model based design of controlled release drug delivery...
TRANSCRIPT
![Page 1: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/1.jpg)
1Copyright © 2012 Tata Consultancy
Services Limited
Model based design of controlled
release drug delivery systems
Aditya Pareek, Praduman Arora, Venkataramana Runkana
![Page 2: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/2.jpg)
2
Why we need controlled drug delivery?
Advantages of controlled drug delivery• Maintains therapeutic drug level for
prolonged periods of time
• Achieves predictable release rates
• Reduces dosing frequency and increase patient compliance
• Deploys to a target site and thus limits side effects
Limitations of conventional delivery• Low bio-availability
• Frequent dosage leading to poor patient compliance
• Steady state concentration unattainable
Novel drug vehicles are being developed to achieve this target.
![Page 3: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/3.jpg)
3
Controlled Drug Delivery Systems
• Polymer Hydrogels
- Environment responsive hydrogel (pH, Glucose, Temperature)
• Polymer particles (Chitosan, PLGA (Poly (Lactic-co-Glycolic Acid))
• Inorganic nanoparticles (Silica, Gold)
• Micro needles, Carbon nanotubes
• Vesicular systems: Liposomes, Solid Lipid Nanoparticles
• Micro-emulsions, Nano-emulsions
• These drug carriers along with new potential routes of drug administration (Transdermal, Subcutaneous, Ocular) are being utilized to achieve controlled and targeted drug delivery
![Page 4: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/4.jpg)
4
• Biodegradable polymer degrades into smaller biocompatible compounds and ultimately to CO2 , N2 and H2O
• This property allows synthesis of drug loaded polymer particles that can protect and thus release drug over extended period of time in vivo
• E.g. PLGA (Poly(lactic-co-glycolic Acid), Polyanhydride, Polycaprolactone
Biodegradable polymers as potential
DDS
Polymer degradation (Hydrolysis)
Entrapped Drug
Polymer Matrix
Degradation products
Voids
Drug Release
![Page 5: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/5.jpg)
5
Typical Drug Release Profile
Initial burst Lag phase
Secondary burst
Final phase
Duvvuri S. et al., Pharm Res, 2006, 23(1). 215-223
![Page 6: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/6.jpg)
6
Schematic of phenomena involved
during drug release
Initial burst Lag phase
Secondary burst
Final phase
![Page 7: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/7.jpg)
7
Ideal drug release kineticsC
um
ula
tive D
rug R
ele
ase
Time (Days)
Cum
ula
tive D
rug R
ele
ase
Time (Days)
Zero Order Release Pulsatile Release
What should be the specifications of a biodegradable particle to achieve a desired release profile?
![Page 8: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/8.jpg)
8
Aim of this work
• Develop a mathematical model for controlled delivery of drugs with polymer particles as carrier
The model can thus help us reduce time, efforts and expenses by minimizing the requirement for design experiments.
Synthesis ConditionsSynthesis method (W/O/W), W/O/O, S/O/O),Temperature,
Emulsifier
Drug Release
Profile
Comparison
Polymer BlendsBlending Ratio,
Functionalization
Polymer PropertiesType of polymer, Molecular
weight Distribution
Optimization
Mathematical
Model
Carrier
SpecificationsSize, Degradation
![Page 9: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/9.jpg)
9
Diffusive Drug Release (Fick’s Law)
𝜀 𝑡 is porosity of the polymer matrix. 𝜏 is the mean time for pore formation.𝜎2 is the variance in time required to form pores.
Mathematical Model
𝐷𝑒𝑓𝑓 = 𝐷𝜀(𝑡)𝜕𝐶𝐴𝜕𝑡= 𝛻 𝐷𝑒𝑓𝑓𝛻𝐶𝐴
Polymer Matrix Degradation (Pore Formation)
𝜀 𝑡 =1
2𝑒𝑟𝑓
𝑡 − 𝜏
2𝜎2+ 1
**
** Rothstein SN et al., J Mater Chem, 2008,18(16):1873–1880
![Page 10: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/10.jpg)
10
• Degradation rate constant for the two phases was calculated by fitting 𝑀𝑤 =𝑀𝑤0 exp −𝑘𝑖𝑡
• 𝜏𝑖 was calculated using equation 𝜏𝑖 =−1
𝑘𝑖ln
𝑀𝑤𝑟
𝑀𝑤0
• 𝜏 = 𝑖 𝜏𝑖
𝑛; where, i = number of phases
considered
• The variance, 𝜎2, was calculated for this 𝜏𝑖 distribution
Estimation of Degradation Parameters
0
2
4
6
8
10
12
14
16
18
0 20 40 60
Mo
lec
ula
r W
eig
ht×
10
4
Time (Days)
Polymer Degradation
Amorphous
Crystalline
Grayson A. et al., J BioMater Sci Polym Ed, 2004, 15(10), 1281-1304.
