monthly notifications register - sutn€¦ · h11 heater controls 161 58 h12 ceramic and glass-ware...

Information procedure

Monthly Notifications Register

Notifications registered at CMC from 2010-02-01 to 2010-02-28

Register issued on : 2010-03-05

2010-02

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180,

373

A11 Security Services / CEN/BT/TF 167;

391; 384; 370;

CEN/WS 044

A12 Consultancy Services / 395; 381

A99 Undetermined / CEN/WS 002 CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051 375; 374; 376; 385

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277;

346; 349 284; 288; 297; 340;

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371

CEN/BT WG 173 CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229 B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 /

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Technical energy saving 203 CEN/CLC/JWG 3 CEN/CLC/JWG 4 CEN/WS 027

F99 Undetermined / 389

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2

65, 157

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196

378

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383 CEN/WS 019

N03 Petroleum products 28 19; 336 CEN/WS 038

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238

N22 Feather and related materials / 222

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162 CEN/WS 026

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC JWG/AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 CEN/WS 053

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400 CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS 377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS eGO CEN/WS BII CEN/WS ADN CEN/WS CAT CEN/WS CST CEN/WS DIS CEN/WS ESR CEN/WS EUR CEN/WS FIN CEN/WS GEN CEN/WS ISD CEN/WS NEA CEN/WS NOM

CEN/WS QIS CEN/WS TWE CEN/WS WAC CEN/WS eIN CEN/WS ePR

Information procedure Page 2



Sector A : SERVICES


Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 49010620/0001 Project EstablishedICS : 03.100.01National Ref : U49010620Title : Maintenance - Guide for audits of the Maintenance System ManagementScope : This standard gives the guidelines and the general criteria to carry out a maintenance audit.

This standard has the primary aim to verify the strategic role of the maintenance function when individual plans have to be defined and when the strategic development and company asset management objectives have to be discovered. The coherence of the maintenance policies with the strategy of the company shall also be evaluated. This standard has the further aim to define the minimum qualification for the qualification of the auditor and the minimum requirements of the company maintenance system (for one-man, small and large companies).

Relatedness :National : REV/AMD

Subsector : A05 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 49010630/0001 Project EstablishedICS : 03.100.01National Ref : U49010630Title : Maintenance - Integration between Design and MaintenanceScope : This standard proposes the criteria to be considered when an item is designed, in order to

duly take into consideration the maintenance needs. It is addressed to designers and manufacturers of goods.


Subsector : A05 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 49010640/0001 Project EstablishedICS : 03.100.30National Ref : U49010640Title : Maintenance - Qualification of maintenance operators and technicians - Additional

indication with reference to CEN TR 15628Scope : This document refers to CEN TR 15628, which reports the current situation to define the

competence and knowledge levels of the maintenance personnel. It considers the typologies of professionality of the maintenance people and the minimum level of qualification in function of each role and industrial sector. Managerial, technical, engineering and operational roles are considered. Skill required for the operator who needs of carry out simple activity of operational maintenance and inspection (automaintenance) is considered as well. In particular levels of competence should be directly related to activities that play professionally trained at institutions operating in the area.


Subsector : A05 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167526/0001 Project EstablishedICS :National Ref : NF X60-027Title : Process of maintenance and bonds with the indicators

Relatedness :National : New

** End of Subsector **

Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 (Secondary Subsector)

Registration Date : 2010-02-01

Organization : BSI Draft Issue Date : 2010-01-27Country : United Kingdom Latest Date for Comments : 2010-03-31Project ID : 00903054/0001 Draft for public enquiryICS :National Ref : BS 22475-2Title : Geotechnical investigation and testing. Sampling methods and groundwater

measurements. Part 2. Qualification criteria for enterprises and personnel


Subsector : A06 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10001/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3424Title : Condition survey of construction works - Contents and executionScope : This standard specifies requirements of a condition assessment of construction works (or

parts of it) and can be used for buildings, bridges, tunnels or other construction works. It describes and defines different levels of survey , condition classes and consequence classes.


Subsector : A06 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10002/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3600Title : Documentation requirements for condition assessment of houses in case of sales Scope : This standard specifies minimum requirements of a condition assessment of houses in case

of a sales situation.



Subsector A99: UNDETERMINED.



Organization : BSICountry : United KingdomProject ID : 01000180/0001 Project EstablishedICS :National Ref : BS 8540Title : Service design process. Guide




Organization : BSICountry : United KingdomProject ID : 01000259/0001 Project EstablishedICS :National Ref : BS 8905Title : Guidance on the sustainable use of materials


Subsector : A99 Registration Date : 2010-02-03Organization : NENCountry : NetherlandsProject ID : 50001534/0001 Project EstablishedICS : 03.080.20National Ref : NEN 8380:2010 Concept nlTitle : Customer contract centers - Certification scheme for NEN-EN 15838 Customer Contact

Centres - Requirements for service provisionScope : This standard describes the certification scheme which aknowledged certification bodies

can use by making an agreement with NEN.


Subsector : A99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 83000700/0001 Project EstablishedICS : 03.080.20, 03.100.10, 03.100.40National Ref : U83000700Title : Project Management - Guidelines to deliver services of project management for public

Title : administrationsScope : This standard is intended to provide to central, peripheral and local government and all

organizations subject to similar legislation, a frame of reference and operational advice on all aspects that are related to the evaluation, acquisition and management of the project management services.


Subsector : A99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 83000720/0001 Project EstablishedICS : 03.080.01, 03.080.30, 03.120.10National Ref : U83000720Title : Services for relationship with the customer, the consumer and the citizen, through

contact centers - Operational requirements for the applicationScope : This standard gives reference indicators of the service requirements given by contact

centers, as per annexes A and B of EN 15838, to grant an objective evaluation of the quality level of the services, regardless model organization or technology. Additional requirements are proposed to apply the general recommendations of EN 15838, where specific indicators have not been defined in that standard. This standard is addressed to the contact centers and can be used by internal or external customers during design, agreement, qualification and verification of the service.

Relatedness :National : REV/AMD UNI 11200:2006

Subsector : A99 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 83000730/0001 Project EstablishedICS : 03.060National Ref : U83000730Title : Guidelines to choose a personal financial planner foreseen by UNI ISO 22222Scope : This TR gives a guidance to allow a development of instruments and communication

models that can help the consumers to make a proper choice of a personal financial planner in line with their aims and considering the required service.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION.

Subsector : B01 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022958/0001 Project EstablishedICS :National Ref : ÖNORM F 3012Title : Electroacoustical alerting systems (SAS)Scope : This ÖNORM defines minimuim requirements for electroacoustical systems (SAS) and

regulates the coaction of all components to a SAS. All single components have to fulfill their relevant standards. To those components, to which no relevant standards exist, has to fulfill the requirments of clause 4. A comletion of the requirements of the individual components does not mean directly that the requirments of this ÖNORM are met when they are connected. The requirements within the scope of this ÖNORM applys on all connections of single components of SAS, which are dedicated, to manage people or to reduce evacuation times by a systematic use of messages within the protected area. Peripheral equipment has to be connected reactionless, if there are no specifications defined in this ÖNORM.


Subsector : B01 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095115/0001 Project EstablishedICS : 13.220.20, 91.060.50National Ref : prEVS 871Title : Fire safety and emergency exit doors and door hardware - UseScope : This standard specifies requirements for fire safety and emergency exit doors and door

hardware use in buildings.

Relatedness :National : REV/AMD EVS 871:2003

Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100720/0001 Project EstablishedICS :National Ref : 03100720Title : Command and control appliances - Part 2: Command and control car ELW 1


Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100721/0001 Project EstablishedICS :

National Ref : 03100721Title : Command and control appliances - Part 3: Command and control car ELW 2


Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100722/0001 Project EstablishedICS :National Ref : 03100722Title : Command and control appliances - Part 5: Command car KdoW


Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100725/0001 Project EstablishedICS :National Ref : 03100725Title : Lines for fire-brigades - Requirements, test methods, maintenance; Amendment A1


Subsector : B01 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 70001470/0001 Project EstablishedICS : 13.220.10National Ref : U70001470Title : Fire fighting equipment - Fire extinguishers - MaintenanceScope : This standard specifies the criteria for surveillance, control, revision and testing of fire

extinguishers in order to guarantee their operational efficiency.


Subsector : B01 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 70001490/0001 Project EstablishedICS : 13.220.20National Ref : U70001490Title : Initial verification and maintenance of automatic fire detection and fire alarm systemsScope : This standard describes the procedures for initial verification, surveillance, regular control

and maintenance of automatic fire detection and fire alarm systems.

Relatedness :

National : REV/AMD UNI 11224:2007

Subsector : B01 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 70001510/0001 Project EstablishedICS : 13.220.20National Ref : U70001510Title : Automatic sprinkler systems - Interpretations related to EN 12845Scope : This technical report provides a collection of interpretations related to the application of

EN 12845.


Subsector : B01 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610946/0001 Draft for public enquiryICS : 13.220.01, 13.220.20National Ref : prNBN S 21-208-2/A1Title : Fire protection in buildings - Design and calculation of smoke and heat extraction

installations - Part 2: Covered car parking buildings

Relatedness :National : REV/AMD NBN S 21-208-2


Subsector B02: STRUCTURES.

Subsector : B02 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-22Country : Switzerland Latest Date for Comments : 2010-04-23Project ID : 0CH00005/0001 Draft for public enquiryICS : 91.060.20National Ref : SIA 232/1Title : Bent roofs

Relatedness :National : REV/AMD SIA 232 (2000)

Subsector : B02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 73032330/0001 Project EstablishedICS : 53.080National Ref : U73032330Title : Metallic storage systems - Design of static steel pallet racks under seismic conditionsScope : This Technical Specification gives rules for the seismic design of steel static pallet racks. In

particular, information are given about the racks specific behaviour under seismic conditions, considering the state of the art of technical knowledge and the development of

Scope : still ongoing European researches, in order to guarantee to the final users a well defined safety level.


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2007-09-20Country : Belgium Latest Date for Comments : 2007-12-15Project ID : BE608873/0001 Draft for public enquiryICS : 91.080.40National Ref : prNBN EN 1992-1-1 ANBTitle : Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for

buildings

Relatedness :National : REV/AMD EN 1992-1-1

Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610884/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1993-1-3 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-3 : General rules - Supplementary rules

for cold-formed members and sheeting - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610885/0001 Draft for public enquiryICS : 91.040.01, 91.080.10National Ref : prNBN EN 1993-1-4 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-4 : General rules - Supplementary rules

for stainless steels - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610886/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-1-5 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-5 : Plated structural elements - National

annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610887/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-1-7 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-7 : Plated structures subject to out of

plane loading - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610888/0001 Draft for public enquiryICS : 91.010.30, 91.080.10, 93.040National Ref : prNBN EN 1993-2 ANBTitle : Eurocode 3 - Design of steel structures - Part 2 : Steel bridges - National annex

Relatedness :National : REV/AMD EN 1993-2

Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610889/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-3-1 ANBTitle : Eurocode 3 - Design of steel structures - Part 3-1 : Towers, masts and chimneys -

Towers and masts - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610890/0001 Draft for public enquiryICS : 65.040.20, 91.010.30, 91.080.10National Ref : prNBN EN 1993-4-1 ANBTitle : Eurocode 3 - Design of steel structures - Part 4-1 : Silos - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610891/0001 Draft for public enquiry

ICS : 23.020.01, 91.010.30, 91.080.10National Ref : prNBN EN 1993-4-2 ANBTitle : Eurocode 3 - Design of steel structures - Part 4-2 : Tanks - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610892/0001 Draft for public enquiryICS : 23.040.01, 91.010.30, 91.080.10National Ref : prNBN EN 1993-4-3 ANBTitle : Eurocode 3 - Design of steel structures - Part 4-3 : Pipelines - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610893/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-5 ANBTitle : Eurocode 3 - Design of steel structures - Part 5 : Pilling - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-31Country : Belgium Latest Date for Comments : 2010-06-30

Project ID : BE610894/0001Draft for public

enquiry

ICS :91.010.30, 91.080.10, 91.080.40, 93.040

National Ref : prNBN EN 1994-2 ANBTitle : Eurocode 4 - Design of composite steen and concrete structures - Part 2 : General rules

and rules for bridges - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610936/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-1-6 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-6 : Strength and stability of shell

structures - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610937/0001 Draft for public enquiryICS : 91.010.30, 91.060.40, 91.080.10National Ref : prNBN EN 1993-3-2 ANBTitle : Eurocode 3 - Design of steel structures - Part 3-2 : Towers, matsts and chimneys -

Chimneys - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-31Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610938/0001 Draft for public enquiryICS : 53.020.20, 91.010.30, 91.080.10National Ref : prNBN EN 1993-6 ANBTitle : Eurocode 3 - Design of steel structures - Part 6 : Crane supporting structures - National

annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610942/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1991-3 ANBTitle : Eurocode 1 - Actions on structures - Part 3 : Actions induced by cranes and machinery -

National annex


Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610943/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1991-4 ANBTitle : Eurocode 1 - Actions on structures - Part 4 : Silos and tanks - National annex


Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056024/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1990:2003/A1:2006/prNATitle : Eurocode - Basis of structural design - Amendment A1 - National AnnexScope : BDS EN 1990/A1/prNA establishes national determined parameters for design of structures

according BDS EN 1990/A1 in Bulgaria.

