models: es-12 and es-15 - elitesteam - steam showers€¦ · models: es-12 and es-15 07/19 - 1 -...
TRANSCRIPT
Models: ES-12 and ES-15
07/19 Pub. No. 1038-C- 1 -
EliteSteam “ES”
EliteSteam “ES”
Important: Locate Publication No. 199ES “Steam Bath Important Safety Instructions”. This publication includes a Warning label which the Installer must secure to the wall near the entrance to the steam room in a highly visible location. This label and its additional safety information are packaged with the generator in the envelope containing the installation instructions. If it is lost or missing contact EliteSteam (800-555-6890) for a replacement Publication No. 199ES. This publication along with all documents must be left with the owner.
!
AD-240
Models: ES-12 and ES-15
07/19 Pub. No. 1038-C- 2 -
Modular Jacks
(Plug control cable into any connector)
Models: ES-12 and ES-15
07/19 Pub. No. 1038-C- 3 -
EC-120Auxilary Outside
Control
START
STOP
EC-150 Control MUST be installed inside the
steam room.
Models: ES-12 and ES-15ES-12/15 Single Phase Schematic
07/19 Pub. No. 1038-C- 4 -
ES-12 ES-15
Technical support, installation and service: [email protected] Tel: 800-555-6890Product sales, order inquiries and returns: [email protected]
Plug control cableinto any connector
* 90ºC Copper wire is required for steam generator connection. Minimum wire size shown. Installation shall be in accordance with NEC and local Electrical Codes.
675 15 63ES-15
ES-12 550 12 1
1
50
80
60
*Minimum Wire Size
Breaker Size AmpsPhaseVoltKW
Model No.
Max. Adjusted Cu. Ft. For Area Up To
3
4