morati catalog 2-01

MORATI Titanium Bicycle Components

MORATI Titanium Bicycle Components

MORATI Titanium Bicycle Components was founded in 1995. MORATI belongs to the Mora Aerospace company whichhas been working in aviation industry as a specialist for hot bulb and stationary parts of turbine engines for 49 years.Its technical and technological potential allows an open partnership with prominent world engine producers, such as e.g.American Honeywell. Mora Aerospace's and MORATI's knowledge in the sphere of metallurgy, shaping, weldingor machining of refractory anticorrosive materials and high consistent titanium alloys, together with the system of qualityin harmony with air standards, has made MORATI famous and resulted in its penetration into the world of cycling.

Active Absorption of Vibrations Rearstays titanium design

Extra stiff MTB and Cyclocross seat stays

Excellent lightweight handle bars systemwith special vibrations absorption design

New system of bottom bracket design for MTBand Road frames with excellent lateral stiffness.New idea for effective softtail frames function.

MORATI new creative development, new technical terminology

Custom configurations also available. The bottom bracket is 68 mm wide, with BSAthread and 1" head assembly. Compatible with seatposts dia 27..2 mm, Al seatpostclamp. The frame design allows using MORATI titanium fork. Top pull front derailleurcompatible, clamp dia 31.8 mm, version with FD boss also available. Disc brakemodification available. MORATI bicycle frames are compatible with worldwidestandard component sizes. Natural titanium colour.Material: The frames are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

MORATI bicycle frames have a sophisticated design that uses an oversize crossbar toassure high rigidity of the triangle base. The design of the rear part of the frame isunique by its stiffness and support for the rear brake pivots. It easily meets andexceeds the strict parameters required for the use of hydraulic brakes.

framesFRAMESMORATI CR 1.1 Ti Pro Race

Cyclocross Frame

Seat stays

MORATI stays

Bottom bracket shell

Geometry 520 540 560 580

Seat tube angle (degrees) 74° 74° 74° 74°Head tube angle (degrees) 72° 72° 72.5° 73.5°Size center to center (mm) 520 540 560 580Top tube lenght (mm) 530 540 560 570Seat tube lenght (mm) 570 590 610 630Chain stay lenght (mm) 425 425 425 425Wheel base (mm) 1002 1013 1029 1030Head tube length (mm) 105 137 155 180Weight (g) 1530 - 1650 according to modification

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

ABCDEFGHI

Hard Tail MTB frame

S-bendchainstays

framesFRAMESMORATI HC 1.1 Ti Pro Race

Geometry 15" 16" 17" 18" 19" 20"

Seat tube angle (degrees) 73° 73° 73° 73° 73° 73°Head tube angle (degrees) 71° 71° 71° 71° 71° 71°Size center to center (mm) 381 406 430 457 483 508Top tube lenght (mm) 543 550 560 568 575 585Seat tube lenght (mm) 431 456 480 507 533 558Chain stay lenght (mm) 425 425 425 426 425 425Wheel base (mm) 1043 1048 1056 1061 1065 1076Head tube length (mm) 100 100 100 106 116 142Weight (g) 1440 - 1590 according to modification

MORATI bicycle frames have a sophisticated design that uses an oversize crossbar toassure high rigidity of the triangle base. The design of the rear part of the frame isunique by its stiffness and support for the rear brake pivots. It easily meets andexceeds the strict parameters required for the use of hydraulic brakes.

Custom configurations also available. The bottom bracket is 68 mm wide, with BSAthread and 1 1/8" head assembly. Compatible with seatposts dia 27.2 mm. Theframe design allows using MORATI titanium fork. Disc brake modifications available.Convectional top pull front derailleur compatible, clamp dia 31.8 mm.MORATI bicycle frames are compatible with worldwide standard component sizes.Natural titanium colour.Material: The frames are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

ABCDEFG

MORATI stays

MORATI seatpost clamp

HI

Geometry 16" 17" 18" 19" 20"

Seat tube angle (degrees) 73° 73° 73° 73° 73°Head tube angle (degrees) 71° 71° 71° 71° 71°Size center to center (mm) 406 406 430 430 457Top tube length (s-s) 550 560 568 575 576Seat tube lenght (mm) 537 537 537 537 537Chain stay lenght (mm) 425 425 425 425 425Wheel base (mm) 1048 1058 1065 1073 1075Head tube length (mm) 100 100 106 116 142Weight (g) 1860 - 1980 according to modification

Custom configurations also available. The bottom bracket is 68 mm wide, with BSAthread and 1 1/8" head assembly. Compatible with seatposts dia 27.2 mm. Discbrake modifications available. Convectional top pull front derailleur compatible, clampdia 31.8 mm.MORATI bicycle frames are compatible with worldwide standard component sizes.Natural titanium colour.Material: The frames are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

ABCDEF

The design of the frame is unique: chain stays are assigned without bolt on theflexible titanium plate. The plate supports functionality of the chainstays flexibilitywith excellent stiffness solidity of the whole frame. Central part of tte frame isunique designed, and this part emphasises exceptionally fine functionality and design.


