more than wireless rps - 600 - inkmachines...plete system to control and combine your tattoo...
TRANSCRIPT
![Page 1: More than wireless RPS - 600 - InkMachines...plete system to control and combine your tattoo machines whether it’s a Dragonfly, Stingray or a coil machine. RPS-600 Get in touch with](https://reader034.vdocument.in/reader034/viewer/2022043013/5facac3b4ee7c7326c17e28a/html5/thumbnails/1.jpg)
Developed by:
More than wireless
RPS - 600
![Page 2: More than wireless RPS - 600 - InkMachines...plete system to control and combine your tattoo machines whether it’s a Dragonfly, Stingray or a coil machine. RPS-600 Get in touch with](https://reader034.vdocument.in/reader034/viewer/2022043013/5facac3b4ee7c7326c17e28a/html5/thumbnails/2.jpg)
The RPS-600 wireless power supply is designed for tattoo-
ing without cords attached to the tattoo machines or the foot
switch. Powerpacks are made with leading edge battery
technology weighing only 65 grams designed not to interfere
with the hand more than the machine normally does. Once
the machines are rigged with Powerpacks the main unit will
sense which machine is picked up and recall the settings for
that machine. High capacity batteries allows aprox 5 hours
of effective running time* and charging takes about one hour.
Communications between the units are by radio for optimal
reliability and performance. To make the system complete
we incorporated functions like Kickstart and Boost mode.
Kick start allows the machines to start easy and run at low
voltage. Boost mode actively controls the voltage to main-
tain the same speed during various loads and increases the
machine power significantly. In short the RPS-600 is a com-
plete system to control and combine your tattoo machines
whether it’s a Dragonfly, Stingray or a coil machine.
RPS-600
Get in touch with usEMAIL [email protected]
WWW www.inkmachines.com
FACEBOOK www.facebook.com/InkMachines
TWITTER www.twitter.com/inkmachines
Copyright © Ink Machines, all rights reserved.
Specifications
Made In Sweden
Core benefits
Output Wireless 5-13V
Output Cable 4-18V
Compatibility by cable Various machines and foot switches
Connections ¼ phono (6.35mm)
LCD display 2.7” 60x33mm
Powerpack Weight 65g
Powerpack Capacity Aprox 5 hours each
Powerpack Battery life Aprox 500 charging cycles
Powerpack compatibility Dragonfly / Stingray
Powerpack Charging Aprox 1 hour
Footswitch Wireless included
USB YES (Only for software upgrades)
Operating temp 10-35 ̊C Indoor use only
• Wireless Powerpacks (battery packs) for Dragonfly
and Stingray
• Fits all existing original Dragonfly and Stingray machines
• Wireless foot switch with long life battery and
magnetic switch
• Hygienic and ergonomic, no cable to machines and no
brackets needed for the main unit
• Large LCD display with easy to use UI (user interface)
• High capacity batteries to handle the most
demanding sessions
• Activate by shaking (tilting) the machine. Powerpacks
recalls settings
• Handles up to 6 Powerpacks (wireless machines) + cable
machine(s)
• Built in kick start ensures startup at low voltage
• Boost mode = more power and torque when needed
• Runs regular coil and rotary machines with cord
• Easy to encapsulate machines and Powerpacks in
plastic bags
• USB connection for future software upgrades
* Effective running time means the actual time the machine
is running in air and skin during a typical session.
The RPS-600 is patent pending and design protected.