model exam complete answers gd jp
TRANSCRIPT
-
7/30/2019 Model Exam Complete Answers Gd Jp
1/31
-
7/30/2019 Model Exam Complete Answers Gd Jp
2/31
1.Write down the relation between static
temperature, stagnation temperature and mach
number for the case of an isentropic flow.
-
7/30/2019 Model Exam Complete Answers Gd Jp
3/31
2.A plane travels at a velocity of 1600 kmph at an
altitude of 8000 m. Find the mach angle and mach
number.
-
7/30/2019 Model Exam Complete Answers Gd Jp
4/31
3.Give one example each for Fanno flow and
Rayleigh flow.Fanno Flow: Aircraft propulsion system; Air conditioning system;
Chemical Process plants
Rayleigh Flow: Regenerator; Intercooler; Combustion Chamber pipes;
Exhaust gas pipes
-
7/30/2019 Model Exam Complete Answers Gd Jp
5/31
4.Differentiate between Fanno flow and Rayleigh
flow.S.No. Fanno Flow Rayleigh Flow1 Friction is present No Friction
2 No Heat transfer Heat transfer is present
-
7/30/2019 Model Exam Complete Answers Gd Jp
6/31
5.Show a normal shock in h-s diagram with the help
of Rayleigh line and Fanno line.
-
7/30/2019 Model Exam Complete Answers Gd Jp
7/31
6.Write the Rankine Hugoniot equation.
-
7/30/2019 Model Exam Complete Answers Gd Jp
8/31
7.List the different types of Jet engines.Turbo jet; Ram jet; Pulse jet engines.
-
7/30/2019 Model Exam Complete Answers Gd Jp
9/31
8.Define the principle of Ram jet engine.
When aircraft flies at very high velocity, incoming air is compressed to
very high pressure without external work. Kinetic energy is converted to
pressure energy by induction of shock in supersonic diffuser. This
principle is called Ram Effect.
-
7/30/2019 Model Exam Complete Answers Gd Jp
10/31
9.What are the types of propellant feed systems?Gas Pressure Feed System; and
Pump Feed system
Gas Pressure Feed System: An inert gas is separately carried at a pressure
greater than the injection pressure. It exerts the required pressure on the
propellant tank. Inert gas pressure feed the fuel and oxidizer into the
combustion chamber. Nitrogen, Helium, air are used for pressurization.
Pump feed System: Both fuel and oxidizer pumps are used to feed into
the combustion chamber and these are driven by a single turbine.
FuelGas
Oxidiser
to injector to injector
O
FHP inert gas
Shut off valve PRV
-
7/30/2019 Model Exam Complete Answers Gd Jp
11/31
10.What are the classifications of a Rocket?1.Based on energy source: Chemical, Electrical, Nuclear, Solar rockets;
2.Based on application: Spy; Missile; Space Craft; Military; Weather rockets;
3.Based on propellant used: Liquid, Solid, hybrid propellant rocket;
4. Based on number of stages: Single stage, Multiple stage rockets;
5.Based on size and range: Short range, Long range and Medium range rockets.
-
7/30/2019 Model Exam Complete Answers Gd Jp
12/31
11.a. i. Derive the expression for velocity of sound in air.
-
7/30/2019 Model Exam Complete Answers Gd Jp
13/31
11.a. ii. A jet fighter is flying at M=2.5. It is observed directly overheard at
a height of 10 km. How much distance it would cover before the sonic
boom is heard on the ground.
-
7/30/2019 Model Exam Complete Answers Gd Jp
14/31
11.b.i.Derive the expression for compressibity in terms of mach number
variation.
11.b. ii. Determine the mach number of an aircraft at which the velocity temperatureof the air at the entry of engine equals static temperature.
-
7/30/2019 Model Exam Complete Answers Gd Jp
15/31
12.a.i. Show that the maximum entropy point occurs at M = 1 in Rayleigh line.
-
7/30/2019 Model Exam Complete Answers Gd Jp
16/31
12.a.ii. Air enters a constant area duct at M1
=3, P1
= 1 atm, and T1
= 310 K.
Inside the duct heat added per unit mass is 3x10 5 J/kg. Calculate the flow
properties static pressure, temperature, density, stagnation pressure and
temperature, and mach number at the exit.
-
7/30/2019 Model Exam Complete Answers Gd Jp
17/31
12.b.i. Show that the maximum enthalpy point occurs at M = 1 / .
