modular washroom fittings for education
TRANSCRIPT
Modular Washroom Fittings for Education
ONVO originated from many years assisting architects with the design of school washrooms at Lovair. We recognised that we could be part of enhancing children’s experience at school and have a positive impact on the quality of their education. Lovair separated their education sector as a new company as of January 2018 to create greater clarity of focus and provide customer experience tailored to this sector.
The Lovair Latherwash® trough has been known and trusted by both architects and contractors for almost a decade because of its high quality and ease of installation.
ONVO are committed to supplying only the highest quality products, backed up by a consistent, honest service by always keeping our promises.
We hope this brochure is useful when specifying and we trust the case studies are inspirational. School washrooms are our genuine passion and we would be delighted to discuss any ideas or challenges you may have. Please call us on 0161 302 5340 or email us at [email protected].
CONTENTS
Latherwash 2WLatherwash 2D Latherwash 2D with Modular Frame Latherwash 2NCurvewash 2WCurvewash 2D180 Sensor Tap140 Sensor Tap480 Soap DispenserSoap Systems766 Soap DispenserSoap SystemsV22 Soap Dispenser787 Toilet Roll Holder89 Hand Dryer735 Paper Towel DispenserWash Fountains
5791112131515171719192121232324
ONVO…THE NEW NAME INSCHOOL WASHROOMS.
The ONVO Latherwash 2W is ideal for educational facilities where the wall build up can be designed to accommodate a 150mm void behind the trough. This is the slimmest trough in the ONVO range at only 307mm deep, with all the pipework and wires concealed in the void behind. No boxing in underneath is required, lending itself to a minimalistic floating effect.
Product Codes:
Code Length* Users Brackets Weight
602W 600mm 1 2 25Kg1202W 1200mm 2 3 40Kg1802W 1800mm 3 4 56Kg2402W 2400mm 4 5 71Kg3002W 3000mm 5 6 87Kg
*Bespoke lengths also available if required
+44 (0)161 302 [email protected]
4 / 5
Archbishop McGrathBridgend
Dreghorn Primary SchoolNorth Ayrshire
Whatriggs Primary SchoolEast Ayrshire
CASE STUDIES LATHERWASH 2W
Length
200
500
300
300
300
300
150mm Minimum Cavity
Fixing Locations
307
250
9021
0
Inst
allt
ion
Heig
ht158
116
600
600
600
600
300
270
307
24
Bracket Positions
Installation Heights:
Junior – 700mmKS3 – 800mmKS4 – 850mm
180 Sensor TapPage 15
480 Soap DispenserPage 17
Related Products:
The ONVO Latherwash 2D is perfect for installing directly onto a solid wall. The taps are mounted onto the deck of the trough and therefore no void is required behind. The Latherwash 2D is very slim, only projecting 400mm from the wall and can be used with the complimentary ONVO Modular Frame System to conceal the pipework and wires underneath, see page 9.
Product Codes:
Code Length* Users Brackets Weight
602D 600mm 1 2 27Kg1202D 1200mm 2 3 42Kg1802D 1800mm 3 4 58Kg2402D 2400mm 4 5 73Kg3002D 3000mm 5 6 88Kg
*Bespoke lengths also available if required
CASE STUDIES LATHERWASH 2D
Length
300
300
300
8090
7827
038
116
400
9021
0
158
338
380
398
300
600
600
600
600
Bracket Positions
Fixing Locations
For installation heights lower than 700mm, please refer to page 11.
St Luke’s Primary SchoolManchester
The Deans Primary SchoolManchester
Lagerkvists Skola
+44 (0)161 302 [email protected]
6 / 7
140 Sensor TapPage 15
766 Soap DispenserPage 19
Related Products:Inst
allt
ion
Heig
ht
Installation Heights:
Junior – 700mmKS3 – 800mmKS4 – 850mm
The ONVO Latherwash 2D with Modular Frame is designed for installations where the pipework below the trough needs to be concealed or where the trough cannot be cantilevered off the wall. The taps are mounted onto the deck of the trough and therefore no void is required behind. The Latherwash 2D with Modular Frame is very slim, only projecting 400mm from the wall.
Product Codes:
Code Length* Users
602D/MF 600mm 11202D/MF 1200mm 21802D/MF 1800mm 32402D/MF 2400mm 43002D/MF 3000mm 5
*Bespoke lengths also available if required
Heath ParkWolverhampton
CASE STUDIES LATHERWASH 2DWITH MODULAR FRAME
+44 (0)161 302 [email protected]
8 / 9
For installation heights lower than 700mm, please refer to page 11.
