modular video transport system october 2010 dl4000...

Video Over Fiber Optic Transport Systems Since 1981

Modular Video Transport SystemOctober 2010

DL4000

DL4000 CATALOG

www.artel.com | 978-263-5775 | [email protected] | [email protected]

When the world is watching, you can depend on Artel

Table of Contents

DL4000 Modular Video Transport System

System Overview 3

Chassis Specifications 4

Function Module Overview 5

SFP Optics (Small Form-Factor Pluggable) Overview 6

DLM130 DL-Manager EMS Module with Power Supply 8

DL-Manager™ SNMP, HTTP Element Management System (EMS) 9

DLC100 Multi-Rate, Multi-Function Digital Video Optical 10 Transceiver/Repeater

DLC150E SDI/SDTI 4 Channel Analog/Digital AES Audio Embed 12 and Optical Transmitter

DLC170AD Composite Video (NTSC/PAL) and Analog Audio to SDI 14 Conversion with Optical Transmitter

DLC170DA SDI to Composite Video (NTSC/PAL) Analog Audio 16 Conversion with Optical Receiver/Repeater

DLC200 10/100/1000Mb/s Ethernet Optical Transceiver/Repeater 18

DLC270 Composite Video (NTSC/PAL) and Analog Audio to SDI 20 Conversion with Multi-Rate Digital Video Optical Transmitter

DLC274 270Mb/s Digital Video 4-to-1 TDM Multiplexer with 22 Optical Transmitter/Receiver/Repeater

DLC300 3G-SDI Multi-Rate Digital Video Optical 24 Transmitter/Receiver/Repeater

DLC410 DVB-ASI and SD-SDI Video Over IP Gateway 26

DLT710 Multi-Format Digital Video Generator and Test Module 28

Optical Multiplexers DWDM, CWDM and WDM Modules 30

DLM010 and DLM020 Contact Alarm Modules 32

Accessories 33

Since 1981 Artel Video Systems

has been an industry leading developer of

carrier class, broadcast quality video over

fiber-optic transport hardware. Our products

reliably deliver video, audio, and data in

real time, meeting the most demanding

requirements for 24/7/365 operation in

harsh environments.

Artel products are some of the most widely

deployed video transport platforms in

history, placing us at the heart of video

transport networks worldwide.

AR205-008010-00_M DL4000_Catalog_10-10-27

DL4000

• Optical Transport of Video and Ethernet

• WDM, CWDM, DWDM Optical Multiplexers

• Video Format Conversion

• Video Signal Generators

• Video Test and Verification



In addition to the base DL4000 chassis, also available are the DL4042, DL4000P,

and DL4100. These chassis increase both the flexibility and cost effectiveness of the

platform. The DL4042 is a four slot chassis, sharing the dimensions of the DL4000 but

with dual internal AC power supplies. The DL4100 is a compact unit that holds a single

DL4000 based module, and the DL4000P is a passive 4 slot chassis designed to house

DL4000 based WDM, CWDM, and DWDM optical multiplexers.

FeaturesDL4000 Chassis Features• Spaceefficientrugged1RUchassis• Fourhot-swappablefunctionmodules• Dualhot-swappablepowersupplies • AC, DC, or dual (one of each)• Dualcoolingfans• Unlimitednon-spacedinstallation• Dependablepassivebackplane• Highspeedinterconnectbetween function modules, up to 72 Gb/s

• NEBSLevel3certifiedRemote Management of Chassis and Modulesvia DL-Manager

• Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• UpgradefirmwareModule Features• Ruggedizedsinglepiece• Frontpanelmonitoringofvideoand system status • Hot-swappable • Broadcastsvideotoother modules in chassis• NEBSLevel3certifiedSupported Formats• 2.967Gb/s(SMPTE424M)• 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s(SingleorfourChannelTDM) • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Artel 270• CompositeAnalogVideo&Audio(NTSC,PAL)• 19.39Mb/sATSC(SMPTE310M)• 10/100/1000EthernetExternally Accessible SFP Transceiver Optics• Opticalbudgetto34dB• WDM(1310nm,1550nm)• CWDMITUG.694.2(Channels27-61)• DWDMITUG.694.1(Channels21-60)

Modular Video Transport System Overview

The DL4000 Digital Video Transport System is a new generation of universal video

transport leveraging Artel’s more than 25 years of carrier class video transmission

experience. A small, rugged modular chassis, the DL4000 combines the space

efficiencyofa1RUchassiswiththeflexibilityofmulti-modulesystems.

Dual hot-swappable AC or DC power supplies

Side to rear cooling for unspaced stacking

Four hot-swappable function modules with externally accessible SFP Optics

DL4000

33

The DL4000 was designed from the ground

up to be a video transport platform.

Features such as multi-purpose, single

piece function modules, compact rugged-

izedonerackunitchassis,acommonsetof

external SFP optics, front panel accessible

status LEDs and monitoring for each mod-

uleareuniquetotheDL4000andareideal

for video transport applications. In addition,

apassivebackplanewithinternalmodule

to module interconnectivity and a NEBS

Level3certifieddesignmaketheDL4000

the most rugged and dependable video

transport platform ever developed.

DL4000 ViDEO TRAnSPORT SySTEM

Ordering information

Chassis Model DL4000 DL4042 DL4000P DL4100

Part # 390-008000-00 390-008001-00 390-008750-00 390-001000-00

Number of Function Module Slots

4 4 4 (Passive only) 1

Power Supplies1 or 2 AC, DC or one of each

(Hot Swappable)2 Internal AC

(Non-Removable)None 1 AC External

CoolingActive

(1 Fan per power supply)Active

(2 Fans)N/A Convection

Chassis Dimensions (h, w, d) 1.75” x 17.0” x 10.5” .83” x 5.88” x 10.5”

Chassis Wt. (Fully Populated) <10 lbs. <3 lbs.

Mounting Options

19inchrackunit Std Std Std Option

Table Std Std Std Std

Wall Std Std Std Option

Operating Temperature 0 to 50°C 0 to 40°C

Relative Humidity 10 to 95% (non-condensing)

Ambient Storage -40 to 80°C

Module to Module Internal Communication Yes No No No

Remote Monitoring and Man-agement via DL-Manager Yes No No No

Regulatory Conformance

NEBS Level 3 Certification Yes No No No

NEBS Level 3 Compliance Yes Yes Yes No

CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22 Yes Yes Yes Yes

Chassis Specifications

DL4100

DL4000

DL4000P

DL4042

4

DL4000

Power Supply Specifications

Chassis Model DL4000 DL4042 DL4100

DC Power Supply

DC Power Supply w/SNMP & HTTP

Management and Monitoring

AC Power Supply

AC Power Supply w/SNMP & HTTP

Management and Monitoring

Dual Internal AC External AC

Model DLP002 DLM130 DLP001 DLM130A Internal DLPE001

Part # 390-008005-00 390-008090-00 390-008002-00 390-008095-00 390-001002-00

Input Voltage -40 to -70 VDC 90to254VACat50or60Hz

Power Consumption (Max) 60 Watts (per chassis) 15 Watts

Current (Max) 1.5 Amps 1 Amp .25 Amp

BTU/hr(Max) 205 (per chassis) 55



Chassis SpecificationsDL4000


DL4000 Function Module Overview

DL4

00

0_C

has

sis_

DS_

10-1

0-0

7

5www.artel.com | 978-263-5775 | [email protected] | [email protected]


Function ModulesDL4000


Formats Supported Single Channel 100 150E 170AD 170DA 200 270 274M 274D 300 410 710 Comments

Composite Analog P P P

ATSC P P P

DVB-ASI P P P P P P P P

SD-SDI P P P P P P P* P * Native, Dithered Signal

SDTI P P P P P P P P

HD-SDI P P P P* * Native, Dithered Signal

3G-SDI P* * Native, Dithered Signal

10/100/1000 Ethernet P

Multi-Channel 100 150E 170AD 170DA 200 270 274M 274D 300 410 710 Comments

Composite Analog P* P* P* P P *UsedinconjunctionwithDLC274

DVB-ASI P P P

SD-SDI P P P

SDTI P P P

Optical Functions

Function 100 150E 170AD 170DA 200 270 274M 274D 300 410 710 Comments

Transmitter P P P P P P P P

Receiver P P P P P P

Repeater P P P P

Transceiver P P

Dual Transmitter P

Dual Receiver P* * Automatic switchover on loss of signal

Dual Repeater P* * Automatic switchover on loss of signal

Repeater Compatibility 100 150E 170AD 170DA 200 270 274M 274D 300 410 710 Comments

DLC100 P P P P P P P P* * Excludes 3G-SDI Mode

DLC200 P

DLC300 P P P P P P P P

Other FunctionsFormat Conversion 100 150E 170AD 170DA 200 270 274M 274D 300 410 710 Comments

Audio Embed into SDI P P P

Audio De-Embed from SDI P

Composite Analog to SDI P P

SDI to Composite Analog P

ATSC to DVB-ASI P* * In Transmit Mode

Test Signal Generator 100 150E 170AD 170DA 200 270 274M 274D 300 410 710

Composite Analog P P

ATSC P

DVB-ASI P

SD-SDI P P

HD-SDI P P

3G-SDI P P

Signal Test & Verification 100 150E 170AD 170DA 200 270 274M 274D 300 410 710

ATSC P

DVB-ASI P

SD-SDI P

HD-SDI P

3G-SDI P



Small Form-Factor Pluggable Optics

TheDL4000VideoTransportSystemutilizesacommonsetofexternally

accessible Small Form-Factor Pluggable (SFP) optics. SFPs are both an optical

transmitter and wide band receiver and feature standard LC connectors. For ease

of deployment and sparing DL4000 SFPs are designed to be compatible across

virtually the entire platform.


Artel designed the DL4000 Video Transport System to be the most easily

deployed and maintained Fiber Optic Transport System ever developed. This

included designing the system with a common set of externally installed SFP

optics. These SFPs are available in 1310nm, 1550nm, 18 CWDM and 40 DWDM

channels and include a wide band optical receiver. This enables a variety

offlexibledeploymentswithsignificantlylessstockedopticalcomponents.

CompatibilitywithDL4000,MegaWavandotherITUG694standardmultiplex-

ersallowcreationofflexiblefiberefficientopticalnetworks.

