversions only.Contact customer service for any hi-altitude conversions.
HIGH ALTITUDE ADJUSTMENTS
NATURAL GAS PROPANE GAS
HeatingValue*
Btu/Cu. Ft.Altitude(Feet)
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
6,000
6,500
7,000
7,500
8,000
8,500
9,000
9,500
10,000
3.2
3.2
3.2
3.1
3.1
3.1
3.0
3.0
2.9
2.9
2.9
2.8
2.8
2.7
2.6
2.6
2.5
948
931
914
897
881
865
849
833
818
802
787
771
756
741
726
711
696
*Consult local gas utility for actual (Btu/Cu. Ft.) heating value
ManifoldPressure(In. W.C.)
HeatingValue*
Btu/Cu. Ft.
ManifoldPressure(In. W.C.)
2278
2237
2196
2156
2116
2077
2039
2000
1964
1927
1891
1853
1817
1781
1745
1709
1673
10.0
10.0
10.0
10.0
10.0
9.9
9.7
9.6
9.5
9.3
9.2
9.0
8.9
8.7
8.5
8.3
8.1
NATURAL GAS PROPANE GAS
HeatingValue*
Btu/Cu. Ft.Altitude(Feet)
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
6,000
6,500
7,000
7,500
8,000
8,500
9,000
9,500
10,000
948
931
914
897
881
865
849
833
818
802
787
771
756
741
726
711
696
ManifoldPressure(In. W.C.)
HeatingValue*
Btu/Cu. Ft.
ManifoldPressure(In. W.C.)
2278
2237
2196
2156
2116
2077
2039
2000
1964
1927
1891
1853
1817
1781
1745
1709
1673
8.6
8.5
8.4
8.4
8.3
8.2
8.1
8.0
7.9
7.7
7.6
7.5
7.4
7.2
7.1
6.9
6.8
3.5
3.5
3.3
3.2
3.2
3.2
3.1
3.1
3.0
3.0
2.9
2.9
2.8
2.8
2.7
2.7
2.6
Model: “BTU”Capacity: 100-400 MBH
Model: “BRU”, “BTU” & “BST”Capacity: 30-90 MBH
Beacon-Morris model “BRU” and ”BTU” units may be fired at full input up to 2,000 feet (610m) above sea level.Above 2,000 feet (610m), manifold pressure must be adjusted on most units.Adjust the gas valve pressure regulator to the pressure shown in the tables below.
5
502R06420
J31R04091
J32R04840J34R04767-002261R04963-002
257R04587-011 (5)J26R01960 (5)
251R06610251R04719
251R04714251R06630
251R06615
251R06617
502R06419
J31R04766
J32R04884J34R04767-001261R04963-001
257R04587-011 (3)J26R01960 (3)
251R06609251R04718
251R04713251R06629
251R06614
251R06616
3507R06686-001
J37R04684-045
257R06604
507R04696-045
261R06577-045
J37R04693J36R04694-001J36R04694-004J38R03421-001J38R03421-002
252R06603
J28R04979-001J28R04979-002
252R06423J11R00366
J14R03245-012J11R02877-002
J10R03410J09R04609J11R04768
257R06621
J35R04700507R04725
507R04964-001507R04876
J40R01745-014251R04702
252R04730H07R06627
J07R06593J07R02872-001J07R02872-004J40R00605-003J40R00601-001
J26R06480J40R02876-001J23R01130-017
J21R01287
NO. OF TUBES, BUNERS ORIFICES REQ'D PER MODELVESTIBULE PANEL/TUBE ASS'Y (HEAT EXCHANGER)BURNER BOX SUB-ASS'YMANIFOLDINSHOT BURNER
STANDARD ORIFICENATURAL GASPROPANE (LP) GAS
PILOT BURNER ASS'YNATURAL GASPROPANE (LP) GAS