Installation Heights:
Junior – 700mmKS3 – 800mmKS4 – 850mm
300
7870
0
55 545 30
300
250
270
38
398
300 600600
140 Sensor TapPage 15
766 Soap DispenserPage 19
Related Products:
The ONVO Latherwash 2N is designed for situations where there is no wall void and can be installed as low as 500mm from the floor to the trough rim! This trough always comes with the ONVO Modular Frame System and even when installed as low as 500mm, there is still 300mm underneath for access. This ability to be installed at low height combined with the slimness of the trough, means the sensor taps are easy to use for children as young as 2 years.
Product Codes:
Code Length* Users
602N 600mm 11202N 1200mm 21802N 1800mm 32402N 2400mm 43002N 3000mm 5
*Bespoke lengths also available if required
Maidens NurserySouth Ayrshire
Annbank Primary SchoolSouth Ayrshire
CASE STUDIES LATHERWASH 2N
+44 (0)161 302 [email protected]
10 / 11
Installation Heights:
Early Years – 500mmInfants – 600mm
For installation heights higher than 600mm, please refer to page 9.
400
500
150
250
300
83 500 83.5
300600 600
Length
140 Sensor TapPage 15
766 Soap DispenserPage 19
Related Products:
The ONVO Curvewash 2D does not have a removable front panel. We recommend this product for installations above 700mm to allow room for access underneath. The Curvewash 2D can be installed directly onto a solid wall projecting only 422mm. This trough can be used with the complimentary ONVO Modular Frame System to conceal the pipework and wires underneath, see page 9.
Product Codes:
Code Length* Users Brackets Weight
60CD 600mm 1 2 28Kg12CD 1200mm 2 2 45Kg18CD 1800mm 3 3 62Kg24CD 2400mm 4 4 79Kg30CD 3000mm 5 5 93Kg
*Bespoke lengths also available if required
The ONVO Curvewash 2W does not have a removable front panel and can therefore be installed as low as 500mm to the trough rim. This trough requires an accessible 150mm void behind to accommodate for pipework and wires.
Product Codes:
Code Length* Users Brackets Weight
60CW 600mm 1 2 24Kg12CW 1200mm 2 2 40Kg18CW 1800mm 3 3 56Kg24CW 2400mm 4 4 72Kg30CW 3000mm 5 5 88Kg
*Bespoke lengths also available if required
CURVEWASH 2DCURVEWASH 2W
Length Length
LengthLength
150mm Minimum Cavity
Fixing Locations Fixing Locations
225
300
300
12
422
80
78
213
110
600
600
12
312
600
600
7821
3
300
300
300
250
312
225
250
Guid
e He
ight
s
Guid
e He
ight
s
+44 (0)161 302 [email protected]
12 / 13
Installation Heights:
KS3 – 800mmKS4 – 850mm
Installation Heights:
Early Years – 500mmInfants – 600mm
180 Sensor TapPage 15
480 Soap DispenserPage 17
Related Products:
140 Sensor TapPage 15
766 Soap DispenserPage 19
Related Products:
Product Codes:
Code Power supply Length Weight Finish
141C Battery 115mm 1.06Kg Chrome142C Mains 115mm 1.06Kg Chrome
The ONVO 180 sensor tap is to the used with the Latherwash 2W Washtrough. At 170mm long, the water hits the centre of the trough eliminating any splashing. Its minimalistic design and robustness makes it ideal for schools. A minimum 150mm void is required behind the tap for the flexi hose and wires.
The ONVO 140 sensor tap is designed to sit on the deck of the Latherwash 2D Washtrough. This is the most robust tap in the ONVO range and with the flexi hose and wires all below, can be installed in situations where a wall void is not achievable.
Product Codes:
Code Power supply Length Weight Finish
181C Battery 170mm 1.16Kg Chrome182C Mains 170mm 1.16Kg Chrome
CASE STUDIES 180 SENSOR TAP
140 SENSOR TAP
Whatriggs Primary SchoolEast Ayrshire
Dreghorn Primary SchoolNorth Ayrshire
Annbank Primary SchoolSouth Ayrshire
Side
Side
Front
Front
12mm min33mm max
Min void150mm
154.4
115
55
43
28
12mm min28mm max
5582
120
23 51
15
10
13170mm
+44 (0)161 302 [email protected]
14 / 15
Latherwash 2W page 5480 Soap Dispenser page 17
Latherwash 2D page 7766 Soap Dispenser page 19
Related Products:
Related Products:
Product Codes:
Code Length Weight Finish
480C 120mm 0.5Kg Chrome
Product Codes:
Code Size Feeds
FB1 1 litre 1 *Not compatible with 480 seriesST1 5 litre 1 ST2 5 litre 2 ST3 5 litre 3 ST4 5 litre 4
The ONVO 480 soap dispenser is push operated and designed to complement the 180 sensor tap. The dispenser can be fed via a single or multi-feed system as detailed below. The soap container needs to be situated below the dispenser within a two-meter range. We recommend this being in the void behind the washtrough with easy accessibility.
The ONVO soap system can feed up to four dispensers from one central 5L container. The soap container must be situated underneath the dispenser within two meters and easily accessible.