Relatedness :National : REV/AMD BDS EN 1990:2003/A1:2006

Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056025/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-1-3:2006/prNATitle : Eurocode 1: Actions on structures – Part 1-3: General actions – Snow loads - National

AnnexScope : BDS EN 1991-1-3/prNA establishes national determined parameters for design of structures

according BDS EN 1991-1-3 in Bulgaria.

Relatedness :National : REV/AMD BDS EN 1991-1-3:2006

Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056026/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-1-4:2005/prNATitle : Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions - National

AnnexScope : BDS EN 1991-1-4/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056027/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-1-7:2006/prNATitle : Eurocode 1: Actions on structures – Part 1-7: General actions – Accidental actions -

National AnnexScope : BDS EN 1991-1-7/prNA establishes national determined parameters for design of structures


Relatedness :

National : REV/AMD BDS EN 1991-1-7:2006

Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056028/0001 Draft for public enquiryICS : 91.010.30, 93.040National Ref : BDS EN 1991-2:2006/prNATitle : Eurocode 1: Actions on structures – Part 2: Traffic loads on bridges - National AnnexScope : BDS EN 1991-2/prNA establishes national determined parameters for design of structures

according BDS EN 1991-2 in Bulgaria.

Relatedness :National : REV/AMD BDS EN 1991-2:2006

Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056029/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-3:2006/prNATitle : Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery -

National AnnexScope : BDS EN 1991-3/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056030/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-4:2006/prNATitle : Eurocode 1 - Actions on structures - Part 4: Silos and tanks - National AnnexScope : BDS EN 1991-4/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056031/0001 Draft for public enquiryICS : 13.220.50, 91.010.30, 91.080.40National Ref : BDS EN 1992-1-2:2005/prNATitle : Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire

design - National AnnexScope : BDS EN 1992-1-2/prNA establishes national determined parameters for design of structures

Scope : according BDS EN 1992-1-2 in Bulgaria.


Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056032/0001 Draft for public enquiryICS : 91.010.30, 91.080.40, 93.040National Ref : BDS EN 1992-2:2006/prNATitle : Eurocode 2: Design of concrete structures - Part 2: Concrete bridges – Design and

detailing rules - National AnnexScope : BDS EN 1992-2/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056033/0001 Draft for public enquiryICS : 91.010.30, 91.080.40National Ref : BDS EN 1992-3:2006/prNATitle : Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment

structures - National AnnexScope : BDS EN 1992-3/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056034/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1993-1-3:2007/prNATitle : Eurocode 3: Design of steel structures - Part 1-3: General rules – Supplementary rules

for cold-formed members and sheeting - National AnnexScope : BDS EN 1993-1-3/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056035/0001 Draft for public enquiryICS : 91.040.01, 91.080.10

National Ref : BDS EN 1993-1-4:2007/prNATitle : Eurocode 3: Design of steel structures – Part 1-4: General rules – Supplementary rules

for stainless steels - National AnnexScope : BDS EN 1993-1-4/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056036/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1993-1-6:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell

Structures - National AnnexScope : BDS EN 1993-1-6/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056037/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1993-1-7:2006/prNATitle : Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of

plane loading - National AnnexScope : BDS EN 1993-1-7/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056038/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1993-1-12:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of

EN 1993 up to steel grades S 700 - National AnnexScope : BDS EN 1993-1-12/prNA establishes national determined parameters for design of

structures according BDS EN 1993-1-12 in Bulgaria.


Subsector : B02 Registration Date : 2010-02-09

Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056039/0001 Draft for public enquiryICS : 91.010.30, 91.080.10, 93.040National Ref : BDS EN 1993-2:2007/prNATitle : Eurocode 3: Design of steel structures - Part 2: Steel bridges - National AnnexScope : BDS EN 1993-2/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056040/0001 Draft for public enquiryICS : 65.040.20, 91.010.30, 91.080.10National Ref : BDS EN 1993-4-1:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 4-1: Silos - National AnnexScope : BDS EN 1993-4-1/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056041/0001 Draft for public enquiryICS : 23.020.01, 91.010.30, 91.080.10National Ref : BDS EN 1993-4-2:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 4-2: Tanks - National AnnexScope : BDS EN 1993-4-2/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056042/0001 Draft for public enquiryICS : 23.020.01, 91.010.30, 91.080.10National Ref : BDS EN 1993-4-3:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 4-3: Pipelines - National AnnexScope : BDS EN 1993-4-3/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056043/0001 Draft for public enquiryICS : 13.220.50, 91.010.30, 91.080.30National Ref : BDS EN 1996-1-2:2005/prNATitle : Eurocode 6: Design of masonry structures - Part 1-2: General rules – Structural fire

design - National AnnexScope : BDS EN 1996-1-2/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056044/0001 Draft for public enquiryICS : 91.010.30, 91.080.30National Ref : BDS EN 1996-2:2006/prNATitle : Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of

materials and execution of masonry - National AnnexScope : BDS EN 1996-2/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056045/0001 Draft for public enquiryICS : 91.010.30, 91.080.30National Ref : BDS EN 1996-3:2006/prNATitle : Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for

unreinforced masonry structures - National AnnexScope : BDS EN 1996-3/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056046/0001 Draft for public enquiryICS : 91.120.25, 93.040National Ref : BDS EN 1998-2:2006/prNATitle : Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National

AnnexScope : BDS EN 1998-2/prNA establishes national determined parameters for design of structures


Relatedness :

National : REV/AMD BDS EN 1998-2:2006

Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056047/0001 Draft for public enquiryICS : 91.120.25National Ref : BDS EN 1998-4:2006/prNATitle : Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and

pipelines - National AnnexScope : BDS EN 1998-4/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056048/0001 Draft for public enquiryICS : 91.120.25National Ref : BDS EN 1998-6:2005/prNATitle : Eurocode 8: Design of structures for earthquake resistance – Part 6: Towers, masts and

chimneys - National AnnexScope : BDS EN 1998-6/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056049/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1999-1-1:2007/prNATitle : Eurocode 9 - Design of aluminium structures - Part 1-1: General structural rules -

National AnnexScope : BDS EN 1999-1-1/prNA establishes national determined parameters for design of structures



Subsector : B02 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10003/0001 Project EstablishedICS : 91.010.20National Ref : prNS 8401Title : General conditions of contract for design commissionsScope : The standard has been prepared for use in a contractual relationship between the

Scope : contractor and the architect or the engineer who carries out the design of the building


Subsector : B02 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10004/0001 Project EstablishedICS : 91.010.20National Ref : prNS 8402Title : General conditions for consultancy commissions with remuneration on the basis of

actual time takenScope : The standard has been prepared for use in a contractual relationship between the

contractor and the consultant with remuneration on the basis of actual time taken



Subsector B03: CONCRETE.

Subsector : B03 Registration Date : 2010-02-11Organization : SUTNCountry : SlovakiaProject ID : 73001010/0001 Project EstablishedICS : 91.200, 93.020National Ref : STN 73 0090Title : Foundations. Geologic investigation for civil engineeringScope : STN 73 0090 is non-contradictory complementary national standard to assist the user in

Slovakia to apply Eurocode 7, Part 2. This standard will be reference document to National Annex to Eurocode 7-2, STN EN 1990/NA. The scope of this standard is to give more detailed information for geotechnical investigation than recommendations in Annex B, EN 1997-2 in accordance with EN 1997.

Relatedness :National : REV/AMD STN 73 0090

Subsector : B03 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG005003/0001 Draft for public enquiryICS : 91.080.40National Ref : BDS EN 13791:2007/prNATitle : Assessment of in-situ compressive strength in structures and precast concrete

components - National AnnexScope : BDS EN 13791/prNA establishes national determined parameters for assessment of in-situ

compressive strength in structures and precast concrete components according BDS EN 13791 in Bulgaria.

Relatedness :National : REV/AMD BDS EN 13791:2007


Subsector B09: THERMAL MATTERS.

Subsector : B09 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095112/0001 Project EstablishedICS : 27.220, 91.120.10National Ref : prEVS 860Title : Thermal insulation of technical equipment - Insulation of pipes, vessels and equipment -

Application of thermal insulationScope : This standard is one part of "Thermal insulation of technical equipment" series, which is

made for engineers, contructors, but also for customers. Standard describes the application of thermal insulation of round ducts, vessels and equipment, where mineral wool is used as insulating material and metal cladding as covering material.


Subsector : B09 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095113/0001 Project EstablishedICS : 27.220, 91.120.10National Ref : prEVS 860-6Title : Thermal insulation of technical equipment - Part 6: Insulation of pipes, vessels and

equipment - Cold InsulationScope : This standard is one part of "Thermal insulation of technical equipment" series, which is

made for engineers, contructors, but also for customers.This standard presents the most essential factors to be observed in the design, application of insulation and choice of materials of cold insulations for piping systems, vessels and equipment.


Subsector : B09 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095114/0001 Project EstablishedICS : 27.220, 91.120.10National Ref : EVS 860-1:2008/prA1Title : Thermal insulation of technical equipment - Part 1: Insulation of pipes, vessels and

equipment - Insulationg materials and elementsScope : This standard is one part of "Thermal insulation of technical equipment" series, which is

made for engineers, contructors, but also for customers.This standard describes the basic information needed for the planning and implementation of insulation.

Relatedness :National : REV/AMD EVS 860-1:2008


Subsector B10: TIMBER STRUCTURES.

Subsector : B10 Registration Date : 2010-02-26Organization : NSAICountry : IrelandProject ID : 01078868/0001 Project EstablishedICS : 79.040National Ref : I.S. 127Title : Structural timber - visual strength grading - Sawn softwoods with rectangular cross-

sectionScope : Standard will specify a method of visually strength grading structural softwood timber.

Relatedness :National : REV/AMD I.S. 127


Subsector B12: MASONRY.

Subsector : B12 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167337/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-2/A1Title : Building works - Small mansonry unit walls - Partitions and walls - Part 1-2 : General

criteria for selection of materials


Subsector : B12 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167338/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-1/A1Title : Building works - Small mansonry unit walls - Partitions and walls - Part 1-1 : Contract bill

of technical model clauses



Subsector B14: GEOTECHNICS.

Subsector : B14 Registration Date : 2010-02-01Organization : BSI Draft Issue Date : 2010-01-27Country : United Kingdom Latest Date for Comments : 2010-03-31Project ID : 00903054/0001 Draft for public enquiryICS :National Ref : BS 22475-2Title : Geotechnical investigation and testing. Sampling methods and groundwater

measurements. Part 2. Qualification criteria for enterprises and personnel



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY.

Subsector : B17 Registration Date : 2010-02-22Organization : UNI Draft Issue Date : 2010-01-28Country : Italy Latest Date for Comments : 2010-03-11Project ID : 29000400/0001 Project EstablishedICS : 17.180.20National Ref : U29000400Title : Light and lighting - Protocol for the measurement of LED luminaires photometric dataScope : The standard gives the general principles for the measure of characteristic photometric

data of luminaire using the technology to LED and of modules LED.