-
7/30/2019 Model Exam Complete Answers Gd Jp
18/31
12.b.ii. A long pipe of 0.3 m diameter has a mean coefficient of 0.002. Air enters the
pipe at a mach number of 3, stagnation temperature 310 K and static pressure 0.507
bar. Determine for a section at which the mach number reaches 1.5: (a) Static pressure
and temperature, (b) stagnation pressure and temperature, (c) velocity of air, (d)
distance of the section from the inlet and (e) mass flow rate of air.
-
7/30/2019 Model Exam Complete Answers Gd Jp
19/31
19
-
7/30/2019 Model Exam Complete Answers Gd Jp
20/31
13.a.i. Derive the Rankine Hugoniot ralation.
-
7/30/2019 Model Exam Complete Answers Gd Jp
21/31
13.a.ii. Air at M = 2.5 enters a convergent duct with an area ratio of A 2/A1 = 0.5.Normal shock
occurs at a test section X where AX/A1 = 0.6. Find the exit mach number and pressure ratio
across the duct.
-
7/30/2019 Model Exam Complete Answers Gd Jp
22/31
13.b.i. Derive the Prandtl Meyer relation.
Substituting (2) and (3) in (1) and solving,
-
7/30/2019 Model Exam Complete Answers Gd Jp
23/31
13.b. ii. A gas ( = 1.3) at 345 mbar pressure, 350 K temperature and mach number 1.5 is to be
isentropically expanded to 138 mbar. Determine the deflection angle, final mach number and
temperature of the gas.
-
7/30/2019 Model Exam Complete Answers Gd Jp
24/31
14.a.i. What are the classifications of an aircraft propulsion engine?ii. Explain with a neat sketch the operation of a turbojet engine.
Classifications of aircraft propulsion engine:Turbo jet; turbo fan; turbp prop; Ram jet; Pulse jet engines.
-
7/30/2019 Model Exam Complete Answers Gd Jp
25/31
Performance of Turbo Jet Components
S.No. Component Process Detail Process reference Efficiency
1 Diffuser Increase pressure
transformation
[ i-1 ]
Adiabatic
[ i-1 ]
Isentropic
2 Compressor Increase pressure
work transfer
[ 1-2 ] [ 1-2 ]
Isentropic
3 Combustor Heat added-
Constant pressure
[ 2-3 ] [ 2-3 ]
Rayleigh
4 Turbine Increase velocity
work transfer
[ 3-4 ] [3-4 ]
Isentropic
5 Nozzle Increase velocity
transformation
[ 4-e ] [ 4-e ]
Isentropic
-
7/30/2019 Model Exam Complete Answers Gd Jp
26/31
14.b. A turbojet propels an aircraft at a speed of 900 kmph while taking 3000 kg of air per
minute. The isentropic enthalpy drop in the nozzle is 200 J/kg and nozzle efficiency is 90%. The
air fuel ratio is 85. The combustion efficiency is 95%; Calorific value of fuel is 42 MJ/kg.
Calculate the thrust, propulsive power, propulsive efficiency, thermal efficiency, specific fuel
consumption.
See next slide for answer
-
7/30/2019 Model Exam Complete Answers Gd Jp
27/31
27
-
7/30/2019 Model Exam Complete Answers Gd Jp
28/31
15.a.i. Compare jet propulsion and rocket propulsion.ii. The effective jet velocity of a rocket is 2700 m/s. the forward flight velocity is 1350 m/s.
Propellant consumption rate is 78.6 kg/s. Calculate the thrust, thrust power and propulsive
efficiency.Jet propulsion Rocket propulsion
Oxygen obtained from ambient
air for combustion
Contains own oxygen supply for for
combustion
Jet consists of cold air and
combustion products. Jet consists of exhaust gases only
Mechanical devices used. No mechanical devices used.
-
7/30/2019 Model Exam Complete Answers Gd Jp
29/31
15.b.i. State the advantages and disadvantages of solid propellant rockets.
Advantages of Solid Propellant Rockets:
Simple in design;
Mass production at short notice is possible;
No feed system;
No moving parts;
Lighter in weight; Less frequent problems.
Disadvantages of Solid Propellant Rockets:
Difficult to control in emergency;
Thrust regulation and combustion regulation are difficult;
Low specific impulse;Nozzle cooling and refuelling not possible;
Nozzle erosion occurs.
-
7/30/2019 Model Exam Complete Answers Gd Jp
30/31
15.b. ii. A rocket nozzle has an exit area to throat area 3:1 with isentropic expansion. What will
be the thrust per unit area of exit and specific impulse. If the combustion chamber
temperature is 2700 o C and pressure is 20 bar. Assume atmospheric pressure is 1 bar; = 1.3,
R = 248 J/kgK.
= 1.3, R = 248 J/kgK
-
7/30/2019 Model Exam Complete Answers Gd Jp
31/31
ALL THE BEST