PILOT MOUNTING BRACKETPILOT TUBINGHONEYWELL SV9540 NATURAL GASGAS VALVE, SINGLE STAGE PROPANE (LP) GASMANIFOLD MOUNTING ANGLE (2 PER UNIT)FAN TIME DELAY SWITCHTRANSFORMER, 50 VA, 115/24VAIR PRESSURE SWITCH*DRAFTOR RELAYTERMINAL BLOCK PLATEHIGH LIMIT SWITCH W/ MOUNTING BRACKETFAN MOTOR (ODP)INLET AIR COLLAR ASS'YOSHA FAN GUARDSTANDARD FANFAN / GUARD / MOTOR MOUNT HARDWARE KIT**FLUE COLLECTORPOWER VENTER (DRAFTER) ASS'YFLUE COLLAR ASS'YVINYL TUBING (PRESSURE SWITCH)POWER VENTER MOUNTING PLATELOUVER (QTY. REQ'D PER MODEL)LOUVER SPRINGS (QTY. REQ'D PER MODEL)BURNER BOX FRONT PANELSERVICE PANELHOSE CLAMP (2 PER UNIT)TOP / BOTTOM PANEL W / INSULATIONFRONT JACKETREAR / SIDE JACKET PANELHANGER (FRONT AND REAR)INLET AIR HOSETUBE SUPPORT BRACKET KITMETAL HOLE PLUGLARGE GROMMETSMALL GROMMETPIPE UNIONPIPE NIPPLESPRINGPRESSURE TAP FITTINGPRESSURE TAP FITTING NUTGROUND SCREWBURNER BOX VIEW PORT PANELBURNER BOX INLET AIR PANEL(INCLUDES WIRE SEAL BRACKETS)
MODEL “BST” 30-75 MBH “SEPARATED COMBUSTION”REPLACEMENT PARTS
1234
5
6
78
9
1011121314
14A1516171819202122232425262728293031323334353637383940414243444546
47
5507R06688-001
J37R04684-075
257R06604
507R04696-075
261R06577-075
“SF” MODEL SIZE (MBH)ITEMNO. PART NO.ITEM DESCRIPTION
60 7530 45
Notes:*** A draftor relay is not required when your unit is equipped with a Honeywell SV9540 Gas Valve.
*** When replacing a flue collector, make sure that the flue collector box is sealed completely to the vestibule panel using RTV Sealant.
2507R06685-001
J37R04684-030
257R06605
507R04696-030
261R06577-030
4507R06687-001
J37R04684-060
257R06605
507R04696-060
261R06577-060
7
MODELS “BTU/BRU” 30-90 MBH “LOW PROFILE”REPLACEMENT PARTS
NO. OF TUBES, BURNERS ORIFICES REQ’D PER MODEL
VESTIBULE PANEL/TUBE ASS'Y (HEAT EXCHANGER)
MANIFOLD BRACKET SUB-ASS'Y
MANIFOLD
INSHOT BURNER
STANDARD ORIFICENATURAL GAS
PROPANE (LP) GAS
PILOT BURNER ASS'YNATURAL GAS
PROPANE, (LP) GAS
PILOT MOUNTING BRACKET
PILOT TUBING
HONEYWELL SV9500M NATURAL GAS
GAS VALVE, SINGLE STAGE PROPANE (LP) GAS
HONEYWELL SV9540M NATURAL GAS
GAS VALVE, SINGLE STAGE PROPANE (LP) GAS
MANUAL ROLLOUT SAFETY SWITCH [RF UNIT TYPE ONLY]
FAN TIME DELAY SWITCH
TRANSFORMER, 50 VA, 115/24
AIR PRESSURE SWITCH
*DRAFTOR RELAY
TERMINAL BLOCK PLATE
HIGH LIMIT SWITCH W/ MOUNTING BRACKET
FAN MOTOR (ODP)
STANDARD FAN GUARD [TF MODELS]
OSHA FAN GUARD [REQ'D ON RF MODELS; OPT'L ON TF]
STANDARD FAN
FAN/GUARD/MOTOR MOUNT HARDWARE KIT
**FLUE COLLECTOR
POWER VENTER (DRAFTER) ASS'Y
FLUE COLLAR ASSEMBLY
VINYL TUBING (PRESSURE SWITCH)
POWER VENTER MOUNTING PLATE
LOUVER [QTY. REQ'D PER MODEL]
