model no. operating instructions th-l32xm5k led tv …panasonic.ae/en/manuals/th-l32xm5m.pdf ·...

Operating InstructionsLED TV

EnglishThank you for purchasing this Panasonic product.Please read these instructions before operating your set and retain them for future reference.The images shown in this manual are for illustrative purposes only.

CEF

TQB4GC0959

Model No.TH-L32XM5KTH-L32XM5MTH-L32XM5TTH-L32XM5X

Standard accessoriesRemote Control• N2QAYB000802

R6 (AA) batteries (2)(for Remote Control)

Pedestal

EXITINFO

OPTION

SURROUND STILLOFF TIMER

RETURN

P-NR SOUND PICTURE

INPUT

MUTE LAST VIEW

TV

MENU

AVTVPC

ASPECT

R G Y B

POWER

CHVOL

HDMI

PLAY

BACK

USB

Mains lead

(XM5K/X series) (XM5M series) (XM5T series)Operating Instructions

• Accessories may not be placed all together. Take care not to throw them away unintentionally.

• Th is product contains possibly dangerous parts (such as plastic bags), which can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.

– Safety Precautions .................................................... 2 – Attaching / removing the pedestal ......................... 3 – Connecting the Aerial & External Equipment ..... 4 – Identifying Controls ................................................ 5 – Performing Initial Setup.......................................... 6 – Watching TV ............................................................ 6 – Watching External Inputs ....................................... 7 – Using the Menu Functions ..................................... 7 – Using Media Player ................................................11 – Technical Information ...........................................13 – FAQs ........................................................................15 – Specifi cations ..........................................................16

Contents

TH-L32XM5KMTX_fold_EN.indd 1TH-L32XM5KMTX_fold_EN.indd 1 6/1/2012 8:26:04 AM6/1/2012 8:26:04 AM

Safety PrecautionsWarningHandling the mains plug and lead• Insert the mains plug fully into the socket outlet. (If the mains

plug is loose, it could generate heat and cause fire.)• Ensure that the mains plug is easily accessible.• Do not touch the mains plug with a wet hand. (This may cause

electrical shock.) • Do not use any mains lead other than that provided with this TV.

(This may cause fire or electrical shock.)• Do not damage the mains lead. (A damaged lead may cause fire

or electrical shock.)• Do not move the TV with the lead plugged in the socket outlet.• Do not place a heavy object on the lead or place the lead near a

high-temperature object.• Do not twist the lead, bend it excessively, or stretch it.• Do not pull on the lead. Hold onto the mains plug body when

disconnecting the lead.• Do not use a damaged mains plug or socket outlet.

If you find any abnormality,

remove the mains plug immediately!

Power source• This TV is designed to operate on:

– AC Auto 110 - 240 V, 50 / 60 Hz – Table top use

• Mains plug types vary between countries.

Do not remove covers and NEVER modify the TV yourself• Do not remove the rear cover as live parts are accessible when it is removed. There are

no user serviceable parts inside. (High-voltage components may cause serious electrical shock.)

• Have the TV checked, adjusted, or repaired at your local Panasonic dealer.Do not expose to rain or excessive moisture• To prevent damage which might result in electric shock or fire, do not expose this TV to

rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

Do not expose to direct sunlight and other sources of heat• Avoid exposing the TV to direct sunlight and other sources of heat.

To prevent the spread of fire, keep candles or other open flames away from this product at all timesDo not insert foreign objects into the TV• Do not allow any objects to drop into the TV through the air vents. (Fire or electrical

shock may result.)

Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base• The TV may fall off or tip over.Use only the dedicated pedestals / mounting equipment• Using an unapproved pedestal or other fixtures may make the TV unstable, risking

injury. Be sure to ask your local Panasonic dealer to perform setup.• Use approved pedestals / wall-hanging brackets (p. 3).

CautionThis appliance is intended for use in tropical climatesWhen cleaning the TV, remove the mains plug• Cleaning an energised TV may cause electrical shock.Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time• This TV will still consume some power even in the Off mode, as long as the mains plug

is still connected.Do not apply strong force or impact to the display panel• This may cause damage resulting in injury.Do not block the rear air vents• Adequate ventilation is essential to prevent failure of electronic components.• Ventilation should not be impeded by covering the ventilation openings with items such

as newspapers, table cloths and curtains. • We recommend that a gap of at least 10 cm is left all

around this TV even when placed inside a cabinet or between shelves.

• When using the pedestal, keep the space between the bottom of the TV and the surface where the TV is set.

• If pedestal is not used, ensure the vents in the bottom of the TV are not blocked.

Minimum distance (cm)10

10 10 10

NOTESAuto power standby function• Th e TV will automatically go to Standby mode in the following conditions:

– no signal is received and no operation is performed for 30 minutes in TV mode – [Off Timer] is active in the Setup Menu (p. 9). – no operation is performed for the period selected in [Auto Standby] (p. 9)

Keep the TV away from these types of equipment• Electronic equipment

In particular, do not place video equipment near the TV. Electromagnetic interference may distort images / sound.

• Equipment with an infrared sensorTh is TV also emits infrared rays. Th is may aff ect operation of other equipment.

Transport only in upright position

2


Attaching / removing the pedestalWarningDo not disassemble or modify the pedestal.• Otherwise the TV may fall over and

become damaged, and personal injury may result.

CautionDo not use any pedestal other than that provided with this TV.• Otherwise the TV may fall over and

become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.• If you use the pedestal while it is physically

damaged, personal injury may result. Contact your local Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.• If insufficient care is taken to ensure screws

are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Ensure that the TV does not fall over.• If the TV is knocked or children climb

onto the pedestal with the TV installed, the TV may fall over and personal injury may result.

Two or more people are required to install and remove the TV.• If two or more people are not present, the

TV may be dropped, and personal injury may result.

When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified procedure. (p. 3)• Otherwise the TV and / or pedestal may fall

over and become damaged, and personal injury may result.

Assembly screw (4) (black)

Assembly screw (4) (black)

Bracket• TBL5ZA33121

Base• TBL5ZX04881

1 Assembling the pedestalC

D

A

Front

Use the assembly screws to fasten the bracket to the base securely.• Make sure that the screws are securely

tightened.• Forcing the assembly screws the wrong way

will strip the threads.

