module 2 unit 1

10
Technician Module 2 Unit 1 Slide 1 MODULE 2 UNIT 1 Introduction & Review

Upload: aladdin-blackburn

Post on 03-Jan-2016

74 views

Category:

Documents


7 download

DESCRIPTION

MODULE 2 UNIT 1. Introduction & Review. Unit 1 Learning Objective. At the end of this unit of training each student will demonstrate knowledge of the pre-requisite course materials and will demonstrate an understanding what the Performance – Offensive (Level B) means. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 1

MODULE 2UNIT 1

Introduction & Review

Page 2: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 2

Unit 1 Learning Objective

At the end of this unit of training each student will demonstrate knowledge of the pre-requisite course materials and

will demonstrate an understanding what the Performance – Offensive (Level B)

means.

Page 3: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 3

Student Performance Objectives

• Have successfully completed training at the Awareness Level and Performance Level A for events involving hazardous materials, and for weapons of mass destruction (WMD) and other specialized training.

• Have successfully completed training at the Awareness Level and Performance Level A for events involving hazardous materials, and for WMD and other specialized training.

• Complete training (or have had equivalent training and experience) in and understand the guidelines for the law enforcement officer at the Awareness Level and Performance LevelA.

Page 4: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 4

• Know terms used or associated with WMD agents and with mechanical and nonmechanical equipment that will be used by the officer in the performance of specialized tasks or assignments. Some of this mechanical equipment would be used to remove and transport suspicious packages and/or potential bombs or explosives to a safe location or to a container. Other equipment may include robots used to remove a potential bomb or explosive device, sampling equipment to help determine WMD agents and materials, and PPE for shielding and transporting radioactive materials.

Student Performance Objectives

Page 5: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 5

• Know terms used or associated with WMD agents and with equipment that will be used by the EMS responder in the performance of specialized rescue tasks or assignments. This equipment will include PPE and medical materials used in rescue efforts in the hot zone.

• Understand the terminology (including any glossary of WMD terms, chemical reference manuals, equipment manuals), classes of materials and agents, and toxicology of hazardous materials and WMD agents, and of the equipment likely to be used by HazMat responders.

Student Performance Objectives

Page 6: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 6

The “Guidelines”

The Office of Domestic Preparedness (ODP) is a federal agency under the direction of the Department of

Homeland Security. Part of their responsibility is to establish federal guidelines and national standards for the levels of responders at terrorism incidents. ODP

has established a set of performance objectives called “Guidelines” These guidelines are intended to be met throughout the course much the same way that OHSA

and NFPA establish performance objectives for successful completion of those courses.

Page 7: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 7

Previous Courses

• HazMat & WMD Awareness

• HazMat Operations

• WMD Performance-Defensive• HazMat Technician

• WMD Performance -Offensive

Page 8: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 8

Course Review

• Review the outline in your book

Page 9: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 9

Unit 1 Quiz

Page 10: MODULE 2 UNIT 1

Technician Module 2 Unit 1 Slide 10

Questions