Subsector B18: SCAFFOLDING.

Subsector : B18 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000129/0001 Project EstablishedICS :National Ref : BS 8539Title : Code of practice for the design and installation of anchors for safety-critical applications


Subsector : B18 Registration Date : 2010-02-19Organization : MSZTCountry : HungaryProject ID : 34831508/0001 Project EstablishedICS : 91.220National Ref :Title : On-site inspection of scaffolding system used in construction industry

Relatedness :National : REV/AMD MSZ 17177:2010

Subsector : B18 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-20Project ID : P0034169/0002 Draft for public enquiryICS :National Ref : PNE 180401Title : Load and unload platforms for construction sites. Product specifications and test

methodsScope : This Standard defines platforms, temporally fixed, used in the construction sites to load and

Scope : unload materials.



Subsector B20: DRAINAGE EQUIPMENT.

Subsector : B20 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022994/0001 Project EstablishedICS :National Ref : ÖNORM B 5101/ATitle : Separator systems for light liquids (e.g. oil and petrol) - Supplementary requirements to

ÖNORMEN EN 858-1 and -2, procedure for the proof of conformity - AmendmentScope : The Amendment A contains information which is esteemed to be necessary for drawing

attention upon the fact that the European Biofuel Directive may have influence upon light liquids separation systems. The efficiency of light liquids separation systems conforming to ÖNORM EN 858-1 or the ÖNORM B 5101 respectively may be reduced by the admixture of biofuels.


Subsector : B20 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167569/0001 Project EstablishedICS :National Ref : NF DTU 64.1 P2Title : Installation of private (independent) sewerage systems - Private duvelling houses

comprising up to 10 rooms - Part 2: Design


Subsector : B20 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167570/0001 Project EstablishedICS :National Ref : NF DTU 64.1 P1-2Title : Installation of private (independent) sewerage systems - Private duvelling houses

comprising up to 10 rooms - Part 1-2 : general criteria for selecting materials


Subsector : B20 Registration Date : 2010-02-25Organization : AFNOR

Country : FranceProject ID : FA167571/0001 Project EstablishedICS :National Ref : NF DTU 64.1 P1-1Title : Installation of private (independent) sewerage systems - Private duvelling houses

comprising up to 10 rooms - Part 1-1 : contract dill of technical requirements



Subsector B22: WALLCOVERINGS.

Subsector : B22 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-22Country : Switzerland Latest Date for Comments : 2010-04-23Project ID : 0CH00006/0001 Draft for public enquiryICS : 91.060.10National Ref : SIA 232/2Title : External walls with claddings ventilated at rear

Relatedness :National : REV/AMD SIA 233 (2000)


Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT.

Subsector : B25 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 01069080/0001 Project EstablishedICS : 23.060.40National Ref : E01069080Title : Gas pressure regulating installations for inlet max pressure of 12 bar for industrial,

similar and domestic use with downstream pressure between 0,04 and 0,5 barScope : The Standard specifies the criteria for the design, construction and testing of gas pressure

regulating and measurement of gas used for industrial use, without restriction of pressure and for civil use with downstream pressure more than 0,04 and not more 0,5 bar.


Subsector : B25 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 01069090/0001 Project EstablishedICS : 23.060.40National Ref : E01069090Title : Gas pressure regulating installations for inlet pressure between 0,04 and 12 bar -

Operation and maintenanceScope : The standard specifies the criteria for the operation and maintenance of installations for

the reduction of gas pressure in order to ensure their proper functioning. It does not apply to sub-assemblies and plant components such as electrical devices, remote control device.



Subsector B26: ROAD BUILDING AND MAINTENANCE.

Subsector : B26 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-25Country : Switzerland Latest Date for Comments : 2010-04-15Project ID : 0CH00008/0001 Draft for public enquiryICS : 93.080.01National Ref : SN 507701cTitle : General conditions for roads and traffic


Subsector : B26 Registration Date : 2010-02-24Organization : SUTNCountry : SlovakiaProject ID : 73001210/0001 Project EstablishedICS : 19.060, 93.080.10National Ref : STN 73 6192Title : Shock load test of flexible pavements and subgradesScope : Static and dynamic load tests of road pavements and subgrade. Parts: diagnostic equipment

and parameter, test procedure, records and evaluation


Subsector : B26 Registration Date : 2010-02-05Organization : SNV Draft Issue Date : 2010-01-02Country : Switzerland Latest Date for Comments : 2010-03-12Project ID : CH100002/0001 Draft for public enquiryICS : 93.080.30National Ref : SN 640696Title : Fauna and traffic; Waters passages, organization measures


Subsector : B26 Registration Date : 2010-02-18Organization : SNV Draft Issue Date : 2010-02-17Country : Switzerland Latest Date for Comments : 2010-03-15Project ID : CH100003/0001 Draft for public enquiryICS : 93.080.20National Ref : SN 640735bTitle : Conservation of concrete slabs, repair and maintenance

Relatedness :National : REV/AMD SN 640735a (1996)


Subsector B27: WATERPROOFING MATERIALS.

Subsector : B27 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-17Country : Switzerland Latest Date for Comments : 2010-04-15Project ID : 0CH00004/0001 Draft for public enquiryICS : 91.100.50National Ref : SIA 281/2Title : Sealing sheets and liquid applied sealings, peeling tensile testing

Relatedness :National : REV/AMD SIA 281/2 (1999)

Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA166216/0001 Project EstablishedICS :National Ref : PR NF P31-302/A1Title : Clay roofing tiles and fittings - Product definitions and specifications

Relatedness :National : REV/AMD NF EN 1304:200508 (P31-302)

Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA166217/0001 Project EstablishedICS :National Ref : PR NF P31-308-2/A1Title : Clay roofing tiles for discontinuous laying - Determination of physical characteristics -

Part 2 : test for frost resistance

Relatedness :National : REV/AMD NF EN 539-2:200609 (P31-308-2)

Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167339/0001 Project EstablishedICS :National Ref : PR NF DTU 44.1 P2Title : Building work - Sealing joint front by implementation of sealants - Part 2 : Contract bill of

special administrative model clauses


Subsector : B27 Registration Date : 2010-02-25

Organization : AFNORCountry : FranceProject ID : FA167340/0001 Project EstablishedICS :National Ref : PR NF DTU 44.1 P1-2Title : Building works - Sealing joint front by implementation of sealants- Part 1-2 : General

criteria for selection of materials


Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167341/0001 Project EstablishedICS :National Ref : PR NF DTU 44.1 P1-1Title : Building works - Sealing joint front by implementation of sealants- Part 1-1 : Contract bill

of technical model clauses


Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167343/0001 Project EstablishedICS :National Ref : PR NF P31-203-1/A3Title : Building work - Roof covering made of clay flat interlocking tiles - Part 1 : Technical

specifications


Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167344/0001 Project EstablishedICS :National Ref : PR NF P31-202-1/A3Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 1 : Contract

bill of technical clauses


Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167345/0001 Project EstablishedICS :

National Ref : PR NF P31-201-1/A4Title : Building works - Roof covering made from hollow terracotta tiles - Part 1-: Contract bill of

technical clauses



Subsector B31: HEATING SYSTEMS IN BUILDINGS.

Subsector : B31 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 0204A071/0001 Project EstablishedICS : 91.140.10National Ref : E0204A071Title : Cogeneration - Micro and small-scale cogeneration units fed with liquid and gaseous

fuels - Part 1: Exhaust emission measurementScope : The standard specifies the principles, criteria and modes to define procedures, instruments

and test cycles for test bench measurement of exhaust emissions from prime mover in stationary conditions and to determine weighted specific-emission values for any air pollutant emitted.



fuels - Part 2: Determination of airborne noise by enveloping surface methodScope : The standard specifies the principles, criteria and operating conditions to assess airborne

noise emissions from micro and small-scale cogeneration units, by applying UNI EN ISO 3744.



fuels - Part 3: Ex-ante measurement of energy performancesScope : The standard describes a method for the ex-ante measurement of the energy performances

of micro and small-scale cogeneration units by means of experimental tests carried out in an independent laboratory.

Relatedness :

National : REV/AMD


fuels - Part 4: Requirements for installation and putting into serviceScope : This standard specifies the requirements for combustion air adduction, ventilation and flue

gases evacuation systems, cooling systems, fuel-feeding systems, characteristics of the thermal recovery circuit; the standard specifies also the requirements for putting into service the units.


Subsector : B31 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0208B690/0001 Project EstablishedICS : 17.200.10, 91.140.10National Ref : E0208B690Title : Centralized heating system - Heating costs sharingScope : This standard specifies heating costs sharing for centralized heating system with or without

heat measuring devices.

Relatedness :National : REV/AMD UNI 10200:2005, UNI 9901:1987


Subsector B99: UNDETERMINED.

Subsector : B99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 00515212/0001 Project EstablishedICS :National Ref : 00515212Title : Subsoil.


Subsector : B99 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01000036/0001 Project EstablishedICS :

National Ref : BS XXXXTitle : Water sampling for buildings. Heating and chilled water systems




Organization : BSICountry : United KingdomProject ID : 01000129/0001 Project EstablishedICS :National Ref : BS 8539Title : Code of practice for the design and installation of anchors for safety-critical applications




Organization : BSICountry : United KingdomProject ID : 01000259/0001 Project EstablishedICS :National Ref : BS 8905Title : Guidance on the sustainable use of materials


Subsector : B99 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-22Country : Switzerland Latest Date for Comments : 2010-04-23Project ID : 0CH00007/0001 Draft for public enquiryICS : 91.060.01National Ref : SIA 118/232Title : General conditions for bent roofs and for external walls with claddings ventilated at rear

- Contract terms for standards SIA 232/1 and 232/2


Subsector : B99 Registration Date : 2010-02-03Organization : NENCountry : NetherlandsProject ID : 50001508/0001 Project EstablishedICS : 91.120.10, 91.140.30National Ref : NVN 7125:2009 Concept nlTitle : Energy performance standard for measurements Scope : This standard gives term, definitions and the method to determine the indicator of energy

performance of a building. In this general part general calculation rules are given, based on

Scope : the European standards drawn up by the European Committee for a mandate for the energy performance directive of buildings (EPBD). In different part application rules are given for house-building versus non-residential building and new estate versus existing works.


Subsector : B99 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 87004990/0001 Project EstablishedICS : 91.100.01National Ref : U87004990Title : Determination of the degradation of nitrogen oxides in the air by inorganic photocatalytic

materials: continuous flow test methodScope : This standard describes a method aimed at assessing the index of photocatalytic abatement

for nitrogen oxides NOX (NO+NO2) occurring in the source gas, due to the action of inorganic materials present in cementitious and/or lime or ceramic matrices. The adimensional photocatalytic abatement index, obtained by applying the methodology described herein, refers only to the test conditions reported in this standard with the purpose of making comparisons among the activities of various products and does not constitute a physical measurement of the photocatalytic activity that can be used to forecast or estimate the absolute nitrogen oxides abatement effect of the applied product.




Organization : SNCountry : NorwayProject ID : NOT10001/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3424Title : Condition survey of construction works - Contents and executionScope : This standard specifies requirements of a condition assessment of construction works (or

parts of it) and can be used for buildings, bridges, tunnels or other construction works. It describes and defines different levels of survey , condition classes and consequence classes.




Organization : SNCountry : NorwayProject ID : NOT10002/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3600Title : Documentation requirements for condition assessment of houses in case of sales Scope : This standard specifies minimum requirements of a condition assessment of houses in case

Scope : of a sales situation.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 59017240/0001 Project EstablishedICS : 67.260National Ref : U59017240Title : Food industry environment - Insect monitoring systemsScope : This standard specifies a method to plan and realize insect monitoring systems in food

industry environment in order to take actions and strategies of fight against insects.


Subsector : C01 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10005/0001 Project EstablishedICS : 67.120.30National Ref : prNS 9413Title : Fish and fish products - Norwegian Wetsalted Cod - Requirements on qualityScope : This standard specifies quality requirements on Norwegian wetsalted cod and wetsalted

filet of cod.



Subsector C02: PAINTS AND RELATED PRODUCTS.

Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O030/0001 Project EstablishedICS : 87.040National Ref : E0910O030Title : Paint and varnishes - Determination of pigment volume concentrationScope : Specifies a procedure for the determination of pigment volume concentration.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O040/0001 Project EstablishedICS : 87.060.10National Ref : E0910O040Title : Pigments and extenders for paints and varnishes - Comparative evaluation of solvents

resistanceScope : Specifies a procedure for solvent resistance comparison with standard reference of same

characteristics. It is applicable to all coloured and dark pigment.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O050/0001 Project EstablishedICS : 87.040National Ref : E0910O050Title : Paint and varnishes - Tin stability of thixotropic polyesters for wood and wood substrates

at different temperaturesScope : Specifies a procedure for the determination of tin stability of thixotropic polyesters for

wood and wood substrates at different temperatures.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O060/0001 Project EstablishedICS : 87.040National Ref : E0910O060Title : Paints and varnishes - Thermosetting powder coatings - Test methodsScope : Specifies methods for measuring of characteristics of thermosetting powder paints, both as

powder and as coatings of applied and cured paints.


Subsector : C02 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910O070/0001 Project EstablishedICS : 87.040National Ref : E0910O070Title : Paints and varnishes - Determination of the abrasion resistance by "TABER" apparatusScope : Specifies a procedure for measuring of abrasion resistance of paint films by "TABER"

apparatus. This standard is not suitable for paints which hardness is under 15 s.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O080/0001 Project EstablishedICS : 87.040National Ref : E0910O080Title : Paints and varnishes - Emulsion paints for interior masonry - Wet scrub resistance -

Brush method

Scope : This standard specifies a procedure for the determination of water and detergents wet scrub resistance of an emulsion paint for interior masonry.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O090/0001 Project EstablishedICS : 87.020National Ref : E0910O090Title : Paint and varnishes - Paints and varnishes - Polymeric painted subtracts for building -

Test methodsScope : This standard specifies test methods for organic coatings, with or without pigments, applied

on polymeric substrates for building.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O120/0001 Project EstablishedICS : 87.040National Ref : E0910O120Title : Paint and varnishes - Determination of the hardness - Pencil testScope : This standard specifies a procedure for hardness determination by scratching of painted

surface using a pencil of certain hardness.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O130/0001 Project EstablishedICS : 87.040National Ref : E0910O130Title : Paint and varnishes - Wall paints for interiors, white or light coloured - Determination of

dirt pick-upScope : This standard specifies a procedure to estimate the tendency of a mural paint film to

absorbe very fine pigment particles. This value is meant to be a guide of tendency of applied paint to absorbe dust and other impurities settled on surface and therefore get dirty.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : Italy

Project ID : 0910O140/0001 Project EstablishedICS : 87.040National Ref : E0910O140Title : Paint and varnishes - Emulsion paints - Check of film formation at a fixed temperatureScope : This standard specifies a procedure to check if at a fixed temperature the paint makes a

continuous and free from craking film. This check has the purpose both to determine the minimum environmental condition of application of tested paint, and to know how many degrees over the minimun temperature the application is carried out.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O150/0001 Project EstablishedICS : 87.040National Ref : E0910O150Title : Paint and varnishes - Emulsion paints for interiors - Assessment of application and

recoatibily characteristicsScope : This standard specifies a procedure to assess the facility of application and recoatibility

characteristics of emulsion mural paints.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O160/0001 Project EstablishedICS : 87.040National Ref : E0910O160Title : Paint and varnishes - Emulsion paints for interiors - Important characteristics for

comparative or no-comparative testsScope : This standard specifies the characteristics and test methods for emulsion paints for

interiors. These characteristics are important both for the use by consumer and for comparative tests according to UNI CEI 70027.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O170/0001 Project EstablishedICS : 87.100National Ref : E0910O170Title : Paint and varnishes - Coating material and coatings systems for rooms with the

presence of foodstuff - Requirements and test methodsScope : This standard specifies requirements and relative test methods of paints and varnishes

suitable for walls and ceilings of rooms containing food.

Relatedness :


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O210/0001 Project EstablishedICS : 87.020National Ref : E0910O210Title : Wrapping coatings for asbestos-cement sheets - Requirements and test methodsScope : This standard specifies the requirements, test methods and criteria of acceptability of

wrapping coatings for asbestos-cement flat or corrugated slabs, designed to prevent asbestos fibre dispersion in the environment. This standard is applicable also to coatings of general fibro-cement flat or corrugated slabs, having decorative or protective aim.


Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O220/0001 Project EstablishedICS : 87.020National Ref : E0910O220Title : Wrapping coatings for asbestos-cement sheets - Assessment of the wrapping coating

feasibility to asbestos-cement productScope : This standard specifies the criteria to verify if a wrapping coating, complying to UNI 10686,

gives a suitable adhesion to a specific surface of a product, made of plane or corrugated asbestos-cement sheets setted-up in deterioration conditions as they are. This standard is suitable also for wrapping coatings for products made of any type of plane or corrugated fibro-cement sheets.


Subsector : C02 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167055/0001 Project EstablishedICS :National Ref : PR NF T36-005Title : Paints and varnishes Characterization of coating materials

Relatedness :National : REV/AMD NF T36-005:198909 (T36-005)


Subsector C03: CHEMISTRY.

Subsector : C03 (Secondary Subsector)


Organization : DIN

Country : GermanyProject ID : 06233413/0001 Project EstablishedICS :National Ref : 06233413Title : Testing of carbonaceous materials - Determination of bulk density by buoyancy method

and the open porosity by impregnation with water - Solid materials


Subsector : C03 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-10Project ID : P0033804/0002 Draft for public enquiryICS :National Ref : PNE 84742Title : Cosmetic raw materials. Sunscreens. Determination of mercury in titanium dioxide by

atomic absorption spectrometryScope : This standard establishes a method for the determination of mercury in titanium dioxide

for cosmetic use.



Subsector C13: FERTILIZERS.

Subsector : C13 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00023014/0001 Project EstablishedICS :National Ref : ÖNORM S 2202-2Title : Guidelines for application of compost - Part 2: Agricultural applicationsScope : In the present ÖNORM the application of compost to the grades A+ and A on soils with the

following agricultural and forestry uses are identified: agriculture, grassland, garden and field vegetable production, viticulture, orchards, hop, forest.


Subsector : C13 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O180/0001 Project EstablishedICS : 65.080, 71.040.40National Ref : E0910O180Title : Fertilizers - Analytical methods - Determination of cadmium, chromium, copper, nickel,

lead and zinc - Extraction with DTPA (Diethilentriaminoacetic acid) methodScope : This Standard specifies a method for the determination of cadmium, chromium, copper,

nickel, lead and zinc extractable from fertilizers with a solution of DTPA at pH 7,3.

Relatedness :


Subsector : C13 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O190/0001 Project EstablishedICS : 65.080, 71.040.40National Ref : E0910O190Title : Fertilizers - Analytical methods - Determination of organic carbon of biological origin

extractable with water and pyrosphosphateScope : This Standard specifies a method for the determination of organic carbon of biological

origin present in fertilizer products extractable with water and pyrophosphate.


Subsector : C13 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O200/0001 Project EstablishedICS : 65.080, 71.040.40National Ref : E0910O200Title : Fertilizers - Analytical methods - Determination of organic carbon according to Springer-

Klee - Titrimetric methodScope : This standard specifies a titrimetric method for the determination of the biological origin

carbon.This standard does not apply for fertilizers (organic and organomineral fertilizer and organic soil improvers) which contain slow release products (urea condensates).



Subsector C18: ADHESIVES

Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N470/0001 Project EstablishedICS : 83.180National Ref : E0910N470Title : Adhesives - Determination of total nitrogen contentScope : This standard defines a method for the determination of total nitrogen contained in

adhesives. It applies to all nitrogen containing adhesives, excluded those containing nitrogroups.


Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : Italy

Project ID : 0910N480/0001 Project EstablishedICS : 83.180National Ref : E0910N480Title : Adhesives - Adhesives - Determination of reactivity of phenolic adhesivesScope : The method is based on the determination of time necessary to reach stage B of phenolic

resins by the use of a hot plate in conventional conditions.


Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N490/0001 Project EstablishedICS : 83.180National Ref : E0910N490Title : Adhesives - Adhesives - Determination of tolerance to dilution with water of amino- and

phenolic-resinsScope : This standard defines a method for the determination of tolerance to dilution with water of

amino- and phenolic-resins; it is applicable to phenolic-, melamine- and urea-melamine-resins for liquid adhesives. It is not applicable to ureic resins for adhesives.


Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N500/0001 Project EstablishedICS : 83.180National Ref : E0910N500Title : Adhesives - Adhesives - Determination of mechanical stability of water dispersionsScope : This standard is based on the quantity of coagulum formed when a dispersion is stirred with

a high speed stirrer. It applies to any dispersion adhesives.


Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N510/0001 Project EstablishedICS : 83.180National Ref : E0910N510Title : Adhesives for paper - Determination of maximum open timeScope : This test method determines the max open time of adhesives for paper and board.


Subsector : C18 Registration Date : 2010-02-16

Organization : UNICountry : ItalyProject ID : 0910N520/0001 Project EstablishedICS : 83.180National Ref : E0910N520Title : Adhesives for paper - Determination of wet way adhesion strengthScope : This test method determines the wet way adhesion strength of adhesives for paper and

board.



Subsector C99: UNDETERMINED.

Subsector : C99 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 42008280/0001 Project EstablishedICS : 71.100.70National Ref : U42008280Title : Cosmetics - Good Manufacturing Practice (GMP) of ingredients used for the

manufacture of cosmetics productsScope : This standard gives a guideline for production, control, packaging and transport of

ingredients used for the manufacture of cosmetics products.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES.

Subsector : F14 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022956/0001 Project EstablishedICS :National Ref : ÖNORM A 1205Title : Testing of prints and printing inks - Resistance to soapsScope : This ÖNORM is to be used exclusively for tests using alkaline soaps. It is applicable for test

prints made according to ÖNORM A 1200-1 and -2 and for test prints which were provided by the producer of the test prints. Sampling is made according to ÖNORM ISO 186.



Subsector F15: MATERIAL TESTING IN GENERAL.

Subsector : F15 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233407/0001 Project EstablishedICS :National Ref : 06233407Title : Ion exchange - Terminology


Subsector : F15 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233422/0001 Project EstablishedICS :National Ref : 06233422Title : Testing of carbon materials; determination of the Mettler softening point; binding and

impregnating materials


Subsector : F15 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233423/0001 Project EstablishedICS :National Ref : 06233423Title : Testing of carbon materials - Determination of dynamic moduls of elasticity by the

resonance method - Solid materials



Subsector F17: ADMINISTRATIVE DOCUMENTS.

Subsector : F17 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04300545/0001 Project EstablishedICS :National Ref : 04300545Title : Electronic Business - Model agreement on invoicing with structured electronic data

interchange (EDI)



Subsector F19: OPTICS.

Subsector : F19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 02702283/0001 Project EstablishedICS :National Ref : 02702283Title : Production in optical engeneering - Indexing of hydrolic expansion chucks



Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK.

Subsector : F21 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022957/0001 Project EstablishedICS :National Ref : ÖNORM A 6760Title : Value Analysis - Management of value analyses-projectsScope : This ÖNORM gives the user of the method a guideline for the preparation and to

accomplish the value analysis task, especially for the planning for the management of value analysis projects. The standards for value analysis and value mangement together with the referenced literature should improve and deepen the holistic understanding of value management.



Subsector F99: UNDETERMINED.

Subsector : F99 Registration Date : 2010-02-01Organization : BSI

Country : United KingdomProject ID : 01000180/0001 Project EstablishedICS :National Ref : BS 8540Title : Service design process. Guide


Subsector : F99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 09500235/0001 Project EstablishedICS :National Ref : 09500235Title : General principles for the safe design of products


Subsector : F99 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 30110600/0001 Project EstablishedICS : 35.240.30National Ref : U30110600Title : Supporting Interoperability in Preservation and Retrieval of digital Objects (SInCRO)Scope : This Standard defines the data elements supporting the "replacement" preservation

process: more precisely, it specifies and supplements some rules of CNIPA's deliberation 19 February 2004, n. 11. It identifies the information elements needed to design the preservation index (the so-called "lock file") and defines their semantics and articulation through the XML formal language. This Standard aims at allowing stakeholders to use a common data structure in order to gain an adequate degree of interoperability along migration processes, thanks to the adoption of the XML Schema provided.