2 Securing the TV

B

Arrow mark

Hole for pedestal installation

Use the assembly screws to fasten securely.• Tighten the four assembly

screws loosely at first, then tighten them firmly to fix securely.

• Carry out the work on a horizontal and level surface.

Removing the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.1 Remove the assembly screws from the TV.2 Pull out the pedestal from the TV.3 Remove the assembly screw from the bracket.

Preventing the TV from falling overUsing the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation surface.• Th e place where the pedestal is to be fi xed

should be thick enough and made of hard material.

Screwhole

Screw (not supplied)Diameter: 3 mmLength: 25 - 30 mm

3

Rear of the TV

Holes for wall-hanging bracket installation

100 mm

200 mm

Depth of screw: m inimum 11 mm m aximum 17 mmScrew Thread Type: M4

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

[View from the side]

Wall-hanging bracket (Optional) Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please read the manual of the optional accessories.

WARNING• Failure to use a Panasonic bracket or choosing to mount

the unit yourself will be done at the risk of the consumer. Always be sure to ask a qualified technician to carry out set up. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. Any damage resulting from not having a professional installer mount your unit will void your warranty.

• When any optional accessories or wall hanging brackets are used, always ensure that the instructions provided are followed fully.

• Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts.

• Take care when fixing wall brackets to the wall. Wall mounted equipment shall not be grounded by metal within the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.

• To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.

TY-WK3L2RW

• Th e angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and “5 or 10-degree tilting” for this TV.


Th ese diagrams show our recommendations for how to connect the TV to your various equipment. For other connections, please refer to the operating instructions of each equipment. External equipment and cables shown are not supplied with this TV.Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

HDMI

AV IN

PC AUDIO via AV1 AUDIO OUT

AV1IN

AUDIO

AUDIOR

R L Y/VIDEOPR/CR PB/CB

L

COMPONENT

USB

VIDEO

AUDIO

R

L

AV 2IN

Rear of TV Side of TV

NOTES• Keep some space between the TV and RF cable

to prevent distorted image.• Do not put the RF cable close to the mains lead

to avoid noise.• Do not place the RF cable under the TV.• To obtain optimum picture and sound quality,

an aerial, the correct cable (75 Ω coaxial) and the correct terminating plug are required.

• If a communal aerial system is used, you may need the correct connection cable and plug between the wall aerial socket and the TV.

• Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your area and the accessories required.

• Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.

• For HDMI connections, use a fully wired HDMI compliant cable.

• Read the manual of the equipment, too.

To listen with Home Theater

To watch DVD

AUDIO OUTAUDIOR L

Amplifier with speaker system

RCA cable

AV1IN

AUDIOR L Y/VIDEOPR/CR PB/CB

COMPONENT

(viewing)

(listening)

DVD player

PCPC AUDIO via AV1AV1

IN

AUDIOR L

conversion adaptor (if necessary)(viewing)

(listening)

USB device / Camcorder / Game equipment

USB

VIDEO

AUDIO

R

L

AV 2IN

USB device

Camcorder, etc.

(listening)(viewing)

AV IN

HDMI

RF cable

AerialSatellite dish

Satellite cable Set top box

HDMI cable

To connect the aerial / Set top box

To playback

HDMI equipment

AV1IN

AUDIOR L Y/VIDEOPR/CR PB/CB

COMPONENT

AV IN

HDMI

Aerial

HDMI cable*1

or

RF cable

DVD Recorder / VCR

AV IN

HDMI

Recorder / PlayerHDMI cable

*1 Only for DVD recorder

If the antenna is placed in the wrong location, interference might happen.

Connecting the Aerial & External Equipment

4


Identifying ControlsTV

USB

VIDEO

AUDIO

R

L

AV 2IN

8

9

1 2 3

4

5

7

6

1 Remote control signal receiver• Do not obstruct the receiver with any

object.2 C.A.T.S. (Contrast Automatic Tracking

System) sensor3 Power LED

• Red: Standby / Green: On4 Function select

• [Volume]/[Backlight]/[Contrast]/[Brightness]/[Colour]/Sharpness]/[Tint] (NTSC signal)/[Bass]/[Treble]/[Balance]/[Auto Tuning] Available when [Mode] in the Sound

Menu is set to [Music] or [Speech] (p. 8)

5 Selects channel up/down, adjusts settings (when using the F button), switches the TV On (press either button for about 1 second when in Standby mode)

6 Changes the input mode7 On / Standby switch

• Switches the TV On / Standby.• To completely Off the TV, please switch

Off the wall socket or remove the mains plug from the wall socket.

8 USB port9 AV2 terminal

Remote Control

EXITINFO

OPTION

SURROUND STILLOFF TIMER

RETURN

P-NR SOUND PICTURE

INPUT

MUTE LAST VIEW

TV

MENU

AVTVPC

ASPECT

R G Y B

POWER

CHVOL

HDMI

PLAY

BACK

USB

1 14

151617

18

19

2021

2223

24

25

2345

67

8

910

11

12

13

1 On / Standby switch• Switches the TV On /

Standby.2 Aspect (p. 6)

• Changes aspect ratio3 Picture Noise Reduction

(p. 8)• Switches picture noise

reduction setting4 Information (p. 6)

• Displays channel and programme information

5 [Main Menu] (p. 7)• Press to access Picture,

Sound and Setup Menus6 USB PLAYBACK

(p. 11)• Switches to USB device

viewing / listening mode7 OK

• Confirms selections and choices

• Press after selecting channel positions to quickly change programme

8 [Option Menu] (p. 6)• Quick access to optional

settings for picture, sound, etc.