LOUVER SPRING [QTY. REQ'D PER MODEL]
SERVICE PANEL
TOP/BOTTOM PANEL W/ INSULATION
SPRING (FOR VINYL TUBING)
FRONT JACKET
HANGER (FRONT AND REAR)
GROUND SCREW
REAR/SIDE JACKET PANEL
TUBE SUPPORT BRACKET KIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14A
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
31
32
34
35
36
37
251R04702
J26R06480
261R04962-002
J31R04091253R01873-001
J32R04840
J10R03410
J09R04609
J11R04768
4507R04674
261R04961-060
J37R04684-060
261R04962-001J28R05042-001 (Replacement Valve is a Honeywell SV9501 Series)
J28R05042-002 (Replacement Valve is a Honeywell SV9501 Series)J28R04979-001
J28R04979-002
J11R04849J11R00366
J14R03245-012
J38R03421-001J38R03421-002
252R04737
5507R04675
261R04961-075
J37R04684-075
J36R04694-006
J36R04694-010
J11R04927-002
J34R01836-008
507R04942-090
J35R04581507R04946
N/A
90“BTU”/“BRU” MODEL SIZE (MBH)ITEMNO. PART NO.ITEM DESCRIPTION
60 7530 45
507R04696-030
Notes:*** A draftor relay is not required when your unit is equipped with a Honeywell SV9540 or SV9640 Gas Valve (the relay function is built into the control).
*** When replacing a flue collector, make sure that the flue collector box is sealed completely to the vestibule panel using RTV Sealant.
3
507R04673
261R04961-045J37R04684-045
261R04962-002
507R04696-045
J37R04693
J36R04694-001J36R04694-004
2
507R04672261R04961-030
J37R04684-030
261R04962-001
J11R04927-001
J31R04766J32R04723
J32R04884
J34R04767-001261R04963-001 261R04963-002
507R04696-060
J35R04700507R04725
261R04964-001
507R04876
J34R04767-002
507R04696-075
252R04730
J21R01287
251R06467 251R06468-001 251R06468-002261R06577-030 261R06577-045 261R06577-060 261R06577-075
251R04713
257R04587-011 [3]
J26R01960 [3]
251R04718
257R04587-011 [5]
J26R01960 [5]
251R04719
251R04714
8
MODEL “BTU” 100-400 MBHREPLACEMENT PARTS
Figure 3 Figure 4
Figure 5
D4858D4858
D4860D4954
*
* 3/8-16 Threaded Rod recommended
9
MODEL “BTU” 100-400 MBHREPLACEMENT PARTS
Figure 6Vestible Panel/Tube Assembly(Heat Exchanger)
Figure 7Electrical Control Panel
Figure 8Manifold Burner Assembly
D4955
10
MODEL “BTU” 100-400 MBHREPLACEMENT PARTS
NO. OF TUBES, TURBULATORS, BURNERS, ORIFICES REQ’D PER MODEL
VESTIBULE PANEL/TUBE ASS’Y (HEAT EXCHANGER)ALUMINUM
409 STAINLESS STEEL
MANIFOLD BRACKET SUB-ASS’Y
MANIFOLD
INSHOT BURNER
STANDARD ORIFICENATURAL GAS, #42
PROPANE (LP) GAS, #53
NATURAL GAS
PILOT BURNER ASS’Y PROPANE (LP) GAS
NATURAL GAS (WHITE-RODGERS VALVE)†
PILOT MOUNTING BRACKET
PILOT TUBING
HONEYWELL SV(9500/9600) NATURAL GAS
GAS VALVE, SINGLE STAGE PROPANE (LP) GAS
HONEYWELL SV(9540/9640) NATURAL GAS
