monocotsdicots 1 cotyledon (storage tissue that provides nutrition to the developing seedling) ...
TRANSCRIPT
MONOCOTS DICOTS
1 cotyledon (storage tissue that provides nutrition to the developing seedling)
Parallel pattern of veins in leaves
Flower parts in 3’s Vascular bundles
scattered Fibrous root system
2 cotyledons Branching pattern of
veins in leaves Flower parts in 4’s,
5’s, or multiples therof
Vascular bundles organized in a circle
Taproot (a large single root)
Flower parts in 3’s
Fibrous root system
One cotyledon →
Parallel venation
Scattered vascular bundles
2 cotyledons
Taproot
Flower parts in 4’s, 5’s
Branched venation
Vascular bundles in rings
Ground Tissues (3 types—differ mostly in their cell walls)—shown in light blue
Dermal tissues (cover the plants surfaces)—shown in pink
Vascular tissues (transport materials)—shown in purple
Parenchyma cells: most common component of ground tissue, have thin walls and serve various functions including storage, photosynthesis and secretion
Collenchyma cells: have thick but flexible cell walls
Sclerenchyma cells: have thicker walls than collenchyma, serve as mechanical support.
Dermal tissue consists of epidermis cells that cover the outside of plant parts, plus:
Guard cells that surround stomata Specialized surface cells such as hair cells,
stinging cells, and glandular cells. Epidermal cells secrete the cuticle (waxy
coating)
Two main kinds: Xylem and Phloem. The two usually occur together in Vascular Bundles.
Xylem function in the conduction of water and minerals
It also provides mechanical support. (In addition to the primary cell wall that all plant cells have, the xylem cells have a secondary cell wall that gives them additional strength).
Pits are locations where the secondary cell wall is absent.
Most xylem cells are dead at maturity. They are essentially cell walls, completely lacking cellular components & only contain the material being transported.
There are 2 kinds: Tracheids and Vessel elements
TRACHEIDS VESSEL MEMBERS
long and tapered; water passes from one tracheid to another through pits on the overlapping tapered ends of the cells.
shorter and wider with no taper;
Water passes from one vessel to the next through areas devoid of both primary and secondary cell walls (called perforations)
Phloem functions in the conduction of sugars.
It is made of cells called sieve-tube members that form fluid-conducting columns called sieve tubes.
Pores on the end walls of sieve-tube members form sieve plates where the cytoplasm of both cells combine.
Companion cells provide support to the sieve-tube members.
A seed consists of an embryo, a seed coat, and some kind of storage material.
The major storage material may be endosperm or cotyledons.
Cotyledons are formed by digesting the storage material in the endosperm.
Most of what you see when you look at the two halves of a dicot seed are the two cotyledons.
In many monocots, such as corn, most of the storage tissue is endosperm, with only one cotyledon to transfer nutrients to the embryo.
The embryo consists of: Epicotyl—becomes the
shoot tip Young leaves called the
plumule Hypocotyl-becomes the
shoot Radicle –becomes the root Coleoptile (in monocots)
surrounds and protects the epicotyl.
Dicot seed
Monocot seed
After a seed reaches maturity, it remains dormant until specific environmental cues exist
Most important: water. Others include temperature, light or seed coat damage (ex: from fire or digestive enzymes from an animal)
Germination begins with absorption of water. Water initiates the activity of certain enzymes,
which activate respiration. The seed swells, and the coat cracks.
The radicle produces roots, then the shoot grows.
Dicot Seed Germination Monocot Seed Germination
For many plants, actively dividing cells occur only at the apical meristems (the tips of roots and shoots).This growth increases the length of a shoot or root.
The tissues that develop from this growth are primary tissues
Some plants, like conifers and woody dicots undergo secondary growth in addition to primary growth.
Whereas primary growth extends the length of plant parts, secondary growth increases their girth and is the origin of woody plant tissues. Growth occurs at 2 places:
vascular cambium and cork cambium.
The functions of roots are:
To anchor plants To absorb water
and nutrients May store
carbohydrates or water
← A taproot system branches in a way similar to human lungs—the roots start as one thick root on entrance into the grounds, and then divide into smaller and smaller branches called lateral roots underneath the surface. These serve to hold the plant in place.
Dicots—Taproot System
Fibrous Roots → Provide plants with a very strong anchor in the ground without going very deep into the soil.