9 Surround (p. 8)• Switches surround

sound setting10 Sound Selection

• Selects sound output mode during multiplex broadcast

11 Numeric buttons• Changes channel• When in Standby mode,

switches TV On12 Sound Mute

• Switches sound mute On or Off

13 Volume Up / Down

14 Input mode selection (p. 7)

• PC - switches to PC input mode

• TV - switches to TV mode

• AV - switches to AV input mode from Input Selection list

15 Picture Mode Selection• Selects picture mode

(p. 8)16 Sound Mode Selection

• Selects sound mode (p. 8)

17 Exit• Returns to the normal

viewing screen18 HDMI

• Switches to HDMI input mode

19 Cursor buttons• Makes selections and

adjustments20 Return

• Returns to the previous menu / page

21 Coloured buttons• Used for selection,

navigation and operation of various functions

22 Still• Freeze / unfreeze picture

(p. 6)23 Off Timer (p. 6)

• Set the time the TV automatically goes to Standby mode

24 Last View (p. 6)• Switches to previously

viewed channel25 Channel Up / Down

• Selects channel in sequence

Inserting and removing remote’s batteries1

Hook

Open Caution• Incorrect installation may cause battery leakage and corrosion,

resulting in damage to the remote control.• Do not mix old and new batteries.• Replace only with same or equivalent type. Do not mix different

battery types (such as alkaline and manganese batteries).• Do not use rechargeable (Ni-Cd) batteries.• Do not burn or break up batteries.• Do not expose batteries to excessive heat such as sunshine, fire

or the like. • Make sure you dispose of batteries correctly. • Ensure batteries are replaced correctly, there is danger of

explosion and fire if battery is reversed.• Do not disassemble or modify the remote control.

2

Note the correct polarity (+ or -)

Close

5


Performing Initial Setup Watching TVThese steps are not necessary if the setup has been completed by your local dealer.

1 Connect the mains lead, plug into a wall outlet and switch on the TV

Insert the mains plug (supplied) fi rmly into place.

• When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.

• After switching on the mains power, you can also use the remote control to turn on the TV.

2 Select your language

EnglishOSD Language

OK

Store

Select

3 Select your areaChannel Plan

Asia/W.EuropeCIS/E.Europe

ChinaHong Kong

NZ/IndonesiaCATV/Other 1

OK

Start Auto Tuning

Select

1 When selecting [CATV/Other], press OK, and then select the Channel Plan from [Indian CATV], [South Africa], [American System], [American CATV] or [Japan].

4 Start Auto TuningAuto Tuning1 CH2Scan 0% 100%

• Auto Tuning searches and stores TV channels. The sorted channel order depends on the TV signal, the broadcasting system and reception conditions.

5 Select [Home]Please select your viewing environment.

Home Shop

Viewing Environment Mode

OK

Confirm Select

Auto Tuning is completed.

Viewing Environment Mode[Home] : Recommended mode for home

viewing at optimal picture / power consumption. [Viewing Mode] is [Normal] (p. 8).

[Shop] : Features demonstration mode for in-store display). [Viewing Mode] is [Dynamic] (p. 8).

To return to viewing environment selection mode if you have selected [Shop]Shop

You have selected shop mode RETURN

Please select your viewing environment.Home Shop

• To change the viewing environment mode later, reset all settings by accessing [Shipping Condition] (p. 9).

1 Turn on the TV POWER

2 Select TV mode TV

3 Select a channel Identifying Controls (p. 5)

While watching the TV, you can do the following:Freeze / unfreeze the pictureSTILL

Set the Off TimerThe TV automatically goes into Standby after the selected period.OFF TIMER

Press repeatedly until the desired time appears.[0/15/30/45/60/75/90](minutes)

• Also possible to set the time from[Off timer] in the Setup Menu (p. 9).

• To cancel, set to [0] or turn off the TV.• To display the remaining time

Information banner (below)• When the remaining time is within 3

minutes, the remaining time will flash on screen.

Display options for the current programmeOPTION

OK Adjust Select

[Channel Colour Set]Sets colour density

[Picture Menu] (p. 8)[MPX]Selects multiplex sound (if available)

[Sound Menu] (p. 8)[Volume Correction]Adjusts the volume of an individual channel or input mode

[Sound Menu] (p. 8)

Return to the last viewed channel

LAST VIEW

• Press again to return to the present view.

Change aspect ratioASPECT Do one of the following:

• Press repeatedly until you reach the desired mode[16:9/14:9/Just/4:3/4:3 Full/Zoom1/Zoom2/Zoom3]

• Select from [Aspect Selection] listAspect Selection16:914:9

4:3 Full

Just

Zoom1

4:3

Zoom2Zoom3

OK

Change

Select

–Only [16:9] and [4:3] are available in PC input mode. –Aspect is fixed to [16:9] when [Viewing Mode] is set to [GAME]. –Aspect mode can be memorised separately for each SD (Standard definition) and HD (High definition) signals. –HDMI mode: HD signals: 16:9, 14:9, 4:3, 4:3 Full,

Zoom1, Zoom2, Zoom3SD signals: 16:9, 14:9, Just, 4:3, Zoom1,

Zoom2, Zoom3 Display Information bannerINFO • Also appears when changing

channelTV

1

CH7

5.5MHz

PAL

16:9

15

Sound mute On/ Audio mode/Off Timer remaining time

Input mode/Channel position/Channel number/Sound system/Colour system (not displayed if set to [Auto])/Aspect ratio

6


Watching External Inputs Using the Menu FunctionsConnect the external equipment to enjoy input from the equipment.To connect the equipment (p. 4)1 Display the Input Selection menu

AV

2 Select the input mode of the connected equipmentExample (AV2)Input SelectionTV AV1

HDMI

AV2

USB

PC

OK

Change

Select

• You can also select the input by pressing the AV button on the remote control or the TV repeatedly until the desired input is selected.

• You can also select the PC input mode directly by pressing the PC button.

3 ViewAV2576i input16:9

Displays the selected mode

• You can label or skip each input mode [Input Labels] (p. 10)

Skipped inputs will not be displayed when the AV button is pressed.

• If the external equipment has an aspect adjustment function, set to [16:9].

• For PC input mode: – You can listen to the PC sound by connecting an audio cable. – You can adjust some settings using [PC Setup] in the Setup Menu (p. 9). – For HDMI-compatible PC, it is possible to connect to an HDMI terminal using an HDMI cable.

