moldings
DESCRIPTION
Fireclay MoldingsTRANSCRIPT
53
Over 70 di!erent moldings are available. "e standard length is six inches. Four inch moulding piece are also available and are priced the same as six-inch moldings. Eight-inch and twelve-inch molding are special order items, please call for availability and lead time.
Each molding style has a letter or number designation. Molding cap pieces are available for most of the molding styles. "e word “cap” after the molding means the piece can be used as a vanity or kitchen cap. "e drop of the cap varies depending on the molding piece. "e edge cap generally has a one-inch lip. If the pieces are to be used as a wainscot, the cap lip can be made smaller. Please specify you exact requirements.
Outside 90-degree corners, stop ends and picture frame corners (PFC) are available in all molding styles. A layout drawing may be necessary to communicate the exact type of picture frame corner required.
During the firing process the glaze will run and pool in the lower recesses on molding pieces, especially those with curved surfaces. "is causes some color variation on theses pieces. Debris and Vitrail glazes appear light and dark depending on the manner in which the glaze pools on each molding piece.
Molding and Molding Caps
54 M o l d i n g s
Square cap
Molding 69
Molding 78
Molding 1D
Molding 1F
Molding 45
Molding 93
Molding 50
Half Round
Molding G
Molding C cap
Molding 54
Molding 1D cap
Molding 76
Molding 40 cap
Molding A
Molding 54 cap
Molding 93 cap
Please Note: Sizes are approximate, Vitrail shrinks more than Debris - molding tile heights are rounded up to nearest quarter inch (1/4”).
1 X 6 2 X 6
2 .25 X 6
1.5 X 6
Molding 1D
1.25 X 6
Molding 1F
Molding 45 cap
Molding U
Speed cap
Ogee
Molding T cap
55M o l d i n g s
Molding P cap
Molding K cap
Molding F cap
Molding D cap
Molding D
Molding 84
Molding 49 cap
Molding Q cap
Molding R cap
Molding 75
Molding 47 cap
Molding 27 cap
Molding 43 cap
Molding 43
2 .25 X 6
2 .5 X 6
3 X 6
Molding K
Molding Q
Molding I
Double Radius Bullnose
Molding C
Molding 46 cap
Molding 41 cap
56 M o l d i n g s
Molding E
Molding 95
Molding 82
Molding 81 cap
Molding 80 cap
Molding 94
Molding 95 cap
Molding E cap
Molding 85
Molding B
Molding 85 with pearls
Sink cap
Molding Q
Molding O-6
Molding B cap
3 X 6
3 .25 X 6
Molding O cap
Sink cap out
Molding 80
Molding E cap
Molding B cap
57M o l d i n g s
Please Note: Sizes are approximate, Vitrail shrinks more than Debris - molding tile heights are rounded up to nearest quarter inch (1/4”).
Cove Base4 x 6
Molding 92
Double Radius
Radius
Molding 86
Molding 74
Molding 34Molding 90
6 x 6
Molding 72 8 x 6’, 8 x 12
Debris only
Molding 96 4 x 6
Molding 77 4.25 x 6
Molding 44 4.5 x 6
Molding 33
3 .5 X 6
3 .75 X 6
58 M o l d i n g s
Molding 1041 x 6
Molding 106 1 x 6
Molding 100 1.5 x 6
Molding 99 1.25 x 6
Molding 103 1.25 x 6
Quarter Round 1.25 x 6
Molding 102 1.875 x 6
Molding 97 2 x 6
Molding 98 2 x 6
Molding H 2 x 6
Molding 2E cap 2.5 x 6
Molding 2E 2.5 x 6
Molding I cap, 2.5 x 6
Molding O cap 2.5 x 6
Molding 105 3.25 x 6
Molding 1014.5 x 6
Molding 63 6 x 6
Double Radius Bullnose
2..5 x 6”
Beak1 x 6
Finger Cove1 x 6
59M o l d i n g s
Molding L - 6 x 6, 6 x 12”, Debris only
Molding M - 6 x 6, 6 x 12”, Debris only
Molding N - 6 x 6, 6 x 12”, Debris only
Molding 72 - 8 x 6, 8 x 12”, Debris only
Egg and Dart M - 3.5 x 8
Double Reed - 4 x 6
Avignon M - 5 x 6
Please Note: Sizes are approximate, Vitrail shrinks more than Debris - molding tile heights are rounded up to nearest quarter inch (1/4”).
Chelsea M 1.5 x 6
Chelsea Cap M 1.5 x 6
Avalon M 2.5 x 6
Cotswold M 2.5 x 6
Vienna M 2.5 x 6
REL I EF