Features

industry Standard SFP TransceiversTransmit and Receive in one flexible unit

Formats Supported:• 2.976Gb/s3G-SDI(SMPTE424M)• 1.485Gb/sHD-SDI(SPMTE-292)• SD-SDI(SMPTE259M-CITU656)• SDTI(SMPTE305M)• DVB-ASI• Artel270• CompositeAnalogVideo&Audio (NTSC, PAL)• 19.39Mb/sATSC(SMPTE310M)• 10/100/1000Ethernet

industry standard wavelengths• 1310nm• 1550nm• CWDM(ITUG.694.2) • DWDM(ITUG.694.1)

Up to 34dB loss budget LC/PC Optical Connectors Compatible with:• DL4000OpticalFilters• MegaWav• OtherITUG.694StandardFilters

WDM and CWDM support transmission and reception of SDi and HD-SDi pathological patterns

SFP

6

CompatibilityModel DLS31VX-11 DLS31VX3G-11 DLS31VX-30 DLS55VX-30 DLSCxxVX-30 DLSWxxHX-33

DLC100 P P P P P

DLC150E P P P P P

DLC170AD P P P P P P

DLC170DA P P P P P

DLC270 P P P P P

DLC200 P P P P P P

DLC274M/D P P P P P P

DLC300 P P P P P P

DLT710 N/A N/A N/A N/A N/A N/A

Note 1: Excluding 3G ModeNote2:Ditherrequired

(1) (1) (1) (1) (2)

WDM CWDM DWDM

Model DLS31VX3G-11 DLS31VX-30 DLS55VX-30 DLS31VX3G-30 DLS55VX3G-30 DLSCxxVX-30 DLSWxxHX-33

Optical Budget 11dB 30dB 30dB 30dB 30dB 30dB 33dB

Transmitter

Wavelength 1310nm ±30nm 1310nm ±30nm 1550nm ±40nm 1310nm ±30nm 1550nm ±40nm

ITUG.694.2 Standard

1271 through 1611 ±6.5nm

ITU-TG.694.1Standard

Channels 21-60

Optical Output Power (Min) -7dBm 0dBm 0dBm +2dBm +2dBm 0dBm +4dBm

Optical Output Power (Max) -2dBm +3dBm +3dBm +5dBm +5dBm +3dBm +7dBm

Spectral Width 3nm 1nm 1nm 1nm 1nm 1nm .4nm

Dispersion Penalty N/A N/A 1dB@120km N/A 2dB@80km 2dB@120km 1dB@120km

Receiver

Receiver Sensitivity -18dBm -30dBm -30dBm -28dBm -28dBm -30dBm -29dBm

Maximum Input -2dBm -9dBm -9dBm -9dBm -9dBm -9dBm -9dBm (3)

Input Wavelength 1270 to 1610nm 1250 to 1620nm 1250 to 1620nm 1250 to 1620nm 1250 to 1620nm 1250 to 1620nm 1250 to 1620nm

Bit Error Rate 10-13 10-13 10-13 10-13 10-13 10-13 10-13

Maximum Bit-Rate 3.0Gb/s 1.5Gb/s 1.5Gb/s 3.0Gb/s 3.0Gb/s 1.5Gb/s 3.0Gb/s

SFP_

DS_

10-1

0-2

7

Small Form-Factor Pluggable (SFP) Optics Specifications

DWDM Transceiver (33dB) Maximum Bit-Rate 3Gb/s

Model Channel Freq Approx Center Part # Number (THz) Wavelength (nm)

DLSW21HX-33 21 192.1 1560.61 393-240033-21 DLSW22HX-33 22 192.2 1559.79 393-240033-22 DLSW23HX-33 23 192.3 1558.98 393-240033-23 DLSW24HX-33 24 192.4 1558.17 393-240033-24 DLSW25HX-33 25 192.5 1557.36 393-240033-25DLSW26HX-33 26 192.6 1556.55 393-240033-26DLSW27HX-33 27 192.7 1555.75 393-240033-27DLSW28HX-33 28 192.8 1554.94 393-240033-28DLSW29HX-33 29 192.9 1554.13 393-240033-29 DLSW30HX-33 30 193.0 1553.33 393-240033-30DLSW31HX-33 31 193.1 1552.52 393-240033-31 DLSW32HX-33 32 193.2 1551.72 393-240033-32DLSW33HX-33 33 193.3 1550.92 393-240033-33 DLSW34HX-33 34 193.4 1550.12 393-240033-34 DLSW35HX-33 35 193.5 1549.32 393-240033-35DLSW36HX-33 36 193.6 1548.51 393-240033-36 DLSW37HX-33 37 193.7 1547.72 393-240033-37 DLSW38HX-33 38 193.8 1546.92 393-240033-38DLSW39HX-33 39 193.9 1546.12 393-240033-39 DLSW40HX-33 40 194.0 1545.32 393-240033-40 DLSW41HX-33 41 194.1 1544.53 393-240033-41 DLSW42HX-33 42 194.2 1543.73 393-240033-42DLSW43HX-33 43 194.3 1542.94 393-240033-43 DLSW44HX-33 44 194.4 1542.14 393-240033-44 DLSW45HX-33 45 194.5 1541.35 393-240033-45DLSW46HX-33 46 194.6 1540.56 393-240033-46DLSW47HX-33 47 194.7 1539.77 393-240033-47DLSW48HX-33 48 194.8 1538.98 393-240033-48 DLSW49HX-33 49 194.9 1538.19 393-240033-49DLSW50HX-33 50 195.0 1537.40 393-240033-50 DLSW51HX-33 51 195.1 1536.61 393-240033-51DLSW52HX-33 52 195.2 1535.82 393-240033-52 DLSW53HX-33 53 195.3 1535.04 393-240033-53 DLSW54HX-33 54 195.4 1534.25 393-240033-54 DLSW55HX-33 55 195.5 1533.47 393-240033-55 DLSW56HX-33 56 195.6 1532.68 393-240033-56 DLSW57HX-33 57 195.7 1531.90 393-240033-57 DLSW58HX-33 58 195.8 1531.12 393-240033-58 DLSW59HX-33 59 195.9 1530.33 393-240033-59 DLSW60HX-33 60 196.0 1529.55 393-240033-60


7

CWDM Video Transceiver (30dB) Maximum Bit-Rate 1.5Gb/s

Model Channel Optical Part #

Number Wavelength

DLSC27VX-30 27 1271nm 393-041271-00 DLSC29VX-30 29 1291nm 393-041291-00 DLSC31VX-30 31 1311nm 393-041311-00 DLSC33VX-30 33 1331nm 393-041331-00 DLSC35VX-30 35 1351nm 393-041351-00 DLSC37VX-30 37 1371nm 393-041371-00 DLSC39VX-30 39 1391nm 393-041391-00 DLSC41VX-30 41 1411nm 393-041411-00 DLSC43VX-30 43 1431nm 393-041431-00 DLSC45VX-30 45 1451nm 393-041451-00DLSC47VX-30 47 1471nm 393-041471-00 DLSC49VX-30 49 1491nm 393-041491-00 DLSC51VX-30 51 1511nm 393-041511-00 DLSC53VX-30 53 1531nm 393-041531-00 DLSC55VX-30 55 1551nm 393-041551-00 DLSC57VX-30 57 1571nm 393-041571-00 DLSC59VX-30 59 1591nm 393-041591-00 DLSC61VX-30 61 1611nm 393-041611-00

Model Optical Wavelength Max Bit-Rate Part#

DLS31VXG-11 1310nm 3.0Gb/s 393-051310-11DLS31VX-30 1310nm 1.5Gb/s 393-021310-00DLS55VX-30 1550nm 1.5Gb/s 393-021550-00DLS31VX3G-30 1310nm 3.0Gb/s 393-051310-30DLS55VX3G-30 1550nm 3.0Gb/s 393-051550-30



(RX)Ethernet (TX)

ManagementInterface

Power toModules

PowerConversion

ManagementProcessor

PHY

Power Monitoring& Cooling Control

Input Power

integrated Management and Power in One Slot

DL Monitor Access for:• DL4000chassis

• Functionmodules

• OtherPowerSupplyinchassis

10BaseT/100BaseTX Ethernet interface:• TCP/IPprotocol

• 10/100autonegotiation

• Autofull-duplexandhalf-duplexauto negotiation

• RJ45connector

Space Efficient• Noslotoverheadwithintegratedpower and management in one slot

Panel status LEDs• AlarmStatus

• EMSsoftwarestatus

DL-Manager EMS Module with Power Supply

The DLM130 is an innovative Element Management System and Power Supply

ModulefortheDL4000.TakingasinglepowersupplyslotintheDL4000chassis,

the DLM130 provides power as well as access to the on board DL-Manager Element

Management System via a 10BaseT Ethernet.

DLM130

EnvironmentOperating Temperature 0 to 50°C of DL4000 Chassis

Ambient Storage -40 to 80°C Temperature

Relative Humidity 10 to 95% (non-condensing)

Power Dissipation 8W

PhysicalDimensions 1.6” x 3.5” x 9.5” 1 power supply slot in DL4000 chassis

Electrical interfaceConnector RJ45Data Rates 10Mb/s 100Mb/s CableEqualization 0to100meters(10Mb/s,100Mb/s)

SnMPStandard MIB II

PowerDC Specifications (with dual power supplies)Voltage -40 to -70 VDCPower Consumption 60 Watts (max.)BTU/hr 205

AC Specifications (with dual power supplies using DLM130P AC Adapter)

Voltage 90to254VACat50or60HzPower Consumption 75 Watts (max.)BTU/hr 257

Regulatory ConformanceCompliance: NEBS Level 3, CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22

Ordering informationPower Supplies

Model Description Part #

DLM130 EMS Management Module with 390-008090-00 Power Supply

DLM130P AC Adapter for EMS Management Module 390-008091-00

DLM130A EMS Management Module with 390-008095-00 Integrated Power Supply and AC Adaptor

Specifications are subject to change without notice.

DLM130 EMS Management Module with Power Supply Specifications


8

9

DLM

130

_D

S_10

-10

-27

SnMP V2c and Web Monitoring and Management of:• DL4000Chassis• PowerSupplies• FunctionModules

Monitoring• Autodetectcardsandconfigurations• Majorandminoralarmsandevents• Detailedcardstatus• Alarmstatus• Alarmdetails• Receivelightlevels• Temperature• Videostatusandrates• Errorlogs

Provisioning• Overrideonboardswitchsettings• Enableanddisabletransportmodes and channels

Maintenance• Download/upgradefirmwareonline cards,powersuppliesandbackplane• Download/upgrademanagement software

DL-Manager™SnMP, HTTP Element Management System (EMS)

DL-Manager is an HTTP or SNMP v2

based Element Management System

for monitoring and managing the

DL4000 chassis and function modules.

Embedded in the DL4000 chassis,

power supply and function modules,

DL-Managerrequiresnoexternal

software to monitor, override on

board switches, or configure a DL4000

system.Usingindustrystandardrout-

ers, multiple chassis can be monitored

through a single ethernet connection.


Shelf View with Alarms

Power Supply StatusModule Configuration Override

Module View

Configuring the DLM130

Directory View -- network to Module Drill Down



TheDLC100isuniqueinthatonecardcanfunctionasatransmitter,receiver,

transceiver for bi-directional application or a repeater. This reduces inventory cost

and simplifies deployment. The DLC100 provides 4 bi-directional multi-rate circuits in

asinglerackunit.

For additional flexibility the DLC100 uses industry standard 1310nm, 1550nm, and CWDM

Small Form-Factor Pluggable (SFP) optics. Provisioning and monitoring is accomplished

usingswitches,LEDs,dualfrontandbackmonitorjacks,SNMPorHTTPviaDL-Manager.

FeaturesSingle Card Configurable as:• Transmit(electricaltooptical)

• Receive(opticaltoelectrical)

• Bi-directional(independenttransmit and receive)

• Repeat/Regenerate(opticaltooptical)

Automatic rate selection

Supports all digital formats• 1.485Gb/sHD-SDI(SMPTE292M)

• 270Mb/s

• SD-SDI(SMPTE259M-C,ITU656)

• SDTI (SMPTE 305M)

• DVB-ASI

• Artel 270

• 19.39Mb/sATSC(SMPTE310M)

• InternalswitchselectableratelockoutExternally Accessible SFP Transceiver Optics• Opticalbudgetto34dB• WDM(1310nm,1550nm)• CWDMITUG.694.2(Channels27-61)

inputs/Outputs• OpticalviaSFPs

• Electricalinput(1)andoutputs(3) via 75ohmΩ BNC

• Inputfromandoutputtoothermodules inDL4000Chassis(viabackplane)

Multiple monitor options• Frontpanelmonitorselectablebetween optical input and optical output (Mini 75ohm SMB)

• FrontandrearpanelstatusLEDs

Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware

Multi-Rate, Multi-Function Digital Video Optical Transceiver/Repeater

The DLC100 is a flexible, bi-directional fiber optic transport module for all digital

video formats from 19.39Mb/s to 1.485Gb/s. The DLC100 supports all digital

formats including compressed and uncompressed HDTV, SDI and DVB-ASI.