To return to TV TV

Navigating the Menu

1 Display the menuMENU • Displays the functions that can be set (varies

according to the input signal)

2 Select the menuMain Menu

PictureSoundSetup

OK

Access

Select

3 Select the item

OK

Select

4 Adjust or select

OK

Store / Access / Reset(required by some functions)

Change / Adjust

• Choose from among alternativesNumber and positions of alternatives

Changed

Colour Balance Normal

• Adjust using the slide bar

MovedSharpness 50

• Go to the next screen

Displays the next screen

Child Lock Access

• To reset the settings – To reset the picture settings only

[Reset to Defaults] in the Picture Menu (p. 8) – To reset the sound settings only

[Reset to Defaults] in the Sound Menu (p. 8) – To initialise all settings

[Shipping Condition] in the Setup Menu (p. 9)

About the Operation GuideAn Operation Guide is displayed at the bottom of the On-screen Display to help you navigate the menu.

Operation Guide

SelectEXITChangeRETURN

Page up

Page down

Sound Menu 1/2Mode MusicBassTrebleBalance 0

00

Surround

Volume CorrectionSpeaker Distance to Wall Over 30cmMPX

0

OffAuto Gain Control Off

Stereo

OK

RETURN

TV

EXIT

CH

Example: [Sound Menu]

Notes• A different menu will be displayed in the mode of Media

Player operations.• Only available items can be selected.

To return to TV at any timeEXIT

To return to the previous screenRETURN

To change menu pages

CH

up

down

7


List of Menu ItemsPicture Menu- Settings for picture

• You can customise the settings of [Backlight], [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Eco Mode], [P-NR] and [3D-COMB] for each [Viewing Mode] and input to suit your viewing preference.

• Set for each input signal.Viewing Mode Basic picture mode[Dynamic / Normal / Cinema / True Cinema / GAME][Dynamic]: Enhanced picture contrast and sharpness.[Normal]: Suitable for normal ambient lighting conditions.[Cinema]: Improved performance of contrast, black and colour reproduction.[True Cinema]: Precisely reproduces the original quality of the image without any adjustment.[GAME]: Fast response signal, specifically to provide suitable images for playing games.• [GAME] is not valid in TV mode.• A record of accumulated time spent in [GAME] can be

displayed on the screen [Playing Time Display] (p. 9)Backlight Contrast Brightness Colour Sharpness Increases or decreases the levels of these options

according to your personal preferenceTint Adjusts the picture hue.• For NTSC signal, Component or HDMI inputColour Balance Sets the overall colour tone of the picture [Cool / Normal / Warm]• Not valid when [Viewing Mode] is set to [True Cinema]. Channel Colour Set Colour density variation among broadcast channels can be adjusted to three levels for each reception channel.• Select the channel you want to adjust and set. Eco Mode When turned on, C.A.T.S. sensor (p. 5) senses the surrounding light level to adjust the screen brightness appropriately to reduce the power consumption [Off / On]• Not available in Shop mode (Dynamic picture mode) PNR (Picture Noise Reduction) Automatically reduces unwanted picture and flicker noise in the contoured parts of a picture [Off / Min / Mid / Max]• Not valid on PC signal.

3D-COMB Makes still or slow moving pictures look more vivid [Off / On]• Occasionally, while viewing still or slow moving pictures,

colour patterning may be seen. Set to [On] to display sharper and more accurate colours.

• For PAL or NTSC signal reception only.• Not valid on Component, PC, HDMI and Media Player. Advanced PC Settings Available in PC input mode only.[R-Gain / G-Gain / B-Gain]: Adjusts the white balance of each gain.[Gamma]: Switches the gamma curve [2.0 / 2.2 / 2.5]These values are only reference for adjustment.[Reset to Defaults]: Press OK to reset to the default R-Gain, G-Gain, B-Gain and Gamma.Reset to Defaults Press OK to reset the present picture [Viewing Mode] of the selected input to the default settings.

Sound Menu - Settings for soundMode Basic sound mode [Music / Speech / User]• The selected mode affects all input signals.[Music]: Improves sound quality for watching music videos, etc.[Speech]: Improves sound quality for watching news, drama, etc.• In [Music] and [Speech] modes, you can adjust and store

[Bass] and [Treble] settings for each mode individually.[User]: Adjusts sound using the [Equaliser].• For the [User] mode, [Equaliser] will appear on the Sound

Menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency [Equaliser] (below).

Bass Increases or decreases the level to enhance or minimise lower, deeper sound output.Treble Increases or decreases the level to enhance or minimise sharper, higher sound output.

Equaliser Select the frequency band with the left / right cursor button and change the frequency level with the up / down cursor button.• This function is available when [Mode] is set to [User].• If you want to enhance the bass sound, raise the level of the

lower frequency. If you want to enhance the treble sound, raise the level of the higher frequency.

• To reset the levels of each frequency to the default settings, select [Reset to Defaults] using the left / right cursor button, and then press OK.

Balance Adjusts the volume level of the right and left speakers. Surround Surround sound settings [Off / On]• Switching is also possible by pressing Surround (p. 5).Auto Gain Control Adjusts the current volume level if it is extremely different from the previous viewed channel or input mode [Off / On] Volume Correction Adjusts the volume of individual channel or input modeSpeaker Distance to Wall Adjusts the low frequency sound [Over 30cm / Up to 30cm]• If the space between the back of TV and wall is over 30 cm,

[Over 30cm] is recommended.• If the space between the back of TV and wall is within

30 cm, [Up to 30cm] is recommended.MPX Select multiplex sound mode (if available) [Stereo / Mono / M1 / M2][Stereo]: Use this normally.[Mono]: When stereo signal cannot be received.[M1] / [M2]: Available while mono signal is transmitted. HDMI Input Select to fit the input signal[Digital / Analogue][Digital]: HDMI cable connection[Analogue]: HDMI-DVI adaptor cable connection• HDMI input mode only.Reset to Defaults Press OK to reset the present settings of [Mode], [Balance] and [Surround] to the default.

8


Setup Menu- Settings for TV PC Setup[Input Resolution] Switches to a wide view• VGA (640 × 480 pixels), WVGA (852 × 480 pixels),

XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)• Options change depending on signals.[Clock] Set to the minimum level if noise occurs.[H-pos] Adjust horizontal position.