Subsector : F99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 83000690/0001 Project EstablishedICS : 03.080.20National Ref : U83000690Title : Guidelines to use the management consulting to organize, manage and develop the

small enterprisesScope : This document introduces the various possibilities of the management consulting to

support the small enterprises in their organisation, management and development. It is applicable to small enterprises to decide how to buy and to check the supply of process of consultancy. It also applies to the subjects offering this service to adapt it to the small enterprises.

Relatedness :

National : REV/AMD

Subsector : F99 Registration Date : 2010-02-22Organization : UNI Draft Issue Date : 2010-02-01Country : Italy Latest Date for Comments : 2010-03-15Project ID : 83000740/0001 Project EstablishedICS : 03.060National Ref : U83000740Title : Financial education of citizens - Service requirementsScope : This standard gives indication about design, achievement, supply and evaluation of financial

education. This standard establishes terms, objectives, classification, typologies, contents and priorities, modes and minimum requirements in order to fully reach the scope in coherence with UNI ISO 22222 and with the current standardisation activity.


Subsector : F99 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167461/0001 Project EstablishedICS :National Ref : XP X50-052Title : Intelligence Strategic Management



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT.

Subsector : H04 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 11200800/0001 Project EstablishedICS :National Ref : 11200800Title : Slacklines - Functional and safety requirements and test methods


Subsector : H04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 61002590/0001 Project EstablishedICS : 97.220.30National Ref : U61002590Title : Fitness - Requirements, management and technical personnel of fitness centresScope : This standard specifies requirements for fitness centres where fitness practice is done. The

standard consider dedicated spaces to fitness practice, equipment and technical personnel. Moreover the standard give a guidance on management aspects, in particular to organization, emergency and communication/problems management.



Subsector H09: FURNITURE.

Subsector : H09 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167261/0001 Project EstablishedICS :National Ref : PR NF X15-206Title : Laboratory fume cupboards. Threshold for confinement test, installation and

maintenance

Relatedness :National : REV/AMD XP X15-206:200501 (X15-206)


Subsector H18: CENTRAL HEATING BOILERS.

Subsector : H18 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 01519200/0001 Project EstablishedICS : 91.060.40National Ref : E01519200Title : Metal - Chimneys/ flue liners / flue duets - Selection and suitable utilisation according to

Title : the intended use and designationScope : This standard addresses the selection criteria for not flexible metal chimney, flue ducts, flue

liners and for flexible metal flue ducts for relining, according to the correct pairing to appliance considered and installation layout in conformity to UNI EN 1443 and other relevant applicable EN standards.

Relatedness :National : REV/AMD UNI/TS 11278:2008


Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)

Subsector : H33 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167304/0001 Project EstablishedICS :National Ref : PR NF P90-127Title : Construction of Sports facilities - Specifications



Subsector H99: UNDETERMINED.

Subsector : H99 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022934/0001 Project EstablishedICS : 81.040.30National Ref : ONR 191040Title : Bird-safe glass - Testing of efficiencyScope : This ONR specifies a method to test the efficiency of a bird-safe glass. Bird-safe glass in

terms of this ONR are transparent glass and other transparent materials (eg PMMA), which were made visible for birds by certain methods (eg marking) to minimize the collision risk.


Subsector : H99 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022960/0001 Project EstablishedICS :National Ref : ÖNORM S 1008Title : Private keeping of fancy mice Scope : This ÖNORM describes the private keeping of fancy mice (including their keeping e.g. in

kindergartens and pensioners' residences), particularly concerning the condition and equipment of shelters and keeping systems. The objective of this ÖNORM is the optimization of keeping conditions under the aspect of appropriateness to the species.

Relatedness :

National : New

Subsector : H99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04000193/0001 Project EstablishedICS :National Ref : 04000193Title : Equipment for commercial kitchens - Insertion trays - Dimensions


Subsector : H99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04000195/0001 Project EstablishedICS :National Ref : 04000195Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part

2: Commercial coffee machines


Subsector : H99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04000196/0001 Project EstablishedICS :National Ref : 04000196Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part

3: Deep fat fryers



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS.

Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B170/0001 Project EstablishedICS : 21.060.10National Ref : U2404B170Title : Wood screws - Thread and endsScope : This standard defines thread and ends of wood screws with dimensions of thread from

diameters 1,6 to 20 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B180/0001 Project EstablishedICS : 21.060.10National Ref : U2404B180Title : Slotted round head wood screwsScope : This standard specifies the dimensions and the characteristics of slotted round head wood

screws and the nominal diameters from 1,6 to 8 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B190/0001 Project EstablishedICS : 21.060.10National Ref : U2404B190Title : Slotted countersunk (flat) head wood screwsScope : This standard specifies the dimensions and the characteristics of slotted countersunk (flat)

head wood screw and the nominal diameters from 1,6 to 10 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B200/0001 Project EstablishedICS : 21.060.10National Ref : U2404B200Title : Slotted countersunk (oval) head wood screwsScope : This standard specifies the dimensions and the characteristics of slotted countersunk (oval)

head wood screws and the nominal diameters from 1,6 to 8 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B210/0001 Project EstablishedICS : 21.060.10National Ref : U2404B210Title : Hexagon head wood screwsScope : This standard specifies the dimensions and the characteristics of hexagon head wood

screws with nominal diameters from 4 to 20 mm included.


Subsector : I02 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 2404B220/0001 Project EstablishedICS : 21.060.10National Ref : U2404B220Title : Cross recessed pan head wood screwsScope : This standard specifies the dimensions and the characteristics of cross recessed pan head

wood screws and the nominal diameters from 2,5 to 8 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B230/0001 Project EstablishedICS : 21.060.10National Ref : U2404B230Title : Cross recessed countersunk (flat) head wood screwsScope : This standard specifies the dimensions and the characteristics of cross recessed

countersunk (flat) head wood screws and the nominal diameters from 2,5 to 8 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B240/0001 Project EstablishedICS : 21.060.10National Ref : U2404B240Title : Cross recessed countersunk (oval) head wood screwsScope : This standard specifies the dimensions and the characteristics of cross recessed

countersunk (oval) head wood screws and the nominal diameters from 2,5 to 8 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B250/0001 Project EstablishedICS : 21.060.10National Ref : U2404B250Title : Hexagon head tapping screws with collarScope : This standard specifies the dimensions and the characteristics of hexagon head tapping

screws with collar and the nominal diameters from ST 2,9 to ST 8 mm included


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B260/0001 Project EstablishedICS : 21.060.10National Ref : U2404B260Title : Hexagon head drilling screws with tapping screws threadScope : This standard specifies the dimensions and the characteristics of hexagon head drilling

screws with tapping screws thread from ST 2,9 to ST 6,3 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B270/0001 Project EstablishedICS : 21.060.10National Ref : U2404B270Title : Two-thread tapping screws for plastics - Screw thread and endsScope : This standard specifies the thread and ends of two-thread tapping screws for plastics

materials with nominal dimensions of thread from diameters 3 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B280/0001 Project EstablishedICS : 21.060.10National Ref : U2404B280Title : Two-thread tapping screws for plastics - Field of application and core holesScope : This standard defines the diameters of core holes and material thickness for application two

Scope : thread tapping screws for plastic materials. The tapping screws in the present standard are foreseen for application on plastic materials or similar like, for example, alveolar fibrous structure, composite, wood conglomerate, resins, etc.

Relatedness :National : REV/AMD UNI 9703.1990

Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B290/0001 Project EstablishedICS : 21.060.10National Ref : U2404B290Title : Two-thread hexagon head tapping screws for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread exagon head

tapping screws for plastics materials with nominal diameters from 3,5 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B300/0001 Project EstablishedICS : 21.060.10National Ref : U2404B300Title : Two-thread hexagon head tapping screws with collar for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread hexagon head

tapping screws with collar for plastics materials with nominal diameters from 3,5 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B310/0001 Project EstablishedICS : 21.060.10National Ref : U2404B310Title : Two-thread hexagon head tapping screws with large collar for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread hexagon head

tapping screws with large collar for plastics materials with nominal diameters from 3,5 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : Italy

Project ID : 2404B320/0001 Project EstablishedICS : 21.060.10National Ref : U2404B320Title : Two-thread pan head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread pan head

tapping screws with cross recessed for plastics materials with nominal diameters from 3 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B330/0001 Project EstablishedICS : 21.060.10National Ref : U2404B330Title : Two-thread flange pan head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread flange pang

head tapping screws with cross recessed for plastics materials with nominal diameters from 3,5 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B340/0001 Project EstablishedICS : 21.060.10National Ref : U2404B340Title : Two-thread countersunk (flat) head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread countersunk

(flat) head tapping screws with cross recessed for plastics materials with nominal diameters from 3 to 7 mm included.


Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B350/0001 Project EstablishedICS : 21.060.10National Ref : U2404B350Title : Two-thread raised countersunk (oval) head tapping screws with cross recessed for

plastics materialsScope : This standard specifies the dimensions and the characteristics of two-thread raised

countersunk (oval) head tapping screws with cross recessed for plastics materials with nominal diameters from 3 mm to 7 mm included.



Subsector I06: PRESSURE VESSELS.

Subsector : I06 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 0203B442/0001 Project EstablishedICS : 23.020.30, 27.060.30National Ref : E0203B442Title : Pressure equipment - Putting into service and use of pressure equipment and

assemblies - Part 2: Calculations and inspection of pressure components under creep conditions

Scope : The standard specifies the technical prescriptions for the calculations and inspection of pressure components under creep conditions.


Subsector : I06 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 0203B444/0001 Project EstablishedICS : 23.020.30, 27.060.30National Ref : E0203B444Title : Pressure equipment - Putting into service and use of pressure equipment and

assemblies - Part 4: Integrity assessment methods for pressure equipment running under creep conditions

Scope : The standard specifies technical prescriptions for control of pressure equipment running under conditions that may produce creep.



Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY.

Subsector : I15 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167332/0001 Project EstablishedICS :National Ref : PR NF M58-003Title : Hydrogen systems installation



Subsector I19: NUCLEAR ENERGY.

Subsector : I19 Registration Date : 2010-02-15

Organization : ASICountry : AustriaProject ID : 00022959/0001 Project EstablishedICS :National Ref : ÖNORM S 5245Title : Diagnostic reference levels in X-ray diagnostics - Monitoring of the complianceScope : This Austrian Standard provides practical instructions for monitoring the compliance of the

diagnostic reference levels in X-ray diagnostics in due consideration of general legal provisions.


Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233413/0001 Project EstablishedICS :National Ref : 06233413Title : Testing of carbonaceous materials - Determination of bulk density by buoyancy method

and the open porosity by impregnation with water - Solid materials


Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233414/0001 Project EstablishedICS :National Ref : 06233414Title : Terms and definitions of nuclear technology; Part 7: Safety of nuclear installations


Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233415/0001 Project EstablishedICS :National Ref : 06233415Title : Terms and definitions of nuclear technology; Part 8: Radiation


Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233416/0001 Project EstablishedICS :National Ref : 06233416Title : Safety marking in radiation protection



Subsector I36: THERMOPROCESSING TECHNOLOGY.

Subsector : I36 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0207B160/0001 Project EstablishedICS : 13.020.01, 13.100, 13.200National Ref : E0207B160Title : Major hazard process plants - Safety management systems - Guidelines for

implementation of UNI 10617Scope : The Guideline specify the accomplishment modalities for the essential requirements of UNI

10617 and, for each requirement, describes intent, procedures and technical tools needed for the reach of specific targets.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL.

Subsector : M01 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167450/0001 Project EstablishedICS :National Ref : PR NF A35-080-1Title : Reinforcing steel - Weldable steel - Part 1 : bars and coils

Relatedness :National : REV/AMD NF A35-016-1:200711 (A35-016-1), NF A35-019-1:200711 (A35-019-1)

Subsector : M01 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167451/0001 Project EstablishedICS :National Ref : PR NF A35-080-2Title : Reinforcing steel - Weldable steel - Part 2 : welded fabric

Relatedness :National : REV/AMD NF A35-016-2:200711 (A35-016-2), NF A35-019-2:200711 (A35-019-2)


Subsector M03: FOUNDRY TECHNOLOGY, INCLUDING CAST IRON.