Chassis Slot #1

Chassis Slot #2

Chassis Slot #3

Chassis Slot #4

Digital VideoElectrical (IN)

Digital VideoOptical (RX)

Digital VideoLoop Through

Electrical (THRU)

Chassis Slot #1

Chassis Slot #2

Chassis Slot #3

Chassis Slot #4

ManagementInterface

ProcessorPower

Controller

Digital VideoOptical (TX)

Digital VideoElectrical (OUT 1)

Digital V ideoElectrical (OUT 2)

Video Monitor (MON)

EQ

SFPOptical toElectrical

SFPElectricalto Optical

DLC100

10

Specifications

EnvironmentalAmbient Storage -40 to 80°C TemperatureAmbient Operating 0 to 50°C Temperature of DL4000 Chassis Relative Humidity 10 to 95% (non-condensing)Power Dissipation 6W

PhysicalDimensions 0.8" x 5" x 10.8" 1 slot in DL4000 chassis

Optical interfaceArtel Video SFP See SFP Specification Sheet

Electrical interfaceSignal Formats •1.485Gb/s - HD-SDI (SMPTE 292M) •270Mb/s -SD-SDI(SMPTE259M-C,ITU656) - SDTI (SMPTE 305M) - DVB-ASI -ARTEL 270 •19.39Mb/s ATSC (SMPTE 310M) Signal Polarity Non Inverting Channels 1-transmit, 1-receive Connectors Input (1) BNC 75ohm Loop Through (1) BNC 75ohm Output (2) BNC 75ohm Monitor Mini 75ohm SMB ReturnLoss >15dB,5-1485MHz CableEqualizationforBelden 0to350meters(270Mb/s) 1694A type cable: 0 to 140 meters (1485 Mb/s)

Regulatory Conformance Compliance: NEBS Level 3, CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22

Ordering informationDLC100 Function Module


DLC100 DLC Multi-rate, multi-function 390-008015-00

Video Transceiver

SFP Optics


DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00 DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00 DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00

Monitor Cable


DL100MC-72 Monitor Cable, Mini 75ohm 396-001001-00

SMB to BNC, 72”L


DLC

100

_D

S_10

-10

-07 Rear panel includes electrical Input, loop thru,

dual electrical outputs and SFP transceiver cage

Front panel monitoring and status displays SFP Optics (Small Form-Factor Pluggable)

11

CoaxCoax Optical Fiber Link

Single Channel Digital Video Optical Transport

DLC100Optical

Transceiver

DLC100Optical

Transceiver

HD-SDISD-SDI

ASIATSC

HD-SDISD-SDI

ASIATSC

CoaxCoax Optical

Fiber Link

Single Channel Digital Video Optical Transport with Repeater

DLC100Optical

Transceiver

DLC100Optical

Transceiver

HD-SDISD-SDI

ASIATSC

HD-SDISD-SDI

ASIATSC

DLC100Optical

Transceiver Optical Fiber Link

CoaxOptical Fiber Link

Bi-Directional Digital Video Optical Transport

DLC100Optical

Transceiver

DLC100Optical

Transceiver

HD-SDISD-SDI

ASIATSC

HD-SDISD-SDI

ASIATSC

Coax

Coax

HD-SDISD-SDI

ASIATSC

HD-SDISD-SDI

ASIATSC

Coax

DLC100 Applications



Features

Single Card Audio Embedder and Video Transport

Embed into SDi or SDTi• OnetoFourAnalogaudio channels• OneortwoAES-3audiopairs• Asynchronousorsynchronousdigitalaudio• Standbyvideosignalcontinuesto deliver audio on loss of video input

Optical Transport (with or without embedded audio)• SD-SDI(SMPTE259M-C,ITU656)• SDTI(SMPTE305M)• DVB-ASI• Artel270• AnalogAudio(4)• AES-3(2stereopairs)• FullReclockingremovesjitterfromSDI

Externally Accessible SFP Transceiver Optics• Opticalbudgetto34dB

• WDM(1310nm,1550nm)

• CWDMITUG.694.2(Channels27-61)

inputs • Video(withorwithoutembeddedaudio)

• 75ohm BNC

• Other modules on DL4000 Chassis(viabackplane)

• Audio

• Analog Audio via 600ohm or high-Z balanced

• AES-3 110ohm balanced

• AES-3 75ohm unbalanced (DLC150E/D)

Outputs• OpticalviaSFP

• OthermodulesinDL4000Chassis (viabackplane)

Multiple Monitoring Options•Frontpanelmonitor(Mini75ohm SMB) selectable between: • Input video (pre-embed) • Output video (post-embed)•FrontandrearpanelstatusLEDs


SDi/SDTi 4 Channel Analog/Digital AES Audio Embed and Optical TransmitterDL4000 ViDEO TRAnSPORT SySTEM

The DLC150E is a flexible audio embedder and video transport card designed for use

in the DL4000 Digital Video Transport System. The DLC150E will embed analog or AES

audio into SDI and SDTI as well as transport all standard 270Mb/s digital formats.

The DLC150 functions as both an audio embedder for four channel analog or two stereo pair

AES-3 audio, and as a 270Mb/s video over fiber optics transport module. The DLC150 uses

industry standard 1310nm, 1550nm, and CWDM Small Form-Factor Pluggable (SFP) optics.

Provisioningandmonitoringisaccomplishedusingswitches,LEDs,frontmonitorjack,SNMP

or HTTP via DL-Monitor.

Analog Audio #1AES-3 #1 (bal)

Analog Audio #2

Analog Audio #3AES-3 #2 (bal)

Analog Audio #4Digital Video

Backplane #1

Backplane #2

Backplane #3

Backplane #4

Optical In

Backplane #1

Backplane #2

Backplane #3

Backplane #4

Monitor

OpticalOutput

RateMatch

A-D

A-D

RateMatch

A-D

A-D

AESEncode

AESEncode


StandbyVideo or

Keep AliveGenerator

EmbedandEDH

ProcessorPowerController

ManagementInterface


DLC150E

12

DLC150E Applications

DLC

150E

_D

S_10

-10

-07

EnvironmentalOperating Temperature 0 to 50° C of DL4000 Chassis Ambient Storage Temperature -40 to 80°C Relative Humidity 10 to 95% (non-condensing) Power Dissipation 10W

PhysicalDimensions 0.8” x 5” x 10.8”

1 slot in DL4000 chassis


Analog Audio Features

SMPTE 272M embedding of 2 analog stereo pairs (one to four analog signals) in SD-SDI (SMPTE 259M) or SDTI (SMPTE 305M)• 24-bitsampling@48kHz• 600ohmbalancedandhigh-impedancebalancedinput(3-position terminalblock)• 0dBFS(fullscale)adjustablefrom+16dBmto+28dBmin2dBsteps(600ohm)• Selectabletargetgroup(0,1,2,3)• Optiontonotembedifaudiopresentinthetargetgroup

• Optiontodisableembeddingfortransport-onlyapplications

Analog Audio SpecificationsQuantizing 24-bitSamplingRate 48kHzNumber of Channels 4 analog audio balancedConnector 3-positionterminalblockplugsInput Impedance 600ohm or >100Kohm, SwitchableInput Return Loss >30 dB (600ohm)InputCommonModeRejection >60dB20Hz-20kHzInput Common Mode Range +/-10 V (20Vp-p)Maximum Input Level (clipping) 0 dBFS = +10 to +24dBm (600ohm) Adjustablein2dBsteps AmplitudeFrequencyResponse +/-0.1dB(20Hzto20kHz)Distortion(THD+N) <0.05%(20Hz-20kHz@+18dBm)IntermodulationDistortion <0.05%(SMPTERP12,60/7k,4:1)Audio Signal-to-Weighted- > 90 dBA (referred to +18 dBm) Noise RatioAudioChannelCrosstalk <-70dB(20Hz-20kHz)VideoCrosstalk -85dBInsertion Gain 0.0 dB +/- 0.2dBInterchannel Phase Delay <1°(20Hz-20kHz)Audio-Video Delay <10 ms


AES-3 Audio Features

SMPTE 272M embedding of 2 digital audio streams (two stereo pairs) in SD-SDI (SMPTE 259M) or SDTI (SMPTE 305M)• InterfacesA,B,C,D,E,F,andG• AES-3audiostreamsupportfor110-ohmbalanced(3-positionterminalblock)• AES-3audiostreamsupportfor75-ohmunbalanced(BNC)[Note:separateorder number for unbalanced input]• Synchronous(48kHz)andasynchronous(32.0kHz,44.1kHz,48kHz)streams supported• Selectabletargetgroup(0,1,2,3)• Optiontonotembedifaudiopresentinthetargetgroup• Optiontodisableembeddingfortransport-onlyapplications

Digital Video Features

Transport of all 270Mb/s digital video • SD-SDI(SMPTE259M)• SDTI(SMPTE305M)• DVB-ASI(noaudioembedding)• Artel270(noaudioembedding)• AutomaticdetectionJittercleanupofSD-SDIandSDTI75ohm BNC input• >15dBreturnloss• Cableequalizationupto300m(Belden8281orequivalent)EDHcheckingandgenerationforSD-SDIandSDTIStandby Video Generator• SelectableSD-SDIsignalallowsaudiotobedeliveredwheninputvideoislost• Selectablenon-videokeepalivemaintainslinkoperationwhileallowing downstreamequipmenttodetectlossofsignalwheninputvideoislostDLC150Ecanbecascadedviabackplaneinputsandoutputsformulti-group

embedding

Regulatory Conformance Compliance: NEBS Level 3, CSA 60950, EN60950, EN55022 FCC Part 15 (Class A), CISPR 22

Ordering informationDLC 150E Function Module

Model Description Part # DLC150E SDI Audio Embedder with Optical Transmitter 390-008050-00

SFP OpticsModel Description Part #DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00 DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00

Monitor CableModel Description Part #DL100MC-72 Monitor Cable, 75-Ohm Mini -SMB TO BNC, 72”L 396-001001-00

Front panel monitoring and status displays Rear panel includes electrical video input, analog or AES audio inputs and SFP transceiver cage

SFP Optics(Small Form-Factor Pluggable)

13

4 Channel Audio Embed into SDI or SDTI with Optical Transport

CoaxDLC150E

Audio Embedder Optical Fiber Link

SDI/SDTI Video

Coax

DLC100Optical

Reciever

SDI/SDTI with

Embedded Audio

AudioAnalog Audio

AES

4 Channel Audio Embed into SDI or SDTI with Optical Transport and Audio De-Embed

CoaxDLC150E

Audio Embedder Optical Fiber Link

SDI/SDTI Video

DLC170DAOptical

Receiver

AudioAnalog Audio

AES

SDI/SDTI Video

Analog AudioAES

Coax

Audio

Specifications




The DLC170AD converts analog video and audio to SDI (SMPTE 259M) and provides

opticaltransport.UsedwiththeDLC170DA,thedesigninsuresfullTV-1RS250-C“short

haul”analogperformanceoveratrueSMPTE259MSD-SDIopticaltransportlink.

Embed&

EDH

SFPElectrical to Optical

Analog Video

Monitor

1

Backplane 2

Backplane 3

Backplane 4

Optical Out

PowerController

Processor

Management Interface

Analog Audio D

A-D

A-D

AES Encode

Analog Audio B

A-D

A-D

AES Encode

Standby Video

Analog Audio A

Analog Audio C

VideoA-D

Keep Alive Generator

Backplane

DLC170AD Composite Video (nTSC/PAL) and Analog Audio to SDi Conversion

with Optical Transmitter

The DLC170AD uses advanced high performance 12-bit video processing with adaptive

3DcombfilterstoconvertNTSC-M/PAL-B/GanalogcompositevideotoITU-RBT.601/656

compliant, 525 or 625 line, 4:2:2 component digital video. Four channels of analog audio

areconvertedto24bitdigitalsignalsandsampledat48kHzandthenembeddedintothe

digital video per SMPTE 272M for a total of 4 analog channels. The audio can be inserted

into any one of the four groups.