OK

[V-pos] Adjust vertical position.

OK

[Clock Phase] Eliminates flicker and distortion.• Adjust after [Clock] adjustment.• Set to the minimum level if noise occurs.[Sync] PC sync signal type [H & V / On Green]

– [H & V]: By the horizontal and vertical signals from your PC. – [On Green]: Sync on Green sync from your PC.

[Reset to Defaults] Press OK to reset the [PC Setup] settings to the default.Off Timer Set the time the TV automatically goes to Standby mode[Off / 15 / 30 / 45 / 60 / 75 / 90 minutes]Child Lock Locks a channel / AV input to prevent access to it (p. 10).Tuning Menu[Channel List Edit] Skip the unwanted channels or edit channels (p. 10).[Auto Tuning] Set TV channels automatically (p. 10)[Manual Tuning] Set TV channels manually (p. 10)OSD Language Changes language for on-screen displays[English / / / / / Indonesia / / / ]Display Settings[Input Labels] Label or skip each input terminal (p. 10)[Banner Display Timeout] Set how long the information banner stays on screen[0 (No display)] / [1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds] (p. 6)[ Playing Time Display] [Off / On]• Set to [On] to display a record of accumulated time spent using [GAME] mode every

30 minutes• This function is available when [GAME] is selected in [Viewing Mode].

System Menu[ Shipping Condition] Resets all settings to the original condition. • Press OK to confirm, then follow the on-screen instructions.• Initial setup will automatically start when the TV is next turned on (p. 6).[Software Licence] Displays the software licence information.[ System Information] Displays the system information of this TV.Other Settings[ AV Colour System] Selects optimum colour system based on video signals in AV mode [Auto / PAL / SECAM / M.NTSC / NTSC][Colour Matrix] Adjusts suitable colour parameters for [SD] (standard definition) or [HD] (high definition)

– [SD]: Input signal is a normal TV system – [HD]: Input signal is a high definition system

• Available only with 480p or 576p input on video signals in a natural colour from digital equipment connected to Component or HDMI terminal.

[ Auto Standby] Set the time the TV automatically goes to Standby mode when no operation is performed in the selected period [Off] / [2 / 4 hours]• Automatic input switching with the connected equipment affects this function and time-

count will be reset.• The notification message will flash 3 minutes before going to Standby mode.[Power Save] Reduces brightness of the picture to economise on power consumption [Off / On][16:9 Overscan]

– [Off]: Displays image in its original size including edge video noise such as lines, dashes, dots, etc. – [On]: Default - Image is overscanned by ~5% beyond the edge of the screen to hide edge video noise

• Applicable for video signals when the TV aspect is set to [16:9].• Memorised separately for SD and HD channels/signals.

9


You can perform tuning or skip unwanted channels.1 Select TV mode TV

2 Main Menu Setup Tuning Menu3 Select a function

Tuning MenuChannel List EditAuto TuningManual Tuning Access

AccessAccess

[Channel List Edit] - Hides channelsThe hidden channels cannot be displayed except in this function.Select a channel and reveal / hideChannel List Editor

OK

[Reveal]/[Hide]

Select: [reveal]: [hide] (skip)

• To reveal all channels Y

• To retune each channel (Manual Tuning) R

[Auto Tuning] - Set all TV channels automaticallyAuto Tuning

All tuning data will be erased

Start Auto Tuning EXIT

RETURN

Start Settings are made automatically

OK StartAuto Tuning

Auto Tuning1 CH2Scan

EXIT

0% 100%

• All the previous tuning settings are erased.• When the operation is completed, the channel at channel position [1] will be displayed.• Search begins in the order from the lower channels to the higher channels.• If tuning has not been done completely [Manual Tuning] (see below)

[Manual Tuning] - Sets TV channel manually0Fine TuningManual TuningSound SystemColour System

CH57

AutoB/G

Manual Tuning

0% 100%

[Fine Tuning]: Refines the tuning of an individual channel[Manual Tuning]: Set channel manually after Auto Tuning.

– Set Sound System and Colour System, and then perform this function. Set Colour System [Auto] normally. – If a VCR is connected only with the RF cable, select channel position [0].

Select a channel position Select a channel Search & store

CH OK

Store Search

You can lock channels / AV input terminals. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. Main Menu Setup Child Lock

Enter the PIN number (4 digits) • To cancel Select the locked channel / input

OK

• To lock all G

• To cancel all locks Y

• To change the PIN number Select [Change PIN] in [Child Lock] and enter a new PIN number twice.

Notes• Make a note of the PIN number in case

you forget it.• Performing [Shipping Condition] erases

the PIN number and all settings.

* * * *

Child Lock-PIN Entry Please enter new PIN PIN

(Enter the PIN number twice at first setting)

Select [Child Lock List] Child Lock

Change PIN Child Lock List Access

Select the channel / input to be locked

12 Lock3 Lock4 Lock5 Lock6 Lock7 Lock8 Lock

Name InputTV TV

TV TV

TV TV

TV TV

TV TV

TV TVTV TVTV TV

Type Child Lock List - TV and AV

Lock

OK

Lock

Select : Appears when the channel / input is locked

You can label the input mode or skip any unused terminal.To select the input mode (p. 7)1 Main Menu Setup Display Settings Input Labels2 Select an input terminal and set

Input Labels

AV1TV

AV2PCHDMI

DVDTV

AV2PCHDMI

• The labels you set will be displayed in [Input Selection] menu or banner.

• If [Skip] is selected, you cannot select the mode.

Tuning and Editing Channels

Control channel audience (Child Lock)

Input Labels

Auto Tuning using the buttons on the TV

1 Press repeatedly until [Auto Tuning] appears

• To return to TV2 Access [Auto Tuning]

3 Start [Auto Tuning]

10


Using Media PlayerMedia Player allows you to enjoy photo or music recorded on a USB Flash Memory.Photo mode : Still pictures recorded by digital cameras will be displayed.Music mode : Digital music data will be played back.When these functions are used, the audio signal is output from audio output terminals.• [Date] shows the date on which the recording was made by the digital cameras. The file

without record of the date is shown as [ / / ].• The picture may not appear correctly on this TV depending on the digital cameras used.• Display may take some time when there are many files and folders in the USB Flash

Memory.• Partly degraded files might be displayed at a reduced resolution.• The folder and file names may be different depending on the digital camera used.

