model curriculum€¦ · jewellery piece with required flexibility and durability 13 ; 3 . 10 ;...

Model Curriculum Filer and Assembler

SECTOR:

SUB-SECTOR:

OCCUPATION:

REF ID:

NSQF LEVEL:

GEM & JEWELLERY

CAST AND DIAMONDS-SET JEWELLERY

FILING AND ASSEMBLING

G&J/Q2901, VERSION 1.0

3

TABLE OF CONTENTS

01

04

1. Curriculum

2. Trainer Prerequisites

3. Annexure: Assessment Criteria 05

Filer and Assembler CURRICULUM / SYLLABUS

This program is aimed at training candidates for the job of a “Filer and Assembler”, in the “Gem & Jewellery” Sector and aims at building the following key competencies amongst the learner

Program Name Filer and Assembler

Qualification Pack Name & Reference ID. ID

Filer and Assembler G&J/Q2901, version 1.0

Version No. 1.0 Version Update Date 14 – 12 – 2015

Pre-requisites to Training Preferably 10th standard Passed

Training Outcomes After completing this programme, participants will be able to: • File and assemble the cast jewellery piece: Filing and assembling procedure

of unfinished jewellery pieces post casting process.• Respect and maintain IPR: Respecting intellectual property rights of

company’s products and designs to avoid infringement.• Coordinate with others: Encouraging artisan to work as a team and multitask

and communicate with colleagues.• Maintain occupational health and safety: Familiarising artisan towards

potential hazards in order to make work environment safe for everyone.

Filer and Assembler 1

This course encompasses 4 out of 4 National Occupational Standards (NOS) of “Filer and Assembler” Qualification Pack issued by “Gem & Jewellery Skill Council of India”.

Sr. No. Module Key Learning Outcomes Equipment Required 1 File and

assemble the cast jewellery piece.

Theory Duration (hh:mm)

05:00

Practical Duration (hh:mm)

40:00

Corresponding NOS Code G&J/N2901

• To cut sprues

• To operate and use different types of files

• To know the Technique of soldering

• To operate and use hand motor

• To detect and rectify casting defects.

• To link components as per designs

• To understand and rectify measurement of jewelleryas per job sheet

• To understand properties of findings and solderingthem

• To finish the soldered parts

• To control loss of precious metal

Different types of files, hand motor, emery paper, gas torch, solder, flux, Petri dish, mandrel, sizes of steel rod, pliers, cutter, sprue cutter,

2. Respect and maintain IPR


01:00


00:30


• To get firm understanding of what is IntellectualProperty Rights.

• To have knowledge of basic IPR and patent laws.• To Prevent and protect manufacturing techniques

practised in the company.• To know company policies related to IPR.• To understanding and take action of what to do in

case of violation of IPR rules. • To understand what all IPR is inclusive of.• To know direct relation of IPR violation and its

effect on company’s competitiveness in market.

wheel buff, rubber wheel, emery paper, magnetic polisher, vibrator, centrifuge machine, pickling tank, gloves, goggles, wax or lac, roll filing or grinder, 10X loupe, hand vice.

3. Coordinate with others


01:00

Practical Duration

• To follow the reporting structure.

• To Coordinate with various departments as requiredfor e.g. Inventory control for new tools, repair of oldtools.

• To learn smooth working with colleagues of otherdepartments such as frame making, polishing,setters etc.

• To learn sharing of workload.


Sr. No. Module Key Learning Outcomes Equipment Required (hh:mm)

01:00


4. Maintain occupational health and safety


01:00


00:30


• To learn importance of Personal hygiene.

• To maintain cleanliness of bench and tools.

• To avoid accidents while using machines, sharp toolsgas torches, acids from pickling tank.

• To report electrical problems.

gloves, goggles

Total Duration


08:00


42:00

Unique Equipment Required:

Different types of files, hand motor, emery paper, gas torch, solder, flux, Petri dish, mandrel, sizes of steel rod, pliers, cutter, sprue cutter, wheel buff, rubber wheel, emery paper, magnetic polisher, vibrator, centrifuge machine, pickling tank, gloves, goggles, wax or lac, roll filing or grinder, 10X loupe, hand vice.

Grand Total Course Duration: 50 Hours 00 Minutes

(This curriculum has been approved by Gem & Jewellery Skill Council of India)


Trainer Prerequisites for Job role: “Filer and Assembler” mapped to Qualification Pack: “G&J/Q2901”

Sr. No.

Area Details

1 Job Description To deliver accredited training service, mapping to the curriculum detailed above, in accordance with the Qualification Pack “G&J/Q2901”, Version 1.0.