![Page 11: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/11.jpg)
11
• Particle Radius (Rp) can be calculated by Particle Size Analyzer (DLS, SEM)
• Occlusion Size (Rocc) can be calculated by averaging the sizes of randomly selected occlusions, from Scanning Electron Microscope (SEM)
𝑅𝑜𝑐𝑐 = 𝑖 𝑅𝑜𝑐𝑐𝑖𝑛
D. Klose et. Al, Int J Pharm, 2006, 314(2), 198-206.
N. Faisant et. al, Eur J Pharm Sci,2002, 15(4), 355-366
Estimation of Parameters
![Page 12: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/12.jpg)
12
COMSOL Implementation
• A Spherical matrix is considered with radius Rp loaded uniformly with drug at concentration, CA0
• Due to spherical symmetry, the problem was solved in 1D
• Two subdomain are considered, so drug flow is either pore mediated or free-flowing
• Physics used: Transport of Diluted
Species (chds)• 𝜀(𝑡) was defined as a variable to
calculate porosity of the matrix
• A function 𝐹 𝑡 = 1 − 𝑉−1 𝐶𝐴
𝐶𝐴0𝑑𝑉
was defined to calculate cumulative drug release
Boundary Conditions
Position Condition
r = 0 dCA/dr = 0
r = Rp CA = 0
![Page 13: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/13.jpg)
13
Rp = 3.7 µmRocc = 0.52 µmPolymer:PLGA 50:50Drug: Melittin (Anti-cancer Therapy)Mw0 : 9.5 kDaτ = 13.32 daysσ2 = 4.59 days2
F. Cui et al.,J Control Release, 2005, 107(2), 310–319.
0
0.2
0.4
0.6
0.8
1
1.2
0 5 10 15 20 25 30 35
Cu
mu
lati
ve D
rug
Rele
ase
Time (Days)
Experiment
Simulatuion
Model Validation
![Page 14: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/14.jpg)
14
Optimizing the Design of Microparticles
Synthesis ConditionsSynthesis method (W/O/W), W/O/O, S/O/O),Temperature,
Emulsifier
Drug Release
Profile
Comparison
Polymer BlendsBlending Ratio,
Functionalization
Polymer PropertiesType of polymer, Molecular
weight Distribution
Optimization
Mathematical
Model
Carrier
SpecificationsSize, Degradation
![Page 15: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/15.jpg)
15
Dependency of Initial burst on Occlusion and particle size:
𝑳𝒂𝒈 𝑷𝒆𝒓𝒊𝒐𝒅 𝒅 = 0.92τ − 0.36𝜎2
Dependency of Lag Period on τ and σ2:
Models for initial burst and lag period
These models give us a good initial guess of the specifications of a polymer particle required to achieve desired release profile
𝑰𝒏𝒊𝒕𝒊𝒂𝒍 𝑩𝒖𝒓𝒔𝒕 = −5.06 1 − 𝑅𝑜𝑐𝑐
𝑅𝑝
6
+ 3.97 1 − 𝑅𝑜𝑐𝑐
𝑅𝑝
3
We performed a large number of simulations and developed empirical models for two critical properties of release kinetics
![Page 16: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/16.jpg)
16
Optimizing Drug Release using Polymer
Blends
Duvvuri S. et al., Pharm Res, 2006, 23(1). 215-223
0.0
0.2
0.4
0.6
0.8
1.0
0 5 10 15 20 25 30 35C
um
ula
tive D
rug
Rele
ased
Time (days)
PLGA
FAD-SA
3:1 FAD-SA:PLGA
Experiments Simulations
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0 5 10 15 20 25
Cu
mu
lati
ve D
rug
Rele
ased
Time (Days)
PLGA
Resomer
PLGA:Resomer
FAD:SA – Poly(Fatty acid dimer:Sebacic Acid) Anhydride
Resomer® – Commercial poymer
A near Zero order release of insulin was achieved using a polymer blend of PLGA and Poly-anhydride
![Page 17: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/17.jpg)
17
Summary
• A model to study drug release from biodegradable polymer was implemented in COMSOL
• The model was validated with relevant experimental data• Simplified models were derived for initial burst and lag phase from
simulation data obtained using the rigorous model• These models were used to find specifications of a polymer particle
required to achieve zero order release of insulin
![Page 18: Model based design of controlled release drug delivery systemscn.comsol.com/paper/download/210181/runkana_presentation.pdf · • Micro-emulsions, Nano-emulsions • These drug carriers](https://reader033.vdocument.in/reader033/viewer/2022042711/5f6c43e5d29f943b8d400da6/html5/thumbnails/18.jpg)
Thank You
IT Services
Business Solutions
Consulting