Subsector : M03 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA166996/0001 Project EstablishedICS :National Ref : PR NF E82-004Title : Die forging - Repair conditions before delivery



Subsector M04: COPPER.

Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022140/0001 Project EstablishedICS : 77.150.30National Ref : E12022140Title : Copper and copper alloys - Tubes for heat exchangers and desalting plants -

Determination of speciated carbon residues on the internal surface - Combustion method

Scope : This Italian Standard specifies the general criteria and specific performing way in order to determine the carbon content, if any on the inner surface of copper alloy tubes intended for heat exchanger and desalting plants use. This Standard provides also the speciation of

Scope : the total carbon.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022150/0001 Project EstablishedICS : 77.120.30, 77.150.30National Ref : E12022150Title : Copper and copper alloys - Pre-insulated copper tubes, tubes with solid covering for gas

transport under soil - Properties and test on plastic coveringScope : This Italian Standard specifies properties and inspection of plastic solid covering applied to

copper tubes, by extrusion process.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022160/0001 Project EstablishedICS : 77.120.30National Ref : E12022160Title : Copper and copper alloys - Ingots and castings - Special aluminium bronze

(CuAl9Fe3Zn3Ni2) for remelting of mechanical articles with tight tolerancesScope : This Italian Standard specifies the requirements of special aluminium bronze and casting for

remelting of mechanical articles with tight tolerances high mechanical resistance and good machinability. Provisions are given for classification, special copper aluminium alloy designation, production conditions, characteristics and identification marking.


Subsector : M04 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 12022170/0001 Project EstablishedICS : 77.120.30National Ref : E12022170Title : Copper and copper alloys - Ingots and castings - Zinc-bronze (CuSn6Zn6)Scope : This italian standard specifies the requirements of zinc bronze ingot and casting for

remelting to be used in the production of artistical articles. Classification and designation of this zinc bronze, together with production conditions, characteristics and marking identification are also provided.


Subsector : M04 Registration Date : 2010-02-12Organization : UNI

Country : ItalyProject ID : 12022181/0001 Project EstablishedICS : 77.150.30National Ref : E12022181Title : Bronze scraps - Part 1: Impure binary Cu Sn alloy - Types, characteristics and chemical

compositionScope : This Italian Standard specifies the types, characteristics, extra loss and designation for

impure binary tin bronze. The yield and the chemical composition are also given.

Relatedness :National : REV/AMD UNI 10596-1:1997

Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022182/0001 Project EstablishedICS : 77.150.30National Ref : E12022182Title : Bronze scraps - Part 2: Cu Sn alloy for general purposes - Types, characteristics and

chemical compositionScope : This Italian Standard specifies the types, characteristics, extra loss and designation of

industrial tin bronze scraps. The yield and chemical composition of metal are also given.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022183/0001 Project EstablishedICS : 77.150.30National Ref : E12022183Title : Bronze scraps - Part 3: Leaded Cu Sn alloy - Types, characteristics and chemical

compositionScope : This Italian Standard specifies the types, characteristics, extra loss and industrial leaded tin

bronze scraps. The yield and chemical composition of metal are also given.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022184/0001 Project EstablishedICS : 77.150.30National Ref : E12022184Title : Bronze scraps - Part 4: Engineering Cu Sn alloy - Types, characteristics and chemical

compositionScope : This Italian Standard specifies the types, characteristics, extra loss engineering tin bronze

scraps. The yield and chemical composition of metal are also given.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022185/0001 Project EstablishedICS : 77.150.30National Ref : E12022185Title : Bronze scraps - Part 5: Cu Sn alloy for valves - Types, characteristics and chemical

compositionScope : This Italian Standard specifies the types, characteristics, extra loss and designation for tin

bronze valve scraps. The yield and chemical composition of metal are also given.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022191/0001 Project EstablishedICS : 77.150.30National Ref : E12022191Title : Bronze scraps - Part 1: Aluminium bronze 1st category - Types, characteristics and

chemical compositionScope : This Italian Standard specifies types, characteristics, extra loss of first category aluminium

bronze scrap. Designation, yield and chemical composition are also provided.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022192/0001 Project EstablishedICS : 77.150.30National Ref : E12022192Title : Bronze scraps - Part 2: Aluminium bronze 2nd category - Types, characteristics and

chemical compositionScope : This Italian Standard specifies types, characteristics, extra loss of second category

aluminium bronze scrap. Designation, yield and chemical composition are also provided.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022201/0001 Project EstablishedICS : 77.120.30National Ref : E12022201Title : Copper and copper alloys - Metallography - Part 1: Macroscopic examinationScope : This Italian Standard specifies the preparation methods and surface etching on semifinished

and casting sections of copper and copper alloys products, considering the possibility to perform these operations on the total or part of the test sample surface intended for macro examination.


Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022202/0001 Project EstablishedICS : 77.120.30National Ref : E12022202Title : Copper and copper alloys - Metallography - Microscopic examinationScope : This Italian Standard specifies the preparation methods and surface etching of test samples

from copper and copper alloys products intended for micro examination.


Subsector : M04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 12022230/0001 Project EstablishedICS : 77.120.30National Ref : E12022230Title : Copper and copper alloys - Plumbing fittings - Fitting with press ends for use with

composite copper tubesScope : This Italian Standard specifies materials and test requirements for copper and copper alloys

to be used for connecting composite copper tubes intended for cold/hot water in general and heating/cooling systems. Fuel gas transport is also included.



Subsector M08: LIGHT ALLOYS.

Subsector : M08 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01000265/0001 Project EstablishedICS :National Ref : BS 3L 500Title : Procedure for inspection, testing and acceptance of wrought magnesium-base alloys




Organization : BSICountry : United KingdomProject ID : 01000266/0001 Project EstablishedICS :National Ref : BS 5L 100Title : Procedure for inspection, testing and acceptance of wrought aluminium and aluminium

alloys




Organization : BSICountry : United KingdomProject ID : 01000267/0001 Project EstablishedICS :National Ref : BS 5L 101Title : Procedure for inspection, testing and acceptance of aluminium-base and magnesium-

base ingots and castings


Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043690/0001 Project EstablishedICS : 77.120.10, 77.150.10National Ref : E12043690Title : Aluminium and aluminium alloys - Extruded tubes with internal epoxy resin and external

polypropylene coating - Requirements and testsScope : This Italian Standard specifies constructive and dimensional requirements of bridge-dye,

extruded tubes containing an inner epoxy resin coating with a polypropylene external coating intended to be used in the field of fluid transport.


Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043700/0001 Project EstablishedICS : 77.150.10, 91.060.50National Ref : E12043700Title : Aluminium and aluminium alloys - Windows and doors of aluminium and aluminium

alloys for building purposes - Specifications for the choice, use and tests of materialsScope : This Italian Standard specifies the choice criteria, use and test of materials and semifinished

products with relative finishing intended to be used in the manufacturing of aluminium alloys windows and doors.

Relatedness :


Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043710/0001 Project EstablishedICS : 77.150.10National Ref : E12043710Title : Aluminium alloys - Pressure die casting - General requirements for deliveryScope : This Italian Standard specifies the ordering information data, the general technical

conditions for inspection and delivery of aluminium alloys pressure die casting. It is not applicable to normal gravity casting processes.


Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043720/0001 Project EstablishedICS : 77.150.10National Ref : E12043720Title : Pressure die castings of aluminium alloy - General tolerancesScope : This Italian Standard specifies dimensional tolerances and form of pressure die castings, of

appendice casting and allowance. It applies to design dimensions without any specific tolerance references.


Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043730/0001 Project EstablishedICS : 77.120.10National Ref : E12043730Title : Aluminium and aluminium alloys - Aluminium alloy castings for components requiring

leak tightnessScope : This Italian Standard specifies the conditions for the request and choice of leak tightness

test to be performed upon any aluminium alloy casting produced in the foundry. It provides: the identification of the test to be performed: differential pressure method, immersion air-water method (bubble), helium method test; the indications to be given during the ordering stage relative to the leak tightness request, the information's to be given into the final report; technical aspects qualifying better the test are also precised (leak tightness generals, measuring units used, leak level allowable).



Subsector M14: NICKEL.



Organization : BSICountry : United KingdomProject ID : 01000027/0001 Project EstablishedICS :National Ref : BS 2HR 209Title : Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting

alloy plate, sheet and strip. (Ni base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)




Organization : BSICountry : United KingdomProject ID : 01000029/0001 Project EstablishedICS :National Ref : BS 3HR 401Title : Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless

tubes. (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)




Organization : BSICountry : United KingdomProject ID : 01000030/0001 Project EstablishedICS :National Ref : BS 2HR 402Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy

seamless tubes. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)




Organization : BSICountry : United KingdomProject ID : 01000031/0001 Project EstablishedICS :National Ref : BS 2HR 403Title : Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes. (Nickel

base, Cr 19.5, Ti 0.4)




Organization : BSICountry : United KingdomProject ID : 01000032/0001 Project EstablishedICS :National Ref : BS 2HR 404Title : Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting

alloy seamless tubes. (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)




Organization : BSICountry : United KingdomProject ID : 01000181/0001 Project EstablishedICS :National Ref : BS 3HR 501Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold

drawn wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)




Organization : BSICountry : United KingdomProject ID : 01000182/0001 Project EstablishedICS :National Ref : BS 3HR 502Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold

drawn and solution treated wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)




Organization : BSICountry : United KingdomProject ID : 01000183/0001 Project EstablishedICS :National Ref : BS 3HR 503Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for

thread inserts. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)(0.45 mm to 2 mm diameter)




Organization : BSICountry : United KingdomProject ID : 01000184/0001 Project EstablishedICS :National Ref : BS 3HR 504Title : Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets.

(Maximum diameter or minor sectional dimension 20 mm)(Nickel base, Cr 19.5, Ti 0.4)



Subsector M20: TIN AND TIN ALLOYS.

Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030721/0001 Project EstablishedICS : 77.120.60National Ref : E12030721Title : Tin scraps - Types, characteristics and chemical composition - Part 1: Unalloyed tinScope : This Italian Standard specifies, types, characteristics, extra loss and designation of not

alloyed tin scrap. The yield and chemical composition are also provided.


Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030722/0001 Project EstablishedICS : 77.120.60National Ref : E12030722Title : Tin scraps - Types, characteristics and chemical composition - Part 2: Soldering tin

alloysScope : This Italian Standard specifies, types, characteristics, extra loss and designation of tin scrap

from soldering alloys. The yield and chemical composition are also provided.


Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030723/0001 Project EstablishedICS : 77.120.60National Ref : E12030723Title : Tin scraps - Types, characteristics and chemical composition - Part 3: PewterScope : This Italian Standard specifies, types, characteristics, extra loss and designations from

pewter scrap. The yield and chemical composition are also provided.


Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030724/0001 Project EstablishedICS : 77.120.60National Ref : E12030724Title : Tin scraps - Types, characteristics and chemical composition - Part 4: White metal

bearing tin alloysScope : This Italian Standard specifies, types, characteristics, extra loss and designation from white

metal bearing tin alloy scrap. The yield and chemical composition are also provided.


Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030725/0001 Project EstablishedICS : 77.120.60National Ref : E12030725Title : Tin scraps - Types, characteristics and chemical composition - Part 5: Mixed tin alloysScope : This Italian Standard specifies, types, characteristics, extra loss and designation from tin

alloys scrap mixture. The yield and chemical composition are also provided.


Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030726/0001 Project EstablishedICS : 77.120.60National Ref : E12030726Title : Tin scraps - Types, characteristics and chemical composition - Part 6: Tin drippings,

skimmings, oxides and ashesScope : This Italian Standard specifies, types, characteristics, extra loss and designation from tin

drippings, skimmings oxides and ashes. The yield and chemical composition are also provided.



Subsector M22: LEAD AND LEAD ALLOYS.