GH

Soft Tail MTB frame

Flexible titanium plateMORATI B-B Box system

StratosStrata Proair shock

MORATI stays

I


MORATI bicycle frames have a sophisticated design that uses an oversize crossbar toassure high igidity of the triangle base. The design of the rear part of the frame isunique by its stiffness and support for the rear brake pivots. It easily meets andexceeds the strict parameters required for the use of hydraulic brakes.

Custom configurations also available. The bottom bracket is 68 mm wide, with BSAthread and 1 1/8" head assembly. Compatible with seatposts dia 27.2 mm. Theframe design allows using MORATI titanium fork. Disc brake modifications available.Convectional top pull front derailleur compatible, clamp dia 31.8 mm.MORATI bicycle frames are compatible with worldwide standard component sizes.Natural titanium colour.Material: The frames are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

Geometry 16" 17" 18" 19" 20"

Seat tube angle (degrees) 73° 73° 73° 73° 73°Head tube angle (degrees) 71° 71° 71° 71° 71°Size center to center (mm) 381 406 430 457 483Top tube lenght (mm) 550 560 568 578 579Seat tube lenght (mm) 431 456 480 507 533Chain stay lenght (mm) 425 425 425 425 425Wheel base (mm) 1048 1058 1065 1073 1075Head tube length (mm) 100 100 106 116 142Weight (g) 1475 - 1690 according to modification

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

ABCDEFGHI

Hard Tail MTB frame

MORATIB-B Box system

MORATI stays

MORATI seatpost clamp

Geometry 50 52 54 56 58 60

Seat tube angle (degrees) 74.2° 73.8° 73.6° 73.4° 73.4° 72.8°Head tube angle (degrees) 72° 72° 72° 72.5° 73° 73.2°Size center to center (mm) 500 520 540 560 580 600Top tube lenght (mm) 528 540 550 560 574 585Seat tube lenght (mm) 550 570 590 610 630 650Chain stay lenght (mm) 406 406 406 406 406 406Wheel base (mm) 979 988 996 1000 1010 1012Head tube length (mm) 101 120 140 157 176 193Weight (g) 1360 - 1580 according to modification

Custom configurations also available. The bottom bracket is 68 mm wide, with BSAthread, IT thread also available, and 1" head assembly, 1 1/8" also available.Compatible with seatposts dia 27.2 mm. The frame is delivered with Al seatpostclamp and with FD boss, w/o FD boss also available – front derailleur, clamp dia31.8 mm. Natural titanium colour.Material: The frames are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

ABCDEFG

All MORATI frames are typical by using oversize down tube assuring unusual stiffness.It assures the efficient power transfer in combination with unique ability to absorbvibrations, low weight, excellent durability and comfort. The geometry and designresulted from own development that combines the current design approaches withexperience of professional racers, who are our main source of improvements.

HI

framesFRAMESMORATI SC 1.1 Ti Pro Race

Road Frame

Seat stays

Frame end

Bottom bracket shell

Construction of the frames is based on using well-tried MORATI constructional elements- oversize down tube, semi sloping of top tube, bottom bracket box system andMORATI AAV concept. Using these constructional elements gives outstandingcharacteristics to the frame – both it gives to the frame maximum lateral stiffnessand it gives maximal comfort to the rider in consequence of high ability to absorbvibrations caused by roughness of the road.

Custom configurations also available. The bottom bracket is 68 mm wide, with BSAthread, IT thread also available, 1-1/8" head assembly, 1" also available. Compatiblewith seatposts dia 27.2 mm. The frame is delivered with Al seatpost clamp andwith FD boss, w/o FD boss also available – for front derailleur, clamp dia 31.8 mm.Natural titanium colour.Material: The frames are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

Geometry 54 56 58 60

Seat tube angle (degrees) 73.5° 73.2° 73.2° 73.2°Head tube angle (degrees) 72° 72.5° 73° 73.5°Size center to center (mm) 540 560 580 600Top tube lenght (mm) 550 560 575 588Sloping angle (degrees) 2.4° 2.4° 2.4° 2.4°Chain stay lenght (mm) 406 406 406 406Wheel base (mm) 987 990 1000 1009Head tube length (mm) 140 155 173 191Weight (g) 1450 - 1610 according to modification

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Road Frame

MORATI monostay

MORATI B-B box system

MORATIframe end

framesFRAMESMORATI SC1.2 Ti Pro Race

ABCDEFGHI

Light-Weight Forks

MTB, Cyclocross, Road

Crown

Breake pivots

CNC machining detailMTB, cyclocross and road forks MORATI bring the latest ideas to the world of solidforks by design, material and properties. Their stiffness, flexibility and unique abilityto absorb shocks and vibrations rank them among world class. The fork combinedwith MORATI frame create the optimal means for top performance. MORATI forks arebased on the original MORATI design. The production process is based on state-of-the-art technologies adopted from the aircraft industry, such as TIG welding in aprotective argon atmosphere, CNC water-jet cutting and CNC machining. The highquality of MORATI forks is assured by subjecting all products to chromatic crackdetection to check for microscopics fissures, as well as the use of X-rays for verificationof all exposed construction elements.