Usingthebackplanetoprovidejumperfreeconnections,additionalaudiochannelgroups

can be added by cascading the DLC170AD digital output to one or more DLC150E audio

embedders. An SFP installed into the final module provides the optical output of the

combined signals.

Afrontpanelmonitorjackcanbeselectedtooutputeitheranalogordigitalvideo.When

settoanalog,theincominganalogvideocanbecheckedforsignallevelandqualityusing

conventionalanalogvideoequipment.Whensettodigital,theconvertedvideoin270

Mb/sSDIformatwithembeddedaudiocanbecheckedusingdigitalvideotestequipment.

FeaturesSingle card Composite Video and Analog Audio to SDi conversion with optical transmitter (electrical to optical)

Convert composite (nTSC/PAL) to SDi (SMPTE 259M) • Analogcomposite75-ohmvideo input BNC • AutomaticNTSC-M/PAL-B/Gformat detection• 12-bitvideocompositeto10-bit component digital processing• Advanced,adaptive3Dcombfilter • ComprehensiveVBIdatahandling• SMPTE259MSD-SDI270Mb/soutput• Automaticandmanualgainand equalization(150meters)

Convert Analog Audio to AES and Embed into SDi • Balanced 600ohm analog audio inputs (4)• SMPTE272M24-bit,48kHzaudio embedding

Use with DLC170DA for optical transport of Analog Video and Audio• ExceedsTV-1andANSIT1.502“short haul” specification

Externally Accessible SFP Transceiver Optics• Opticalbudgetto34dB

• WDM(1310nm,1550nm)

• CWDMITUG.694.2(Channels27-61)

interoperates with• OtherDL4000videomodules• DigiLink1220/2701(SDImode)• Othernon-scrambledornon-dithered SDI optical transmitters and receivers

Multiple Monitoring Options• Frontpanelmonitor(Mini75ohmSMB) selectable between: • NTSC or PAL (Pre-conversion) • SDI (Post-conversion)• FrontandrearpanelstatusLEDs


14

DLC170AD Applications

DLC

170A

D_

DS_

10-1

0-0

7

SpecificationsAnalog Video to SDi Conversion (6) Output Format SMPTE 259M via optical interfaceorbackplane Input Format SMPTE-170M NTSC-M or ITU-RBT.624-4PAL-B/G Composite VideoInput Amplitude 1.0 V p-p nominalInput Gain Range ± 3 dB (1)Input Common Mode Range ±10 VInputCommonModeRejection >30dB(0to5.5MHz)Input Impedance 75ohm or Hi-ZInput Return Loss >30 dB, 75ohm(0to5.5MHz)FreqAmplitudeResponseNTSCto4.5MHz <0.10dBNTSCto5.0MHz <0.10dBPALto4.8MHz <0.10dBPALto6.0MHz <0.10dBDifferential Gain <1.0%Differential Phase <0.7 DegreesLine Time Distortion <1.0%Chroma-Luma Gain <±2%Chroma-Luma Delay <5 nSSignal to Noise, weighted >67 dB

Analog Audio to AES and Embed (6) Channels 4(2)Input Balanced AnalogInput Impedance 600ohm or >100KohmInput Common Mode Range ±30VInputCommonModeRejection >60dBNominal (test) Level 18 dBm (3)Maximum Level (0 dBFS clipping) +10 to +24 dBm (4)Insertion Gain ±0.25 dB (5)FreqAmplitudeResponse ±0.3dB (20Hzto20kHz)THD+N(20-20k@+18dBm) 0.01%SNR (weighted) >95 dBACrosstalk@10kHz 70dBAudio to Video Lead/Lag <2 ms

(1) Automatic or manual control.(2) Specifications are with 48 kHz, 24-bit audio. (3) Nominal level is +20 dBm for 0 dBFS (clipping) with performance specifications based on a +18 dBm test level.(4) User selectable maximum (0 dBFS) level in eight 2 dB steps(5) Each end set to the same nominal 0 dBFS level.(6) Analog Specifications based on end-to-end performance with DLC170DA

EnvironmentalOperating Temperature 0 to 50°C of DL4000 ChassisAmbient Storage Temperature -40 to 80°CRelative Humidity 10 to 95% (non-condensing)Power Dissipation 10W

PhysicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis


Regulatory ConformanceCompliance: NEBS Level 3, CSA 60950, EN60950, EN55022 FCC Part 15 (Class A), CISPR 22


DLC 170AD Function Module


DLC170AD Analog to SDI Conversion with 390-008070-00 Optical Transport

SFP Optics


DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00

Monitor Cable

Model Description Part#

DL100MC-72 Monitor Cable, 75-ohm Mini -SMB 396-001001-00 to BNC, 72”L


Front panel monitoring and status displays SFP Optics(Small Form-Factor Pluggable)

Real panel includes electrical video input, analog or AES audio inputs and SFP transceiver cage

15

Composite Video (nTSC/PAL) and Analog Optical Transport Composite Video (nTSC/PAL) and Analog Audio to SDi Conversion with Optical Transport

CoaxDLC170AD

Analog to SDIConversion Optical Fiber Link

NTSC or PAL Video

DLC100Optical

Receiver

Audio4 pairs

Analog AudioCoax

SDI-SDIDLC170AD


DLC170DAReceiver

SDI to Analog Conversion

Coax

Audio

NTSC or PAL Video

4 pairs Analog Audio

NTSC or PAL Video

4 pairs Analog Audio

Coax

Audio



DLC170DA SDi to Composite Video (nTSC/PAL) Analog Audio Conversion

with Optical Receiver/RepeaterDL4000 ViDEO TRAnSPORT SySTEM

The DLC170DA converts optically received SDI to Composite Analog Video (NTSC or

PAL)andAnalogorAESAudio.UsedwiththeDLC170AD,thedesigninsuresfullTV-1

RS250-C“shorthaul”analogperformanceoveratrueSMPTE259MSD-SDIoptical

transportlink.Additionallyitcanbeusedasanopticalreceiverforalldigitalsignals

from19.39ATSCto1.485Gb/sHD-SDImakingtheDLC170DAidealfortheeventual

conversion from Analog to Digital Video Transport.


Monitor

Backplane 1

Optical Out

SFPOptical to Electrical

Optical In

PowerController

ProcessorManagement

Interface

Video Out

D -A

D-A

AES Decode Analog Audio B

Analog Audio AAES -3 # 1 (bal)

D -A

D -A

AES Decode Analog Audio D

Analog Audio CAES -3 #2 (bal)

EDH&

De-Embed

VideoD -A

Backplane 2Backplane 3Backplane 4

Backplane 1Backplane 2Backplane 3Backplane 4

Theinnovativemoduleusesadvancedvideoandaudioprocessingforexceptionalquality

conversion of SDI (SMPTE 259M) to Composite Video and Analog Audio. It accepts a 270

Mb/s525/625lineSDIinputfromeithertheopticalSFPreceiverorthebackplanethen

converts it to Composite Analog and Audio signals.

Thereceivedopticalsignalcanbedirectedtothebackplaneforadditionalchannelgroupsto

be processed by other cards in the DL4000 chassis. Audio embedded per SMPTE 272M levels

A, B, and C can be extracted as either four balanced analog audio channels or two stereo AES

digital audio streams.

A front panel video monitor with analog or digital selector switch allows the incoming digital

(with embedded audio) or composite analog output to be monitored using conventional

digital/analogvideoequipment.

FeaturesSingle card SDi to Composite Video and Analog Audio Conversion with optical receiver/repeater

Convert SDi (SMPTE 259M) to Composite Video• NTSCorPAL• AnalogComposite75-ohm video output BNC • 10-bitComponentDigital525/625line to NTSC-M or PAL-B/G conversion• Composite12-bitprocessing

Convert SDi to Analog or AES Audio• SMPTE272M-ABCaudiode-embedding with 24-bit audio conversion• Balancedanalogaudiooutputs(4)• BalancedAESaudiooutputs(2)

Optical Transport of:• AnalogVideoandAudio • 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Artel 270

Optical to Optical Repeater

Externally Accessible SFP Transceiver Optics• Opticalbudgetto34dB• WDM(1310nm,1550nm)• CWDMITUG.694.2(Channels27-61)

interoperation with• OtherDL4000videomodules• DigiLink1220/2701• Othernon-scrambledornon-dithered SDI optical transmitters and receivers

Multiple Monitoring Options• Frontpanelmonitor(mini75ohmSMB) selectable between: • NTSC or PAL (Post-conversion) • SDI (Pre-conversion)• FrontandrearpanelstatusLEDs


16

DLC170DA Applications

DLC

170D

A_

DS_

10-1

0-0

7

SpecificationsSDi-to-Analog Video Conversion (6) Output Format SMPTE-170M NTSC-M orITU-RBT.624-4PAL-B/G Composite VideoOutput Amplitude 1 V p-p nominalOutput Impedance 75ohmOutputReturnLoss(0to5.5MHz) >30dB,75ohmFreqAmplitudeResponseNTSCto4.5MHz <0.10dBNTSCto5.0MHz <0.10dBPALto5.5MHz <0.10dBPALto6.0MHz <0.10dBDifferential Gain <1.0%Differential Phase <0.7 DegreesLine Time Distortion <1.0%Chroma-Luma Gain <±2%Chroma-Luma Delay <5nsSignal to Noise, weighted >67 dB

SDi Audio-to-Analog Audio Conversion (6) Output Signal Balanced Analog (1)Output Impedance < 50ohm (2)Nominal (test) Level 18 dBm (3)Maximum Level (clip) +10 to +24 dBm (4)Insertion Gain ±0.25 dB (5)FreqAmplitudeResponse ±0.3dB(20Hzto20kHz)THD+N(20-20k@+18dBm) 0.01%SNR (weighted) >95 dBACrosstalk@10kHz 70dBAudio to Video Lead/Lag <2 ms

(1) Specifications are with 48 kHz, 24-bit audio (2) Designed to drive 600ohm loads (3) Nominal level is +20 dBm for 0 dBFS (clipping) with performance specifications based on a +18 dBm test level.(4) User selectable maximum (0 dBFS) level in eight 2 dB steps(5) Each end set to the same nominal 0 dBFS level. (6) Analog specifications based on end-to-end performance with DLC170AD

SDi-Mode Input/Output Bit Rate 270.000 Mb/s ±100ppmBER 10-13@270 Mb/sOutputJitter <500psI/O Connectors BNC Female / 75ohmI/O Levels Conforms to SMPTE 259M

(1) Specifications are with 48 kHz, 24-bit audio SMPTE 272M-C Embedded Audio

AES Audio Output Output Signal Balanced Digital (1)Output Format AES3-2003 CompliantOutput Impedance 110ohm

EnvironmentalAmbient Operating Temperature 0 to 50°C of DL4000 ChassisAmbient Storage Temperature -40 to 80°CRelative Humidity 10 to 95% (non-condensing)Power Dissipation 10W



Regulatory Conformance

Compliance: NEBS Level 3, CSA 60950, EN60950, EN55022 FCC Part 15 (Class A), CISPR 22