Subsector : M22 Registration Date : 2010-02-12Organization : UNICountry : Italy

Project ID : 12030730/0001 Project EstablishedICS : 77.120.60National Ref : E12030730Title : Lead alloys for batteries - Pb-Sb, Pb-Ca and Pb-Sn alloys - Types and requirementsScope : This Italian Standard specifies the chemical composition and designation of lead alloy ingots

for batteries. Furthermore some requirements for mass aspect and marking are also established.



Subsector M99: UNDETERMINED.



Organization : BSICountry : United KingdomProject ID : 01000028/0001 Project EstablishedICS :National Ref : BS 2HR 240Title : Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate,

sheet and strip. (Cobalt base Cr 20, W 15, Ni 10, Mn 1.5)


Subsector : M99 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12000060/0002 Project EstablishedICS : 55.100National Ref : E12000060Title : Glass containers - Pilfer proof mouths with pourerScope : This Italian Standard specifies form, dimension and tolerances of holes and external profile

of pilfer proof mouths with pourer, intended to be used on glass containers.


Subsector : M99 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030710/0001 Project EstablishedICS : 77.150.60National Ref : E12030710Title : Tin-lead alloys for soft solderings and coatings - Types and requirementsScope : This Italian Standard specifies the chemical composition and designation of tin-lead alloys

in ingots, bars or wires intended to be used for soft soldering and surface coating processes. Requirements for mass, aspect and product marking are also provided.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD.

Subsector : N01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 07400174/0001 Project EstablishedICS :National Ref : 07400174Title : Paper and board - Vocabulary - Amendment A1



Subsector N02: SOLID FUELS.

Subsector : N02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O110/0001 Project EstablishedICS : 75.160.10National Ref : E0910O110Title : Hard coal - Expansion determination of coal - Koppers methodScope : This standard specifies a method for the determinazion of the "pushing power" of a coal,

defined as the pressure exercised by the coal when, under heating, it cannot expand freely.



Subsector N03: PETROLEUM PRODUCTS.

Subsector : N03 Registration Date : 2010-02-01Organization : SIST Draft Issue Date : 2010-03-01Country : Slovenia Latest Date for Comments : 2010-05-01Project ID : 00019392/0001 Draft for public enquiryICS : 75.160, 75.160.20National Ref : SIST EN 14214:2009+A1:2010/oA101:2010Title : Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements

and test methods


Subsector : N03 Registration Date : 2010-02-01Organization : SIST Draft Issue Date : 2010-03-01Country : Slovenia Latest Date for Comments : 2010-05-01Project ID : 00019393/0001 Draft for public enquiryICS : 75.160, 75.160.20National Ref : SIST EN 590:2009+A1:2010Title : Automotive fuels - Diesel - Requirements and test methods

Relatedness :

National : New

Subsector : N03 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233421/0001 Project EstablishedICS :National Ref : 06233421Title : Testing of petroleum products - Method for sample preparation - Part 2: ...


Subsector : N03 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233432/0001 Project EstablishedICS :National Ref : 06233432Title : Testing of mineral oils and related materials - Determination of density


Subsector : N03 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O100/0001 Project EstablishedICS : 75.160.30National Ref : E0910O100Title : Petroleum products - LPG for aerosol - Determination of 1,3 butadiene -

Gascromatographic methodScope : This standard specifies a gas-chromatographic method for the determination of 1,3

butadiene in liquified petroleum gas for aerosol mixtures and for other uses. The standard is applicable for 1,3 butadiene contents higher than 0,010 % m/m.



Subsector N04: REFRACTORIES.

Subsector : N04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 1325C591/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C591Title : Plastics packaging from post-consumer selected as homogeneous fractions -

Assessment of conformity of the batch to the specification of homogeneity - Part 1: Polyethylenterephtalate (PET) liquid container

Scope : The standard defines a method of sampling and of the assessment of conformity to a given

Scope : homogeneity specification of a batch of containers for liquids from post-consumer of polyethylenterephtalate to be used to the production of recycled plastic materials from the selection on containers.


Subsector : N04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 1325C592/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C592Title : Plastics packaging from post-consumer selected as homogeneous fractions -

Assessment of conformity of the batch to the specification of homogeneity - Part 2: Polyethylene (PE) liquid container

Scope : The standard defines a method of sampling and of the assessment of conformity to a given homogeneity specification of a batch of containers for liquids from post-consumer of polyethylene to be used to the production of recycled plastic materials from the selection of containers.



Subsector N05: TEXTILES.

Subsector : N05 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 15210390/0001 Project EstablishedICS : 59.080.01National Ref : E15210390Title : Textiles - Test methods - Determination of metal contentScope : The objective of this standard is to determine the content of heavy metals in textile

products and it should consist of two parts concerning the determination of extractable metals and the determination of total metal content, respectively.

Relatedness :National : REV/AMD UNI 9148:1987, UNI 9147:1987 and UNI 9146:1987


Subsector N06: RUBBER.

Subsector : N06 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 35007040/0001 Project EstablishedICS : 83.060National Ref : U35007040Title : Elastomers - Tests on vulcanized rubbers - Determination of mass, volume and

dimensions variation of rubber products in static contact with water mixable and not liquids

Scope : This standard specifies test methods for the determination of mass, volume and dimensions variation of rubber products in static contact with water mixable and not liquids.


Subsector : N06 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA165825/0001 Project EstablishedICS :National Ref : PR XPT47-758Title : End of Life Tyres (ELF) - Determination of the textile content of granulates from grinding

process of End of Life Tyres - Method based on the manual separation after mechanical sieving of product


Subsector : N06 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167122/0001 Project EstablishedICS :National Ref : PR NF G37-126Title : Rubber or plastic coated fabrics-Exposure to liquids by contact with one face


Subsector : N06 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167533/0001 Project EstablishedICS :National Ref : PR XP T47-760Title : End of life tyres (ELT) . Characterisation of products from primary shredding . Guidance

for a testing campaign



Subsector N09: PLASTICS.

Subsector : N09 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 1308C820/0001 Project EstablishedICS : 23.040.01National Ref : E1308C820Title : Plastics piping systems - Fire protections valves

Scope : The standard is related to the thermoplastic valves that are used in the fixed fire extinguishing systems. The standard specifies the minimum requirements that the valves shall satisfy and the installation modes. The valves are used to the followings conditions: maximum operational pressure PFA 16 bar, reference working temperatures 20 °C. The valves are of the following type: quarter of turn, sphere or butterfly.



Subsector N14: PLASTICS PIPES.

Subsector : N14 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-10Project ID : P0030594/0002 Draft for public enquiryICS :National Ref : PNE 53994Title : Plastics. Pipes and fittings made from unplastized poli(vinyl chlorhide) (PVC-U) and

polyethylene (PE) for building and civil engineering subsoil drainage.Scope : It applies to thermoplastics piping systems for civil engineering in order to collect and

transport surface and seepage water by gravity.

Relatedness :National : REV/AMD UNE 53994:2000 EX


Subsector N99: UNDETERMINED.

Subsector : N99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N960/0001 Project EstablishedICS : 75.100National Ref : E0910N960Title : Cutting oils - Determination of pH in cutting oils miscible with waterScope : The determination of pH in cutting oils miscible with water is described.


Subsector : N99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N970/0001 Project EstablishedICS : 75.100National Ref : E0910N970Title : Cutting oils - Determination of boron in cutting oils miscible with water or soluble in

water by inductively coupled plasma atomic emission spectrometryScope : The determination of boron as water soluble compound in cutting oils soluble or

emulsifiable with water is described by inductively coupled plasma atomic emission spectrometry.


Subsector : N99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N980/0001 Project EstablishedICS : 75.100National Ref : E0910N980Title : Cutting oils - Determination of chlorine in cutting oils miscible or soluble in water by X

ray fluorescence spectrometryScope : The determination of chlorine in cutting oils soluble or emulsifiable with water by X ray

fluorescence spectrometry is described.


Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910N990/0001 Project EstablishedICS : 75.100National Ref : E0910N990Title : Cutting oils - Determination of phosphorus in cutting oils miscible or soluble in water by

inductively coupled plasma atomic emission spectrometryScope : The determination of phosphorus in cutting oils soluble or emulsifiable with water by

inductively coupled plasma atomic emission spectrometry is described.


Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O000/0001 Project EstablishedICS : 75.100National Ref : E0910O000Title : Cutting oils - Assessment of dynamic stability of cutting oils miscible with waterScope : The determination of tendency to form sludges in cutting oils miscible with water is

described.


Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O010/0001 Project EstablishedICS : 75.100National Ref : E0910O010Title : Cutting oils - Assessment of compatibility of cutting oils with rubber components

Scope : Assessment of compatibility of cutting oils with different kinds of elastomers generally used in worker machines is described. The test allows to evaluate the mass and volume variations when elastomer plates are subjected to rapid ageing in contact with the test fluid.


Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O020/0001 Project EstablishedICS : 75.100National Ref : E0910O020Title : Cutting oils - Determination of sulphurScope : The determination of sulphur in cutting oils by inductively coupled plasma atomic emission

spectrometry is described.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION.

Subsector : S01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 00100827/0001 Project EstablishedICS :National Ref : 00100827Title : Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation

method


Subsector : S01 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 20001930/0001 Project EstablishedICS : 13.140National Ref : U20001930Title : Acoustics - Determination of occupational noise exposureScope : This standard provides a method to determine the occupational noise exposure in relation

to the noise-induced hearing impairment and the instruments to use with reference to Italian laws.



Subsector S08: AIR QUALITY.

Subsector : S08 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-20Project ID : P0023258/0002 Draft for public enquiryICS :National Ref : PNE 171330-3Title : Indoor air quality. Part 3: Indoor air management systems.Scope : This standard specifies the indoor air management systems in order to certificate and audit

the indoor air quality inside a building.



Subsector S09: WATER QUALITY AND WATER SUPPLY.

Subsector : S09 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000036/0001 Project EstablishedICS :National Ref : BS XXXX

Title : Water sampling for buildings. Heating and chilled water systems


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N530/0001 Project EstablishedICS : 13.060.50National Ref : E0910N530Title : Water quality - Determination of Chlorine dioxide - Colorimetric method with p-chloro

phenolScope : The standard specifies a UV-VIS spectrometric method for the determination of chlorine

dioxide in water.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N550/0001 Project EstablishedICS : 13.060.20National Ref : E0910N550Title : Water intended for human consumption - Measurement of temperatureScope : The standard specifies a method for the measurement of temperature of water intended

for human consumption. The method is also usable for row waters intended for drinking water production.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N560/0001 Project EstablishedICS : 13.060.20National Ref : E0910N560Title : Water intended for human consumption - Determination of silica - Molybdenum blue

colorimetric methodScope : The standard specifies a method for the determination of silica content in water intended

for human consumption and in raw waters intended for dirinking water production.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N570/0001 Project EstablishedICS : 13.060.20

National Ref : E0910N570Title : Water intended for human consumption - Determination of fixed residuum at 180 °C -

Gravimetric methodScope : The standard specifies a method for dry residue determination of water intended for

human consumption and also of surface and ground waters used for drinking water production.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N580/0001 Project EstablishedICS : 13.060.20National Ref : E0910N580Title : Water intended for human consumption - Determination of free carbon dioxide -

Acidimetric methodScope : The standard specifies a method for free carbon dioxide determination in drinking water or

in surface and ground waters intended for drinking water production. The method determines at the same time either the carbon dioxide balanced with HCO3- and CO3-- ions or the aggressive one. The method does not allow the direct determination the aggressive properties of water due to the carbon dioxide presence.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N591/0001 Project EstablishedICS : 13.060.50National Ref : E0910N591Title : Water quality - Determination of non ionic surfactants - Tetrakis Active Substances

method (TAS)Scope : The standard specifies a method for the determination of nonionic ethoxylated surfactants

dissolved in waters. The method can be used either for testing the possible contamination of surface waters or for monitoring the nonionics concentration of inlet and outlet water in a treatment plant.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N592/0001 Project EstablishedICS : 13.060.50National Ref : E0910N592Title : Water quality - Determination of non ionic surfactants - Potassium Picrate Spectrometric

method (PPAS)Scope : The standard specifies a method for the determination of nonionic ethoxylated surfactants

dissolved in drinking water, surface water, ground water, waste water or in water intended

Scope : for drinking water production.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N600/0001 Project EstablishedICS : 13.060.50National Ref : E0910N600Title : Water quality - Determination of chlorite - Voltammetric methodScope : The standard specifies a method for the ion chlorite electrochemical determination in

surface water and in water intended for human consumption and also in waste water.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N610/0001 Project EstablishedICS : 13.060.50National Ref : E0910N610Title : Water quality - Determination of volatile hydrocarbons (VOC) and volatile halogenated

hydrocarbons (VOX) - Method by solid-phase microextraction (SPME) and capillary gas-chromatography

Scope : The standard specifies a method for the VOC and VOX determination in drinking, surface, ground and low contaminated waste waters by solid phase microextraction (SPME) and capillary gas chromatography.