CASE STUDIES 480 SOAP DISPENSER
SOAP SYSTEMS
Side Front
Min void150mm
12mm min50mm max
94
169
69
120 25
38
228
+44 (0)161 302 [email protected]
16 / 17
Latherwash 2W page 5180 Sensor Tap page 15
Related Products:
Product Codes:
Code Length Weight Finish
766C 114mm 0.78Kg Chrome
The ONVO 766 soap dispenser is push operated and complements the 140 sensor tap. Single and multi -feed options are available as detailed below. The soap container must be situated underneath the washtrough within two meters of the dispenser and easily accessible. Our solution for this is the ONVO Modular Frame system on Page 9.
CASE STUDIES 766 SOAP DISPENSER
Side Front
114
73
10
74
84
12mm min55mm max
68
8
21
38
120
+44 (0)161 302 [email protected]
18 / 19
Latherwash 2D page 7140 Sensor Tap page 15
Related Products:
Product Codes:
Code Size Feeds
FB1 1 litre 1 *Not compatible with 480 seriesST1 5 litre 1 ST2 5 litre 2 ST3 5 litre 3 ST4 5 litre 4
The ONVO soap system can feed up to four dispensers from one central 5L container. The soap container must be situated underneath the dispenser within two meters and easily accessible.
SOAP SYSTEMS
Product Codes:
Code Capacity Weight Finish
787C 1 Roll 1.66Kg Chrome787CS 1 Roll 1.66Kg Satin
The ONVO 787 is a lockable stainless-steel Jumbo toilet roll holder. Easy to install and robust.
CASE STUDIES
787 TOILET ROLL HOLDER
Product Codes:
Code Capacity Weight Finish V22C 1000ml 1.22Kg ChromeV22CS 1000ml 1.22Kg Satin
The ONVO V22 is a push operated soap dispenser for a standard wall mounted installation. This unit can be installed either above the Washtrough or on the wall anywhere in the washroom.
V22 SOAP DISPENSER
Side
Side
Front
Front
95
77 90
267
1252
308.6
412
318
300
110
267
101
+44 (0)161 302 [email protected]
20 / 21
Product Codes:
Code Voltage Frequency Amps Finish
89W 220-240V 50Hz 8A White89C 220-240V 50Hz 8A Chrome89CS 220-240V 50Hz 8A Satin
Product Codes:
Code Capacity Weight Finish
735C 400-600 Paper Towels 2.04Kg Chrome735CS 400-600 Paper Towels 2.04Kg Satin
The Air Fury is well known in the market for its high speed, energy efficient hand drying. The Air Fury is very compact and robust and has the unique feature of noise adjustability.
The ONVO 735 is our solution if paper towels are to be used instead of hand dryers. Lockable, robust and manufactured from stainless-steel, it is the ideal product for schools.
CASE STUDIES 89 HAND DRYER
735 PAPER TOWEL DISPENSER
+44 (0)161 302 [email protected]
22 / 23
185 209
124
6523
111°
111°
325
23
375
370
285
Key location
289
Side
Side
Front
Front
8 USER WASH FOUNTAIN
+44 (0)161 302 [email protected]
24 / 25
The ONVO Washfountains are designed for secondary schools and particularly open plan washrooms. Washfountains are very robust and ideal for areas with limited wall space. They come with a built in and easily replenished soap dispenser system.
Product Codes:
Code Operation
97CS Push98CS Sensor
The ONVO Washfountains are designed for secondary schools and particularly open plan washrooms. Washfountains are very robust and ideal for areas with limited wall space. They come with a built in and easily replenished soap dispenser system.
Product Codes:
Code Operation
55CS Push56CS Sensor
6 USER WASH FOUNTAIN
89 Hand DryerPage 23
735 Paper Towel DispenserPage 23
Related Products:
Top
Front Side
Top
Front Side
ø930 ø1355Removable lid
Soap refill cap
420
267 10
80
864
697
530
Accessdoor
Manual tapManual soap dispenser
508
211
420
Removable lid
Soap refill cap
267
Access door
Sensor tap
Manual soap dispenser
Fixed to the floor
Fixed to the floor
1/2 BSP Hot and cold water, 2x40mm straight waster and electricity points from below
1/2 BSP Hot and cold water, 2x40mm straight waster and electricity points from below
1080
860
740
530
508
211
89 Hand DryerPage 23
735 Paper Towel DispenserPage 23
Related Products:
Astro House12F Adlington Business ParkLondon South RoadCheshireSK10 4PZUnited Kingdom
+44 (0)161 302 [email protected]
LinkedIn: Search ONVO Modular
Astro House12F Adlington Business ParkLondon South RoadSK10 4PZCheshireUnited Kingdom
+44 (0)161 302 [email protected]
LinkedIn: Search ONVO Modular