Ordering informationDLC 170DA Function Module


DLC170DA SDI to Analog Conversion 390-008080-00 and Optical Transport

SFP Optics


DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00

Monitor Cable


DL100MC-72 Monitor Cable, 75-ohm 396-001001-00 Mini-SMB TO BNC, 72”L



Front panel monitoring and status displays Rear panel includes electrical digital or analog video output, analog or AES audio outputs and SFP transceiver cage

17

CoaxDLC170AD


NTSC or PAL Video

DLC170DASDI to Analog

Conversion

Audio4 pairs

Analog Audio

CoaxNTSC or PAL

Video

Audio4 pairs

Analog Audio

Composite Video (nTSC/PAL) and Analog Audio Optical Transport SDi to Composite Video (nTSC/PAL) and Analog Audio with Optical Transport

CoaxDLC100Optical

Transmitter Optical Fiber Link

NTSC or PAL VideoDLC170DA

SDI to AnalogConversion 4 pairs

Analog Audio

CoaxSD-SDI

Audio



ManagementInterface

ProcessorPower

Controller

SFP ( X)(RX) EthernetT Optical

(RX)(TX)Ethernet

EthernetController

PHY

SFPOptical (RX)

Ehernet (TX)

Features

Single Card Optical Ethernet Transceiver• ElectricaltoOptical• OpticaltoElectrical• OpticaltoOptical

Transport• 10Base-T• 100Base-TX• 1000Base-T• EthernetStandard

Supports Ethernet Standards• 803.2• 802.3u• 802.3ab• 802.3z(fiberinterface)

Full Featured• 10/100/1000AutoNegotiate

• AutoMDI/MDI-X

• Autofull-duplexandhalf-duplex

• Ratelockoutviaonboardswitchor management module

• ManagementModulemonitoring and configuration

• Equalizationfor100mCat5 UTP@1000Mb/s


• DWDMITUG.694.1(Channels21-60)

Front and rear panel status LEDs• Major/Minoralarms• Linkstatus• Activity• Rate

Multiple Monitoring Options• FrontpanelmonitoringandstatusLED


10/100/1000Mb/s Ethernet Optical Transceiver/Repeater

The DLC200 is a flexible fiber optic Ethernet transceiver module for all Ethernet

rates including Gig-E. The DLC200 features industry-standard SFP optics to

provide 1310nm, 1550nm, CWDM, and DWDM optical transport with optical

budgets up to 34dBm.


DLC200

The DLC200 provides for optical transport of 10Mb/s, 100Mb/s and 1000Mb/s Ethernet.

A fully featured Ethernet Optical transceiver, the DLC200 has two externally accessible

SFPsandoneUTP(RJ45port).ItcanbedeployedasUTP-to-optical,asoptical-to-UTP,

or as an optical-to-optical (optical repeat/regenerate). A single piece rugged module,

takingoneslotintheDL4000chassis,itincludesfrontpanelLEDsforvisualmonitoring

of status and on-board switches for configuration. Externally accessible industry stan-

dardSFPopticsallowforrapid,toolfreeandflexibledeploymentintoopticalnetworks.

18

DLC200 Applications

DLC

200

_D

S_10

-10

-07

SpecificationsEnvironmentOperating Temperature 0 to 50°C of DL4000 Chassis Ambient Storage -40 to 80°C TemperatureRelative Humidity 10 to 95% (non-condensing)Power Dissipation 6W

Physical

Dimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis


Electrical interfaceConnector RJ45Data Rates 10Mb/s 100Mb/s 1000Mb/s




DLC200 10/100/1000Mb/s Ethernet 390-008100-00 Optical Transceiver

SFP Optics


DLS31VX-11 Video SFP 1310nm 393-021310-11 Transceiver 11dBDLS31VX-30 Video SFP 1310nm 393-021310-00 Transceiver 30dB DLS55VX-30 Video SFP 1550nm 393-021550-00 Transceiver 30dBDLSCxxVX-30 Video SFP CWDM nm 393-041xx1-00 Transceiver 30dB

DLSWxxHX-33 2.5Gb/s SFP DWDM 393-240033-xx Transceiver 33dB


Front panel monitoring and status displays Rear panel includes RJ45 ethernet connector and dual SFP transceiver cages


19

10/100/1000Ethernet

DLC200Ethernet Optical

Transceiver Optical Fiber Link


Transceiver

10/100/1000Ethernet RJ45 RJ45

10/100/1000 Ethernet Optical Transport

10/100/1000Ethernet


Transceiver


Transceiver


TransceiverRJ45 RJ45

Optical Fiber Link Optical Fiber Link

10/100/1000Ethernet

10/100/1000 Ethernet Optical Transport with Repeater

DLM130DL-Manager EMS

withPower Supply


Transceiver


Transceiver

RemoteHTTP and/or SNMP

Monitoring andManagementOptical Fiber Link

RJ45 RJ45

Remote Monitoring and Management of DL4000 Chassis with DLM130



The Composite Analog to SDI conversion is performed using the same feature set as the DLC170AD.

TheDLC270performsahighquality,featurerichformatconversionwithaudioembedding,and

includesafrontpanelmonitorjackselectabletoeithertheanaloginputortheconvertedSDIsignal.When

usedinconjunctionwithaDLC170DA,thedesigninsuresfullTV-1RS250-C“shorthaul”analogperformance

overatrueSMPTE259MSD-SDIopticaltransportlink.

Foropticaltransport,theDLC270includescapabilitiestotransmitbroadcastqualityjitterfreeHD-SDI(SMPTE

292M),SD-SDI(SMPTE259M-C),DVB-ASI,ATSCsignalsaswellasallother270Mb/sbasedtransportformats.Used

inconjunctionwiththeDLC170DA,migratingfromCompositeAnalogtoanydigitalformatispossiblewithout

replacinganyequipment.Indigitalmode,theDLC270iscompatiblewiththeDLC100,DLC300andothernon

scrambled or dithered optical receivers.

Optical transmission is performed using externally accessible SFP optics in 1310nm, 1550nm, CWDM wavelengths.

Provisioningandmonitoringisaccomplishedusingswitches,frontandbackpanelLEDsandBNCs.DL-Manager,

an SNMP or HTTP remote provision and management tool is also embedded in the module. Cost effective, flex-

ible,andreliable,theDLC270continuesArtel’straditionofmakingtheworld’smostinnovativeandreliablevideo

over fiber optics transport hardware.

FeaturesComposite Video and Analog Audio to SDi conversion with optical transmitter for all digital services (electrical to optical)

Convert composite (nTSC/PAL) to SDi (SMPTE 259M)• Analogcomposite75-ohmvideoinputBNC• Automatic NTSC-M / PAL-B/G format detection• 12-bitvideocompositeto10-bitcomponent digital processing• Advanced,adaptive3Dcombfilter• ComprehensiveVBIdatahandling• SMPTE259MSD-SDI270Mb/soutput• Automaticandmanualgainandequalization (150 meters)

Convert Analog Audio to AES and Embed into SDi• Balanced600ohmanalogaudioinputs(4)• SMPTE272M24-bit,48kHzaudioembedding

Use with DLC170DA for optical transport of Analog Video and Audio• ExceedsTV-1andANSIT1.502“shorthaul” specification

Optical transmitter for all Digital Video formats (electrical to optical)• 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Artel 270• 19.39Mb/sATSC(SMPTE310M)



Composite Video (nTSC/PAL) and Analog Audio to SDi Conversion with Multi-rate Digital Video Optical Transmitter

The DLC270 converts Composite Video and Audio to SDI (SMPTE 259M) and includes and

optical transmitter. When used with the DLC170DA, the design insures full TV-1 RS250-C

“shorthaul”analogperformanceoveratrueSMPTE259MSD-SDIopticaltransportlink.Inad-

dition the DLC270 is a optical transmitter for HD-SDI, SD-SDI, DVB-ASI and SDTI. Combining

Analog to Digital Video conversion and standards based optical transmitter into one module

provides the ultimate flexibility for moving from Analog today to Digital tomorrow.


DLC270

20

AudioEmbed& EDH


Analog Video

Analog Monitor

1

Backplane 2

Backplane 3

Backplane 4

Optical Out

PowerController

Processor

Management Interface

Analog Audio D

A-D

A-D

AES Encode

Analog Audio B

A-D

A-D

AES Encode

Standby Video

Analog Audio A

Analog Audio C

Level &EQ Adj

Keep Alive Generator

Backplane

Digital Video EQ

VideoA-D

BNC TX Out

Digital Monitor

DLC270 Applications

DLC

270

_D

S_10

-10

-27

Monitor CableModel Description Part #DL100MC-72 Monitor Cable, Mini 75ohm 396-001001-00 SMB to BNC, 72”L

Analog Video to SDi Conversion (6) Output Format SMPTE 259M via optical interfaceorbackplane Input Format SMPTE-170M NTSC-M or ITU-RBT.624-4PAL-B/G Composite VideoInput Amplitude 1.0 V p-p nominalInput Gain Range ± 3 dB (1)Input Common Mode Range ±10 VInputCommonModeRejection >30dB(0to5.5MHz)Input Impedance 75ohm or Hi-ZInput Return Loss >30 dB, 75ohm(0to5.5MHz)FreqAmplitudeResponseNTSCto4.5MHz <0.10dBNTSCto5.0MHz <0.10dBPALto4.8MHz <0.10dBPALto6.0MHz <0.10dBDifferential Gain <1.0%Differential Phase <0.7 DegreesLine Time Distortion <1.0%Chroma-Luma Gain <±2%Chroma-Luma Delay <5 nSSignal to Noise, weighted >67 dB

Analog Audio to AES and Embed (6) Channels 4(2)Input Balanced AnalogInput Impedance 600ohm or >100KohmInput Common Mode Range ±30VInputCommonModeRejection >60dBNominal (test) Level 18 dBm (3)Maximum Level (0 dBFS clipping) +10 to +24 dBm (4)Insertion Gain ±0.25 dB (5)FreqAmplitudeResponse ±0.3dB (20Hzto20kHz)THD+N(20-20k@+18dBm) 0.01%SNR (weighted) >95 dBACrosstalk@10kHz 70dBAudio to Video Lead/Lag <2 ms

(1) Automatic or manual control.(2) Specifications are with 48 kHz, 24-bit audio. (3) Nominal level is +20 dBm for 0 dBFS (clipping) with performance specifications based on a +18 dBm test level.(4) User selectable maximum (0 dBFS) level in eight 2 dB steps(5) Each end set to the same nominal 0 dBFS level.(6) Analog Specifications based on end-to-end performance with DLC270

21

SFP Optics (Small Form-Factor Pluggable) Rear panel includes electrical digital and analog video inputs, analog or AES audio inputs, electrical output and SFP transceiver cage

Front panel monitoring and status displays

NTSC or PAL Video

4 Pairs Analog Audio

DLC270Analog to SDI

Conversion

Coax

AudioOptical Fiber LInk

Coax

Audio

NTSC or PAL Video


DLC170DASDI to Analog

Conversion

Composite Video (nTSC/PAL) and Analog Audio Optical Transport

SpecificationsEnvironmentalAmbient Storage Temperature -40 to 80°C Ambient Operating Temperature 0 to 50°C of DL4000 Chassis Relative Humidity 10 to 95% (non-condensing)Power Dissipation 16W

PhysicalDimensions 1.4” x 5" x 10.8" 2 slots in DL4000 chassis CanonlybeusedwithDL4000;requires functionalityofDL4000backplane


Electrical interface (Digital)

Signal Formats •1.485Gb/sHD-SDI(SMPTE292M) •DVB-ASI • SD-SDI(SMPTE259M-C,ITU656) •ARTEL270 • SDTI(SMPTE305M) •19.39Mb/sATSC(SMPTE310M)