Monocots—Fibrous Root System
Epidermis lines the outside surface of the root. In the zone of maturation, epidermal cells produce root hairs, which increase the absorptive surface.
The cortex makes up the bulk of the root. Its main function is the storage of starch.
The cortex often contains numerous intercellular spaces, providing air for cellular respiration.
The endodermis is a ring of tightly packed cells at the innermost portion of the cortex.
A band of fatty material, called suberin, impregnates the endodermal cell walls where they make contact with adjacent endodermal cell walls. This encircling band around each cell is called the Casparian Strip.
The Casparian Strip creates a water-impenetrable barrier between the cells.
As a result of the Casparian Strips, all water passing through theendodermis must pass through the endodermalcells and not between them
Inside the endodermis is the Stele (vascular cylinder). The outer part of the stele consists of one to several layers of cells called the pericycle (from which lateral roots arise).
Inside the pericycleis the vascular tissue. The structures of thexylem and phloem differ betweenmonocots and dicots.
MONOCOT ROOT DICOT ROOT
Note that in monocots the xylem and phloem occur in bundles in a circle around the pith.
Note that in dicots, the xylem forms a cross in the center with phloem in clusters between the “arms” of the cross.
In most plants stems are located above the soil surface but some plants have underground stems. A stem develops buds and shoots and usually grows above the ground. Inside the stem, materials move up and down the tissues of the transport system.
The stem’s epidermis contains epidermal cells covered with a waxy substance called cutin. The cutin forms a protective layer called the cuticle.
The cortex consists of the various ground tissue types that lie between the epidermis and the vascular cylinder.
The vascular cylinder consists of xylem, phloem, and pith.
A single layer of cells between the xylem and phloem may remain undifferentiated and later become the vascular cambium.
Monocot Stem Cross-Section—notice how the vascular bundles are scattered throughout the pith and cortex.
Close-up view of vascular bundle in a monocot stem
Below: Dicot Stem Cross Section—Note that the vascular bundles are arranged in a ring surrounding the pith.
Above: vascular bundle in a dicot stem cross-section
The vascular cambium originates between the xylem and phloem and becomes a cylinder of tissue that extends the length of the stem and roots.
The cambium layer is meristematic, producing new cells on both the inside and outside of the cambium cylinder.
Cells on the inside of the cambium cylinder differentiate into secondary xylem cells; those on the outside differentiate into secondary phloem cells.
Over the years, secondary xylem accumulates and increases the girth of the stem and root.
Similarly, new secondary phloem is added yearly to the outside of the cambium layer. As a result, tissues beyond the secondary phloem are pushed outward as the xylem increases in girth.
Tissues outside the secondary phloem get pushed outward and are eventually shed.
In order to replace the shed epidermis with a new protective covering, new cells are produced by the cork cambium. The cork cambium produces new cells primarilyon the outside.
Each year, new layers of secondary xylem are produced by the vascular cambium.
Recall that xylem tissue, which is the actual wood of the plant, is dead at maturity. Xylem produced during the most recent years remains active in the transport of water.
This xylem is referred to as sapwood. Older xylem, located toward the center of the stem is called heartwood and functions only as support.
In many environments, conditions vary during the year, creating seasons during which plants alternate growth with dormancy.
During periods of growth, the vascular cambium is actively dividing, then stops at the end of the season. The alternation of growth and dormancy
produces annual rings in the secondary xylem tissue. These rings can be used to determine the age of a tree. Since the size of the rings is related to the amount of water available during the year, rings can provide a record of rainfall.
Leaves are the primary photosynthetic organs of the plant.
Their structures provide optimal conditions for photosynthesis to occur.
Leaves are protected by the waxy cuticle of the epidermis, which functions to decrease the transpiration rate (and loss of water).Inside the epidermis lies the ground tissue of the leaf, the mesophyll, which is involved in photosynthesis.
Most of the photosynthesis occurs in the palisade mesophyll, where there are many chloroplasts
The spongy mesophyll cells provide CO2 to the cells performing photosynthesis.
Stomata are controlled by guard cells that line the walls of the epidermis (especially on the underside).
When open, mesophyll cells have access to CO2 and water and photosynthesis can continue.
However, they could dry out due to excess transpiration.
The process of opening and closing the stomates must be carefully controlled.
When water flows into guard cells (↑ turgor pressure), the stomates open.
When water flows out of the guard cells, the stomates close.