Subsector : S09 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910N620/0001 Project EstablishedICS : 13.060.50National Ref : E0910N620Title : Water quality - Determination of nitrogenous (triazine) herbicides - Method by solid-

phase microextraction (SPME) and capillary gas-chromatographyScope : The standard specifies a method for the determination of triazinic herbicides by solid phase

microextraction (SPME) and capillary gas chromatography in drinking, surface and ground low contaminated waters.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : Italy

Project ID : 0910N630/0001 Project EstablishedICS : 13.060.50National Ref : E0910N630Title : Water quality - Determination of iron, manganese, nickel, copper, zinc, lead, cadmium

and cobalt - ICP-AES method, after preconcentration on chelating resinScope : The standard specifies a method for the determination of free iron, manganese, nickel,

copper, zinc, lead, cadmium and cobalt in low contaminated surface and ground waters.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N640/0001 Project EstablishedICS : 13.060.20National Ref : E0910N640Title : Water intended for human consumption - Determination of antimony - Atomic absorption

spectrometric method by hydride generationScope : The standard specifies a method for the determination of total antimony in drinking water,

surface water, ground water and in water intended for drinking water production.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N650/0001 Project EstablishedICS : 13.060.20National Ref : E0910N650Title : Water intended for human consumption - Detection of bacteria referable to the genus

ShigellaScope : This standard defines a method for the detection of bacteria referable to the genus Shigella

in water intended for human consumption.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N680/0001 Project EstablishedICS : 13.060.20National Ref : E0910N680Title : Water intended for human consumption - Detection of pathogenous staphylococciScope : This standard defines a method for the detection of pathogenous staphylococci in water

intended for human consumption. In waters intended for human consumption pathogenous staphylococci must be always absent. The detection of pathogenous staphylococci is important to define the potential pathogenicity and to represent an index of animal contamination.

Relatedness :


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N690/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910N690Title : Water intended for human consumption - Determination of algal accessory pigments -

Chromatographic method HPLCScope : This standard defines a HPLC method for the determination of the content of algal

accessory pigments in water intended for human consumption.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N700/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910N700Title : Water intended for human consumption - General guidance for microbiological

examinationsScope : This standard defines general indications to observe in microbiological tests in water

intended for human consumption.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N920/0001 Project EstablishedICS : 13.060.50National Ref : E0910N920Title : Water quality - Determination of highly volatile halogenated and aromatic hydrocarbons

- Gas chromatographic analysis after purge und trap recovery techniqueScope : The standard specifies a method for the determination of highly volatile chlorinated and

aromatic hydrocarbons in ground, surface, swimming pool, and intended for human consumpion waters.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N940/0001 Project EstablishedICS : 13.060.20National Ref : E0910N940Title : Water intended for human consumption - Determination of barium - Atomic absorption

Title : spectrometric method with graphite furnaceScope : The standard specifies a method for the determination of barium in water intended for

human consumption using atomic absorption spectrometry with electrothermal atomization in a graphite furnace.


Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N950/0001 Project EstablishedICS : 13.060.20National Ref : E0910N950Title : Water intended for human consumption - Determination of beryllium - Atomic absorption

spectrometric method with graphite furnaceScope : The standard specifies a method for the determination of beryllium in water intended for

human consumption using atomic absorption spectrometry with electrothermal atomization in a graphite furnace.


Subsector : S09 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O590/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910O590Title : Water intended for human consumption - Detection of chlorophyll aScope : This standard specifies a method for the detection of chlorophyll a in water intended for

human consumption. Moreover, the standard permits to obtain a valuation of the feopigments using the artificial degradation of the chlorophyll contained in the examined sample adding hydrochloric acid.


Subsector : S09 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O600/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910O600Title : Water intended for human consumption - Detection of helminthesScope : This standard defines a method for the detection of helminthes in water intended for

human consumption. Water samples are analysed by a microporous membrane filtration technique or by a sedimentation with Imhoff funnels. After microscopic observation, the identification of helminthes is based on morphological aspects.



Subsector S16: AIDS FOR THE DISABLED.

Subsector : S16 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 05300324/0001 Project EstablishedICS :National Ref : 05300324Title : Ramps installed on vehicles for wheelchair users and for people restricted in their

mobility - Safety requirements and testing



Subsector S26: ENVIRONMENTAL MANAGEMENT

Subsector : S26 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000259/0001 Project EstablishedICS :National Ref : BS 8905Title : Guidance on the sustainable use of materials



Subsector S99: UNDETERMINED.

Subsector : S99 Registration Date : 2010-02-22Organization : SUTNCountry : SlovakiaProject ID : 75001110/0001 Project EstablishedICS :National Ref : STN 75 0190Title : Water resources. Climatology. Terminology


Subsector : S99 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-20Project ID : P0031613/0002 Draft for public enquiryICS :National Ref : PNE 179003Title : Health services. Risk management for patient safety.

Scope : This standard establishes a methodology for risk management of patient safety.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES.

Subsector : T01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 13202230/0001 Project EstablishedICS :National Ref : 13202230Title : Ships and marine technology - Round or spiral plated man-made fibre ropes


Subsector : T01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 13202231/0001 Project EstablishedICS :National Ref : 13202231Title : Fibre ropes - Splices - Definitions, safety requirements, test method



Subsector T02: AEROSPACE.

Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000027/0001 Project EstablishedICS :National Ref : BS 2HR 209Title : Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting

alloy plate, sheet and strip. (Ni base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000028/0001 Project EstablishedICS :National Ref : BS 2HR 240Title : Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate,

sheet and strip. (Cobalt base Cr 20, W 15, Ni 10, Mn 1.5)


Subsector : T02 Registration Date : 2010-02-01

Organization : BSICountry : United KingdomProject ID : 01000029/0001 Project EstablishedICS :National Ref : BS 3HR 401Title : Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless

tubes. (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000030/0001 Project EstablishedICS :National Ref : BS 2HR 402Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy

seamless tubes. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000031/0001 Project EstablishedICS :National Ref : BS 2HR 403Title : Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes. (Nickel

base, Cr 19.5, Ti 0.4)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000032/0001 Project EstablishedICS :National Ref : BS 2HR 404Title : Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting

alloy seamless tubes. (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000181/0001 Project EstablishedICS :

National Ref : BS 3HR 501Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold

drawn wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000182/0001 Project EstablishedICS :National Ref : BS 3HR 502Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold

drawn and solution treated wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000183/0001 Project EstablishedICS :National Ref : BS 3HR 503Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for

thread inserts. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)(0.45 mm to 2 mm diameter)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000184/0001 Project EstablishedICS :National Ref : BS 3HR 504Title : Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets.

(Maximum diameter or minor sectional dimension 20 mm)(Nickel base, Cr 19.5, Ti 0.4)


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000265/0001 Project EstablishedICS :National Ref : BS 3L 500Title : Procedure for inspection, testing and acceptance of wrought magnesium-base alloys


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000266/0001 Project EstablishedICS :National Ref : BS 5L 100Title : Procedure for inspection, testing and acceptance of wrought aluminium and aluminium

alloys


Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000267/0001 Project EstablishedICS :National Ref : BS 5L 101Title : Procedure for inspection, testing and acceptance of aluminium-base and magnesium-

base ingots and castings



Subsector T03: ROAD VEHICLES.

Subsector : T03 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00023015/0001 Project EstablishedICS :National Ref : ONR 225007Title : Electrically propelled road vehicles - Survey of standards and specificationScope : This ON-rule facilitates the correct selection of standards and specifications for electrically

propelled road vehicles (electric vehicles).


Subsector : T03 Registration Date : 2010-02-12Organization : UNI Draft Issue Date : 2009-11-10Country : Italy Latest Date for Comments : 2009-12-22Project ID : 0322A420/0001 Project EstablishedICS : 43.040.50, 83.160.10National Ref : E0322A420Title : Road vehicles - Supplementary grip devices for tyres of motor vehicles of category M1,

N1, O1, O2 - Safety requirements and test methods

Scope : This standard specifies safety and performance requirements for supplementary grip devices, commonly called “snow chains”, intended to be fitted on tyres of passenger cars and light duty vehicles.


Subsector : T03 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 05202436/0001 Project EstablishedICS :National Ref : 05202436Title : Clutch facings; dimensions and tolerances



Subsector T14: PACKAGING.

Subsector : T14 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022974/0001 Project EstablishedICS :National Ref : ÖNORM A 5432Title : Determination of maximum heights for unit loadsScope : This Austrian Standard is applicable for the determination of maximum heights for unit

loads.


Subsector : T14 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022975/0001 Project EstablishedICS :National Ref : ÖNORM A 5470-1Title : Packaging - General technical terms of delivery and supply - Part 1: BasicsScope : This Austrian Standard is applicable for the provision of samples, zeros series and serial

production of packaging materials, packaging means, packaging aids, packages and packagings.


Subsector : T14 Registration Date : 2010-02-15Organization : ASICountry : Austria

Project ID : 00022976/0001 Project EstablishedICS :National Ref : ÖNORM A 5471Title : Packaging - Special technical terms of delivery and supply - LayoutScope : This Austrian Standard is applicable for the layout of special technical terms of delivery and

supply (STLB) in the area of packaging.



Subsector T20: TRAM- AND RAILWAY ENGINEERING.

Subsector : T20 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 08700649/0001 Project EstablishedICS :National Ref : 08700649Title : Design guide for railway vehicles and their components - Bolted joints - Part 2: Design -

Mechanical application



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED.

Subsector : Z99 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 14J1G440/0001 Project EstablishedICS : 35.020National Ref : E14J1G440Title : Technical Specifications for secure and reliable electronic information preservation

systemsScope : In the light of EU-wide implementation of Directive 2006/123/EC, art. 26 EUMS are required

to “take accompanying measures to encourage providers to take action on a voluntary basis in order to ensure the quality of service provision”. This will be accomplished through certification, assessment or by means of quality charters. Among the service providers addressed by this Directive are doubtlessly also Information Preservation Service Providers. Additionally, Directive 95/46 art. 17(2) states: “The Member States shall provide that the controller must, where processing is carried out on his behalf, choose a processor providing sufficient guarantees in respect of the technical security measures and organizational measures governing the processing to be carried out, and must ensure compliance with those measures.” The purpose is to deliver a consistent set of Information Preservation related requirements in order to assure an even assessment level throughout the EU based on EU-wide applicable criteria.


Subsector : Z99 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 14J1G450/0001 Project EstablishedICS : 03.080.99, 35.020National Ref : E14J1G450Title : Interpretation guidelines for ISO/IEC 20000-1Scope : Any standard, whilst attentively written, always is affected by interpretation ambiguity;

specially in the early phases of presentation and first application. This situation characterizes also ISO/IEC 20000 family standard. A possible interpretation ambiguity can lead to undesired or dangerous situations, like: a not unified use of the same standard; a lack in confidence and related qualitative value of the same standard for interested parties; this leading to a real risk of a misuse for certifications not supported by real value in business; difficulties applying the standard, due to interpretation efforts. The "interpretation guidelines for ISO/IEC 20000-1" are not intended to modify at all the original contents they refer to, but only explain the meaning of some specific wording or topics, where the authors found themselves real difficulty in finding a common sense in interpretation or thinking to the possible application.



** End of Sector **

monthly notifications register - sutn€¦ · h11 heater controls 161 58 h12 ceramic and glass-ware...

Documents