Signal Polarity Non Inverting Channels 1-transmit Connectors Input (1) BNC 75ohm Loop Through (1) BNC 75ohm Monitor (2) Mini 75ohm SMB ReturnLoss >15dB,5-1485MHz CableEqualizationforBelden 0to350meters(270Mb/s) 1694A type cable: 0 to 140 meters (1485 Mb/s)


Ordering informationDLC270 Function ModuleModel Description Part #DLC270 Multi-rate Digital Transmitter with 390-008075-00 Composite Video and Analog Audio

SFP OpticsModel Description Part #DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00 DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00 DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00

Coax

Audio

NTSC or PAL Video


DLC270Analog to SDI

Conversion Optical Fiber LInkDLC100

Optical ReceiverCoax SD-SDI

Composite Video (nTSC/PAL) and Analog Audio to SDi with Optical Transport

Digital Video Optical Transport

HD-SDISD-SDI

DVB-ASICoax

DLC270Digital Video

Optical Transmitter Optical Fiber LinkCoax

HD-SDISD-SDI

DVB-ASI

DLC100Digital Video

Optical Receiver




Backplane #1

Backplane #2

Backplane #3

Backplane #4

Backplane #1

Backplane #2

Backplane #3

Backplane #4

TDMMUX

Video Monitor(MON)

High SpeedOptical Stream(TX)

Digital VideoChannel A

Digital VideoChannel B

Digital VideoChannel C

Digital VideoChannel D


A

B

C

D

SFPOptical

to Electrical

Optical In(RX)

ManagementInterface

ProcessorPower

Controller

ManagementInterface

ProcessorPower

Controller

TDMDEMUX


Digital Video 1

Digital Video 2

Digital Video 3

Digital Video 4

Backplane #1

Backplane #2

Backplane #3

Backplane #4

Video Monitor(MON)

SFPOptical

to Electrical

B

C

D

A

High SpeedOptical Stream

(RX)

High SpeedOptical Stream(TX)

ManagementInterface

ProcessorPower

Controller

ManagementInterface

ProcessorPower

Controller

270Mb/s Digital Video 4-to-1 TDM Multiplexer with Optical Transmitter/Receiver/Repeater

TheDLC274utilizesTimeDivisionMultiplexing(TDM)tocombinefourindepen-

dent 270Mb/s video signals into one optical channel. This enables transport of

upto160270Mb/sserviceoverasinglefibermakingitidealforconservingboth

fiberandrackspace.

The DLC274M and DLC274D provide a space efficient and cost effective method of

transporting up to four 270Mb/s digital video services over a single optical wavelength.

Services can be any combination of 270Mb/s video signals including SDI, SDTI, and

DVB-ASI. Optical regeneration or repeating is accomplished using the DLC274D which

includes drop and continue capabilities, the DLC100, DLC300 or any other system

capableorrepeatinga1.485Gb/ssignal.Usingindustrystandard1310nm,1550nm,

CWDM, or DWDM Small Form-Factor Pluggable (SFP) optics the DLC274 enables

transport of up to 160 270Mb/s circuits over a single fiber.

FeaturesSingle Slot Card SetTransport four 270Mb/s video circuits on a single optical wavelength• Supportanycombinationof: • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Other 270Mb/s services• UsewithDLC170forCompositeAnalog Transport

• FullreclockingremovesjitterfromSDI

industry Standard 1.485Mb/s output

Space Efficient• UtilizesoneslotintheDL4000Video • Transportsupto16videocircuits perrackunit

Externally Accessible SFP Transceiver Optics• Opticalbudgetto34dB• WDM(1310nm,1550nm)• CWDMITUG.694.2(Channels27-61)• DWDMITUG.694.1(Channels21-60)

Multiple Monitoring Options• Switchselectablefrontpanelmonitor of individual channels (Mini 75ohm SMB)• FrontandrearpanelstatusLEDs • Loss of video (individual channels) • Loss of optical input

• Laser (SFP) fail


DLC274

DLC274M DLC274D

22

DLC274 Applications

SpecificationsEnvironmentalOperating Temperature of 0 to 50°C DL4000 Chassis Ambient Storage Temp -40 to 80°C Relative Humidity 10 to 95% (non-condensing)Power Dissipation <10 watts



Electrical interface270Mb/s Signal Formats -SD-SDI(SMPTE259M-C,ITU656) - SDTI (SMPTE 305M) - DVB-ASI - Others 270Mb/s services (+100ppm)

Signal Polarity Non Inverting

Channels 4 Connectors Input (4) BNC 75ohm (DLC274M) Output (4) BNC 75ohm (DLC274D) Monitor Mini 75ohm SMB ReturnLoss >15dB,5-270MHz


Ordering informationModel Description Part #DLC274M 270Mb/s SDI/ASI Video 4-to-1 390-008020-00

TDM Multiplexer

DLC274D 270Mb/s SDI/ASI Video 1-to-4 390-008030-00

TDM De-multiplexer

SFP Optics


DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00 DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00 DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00 DLSWxxHX-33 2.5Gb/s SFP DWDM Transceiver 33dB 393-240033-xx

Monitor Cable


DL100MC-72 Monitor Cable, 396-001001-00

Mini 75ohm SMB to BNC, 72”L


Rear panel includes four BNC electrical connections and SFP transceiver cage

Front panel monitoring and status displays SFP Optics (Small Form-Factor Pluggable)

23

DLC274MMultiplexer with

Optical Transmitter Optical Fiber Link

DLC274DDe-Multiplexer

with Optical Receiver

SD-SDI, SDTI, DVB-ASISD-SDI, SDTI, DVB-ASISD-SDI, SDTI, DVB-ASISD-SDI, SDTI, DVB-ASI


CoaxCoaxCoaxCoax

CoaxCoaxCoaxCoax

Four Channel Digital 270Mb Video Optical Transport

Four Channel Digital 270Mb Video Optical Transport with Repeater


CoaxCoaxCoaxCoax


Optical Transmitter

DLC274DDe-Multiplexer and

Optical Repeater

DLC274DDe-Multiplexer

with Optical Receiver



Coax Coax Coax Coax

Optical Fiber LinkOptical Fiber Link

CoaxCoaxCoaxCoax


Optical Transmitter Optical Fiber Link

DLC100Optical Repeater


CoaxCoaxCoaxCoax


CoaxCoaxCoaxCoax

DLC274DDe-Multiplexer with

Optical ReceiverOptical Fiber Link

Four Channel Digital 270Mb Video Optical Transport with Drop and Continue

DLC

274

_D

S_10

-10

-07




The DLC300 incorporates numerous features in a flexible, easy to deploy and

configuremodulewithunparalleledqualityandreliability.Themoduleoptically

transports all digital formats from 19.39Mb/s ATSC to 3G-SDI (SMPTE 424M). To

minimizeinventorycostsandsimplifydeployment,itcanbeconfiguredasareceiver,

transmitter or repeater. For route diversity and optical flexibility the DLC300 also

features dual optical SFP modules available in WDM, CWDM, or DWDM optical wave-

lengths.Totransportacrossmetroopticalamplifiednetworks,ditheringofallSDI

formats have been included as well as conversion from SMPTE 310M to DVB-ASI. Cost

effective,flexible,andreliable,theDLC300continuesArtel’straditionofmakingthe

world’s most innovative and reliable video over optical transport hardware.

Features

Single Card Configurable as:• Transmit(electricaltooptical)• Receive(opticaltoelectrical)• Repeater(opticaltooptical)

Automatic Rate Selection of All Digital Video Formats• 2.967Gb/s3G-SDI(SMPTE424M)• 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s - SD-SDI(SMPTE259M-C,ITU656) - SDTI (SMPTE 305M) - DVB-ASI - Artel 270• 19.39Mb/sATSC(SMPTE310M)

Dual SFPs for Route Diversity• OperateswithoneortwoSFPs• SeparatefaultalarmsforeachSFP• ReceiveviaprimaryorsecondarySFP• Automaticswitchoveruponlossofsignal• UserselectablereversiontoprimarySFP

Optional Dithering of all SDi formats• DitheringperSMPTEEG-34

Convert ATSC to DVB-ASi • Transmitteronly

interoperates with• DigiLink1220/2701• OtherDL4000Modules• ITU694.1or694.2OpticalMultiplexers

Flexible Multi-purpose repeater for:DLC100, DLC150E, DLC170, DLC274, DV6000, DL1220, DL2701

non-Video standby signal on loss of video inputVideo test or standby signal generator for SDi formats

Externally Accessible SFP Transceiver Optics• Opticalbudgetto34dB• WDM(1310nm,1550nm)• CWDMITUG.694.2(Channels27-61)• DWDMITUG.694.1(Channels21-60)

inputs/Outputs• OpticalviaSFPs• Electricalvia75ohmBNC• Inputfromandoutputtoothermodules inDL4000Chassis(viabackplane)

Multiple Monitoring Options• Frontpanelmonitoringoftransported signal• FrontandrearpanelstatusLEDs


The DLC300 is a flexible fiber optic transport module for all digital video formats

from 19.39Mb/s (ATSC) to 2.97Gb/s (3G-SDI). The DLC300 is a single module, user

configurable to function as a Transmitter, Receiver, or Repeater and supports

route diversity as well as ATSC to DVB-ASI conversion.

DLC300





StandbyVideo

Non-videoStandby

Dither

SMPTE to ASI

PowerController Processor

SignalClassification

andReclocking

1

Backplane 2

Backplane 3Backplane 4

Backplane

Digital Video In

Optical in 1

Optical in 2


Digital Video Output

Monitor

Optical Out 1

Optical Out 2

ManagementInterface

3G-SDi Multi-Rate Digital Video Optical Transmitter/Receiver/Repeater

24

DLC300 Applications

SpecificationsEnvironmentalOperating Temperature of 0 to 50°C DL4000 ChassisAmbient Storage -40 to 80°CTemperatureRelative Humidity 10 to 95% (non-condensing)Power Dissipation 8.4W with one SFP


Electrical interfaceSignal Formats2.967Gb/s 3G-SDI (SMPTE 424M)1.485Gb/s HD-SDI (SMPTE 292M)270Mb/s SD-SDI(SMPTE259M-C,ITU656) SDTI (SMPTE 305M) DVB-ASI ARTEL 27019.39Mb/s ATSC (SMPTE 310M))Signal Polarity Non InvertingChannels 1-transmit, receive or repeatConnectors Input (1) BNC 75ohm Output (1) BNC 75ohm Monitor Mini 75ohm SMBReturnLoss(Input,Output,Monitor) >15dB,5-1485MHz >10dB,1486-2967MHzCableEqualizationforBelden1694A 0to350meters(270Mb/s) 0 to 140 meters (1.485 Gb/s)

0 to 120 meters (2.967 Gb/s)

DLC

300

_D

S_10

-10

-07

Front panel monitoring and status displays Rear panel Includes electrical input or output and dual SFP transceiver cage

Optical Protection ModesTransmit Transmit same signal on each SFPReceive PrimaryandsecondarySFPsockets Automatic switchover upon loss of signal UserselectablereversiontoprimarySFP

SDi test or standby signal formatsSD-SDI 525i/29.97 625i/25 HD-SDI 1080i/29.97 1080i/25 3G-SDI 1080P/29.97 1080p/25

SDi signal processing (3G –SDi HD-SDi and SD-SDi)Optional LSB Dithering per SMPTE EG-34


Regulatory ConformanceCompliance: NEBS Level 3, CSA 60950, EN60950, EN55022 FCC Part 15 (Class A), CISPR 22

Ordering informationDLC300 3G-SDI Multi-rate Digital Video Transmitter/Receiver/Repeater


DLC300 3G-SDI Multi-Rate Digital Video 390-008120-00 Transmitter/Receiver/Repeater

