module redundant network datasheet - teletek electronics...•iris - addressable fire panel •simpo...

1
Module Redundant Network IRIS/SIMPO Redundant Network Module IRIS/SIMPO is a module used for building of a Ethernet network between Teletek Electronics addressable panels IRIS and SIMPO. The modules allows to connect up to 32 fire alarm panels in network and secure a back up connection line of the communication between the panels. Communication is over RS 485 protocol. Maximum distance between two Redundant network modules is 1000 m. Communication ............................... RS485 Back up connection line between the panels ......... Yes Maximum fire alarm panels in network ............. 32 Maximum distance between two modules ........... 1000 m. Programming ................................ from the panel Power supply ................................. from the panel Interface connection between the panel and module . . Yes Cable connection: - Twisted pair - Length .................................... max. 1000m (between two modules) - Cross Section .............................. 0.5 - 2.5mm2 Operation Modes: - Normal ................................... Blinking LEDs - Trouble ................................... Lighting on LEDs Description Technical and functional specifications IRIS - Addressable Fire Panel SIMPO - Addressable Fire Panel Compatible Product Range Packing Information Teletek Electronics JSC 14A Srebarna Str, 1407 Sofia, Bulgaria Tel.:+359 2 9694 800 Fax: +359 2 9625 213 [email protected] www.teletek-electronics.com Contact Information Single packing - 1 unit Module Redundant Network , packed in protective carton box. Carton packing box - 150 units Module Redundant Network , dimensions 490 x 357 x 220mm. IRIS/SIMPO IRIS/SIMPO IMPORTANT NOTE! Operation with Redundant Network Module IRIS/SIMPO is supported for the following revisions of the panesl: For RIS fire alarm panel: џ LCD PCB Hardware revision: 2.4 and higher џ MAIN Board Firmware revision: 4.2 and higher For SIMPO fire alarm panel: џ MAIN Board Firmware revision: 2.8 and higher

Upload: others

Post on 22-Mar-2021

8 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Module Redundant Network Datasheet - Teletek Electronics...•IRIS - Addressable Fire Panel •SIMPO - Addressable Fire Panel Compatible Product Range Packing Information Teletek Electronics

Module Redundant Network IRIS/SIMPO

Redundant Network Module IRIS/SIMPO is a module used for building of a Ethernet network between Teletek Electronics addressable panels IRIS and SIMPO.

The modules allows to connect up to 32 fire alarm panels in network and secure a back up connection line of the communication between the panels.

Communication is over RS 485 protocol.

Maximum distance between two Redundant network modules is 1000 m.

•Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS485•Back up connection line between the panels . . . . . . . . . Yes•Maximum fire alarm panels in network . . . . . . . . . . . . . 32•Maximum distance between two modules . . . . . . . . . . . 1000 m.•Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from the panel •Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from the panel•Interface connection between the panel and module . . Yes

•Cable connection: - Twisted pair - Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . max. 1000m (between two modules) - Cross Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 - 2.5mm2•Operation Modes: - Normal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blinking LEDs - Trouble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lighting on LEDs

Description

Technical and functional specifications

•IRIS - Addressable Fire Panel•SIMPO - Addressable Fire Panel

Compatible Product Range

Packing Information

Teletek Electronics JSC14A Srebarna Str, 1407 Sofia, Bulgaria

Tel.:+359 2 9694 800Fax: +359 2 9625 213

[email protected]

Contact Information

•Single packing - 1 unit Module Redundant Network , packed in protective carton box.•Carton packing box - 150 units Module Redundant Network , dimensions 490 x 357 x 220mm.

IRIS/SIMPOIRIS/SIMPO

IMPORTANT NOTE!Operation with Redundant Network Module IRIS/SIMPO is supported for the following revisions of the panesl:

For RIS fire alarm panel:џ LCD PCB Hardware revision: 2.4 and higherџ MAIN Board Firmware revision: 4.2 and higherFor SIMPO fire alarm panel:џ MAIN Board Firmware revision: 2.8 and higher