Starting Media Player1 Insert the USB Flash Memory

• Insert or remove straightly and completely.

USB

VIDEO

• For more information on supported file formats (p. 14 - 15)

2 Switch to Media Player

3 Select the content Media Player

Photo Music

Contents Select

USB

EXIT Select RETURN

Access

OK

Access Select

[Photo] “Photo mode” (p. 11)[Music] “Music mode” (p. 13)

To return to TV To return to the previous screenEXIT

or RETURN

The thumbnail of all the photos in the USB Flash Memory will be displayed.Example : Thumbnail - [All photos]

OPTION

USBEXITSelect RETURN

Media Player Photo All photos

Slideshow View Select Drive Select Contents Select

InfoViewOption Menu

• To change the background music “Photo Setup” (p. 12)

• To display the information of the highlighted photoINFO 1/48

p1010001.JPG File name

Date

Pixel2010/10/23

1600X1200

File number / Total file number

: Error display device name

To sort by folder Display the viewing mode selection screen

G

Select the sort typeFolder view

OK Access

[Folder view]: Displays the thumbnails grouped by folders• Files that are not placed in a folder will remain displayed as folder views. Select folder view to display the thumbnails of the selected group

OPTION

2010/10/23

2010/11/24

2010/10/25

2010/12/01

2010/11/01

2010/12/03

2010/11/05

2010/12/20

2010/11/10

2010/12/22

2010/11/22 2010/11/23

Media Player Photo

USBEXITSelect RETURN

Slideshow View Select Contents Select

InfoAccessOption MenuDrive Select

OK

Access( Display thumbnails of the selected group)

Select

• To return to the thumbnail of all photosG

OK Access

• To display the information of the highlighted group

• INFO

•

1/12

2010/10/23 Folder name

Number of files 3 Folder name, date or month

Group number /Total group number

Photo mode

11


[Single view] - Photos are displayed one at a time. Select the file from the thumbnail of photos to be viewedExample:

OK

View

Select

Single view

Single view

Stop

EXIT Select RETURN

Rotate

Operation guide

• To display / hide the operation guideINFO

• To return to thumbnail RETURN

• To operate Single view

OK

To the previous photo Slideshow To the next photo Stop (return to thumbnail)

• To rotate 90° B

[Slideshow] - Slideshow will complete when all photos have been viewed within the present thumbnail.

Select the file from the thumbnail of photos for the first view

• To display / hide the operation guideINFO

OK • To pause (return to Single view)

OK Start SlideshowR

• To return to thumbnailRETURN

Photo Setup - Setup the settings for Photo Mode Display the option menu Select [Slideshow Settings]

OPTION Option Menu Slideshow Settings OK

Select the items and set Slideshow Settings Transition Effect Screen Mode Interval Repeat

Normal 5 seconds On Off

None

Back Ground Music

OK

Select Change

Item Adjustments / Configurations (alternatives)

Transition Effect

Selects the transition effect for photo switching during slideshow[None] / [Dissolve] / [Wipe Right] / [Wipe Left] / [Wipe Up] / [Wipe Down] / [Box In]/[Box Out] / [Random][Dissolve]: The photo is replaced by an indefinite block unit[Wipe Right]: The next photo slides over the preceding clip from left to right.[Wipe Left]: The next photo slides over the preceding clip from right to left.[Wipe Up]: The next photo slides over the preceding clip from bottom to top.[Wipe Bottom]: The next photo slides over the preceding clip from top to bottom.[Box In]: A box shape expands from each of the four corners toward the center.[Box Out]: A box shape expands from the center of each quadrant toward the corners of each quadrant.[Random]: Each transition mode is performed randomly.

Screen Mode

Selects enlarged or normal viewing mode on Single view and Slideshow[Normal] / [Zoom]• Depending on the photo size, the photo may not be enlarged.

Interval Selects slideshow interval [5 / 10 / 15 / 30 / 60 / 90 / 120 seconds] Repeat Slideshow repeat [Off] / [On] Back Ground Music

Selects the background music during Photo mode[Off] / [Type1] / [Type2] / [Type3]• [Type1], [Type2] and [Type3] are the fixed music each installed in this TV.

• Picture quality may become lower depending on the slideshow settings.• Picture setting may not work depending on the slideshow settings.

Change the contents You can switch to the other mode of Media Player from the thumbnail view.

While the thumbnail is displayed, display the contents selection

Select the contents

OPTION

USB EXIT Select RETURN

Media Player Photo All photos

Slideshow View Select Contents Select Info

View Photo Music

Contents Select

USB

EXIT Select RETURN

Access

B

OK

Access Select

[Photo] “Photo mode” (p. 11)[Music] “Music mode” (p. 13)

12


HDMI connection

HDMI (High-Defi nition Multimedia Interface) is the world’s fi rst complete digital consumer AV interface complying with a non-compression standard.HDMI allows you to enjoy high-defi nition digital images and high-quality sound by connecting the TV and the equipment.HDMI-compatible equipment1 with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.About connections (p. 4).

Applicable HDMI features• Input audio signal : 2ch Linear PCM

(sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)• Input video signal : 480i, 480p, 576i, 576p, 720p, 1080i and 1080p

“Input signal that can be displayed” (p. 14)Match the output setting of the digital equipment.

• Input PC signal : “Input signal that can be displayed” (p. 14)Match the output setting of the PC.

DVI connectionIf the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable2. When the DVI to HDMI adaptor cable is used, connect the audio cable to the audio input terminal (AV1 audio terminals).

NOTES• Audio settings can be made on the [HDMI Input] in the Sound Menu. (p. 8)• If the connected equipment has an aspect adjustment function, set the aspect ratio to [16:9].• Th ese HDMI connectors are “type A”.• Th ese HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content

Protection) copyright protection.• An equipment having no digital output terminal may be connected to the input terminal of

“COMPONENT” or “VIDEO” to receive analogue signals.• Th is TV incorporates HDMI™ technology.1: Th e HDMI logo is displayed on HDMI-compliant equipment.2: Enquire at your local digital equipment retailer shop.