SFP Optics

DLS31VX-11 Video SFP 1310nm Transceiver 11dB 393-021310-11DLS31VX-30 Video SFP 1310nm Transceiver 30dB 393-021310-00DLS31VX3G-11 Video SFP 1310nm 3G Transceiver 11dB 393-051310-11DLS55VX-30 Video SFP 1550nm Transceiver 30dB 393-021550-00DLSCxxVX-30 Video SFP CWDM Transceiver 30dB 393-041xx1-00DLSWxxHX-33 Video SFP DWDM Transceiver 33dB 393-240033-xx

Accessories

DL100MC-72 Monitor Cable, 75-ohm Mini-SMB 396-001001-00 to BNC, 72”L



Single Channel Digital Video Optical Transport

3G-SDI, HD-SDI,SD-SDI, DVB-ASI

ATSC

DLC300Optical

Transmitter

DLC300Optical

ReceiverCoax Coax

Primary Optical Fiber Link

Secondary Optical Fiber Link


ATSC


ATSC

DLC300Optical

Transmitter

DLC300Optical

RepeaterCoax

Optical Fiber Link Optical Fiber Link

DLC300Optical

ReceiverCoax


ATSC

Single Channel Digital Video Optical Transport with Repeater ATSC to DVB-ASi Conversion with Optical Transport

ATSCSMPTE 310M Coax

DLC300ATSC to ASI

Conversion andOptical Transmitter

Optical Fiber Link

DLC300Optical

ReceiverCoax DVB-ASI

3G-SDI, HD-SDI,SD-SDI, DVB-ASI,

ATSC

DLC300Optical

Transmitter Optical Fiber LInkCoax Coax

DLC300Optical

Receiver

3G-SDI, HD-SDI,SD-SDI, DVB-ASI,

ATSC

Single Channel Digital Video Optical Transport with Optical Failover

25




RTPEncap

Digital Video In A FECEncode

UDPIP

Encap Optical OutSFP

Electricalto OpticalEthernet

MAC

ProcessorHot Swap Controller

& Power

Digital Video In B

RTPDecap

Digital Video Out A FECDecode

UDPIP

DecapDigital Video Out B

Optical InSFP

Optical toElectrical

Video Monitor

DLC410

Based on SMPTE 2022 standards for encapsulation and forward error correction (FEC) the

DLC410enablesSDIandASItobereliablytransportedacrossmanagedIPnetworks.Two

independent video channels in each direction can be transported over a single Gig-E

connection. SDI video is transported in its entirety, including all ancillary data. ASI video

streams from less than 20Mb/s to over 200Mb/s are supported and can be rate limited.

TheDLC410FECenablestherecoveryoflost,erroredordelayedIPpacketsandcanwith-

standburstoutagesinexcessof3mS.AccesstotheIPnetworkisthroughrearaccessible

field replaceable SFPs either optically in WDM, CWDM , and DWDM wavelengths or

electricallyviaanRJ-45SFP.

DVB-ASi and SD-SDi Video Over iP Gateway

Features Single Module transceiver for SD-SDi and DVB-ASi over Gig-E• FullytransparentcarriageofSDI and SDTI• IncludesallSDIandSDTI ancillary information• DVB-ASIstreamratesfrom <20 Mb/s to >200 Mb/s•Supports188-byteand204-byte DVB-ASIpackets• Provisionablelimitsonbandwidth for DVB-ASI

Four independent channels: two transmit, two receive

Unicast or multicast iP video streams

Standards based Encapsulation and Forward Error Correction (FEC)• DVB-ASI • SMPTE 2022-2 Encapsulation • SMPTE 2022-1 FEC• SDI • SMPTE 2022-6 Encapsulation • SMPTE 2022-5 FEC•FECrecoverslost,errored, ordelayedpackets• Withstandsburstoutagesinexcess of 3 mS• RowandcolumnFECsupported

Externally Accessible SFP Transceivers• Opticalbudgetto34dB• WDM(1310nm,1550nm)• CWDMITUG.694.2(Channels27-61)• DWDMITUG.694.1(Channels21-60)• ElectricaltoRJ-45Ethernet

Front panel monitoring of active video signals


The DLC410 greatly expands the DL4000 platform capabilities to include SMPTE stan-

dards based Video over IP transport for both DVB-ASI and SD-SDI formats. The module

is capable of transporting 4 channels (2 in each direction) of DVB-ASI or SD-SDI over a

GigabitEthernetIPnetworkconnection.

26

Rear panel includes 2 input and 2 output BNCs plus SFP cage

DLC410 Applications

DLC

410

_D

S_10

-10

-07

Specificationsnetwork interface - OpticalType Ethernet SFP Optical Connectors LCFormat 1000Base-LX, 1000Base-ZX

network interface - ElectricalType Ethernet SFPConnector RJ-45Data Rate 1000Mb/sFormat 1000Base-T

Video interfaceFormats SD-SDI (SMPTE 259M) SDTI (SMPTE 305M) DVB-ASIChannels 2 Input and 2 Output

Electrical interfaceInput (2) BNC 75ohmOutput (2) BNC 75ohmMonitor (Front) Mini 75ohm SMBReturnLoss >15dB,5-270MHzCableEqualizationfor 0to350meters(270Mb/s) Belden 1694A type cable

EnvironmentalOperating Temperature of DL4000 Chassis 0 to 50°CAmbient Storage Temperature -40 to 80°CRelative Humidity (non-condensing) 10 to 95% Power Dissipation 10W

PhysicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 based chassis


Ordering informationDLC410 DVB-ASI and SD-SDI Video Over IP Gateway


DLC410 DVB-ASI and SD-SDI Video 390-008410-00 Over IP Gateway

SFP Options*


DLS31EX-11 SFP 1.25 Gbps 1310nm Transceiver 11dB 393-001310-11 DLS31EX-18 SFP 1.25 Gbps 1310nm Transceiver 18dB 393-001310-18 DLS31EX-24 SFP 1.25 Gbps 1550nm Transceiver 24dB 393-001550-24 DLSE45 SFP1.25GbpsCopperRJ45Cat5eSFP,100m 393-000100-00

*Also compatible with all Artel Video SFPs.

Accessories


DL100MC-72 Monitor Cable, Mini 75ohm SMB 396-001001-00 to BNC, 72”L


Front panel monitoring and status displays

27

MultiCast SD-SDI or DVB-ASI Over Ethernet Network

Circuit 1 TransmitCircuit 2 Transmit

Circuit 1 ReceiveCircuit 2 ReceiveDLC410 DLC410Traffic Engineered

Ethernet Network

Opticalor

ElectricalLink

Opticalor

ElectricalLink

Coax

Coax

Coax

Coax

Opticalor

ElectricalLink

Circuit 1 ReceiveCircuit 2 Receive

Coax

Coax

DLC410

Rate-Limited ASI Over Gig-E Ethernet

Circuit 1 Transmit 5Mb/sCircuit 2 Transmit 100Mb/s



Coax

Coax

Coax

Coax

Coax

Coax

DLC200

Ethernet Switch

DLC200

Ethernet Switch

Traffic EngineeredEthernet Network

Coax

Coax

Coax

Coax

Coax

Coax

Circuit 1 Receive 5Mb/sCircuit 2 Receive 100Mb/s



DLC410

DLC410

DLC410

DLC410

DLC410

DLC410

User defined ASI Payload from 5Mb/s to 217Mb/s

Optical

ElectricalElectrical

Optical

Dual Bi-Directional SD-SDI or DVB-ASI Over Ethernet Network

Circuit 1 TransmitCircuit 2 TransmitCircuit 3 ReceiveCircuit 4 Receive

Circuit 1 ReceiveCircuit 2 ReceiveCircuit 3 TransmitCircuit 4 Transmit

Coax

Coax

Coax

Coax

Coax

Coax

Coax

Coax

DLC410 DLC410Traffic EngineeredEthernet Network

Opticalor

ElectricalLink

Opticalor

ElectricalLink



Auniversaldigitalvideolinktestandverificationmodule,theDLT710provides complete,one-touch“go-no-go”performancetestingforallcommonvideorates andformats.Itsuniquedesignallowsforoneormoreformatstobeselectedsimulta-neouslyenablingautomaticverificationofmulti-formatvideolinks.

As a test signal generator, the DLT710 outputs a continuous video signal of a single selectedformatoratimedsequencethrougheachselectedformat.Whenconfiguredas a monitor for a single format it will continuously monitor live digital video and indicaterateandphysicallayersignalquality.Withmorethanoneformatselected themoduleautomaticallyverifieseachratehasbeenreceived.Withthisunique multi-purposemodule,verificationofamulti-servicevideolinkcanbeperformedin lessthanfiveminutes.TheDLT710isanidealsolutionforlinkverificationofdigital video circuits.

FeaturesSingle module provides generation and verification for:• 2.97Gb/s3G-SDI(SMPTE424M) • 1080p/59.94 • 1080p/50• 1.485Gb/sHD-SDI(SMPTE292M) • 1080i/59.94 • 1080i/50 • 720p/59.94 • 720p/50• 270Mb/sSD-SDI(SMPTE259M) • 525i/59.94 • 625i/50• 270Mb/sDVB-ASI• 19.39Mb/sATSC(SMPTE310M)Video Generator Functions • UserselectableRatesandFormats• SDIColorBarsorPathological Test Signals both with Audio Tone• StoredMPEGVideoStream• Automaticallysequencesthrough all selected formats • OutputtotwoBNCsandChassis BackplaneVideo Monitor Functions• TestforEDH,CRC• Automaticallydetectsinputsignal• TestsDVB-ASIandSMPTE310Transport Streams • DVB-ASIInversionDetection• Detectsandverifiesallselectedformats• InputfromBNCorchassisbackplane• Indicateslow-levelordoubleterminated inputsRemote Management via DL-Manager™• Noexternalsoftwarerequired• HTTPorSNMPv2c• Configure,monitor• Upgradefirmware• Time-stampedeventlog

Multi-Format Digital Video Generator and Test Module

Artel’sDLT710isaninnovativeDL4000basedmoduleforsimple,automaticlink

verification of serial digital video formats. The single module functions as both a

signal generator and test monitor for 3G-SDI, HD-SDI, SD-SDI, DVB-ASI and ATSC

andisidealforautomaticverificationofsingleormulti-formatvideolinks.

