modular automation production systems - mtab usa · modular automation production systems ... ly...
TRANSCRIPT
Modular Automation Production Systems
User configurable modules
Easy to design, assemble and execute
Skill development in automation design, trouble-
shooting and maintenance
Flexible Automation System (MAPS5)
This Modular Automation Production System (MAPS) is an exceptional system where no single unit /module in this system is static i.e. mod-ules can be configured into many number of grouped or stand-alone exercises.
Linear stacking modules contains base plates components. The capping module contains the top plate for assembly. The screwing modules contains the screws for the assembly. Sensor identifies the presence and type of part. The linear indexing module indexes to the next sta-tion, where it passes or rejects the part depending upon the type of material. The passed part is then indexed to next station where the capping takes place. Then a rotary transfer arm places the assembled part in the Rotary Table. The rotary table indexes to the screwing mod-ule for securing the two assembled components. Once screw is in place, the rotary table indexes to the stamping/ printing station. Final-ly the fully assembled part is placed on the conveyor by the linear pick & place.
All the modules are robust and standardized for flexible configuration. The system is supplied with complete PLC control module for easy plug-n-play functionality.
OPTIONAL MODULES AVAILABLE: Filling module, Drilling & Drill Depth Inspection System
Base Plate
Conveyor Linear Indexing Module
Pusher Module Capping Module
Linear Pick & Place Module
Screw Module
Dispensing Module Printing Module
Rotary Indexing Table Rotary Pick & Place Module
Air Supply Unit Valve Unit
The control system controls the entire operation of the MAPS. It has a control box with a PLC that is programmed suitably to con-trol the operation of each of the modules systematically so that the modules cooperate and work to execute specific processes. The system can also be used as PLC trainer and the students can learn PLC programming, wiring, etc.
Required Utilities:
Compressor (100 liter tank) 6-8 bar (100 psi) Windows-based PC with Windows 7 Professional or higher, Intel Core 2 Duo E 4300 with 2 x 1,8 GHz RAM : at least 4 GB Graphic Card : NVIDIA Quadro FX 550, 1 GB, USB Interface & With 1 DVD Drive, 19” TFT Monitor
Basic and Advanced Software:
- PLC Programming - Readymade applications - Circuit design and simulation - Fault Identification and correction - User friendly design- Easy to use & simulate - Adv. Software includes Hydraulic, Pneumatic, Electrical & Digital, PLC principles, application design and troubleshooting
Siemens PLC (40 digital inputs, 32 digital outputs, Communication Cable)
37 Pin D-type Male/Female Connector
Selector switch:12 position rotary switch to select the module to control.
E-Stop, start, stop Switch (22.5V)
24V Power supply, 4.5 Amps Touch Screen panel
ON/OFF Switch Transformer (12V AC)
230 V Male Plug 24v Compact Relay
Fuse Bank Sticker Layout
Skills Development Objective Basic concepts in automation.
Basic applications of automation in industries
Advanced applications of Sensors, Pneumatics in automation.
Demonstrate a familiarity in the working of such systems & Production Planning
Learn Robotics & Automation technology.
Study the actual control system used in industries
In-depth training in fault detection & correction
Learn about the maintenance & servicing of these systems
Sample Exercises: Programming of stacking module to index the part out to the linear indexing module and check for the type of parts.
Programming of Rotary Indexing Module with memory array for the station address.
Programming and control of screwing module and integrating with the printing module to form a closed loop system.
Programming & control of Linear Indexing Module. Program to manual triggered rotary indexing module to rotate by a slot and carry out the Screwing operation and move it to next position. Program for Auto conveyor transit / return for material transfer with timer and Feedback control.
Program to manual triggered rotary indexing module to rotate by two slots and carry out the Printing operation followed by placing the part in the conveyor module using the Linear pick & place. Program the pusher module to by-pass metal / Non-metal components and then carry out the capping operation and place the part for the next station using the rotary pick & place. Program to sensor trigger/manual triggered and to make the Linear indexing module to index by two positions capping module to carry out the capping process and returning back to the initial position.
MTAB ENGINEERS PVT LTD.
133, Developed plots, electrical and electronics industrial estate,
Perungudi, Chennai – 600 096, Tamil Nadu, INDIA. Phone: +91 44 4311 1113, 14 Fax: +91 44 2433 7655
Email: [email protected], [email protected] Website: www.mtabautomation.com
About MTAB
MTAB is a leading name in Advanced Manufacturing Technology for over 29 years. An ISO9001:2008 com-pany, it is headquartered in Chennai, India and has marketing offices and distribution partners across the world. MTAB is a world-class didactic manufacturers for CNC, Robotics, Mechatronics and Automation products. MTAB has been recognized for its contribution to the manufacturing technology field through several awards. MTAB works closely with customers to deliver the right solution that meet their needs.
Guiding your training vision with
• IHK Germany
• Siemens
• MTAB
• eCNC
• Robotics
• PLC
• Basic, Intermediate and Advanced software
• CNC
• Robotics
• FMS/CIM
• Mechatronics
Hardware Software
Certification Training
e-learning