GAS VALVE, SINGLE STAGE PROPANE (LP) GAS
WHITE-RODGERS GAS VALVE, SINGLE STAGE† NATURAL GAS
IGNITOR, NATURAL GAS
FAN TIME DELAY SWITCH
TRANSFORMER, 50 VA, 115/24
AIR PRESSURE SWITCH
*DRAFTOR RELAY
TERMINAL BLOCK PLATE
HIGH LIMIT SWITCH [QTY. REQ’D PER MODEL]
HIGH LIMIT BRACKET [QTY. REQ’D PER MODEL]
FAN MOTOR (100/400 MODELS) (ODP) 24" and 28" wire leads only
FAN MOTOR (300,350 & 400 MODELS ONLY) (ODP)52" wire lead only
STANDARD FAN GUARD [QTY. REQ’D PER MODEL]
OSHA FAN GUARD [QTY. REQ’D PER MODEL]
STANDARD FAN [QTY. REQ’D PER MODEL]
FAN/GUARD/MOTOR MOUNT HARDWARE KIT [QTY. REQ’D PER MODEL]
**FLUE COLLECTOR
***POWER VENTER (DRAFTER) ASS’Y
FLUE COLLAR ASSEMBLY
VINYL TUBING (PRESSURE SWITCH)
TURBULATOR
LOUVER [8 REQ’D PER MODEL]
LOUVER SPRING [8 REQ’D PER MODEL]
RIGHT SIDE JACKET PANEL W/ INSULATION
LEFT SIDE JACKET PANEL W/ INSULATION
TOP JACKET PANEL W/ INSULATION
BOTTOM JACKET PANEL W/ INSULATION
ELECTRICAL CONTROL BOX COVER
ELECTRICAL CONTROL BOX BASE (WRAPPER)
PEEP HOLE BURNER COVER ASSEMBLY
GROUND SCREW
WASHER (4 PER UNIT)
261R04965-004
J36R03872-003J36R03872-002J38R03421-001J38R03421-002
N/A252R03892
261R04962-003 [Lgth. = 24 in.]J28R05042-001
J28R05042-002 (Replacement Valve is a SV9501 Series)J28R04979-001J28R04979-002
N/AN/A
J11R00366J14R03245-012J11R04927-001
J10R03410J09R04609
J11R00306-002 [1]252R04469 [1]
N/A253R01873-001 [1]
J32R04840 [1]
261R04963-002 [1]
J35R04700257R05062
261R04964-002501R03893
257R04587-008J26R01960261R04966261R04967
261R04968-004261R04969-004
257R03888257R03889
261R05411-004J21R01287
J24R00326-005
4507R04567-004507R04567-104
J37R04277J37R03935
J31R04092
J34R05944 [1]
507R03918-004
5507R04568-004507R04568-104
J37R04278J37R03935
J31R04093-001
J34R05945 [1]
507R03918-005
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14A
15
16
17A
17B
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Notes:*** A draftor relay is not required if your unit is equipped with a Honeywell SV9450 or SV9640 Gas Valve (the relay function is built into the control).
*** When replacing a flue collector, make sure that the flue collector box is sealed completely to the vestibule panel using RTV Sealant.
*** Unit sizes 100, 125, 150 require power vent mounting plate 507R04876.
† For units manufactured prior to June 13, 2001 (sizes 350 and 400 only).
125“BTU” MODEL SIZE (MBH)ITEMNO. PART NO.ITEM DESCRIPTION
100
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14A
15
16
17A
17B
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
16507R04575-004507R04575-104
J37R04283J37R03935
507R03922-016
261R04962-004 [Lgth. = 28 in.]