Music mode

The thumbnail of music folders in the USB Flash Memory will be displayed. Example : Thumbnail - [Folder view]

OPTION

My Music_1 My Music_2 My Music_3

Media Player Music Folder view

USB EXIT Select RETURN

Play Folder Contents Select

Info Access Option MenuDrive Select

• To display the information of the highlighted folder

INFO

1/3

My Music_1 Folder name

Number of files 11

Folder number / Total folder number

Playback from Folder view All the files in the selected folder will be played back.

Playback from File viewSelected file will be played back.

Select the folder Start Select the folder Select the file Start

OK

R

OK

Access

SelectOK

R

• To display the information of the highlighted title

How to operate playback• To display / hide the operation guide

INFO

• To operate playback

OK

Rewind Pause / Playback Fast forward Stop

• To the previous trackR

• To the next trackG

• To return to thumbnailRETURN

Music Setup - Setup the settings for Music mode Display the option menuOPTION

SetMusic Setup Menu

Repeat One

OK Change

[Folder]: Playback repeat within the selected folder

[One]: Playback repeat on the selected one file

[Off]: Playback repeat off

Select [Music Setup]

OK Access

INFO

Technical Information

13


PC connection

A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.• PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning

frequency 59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).

• A PC adaptor is not necessary for the DOS/V-compliant D-sub 15-pin connector.NOTES• Some PC models cannot be connected to this TV.• When using PC, set the colour display quality of PC to the highest position.• For details of the applicable PC signals, see p. 14.• Max. display resolution

Aspect 4:3 1,024 × 768 pixels16:9 1,366 × 768 pixels

• D-sub 15-pin connector signal

Pin No. Signal Name Pin No. Signal Name Pin No. Signal NameR GND (Ground) NC (not connected)G GND (Ground) NC (not connected)B GND (Ground) HDNC (not connected) NC (not connected) VDGND (Ground) GND (Ground) NC (not connected)

Input signal that can be displayed

COMPONENT (Y, PB/CB, PR/CR), HDMI Mark: Applicable input signal

Signal name COMPONENT HDMI525 (480) / 60i525 (480) / 60p625 (576) / 50i625 (576) / 50p750 (720) / 60p750 (720) / 50p1,125 (1,080) / 60i1,125 (1,080) / 50i1,125 (1,080) / 60p1,125 (1,080) / 50p1,125 (1,080) / 24p

PC (from HDMI terminal)Applicable input signal for PC is basically compatible to HDMI standard timing.

Signal name Horizontal frequency (kHz) Vertical frequency (Hz)640 × 480 @60 Hz 31.47 60.00750 (720) / 60p 45.00 60.001,125 (1,080) / 60p 67.50 60.00

PC (from D-sub 15P)Applicable input signal for PC is basically compatible to VESA standard timing.

Signal name Horizontal frequency (kHz) Vertical frequency (Hz)640 × 400 @70 Hz 31.47 70.07640 × 480 @60 Hz 31.47 59.94640 × 480 @75 Hz 37.50 75.00800 × 600 @60 Hz 37.88 60.32800 × 600 @75 Hz 46.88 75.00800 × 600 @85 Hz 53.67 85.06852 × 480 @60 Hz 31.44 59.891,024 × 768 @60 Hz 48.36 60.001,024 × 768 @70 Hz 56.48 70.071,024 × 768 @75 Hz 60.02 75.031,024 × 768 @85 Hz 68.68 85.001,280 × 1,024 @60 Hz 63.98 60.021,280 × 768 @60 Hz 47.70 60.001,366 × 768 @60 Hz 48.39 60.04Macintosh13” (640 × 480) 35.00 66.67Macintosh16” (832 × 624) 49.73 74.55Macintosh21” (1,152 × 870) 68.68 75.06

NOTES• Signals other than the above may not be displayed properly.• Th e above signals are reformatted for optimal viewing on your display.• PC signal is magnifi ed or compressed for display, so that it may not be possible to show fi ne

detail with suffi cient clarity.

Media Player

USB Flash MemoryFormat : FAT16, FAT32 or exFAT Supported fi le format in Media Player

Photo

Format File extension Image resolution(pixel) Details / Restrictions

JPEG .jpg 8 × 8to30,719 × 17,279

DCF1 and EXIF2 standardsSub-sampling: 4:4:4, 4:2:2, 4:2:0• Progressive JPEG is not supported.

1: Design rule for Camera File system - unifi ed standard established by Japan Electronics and Information Technology Industries Association (JEITA)

2: Exchangeable Image File - image fi le format used by digital cameras14


MusicCodec File extension Restrictions

MP3 .mp3 –

NOTE• Some fi les may not be played back even if they fulfi l these conditions.• Do not use two-byte characters or other special codes for data.• Th e device may become unusable with this TV if the fi le or folder names are changed.

Stereo / Bilingual Sound Selection

When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the Sound Selection button.

Audio Signal STEREO MAIN I SUB II MONOMode

Indicator

NICAM .......Used in New Zealand, Singapore, Hong Kong, etc.

Type of broadcast

Regular broadcast(Standard Audio)

Regular + NICAM MONO I

(MAIN I )NICAMSTEREO

NICAM DUAL MONO

(MAIN I / SUB II )Mode

IndicatorNo

IndicatorI II

A2 (German) .......Used in Australia, Malaysia, etc.Type of

broadcastRegular broadcast(Standard Audio)

BILINGUAL or DUAL MONO: MAIN I / SUB II STEREO

Mode Indicator

No Indicator

• If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching occurs, it is recommended you switch from STEREO to MONO.

• Even when the contents of the receiving signal undergo changes, selection mode is kept intact.• When the receiving conditions deteriorate, listening will be easier if the mode is set to the

MONO position, using the Sound Selection button.• DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some

countries.

FAQsBefore requesting service or assistance, please follow these simple guides to resolve the problem. If problem still persists, please contact your local Panasonic dealer.

