model name model cycle site - audi
TRANSCRIPT
?
A8 / S8 3A8 / S8 4A8 / S8 5A8 hybrid 6A8 / S8 9A8 TFSI e 11
1994 – 2002 2002 – 2010 2010 – 20172012 – 2017
from 2017from 2019
A8
Model name Model cycle Site
Model Overview
Audi
Qu
ickfi
nd
er
Legal Disclaimer:
This manual has been created exclusively for rescuers who have been specially trained in the area
of providing emergency rescue after automobile accidents and who are therefore qualified to use
the activities described in this manual. Furthermore, this manual shows the maximum possible
equipment specification in the model overview.
Vehicle specifications and special options as well as Audi model availability are constantly subject
to change. Therefore, Audi reserves the right to change the content of this manual at all times.
Please note: The information contained in this manual is not intended for customers or for repair
shops and dealers. Customers may gather detailed information from their vehicle owner’s manual
regarding vehicle function as well as any occupant safety features and system descriptions.
Repair shops and dealers obtain repair information through their normal channels.
(Status: 08/2020)
Hint:The maximum possible equipment specification is always shown In the model overview.
You will find informations about rescue and recovery involving Audi vehicles in the Audi Rescue guide lines.
© Copyright, AUDI AG, Ingolstadt, 2020
•
Status: 08/2020, AUDI AG
•
Legend
Controlmodule
Airbag
Gas generator
Preten- sioner
BatteryRollover protection
Fuel tankGas-pressure damper
Reinforce-ment
A8
+S8
Lim
ou
sin
e
1994 – 2002
A8 / S8Audi
Status: 08/2020, AUDI AG
•
Legend
Controlmodule
Airbag
Gas generator
Preten- sioner
BatteryRollover protection
Fuel tankGas-pressure damper
Reinforce-ment
A8
+S8
Lim
ou
sin
e
2002 – 2010
A8 / S8Audi
Status: 08/2020, AUDI AG
Legend
Controlmodule
Airbag
Gas generator
Preten- sioner
BatteryRollover protection
Fuel tankGas-pressure damper
Reinforce-ment
A8
+S8
Lim
ou
sin
e
2010 – 2017
• A8 / S8Audi
Status: 08/2020, AUDI AG
•
Legend
hyb
rid
A8
2012 – 2017
Airbag
Gas gene-rator
Preten-sioner
Control module
12 V battery
Fuel tank
Rein-force-ment
Rolloverprotec-tion
Gas- pressure damper
High-voltage battery
High- voltage-leads/-components
A8 hybridAudi
High-voltage emergency disconnect
Status: 08/2020, AUDI AG
•
hyb
rid
A8
2012 – 2017
Identifying feature
The Audi A8 hybrid can be identified by means of the „hybrid“ logo and the orange cables in the engine compartment.
Engine compartment
Instrument cluster
Wing
Door sill trim strip
A8 hybridAudi
With the ignition switched on: Press START ENGINE STOP button without depressing brake pedal.
Risk of Injury: By pressing the START ENINGE STOP button with depressing brake pedal, the engine starts!
!
It may not be possible to detect that the car is ready to go by the noises it makes when in operation, as the electric motor is silent. If the large needle in the dial on the left of the instrument cluster (power metre) is not on „OFF“ (for example on the „READY position), you have to expect that the electric motor may run or the internal combustion engine may start automatically.
Switch off the ignition
The electric motor is silent!!
Hints
In the case of accidents with deployed / undeployed airbags • Place Vehicle in Park and set parking brake• Switch off the ignition• Disconnect the negative terminals of the 12 V battery if needed
Indempentedly therefrom the high-voltage system can be deactivated by the Service-Disconnect. For this open the cover in the middle of the cargo floor in the trunk:
In the case of accidents in which the airbags are deployed, the high-voltage systemis deactivated.
!
Step 1: Pull lever Step 2: Turn lever up and pull out plug
Status: 08/2020, AUDI AG
•
hyb
rid
A8
2012 – 2017
Disconnect the negative terminals of the 12 V batteries
Identification of the high-voltage components
Lever up the luggage compartment floor. Lift up the tool box element. Disconnect the ground cables from both 12 V batteries (picture on right).