J11R04927-001
8507R04571-004507R04571-104
J37R04279J37R03935
507R03920-008
J11R04927-002
J31R04094-001
253R01874-001 [1]J32R04843 [1]J34R05946 [1]
507R03922-014
N/AJ28R05043-004J28R04980-003J28R04980-004
J28R00742J28R02722
J31R04094-001J31R04094-002
253R01874-001 [2]J32R04843 [2]J34R05946 [2]
507R04595507R04600
261R04964-004
257R04587-010
261R04968-012261R04969-012
261R05411-012
J38R04578-001
MODEL “BTU” 100-400 MBHREPLACEMENT PARTS
J35R04581507R04532
261R04964-003
257R04587-009
261R04968-007261R04969-007
261R05411-007
261R04968-004261R04969-004
261R05411-004
257R03888257R03889
J35R04700257R05062
261R04964-002
10507R04572-004507R04572-104
J37R04280J37R03935
J36R03872-003J36R03872-002J38R03421-001J38R03421-002
252R03892
507R03920-010
J37R04281J37R03935
261R04963-002 [1]
J11R00366J14R03245-012
J11R00306-002 [2]252R04469 [2]
J21R01287J24R00326-005
7507R04570-004507R04570-104
J10R03410J09R04609
501R03893
14507R04574-004507R04574-104
J37R04282J37R03935
J28R05043-003 (Replacement Valve is a SV9601 Series)J28R05043-002 (Replacement Valve is a SV9601 Series)
J28R04980-003J28R04980-002 (1/2" x 3/4") or J28R04980-004 (3/4" x 3/4")
6507R04569-004507R04569-104261R04965-004
J37R04278J37R03935
507R03918-006
261R04965-012J37R04279J37R03935
J31R04093-001
J34R05945 [1]
J26R01960
N/A
261R04962-003 [Lgth. = 24 in.]
261R04966261R04967
400
PART NO.
150 250175 200 300 350
J28R05042-001…J28R05042-002…
J28R04979-001J28R04979-002
J11R04927-001
253R01873-001 [1]J32R04840 [1]
257R04587-008
507R03920-007
12507R04573-004507R04573-104
J31R04093-001J31R04093-002
253R01873-001[2]J32R04840 [2]J34R05945 [2]
507R03922-012
J11R00306-002 [1]252R04469 [1]
N/AN/A
261R04963-002 [2]
261R04965-007
N/A
ITEMNO.
12
MODEL “BTU/BRU”REPLACEMENT PARTS
J28R05121
J13R00812
J13R01284-001
J13R02081
J13R00814
J13R00813
J13R03362
J13R00811
J13R00954
J13R01383
J10R00818-003
J37R02222-001
J37R02222-002
J37R02222-003
ASRX2-001
ASRX2-002
ASRX2-003
ASRX3-001
ASRX3-002
ASRX3-003
ASRX4-001
ASRX4-002
ASRX4-003
ASRX5-004
ASRX5-007
ASRX5-012
J11R05597-001
J11R05597-002
ASRM4
ASRM5
PRESSURE REGULATOR (125 PSI TO 7") NATURAL GAS
T87F 1-STAGE
Q539A-1006 SUBBASE FOR T87F
T834H 1-STAGE W/FAN SWITCH (STERLING LOGO)
T874F 2-STAGE
Q674C-1009 SUBBASE FOR T874F
T6169C 1-STAGE LINE VOLTAGE (115V) W/SUBBASE
T822D 1-STAGE
TG500A-1045 UNIVERSAL THERMOSTAT GUARD
TG503-1000 METAL GUARD W/LOCKING COVER FOR T87F WITHOUT SUBBASE
24V SPST RELAY
VENT CAP 4"
VENT CAP 5"
VENT CAP 6"
30 DEGREE NOZLE KIT (100-150)
30 DEGREE NOZZLE KIT (175-250)
30 DEGREE NOZZLE KIT (300-400)
60 DEGREE NOZZLE KIT (100-150)
60 DEGREE NOZZLE KIT (175-250)
60 DEGREE NOZZLE KIT (300-400)
90 DEGREE NOZZLE KIT (100-150)
90 DEGREE NOZZLE KIT (175-250)
90 DEGREE NOZZLE KIT (300-400)
VERTICAL LOUVER KIT (BTU100-150)
VERTICAL LOUVER KIT (BTU175-250)
VERTICAL LOUVER KIT (BTU300-400)
HIGH ALTITUDE* PRESSURE SWITCH (30, 45, 60, 75, 100, 125, 150, 300, 350, 400)
HIGH ALTITUDE* PRESSURE SWITCH (90, 175, 200, 250)
VERTICAL CONCENTRIC VENT KIT (BST UNITS ONLY)
HORIZONTAL CONCENTRIC VENT KIT (BST UNITS ONLY)
“BTU”/“BRU” FIELD INSTALLED OPTIONS AND THERMOSTATS
PART NO.DESCRIPTION
*For units operating at elevations of 5,000-11,999 ft.