White spots or shadow images (noise)• Check the position, direction, and connection

of the aerial.• Keep the space between the TV and RF cable.Neither image nor sound is produced• Is the TV in “AV mode”?• Is the mains lead plugged into the socket outlet?• Is the TV turned On?• Check [Picture Menu] and volume.• Check all required cables and connections are

firmly in place.An error message appears• Follow the message’s instructions. • If the problem persists, contact your local

Panasonic dealer.There may be red spots, blue spots, green spots and black spots on the screen• This is a characteristic of liquid crystal panels

and is not a problem. The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue or black. Please note this does not affect the performance of your LCD and it is not a quality problem.

The LCD panel moves slightly when it is pushed with a fingerClattered sound might be heard• There are some looseness around the panel to

prevent damage to the panel.The panel might move slightly when it is pushed with a finger, and clattered sound might be heard. This is not a malfunction.

TV goes into “Standby mode”• Auto power standby function is activated.• The TV enters Standby mode about 30 minutes

after broadcasting ends.No sound is produced• Is “Sound Mute” active?• Is the volume set to the minimum?

The remote control does not work or is intermittent• Are the batteries installed correctly?• Has the TV been switched On?• Point the remote control directly at the front of

the TV (within a 30 degree angle of the front of the TV).

• Situate the TV away from sunshine or other sources of bright light not to shine on the TV’s remote control signal receiver.

Sound is unusual• Set the sound setting of the connected equipment

to “2ch L.PCM”.• Check the [HDMI Input] setting in the Sound

Menu.• If digital sound connection has a problem, select

analogue sound connection.Sound level is low or sound is distorted• Sound signal reception may be deteriorated.• Set [MPX] in the Sound Menu to [Mono].Pictures from external equipment are unusual when the equipment is connected via HDMI• Is the HDMI cable connected properly? • Turn Off the TV and equipment, then turn them

On again. • Check an input signal from the equipment.• Use an equipment compliant with

EIA/CEA-861/861B.No image can be displayed• Is [Colour] or [Contrast] in the Picture Menu set

to the minimum?Blurry or distorted image (no sound or low volume)• Reset channel.Chaotic image, noisy• Change the setting of [P-NR] in the Picture

Menu (to remove noise).• Check nearby electrical products (car,

motorcycle, fluorescent lamp).Unusual image is displayed• Turn off the TV Mains power, then turn it on

again.

15


SpecificationsPower Source AC AUTO 110-240 V, 50 / 60 Hz

Powe

r Co

nsum

ption Power Rating 45 W

Standby condition 0.3 W

Disp

lay

pane

l Panel system TFT LCD Module with LED BacklightVisible screen size (diagonal) 80 cm / 32 inches

Number of pixels 1,049,088 (1,366 (W) × 768 (H))

Soun

d Speaker (90 mm × 25 mm) × 2 pcs, 8 Audio Output 10 W (5 W + 5 W), 10% THD

Receiving Channels

VHF BAND2-12 (PAL/SECAM B, K1)0-12 (PAL B AUST.)1-9 (PAL B N.Z.)1-12 (PAL/SECAM D)1-12 (NTSC M Japan)2-13 (NTSC M USA)

UHF BAND21-69 (PAL G, H, I/

SECAM G, K, K1)28-69 (PAL B AUST.)13-57 (PAL D, K)13-62 (NTSC M Japan)14-69 (NTSC M USA)

CATVS1-S20 (OSCAR)1-125 (USA CATV)C13-C49 (JAPAN)S21-S41 (HYPER)Z1-Z37 (CHINA)5A, 9A (AUST.)

Aerial - Rear VHF / UHF

Operating Conditions Temperature : 0 °C - 40 °CHumidity : 20 % - 80 % RH (non-condensing)

Conn

ectio

n Te

rmin

als

AV1 Input

AUDIO L - R RCA PIN Type × 2 0.5 V[rms]VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω)

COMPONENT YPB/CB, PR/CR

1.0 V[p-p] (including synchronization) ±0.35 V[p-p]

AV2 Input

AUDIO L - R RCA PIN Type × 2 0.5 V[rms]VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω)

Audio Output AUDIO L - R RCA PIN Type × 2 0.5 V[rms]

HDMI Input TYPE A Connectors

PC

HIGH-DENSITY D-SUB 15PINR,G,B: 0.7 V[p-p] (75 Ω)HD, VD: TTL Level 2.0 – 5.0 V[p-p] (high impedance)• Applicable input signals:VGA, SVGA, WVGA, XGASXGA, WXGA ······(compressed)Horizontal scanning frequency 31 - 69 kHzVertical scanning frequency 59 - 86 Hz

USB USB 2.0 TYPE A Connectors × 1DC 5 V, Max. 500 mA

Dimensions ( W × H × D ) 766 mm × 519 mm × 196 mm (With Pedestal)766 mm × 466 mm × 61 mm (TV only)

Mass 8.5 k Net (With Pedestal)7.5 k Net (TV only)

Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

Receiving Systems / Band name1 PAL B, G, H

Reception of broadcast transmissions and Playback from Video Cassette Tape Recorders

8 NTSC 4.43/5.5 MHz

Playback from Special VCR’s or DVD

2 PAL I 9 NTSC 4.43/6.0 MHz3 PAL D, K 10 NTSC 4.43/6.5 MHz4 SECAM B, G 11 NTSC 3.58/5.5 MHz5 SECAM D, K 12 NTSC 3.58/6.0 MHz6 SECAM K1 13 NTSC 3.58/6.5 MHz

7 NTSC M(NTSC 3.58/4.5 MHz)

14 SECAM I15 PAL 60 Hz/5.5 MHz Playback from Special

Disc Players and Special VCR’s or DVD

16 PAL 60 Hz/6.0 MHz17 PAL 60 Hz/6.5 MHz

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.VGA is a trademark of International Business Machines Corporation.S-VGA is a registered trademark of the Video Electronics Standard Association.Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

License

Web Site : http://panasonic.net© Panasonic Corporation 2012

F0512-0Printed in Malaysia

Information on Disposal in other Countries outside the European UnionThis symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.


model no. operating instructions th-l32xm5k led tv …panasonic.ae/en/manuals/th-l32xm5m.pdf ·...

Documents