ConstructionMTB forks are designed for frames that are designed for suspension forks. MTB andcyclocross forks are produced in version V-Break, disc brake modifications available.Head tube diameter: MTB 1 1/8", Ccross 1", Road both 1" and 1 1/8".Weight: MTB cca 640 g, Ccross cca 590 g, Road cca 560 g.

Natural titanium colour.The forks are hand made of titanium alloys Ti3Al,2.5V and Ti6AL,4V.

forksFORKS

Stems

Bar clamp

stemsSEATPOSTSMTB, Road

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Titanium stems and seatposts are not only the addition to other MORATI products,but they bring the excellent aerospace quality to the area of smaller components.The original concept enables user to let the dreams about high-tech componentscome true. The high quality of MORATI stems is assured by subjectingall products to chromatic crack detection to check for microscopic fissures, as well asthe use of X-ray for verification of all exposed construction elements.

DesignStems are ahead-type produced in two basic types: MTB 1 1/8"and road 1". Customconfigurations also available. Bar clamp diameter is 25.4 mm for MTB, 25.8 forROAD. Natural titanium colour.Material:The components are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

Seat clamp

Head tube clamp CNC

STEM MTB 1 1/8" ROAD 1"Exstension L (mm) 110 - 140 80 - 140Raise (°) 5° -17°Weight (g) 150 - 195 150 - 195

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Handlebars, Bar ends

DesignMORATI Classic bars are 560/580 mm wide, with 25.4 mm Al central reduction.Weight: cca 180 g, bend 5°.

M - bars are 560 mm wide, weight: 310 - 350 g, angle 5°, bend 5°extension: 110, 120, 130 and 140 mm.A-head type 1 1/8"

Bar ends: Weight cca 115 g, dia 22.2 mm.

Natural titanium colour.

MaterialBars are hand made of titanium alloys Ti 3AL,2.5V and Ti 6AL,4V.

Equipment easyto assemble

Ergonomicalbar ends

Original CNC clamp

handlebarsHANDLEBARS

The MTB bicycle bars line brings, except of standard model, new look at the bardesign and functionality. Unique light design of the bars "M" replaces classicsystem of components. Excellent material properties of titanium assure optimumabsorption of vibrations and perfect steering of the bicycle.

M-bars + Bar ends

Classic

Classic, M-bars, Bar ends

Soft Tail MTB frame

geometryGEOMETRY

B

G

H

C

A

E

F

D

B

H

C

A

E

F

D

G

Hard Tail MTB / Road / Ccross frames

Product line and product dimensions are subject to change.

SC 1.2 Road frame

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

REFERENCES

MTB World Cup - men1. M. Martinez 19971. M. Martinez 19982. Ch. Dupouey 19974. L. Dubau 1997

MTB World Championship - men1. Ch. Dupouey 1998

MTB World Championship - men 231. M. Martinez 1998

MTB Europe Championship - men 231. M. Martinez 1998

Road Cycling World Championship - women3. H. Kupfernagel 1998

Cyclocross World Championship - men5. R. Simunek 19985. J. Pospisil 2001

MORATI components took part in the following excellent sport results:

Cyclocross World Championship - men 231. B. Wellens 19991. S. Vanthourenhout 20013. D. Kasek 2001

Cyclocross World Championship - juniors1. M. Bina 20012. R. Simunek jr. 20013. J. Kunta 2001

Cyclocross World Cup - men6. R. Simunek 19987. R. Simunek 19999. J. Pospisil 200110. J. Pospisil 1998

MTB Czech Cup - men1. M. Kankovsky 19981. L. Kondis 1999

MTB Czech Cup - women1. K. Neumannova 19982. K. Hanusova 19993. K. Neumannova 1999

MTB Czech Championship - men1. R. Korinek 19981. L. Kondis 19992. R. Korinek 1999

MTB Czech Championship - women1. K. Neumannova 19981. K. Neumannova 19991. K. Hanusova 20012. K. Neumannova 20013. K. Hanusova 1999

Cyclocross Czech Championship - men1. J. Pospisil 19961. R. Simunek 19971. R. Simunek 19981. J. Pospisil 1999

Mora Aerospace a.s., MORATI, Nadrazni 50, CZ-783 66 Hlubocky - Marianske Udoli, Czech Republice-mail: [email protected], www.morati.com

morati catalog 2-01

Documents