13
TERMS
LIMITED WARRANTYThe product described in this catalog are warranted by Beacon-Morris, A Mestek Co. to be free from defects in
material and workmanship for a period of one (1) year from the date of shipment from Beacon-Morris' plant.Beacon-Morris will repair or replace, at its option, any components which, upon inspection, it finds to be defective,
provided that the unit has been operated within its listed capacity, has been installed in accordance with the furnishedinstructions, has not been misused or subject to negligence and has received reasonable and necessary maintenance.This warranty does not cover labor costs or other cost incurred in repairing, removing, installing, servicing or handling ofparts or complete products.
Beacon-Morris will in no event be liable for incidental or consequential damages of any kind whatsoever.The buyer must request written permission from Beacon-Morris to return defective components and then must send
them with all transportation charges prepaid to the plant designated in the written permission.This warranty is extended only to the original purchaser from Beacon-Morris.
ALL SHIPMENTS ARE F.O.B. FARMVILLE, N.C.FREIGHT ROUTING SHALL BE AT THE DISCRETION OF THE SHIPPER
PRICES: Published trade prices in effect at time of receipt of order at our office are firm provided the complete orderis released for fabrication and shipment within 6 months from date of receipt of written order at the factory. Releases forshipment after 6 months will be billed on the basis of trade prices in effect at time of release.
No obligation is assumed by this Corporation to sell, to anyone holding this book, any of the items listed herein atthe prices stated.
TERMS: Net 30 Days.Prepaid freight or cartage charges paid by us and added to invoice are not subject to cash discount.
TAXES: The prices listed herein exclude Federal, State, or Municipal Tax applicable to the transaction. Such taxes,where applicable to the transaction should be paid directly to the governing authority by the Purchaser.
CLAIMS: As all goods are shipped at buyer's risk they should be examined carefully before signing transportationdelivery receipts. If transportation company tenders delivery of goods in bad order, buyer should insist on transportationagent making notation of conditions on delivery receipt and request an inspection within 48 hours, thus enabling buyer tosecure prompt payment of transportation claims filed by him for value of damaged material.
The responsibility of this company ceases upon delivery of goods in order to transportation companies. All ordersare accepted subject to delays on account of government requirements, strikes, accidents or other causes beyond ourcontrol.
MINIMUM ORDERS: Orders with an invoice value of less than $35.00 will be invoiced at $35.00.
RETURNED GOODS: Goods must not be returned except by written permission from the factory, and when soreturned will be accepted only as stated in the following conditions:
1. Special material is not subject to return.2. All transportation charges for returned goods must be prepaid by shipper.3. Standard catalogued products may be returned upon written permission. After inspection at the factory, if they are
found to be in good condition they will be accepted for credit, subject to a 25% handling charge.4. No goods will be accepted for return more than 90 days after shipment.
CHANGES TO A RELEASED ORDER – Work commences on release of an order, therefore, an order that ischanged will be subject to additional charges for any extra time and material expended.