DLT710

Digital Video Out 2


Monitor

ManagementInterface

Configuration

Digital Video In

Backplane 1

Backplane 2

Backplane 3

Backplane 4

Test Signal Generator

Processor

Format Controland

Sequencer

SourceSelect

Test Signal CheckerFront Panel

Display

3G-SDI HD-SDI SD-SDI DVB-ASI ATSC

Digital Video Out 1

3G-SDI HD-SDI SD-SDI DVB-ASI ATSC


28

DLT

710

_D

S_10

-10

-07

DLT710 Applications

Front panel Rear panel includes electrical video and audio signal generator and checker, and format select switches

Link Under Test

Link

DLT710Generator

Transmitter Receiver DLT710CheckerCoax Coax

Video Electrical interfaceInputs 1 BNC 75 ohm (panel) Other Modules in DL4000 chassisviabackplane

Outputs 2 BNC 75 ohm (panel) 1 Mini 75 ohm SMB (Front panel) Other Modules in DL4000 chassisviabackplane

ReturnLoss(Input,Output,Monitor) >15dB5-1485MHz >10dB1486-2970MHz

CableEqualizationforBelden1694A 0to50meters

Output Amplitude 800mVP-p, ± 10%

Rise/Fall time 270 Mb/s 800ps ±400 1.485 Gb/s < 135ps 2.970 Gb/s < 135ps

GenerationFrequencyStability ±2.5ppmmaximum

OutputJitter* 270 Mb/s < 500 ps p-p 1.485 Gb/s <135 ps p-p 2.970 Gb/s <101 ps p-p

*UsingColorBars,perEG-33

EnvironmentalAmbient Storage -40 to 80°C TemperatureAmbient Operating 0 to 50°C Temperature of DL4000 Chassis Relative Humidity 10 to 95% (non-condensing)Power Dissipation 10W

PhysicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 based chassis

Regulatory ComplianceCompliance: CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22

Ordering informationDLT710 Digital Video Generator and Monitor


DLT710 Multi-Format Digital Video 390-008150-00 Generator and Monitor

DLK710 Multi-Format Digital Video 398-008150-00 Generator and Module Travel Kit

DLK710 Kit Includes:•DLT710Multi-FormatDigitalVideoGeneratorandModule• DL4100SingleSlotChassiswithexternalACPowerSupply• 16.68”x13.06”x4.37”ruggedizedtravelcase• BNCtoBNCMonitorCable(2)• BNCtoMini-SMBMonitorCable• Screwdriver

Specifications

29

Link

Customer Terminal

Equipment

Customer Terminal

EquipmentTransmitter Receiver

DLT710Checker

DLT710Checker

DLM130Logs Results

DLM130Logs Results

Coax Coax

installed Circuit Analysis with Logged Results

Circuit Verification (one or more formats)

DLT710Generator and

Checker Coax Coax

Link Under Test

LinkTransmitter Receiver

Pre-installation Equipment Verification (one or more formats)



Optical Multiplexers

1310nm

1550nm

Common

DLOW1

Common

DLOC8

1471nm

1491nm

1511nm

1531nm

1551nm

1571nm

1591nm

1611nm

Expansion Port

Expansion Port

Common

DLOD421

Common50%

50%

DLOS2

WDM SPLITTER

DWDMCWDM

21

22

23

24

DWDM, CWDM and WDM ModulesDL4000 ViDEO TRAnSPORT SySTEM

Artel’s DWDM, CWDM and WDM modules create a comprehensive set of optical

multiplexing solutions for the DL4000 Video Transport System. These modules,

inconjunctionwithotherDL4000modulesorthirdpartyequipment,allowthe

creationofflexible,spaceandfiberefficientopticalnetworks.

Artel designed its optical multiplexing products to address the issue of space and fiber

constraint.Forspaceefficiency,eachmoduletakesonlyonebayinaDL4000based

chassis.Utilizingindustrystandardopticalfiltersplusadditionalexpansionport,or

complexopticalnetworkscanbecreated.Completelypassive,anddesignedwiththe

latest optical filters, Artel’s DWDM, CWDM and WDM modules are extremely reliable,

cost effective, and feature low insertion losses.

Optical Multiplexer Features• LowOpticalLosses• Passivedesignforreliability• Bi-Directional• IndustryStandardITUwavelengths• IndustryStandardLC/PCConnectors• Mostmodulesincludeexpansionport (passes all other wavelengths) • CompatiblewithallDL4000basedchassis (including DL4000P passive 4 slot chassis)

WDM Features• 1310nmand1550nmcombiner/splitters• SingleordualWDMoptions• ExternalWDMconserveschassisslot• Splitratiosfrom50/50to1/99

CWDM Features• IndustrystandardITUG.694.2wavelengths• Opticallymultiplexupto18channelsovera single fiber• 4,8,10,and18channeloptions• Multiple4Channeloptions

DWDM Features• IndustrystandardITUG.694.1wavelengths• Opticallymultiplexupto40channelsona single fiber • 4,10,20,and40channeloptions• Interconnectmodulestoenable40 channelsinasingle1RUchassis

30

31

WDM Ordering information and Specifications | 1310nm and 1550nm

Model # Description Part # # Channels Channels Insertion Loss

Adjacent Channel Isolation Return Loss

DLOW1 Single WDM 390-008754-01 2 1310, 1550 ≤1.4dB ≥ 30dB ≥ 40dB

DLOW2 Dual WDM 390-008754-02 2 1310, 1550 “ “ “

DLOWE External WDM 390-008790-15 2 1310, 1550 “ “ “

DLO

xxx_

DS_

10-1

0-0

7

DWDM Ordering information and Specifications | Channels 21 through 60 of iTU G694.1

Model # Part # # Chans Channels Insertion Loss(±0.11 nm)

Adjacent Channel Isolation Directivity Return

Loss Uniformity Insertion Loss Upgrade Port

DLOD421 390-008762-21 4 21, 22, 23, 24 ≤ 2.4dB ≥ 25dB ≥ 50dB ≥ 40dB ≤ 1.0dB ≤ 1.9dB

DLOD425 390-008762-25 4 25, 26, 27, 28 “ “ “ “ “ “

DLOD429 390-008762-29 4 29, 30, 31, 32 “ “ “ “ “ “

DLOD433 390-008762-33 4 33, 34, 35, 36 “ “ “ “ “ “

DLOD437 390-008762-37 4 37, 38, 39, 40 “ “ “ “ “ “

DLOD441 390-008762-41 4 41, 42, 43, 44 “ “ “ “ “ “

DLOD445 390-008762-45 4 45, 46, 47, 48 “ “ “ “ “ “

DLOD449 390-008762-49 4 49, 50, 51, 52 “ “ “ “ “ “

DLOD453 390-008762-53 4 53, 54, 55, 56 “ “ “ “ “ “

DLOD457 390-008762-57 4 57, 58, 59, 60 “ “ “ “ “ “

DLOD1021 390-008-765-21 10 21-30@100GHz ≤ 4.1dB “ “ “ “ ≤ 4.1dB

DLOD1031 390-008765-31 10 31-40@100GHz “ “ “ “ “ “

DLOD1041 390-008765-41 10 41-50@100GHz “ “ “ “ “ “

DLOD1051 390-008765-51 10 51-60@100GHz “ “ “ “ “ “

DLOD2021 390-008766-21 20 21-40@100GHz ≤ 5.1dB “ “ “ “ ≤ 5.1dB

DLOD2041 390-008766-41 20 41-60@100GHz “ “ “ ≥ 45dB “ “

DLOD4021* 390-008767-21 40 21-60@100GHz ≤ 6.1dB “ ≥ 40dB ≥ 40dB “ N/A

*Integrated into DL4000P chassis (Occupies empty power supply slots)

Dual Window Wide Band Optical Splitters Ordering information and SpecificationsModel # Description Part # Port 1 | Ratio | Port 2 Port 1 | Insertion Loss | Port 2

DLOS2 50/50 Optical Splitter 390-008753-00 50% 50% ≤ 4.0dB ≤ 4.0dB

DLOS2-01 1/99 Optical Splitter 390-008753-01 1% 99% ≤ 23.1dB ≤ 1.1dB






CWDM Ordering information and Specifications | Channels 1271 through 1611 of iTU G694.2

Model # Part # # Channels Channels Insertion Loss(±7.0 nm)

Adjacent Channel Isolation Directivity Return

LossInsertion Loss Upgrade Port

DLOC4L 390-008752-00 4 1471, 1491, 1511, 1531 ≤ 2.2dB ≥ 30dB ≥ 40dB ≥ 40dB ≤ 2.2dB

DLOC4M 390-008752-01 4 1511, 1531, 1551, 1571 “ “ “ “ “

DLOC4H 390-008752-02 4 1551, 1571, 1591, 1610 “ “ “ “ “

DLOC40 390-008752-03 4 1471,1491, 1591, 1611 “ “ “ “ “

DLOC8 390-008752-04 81471, 1491, 1511, 1531, 1551, 1571, 1591, 1611

≤ 3.3dB “ “ “ ≤ 2.1dB

DLOC10 390-008752-10 10

1271,1291,1311,1331,1351, 1371,1391,1411,1431,1451

≤ 5.1dB > 25dB > 50dB > 45dB ≤ 1.1dB

DLOC18 390-008752-18 181271,1291,1311,1331,1351,1371,1391,1411,1431,1451,1471,1491,1511,1531,1551,1571,1591,1611

≤ 6.1dB “ “ “ N/A



DL4000 ViDEO TRAnSPORT SySTEM Contact Alarm ModulesDLM010 and DLM020

Single card in either power supply or function module slot:• Twothree-terminalalarmrelay contact closures—one each for MajorandMinorAlarms

• Allowsremotemonitoringof DL4000 alarm conditions

• Canbewiredasnormallyclosed (NC), or normally open (NO)

TheDLM010andDLM020providecontactclosuresignalingofMajorAlarmand

Minor Alarm from the DL4000 chassis. The DLM010 occupies one power supply slot.

The DLM020 occupies one function module slot.

Major Alarm

Minor Alarm

PowerController

RelayNCCNO

RelayNCCNO M

ajo

r

Min

or

Bac

kpla

ne

DLM010

DLM020

Ordering informationModel Description Part #

DLM010 Contact Alarm Module for Power Supply Slot 390-008008-00

DLM020 Contact Alarm Module for Function Modules Slot 390-008009-00

Specifications:Inputs/Outputs• Two-piece,six-terminallockingstrip• 48VACor48VDC@100mA• Isolatedfromchassis• 100 VDC maximum applied voltageRegulatory Conformance Compliance: NEBS Level 3, CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22

DLM

010

-020

_D

S_10

-10

-07

32



Accessories

DL4

00

0_

Acc

ess_

DS_

10-1

0-2

7


Ordering informationSingle Mode Optical Panel Patch Cords


FOCBLSCSC Fiber Optic Cable, SC/PC to SC/PC, 3 Meters Simplex 3.0mm 396-330130-00 FOCBLSCFC Fiber Optic Cable, SC/PC to FC/PC, 3 Meters Simplex 3.0mm 396-340130-00 FOCBLSCLC Fiber Optic Cable, SC/PC to LC/PC, 3 Meters Simplex 3.0mm 396-350130-00 FOCBLFCFC Fiber Optic Cable, FC/PC to FC/PC, 3 Meters Simplex 3.0mm 396-440130-00 FOCBLFCLC Fiber Optic Cable, FC/PC to LC/PC, 3 Meters Simplex 3.0mm 396-450130-00 FOCBLLCLC Fiber Optic Cable, LC/PC to LC/PC, 3 Meters Simplex 3.0mm 396-550130-00 FOCBLASCLC Fiber Optic Cable, SC/APC to LC/PC, 3 Meters Simplex 3.0mm 396-650130-00FOCBLLCLC-15 Fiber Optic Cable, LC/PC to LC/PC, 1 Meter Simplex 3.0mm 396-550110-15 15db Inline AttenuationFOCBLLCLC05M Fiber Optic Cable, LC/PC to LC/PC, 0.5 Meters Simplex 3.0mm 396-550105-00FOCBLSCLC2 Fiber Optic Cable, SC/PC to LC/PC, 2 Meters Simplex 3.0mm 396-350120-00

23” Mounting Hardware for DL4000 and DigiLink

Mini 75-ohm SMB to BNC

Single Mode Optical Panel Patch Cords

BNC to BNC Cable, 72” L

33

DL4100 Travel Case

DL4100 Travel Case


DL4100TC DL4100 Travel Case (Holds up to two DL4100 Chassis 399-101000-00 and Power Supplies

Mini SMB to BNC Cable


DL100MC-72 Monitor Cable, Mini 75-ohm SMB to BNC, 72”L 396-001001-00

DLBNC-72 Monitor Cable, BNC to BNC Cable, 72”L 396-001030-00

23” Mounting Hardware for DL4000 and DigiLink


MT23KIT MountingkitforDL4000ChassisandDigiLink 390-000314-00

15db Fixed Inline Attenuator

modular video transport system october 2010 dl4000...

Documents