Identification of the Identification of the remaining high-voltage battery high-voltage components
Identification of the The high-voltage battery is located under the luggage compartment floor.
It is a Lithium-ion battery.
All the high-voltage leads and the high-voltage connections are provided with orange insulation. These items must not be disconnected or damaged.
1
2
A8 hybridAudi
Status: 08/2020, AUDI AG
A8
from 2017
•
48 V Lithium-ion Battery (optional)
12 V lead acid battery
WARNING 48 V: Electric arc possible! Turn off ignition before separating the 48 V battery!
!
Legend
Airbag
Gas gene-rator
Preten- sioner
Control module
12 V or 48 V battery
Fuel tank
Rein-force-ment
Overoll protec-tion
Gas- pressure damper
Pedestrian protection system
A8Audi
Status: 08/2020, AUDI AG
•
Bild Front Bild Heck
Audi Modell
A8
from 2017
•
12 V lead acid battery
• remove the battery cover• separate the minus pole of the 12 V battery
48V Lithium-ion battery
The 48 V on-board Lithium-ion battery is automatically deactivated during accidents in which the airbag(s) deployed.
For all other cases, in order to deactivate the on-board power supply the 48 V Lithium-ion battery has to be separately disconnected in addition to the 12 V lead acid battery. Therefore:
Turn off ignition before separating the 48 V battery!
For minimization the risc of electric arc it is recommended to disconnect the batteries as follows:
1. remove the cargo floor from the trunk2. remove the spare tire and vehicle tool kit3. strip the lining of the spare wheel recess as shown below
4. remove the plastic cover from the 48 V battery by removing the three plastic bolts with ascrewdriver
5. pull out the communication connector plug6. remove the right sided pole cap and separate the minus pole of the 48 V Lithium-ion battery.
A8 / S8Audi
!
!
! WARNING! Hazard due to electric arc at 48 V
•
Status: 08/2020, AUDI AG
TFS
I eA
8
from 2019
A8 TFSI eAudi
Legende
Status: 08/2020, AUDI AG
•
from 2019
TFS
I e
A8
Press START-ENGINE-STOP button without depressing brake pedal
Switch off ignition
Vehicle immobilization
Characteristic features
The A8 TFSI e may be identified by the display of of the instrument cluster (power metre), the charging socket and the “e” in the model lettering. The model lettering at the rear can optionally be deselected.
1. Push “P“-Button on gear lever2. Apply parking brake
Warning: When pressing the START-ENGINE-STOP button and depressing the brake pedal at the same time, the engine will start!
!
1. 2.
The electric motor is silent.The display on the left of the instrumentcluster (power metre) indicates if the drive system is switched off („OFF“) or ready to drive („READY“).
„OFF“ „READY“
A8 TFSI eAudi
Status: 08/2020, AUDI AG
•
from 2019
TFS
I e
A8
!
2. 3.
1.
A8 TFSI eAudi
Deactivation of High Voltage System
Alternative 2 - Emergency disconnect fuse in trunk
1. Remove cover at the left side in the trunk2. Identify emergency fuse disconnection tab and pull out the tab
For all other cases, deactivate the High Voltage System as follows
Alternative 1 – Emergency disconnect in the vehicle front end, open the front bonnet
1. Locate the emergency disconnect → on the left side next to the strut tower2. Pull out red flap from emergency disconnect3. Pull out black plug while pressing the red tab
The High Voltage System is automatically deactivated during accidents in which the airbag(s) deployed.
•
from 2019
TFS
I e
A8
A8 TFSI eAudi
Status: 08/2020, AUDI AG
Disconnect 12 V battery
The 12 V battery is located behind the right cover in the trunk.
Disconnect charging cable
Vehicle connected to charging station:
1. Unlock vehicle via remote control2. Push button charging socket and disconnect the charging connector
Releasing the charging connector manually in case of failure:1. Remove cover at the left side in the trunk2. Release the yellow ring from its holder and pull the ring carefully3. Disconnect the charging connector
If needed, refer to additional steps in this rescue sheet
1. 2.
1. 2. 3.
1. Remove the right cover in the trunk2. Seperate the minus pole