2 Personal Attributes Aptitude for conducting training, and pre/post work to ensure competent, employable candidates at the end of the training. Strong communication skills, interpersonal skills, ability to work as part of a team; a passion for quality and for developing others; well-organised and focused, eager to learn and keep oneself updated with the latest in the mentioned field.

3 Minimum Educational Qualifications

Minimum 10th Standard Passed

4a Domain Certification Certified for Job Role: Filer and Assembler mapped to QP: Filer and Assembler. Minimum accepted score as per SSC guidelines is 75% on the SSC prescribed online theory assessment test based on an industry validated question bank.

4b Platform Certification Recommended that the Trainer is certified for the Job Role: “Trainer”, mapped to the Qualification Pack: “SSC/Q1402”. Minimum accepted score for the trainer is 75% as per SSC guidelines.

5 Experience Minimum of 3-year experience at Supervisor or Team Leader or Manager level.


Annexure: Assessment Criteria

Assessment Criteria for Filer and Assembler Job Role Filer and Assembler Qualification Pack G&J/Q2901, version 1.0 Sector Skill Council Gem & Jewellery Skill Council of India

Sr. No.

Guidelines for Assessment

1 Criteria for assessment for each Qualification Pack has been created by the Sector Skill Council. Each Performance Criteria (PC) has been assigned marks proportional to its importance in NOS. SSC has laid down proportion of marks for Theory and Skills Practical for each PC.

2 The assessment for the theory part must be based on knowledge bank of questions created by the SSC.

3 Assessment agencies will create unique practical tests for skill evaluation in consultation with GJSCI for candidates at every examination/training centre. (as per assessment criteria below). Behaviour and attitude also must be assessed while the student is performing the practical.

4 To pass this Qualification Pack, every candidate should score a minimum of 50% in theory and 70% in practical to successfully clear the assessment.


Marks Allocation

ASSESSMENT OUTCOME (NOS CODE AND DESCRIPTION)

Assessment criteria (PC) Total

Marks (60+40)

Out of Theory Skills Practical

1.G&J/N2901 Fileand assemble thecast jewellery piece

PC1. remove sprues and extra metal to achieve finish as per design requirement with minimum precious metal, diamond and stone loss

75

11 1 10

PC2. link components of different product types as per design requirement and utility of the product

6 1 5

PC3. assemble different parts of jewellery piece with required flexibility and durability

13 3 10

PC4. repair the casting defects in the jewellery pieces as per the QC policy of the company

7 2 5

PC5. deliver product in time to the next stage in the process flow

5 0 5

PC6. file and assemble number of jewellery pieces as per target deliverable and quality approved by the supervisor

12 2 10

PC7. appropriately finish surfaces required as per QC policy

11 1 10

PC8. achieve minimum precious metal and stone loss after filing

5 0 5

PC9. achieve maximum number of quality control approved jewellery piece

5 0 5

NOS Total

75 10 65

2.G&J/N9901Respect and maintain IPR

PC1. be able to spot plagiarism and report

9

3 2 1

PC2. be aware of patents and IPR 4 1 3

PC3. not be involved in IPR violations

2 1 1

NOS Total

9 4 5

3.G&J/N9902Coordinate withothers

PC1. understand the work output requirements 8

2 1 1

1 0 1


Marks Allocation

ASSESSMENT OUTCOME (NOS CODE AND DESCRIPTION)

Assessment criteria (PC) Total

Marks (60+40)

Out of Theory Skills Practical

PC2. comply with company policy and rule

PC3. deliver quality work on time as required by reporting any anticipated reasons for delays

1 0 1

PC4. put team over individual goals

1 1 0

PC5. be able to resolve conflicts 1 0 1

PC6. learn how to multi-task relevant activities

2 1 1

NOS Total

8 3 5

4. G&J/N9905Maintainoccupationalhealth and safety

PC1. spot and report potential hazards on time

8

2 1 1

PC2. follow company policy and rules regarding use of hazardous materials

2 0 2

PC3. attend and actively participate in the health and safety campaigns organised by the company

2 1 1

PC4. use or wear safety gear as per the rules of the company

2 1 1

NOS Total 8 3 5

QP Total 100 20 80


Gems & Jewellery Skill Council of IndiaBusiness Facilitation Centre, 3rd Floor, SEEPZ SEZ, Andheri (E), Mumbai 400 096

model curriculum€¦ · jewellery piece with required flexibility and durability 13 ; 3 . 10 ;...

Documents